ok guys, so first, i want to apologize for my bad english. im not very good when it comes to writing and talking.
let's go; what we are going to do is flash the ROM with aan included ROOT, with the posibility of wiping our device.
I remind you that: **I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE OR YOUR COMPUTER.**
**I RECOMMEND CHARGING YOUR BATTERY TO 100%**
**I ALSO RECOMMEND YOU TO MAKE A COPY OF ALL YOUR DATA**
YOU WILL MISS YOUR GARANTY IF YOU ROOT YOUR DEVICE**
First step: DOWNLOAD THE ROM Through this link and place it in your desktop.
2. you will also have to download ODIN 3
3.in Developer options, activate the USB Debugging option (Settings --> Developer options --> USB Debugging
Ok, you have to start ODIN and you have to get your device in Downloading Mode. (you will do this by shuting it off. and then pressing *VOLUME DOWN KEY*+*HOME KEY*+*POWER KEY*. when you do that you should press the volume up key) When you are in Downloading mode you should connect your device to your PC.
4. Once synchronized, with Odin, you have to select "OPEN" where it says PDA. select the archive you downloaded before. (the one with the name *I8190XXALK6_I8190XEFALK1_HOME_ROOTED.tar.md5*) (you have to uncompress that item before using it)
5. then you press start in Odin, and wait 'til the instalation finishes. the your device should reboot and odin should show a message saying PASS!
6. then you should be able to boot your device like you do normally.
EXTRA STEPS JUST IF YOU HAVE ANY ERROR
1. if you cant boot, you will need to WIPE your device instaling this archive and use it like in step 4 through the PDA button.
2. if you still have any problem, you should install this following step 4.
how your device should look like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any problem or suggestion, please comment and thank.
This will install an older December rom! I'm afraid it's a step back, and bad advice.
Most countries have moved on from the LL2 rom in that file.
The instructions also mention the LK6 rom, which is even older, and not attached above.
this is avicoh first rooted rom and it was posted here on the forum long ago. I dont know why u reposted, to be honest i wayted for u to post but thought u come up with another solution that doesnt include Odin.
Best regards,
Yeah this isn't anything new, I and everyone here thought there was some kind of new ROOTING method. The Rom is already Rooted.
Sent from my GT-I8190 using xda premium
This has been covered before in the correct forum. Read before posting.
Posted in the wrong topic, my apologies to mod's.
Related
These are the steps explaining you how to flash a custom firmware to the SmartQ Ten3 T15.
Use my How To to create the Custom Firmware.
These steps should apply to any custom firmware for SmartQ Ten3 T15.
Warning : Creating a firmware and changing the files may cause your device to stop working, I won't be held responsible for any damage caused by this.
Flashing your firmware isn't more difficult than rooting the device, if you did that you can do this.
I'll use pictures to illustrate the right options. The recovery is in Chinese so this will make it easier to follow the right procedure.
1. Reboot your device into recovery, by selecting the right option in Android 4.0.3 after long pressing the power button. Or by pressing and keeping the volume down button together with the power button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You use the volume up and down buttons to move the selection up or down. And you press the power button to confirm an option.
2. Select the second option from the menu. (Flash file from SD card)
3.Select the 3rd option from the menu. (Toggle certificate verification)
An extra line will be added to the bottom half of the screen. Most probably confirming the toggle to switch off certification verification.
4. Select the 2nd option from the menu. (Browse sd card for file)
5. Select the file SmartQT15 you put on the root of your microSD card.
Firmware flashing will start and you can follow it's progress in the lower half of the screen:
Once done the last menu will appear again.
6. Select bottom option from the menu. (Back)
7. Select the top option from the menu. (Reboot device)
Firmware flashing is done and your device will reboot. If you have done nothing wrong your device will start-up normally.
If you have any questions feel free to post below and I'll do my best to answer them, all the above is based on my experience and from what I could find out on the Internet.
If you want to know how to make the firmware pre-rooted contact me via PM and I'll do my best explaining it to you.
I went to the download page at http://shipped-roms.com/index.php?category=android&model=Vision and there are a bunch of .exe files there. My computer (Win7) was originally installed in Chinese, I have since changed it to English. BUT the installer detects Chinese somewhere in the system, and displays all of the install menus in Chinese, so I can't read it. What do I have to do to install? Is there a set of screenshots anywhere so I can follow along? Does the .exe just dump installer files on your system, or just write directly to the phone over USB?
I'm returning the phone for warranty repair as there is an area of the screen where the touch doesn't work. Anything else I should do? Do they check to see if a cooked ROM has been installed, or if they see it's stock, just proceed with the warranty? I suspect I'll get an entirely new phone.
Why don't you follow this guide? http://forum.xda-developers.com/showthread.php?t=1442988
bogdan5844 said:
Why don't you follow this guide? http://forum.xda-developers.com/showthread.php?t=1442988
Click to expand...
Click to collapse
Saw it, but the roms from the linked site are not Asian, can't use them.
The exe extracts the rom.zip and the tools to flash it (adb, fastboot) to %temp%, you could go there and flash the rom yourself, or you can just click next on the exe a bunch of times, with your phone plugged in, on fastboot usb mode.
-Nipqer
Why do I need my phone plugged in? I don't want anything to install, I can't tell what it's doing. I just want to extract the files.
You shouldn't need your phone plugged in. Just open the exe,so it extracts to %temp%, then drag it out of the way so you can find the rom.zip
-Nipqer
Nipqer said:
You shouldn't need your phone plugged in. Just open the exe,so it extracts to %temp%, then drag it out of the way so you can find the rom.zip
Click to expand...
Click to collapse
I finally got it to display in English. Here's what the installer screen was saying (that I couldn't understand as it was in Chinese):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to proceed? I'd rather extract the files and flash using clockworkmod than use this weird installer.
well you can't flash an ruu through recovery so use the installer or find a pc10img to flash through hboot. make sure you are to flash the proper stuff or you will have a brick
Sent from my HTC Vision using xda premium
Hello. This is my first post on this forum so please correct me should i post this in the wrong cathegory or use wrong tags etc
I followed the straight-forward guide i find here: http://forum.xda-developers.com/showthread.php?t=1646108
Using the recovery mode on a Samsung S5 i have the option to "Apply update from external storage" and i find the .zip file under this tab and if i try to apply the update i get the following message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been trying this three times but i get the same error. I tried to search if other experienced the same problems but i found no similar threads.
Fyi this is on a non-rooted S5. It belonged to my grandmother which recently passed away and we are stuck trying to retrieve the photos on the device and this seemed like the best way. If there is any other way to retrieve these photos from a S5 with a pattern lock i will gladly accept any suggestions USB Debugging is obviously turned off on this phone -_-
Thank you!
You need root, a custom recovery and a terminal emulator as it seems to do this. Btw i`am sorry for your grandmother. Best is to flash a custom recovery with Odin, flash the latest superSU.zip in recovery . Reboot and install a terminal emulator from Play and follow the guide. Turn on usb debugging too.
gee2012 said:
You need root, a custom recovery and a terminal emulator as it seems to do this. Btw i`am sorry for your grandmother. Best is to flash a custom recovery with Odin, flash the latest superSU.zip in recovery . Reboot and install a terminal emulator from Play and follow the guide. Turn on usb debugging too.
Click to expand...
Click to collapse
Thank you for quick response
I am however very new to the the concept of rooting, and im not sure what all those programs you just mentioned are and how i use them
Could you post me a link to what programs i need, and exactly how i use them?
i tried to flash drivers i get this errer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on android l v12 , my device is note 3g
i tried to flash new offical miui6 via twrp 2.8 i got error
and wiped data,system etc...
so i am not able to enter recovery and even into rom what to do??
Please Help ME
It seems a problem with Windows rather than with your phone.
First of all don't worry, there are very high chances that you will recover the phone in working state. I worked for over a year with MTK devices, they brick very easily but it's also easy to unbrick.
It's a signature error, not a driver error. I remember Windows has somewhere the option to disable signature checking for drivers. Disable it, then after installing this driver you can re-enable it if you want.
I assume you are able to proceed from this step on, once phone is recognized by PC. If I'm wrong, feel free to ask
To Install Driver without Signature error.
This will Help u to install driver without signature.
What to do:
1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, then click the gear icon (Settings).
2.Click More PC Settings.
3. Click General.
4. Under Advanced Startup, click Restart Now.
NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’
5. After restarting, click Troubleshoot.
6. Click Advanced Options.
7. Click Windows Startup Settings.
8. Click Restart.
9. After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
10. After restarting, you will be able to install the drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway.
You are now complete. I hope this will help you. Good Luck..
Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me
any help?
Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse
Can I switch to a different luacher or operating system?