Hey everybody im new to this forum and so this is my first post! Im from the netherlands and im 15 so my english isnt that great.
I have installed the NAND Jelly Bean Rom on my HTC HD2, everything is working fine except for the 3G data connection.. so I cant whatsapp or check my emails when im not at home if you can help me please!
Greetings Tim
ProLapioZ said:
Hey everybody im new to this forum and so this is my first post! Im from the netherlands and im 15 so my english isnt that great.
I have installed the NAND Jelly Bean Rom on my HTC HD2, everything is working fine except for the 3G data connection.. so I cant whatsapp or check my emails when im not at home if you can help me please!
Greetings Tim
Click to expand...
Click to collapse
Which NAND JB ROM? What radio version do you have? Are the APN settings correct? What bootloader are you using? Did you select MAGLDR or PPP during the installation? You need to give a lot more information before we can give useful advice.
The NAND rom is NexusHD2-ICS-CM9-HWA v2.8
Idk about the radio version but I guess its 2.08?
Boatloader CWM
At the setup I picked MAGLDR not PPP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my NexusHD2 using xda app-developers app
Your radio version is 2.15, which is fine. Have you checked that the APN settings are correct? Go to settings>mobile network>APN Settings (or something like that, you should be able to find it) and check that the right one is selected. If you need to add a new one, you can usually find the correct settings on your carrier's website or by asking them.
Its pretty empty..
How did you see my radio version? And what is that?
Sent from my NexusHD2 using xda app-developers app
I've changed the language to English for you .
What do I have to do here.. :banghead:
Sent from my NexusHD2 using xda app-developers app
Thank you so much it worked I searched for the APN settings filled them in and rebooted my device now my internet works but I believe its not 3G
Sent from my NexusHD2 using xda app-developers app
What does it say in the status bar when you try to use the internet? If H then it's basically 3.5G, if G or E then you're getting slower than 3G connection. If it's one of those, check that your network setting (not sure where exactly it is but it's in the same place as the APN setting) is 'WCDMA/GPRS (WCDMA preferred)' (I may have got the letters slightly wrong but you'll easily figure it out when you see it).
EDIT: Oh and as for seeing the radio version, it's the end of the top line in your screenshot -'15.42.50.11U_2.15.50.14'
Oh that's how you see it.. uhm Now that my internet is working I don't see any difference than before its just the blue connection bar that you're used to on JB. But sometimes a capital R pops up but I guess that's because of the roaming.. everything is fixed now so thanks alot for your help.. I only do not understand why I need to configure that APN mannualy
Greetings Tim :thumbup:
Sent from my NexusHD2 using xda app-developers app
Normally you don't need to do any manual APN configuration, so it seems a bit odd to me too. At least you got it working though.
Nigeldg said:
Normally you don't need to do any manual APN configuration, so it seems a bit odd to me too. At least you got it working though.
Click to expand...
Click to collapse
Hi, I have the same problem, no 3G Internet, wifi works fine.
I have tried allmost everything I could find about this in this forum, but nothing seems to help.. I hope someone has the knowledge and skill to help me, I am not a developper, but not afraid to push some buttons and try things out. Ok first my configuration:
HTC HD2, with latest official generic HTC ROM downloaded and flashed last weekend from the official HTC website:
http://www.htc.com/nl/support/news.aspx?p_id=297&p_name=htc-hd2
I have installed Dual Boot windows mobile with NativeSD Android, using a 16Gb class 10 SD card, using this instruction:
http://forum.xda-developers.com/showthread.php?t=1986437
I have installed the Android NativeSD ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=1437463
I use Rundroid as dual boot app (windows mobile app):
http://forum.xda-developers.com/showthread.php?t=973921
I have set the APN correct according my providers instructions Vodafone Netherlands, like this HTC One X instruction:
http://handleidingen.vodafone.nl/we...internet/de-telefoon-voor-internet-instellen/
I have checked other phones instructions, but they are all the same settings, which is logical of course.
None the less everything is set correctly now, | cannot get 3G internet, when I use windows mobile 3G internet works fine. Data connection is checked ON Roaming is checked ON. Rebooted several times also does not help.
Cell phone and SMS works OK.
I have now even turned off all mobile networking settings in windows mobile (airplane mode), before booting to Androd as windows might run in the background occupying the radio or something (I dont think so, but you never know exactly what is going on)
This all is really frustrating, because the very reason I went over to Android is because mobile internet is more and more crippled with Windows Mobile, because mobile websites I used, are more and more abandoned or not updated anymore because they are replaced by Android, Iphone and windows Phone 7/8 Apps, that obviously do not work on windows Mobile 6.5. Also social media is crippled, as Facebook and Twitter changed server adresses and such, so the old apps fail to find a connection..
At the other hand I do not want to remove Windows Mobile completely, and make it a full android only, because I have some critical applications that only run on Windows Mobile that I certainly do not want to loose (Glider tactical navigation software LK8000, http://lk8000.it/ take a look and you will understand why)
So please help me getting 3G internet back, so I can use it to the fullest again, Big thanks in advance,
Marco Nierop
Netherlands
What Android nativeSD rom are you using?
Some possibly have a problem with rmnet try installing and selecting ppp instead.
Sent from my NexusHD2 using xda premium
shanman-2 said:
What Android nativeSD rom are you using?
Some possibly have a problem with rmnet try installing and selecting ppp instead.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Oh wtf, forgot to mention the most important thing! excuse me!..
I used the ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=1437463
NexusHD2-ICS-4.0.4-CM9-HWA V2.9a
By reading about this, I learned that RMNET only works with MAGDLR which I cant use, because I wanted dual boot, so I already installed using PPP, but for all sake I will try again.
I have received a 32GB class 10 SD card today, which I am formatting right now and will set up for installing a jellybean rom, maybe it works better with that rom, I will take special care to check PPP or RMNET. I will let you know if it works,
Thanks so far!
Marco
Lotsofjazz said:
Oh wtf, forgot to mention the most important thing! excuse me!..
I used the ROM from this thread:
http://forum.xda-developers.com/showthread.php?t=1437463
NexusHD2-ICS-4.0.4-CM9-HWA V2.9a
By reading about this, I learned that RMNET only works with MAGDLR which I cant use, because I wanted dual boot, so I already installed using PPP, but for all sake I will try again.
I have received a 32GB class 10 SD card today, which I am formatting right now and will set up for installing a jellybean rom, maybe it works better with that rom, I will take special care to check PPP or RMNET. I will let you know if it works,
Thanks so far!
Marco
Click to expand...
Click to collapse
No problems with that rom afaik, rmnet is supposed to work better with magldr!
Anyway it's worth trying the one you haven't as both work with magldr.
shanman-2 said:
No problems with that rom afaik, rmnet is supposed to work better with magldr!
Anyway it's worth trying the one you haven't as both work with magldr.
Click to expand...
Click to collapse
I have tried this ROM: NexusHD2-JellyBean-CM10.1 V2.0 [NativeSD]
http://forum.xda-developers.com/showthread.php?t=2224469
I must say it looks much better then the ICS Rom, but the issue of no 3G internet is still there.. So I think it is the MAGDLR requirement after all as stated in the ROM thread.
But I cannot use MAGDLR, because flashing MAGDLR tool, removes Windows Mobile, which I do not want to loose.
Any advise on a nice working Native SD ROM that does work OK when installed according the dual boot guide, using the 4EXT Recovery tool and NOT requiring MAGDLR?
I will search myself also of course but any advise is much appreciated.
Thanks again!
Marco
You can have windows mobile with magldr!
Sent from my NexusHD2 using xda premium
shanman-2 said:
You can have windows mobile with magldr!
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Ok, that is good news!... but how then, because when I flash MAGDLR and reboot, I get the Magdlr tool and windows mobile is gone.
Yes and then reinstall a custom win mobile ROM. Its a long time since I did it! Pure android for me
Sent from my NexusHD2 using xda premium
shanman-2 said:
Yes and then reinstall a custom win mobile ROM. Its a long time since I did it! Pure android for me
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Ok, thanks! I am now trying another ROM, made by Xylograph, ( [13-NOV-2012][ROM][JB][4.1.2] PACman HD2 v1.2a [PA/AOKP/CM10][NativeSD][WIP]) still busy flashing, if that doesn't work I will try magdlr again coming weekend.
Lotsofjazz said:
Ok, thanks! I am now trying another ROM, made by Xylograph, ( [13-NOV-2012][ROM][JB][4.1.2] PACman HD2 v1.2a [PA/AOKP/CM10][NativeSD][WIP]) still busy flashing, if that doesn't work I will try magdlr again coming weekend.
Click to expand...
Click to collapse
It is working!
I have reflashed the Jelly Bean Packman ROM, just with the 4EXT recovery tool but the only thing I changed during the ROM installation is selecting the ODEX option. Another thing that might be important is that I have changed location to do this. I am now at my work where cell phone signal is a bit stronger, and now the 3G Internet seems to work (signal indicator is blue with very small 'H' beside it).
Probably it was OK after all, but is the signal at home just a bit too weak to make it work from the start.. however internet was working OK with Wimo 6.5. so why not with Android? maybe it just needs a good signal, during first boot, to make it work?
Also I did not have to go into mobile network APN settings, the blue H signal popped up right from the start
OK, I am happy now, the Packman ROM works fine, is smooth and looks good.. and still able to boot windows mobile (as a PDA) for my gliding activities! Ha!, what a wonderfull machine this is.. 4 years old and still very, very usefull!
Thanks anyways for the great help and directions.
Related
I have the HTC HD2 TMobile USA.
I used this tutorial
www . youtube . com /watch?v=GK3AlYnGUwU
(remove spaces)
I downloaded the attachment for FroyoStone V2 Android Rom.
I unzipped it and moved it to my SD card.
I did as described and i am in android just fine everything is working for me except my mobile web.
I can use wi fi just fine but when im in the edge network i cannot connect.
There is not any 3g in my area so i cant tell if that is working.
I read around and deduced that i needed to change my internet to and android plan. I have done so and still no luck.
I am still on stock settings.
My Radio is 2.10.50.26
I can provide any additional info needed.
Yes i am new and please dont bash my skull cause im new.
Updates:
dashrink said:
Or u need to enter correct apn settings.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Mine is epc.tmobile.com.
download one of m-deejay's builds, should solve the problem. It's a connection issue that's being worked through, I had it, now I don't. If you want to learn more search under PPP, RMNET.
Or u need to enter correct apn settings.
Sent from my HTC HD2 using XDA App
dashrink said:
Or u need to enter correct apn settings.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Mine is epc.tmobile.com.
thompsd said:
download one of m-deejay's builds, should solve the problem. It's a connection issue that's being worked through, I had it, now I don't. If you want to learn more search under PPP, RMNET.
Click to expand...
Click to collapse
Can you suggest a build sir that fit my specs. Im not to savvy with this yet. I can do the dl and root and run, but when we start talking about Radios and HSPL i get a little lost. So if his builds are as easy as this one then im down.
Mdj's build works well for me...I'm using his new build with s2 kernel.
all tried and fail with data and or wifi connecting not working
I am using the nexusHD2 build and absolutely everything worked out of the box with out any setup.
Format your sd card and install a minimal winmo rom.
i am using MDJ FroYo HD v.4.1 and it works fine for me
Did you set apn? If you just updated kernel did you update the modules?
Sent from my HTC HD2 using XDA App
Using biff 1.3.1 and its perfect
Gotta give us more than "all tried and failed". What WM rom and radio are you using? How did you install the Android builds and what did they do when they failed?
All recent builds should be working almost 100%, you definitely shouldn't be having data/wifi issues at this point
lorenzo23453 said:
all tried and fail with data and or wifi connecting not working
Click to expand...
Click to collapse
1) Post in the Q and A forum.
2) When you post in the right forum, detail your setup
3) Watch the answers roll in.
Have you tried the Topia Series? You can find a link in my sig. T-Mobile works out of the box.
-CMYLXGO
not for me
phantom9000 said:
i am using MDJ FroYo HD v.4.1 and it works fine for me
Click to expand...
Click to collapse
i tried that build and after the first reboot it went crazy force close back to back
BionicSniper said:
I am using the nexusHD2 build and absolutely everything worked out of the box with out any setup.
Format your sd card and install a minimal winmo rom.
Click to expand...
Click to collapse
yea im currently using that build as well but it has some issues when wifi is on switching from edge or H
sullitf said:
Gotta give us more than "all tried and failed". What WM rom and radio are you using? How did you install the Android builds and what did they do when they failed?
All recent builds should be working almost 100%, you definitely shouldn't be having data/wifi issues at this point
Click to expand...
Click to collapse
well im using my tmo hd2 radio 2.15 hspl 3 stock 2.14 rom
for most of the roms i couldnt get a data connection when in wifi mode
other than that the robot voice boots with it and that stop the tryout progress
ive tried lots of the builds, and had all of them working with tmo, data and mms working
Here's mine, check my sig and click on thumbnail for stats.
Hello everybody.
I am new to the board - well, to posting at least. I have been browsing for information for a while and with thanks to threads here, managed to root my hd2 successfully, but a few things are still not working for me properly, so I have a few questions
---
1. I had to ring a company earlier today, which was an automated service and upon them requesting I click a certain number to be redirected to where I wanted, I clicked and it had no impact on the call - they just said they did not recognize a request and continued to repeat the question.
So, does anybody know the setting I need to change to fix this?
---
2. I am in the UK and on my old phone, a blackberry (Don't worry, I have seen the light now!) I could get decent connection, even when not in an WiFi area, therefore using 3G. With the HD2 however, even by changing the radio settings in the *#*#4636#*#* I am never able to get a decent signal outside of a WiFi zone.
I am using the Radio from these forums. The Leo one with the exe being named RUU_CUSTOM. I will try and find it later.
Is the problem with the radio and I need a UK specific one? I have tried GSM (all variations) from the menu stated, which is out local frequency I believe, but with no success.
Or am I missing something else?
---
3. My Android ROM was made for a NEXUS ONE (The gingerbread one), so could this be causing the problems above?
I had to use this one because I could not find another one which would work using CWM.
I tried numerous and after installing, it would not load due to "Kernal Load Error" - so I had to settle on this one.
My partner is American and has an HD2 also, but her's is the American model, and she has no problem installing the mass of the ROM's available around these boards. Could the fact my model is the UK one, make any difference? I would not assume so, but it seems there is a difference somewhere.
Does anyone know the reason for these points?
I thank you all in advance for any help you provide.
-Luke
Radio 2.15.50.14 is the recommended radio for using Android. I'm not too sure about the UK, but I've used my American HD2 on both Tmobile and FarEasTone [ Taiwanese carrier] without any problems, so it *should* work for you too.
The Nexus One build is one of the best Stock Gingerbread ROMs available for the HD2. That shouldn't be the problem. I'm guessing the problem is you might be using the wrong radio. I recommend flashing back to stock WM 6.5 and starting fresh.
Also, there's tons of ROMs available for CWM! However, as you have the UK model, I suggest staying away from a Sense ROM, as they require an ext4 on your sdcard for your model, and that's always been laggy for me. Try MIUI, CM7, or stick with the Nexus build is my suggestion.
Hello EB, and thank you for your reply.
ElectroBeijing said:
Radio 2.15.50.14 is the recommended radio for using Android. I'm not too sure about the UK, but I've used my American HD2 on both Tmobile and FarEasTone [ Taiwanese carrier] without any problems, so it *should* work for you too.
Click to expand...
Click to collapse
That would be the radio I am using. The folder for it is named Radio+Leo+2.15.50.14 on my computer.
ElectroBeijing said:
The Nexus One build is one of the best Stock Gingerbread ROMs available for the HD2. That shouldn't be the problem. I'm guessing the problem is you might be using the wrong radio.
Click to expand...
Click to collapse
I just looked at my phone and the ROM I am using is GRJ90 (NexusHD2-Gingerbread V2.9 NAND), which I agree, works well other than these couple flaws, which are not necessarily related to the rom.
ElectroBeijing said:
I recommend flashing back to stock WM 6.5 and starting fresh.
Also, there's tons of ROMs available for CWM! However, as you have the UK model, I suggest staying away from a Sense ROM, as they require an ext4 on your sdcard for your model, and that's always been laggy for me.
Click to expand...
Click to collapse
Ok, I am new to all of this and it took me multiple hours just to get android to run on this, but I did the NAND install, so I do not have the WM on my phone, even as a dual boot option.
I will perhaps try to find one though, should I not be able to find the answers anywhere else first
ElectroBeijing said:
Try MIUI, CM7, or stick with the Nexus build is my suggestion.
Click to expand...
Click to collapse
I did try the CM7 ROM (TyphooN_CM7_v3.7.0-cLK), but that came up with the kernal issue too. I did try a fair few more, but they all did the same until I come to the nexus, so I stuck with it.
May have to take your advice and start the process over again. *yikes*
Oh, okay, radio shouldn't be the problem then.
Do you have MADGLR or cLK bootloader installed? If you have MADGLR, than that may be the reason why that particular CM7 ROM isn't working, as you tried out the cLK version.
ElectroBeijing said:
Oh, okay, radio shouldn't be the problem then.
Do you have MADGLR or cLK bootloader installed? If you have MADGLR, than that may be the reason why that particular CM7 ROM isn't working, as you tried out the cLK version.
Click to expand...
Click to collapse
Dang it! I did not even notice that, but given I have only rooted one phone, surely I can be forgiven for this slip?
Thanks a bunch. Now I will go try another because you are right, I am using MADGLR.
Thanks again
You may want to look into hd2 toolkit. It makes task29, fashing and installing magldr, clk, and recovery extremly easy. I've had problems with the typhoon cm7 and would not recommend it. Try doing a task 29 and try clk instead of magldr. Clk uses ppp and magldr uses rmnet. Rmnet is haveing trouble but ppp is good. Try a more up to date gingerbread edition for clk and I think that will solve your problems.
The main difference between HD2 UK and American is the amount of internal storage. UK has 512 where Americn has 1024
Sent from my Transformer TF101 using xda premium
camera 720p
Does anyone have a smooth 720p recording on an Android rom?
nathmedlin79 said:
Does anyone have a smooth 720p recording on an Android rom?
Click to expand...
Click to collapse
Some of the Sense 3.0 ROMs have 720p recording. I don't specifically know which ones though.
Just look at a couple threads, the OP should say if 720p recording is supported.
Sent from my Transformer TF101 using xda premium
nathmedlin79 said:
Does anyone have a smooth 720p recording on an Android rom?
Click to expand...
Click to collapse
720p recording is only supported in Windows Phone 7 Roms
Hey guys can someone help me out!Every ICS ROM i tried have Extremely slow data speed.Im currently on Zipnet's ROM.This happen is EVERY ICS ROM!On GB i have normal data speed.Also radio is same in this and GB rom.What should i do?I did nothing wrong when flashing.Watch this video,
http://youtu.be/w81AnKDBn8s
PS
I flashed latest radio and still have the problem.Guys,SpeedTest always giving me "0" downloading speed no!I went back to GB until i get an answer.Here are Screen Shots of Speedtest on ICS and GB(same radio).Tell me what to do please..
PROBLEM SLOVED AFTER FLASHING SENSE ROM!Today i flashed this "SmartBeat Venomous | Sense
4A | Android 4.0.3" ROM and i got normal data speed.But i want AOSP ROM.What should i do?
TIA
crazykas said:
Hey guys can someone help me out!Every ICS ROM i tried have Extremely slow data speed.Im currently on Zipnet's ROM.This happen is EVERY ICS ROM!On GB i have normal data speed.Also radio is same in this and GB rom.What should i do?I did nothing wrong when flashing.Watch this video,
http://youtu.be/w81AnKDBn8s
Click to expand...
Click to collapse
You could try to adjust the apn settings and see if that changes anything for you
Sent from my HTC Glacier using xda premium
It also might be your radio, try flashing different ones and make sure you have good coverage
Sent from my MyTouch 4g using XDA App
I had the same problem, but I set my APN up for simple and also flashed my radio to the latest available and it is working tons better now.
neonshadow said:
I had the same problem, but I set my APN up for simple and also flashed my radio to the latest available and it is working tons better now.
Click to expand...
Click to collapse
Set your APN for simple mean what?I think this could not be an APN issue,because if i have entered wrong APN settings,i will not able to get connect to intenet.I can surf internet,no.Problem is it is extremely slower on every ICS ROM i flashed...Ah.My carrier is Airtel.
I have simple mobile and having same problems.
neonshadow said:
I had the same problem, but I set my APN up for simple and also flashed my radio to the latest available and it is working tons better now.
Click to expand...
Click to collapse
I have also simple mobile and having same problems, can you please, post what you did to fixed, or at least point me on the right direction. thanks
I use this and it has fixed my data speed every time.
1. Download the 3g turbocharger from here: http://forum.xda-developers.com/attachment.php?attachmentid=979490&d=1333415041
2. If you don't have script manager, get it from the play store.
3. Navigate to the 3g turbocharger download.
4. Click it and select run as root (icon is the superuser logo)
5. Run the script and select your speed settings. Reboot twice to ensure the build.prop tweak works.
6. Verify your data speeds with speed test and test each setting to find fastest speed.
Hope this helps you as well.
Sent from my HTC Glacier using XDA
Please can someone help me!I also wanna flash AOSP ICS ROMs....please help me....
Seems this is only from me.Scince this us only happing to me,no one gonna fix that because they have not that problem.I understood.I tried everything i know.I aslo tried by editing build.prop..But nothing changed.I will hang on GB untill SENSE ICS ROMs gonna stable,because SENSE is the slove for this..
So I just installed tytungs cm10 on m ygfs hd2 via nativesd with wm6.5 and mobile data is not working I tried many combinations with data and WiFi tethering,... something that's also strange is that thephone shows the roaming sign at the signal bars? How can I fix this? Thanks guys
Edit: It seems that the "R" on the roaming bars doesnt have a connection with the mobile data not working since switching SIM cards removed the roaming "R" but mobile data still wasn't working.
So I still don't have a working data connection not even a 3G or H icon in the notification bar in Android on native SD in wm 6.5 all is working...
Thing I tried:
3 Roms: Jelly Belly, Nexus hd2 Jelly Bean, myMIUI GingerBread, all without working data connection.
HSPL 2.08 and 3.03
Current info:
Radio: 2.15.50.14
HSPL 3.03
Maybe you installed PPP instead of RMNET?
Check your APN settings as well as the network.
Thanks for the answer! I tried with rmnet and ppp with the same results. Networking and apn settings are alright I also can write SMS and call people without problems. The only thing not working is mobile data and it displays the roaming 'R' on the signal bars...
Sent from my MB860 using xda app-developers app
Maybe I should add that it doesn't even show an H or 3G in the notification bar just nothing...
Sent from my MB860 using xda app-developers app
Since there is an "R", maybe you should check "use data when roaming" .. But why is it showing "R" ? You aren't roaming, are you?
Ok I found out why it didnt work... I tried flashing back to HSPL 3.03 from 2.08 and now it works but I have no idea why... anyways thanks for your help
Kiwimoose said:
Ok I found out why it didnt work... I tried flashing back to HSPL 3.03 from 2.08 and now it works but I have no idea why... anyways thanks for your help
Click to expand...
Click to collapse
Ok it doesnt work XD sorry for the confusion but earlier mobile data also wasnt working on winmobile and flashing back to HSPL 3.03 fixed it for winmobile so I thought it would fix it for android, too but it didnt... The Roms I tried are NexusHD2-Jelly Bean and Jelly Belly both ROMs think Im roaming when I'm not and both can't create a mobile data connection (not even 3G or H signs in notification bar...) in Winmobile 6.5 mobile data works as it should... So if anyone has any idea how to fix this please help me!!!
Did you check the "Data Roaming" ?
Marvlesz said:
Did you check the "Data Roaming" ?
Click to expand...
Click to collapse
Yes I checked data Roaming and even national roaming just to be sure... I just tried it with a different SIM card and now the Roaming "R" vanished but everything else is still the same so maybe the "R" doesnt have any connection to the mobile data at all?... and thank you for your quick reply
So its not a Jelly Bean problem too I tried myMIUI (Gingerbread) and it has the same problem...
Maybe a problem with the radio?
Radio is 2.15.50.14
I believe it is the international hd2.
Kiwimoose said:
So its not a Jelly Bean problem too I tried myMIUI (Gingerbread) and it has the same problem...
Maybe a problem with the radio?
Radio is 2.15.50.14
I believe it is the international hd2.
Click to expand...
Click to collapse
Sorry for triple posting but i just want to keep everyone up to date on my own progress:
I tried the following trick from this thread: http://forum.xda-developers.com/showthread.php?t=766188
1- Dial *#*#4636#*#* you will have a menu of testing
2- open Phone information you will see all network info...
3- press on (set preferred network type..
4- change to GSM AUTO .... and done....
Click to expand...
Click to collapse
After applying these changes I get a "3G" sign in notification bar but still no connection...
I then set the DNS in build.prop to this:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
which sadly didn't work either...so if anyone has any idea please help!!!
Same problem to me. The mobile data still works if I am using win mobile or even SDCard ROM (ICS NexusHD). But using nativesd ROMs, it does not work.
Someone please help us.
I got it working after flashing the Rom over and over again with full wipe ppp and adding the build.prop lines.
Have you added DNS to build.prop:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Yes exactly
I have added too but it does not work. I found that if using sdcard NexusHD, network type is HSDAP:9 (able to connect) but using any NativeSD ROM, network type is HSDAP:8 (unable to connect). Is it the problem? Anyone can help me?
So my girlfriend pulled the sd card out while the phone was running and after turning the phone on again mobile data didn't work again... I tried doing everything the same way as before but it isn't working again... Does anyone actually know what causes this? Since it's working flawlessly on wm6.5 it should be an android specific bug no? This is quite frustrating since I somehow got it to work before and now just because of such a little mistake it's gone XD
Sent from my MB860 using xda app-developers app
Same problem - no data in nativesd android
I too facing same problem.
I have Magdlr with HSPL 2.08 something with radio 2.15. something
I have win 6.5 in nand and android in sdcard using rmnet
Data connection is flawless in win6.5
But there is no data connection E or 3G or H symbol even in any of the androids. I tried NexusHD JB, Slim rom JB, Touchwizmod JB, Pixeldroid JB. Data never works in any android SDCARD installation.
Any fix please. Thanks. I wanna use whatsapp in android from sdcard
thanks
sathya80 said:
I too facing same problem.
I have Magdlr with HSPL 2.08 something with radio 2.15. something
I have win 6.5 in nand and android in sdcard using rmnet
Data connection is flawless in win6.5
But there is no data connection E or 3G or H symbol even in any of the androids. I tried NexusHD JB, Slim rom JB, Touchwizmod JB, Pixeldroid JB. Data never works in any android SDCARD installation.
Any fix please. Thanks. I wanna use whatsapp in android from sdcard
thanks
Click to expand...
Click to collapse
Same problem here... for a year, can't find the solution.
Tried everything what is written about that problem... nothing
Any help would be deeply appreciated.
F.
Flukturr said:
Same problem here... for a year, can't find the solution.
Tried everything what is written about that problem... nothing
Any help would be deeply appreciated.
F.
Click to expand...
Click to collapse
Hey mobile data is working with "Touchwiz mod V3.0 4.2.2 JB" rom. I made a clean install with PPP connection instead of RMNet. But for me battery drain is very bad in Touchwiz mod. so luking for a good rom with better battery life.
cheers