Related
My wife has a rooted nexus 7 2012 wifi and she unintentionally accepted the ota Android 4.3 update. So of course it unrooted her.
I originally had a hell of a time rooting this tablet using wugfresh nexus toolkit. Took me several days to succeed and the same thing is happening again. My Windows 7 laptop keeps installing the wrong drivers even though I selected the option to disable the auto driver configuration. Also USBDeview never shows the installed Samsung adb drivers yet when I try to install them I am warned they are already installed. It's already been hours and who knows how many retries and reboots!
So even though I'm a newbie I decided to go the Android sdk route.
1. Where do I download the files I need to just root the darn tablet?
2. What do I do next?
Please keep it simple........
Anyone want to walk me through it on the phone?
Thanks
If you are new to using SDK, check this out for a well laid out tut on how to get set up and rooted.
I now have android sdk set up.
What are the commands I should issue to root?
Thanks
now you need to flash a custom recovery then flash a root zip file via windows command prompt...Have you figured out how to interface with your device and the windows command prompt? eg;
-a good first command is "adb devices" and see if it lists your device, if it does your golden...
-then you would issue "adb reboot bootloader"
-once in bootloader you would issue "fastboot flash recovery whateverrecoveryouchose.img"
-then while in bootloader toggle with the volume keys to "recovery" option and press power
-now you will be in your new recovery you just flashed and you can push the zipped root file you chose to the sdcard, "adb push rootyouchose.zip /sdcard/"
-once its been pushed you can flash it in recovery and reboot, and you are now rooted
-this is the latest cwm recovery that you could flash in fastboot as described above
-this would be the root file you want to push then flash in recovery
-this may be of some help, scroll down halfway
Thank you so much for helping. You can't know how much it is appreciated.
-a good first command is "adb devices" and see if it lists your device, if it does your golden...
Got that. It works!!
-then you would issue "adb reboot bootloader"
Worked! Got the Android on his back.
-once in bootloader you would issue "fastboot flash recovery whateverrecoveryouchose.img"
Is recovery image on my pc or the tablet?
Why do I have to indicate the img name here if I will later select it
When I write
Fastboot flash......... Img
I get
Unknown partition 'the image file name'
"error : cannot determine image filename for. '.......'
You need to have downloaded a recovery image, that is what you flash I linked to one on my last post, that file is called "recovery-clockwork-touch-6.0.4.3-grouper.img" so you would issue,
fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img
"fastboot flash recovery" is telling it to flash a recovery file and "recovery-clockwork-touch-6.0.4.3-grouper.img" is the recovery file in this case to be flashed so, combined its, "fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img"
I do not use Windows, I use a terminal instead of windows command prompt so I can't be specific as I am not too familiar with windows command prompt. With terminal it is much easier in my opinion but you need to be running nix or Mac OS to have a terminal
OK, still can't get past the final stage in rooting my wife's nexus 2012 nexus 7.
I have the proper drivers installed and it connects fine with my Windows 7 laptop.
From a Windows 7 command prompt
1. "abd devices "
Correctly returns the attached nexus
2. "abd reboot bootloader "
Correctly reboots the tablet
3. **here's where things breakdown :
I downloaded the latest twrp openrecovery img for grouper and renamed it (for simpler typing)
" openrecovery-twrp-grouper.img"
However, when I now issue the command
"fastboot flash recovery openrecovery-twrp-grouper.img"
I get an error :
Cannot open openrecovery-twrp-grouper.img
The same thing happened with the clockwork-touch recovery img. That is why I downloaded the twrp img which I am more familiar with anyway.
So, am I missing a step between rebooting the bootloader and flashing the recovery? After the bootloader is rebooted and I get the Android on his back with an empty belly, do I need to do something else before flashing?
Do I need to put the recovery image somewhere special in the nexus file structure?
I'm stuck.
Thanks
Anderson2 said:
OK, still can't get past the final stage in rooting my wife's nexus 2012 nexus 7.
I have the proper drivers installed and it connects fine with my Windows 7 laptop.
From a Windows 7 command prompt
1. "abd devices "
Correctly returns the attached nexus
2. "abd reboot bootloader "
Correctly reboots the tablet
3. **here's where things breakdown :
I downloaded the latest twrp openrecovery img for grouper and renamed it (for simpler typing)
" openrecovery-twrp-grouper.img"
However, when I now issue the command
"fastboot flash recovery openrecovery-twrp-grouper.img"
I get an error :
Cannot open openrecovery-twrp-grouper.img
The same thing happened with the clockwork-touch recovery img. That is why I downloaded the twrp img which I am more familiar with anyway.
So, am I missing a step between rebooting the bootloader and flashing the recovery? After the bootloader is rebooted and I get the Android on his back with an empty belly, do I need to do something else before flashing?
Do I need to put the recovery image somewhere special in the nexus file structure?
I'm stuck.
Thanks
Click to expand...
Click to collapse
Hi, Anderson2...
If I may throw in my couple of cents...
The recovery.img file to be fastboot flashed (TWRP or CWM, it really doesn't matter which) needs be to stored on your PC... on the same PATH as the FASTBOOT.EXE file. The easiest way of accomplishing this, is to copy it directly into the folder that contains your FASTBOOT and ADB executables.
Where this folder is located on your PC depends on how you have fastboot setup, but it's usually stored in a folder called /Platform-Tools (if I remember correctly). But because I've never bothered myself installing the whole Android SDK (of which Fastboot is a part of) on my PC, I'm not sure of it's precise PATH (ie. it's location) but I think it's somewhere in the Android SDK folder.
For myself, I just maintain a simple folder on the Windows desktop containing the FASTBOOT.EXE and ADB.EXE files and a few necessary Windows .DLL files. When I wish to fastboot flash a Custom Recovery, I simply copy the Custom Recovery .img file (TWRP or CWM) into this folder, rename it to recovery.img (renaming it thus makes typing at the command prompt easier, and reduces the scope for potential typos)... boot the Nexus 7 into the bootloader, hook it up to my PC via USB. And then open a command prompt on the folder, and run...
Code:
fastboot devices
This is purely diagnostic, and hopefully confirms a working fastboot connection.
You should see something like this...
Code:
025d2d424bxxxxx fastboot
A serial number followed by the word fastboot. If you see this, you can go ahead and run...
Code:
fastboot flash recovery recovery.img
(This command assumes an unlocked bootloader... indicated by an unlocked padlock symbol under the Google logo upon boot. If it isn't, you should unlock it with fastboot oem unlock BEFORE fastboot flashing the Custom Recovery).
My point is, though... the 'recovery.img' to be flashed must be in the same folder as the FASTBOOT.EXE file, or as you have discovered, you will get the error "Cannot open recovery-twrp-grouper.img".
If fastboot can't find it.. it can't open it.
Hope this helps.
Rgrds.
Ged.
GedBlake said:
Hi, Anderson2...
If I may throw in my couple of cents...
The recovery.img file to be fastboot flashed (TWRP or CWM, it really doesn't matter which) needs be to stored on your PC... on the same PATH as the FASTBOOT.EXE file. The easiest way of accomplishing this, is to copy it directly into the folder that contains your FASTBOOT and ADB executables.
Where this folder is located on your PC depends on how you have fastboot setup, but it's usually stored in a folder called /Platform-Tools (if I remember correctly). But because I've never bothered myself installing the whole Android SDK (of which Fastboot is a part of) on my PC, I'm not sure of it's precise PATH (ie. it's location) but I think it's somewhere in the Android SDK folder.
For myself, I just maintain a simple folder on the Windows desktop containing the FASTBOOT.EXE and ADB.EXE files and a few necessary Windows .DLL files. When I wish to fastboot flash a Custom Recovery, I simply copy the Custom Recovery .img file (TWRP or CWM) into this folder, rename it to recovery.img (renaming it thus makes typing at the command prompt easier, and reduces the scope for potential typos)... boot the Nexus 7 into the bootloader, hook it up to my PC via USB. And then open a command prompt on the folder, and run...
Code:
fastboot devices
This is purely diagnostic, and hopefully confirms a working fastboot connection.
You should see something like this...
Code:
025d2d424bxxxxx fastboot
A serial number followed by the word fastboot. If you see this, you can go ahead and run...
Code:
fastboot flash recovery recovery.img
(This command assumes an unlocked bootloader... indicated by an unlocked padlock symbol under the Google logo upon boot. If it isn't, you should unlock it with fastboot oem unlock BEFORE fastboot flashing the Custom Recovery).
My point is, though... the 'recovery.img' to be flashed must be in the same folder as the FASTBOOT.EXE file, or as you have discovered, you will get the error "Cannot open recovery-twrp-grouper.img".
If fastboot can't find it.. it can't open it.
Hope this helps.
Rgrds.
Ged.
Click to expand...
Click to collapse
Thank you very much! That is very helpful. I had assumed the recovery img should be on the tablet. No wonder fastboot could not find it! I'm sure that will solve my problem.
Thank you for helping. I'm slowly learning my way around the adb, fastboot commands as I'm sure I'll need them again when 4.4 unroots me again.
Anderson2 said:
Thank you very much! That is very helpful. I had assumed the recovery img should be on the tablet. No wonder fastboot could not find it! I'm sure that will solve my problem.
Thank you for helping. I'm slowly learning my way around the adb, fastboot commands as I'm sure I'll need them again when 4.4 unroots me again.
Click to expand...
Click to collapse
No, problem Anderson2... glad to help.
Adb and fastboot are indeed powerful and useful tools, and I would strongly recommend anybody wishing to 'modify' their Nexus 7 (everything from rooting to flashing Custom ROMs) to familiarise themselves with the fundamentals of their operation... rather than relying on toolkits.
There are actually ways of flashing TWRP or CWM Custom Recoveries directly from the Nexus 7 itself, without recourse to either fastboot or the need for a PC... by using apps like Flash Image GUI or Flashify. But these apps need you to be already rooted, unfortunately.
So to summarize how to acquire root the old fashioned way....
---------------------------------------
1). Unlock the bootloader first with fastboot oem unlock. For security reasons, this will factory reset the device... ie., WIPE everything on it.
...but I assume your Nexus 7's bootloader is already unlocked, given it's been rooted once before.
And so swiftly skipping forward to step 2...
2). Fastboot flash a Custom Recovery (CWM or TWRP) with fastboot flash recovery recovery.img... where 'recovery.img' is the Custom Recovery of your choice. Reboot the device by using the Custom Recovery's own reboot option.
3). Download Chainfire's UPDATE-SuperSU-v1.65.zip root package directly to your Nexus 7. This DOES need to be on the Nexus 7. Most Android browsers (including Chrome) download stuff to the /download folder on the devices internal storage. You'll need to remember the location, for when you come to flash it with either CWM or TWRP.
4). Boot the Nexus 7 into the bootloader. Although you can do it with adb reboot bootloader, you can also do it manually as follows...
- Shut down the Nexus 7 completely.
- Press and hold the VOL-DOWN button... whilst holding, press the POWER-ON button for about 5-10 seconds. The device should now boot into the bootloader.
5). Boot into your Custom Recovery... whilst in the bootloader, use the VOL-KEYS to navigate to the RECOVERY MODE option, and press the POWER BUTTON to select. The device will now boot into either CWM or TWRP Custom Recovery.... whichever one you fastboot flashed earlier.
6). Now to ROOT!
** If using TWRP... tap on the INSTALL button, and then navigate to the /download folder on the Nexus 7's internal storage, and where Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on it, and Swipe to Confirm Flash.
** If using CWM... tap on the INSTALL ZIP option, followed by CHOOSE ZIP FROM /SDCARD... tap on the folder 0/... this gives you access to the internal storage of the Nexus 7... from which you can navigate to the /download folder, where again, Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on NO (the first default option) or YES - Install UPDATE-SuperSU-v1.65.zip.
On every screen in the CWM filemanager (by which you navigate) there is ALWAYS a ++++Go Back++++ option at the bottom of the screen. So you can always backout out of anything. In CWM you can also use the VOL UP and DOWN keys to scroll, with the POWER-BUTTON to select an option.
Once you have flashed Chainfire's SuperSU root package, reboot the device with the Custom Recovery's own reboot option.
Upon reboot, and whichever Custom Recovery you're using , it ***MIGHT*** suggest you are unrooted... and offer to fix root for you. Ignore it, and continue to reboot.
---------------------------------------
And that's it... that's how you root a first generation Nexus 7 (2012).
Hope this is of use and... Good luck.
Rgrds,
Ged.
GedBlake said:
No, problem Anderson2... glad to help.
Adb and fastboot are indeed powerful and useful tools, and I would strongly recommend anybody wishing to 'modify' their Nexus 7 (everything from rooting to flashing Custom ROMs) to familiarise themselves with the fundamentals of their operation... rather than relying on toolkits.
There are actually ways of flashing TWRP or CWM Custom Recoveries directly from the Nexus 7 itself, without recourse to either fastboot or the need for a PC... by using apps like Flash Image GUI or Flashify. But these apps need you to be already rooted, unfortunately.
So to summarize how to acquire root the old fashioned way....
---------------------------------------
1). Unlock the bootloader first with fastboot oem unlock. For security reasons, this will factory reset the device... ie., WIPE everything on it. I assume your bootloader is already unlocked.
So swiftly skipping forward to step 2....
2). Fastboot flash a Custom Recovery (CWM or TWRP) with fastboot flash recovery recovery.img... where 'recovery.img' is the Custom Recovery of your choice. Reboot the device by using the Custom Recovery's own reboot option.
3). Download Chainfire's UPDATE-SuperSU-v1.65.zip root package directly to your Nexus 7. This DOES need to be on the Nexus 7. Most Android browsers (including Chrome) download stuff to the /download folder on the devices internal storage. You'll need to remember the location, for when you come to flash it with either CWM or TWRP.
4). Boot the Nexus 7 into the bootloader. Although you can do it with adb reboot bootloader, you can also do it manually as follows...
- Shut down the Nexus 7 completely.
- Press and hold the VOL-DOWN button... whilst holding, press the POWER-ON button for about 5-10 seconds. The device should now boot into the bootloader.
5). Boot into your Custom Recovery... whilst in the bootloader, use the VOL-KEYS to navigate to the RECOVERY MODE option, and press the POWER BUTTON to select. The device will now boot into either CWM or TWRP Custom Recovery.... whichever one you fastboot flashed earlier.
6). Now to ROOT!
** If using TWRP... tap on the INSTALL button, and then navigate to the /download folder on the Nexus 7's internal storage, and where Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on it, and Swipe to Confirm Flash.
** If using CWM... tap on the INSTALL ZIP option, followed by CHOOSE ZIP FROM /SDCARD... tap on the folder 0/... this gives you access to the internal storage of the Nexus 7... from which you can navigate to the /download folder, where again, Chainfires UPDATE-SuperSU-v1.65.zip is awaiting. Tap on NO (the first default option) or YES - Install UPDATE-SuperSU-v1.65.zip.
On every screen in the CWM filemanager (by which you navigate) there is ALWAYS a ++++Go Back++++ option at the bottom of the screen. So you can always backout out of anything. In CWM you can also use the VOL UP and DOWN keys to scroll, with the POWER-BUTTON to select an option.
Once you have flashed Chainfire's SuperSU root package, reboot the device with the Custom Recovery's own reboot option.
Upon reboot, and whichever Custom Recovery you're using , it ***MIGHT*** suggest you are unrooted... and offer to fix root for you. Ignore it, and continue to reboot.
---------------------------------------
And that's it... that's how you root a first generation Nexus 7 (2012).
Hope this is of use and... Good luck.
Rgrds,
Ged.
Click to expand...
Click to collapse
Thank you all very much. I greatly appreciate your help.
This post should be a sticky!
One more question, this nexus 7 2012 is my wife's. But I also own a nexus 7I this one a 2013 which is currently rooted with Android 4.3 and twrp Nandroid backups. I'm afraid that when the 4.4 ota upgrade comes along it might again unroot both our tablets. Are the rooting commands or procedures different for the 2013 nexus 7 (other than using a flo recovery img,) or do I do exactly the same as described above?
Again, you guys are wonderful to help us newbies out. Many thanks to all. Wish I could do something in return.
Anderson2 said:
Thank you all very much. I greatly appreciate your help.
This post should be a sticky!
One more question, this nexus 7 2012 is my wife's. But I also own a nexus 7I this one a 2013 which is currently rooted with Android 4.3 and twrp Nandroid backups. I'm afraid that when the 4.4 ota upgrade comes along it might again unroot both our tablets. Are the rooting commands or procedures different for the 2013 nexus 7 (other than using a flo recovery img,) or do I do exactly the same as described above?
Again, you guys are wonderful to help us newbies out. Many thanks to all. Wish I could do something in return.
Click to expand...
Click to collapse
Hello again, Anderson2...
Well, you sort of are already doing something in return.... you're asking questions.
Questions that require answers. Those answers, whoever posts them, may be of assistance to somebody else. Somebody else looking for a solution to a similar problem.
I always look upon these forums as a means of sharing. Not everybody can know everything. God knows, I don't know everything.... and I've been messing around with Android for three years now. So don't worry so much about it being a quid pro quo sort of arrangement.
I know what I know primarily as a result of my own experiences and what I've learned here from the many (in most cases, more knowledgeable) posters here on XDA. What you learn today, you can pass on to others, tomorrow (metaphorically speaking). We, all of us, stand on the shoulders of each other.
With regard to the second generation Nexus 7 (2013)... I'm afraid I really don't know much about it... but I'd be surprised if rooting it deviated significantly from rooting the first generation Nexus 7....
Namely...
1). Unlock the bootloader.
2). Flash a Custom Recovery.
3). Using that Custom Recovery, flash some SU root package... probably from Chainfire.
Anyway, I've found this tutorial here...
http://forum.xda-developers.com/showthread.php?t=2382051
...and it appears to follow a very similar template.
The Nexus 7 (2013) forum itself, which is also worth visiting, is located here....
http://forum.xda-developers.com/nexus-7-2013
Rgrds,
Ged.
Hi.
First I have to apologize for being a noob, and if I am posting questions that has already been answered. I can't post these question in the original thread about F2FS file system, so I am posting this here.
I am currently running stock Android 4.4.4 on my Nexus 7 WiFi (2012), and because it has become very slow, I want to root, install Cyanogenmod and use F2FS file system.
I have used CWM-recovery and installed custom roms on a Huawei device before, so I have some experience with this. I have also some experience with Linux and using ADB. But I don't want to brick my Nexus 7, so I have some questions before I start:
I want to unlock the bootloader and install custom recovery. I want to avoid using toolkits, as I don't know what they installs on my Nexus 7. I found a tutorial here that I am using, but I am not 100% sure if I am following the correct steps?:
1. Install SDK and drivers
2. Enable Debug on the Nexus 7
3. Download CWM-recovery to the same directory as adb.exe on my PC running Windows 8.1
4. With CMD: run command "adb reboot bootloader" then run command "fastboot oem unlock" (I know this will delete all data on my Nexus 7)
5. After unlocking, flash CWM-recovery with the steps from the tutorial: run command "fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img".
6. Permanent flash CWM-recovery: mount "/System" and rename/backup "recovery-from-boot.p" with the command "mv recovery-from-boot.p recovery-from-boot.bak" (Is this step necessary? I have seen other tutorials skipping this step.)
7. Backup everything from recovery, and move the backup from the Nexus 7 to my PC. (I don't know if this step is necessary, but I'll do it anyway)
Are these seven steps above correct, or am I missing something? If the steps above are correct, then can I now install CM11 Snapshot M7 with F2FS with these steps?:
1. Download and copy "CM11.zip", "gapps.zip" and "LegoKernel-F2FS-140228.zip" from PC to Nexus 7, then install them from CWM-recovery.
2. Download "recovery-F2FS-A.img" to the same directory as adb.exe
3. Reboot the Nexus 7 into Android(CM11), activate Debug, run command "adb reboot bootloader" then flash custom TWRP with the command "fastboot flash recovery recovery-F2FS-A.img"
4. Reboot into TWRP-recovery, go to Wipe menu and format data.
5. Reboot into Android(CM11)
Will these seven+five steps work, or am I missing something? I don't want to brick my Nexus 7, so if someone could verify that these steps is correct, that would be great.
And one more question: Can I change back to CWM-recovery without losing the F2FS file system, or should I just use TWRP?
~Liloolil
Hi!
Liloolil said:
I am currently running stock Android 4.4.4 on my Nexus 7 WiFi (2012), and because it has become very slow, I want to root, install Cyanogenmod and use F2FS file system.
I have used CWM-recovery and installed custom roms on a Huawei device before, so I have some experience with this. I have also some experience with Linux and using ADB. But I don't want to brick my Nexus 7, so I have some questions before I start:
I want to unlock the bootloader and install custom recovery. I want to avoid using toolkits, as I don't know what they installs on my Nexus 7. I found a tutorial here that I am using, but I am not 100% sure if I am following the correct steps?:
1. Install SDK and drivers
2. Enable Debug on the Nexus 7
3. Download CWM-recovery to the same directory as adb.exe on my PC running Windows 8.1
4. With CMD: run command "adb reboot bootloader" then run command "fastboot oem unlock" (I know this will delete all data on my Nexus 7)
5. After unlocking, flash CWM-recovery with the steps from the tutorial: run command "fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img".
6. Permanent flash CWM-recovery: mount "/System" and rename/backup "recovery-from-boot.p" with the command "mv recovery-from-boot.p recovery-from-boot.bak" (Is this step necessary? I have seen other tutorials skipping this step.)
7. Backup everything from recovery, and move the backup from the Nexus 7 to my PC. (I don't know if this step is necessary, but I'll do it anyway)
Click to expand...
Click to collapse
The tutorial sounds ok to me even though adb is not even needed to unlock the bootloader and flash a new recovery.
Instead you might need "fastboot" for this. Oh and I would use TWRP instead of CWM on the Nexus 7 (it includes F2FS support out of the box):
Code:
fastboot oem unlock
fastboot flash recovery openrecovery-twrp-2.7.1.1-grouper.img
Liloolil said:
Are these seven steps above correct, or am I missing something? If the steps above are correct, then can I now install CM11 Snapshot M7 with F2FS with these steps?:
1. Download and copy "CM11.zip", "gapps.zip" and "LegoKernel-F2FS-140228.zip" from PC to Nexus 7, then install them from CWM-recovery.
2. Download "recovery-F2FS-A.img" to the same directory as adb.exe
3. Reboot the Nexus 7 into Android(CM11), activate Debug, run command "adb reboot bootloader" then flash custom TWRP with the command "fastboot flash recovery recovery-F2FS-A.img"
4. Reboot into TWRP-recovery, go to Wipe menu and format data.
5. Reboot into Android(CM11)
Will these seven+five steps work, or am I missing something? I don't want to brick my Nexus 7, so if someone could verify that these steps is correct, that would be great.
And one more question: Can I change back to CWM-recovery without losing the F2FS file system, or should I just use TWRP?
~Liloolil
Click to expand...
Click to collapse
As long as you can boot through fastboot, it should be ok to make experiments. I don't think that you can brick the device permanently.
Your tutorial again sounds good but I would choose a few different files instead. LegoKernel is from February 2014, there are other kernels in newer versions available...
I have just posted a howto for this in another thread: http://forum.xda-developers.com/showpost.php?p=54004629&postcount=3342
Good luck!
michael_ch said:
Hi!
The tutorial sounds ok to me even though adb is not even needed to unlock the bootloader and flash a new recovery.
Instead you might need "fastboot" for this. Oh and I would use TWRP instead of CWM on the Nexus 7 (it includes F2FS support out of the box):
Code:
fastboot oem unlock
fastboot flash recovery openrecovery-twrp-2.7.1.1-grouper.img
As long as you can boot through fastboot, it should be ok to make experiments. I don't think that you can brick the device permanently.
Your tutorial again sounds good but I would choose a few different files instead. LegoKernel is from February 2014, there are other kernels in newer versions available...
I have just posted a howto for this in another thread: http://forum.xda-developers.com/showpost.php?p=54004629&postcount=3342
Good luck!
Click to expand...
Click to collapse
Thank you! I have now successfully rooted and installed CM11 on my Nexus 7.
I have been asked to port my "Beginners Guide" from the TF700 forum for the TF300. Since both tablets are very similar, that was not too hard to do
If I have missed to update a link specific for the TF300, do let me know please.
And the standard disclaimer: I am not responsible if you misunderstand instructions I give here, if my instructions are wrong, if you forget to charge the battery and the tablet dies halfway through a flash or if your house goes up in flames. YOU DO THIS AT YOUR OWN RISK
These instructions assume that you are on the latest Asus bootloader: 10.6.1.27.5
To determine which bootloader you currently have:
From an "Off" state, boot the tablet with Volume Down and Power into the bootloader menu. Read the small script in the upper left. You'll see
US_epad-10.6.1.27.5-20130801" or similar.
US or WW, JP, CN is your SKU or region
10.6.1.27.5 is your bootloader version
20130801 is the build date (and immaterial in most cases).
First things first:
Backup everything on your tablet you care about to an external microSD or your PC. Don't worry about your apps. You can always install them from the Play Store.
This is just common sense. It is not inherently risky to flash custom ROMs. But something can wrong at any time and you have to be careful. If you are, this is a safe procedure.
Basically the process of flashing a custom ROM on the TF300 involves three steps:
1) Unlock the bootloader using Asus' Unlock tool
2) Install a custom recovery on the tablet
3) Flash a custom ROM of your choice using said custom recovery
Unlocking the bootloader
Your tablet should be fully charged at this point!
Make sure "USB debugging" is checked in Settings > Developer Options (if you don't see it, go to About Tablet and tap 7 times on Build Number)
Go to Asus website: https://www.asus.com/support/Download/28/1/0/9/8BmzkQ4yoz5WzBrW/32/
Choose "Android" for OS and look for the "Utilities" on the resulting page.
Download the Asus Unlock Tool v7 (not v8! It says v7 is for ICS but it'll work fine on JB - see below)
The tool downloads as a .rar file which is an archive you have to decompress. 7zip is a free and very good Windows tool that will do it for you
On your tablet, in Settings > Security check "Unknown Sources"
Copy the .apk you extracted from the .rar archive to your tablet.
Find the apk in your tablet's file browser, tap it and let it install
Open the app and follow the instructions. You will loose your warranty as soon as you click "I agree".
Update 2/15: Google added another wrinkle: It now checks even sideloaded apps and refuses to install them if they are considered not secure. The Unlock tool seems to fail their test. v8 does not install at all anymore. v7 will install if you allow "less secure apps" in your Google account settings. On the web - not your Google account on the tablet
July 2015: And another wrinkel... It seems to be pretty consistent now that the Unlock Tool hangs on the Google account password step. I suspect something changed on the Google side. It probably doesn't allow the tool to check/compare the password anymore. There have been quite a few security changes lately and the unlock tool never gets updated so I suspect that Google now is blocking access by the tool to it's servers.
The work-around is easy enough: Delete the Google account from the tablet (Settings > Accounts), then run the tool again. If that doesn't do it, do a factory reset from Settings, reboot and during the initial setup establish a WiFi connection but skip the google account setup, then run the tool
Click to expand...
Click to collapse
This can be a 5 Minute operation that goes without a hitch or a very frustrating experience with lots of error messages. There is no definite rhyme or reason for this. For some people it works like a charm, for others it works after 15, 25 or 55 attempts, for some never.... This problem is widely discussed on several forums. Google it if you hit that roadblock.
To check if you are unlocked, boot the tablet and read the tiny script. It should say:
The device is unlocked.
Installing a custom recovery on your tablet
I highly recommend you choose TWRP as your custom recovery. If you want CWM, you are on your own.
To push TWRP to your tablet you need to set up "Fastboot" between your tablet and your PC. Fastboot is a protocol that enables you low level access to your tablet.
Practice/Background
Power down your tablet and disconnect it from the dock
Push and hold the Volume Down key (left side of the rocker) and the Power key until you feel the tablet vibrate twice. Let go when you see the tiny script. Read it and it tells you that your tablet is now in fastboot mode and you will see three icons (I assume again you are on a JB 4.2 bootloader. In older bootloaders you had 4 icons and had to select the USB icon to get into fastboot mode):
RCK - (which should be flashing) is your recovery (the stock recovery at this point, but once TWRP is installed this is one way to get into it)
Android - is your system, selecting it boots you back to into your ROM.
Wipe Data - stay away! Especially with custom software installed never, ever use this option!
To toggle between the three icons use Volume Down, to select one use Volume Up. Try it but do not push Volume Up when the 'Wipe data' icon is flashing!
Installing ADB and fastboot plus the necessary drivers
For a working ADB/fastboot connection from PC to tablet you need:
a) Asus device drivers – if you connect the tablet to your PC and it's recognized as a portable device you should be ok. If not, download the Asus Sync Utility from their support/downloads site and install it to get the drivers, then uninstall the program from your PC if you don't want it. The drivers will stay.
b) Fastboot and ADB drivers which will be installed if you run the tool below.
Windows Vista, 7, 8, 10:
Download and run this cool little tool [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.1 - xda-developers (don't forget to hit the Thanks button)
The tool installs the adb and fastboot.exe to a folder on your C:\ drive (look for adb) and the corresponding drivers. Takes about 15 seconds.
On Windows 8 and 10 you need to turn off the driver verification feature. Here's a great video on how to do it:
https://www.youtube.com/watch?v=afrvSGiMAtk
Or - even better - here's a quick command line toggle to achieve the same (thank you @Jack_Hardin):
Jack_Hardin said:
If you're running W10, you can disable Device Driver Signing without following the procedure in the linked video, but by (more simply) right-clicking on the Start button, selecting Command Prompt (Admin) and then typing:
Code:
BCDEDIT /set nointegritychecks ON
Doing the same with OFF at the end of the string, as easy to guess as it looks, will reenable them.
Click to expand...
Click to collapse
Jack_Hardin said:
Win XP (and all other Win versions if the above does not work for some reason)
I recommend the "ADB Install Tool" mentioned above or the 'Minimal ADB Fastboot Tool': [TOOL]Minimal ADB and Fastboot [7-18-13] - xda-developers
Either works fine.
If you need the drivers, get them here and install manually in Device Manager:[ADB/FB/APX Driver] Universal Naked Driver 0.72 (We dont need no stinking HTC Sync) - xda-developers
Win7 and Win8 users seem to have the best luck wth the drivers sbdags provided here: http://forum.xda-developers.com/showthread.php?t=2646279
It's fine if you want to use his Recovery Install Tool from that thread. But I highly recommend you familiarize yourself with basic fastboot commands! There are lots of tuturials all over the web.
Linux:Check out this site https://code.google.com/p/adb-fastboot-install/
iOS:[GUIDE] Set up ADB and Fastboot on a Mac easily (With Screenshots!) - xda-developers or:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
The fun begins
Fastboot does not play well with USB 3.0, so use a USB 2.0 port for this. And no hubs and such....
Boot the tablet into fastboot mode and connect it to your computer via the original USB cable
In Windows Explorer navigate to the folder that contains your adb.exe and fastboot.exe
Win 7/8: Shift + right click and select "Open command window here".
For Win XP click here
select 'Run' from the Start menu, type
Code:
cmd
and hit Enter. In the resulting command prompt type
Code:
cd C:\adb\ [I](or whatever the path to your fastboot folder is..)[/I]
In the command window on your PC type:
Code:
fastboot devices
If that command returns a string of numbers and letters, you are good as gold.
Click me: View attachment 3070087
If it returns: "No devices found", fastboot is not working - yet - and you have to troubleshoot.
Getting the correct drivers working can be the hardest part of this exercise. If your computer does not "see" the tablet in fastboot, try to uninstall the existing driver (if any) in Device Manager and manually install the drivers I linked to above. And if Windows does not cooperate at all, PM me and I can hook you up with a Puppy Linux live CD with fastboot/adb set up already.
Let's assume everything is good:
On your computer go here: https://dl.twrp.me/tf300t/
Download the latest version of TWRP.
FYI ONLY: If, for whatever reason, you want to format your data partition:
Formatting /data starting with TWRP 2.7.x and later takes a lot longer than in previous versions (up to 90 minutes). LET IT FINISH. DO NOT INTERRUPT THE FORMATTING.
Rename the file to twrp.blob and place it into the same directory as your fastboot.exe. Note: More recent versions of TWRP download with an .img extension. Leave the extensions as is, rename the first part to watever is easy to type
Again check the connection with
Code:
fastboot devices
If you get the connection, in the command window type:
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
or
Code:
fastboot -i 0x0B05 flash recovery twrp.img
This will flash the recovery to the recovery partition
If it is successful type:
Code:
fastboot reboot
and let the tablet boot up normally.
You may get a dialog in TWRP offering to root the stock rom. You can accept or cancel it - doesn't matter. I assume you are going to install a custom rom and they are rooted anyway.
Create a nandroid
Your almost there! You are now on the stock ROM with a custom recovery installed.
Power the tablet down and boot into the bootloader menu with Volume Down and Power buttons.
With RCK flashing, push Volume Up and you should boot into TWRP. Familiarize yourself with the many options of the touch based interface without executing anything yet. TWRP is very user friendly. You basically cannot do anything of consequence "by accident", so don't be shy.
To create your Nandroid (a full system backup) touch "Backup", leave the default selection as they are and swipe the button to create a nandroid of your current system.
This is a very healthy habit to develop: You always want to have a nandroid of your last working system squared away so that you can do a simple restore if you flash something that does not work, or something goes wrong during a flash. With a working recovery and a good nandroid you are minutes away from a working system if you soft brick your tablet.
Hint:
It's a good idea to have at least one good nandroid on external media. Sooner or later you will format your data partition and if you're like me, you may forget to backup your nandroids in the heat of the moment..
Installing a custom ROM
From here on out it's as easy as downloading the installation file of your custom ROM, booting into TWRP, choosing "Install" and navigating to the zip of the ROM you want to flash.
If you see a "signed" in the zip file name (best_rom_ever_signed.zip), make sure you check "verify zip signature" under the "Install" menu. Some devs sign their ROM zips - a better way to ensure file integrity than md5 sum.
Whatever you decide to flash: READ THE OP of the corresponding thread and make sure you have the correct bootloader and the required recovery installed! I can't stress this enough! If you are not sure, DO NOT FLASH!
Look for the ROMs in the Development section of the XDA forum for this tablet: http://forum.xda-developers.com/transformer-tf300t/development
It is mandatory to do a Factory Wipe in TWRP before installing a custom ROM or going from one ROM base to another (a so called clean install).
If you choose 'Wipe' in TWRP, all you have to do is swipe the button - 'Factory Wipe' is the default selection under the 'Wipe' menu. You will loose your apps, but it will not wipe your /data/media/ folder where your files, pictures, etc live.
If you do this right before flashing the custom ROM, make sure you have the zip file of your custom ROM on your microSD - not on your internal SD where it may get wiped....
Once you installed a custom recovery NEVER EVER UNDER ANY CIRCUMSTANCES - AND I REPEAT: NEVER! - use the 'Wipe Data' option from the bootloader menu or the "Factory Reset" option in Settings > Backup&Restore.
In your custom recovery you have the option to wipe, backup and restore every partition on your tablet selectively or collectively. Any wiping, any backup and any restore of the system, data, recovery or boot partitions MUST be done in your recovery (or in fastboot)!
You can safely use Titanium Backup or Asus Backup for apps and settings, but that's it. For everything else use your recovery.
FREE ADVICE
There are alternative methods to flash a recovery to your device using apps like GooManager (currently not supported anyway), TWRP Manager or Flashify from the Play Store which do it right from your tablet. These apps "save you the trouble" of getting ADB and fastboot set up and working on your PC. These methods still exist and they do work - mostly - and if you have root. But I would not recommend them.
If you are not willing to invest the time to learn the basics about ADB and fastboot (google "adb fastboot xda tutorial") and install the necessary drivers on your PC, you should not be flashing anything to your tablet!
GET ADB AND FASTBOOT WORKING!
Sooner or later you will do something stupid (I have done it and so will you) and ADB/fastboot may save your bacon IF you had it working when you didn't really need it.
Hit the 'Thanks' button and rate the thread 5 stars if this helped you
Click to expand...
Click to collapse
Save it for later
Mine
sbdags said:
@stamatis could we sticky this please.
Brilliant post Bernd :good:
Click to expand...
Click to collapse
Can we make that happen here to @stamatis
Thx Josh
Nice one Bernd! :good::good:
boot sequence
Hi,
Is normal to see three TUX and some phrases at the power on ?
Can I hide it ?
tnkx
Nicola
You mean the penguins?
That's normal I'd you're running a Rom that uses _that's preinit scripts. You can't hide them - why would you?
thank you SO much
I love you!
Wow, I've never had so much trouble rooting a device before! And days ago, I rooted my T700 without any problems. So, I guess I should have expected the hubby's TF300T to be problematic! Recoveries didn't work, I tried multiple ones. Eventually, I had a recovery that didn't recognize any partitions. I used fastboot to erase them all and put the stock ROM back on--wouldn't boot up. This thread was an immense help! I've moved the other recoveries and ROMs into my non-working folder!
Thanks again!
Lynne
Awesome
What a well written guide! I have a decent understanding of fastboot and adb (although minimal experience), and I perfectly understood every step.
My advice to all newbies like me.... Read stuff ALL of the way through (and understand it), BEFORE stepping off in it.
ok im a bit lost... i have rooted both Nexus 7s, nook hd and hd+, a tf101, and a few tv boxes.. so im not sure why this is hanging up... im trying to root and install the TWRP recovery on a tf300... followed the instructions and even have the char string that means... every thing should be good to go.... have checked that the twrp is in the dir of adb... but when i try to push the twrp.blob to the tf300, it just give me.. this error..
c:\adb>fastboot devices
015d14febf64041b fastboot
c:\adb>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (6800 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.002s
so.. at this point i not sure what else to trouble shoot... the tablet is in fastboot mode.. adb sees the tablet.. at least that is what the char string confirms.... so any help would be very much appreciated.. just a bit lost on this...
chris
scuzzo said:
ok im a bit lost... i have rooted both Nexus 7s, nook hd and hd+, a tf101, and a few tv boxes.. so im not sure why this is hanging up... im trying to root and install the TWRP recovery on a tf300... followed the instructions and even have the char string that means... every thing should be good to go.... have checked that the twrp is in the dir of adb... but when i try to push the twrp.blob to the tf300, it just give me.. this error..
c:\adb>fastboot devices
015d14febf64041b fastboot
c:\adb>fastboot -i 0x0B05 flash recovery twrp.blob
sending 'recovery' (6800 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.002s
so.. at this point i not sure what else to trouble shoot... the tablet is in fastboot mode.. adb sees the tablet.. at least that is what the char string confirms.... so any help would be very much appreciated.. just a bit lost on this...
chris
Click to expand...
Click to collapse
The bootloader is unlocked yes ?
What is your bootloader version ?
Try a different USB port ?
Thx Josh
lj50036 said:
The bootloader is unlocked yes ?
What is your bootloader version ?
Try a different USB port ?
Thx Josh
Click to expand...
Click to collapse
hello,
bootloader is unlocked or at least it says it is at the boot screen.. "your device is unlocked"..
real time... just swapped ports... its says it pushed the recovery.... so... will continue along this path.... and see how it goes.... i think its good to go... just as you suggested... port swap... cool... i bought this just so i could root it and put the kit kat kis rom on it.... thanks for your help and big ups to OP.... great guide ...
thanks again.!
Nice guide!
I've been wanting to put a custom rom on my transformer for a long time. This guide worked like a charm.
The only problem I had was when I tried to flash TWRP recovery, but switching USB port fixed that problem.
I flashed the latest CM12.1 nightly and it works fine.
Many thanks!
Help please, I'm stuck!
I'm trying to flash recovery,
after typing:
fastboot -i 0x0B05 flash recovery twrp.blob
I got this on tablet screen:
"Starting Fastboot USB download protocol"
for about 25-30 already and nothing happens, any ideas?
thanks
You won't see anything on the tablet screen, but what does the command window say?
Go back, read the guide again, it's all in there....
Sent from my K00C using Tapatalk
berndblb said:
You won't see anything on the tablet screen, but what does the command window say?
The command window didn't say anything, just blinking cursor after my command line
Go back, read the guide again, it's all in there....
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Mishka79 said:
I'm trying to flash recovery,
after typing:
fastboot -i 0x0B05 flash recovery twrp.blob
I got this on tablet screen:
"Starting Fastboot USB download protocol"
for about 25-30 already and nothing happens, any ideas?
thanks
Click to expand...
Click to collapse
Thanks,
After writing the question, I've restarted my tablet and did all the steps again.
The second time everything worked as it should. :good:
thanks for your great guide
Really great guide
Amazing guide thanks for the help
Thank you for this good tutorial but I have one question.
I'm a newbie here, here is my dilemma: I've flashed CM android 5.1.1 successfully from stock 4.2. (Thanks for this detailed tutorial), but I lost my root privileges, now I can't use my root apps. How do I apply root to this ROM? My device is an ASUS TF300T. I've tried Kingo Root and King Root but no success.
I would really appreciate your help and inputs.
Cheers!
ANDROIDYER said:
I'm a newbie here, here is my dilemma: I've flashed CM android 5.1.1 successfully from stock 4.2. (Thanks for this detailed tutorial), but I lost my root privileges, now I can't use my root apps. How do I apply root to this ROM? My device is an ASUS TF300T. I've tried Kingo Root and King Root but no success.
I would really appreciate your help and inputs.
Cheers!
Click to expand...
Click to collapse
I have not used CM in quite a while but I think you have to enable root in Developer Options. I think it is not enabled by default.
If hat does not work you can go to Chainfire's website and download the flashable SuperSU and just flash it in recovery
Thanks and a couple of notes on TF300T
Thanks so much for the great guide. My 300TF was nearly bricked due to slowness and freeze-ups. I'd stopped using it. The process worked and am now running KatKiss. Couple of problems and their solutions for anyone who may have the 300TF:
-When trying to "Unlock Bootloader" I kept getting to "enter Google password" but when I did so (correctly) it was not accepted. The solution was to do another factory reset and NOT install google services. Didn't ask for password after that.
-Used fastboot command line to install "twrp.blob" but nothing happened and it timed out. I had to take out other usb connect programs first (in my case "easy-tether" and my LG phone connect app.) After that everything went as per your guide.
Thanks again
Geneg
Edit:
[Procedure] http://forum.xda-developers.com/showpost.php?p=64841837&postcount=27
Edit/
I am creating this thread dedicated for me and other beginners "noobs".
Where should I begin as a beginner?
I am looking to unlock and root with latest MM that motorola supplies.
Things you should know about me:
I have no idea how to use adb.
I have no idea how to unlock & root or even if I should but I don't like ads.
I have no idea which firmware to use.
http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
http://forum.xda-developers.com/mot...rom-stock-rooted-debloated-x1575-6-0-t3262242
I am completely lost.
I have not gotten my phone yet, I ordered it this morning and will be here Friday. I am just trying to compile sources and info.
Thanks a bunch guys, I really need help with this.
One piece of advice for starters just since you used the word noob. Never mod your phone on a low battery. You can mess a phone up enough to break offline charging, and without a removable battery that you can swap out or charge in a cradle that could get awkward in a hurry on this phone. I always make sure I'm >75% just in case. You can fastboot your way out of all kinds of trouble; but not if your battery is dead and your phone is so screwed up it is not offline charging.
Your phone will probably show up with Android 5.1.1 installed, at least I got mine about 3 weeks ago and it did. Once it is through initial setup it should want to apply an OTA to Android 6.0 right away; if not check for it in Settings -> About -> System updates and it should find one. Just let it update before you do any setup or app downloading.
Once you're on MM, before you do any setup you have to unlock your bootloader if you intend to root. You'll get all the warnings about voiding warranty and here there be dragons, so be prepared for that. Also, unlocking the bootloader will wipe your internal storage, so don't bother with any setup or app downloading before you do it.
Start with Heisenberg's thread. It is a great guide on how to setup your computer for adb and fastboot as well as all the syntax you need for unlocking the bootloader and installing a custom recovery. Make sure to get the 2.8.7.1 version of TWRP that is patched to work with the MM bootloader.
When you boot to TWRP recovery for the first time it will ask if you want to keep system read only. Keep system read only and make a backup immediately. I usually make one backup of boot, system, and data, and a separate one of just efs; don't worry if you don't understand, you'll figure it out when you get there. TWRP is all touch based and pretty intuitive. This way you have good, untouched system backup to fall back on just in case.
When it comes to rooting MM, don't use the old system install method. Flash a SuperSU from this experimental systemless root thread (I used this instead of the ivcarlos method linked to the Heisenberg thread because it is more automated and easier). I can vouch for the 2.62-20151210170034 version of SuperSU. I've used it to root stock MM on this phone 3 or 4x as I've restored backups and changed kernels. I've heard the 2.64 and above SuperSU versions are not working with this phone on MM, and the older traditional system root methods like the v2.49 version that is linked to the Heisenberg thread are causing bootloops on MM. Don't panic on first boot after the systemless root; it appears to bootloop once but comes up normally the second time.
One other thing, TWRP doesn't seem to be able to detect the systemless rooting method, and it really wants your phone to be rooted. If/when TWRP offers to automatically install SuperSU, don't let it - ever - it will keep asking. It must use the old method that causes bootloops on MM, not the new systemless method linked above.
Once you're all rooted and settled in, if you get sick of the unlocked bootloader warning you can fix it by reading up in this thread. Just be sure to read carefully and get the MM logo and not the LP logo.
Wow, thank you so much for the long type up.
Duly noted and this is a great start. May I continue here if I run into any problems?
I think ima have fun with this phone
I am into tinkering with devices, "sometimes linux" etc, like my PC OS win7x64 is modified big time, so I probably will catch on with unlocking rooting etc very quickly.
I got chillz and cannot wait!
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
gokart2 said:
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
Click to expand...
Click to collapse
Will do. I was reading, flashing can screw up the modem,wif and what ever else.
I hope I don't screw it up.
Hitti2 said:
Will do. I was reading, flashing can screw up the modem,wif and what ever else.
I hope I don't screw it up.
Click to expand...
Click to collapse
Good luck :good:
I just noticed one thing that might not be entirely clear in the Heisenberg thread. It says to enable adb in the Settings -> Developer Options menu, but by default you won't have a Developer Options menu.
To get one, go into Settings -> About Phone, scroll all the way to the bottom, and tap on build number about 8 or 10 times. Your phone will say something to the effect of congratulations now you're a developer, and you'll have the menu.
Edit: i just noticed it says how to enable developer options further down the page
ty, I will need it lol.
Dev options were on my S5 too. My pops showed me how to on the S5, kinda hoping it was the same way to enable them, turned out to be. Cool.
gokart2 said:
Read a lot. Do a lot of reading on the topic before trying it. Basically learn all the possible errors or negative outcomes before they happen, so your not blindsided and are ready for anything that can happen.
Click to expand...
Click to collapse
^^^This^^^
and remember what XDA is really for ...http://forum.xda-developers.com/showpost.php?p=2031989
with that, enjoy all the reading, and do not be afraid to look at other sites too, there are even videos around that can help guide you...
and there are fellow members here to help...but most questions have already been asked and answered, so search first! Cheers! :highfive:
This might sound so stupid.
So, I will begin with the recommendation of installing twrp as my first step.
http://forum.xda-developers.com/showpost.php?p=64545146&postcount=131
1) Be sure to get the newest TWRP that has been patched for M.
Click to expand...
Click to collapse
How do I go on installing this TWRP? Does it include flashing TWRP to the phone? Or is an app? I don't understand.
How many ROMs can be flashed to the phone, 2? TWRP & Marshmallow?
Hitti2 said:
This might sound so stupid.
So, I will begin with the recommendation of installing twrp as my first step.
http://forum.xda-developers.com/showpost.php?p=64545146&postcount=131
How do I go on installing this TWRP? Does it include flashing TWRP to the phone? Or is an app? I don't understand.
How many ROMs can be flashed to the phone, 2? TWRP & Marshmallow?
Click to expand...
Click to collapse
Sounds like you need to do more studying and reading
TWRP is not a ROM, it is a custom recovery image, which allows you to flash ROMs.
Start here..http://androiding.how/root-moto-x-pure/
Then go here..http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206883 for a good tool. (May have already been linked above...)
[Q] Where should I begin as a beginner?
At the beginning, of course.
Sorry couldn't resist...
Naddict said:
Sounds like you need to do more studying and reading
TWRP is not a ROM, it is a custom recovery image, which allows you to flash ROMs.
Start here..http://androiding.how/root-moto-x-pure/
Then go here..http://forum.xda-developers.com/mot...l-windroid-universal-android-toolkit-t3206883 for a good tool. (May have already been linked above...)
Click to expand...
Click to collapse
Tyvm.
Before I proceed, I need to backup, right? How do I go forth doing a backup?
Also, I am updated on MM, does those two links above work on MM?
Hitti2 said:
Tyvm.
Before I proceed, I need to backup, right? How do I go forth doing a backup?
Also, I am updated on MM, does those two links above work on MM?
Click to expand...
Click to collapse
after you unlock and install custom recovery, you use TWRP (the custom recovery) to create the backup...
as you are on MM, you cannot use the "all in one" application that I provided in the link...so you will have to manually install/flash your rom
Wow im so frustrated. I think i give up. There is no guides upto date to do exactly twrp, backup, install w/e n root for ota mm.
I'll donate 30 usd via paypal if someone can.
Hitti2 said:
Wow im so frustrated. I think i give up. There is no guides upto date to do exactly twrp, backup, install w/e n root for ota mm.
I'll donate 30 usd via paypal if someone can.
Click to expand...
Click to collapse
Clearly you are impatient (not trying to be rude here), - XDA truly is not a place to pay for someone to do it for you, XDA is about learning and development, there are several places that a search will get you what you need. Many members have also posted links above to vast amount of information (specifically this post and this entire thread here http://forum.xda-developers.com/showpost.php?p=64183396&postcount=151 and here too http://forum.xda-developers.com/showpost.php?p=64311581&postcount=171) that you should take time to read and then, as you move through these things then you ask questions.
Offering to pay to have someone do it for you is really not what this site is about.
Read, do google searches...it has been done a hundred time already mate, take the time to learn what it is you are doing before actually doing it.
I dont have 400 to spare for for another phone if i brick this one because i was pointed to all kinds of mixed links. Ionno ill wait till someone comes up with a guide then.
Thanks.
Edit:
Let it be known as well, because you know how to milk a cow doesn't mean I know how to milk a cow. Or change a complete motor out of a vehicle etc.
Not being a smartarsh either. I'll prob end up like this guy https://www.reddit.com/r/MotoX/comments/3z2e6g/stuck_rooting_moto_x_pure_on_60/
And I read this, http://forums.androidcentral.com/moto-x-pure-edition/622331-6-0-marshmallow-root.html#post4899736
Dunno which one to go for.
I'm done for today, I'll come back tomorrow to upset with this.
Hitti2 said:
I dont have 400 to spare for for another phone if i brick this one because i was pointed to all kinds of mixed links. Ionno ill wait till someone comes up with a guide then.
Thanks.
Edit:
Let it be known as well, because you know how to milk a cow doesn't mean I know how to milk a cow. Or change a complete motor out of a vehicle etc.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2031989
Hitti2 said:
Not being a smartarsh either. I'll prob end up like this guy https://www.reddit.com/r/MotoX/comments/3z2e6g/stuck_rooting_moto_x_pure_on_60/
And I read this, http://forums.androidcentral.com/moto-x-pure-edition/622331-6-0-marshmallow-root.html#post4899736
Dunno which one to go for.
I'm done for today, I'll come back tomorrow to upset with this.
Click to expand...
Click to collapse
Looks to me like several folks in there offered suggestions on how to successfully get root ...and again, as my last helpful post here...you really need to read Heisenberg's thread, that guide works, and from what I can tell, you have to use systemless root.
Ok, I will follow
Intro
This thread will serve as a location for basic how-to guides for the Moto X Pure. I'm going to start off with a couple of the more obvious ones and go from there. If anyone has any suggestions for additions please feel free to let me know.
Prerequisites:
You'll need a working adb/fastboot environment on your PC to get through some of these guides. Go here to download the Android SDK, which will give you most updated version of adb and fastboot. Scroll to the bottom of the page and find Other Download Options>SDK Tools Only, and grab the right version for your OS. While it's downloading create a folder in C:\ called SDK (C:\SDK). Once you've downloaded the zip you can extract it into your C:\SDK folder. Navigate to C:\SDK\android-sdk-windows and open SDK Manager.exe. In SDK Manager you need to install the following packages:
Tools> Android SDK Tools, Android SDK Platform-tools
Extras> Android Support Library
Once you have installed those, inside C:\SDK you should see some new folders, one of them will be called platform-tools, within that folder you should see fastboot.exe and adb.exe. I'll refer to this as your fastboot folder/directory or working folder/directory during this guide. To make sure adb is correctly installed, open a command prompt from within your fastboot folder (hold shift + right click, select open command prompt here) and issue this command:
Code:
adb version
If it returns a version number for Android Debug Bridge then you're good to go.
You'll find Motorla drivers here, download it and install, then reboot your PC.
You can test adb by connecting your device to your PC while booted into Android (making sure that adb/usb debugging is enabled in Settings>Developer Options) with the screen unlocked and issuing this command:
Code:
adb devices
It should return your device serial number, if so, adb is working.
You can test fastboot by connecting your device to your PC while booted into fastboot mode (power + volume down) and issuing this command:
Code:
fastboot devices
It should return your device serial number, if so, fastboot is working.
By attempting any of the processes listed this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches on fire, or turns into a hipster and claims to have been modified before it was cool.
Index
How To Unlock Your Bootloader
How To Install A Custom Recovery On Your Device
How To Make A Nandroid Backup With TWRP Recovery
How To Root Your Stock Rom
How To Install A ROM with TWRP Recovery
How To Install A Custom Kernel With TWRP Recovery
How To Make Sure You Can Pretty Much Always Recover From An Accidentally Wiped System
1. How To Unlock Your Bootloader
Go into About Phone in Settings, click on Build Number 7 or 8 times until it says you have enabled Developer Options. Go back to Settings and enter the newly opened Developer Options section, scroll and click on the Enable OEM Unlock option.
Power off your phone then boot into fastboot mode (power + volume down).
Connect your phone to your PC via usb cable.
Open a command prompt from within your fastboot folder (navigate to where you have fastboot.exe located on your PC, shift + right click anywhere within that folder, select open command prompt here).
Check your fastboot connection by issuing this command:
Code:
fastboot devices
It should return your device serial number, if not you need to make sure your drivers are installed correctly.
Once you've confirmed your fastboot connection issue this command:
Code:
fastboot oem get_unlock_data
It should return something like this:
Code:
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
Copy that code (with no spaces between the characters) and paste it somewhere for safekeeping, you'll use it in a minute.
Go to the Motorola bootloader unlocking page. You'll need to create an account with Motorola if you don't already have one. Once you're signed in you can scroll down to step 6 and paste the above code into the text field and hit the “can my device be unlocked” button.
Read the terms and conditions and accept them if you agree (you can't continue unless you accept).
Click the “request unlock key” button and an email with your unlock token will be sent to the email account that you signed up with.
Once you have retrieved the token from the email you can use it within the following command to unlock your bootloader:
Code:
fastboot oem unlock xxxxxxxxxx
(Replace the xxxxxxxx with your unique unlock token)
Your bootloader is now unlocked!
Reboot with this command:
Code:
fastboot reboot
It's now safe to disconnect your usb cable.
Please note: this will erase all user data from your device, it is best to do this before you really start using the device and installing apps or putting data on the internal storage
2. How To Install A Custom Recovery On Your Device
Prerequisites: unlocked bootloader.
Download the recovery of your choice, here's TWRP.
Make sure you check the md5 to verify its integrity (where possible).
Place the file in your fastboot folder (this is where fastboot.exe is located on your PC).
Put the phone in fastboot mode and connect it to your PC via usb cable.
Open a command prompt from within your fastboot folder (shift + right click, select open command prompt here), and enter the following commands:
Code:
fastboot flash recovery <filename>.img
(Replace <filename> with the actual filename of the recovery, the recovery filename in the command will change depending on which recovery you're flashing)
Wait for the recovery to flash, it'll only take a few seconds, you'll get a finished message in your command prompt window once it's done.
It's now safe to disconnect your usb cable.
Don't reboot the phone normally, use the volume buttons to highlight recovery and press the power button to select it. This will stop the stock OS from patching it with the stock recovery in boot. Once you've booted into TWRP like this once, you can reboot normally.
3. How To Make A Nandroid Backup With TWRP Recovery
Prerequisites: unlocked bootloader, TWRP recovery.
A nandroid backup is a very important thing to have before installing any custom software on your device. It's basically a backup of your stock system that you can fall back on if anything goes wrong or if you just want your stock ROM back. You can also use the backup tool to create a backup of your favourite ROM set up exactly the way you like it. The backup you create can be easily restored using the restore tool in TWRP recovery.
All you need to do is enter TWRP recovery, select the backup option from the TWRP home screen, check the system/data/boot boxes, and swipe to backup. The process will take a few minutes.
Click to expand...
Click to collapse
& I will follow
Hello guys!
I make my own ROOT (systemless, thanks for Chainfire) images for Moto X Style with Marshmallow (build MPH24.49-18). Its use "experimental" systemless SuperSU version 2.56 - more info on http://forum.xda-developers.com/show...35&postcount=2. No need replace bootloader or recovery. Still need unlocked booloader.
Because TWRP didn't work in this version of bootloader (0xA048), I cooked "su.img" in a Linux box and used "/data/local/tmp" as bridge (accessible by ADB).
WARNING! I am not responsible for any harm on your phone. When you're not sure if you can do it, leave it!
For use, you need
1) unlocked bootloader.
2) if your bootloader not unlocked, make sure you have copy of your data, because this process will erase your device.
3) install ADB and FASTBOOT on your pc using minimal ADB or Android SDK.
4) install ADB drivers from Motorola or Universal ADB.
5) download provided files.
6) download SuperSU ver. 2.56 from http://forum.xda-developers.com/apps...ellow-t3219344.
Steps:
1) extract files in a folder of your choice (su.img, boot.img).
2) extract Superuser.apk from SuperSU-v2.56-20151030013730.zip from common folder.
3) enable USB debugging on Android.
4) connect your device on pc.
5) open a command prompt in a new folder.
6) type "adb push su.img /data/local/tmp" without quotes.
7) type "adb install Superuser.apk" without quotes.
8) now reboot your device into fastboot mode by typing "adb reboot bootloader".
9) type "fastboot flash boot boot.img" without quotes.
10) type "fastboot reboot" without quotes.
And enjoy!
Now you have a rooted MotoX Style Marshmallow. To apply any OTAs, you only need reflash stock boot.
Click to expand...
Click to collapse
I still think its going to brick but uhwell.
So far so good, I've got it unlocked.
I apologize for my ignorance. I am gonna take it a step at a time.
Doing step one "unlocking" was scary but it went good.
Wish me luck!
Credit goes to @Vincent_vann for offering original and patched boot image
Prerequisite:
You should have ADB installed
LG unified driver 4.2.0 or later installed
USB cable and battery should be at least 60%
Bootloader unlocked
Code:
fastboot oem unlock
Data should be backed up
USB debug should be enabled and your host computer is allowed
Patched boot image downloaded https://mega.nz/#F!zLIkzbwY!-sPXZvcv30t6oxyuOqdFfg
Steps
1. Plug your tablet to your host computer.
2. Open your command prompt and locate your ADB folder and enter the following
Code:
adb devices
You should see your device
3. Go to bootloader
Code:
adb reboot bootloader
If you have not unlocked bootloader, do it now
Warning: your data on the tablet will be wiped!!!
Code:
fastboot oem unlock
4. Flash your boot image. Locate the folder where the patched_boot.img is
Code:
fastboot flash boot
make sure you have pressed a space. Drag and drop the patched boot into the command prompt and press Enter. It should say OK
5. Restart
Code:
fastboot reboot
6. Make initial setup, enable developer option again and USB debug, and enable unknown source in Security Settings
7. Download and install Magisk Manager, and upgrade when necessary.
8. Your tablet is rooted.
How much can we expect to speed this tablet up with just root?
@mingkee, thanks for the tutorial. Finally got around to doing it. All good.
For Magisk, do we use it as a basic root or can modules be used. Haven't done anything on it yet (powered off and charging).
ZTE Axon 7 A2017U, AospExtended v5.4 ROM, HellsGate Kernel, Multiboot, Tapatalk 4.9.3
marcdw said:
@mingkee, thanks for the tutorial. Finally got around to doing it. All good.
For Magisk, do we use it as a basic root or can modules be used. Haven't done anything on it yet (powered off and charging).
ZTE Axon 7 A2017U, AospExtended v5.4 ROM, HellsGate Kernel, Multiboot, Tapatalk 4.9.3
Click to expand...
Click to collapse
I have not added other module.
I root this table so I can install CF.Lumen to fix that muddy tint.
Ahh thanks for this!! I haven't had root in any device for awhile. hoping for twrp soon. Let me know if I can assist in any way!
These instructions are not fully understandable please advise after step 4. Flash your boot image. Locate the folder where the patched_boot.img is
Code: fastboot flash boot this is very very vague please give more information on how this is setup some people have ADB and ANDROID installers installed. You need to fix the steps please.
Ice
ice5192 said:
These instructions are not fully understandable please advise after step 4. Flash your boot image. Locate the folder where the patched_boot.img is
Code: fastboot flash boot this is very very vague please give more information on how this is setup some people have ADB and ANDROID installers installed. You need to fix the steps please.
Ice
Click to expand...
Click to collapse
Yeah, that does sound kind of odd.
What it means is type in (no quotes) "fastboot flash boot " ( note the space after) and then you are to drag the patched_boot.img file into the cmd window to complete the line.
Not necessary if the file is in the same directory as fastboot. So full line is
"fastboot flash boot patched_boot.img"
I too had to reread that line of instruction a couple of times.
LG G3 D851, CyanogenMod CM12.1 ROM, Fechda R7 Kernel, MultiROM, Tapatalk 4.9.5
Is anyone using TWRP? What version?
I've tried it and not getting anywhere.
adb devices - shows the tablet
fastboot devices - shows nothing connected
fastboot oem unlock - <shows waiting on any devices>
anyone else run into this?
beymapwrd said:
I've tried it and not getting anywhere.
adb devices - shows the tablet
fastboot devices - shows nothing connected
fastboot oem unlock - <shows waiting on any devices>
anyone else run into this?
Click to expand...
Click to collapse
Did you install the LG driver's? Happened to me because I forget to install the LG unified drivers. Link in OP
Sent from my [device_name] using XDA-Developers Legacy app
Some one created Twrp for our tablets, but I can't figure out why when I try to reboot into it , it goes to the fastboot screen...anybody??
Drivers installed, had to run first:
adb kill-server
adb start-server
then the rest of the commands..
coolchris305 said:
Some one created Twrp for our tablets, but I can't figure out why when I try to reboot into it , it goes to the fastboot screen...anybody??
Click to expand...
Click to collapse
where did you get the twrp from i cant find it anywhere i see other models but not lg v530
itzmehotsauce said:
where did you get the twrp from i cant find it anywhere i see other models but not lg v530
Click to expand...
Click to collapse
Download twrp builder...but even then i still can't boot into it...
coolchris305 said:
Download twrp builder...but even then i still can't boot into it...
Click to expand...
Click to collapse
well i got it rooted withthe method from this thread but when i go into rootchecker it says its not rooted im guessing its because i dont have su installed but i cant install the su without twrp if im not mistaken so im a bit confused its been a while since i rooted anything
itzmehotsauce said:
well i got it rooted withthe method from this thread but when i go into rootchecker it says its not rooted im guessing its because i dont have su installed but i cant install the su without twrp if im not mistaken so im a bit confused its been a while since i rooted anything
Click to expand...
Click to collapse
Yeah. Rootchecker confirms I have root on mines
I've run into the same issue. The image seemed to have been flashed, but whenever I try to boot into recovery it just goes to fastboot (bootloader).
Canadian Variant
Anyone know if there's any general rule to modifying stuff to work with other models? Other than build.prop edits to v533 instead of v530 I'm at a loss, and I'm guessing the boot image is specific to T-Mobile variants..
There's gotta be a way to work off this framework, but again I've got no idea, and it may be way beyond my skill level
So I've had this tablet since March but really haven't used it much. My question is once I root it using your written guide do you recommend a app to use for getting Free Hotspot Tether on it? I am a 11 year tenure TMO Customer & have a legacy grandfathered rate/data plan.
Even tho my data plan says I have unlimited hotspot tether it is blocked by TMO. I have reached out to T-Mobile on Twitter & even the executive resolutions team of the president office but they just said that at one point it was allowed but that TMO took it away for whatever reason.
So rather than fighting tthem further or getting the FCC or FTC involved for false advertising I figured I'll just use an app once rooted to bypass root. Just wondering if anyone knows what is the best app to use to achieve this once rooted. Thank you very much & have a wonderful day!! ?
All the best,
Ron.
---------- Post added at 04:13 PM ---------- Previous post was at 04:09 PM ----------
mingkee said:
Credit goes to @Vincent_vann for offering original and patched boot image
Prerequisite:
You should have ADB installed
LG unified driver 4.2.0 or later installed
USB cable and battery should be at least 60%
Bootloader unlocked
Code:
fastboot oem unlock
Data should be backed up
USB debug should be enabled and your host computer is allowed
Patched boot image downloaded https://mega.nz/#F!zLIkzbwY!-sPXZvcv30t6oxyuOqdFfg
Steps
1. Plug your tablet to your host computer.
2. Open your command prompt and locate your ADB folder and enter the following
Code:
adb devices
You should see your device
3. Go to bootloader
Code:
adb reboot bootloader
If you have not unlocked bootloader, do it now
Warning: your data on the tablet will be wiped!!!
Code:
fastboot oem unlock
4. Flash your boot image. Locate the folder where the patched_boot.img is
Code:
fastboot flash boot
make sure you have pressed a space. Drag and drop the patched boot into the command prompt and press Enter. It should say OK
5. Restart
Code:
fastboot reboot
6. Make initial setup, enable developer option again and USB debug, and enable unknown source in Security Settings
7. Download and install Magisk Manager, and upgrade when necessary.
8. Your tablet is rooted.
Click to expand...
Click to collapse
Hello would you happen to know of a app to use with this to get Free Hotspot Tether for TMO once I Root it. Hotspot is currently blocked on my legacy grandfathered data plan even tho my plan shows I have unlimited hotspot tether.
So rather than fighting T-mobile regarding this I figure I'll just root & use an app to get my free hotspot tether back. Thank you very much & have a wonderful day!! ?
@QkTreasures, I use WiFi Tether Router. Had it a few years. It works for the most part. Sometimes I can go hours tethering without using my hotspot data but there's been a time or two where it didn't hide the tethering.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy