do these pc parst work together? - Hardware Hacking General

do these parts work together
motherboard: http://www.amazon.co.uk/Asus-M5A78L...1_1?s=computers&ie=UTF8&qid=1355242271&sr=1-1
2 graphics cards: http://www.amazon.co.uk/Sapphire-11...V8SI/ref=sr_1_3?ie=UTF8&qid=1355241889&sr=8-3
case: http://www.amazon.co.uk/CiT-Vantage-Gaming-Audio-Reader/dp/B0071KZNUY/ref=pd_sim_computers_1
psu: http://www.amazon.co.uk/Cooler-Mast...AKOM/ref=sr_1_1?ie=UTF8&qid=1355242153&sr=8-1
ram: http://www.amazon.co.uk/Corsair-CMZ...1_2?s=computers&ie=UTF8&qid=1355242548&sr=1-2
cpu: http://www.amazon.co.uk/AMD-Bulldoz...1_1?s=computers&ie=UTF8&qid=1355242232&sr=1-1
hdd: http://www.amazon.co.uk/Seagate-ST3...AGSO/ref=sr_1_3?ie=UTF8&qid=1355242411&sr=8-3
are the specs good enough to run battlefield 3 smoothly on high settings

frederic2707 said:
do these parts work together
motherboard: http://www.amazon.co.uk/Asus-M5A78L...1_1?s=computers&ie=UTF8&qid=1355242271&sr=1-1
2 graphics cards: http://www.amazon.co.uk/Sapphire-11...V8SI/ref=sr_1_3?ie=UTF8&qid=1355241889&sr=8-3
case: http://www.amazon.co.uk/CiT-Vantage-Gaming-Audio-Reader/dp/B0071KZNUY/ref=pd_sim_computers_1
psu: http://www.amazon.co.uk/Cooler-Mast...AKOM/ref=sr_1_1?ie=UTF8&qid=1355242153&sr=8-1
ram: http://www.amazon.co.uk/Corsair-CMZ...1_2?s=computers&ie=UTF8&qid=1355242548&sr=1-2
cpu: http://www.amazon.co.uk/AMD-Bulldoz...1_1?s=computers&ie=UTF8&qid=1355242232&sr=1-1
hdd: http://www.amazon.co.uk/Seagate-ST3...AGSO/ref=sr_1_3?ie=UTF8&qid=1355242411&sr=8-3
are the specs good enough to run battlefield 3 smoothly on high settings
Click to expand...
Click to collapse
Your build is very similar to my current one. The mobo, case, cpu, psu and ram will all be fine. But you will not be able to run two gpus on that system. It only has one pcie x16 slot and can only take one graphics card. You'd be better off getting something like a 6850 or gtx 550/560.

HazzaBlake said:
Your build is very similar to my current one. The mobo, case, cpu, psu and ram will all be fine. But you will not be able to run two gpus on that system. It only has one pcie x16 slot and can only take one graphics card. You'd be better off getting something like a 6850 or gtx 550/560.
Click to expand...
Click to collapse
I would add that, as a general rule, if you don't do any video-editing or high-GPU intensive calculations (gaming is not one), a 2-cards setup is rarely worth it. You usually have a better deal by buying one high-end graphic card than 2-medium.
Of course, if you don't care about money, two 600$ cards will do wonders

Motherboard?¿ really good parts
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

I'm not a huge fan of the case, you'd be better off having the PSU at the bottom of the case, not up top like it looks like. Tom's Hardware has a great article about air cooling set-ups that really helped me plan my set-up.
I'd also go for one better GPU than two, like roninfight said. Look up cards and how they run BF3 at your resolution. BF3 is gpu-dependent from what I remember, so the CPU isn't such a big issue for that particular game, but can be for others like Skyrim. Dual GPU can lead to micro-stuttering and other issues, even with the top-of-the-line cards - so unless you have a compelling reason to need the processing power, it's not really worth bothering with.
If you're looking for a gaming machine, I'd look at Intel processors. Unless things have had a big shake-up in the AMD camp (which I wouldn't really guess since AMD has publicly announced they're going to focus on the mobile market instead of desktop - but maybe they had something in the line). For most of the games I was planning on playing, the testing done put Intel CPUs ahead on pretty much all of them. I don't have hardware loyalty
If you were going with that set-up, I'd question if the PSU was enough - also, I would check out if it has enough connectors for two GPU. I'd have to look at it in-depth, but it seems from a glance that you'd be cutting it close and might only support one card, but I didn't go track down the specs on it.

Are these parts better http://www.amazon.co.uk/registry/wishlist/P4J2K9GHTWJ9

frederic2707 said:
Are these parts better http://www.amazon.co.uk/registry/wishlist/P4J2K9GHTWJ9
Click to expand...
Click to collapse
PSU needs to be at least 500w and i recommend you get a single gpu instead of sli. It really isn't worth the hassle unless your running three screens or 2560x1600 resolution.
Change PSU to corsair as they're much better and I'd suggest nvidia instead as nvidia drivers are still better than amd's at the moment.
I'd also change from the 8 core amd to a quad core intel. I have a 2500k and its brilliant. make sure u get 64 bit os aswell!
Sent from my GT-I9100 using xda app-developers app

your build is all ok and puts well together in every aspect

Yes those are better
Sent from my SGH-T989 using xda premium

IPCPARTPICKER is a great website that checks for compatibility and finds the best prices for your build. It uses many sources: Amazon, Newegg, etc.
Check it out, enter your build there.

Related

Intel or AMD, who would you want more in your phone

With all the talk of Intel breaking into the smartphone market
I ask, between AMD and Intel who would you want in your phone our tablet and why?
My answer its AMD, their apu's I find to be very impressive vs the atom or laptop core I series. Id love to have a Radeon HD 6400 series gpu to play my Android games on =)
Sent from my Nexus S 4G using Tapatalk
Amd the apu is great i hope the put it in tablets an does android support those kinds of cpu's
Sent from my SGH-T959 using XDA App
Jasonhunterx said:
Amd the apu is great i hope the put it in tablets an does android support those kinds of cpu's
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Its going to yes =) and unofficially does already
Sent from my Nexus S 4G using Tapatalk
Hands down amd. Basicly intel makes a hell of a cpu but graphics not so much. Amd is not to far behind intel. But imho they make the best graphic cards and have the best technology in the gpu. So if they decided to make tablet and phones cpu and gpu i think they will have be very good and being that its phone and tablet maybe some of there gpu tech can be used in the cpu since the cpu for phones and tablets work a bit different than a desktop cpu or laptop cpu for that matter. Sorry for the caps im at work i have to use caps all day
AMD is the best, all day, everyday
i'll stick with Samsung CPUs
they are the best right now in the phone market
AllGamer said:
i'll stick with Samsung CPUs
they are the best right now in the phone market
Click to expand...
Click to collapse
I agree, buy if these guys got in the game is the question =)
Sent from my Nexus S 4G using Tapatalk
hotadef said:
Hands down amd. Basicly intel makes a hell of a cpu but graphics not so much. Amd is not to far behind intel. But imho they make the best graphic cards and have the best technology in the gpu. So if they decided to make tablet and phones cpu and gpu i think they will have be very good and being that its phone and tablet maybe some of there gpu tech can be used in the cpu since the cpu for phones and tablets work a bit different than a desktop cpu or laptop cpu for that matter. Sorry for the caps im at work i have to use caps all day
Click to expand...
Click to collapse
I agree there, but with AMD llano and later bulldozer based APU, any processor gap between Intel and AMD will be gone. These two companies entering the mobile arena will make competition skyrocket, and that only means good things for us consumers =) they would push the drive for faster graphics and processors even quicker than it already its moving
Sent from my Nexus S 4G using Tapatalk
Nvidia. Thanks.
Lmao Nvidia sucks google made a mistake using nvidia for honeycomb exynos an omap smokes tegra
Sent from my SGH-T959 using XDA App
Samsung, Nvidia, Intel, then AMD
Remember people you get what you pay for and AMD is CHEAP, and no I'm not impressed with their GPUs either
AMD is not cheap. They have graphics processors at all price points offering more bang for buck than the equivalent Nvidia offering.
Amd is cheap, well slower than intel
also keep in mind that AMD is bringing around their first major Arch revision since 2004, and also keep in mind that for a while AMD smoked intel with Athlon and Athlon XP aswell as with Athlon64, intel didnt regain lead till the core series. AMD GPU on the other hand are consistently offering more for your Dollar than NVIDIA, I have a Radeon HD4870 1gb and can still max out ALL my games short of DX11 specific features (tesselation, etc.) Intel processors since the beginning of the core series have been great, but their GPU leave alot to be desired. Until I can play Borderlands on an intel APU with a better framerate than an AMD APU I'm gonna go with AMD. If you can really name a single desktop application or game where there is a big enough difference between AMD and Intel (desktop as in common user applications) then you will get my kudos. Also your going to want to be looking into AMD and Intels new archs like bulldozer and ivy bridge. Bulldozer will be out in just over a week and we'll see what AMD has up there sleeve with their first major arch change in forever =] (and now that they will have all the instruction sets intel has also =D)
EDIT: and by difference I mean more than 10-15sec or more than 10-15FPS
I'd like to see a Cyrix chip in my next phone please...
intel.
anyone ran an ati/amd gpu on linux? yeah... as bad as or worse than samsung on driver support.
ECOTOX said:
AMD GPU on the other hand are consistently offering more for your Dollar than NVIDIA, I have a Radeon HD4870 1gb and can still max out ALL my games short of DX11 specific features (tesselation, etc.)
Click to expand...
Click to collapse
really? my 5770 couldn't even consistently pull 30fps in css (which is, what, 7 years old now?) on high settings. and when i added a second 5770 in crossfire and play css i'm guaranteed a bsod within a minute (which is funny cause i hadn't seen a bsod for years before getting an ati card).
funeralthirst said:
intel.
anyone ran an ati/amd gpu on linux? yeah... as bad as or worse than samsung on driver support.
Click to expand...
Click to collapse
I do actually =P havent had any problems, and actually had more problems getting my friends Nvidia working in linux =/ My build runs great and I can OC to 3.5ghz on my phenom II 920 2.8ghz(i got one when they first came out =D, and could go higher if i didnt skimp out on the MB and only spend 90$ on one =3)
PS, this isnt a desktop/laptop question, think of TABs / Phones when making an answer =]
ECOTOX said:
I do actually =P havent had any problems, and actually had more problems getting my friends Nvidia working in linux =/ My build runs great and I can OC to 3.5ghz on my phenom II 920 2.8ghz(i got one when they first came out =D, and could go higher if i didnt skimp out on the MB and only spend 90$ on one =3)
PS, this isnt a desktop/laptop question, think of TABs / Phones when making an answer =]
Click to expand...
Click to collapse
consider yourself lucky. i've never, ever had a problem with nvidia in linux. with ati, i tried fedora, opensuse, mandriva, and ubuntu. ubuntu would work in 9.10 but only the stock kernel (from the live cd), any kernel update would kill everything. finally i was able to get 10.10 installed, and 11.04 hasn't given me any problems. but i still can't run any other distro.
and sure, this isn't about desktops or laptops, but android is linux and if their driver support sucks in linux, i expect it to suck in android as well.
Ati/Amd gpu's are the best point blank nothing to it there should be no argument :-/
Sent from my SGH-T959 using XDA App
funeralthirst said:
intel.
anyone ran an ati/amd gpu on linux? yeah... as bad as or worse than samsung on driver support.
really? my 5770 couldn't even consistently pull 30fps in css (which is, what, 7 years old now?) on high settings. and when i added a second 5770 in crossfire and play css i'm guaranteed a bsod within a minute (which is funny cause i hadn't seen a bsod for years before getting an ati card).
Click to expand...
Click to collapse
funeralthirst said:
consider yourself lucky. i've never ever had a problem with nvidia in linux. with ati, i tried fedora, opensuse, mandriva, and ubuntu. ubuntu would work in 9.10 but only the stock kernel (from the live cd), any kernel update would kill everything. finally i was able to get 10.10 installed, and 11.04 hasn't given me any problems. but i still can't run any other distro.
and sure, this isn't about desktops or laptops, but android is linux and if their driver support sucks in linux, i expect it to suck in android as well.
Click to expand...
Click to collapse
yeah but dont you think if they did enter that market they would provide the needed support for the android based devices? I havent had any problems for years with AMD GPUs and linux, and Every driver update I just install and go no matter kernel or distro I have used (I mostly use Ubuntu though). I guess it really is based on experience =P I see it this way though, as of right now you can max out Left4Dead 2 on an AMD APU, you get maybe 13fps on an Intel. The laptop market is where we can best compare, and Idk about you but if I'm getting a Tab or phone I'm not looking for something to crunch data (which we all know intel does better), I want a rich and smooth UI, games that look amazing, and light weight and low power consumption (IMO both companies are doing ALOT better with TDP but still have a ways to go)

Beginner's guide to building a PC: everything you know and don't already know!

When I saw the topic of a beginner's guide to building a PC, I jumped for it because I remember building my first PC. It actually wasn't nearly as long ago as you'd think. I also remember how clueless I was. Obviously, I know about everything that goes inside of a computer, but once I was faced with the task of putting all of that together, I was like a deer in headlights.
Prerequisites​Let's start off with a list of everything that you're going to need:
CPU
Thermal paste
Motherboard
CPU cooler
Case
Power supply
RAM
Storage
GPU (optional unless you have an Intel F-series processor)
An operating system
And then, of course, don't forget about the necessary peripherals:
Monitor
Keyboard
Mouse
Speakers
Webcam
External peripherals are beyond the scope of this post, but take note of what you need, keeping in mind that the PC you're building doesn't have the built-in parts of an all-in-one PC, like a microphone, speakers, and a webcam.
How to get started or: Pick a CPU​First of all, and I cannot stress this enough, PCPartPicker is your friend. The site lets you plug in a list of parts that you're planning on using and it will tell you if there are any compatibility issues. It's super useful. In fact, even if you know that your parts should be good to go, run them through PCPartPicker anyway just to make sure.
The other key thing you need to do when getting started is to pick a CPU. This is an important first step because you're pretty much building out the PC around this choice. There aren't any motherboards that support both Intel and AMD CPUs.
Choosing between AMD and Intel (see, I didn't put the same company first twice in a row so you guys can't yell at me) is the first step. Once you do that, you can decide what kind of performance that you need. I wrote a guide to Intel CPUs and what the product names mean. With AMD, you have Ryzen 3, Ryzen 5, Ryzen 7, and Ryzen 9, and performance goes according to how high that number is. The same goes with Intel and the Core i3, Core i5, Core i7, and Core i9.
Intel has a bunch of different suffixes. If there isn't one, it's a standard 65W desktop processor, so something like a Core i5-11600 is pretty mainstream. Add a K and it's now a 125W processor that's unlocked for overclocking. And as mentioned above, an F means that it does not have integrated graphics, so you'll need a graphics card.
Pick a motherboard, or a case, or both​Next, you have to pick a motherboard and a case. I'm including both in this section because it's a matter of priorities. Do you want a case that fits your motherboard or a motherboard that fits your case? If you already know what case you want to use, start there and find motherboards that work. If not, start with a motherboard that has what you want.
First, let's cut your motherboard choices in half. If you're using AMD Ryzen, you need an AM4 socket. In you're using Intel 10th- or 11th-gen, you need an LGA 1200 socket. Note that with Intel, 12th-gen will use a new socket, so this is not upgradeable.
Next, you have to pick the size of your motherboard, and this is where compatibility with the case comes in. There's eATX, ATX, mATX, and mini-ITX, all in size order. This very much comes down to how big of a PC you want to build. Looking for something that's super-small and can hide behind your monitor? That's where mini-ITX comes in. Want something big and beefy that's going to have some serious power and thermals? Go for eATX.
When picking a case, it will tell you what size board it can fit. Obviously, the CPU, motherboard, and case choices go hand in hand.
Now that you've narrowed down your motherboard choices to the socket and the size, you're in good shape. It's time to start looking at ports, PCIe slots, and more. Make sure that you've got the ports to plug in what you need and the latest USB standard. Make sure you've got enough memory slots. A big one is the graphics card you want to use. Make sure there's room for it not only on the board, but in the case.
Pick a CPU cooler and thermal paste​Now, it's time to figure out how you're going to keep that CPU cool. Here's the bottom line. The more your CPU heats up, the worse the performance gets. The cooler you can keep it, the more it can sustain peak performance.
The first thing that you have to choose between is air cooling and liquid cooling, and there are pros and cons to each. Air coolers can be easier to install and more cost-effective, but if you want a good one, they take up a lot of space. Liquid cooling can be better if you plan on doing a lot of overclocking.
Personally, I'm a big fan of air coolers from Noctua. I use a Noctua NH-U12A, which is not only designed to be one of the best air coolers around, but it's quiet too.
So, after you decide if you want liquid or air cooling, you then have to looking at how cool it keeps the CPU and also how much noise it makes. That noise is important.
Then there's the thermal paste, which sits between the CPU and the CPU cooler. The more evenly it's applied, the better the cooling. Many CPU coolers, like the one I mentioned above from Noctua, come with thermal paste. You can always shop around though. A tube of thermal paste costs under $10, so using the best one there is should be an easy way to keep your CPU cool.
Pick a power supply and a GPU​As you can see, a lot of these parts go hand in hand. In fact, once you've put this all together, you'll find that they all go hand in hand. But we can't talk about the power supply without picking a GPU.
Picking a GPU is optional. Like I said, you might want a simple productivity machine with a Core i5 and integrated graphics. You also might want a gaming rig with an NVIDIA GeForce RTX 3090. And then there's everything in-between.
With that in mind, you need to pick a power supply. This is an area that you'd definitely be well-off to use PCPartPicker for. It will tell you the wattage of all of the parts you've picked so far, and then tell you if there are any compatibility issues with you pick a power supply. I'd suggest picking one with plenty of wattage to spare so you can upgrade down the line.
Another thing is that you should definitely get a modular PSU (power supply unit). That means that the power cables aren't attached to the PSU itself. You can add cables as you need to, and since you're a builder now, you're probably going to need to at some point.
The other thing that's important is efficiency. You'll see an 80 PLUS rating that can be Bronze, Silver, Gold, Platinum, or Titanium. This is important, because it's based on how much power is lost due to heat.
RAM, storage, and OS​If you've made it this far, you're in good shape. This is the easy part.
With RAM, you want more, and you want faster. It's that simple. You can also look up how fast of memory your CPU supports and go for that. The same goes for storage. An M.2 SSD is the way to go if you can, but there are also SATA SSDs. You can get an HDD if you're on a really tight budget, but I don't recommend it.
As far as the OS goes, it's between Windows and Linux. Windows costs money; Linux doesn't. I'm not really here to tell you which one you should go for.
Putting it all together​Alright, you've got all of your parts and you're ready to build your dream PC! It's the second-most exciting feeling behind the first boot.
Most of this is going to be about plugging things in where they fit, but sadly, it's not that simple. You need to start working through the manuals that came with your motherboard and your case. Those are going to tell you exactly what to plug in where, and most of it is fairly straightforward. There are few things that will actually break if you do them wrong.
The one thing that will break if you do it wrong is installing the CPU in the motherboard. It's important not to apply any unnecessary pressure when doing this because you could bend the pins on the chip or the board (depending on who made the CPU). Damage one of those and you've got some very expensive paperweights very quickly. To be clear, there's nothing to be afraid of here and it's very easy to do. Practice some healthy caution and you'll be fine.
Installing the motherboard in the case is something you'll need to follow instructions to do, which is fine, as it's easy enough. Once it's screwed into place, there will be several cables in the case that have to plug into the board. These will be for fans built into the case, for additional USB ports, and so on.
The other thing you'll have to install in the case is the PSU. Read the instructions and make sure the fan in the PSU is facing the right way. This is not something that you want to do incorrectly. There are a few cables to plug into the case and the board. Once the GPU is installed, you'll have to plug that in too.
Next, you'll probably be installing the CPU cooler. Make sure to apply thermal paste before you do. A pea-sized dot right in the middle of the CPU will do it. Do your best to bring the cooler directly down on the CPU, rather than doing it from an angle. This will spread it evenly across the chip.
Obviously, the graphics card, the storage, and RAM can fit into their respective slot. Note that for most boards, if you have four RAM slots and you only have two RAM sticks, you're better off separating them by one slot for dual-channel memory.
Once that's all done, you should be ready to plug it in and boot it up. You might not want to close the case on first-run, so you can make sure all of the fans are spinning. You can plug your USB drive with the OS into a USB port and boot into it to install the operating system.
Something went wrong!​Well, you've made it this far and now something doesn't work. Isn't that always the way it goes?
The most common problem is probably that you pressed the power button and nothing happened. After all, if the thing that went wrong is that you broke something, you should just buy a new one.
If it's not booting, now it's time to start checking cables. Make sure that everything is plugged in securely, particularly the CPU cooler. Make sure that the PSU cables are plugged in at both ends. If there were any steps you weren't sure about, such as if you plugged something in in the right spot, revisit it.
If you just can't figure it out, come back here and ask for help.
Question @therichwoods --- I'm an extremely heavy user of Chrome. I'm talking dozens of tabs open at all times in multiple windows. I assume I'm going to want to maximize my RAM to take full advantage? Or is CPU/GPU also important in my case?
svetius said:
Question @therichwoods --- I'm an extremely heavy user of Chrome. I'm talking dozens of tabs open at all times in multiple windows. I assume I'm going to want to maximize my RAM to take full advantage? Or is CPU/GPU also important in my case?
Click to expand...
Click to collapse
TBH CPU is always important. But RAM should definitely be a priority.
Hi
Just upgraded my complete system from an AMD FX8350 with 32gb Ram to a Ryzen 5 3600 with 32gb ram. Currently using my old HD7870 Graphics cards in Crossfire but as these are now nine years old am looking to upgrade to a more recent card(s) bearing in mind that I am a pensioner and it has taken me a year to gather new, system, what would you recommend in Graphics cards for this build.
Motherboard is an MSI B450 Gaming Plus Max, Ram is Corsair DDR4 2666 4x8Gb. TIA
Stransky said:
Hi
Just upgraded my complete system from an AMD FX8350 with 32gb Ram to a Ryzen 5 3600 with 32gb ram. Currently using my old HD7870 Graphics cards in Crossfire but as these are now nine years old am looking to upgrade to a more recent card(s) bearing in mind that I am a pensioner and it has taken me a year to gather new, system, what would you recommend in Graphics cards for this build.
Motherboard is an MSI B450 Gaming Plus Max, Ram is Corsair DDR4 2666 4x8Gb. TIA
Click to expand...
Click to collapse
That really depends what you want to do with your graphics card. Looking for a GTX1060/1660 might be a good idea, I had the latter one and you can play a lot of recent games in high settings with your ryzen.
Keep in mind buying a graphics card nowadays is REALLY expensive, even used ones, when you can get one. New ones are sold over the recommended manufacturer prices due to the mining scene and Corona!
Stransky said:
Hi
Just upgraded my complete system from an AMD FX8350 with 32gb Ram to a Ryzen 5 3600 with 32gb ram. Currently using my old HD7870 Graphics cards in Crossfire but as these are now nine years old am looking to upgrade to a more recent card(s) bearing in mind that I am a pensioner and it has taken me a year to gather new, system, what would you recommend in Graphics cards for this build.
Motherboard is an MSI B450 Gaming Plus Max, Ram is Corsair DDR4 2666 4x8Gb. TIA
Click to expand...
Click to collapse
You should've opted for ram with xmp since ryzen benefit the most from faster ram. I'm currently using aorus 3200mhz 2x8gb kit with xmp enabled and it's better compared to it's stock settings.
Insanenity said:
You should've opted for ram with xmp since ryzen benefit the most from faster ram. I'm currently using aorus 3200mhz 2x8gb kit with xmp enabled and it's better compared to it's stock settings.
Click to expand...
Click to collapse
What's XMP?
svetius said:
What's XMP?
Click to expand...
Click to collapse
XMP (Extreme Memory Profiles) is a technology that allows you to change memory settings by selecting a different profile, which takes advantage of higher than standard memory speeds. Simply stated, XMP is the "easy button" of RAM overclocking, as manual RAM overclocking can be an unnecessary headache!
svetius said:
What's XMP?
Click to expand...
Click to collapse
RAM over 2400Mhz is overclocked. X.M.P is just a system to overclock your ram. It's standard now. Personally I wouldn't bother with anything over 3600Mhz as it gets too pricey for the performance. Go no lower than 2666, try for 3200 (this tends to be the cheaper one anyways). I believe you will need to enable X.M.P in your uefi when you install it otherwise you'll just be running 2400. Like Insanenity said, it's just a 1 click setup so there's no fuss.
If you're not focused on gaming; while 16GB is fine, if you find a 32GB kit in your budget than definitely get it. Get a fair CPU with over 6 cores. (so ryzen).
LTT just did a video on something that might interest you.
This could be a good option for your productivity build as it's bang for buck. But if you have the budget for R7 5000's than just go for that.
Tldr: Chrome is a ram and cpu whore, use firefox...
I'm kidding, invest in CPU and RAM more than others if chrome is your concern.
p.s. Feel free to ask questions
strongst said:
That really depends what you want to do with your graphics card. Looking for a GTX1060/1660 might be a good idea, I had the latter one and you can play a lot of recent games in high settings with your ryzen.
Keep in mind buying a graphics card nowadays is REALLY expensive, even used ones, when you can get one. New ones are sold over the recommended manufacturer prices due to the mining scene and Corona!
Click to expand...
Click to collapse
Thanks for the reply. Will just have to hang on to Current cards and hope prices drop in the near future on the GTX 1060/1660 cards. Too expensive for me ATM even second hand
Stransky said:
Thanks for the reply. Will just have to hang on to Current cards and hope prices drop in the near future on the GTX 1060/1660 cards. Too expensive for me ATM even second hand
Click to expand...
Click to collapse
Yeah, unfortunately the prices are beyond the reality... If the bitcoin hype decreases, there might be a chance back to reality
strongst said:
Yeah, unfortunately the prices are beyond the reality... If the bitcoin hype decreases, there might be a chance back to reality
Click to expand...
Click to collapse
I just caught a news story headline that 30-Series cards will be available in stores, soon at reasonable prices soon - as BTC drops below 30K this morning....
HipKat said:
I just caught a news story headline that 30-Series cards will be available in stores, soon at reasonable prices soon - as BTC drops below 30K this morning....
Click to expand...
Click to collapse
Luckily I got my 3060TI in 2020 for a low price, now it costs 50-80% more
strongst said:
Luckily I got my 3060TI in 2020 for a low price, now it costs 50-80% more
Click to expand...
Click to collapse
I looked and Best Buy has it for $399. Less than I paid for my 1080 2 years ago
HipKat said:
I looked and Best Buy has it for $399. Less than I paid for my 1080 2 years ago
Click to expand...
Click to collapse
In stock for 399? Surely out of stock, otherwise it must be a mistake Sounds like the MSRP for the Founders Edition.
strongst said:
In stock for 399? Surely out of stock, otherwise it must be a mistake Sounds like the MSRP for the Founders Edition.
Click to expand...
Click to collapse
I'll go look again when I get a break, but I'm pretty sure you're correct about it being the founders edition

Best components to upgrade?

What would be the best components to upgrade on my setup
Intel Core i5-8400
8GB RAM
1TB HDD
4GB Intel Optane
Nvidia GTX 1050
Kenora_I said:
What would be the best components to upgrade on my setup
Intel Core i5-8400
8GB RAM
1TB HDD
4GB Intel Optane
Nvidia GTX 1050
Click to expand...
Click to collapse
Hello,
that depends on what you want to do with your PC. The mainboard is the base and limiter for all other components except the power supply(in most cases).
Well, i only have a acer pre-built the motherboard is acers....
I want to use it for video rendering or gaming
It can run pretty much anything I think I've seen people upgrade it to an rtx and stuff
@Kenora_I if it was me, and I just did this upgrade 2 weeks ago and am loving it, If your 1tb of storage isn't a Nvme/M.2 I would do that. I had a 2.5 in sata had and for $80 on Newegg I got a WD 1TB sata m.2 and it's night and day difference. Boots in like 15 secs, instant response when multitasking etc. And I just use PC for everything but gaming. So coding/compiling is a mind blown difference lol
If I was you I would start saving for a new built to be honest, aim for a B550/B550M with a Ryzen 5600X for example. Video rendering and gaming will soon become a stretch on that system if it isn't already.
Assuming the power supply is non standard and not easily upgraded, the only real bottleneck that can be remedied is storage. Agree an M2 ssd would be best upgrade likely available.
CamoGeko said:
If I was you I would start saving for a new built to be honest, aim for a B550/B550M with a Ryzen 5600X for example. Video rendering and gaming will soon become a stretch on that system if it isn't already.
Click to expand...
Click to collapse
I have the money, but I just hate the price inflation due to the chip shortages.
Dont wanna end up like one of those people with less RAM performance that LTT demonstrated in one of his vids
Kenora_I said:
I have the money, but I just hate the price inflation due to the chip shortages.
Dont wanna end up like one of those people with less RAM performance that LTT demonstrated in one of his vids
Click to expand...
Click to collapse
I would build new since you have several things that could use an upgrade in the next year or two. Adding upgrades to an older oem board is just money you will never recover for an end result of a PC still in need of a mobo upgrade.
Building new doesn't have to be that expensive nor does it have to be overpriced ryzen. I threw together an example here . Room to expand RAM by 2 slots later if needed. Less than $600 bucks and could use your GTX 1050 until you get an email that it's your turn to buy card at MSRP.
EVGA's notify list works, may take 2 or 3 months but you can get a card at MSRP.
In my opinion it would be best to wait until prices falls down to regular prices.
But you may consider getting SSD and HDD as you've mentioned you would be playing games and 1TB isn't sufficient.
You can look for case or better case fan if needed.
Mechanical keyboard and Mouse can be consider too.
You haven't mentioned about the PSU you may also consider that if you are looking forward to getting power hungry GPU in future.
Get a cooler if needed if prices are fair enough for it. (if you get one then get one where you don't have to buy one if you choose to upgrade to latest CPU.
In my opinion this are some possible upgrade you can make with your currant build.
If in case you choose to make new build in future then don't upgrade anything in this build presuming that you don't have any issue with currant build and your build gets job done.
In short upgrade if needed or just don't upgrade besides storage.
tek3195 said:
EVGA's notify list works, may take 2 or 3 months but you can get a card at MSRP.
Click to expand...
Click to collapse
I have been on the EVGA list since beginning of the year, the only email I got from them was to tell me they're swapping the model I actually wanted to a low hash model. Thanks EVGA, how about you just make me a GPU. It's been 6 months.
CamoGeko said:
I have been on the EVGA list since beginning of the year, the only email I got from them was to tell me they're swapping the model I actually wanted to a low hash model. Thanks EVGA, how about you just make me a GPU. It's been 6 months.
Click to expand...
Click to collapse
Must depend on model. I signed up in Feb. and didn't have the money when 1660 ti came up, resubmitted for 1660 super and got it a couple of weeks ago. It's gotta be model, location shouldn't matter I wouldn't think. I don't know how they do it, but 6 months sucks.
CamoGeko said:
I have been on the EVGA list since beginning of the year, the only email I got from them was to tell me they're swapping the model I actually wanted to a low hash model. Thanks EVGA, how about you just make me a GPU. It's been 6 months.
Click to expand...
Click to collapse
lol
ohjabarn said:
Tempted to upgrade my 2080 ti to a gigabyte 3080 ti so got it from NEWEGG however not certain my PSU would be adequate. PSU and everything (I imagine) that draws power are recorded underneath:
1 x Seasonic Focus Plus 750W 80 Plus Gold Modular Power Supply
1 x Intel Core i9-9900K 3.6GHz (Coffee Lake) Socket LGA1151 Processor
1 x Gigabyte Z390 Aorus Elite Intel Z390 (Socket 1151) DDR4 ATX Motherboard
1 x Corsair Vengeance LPX 16GB (2x8GB) DDR4 PC4-24000C16 3000MHz Dual Channel Kit
1 x Samsung 2TB 860 EVO SSD 2.5" SATA 6Gbps 64 Layer 3D V-NAND Solid State Drive
6 x Corsair ML120 Pro RGB 120mm Premium Fan with Lighting Node
1 x Be Quiet Dark Rock Pro 4 air cooler
Cheers generally functioning admirably.
Click to expand...
Click to collapse
You should be good, 750W is what EVGA Power Meter recommends for the components you listed. There are quite a few power supply calculators available online.
So, it really depends on what you want to do with your PC. Do you want to make your PC more suitable for gaming or work? As an example, I use editing software from Movavi and it requires a lot of good components such as SSD, high-end processor and of course a lot of RAM. From my point of view, you need to change your HDD to SSD and add more RAM, so you'll have a very powerful machine.
Now would be the time to start looking at things as prices are falling.

My PC, any idea on what to update next ?

Hey, here are the specs of my current desktop. I bought it back in June 2018, and since only added more ram and an HDD, also most of my peripherals.
Specs :
CPU : Intel i5 8400
CPU cooler : Be quiet, I don't know what exactly
RAM : 16 GB Dual-Channel "DDR4 Ballistix" @ 1366MHz --> 2 at 2400MHz and 2 at 2666MHz each 4096 MB
Motherboard: ASUS TUF Z370-PLUS GAMING
GPU : 3071 MB NVIDIA GeForce GTX 1060 3 GB (EVGA)
Storage : - 232 GB Samsung SSD 860 EVO 250 GB (SATA (SSD))
- 931 GB Seagate ST1000DM010-2EP102 (SATA)
- 931 GB Seagate ST1000DM010-2EP102 (SATA)
Power supply : I don't know, but I remember it being good 500-650W, 80+Gold, I think.
I want it to be better, any ideas on what should I update first ?
Noe367 said:
Hey, here are the specs of my current desktop. I bought it back in June 2018, and since only added more ram and an HDD, also most of my peripherals.
Specs :
CPU : Intel i5 8400
CPU cooler : Be quiet, I don't know what exactly
RAM : 16 GB Dual-Channel "DDR4 Ballistix" @ 1366MHz --> 2 at 2400MHz and 2 at 2666MHz each 4096 MB
Motherboard: ASUS TUF Z370-PLUS GAMING
GPU : 3071 MB NVIDIA GeForce GTX 1060 3 GB (EVGA)
Storage : - 232 GB Samsung SSD 860 EVO 250 GB (SATA (SSD))
- 931 GB Seagate ST1000DM010-2EP102 (SATA)
- 931 GB Seagate ST1000DM010-2EP102 (SATA)
Power supply : I don't know, but I remember it being good 500-650W, 80+Gold, I think.
I want it to be better, any ideas on what should I update first ?
Click to expand...
Click to collapse
That's not a bad system in any way! The question is, in which application should your PC be better? A game? Video rendering?
And What is your resulution of your monitor(s) where your GTX1060 has to deal with?
strongst said:
That's not a bad system in any way! The question is, in which application should your PC be better? A game? Video rendering?
And What is your resulution of your monitor(s) where your GTX1060 has to deal with?
Click to expand...
Click to collapse
I mostly play game, but also use a lot of cpu in others programs, so the CPU is often at 100% because of the types of games and multitasking, the GPU is also often overused, but it can be changed by reducing in game graphics but a bit annoying. Also, I have two monitors, one 2560*1440 @ 144Hz and the other is 1920*1080 @ 75Hz. I know right now GPU are a bit expensive, but if I want to change CPU I will most probably have to change the motherboard too.
Noe367 said:
I mostly play game, but also use a lot of cpu in others programs, so the CPU is often at 100% because of the types of games and multitasking, the GPU is also often overused, but it can be changed by reducing in game graphics but a bit annoying. Also, I have two monitors, one 2560*1440 @ 144Hz and the other is 1920*1080 @ 75Hz. I know right now GPU are a bit expensive, but if I want to change CPU I will most probably have to change the motherboard too.
Click to expand...
Click to collapse
Yeah, the 1060 can't handle >1080p gaming at 144hz good, that's the main part you should update. You can check my Ryzen build here where I'm using similar resolutions for the monitors.
The 3060ti might be a good choice. I don't talk about the current prices at all, you know...
You can update to an i9-9900k which is ~30% faster than yours. But your processor isn't that bad, it might be more the lot of multiple tasks where you should think about more cores (10/16) in general
If you have more available bandwidth and ports consider adding more drives for the OS.
Depending on the Intel firmware there may be some interesting Raid options.
Explore your page file/drive options as well.
Just make sure to clone the OS drive for easy restore, clone before installing antivirus apps.
Keep the data off the OS drive, just apps.
Never clone data drives; copy only! Cloning media files can cause you to lose needed null marks.
strongst said:
Yeah, the 1060 can't handle >1080p gaming at 144hz good, that's the main part you should update. You can check my Ryzen build here where I'm using similar resolutions for the monitors.
The 3060ti might be a good choice. I don't talk about the current prices at all, you know...
You can update to an i9-9900k which is ~30% faster than yours. But your processor isn't that bad, it might be more the lot of multiple tasks where you should think about more cores (10/16) in general
Click to expand...
Click to collapse
Thanks a lot ! Very useful
blackhawk said:
If you have more available bandwidth and ports consider adding more drives for the OS.
Depending on the Intel firmware there may be some interesting Raid options.
Explore your page file/drive options as well.
Just make sure to clone the OS drive for easy restore, clone before installing antivirus apps.
Keep the data off the OS drive, just apps.
Never clone data drives; copy only! Cloning media files can cause you to lose needed null marks.
Click to expand...
Click to collapse
I might buy a .m2 drive
Noe367 said:
I might buy a .m2 drive
Click to expand...
Click to collapse
I not up to date at all on the new mobos and drives... I run dinosaurs
ID your bottlenecks.
Research it thoroughly, even then it will be by trial and error.
Playing with the page file (maybe adding another fast dedicated drive) may yield good results with minimal expense/effort.
blackhawk said:
I not up to date at all on the new mobos and drives... I run dinosaurs
ID your bottlenecks.
Research it thoroughly, even then it will be by trial and error.
Playing with the page file (maybe adding another fast dedicated drive) may yield good results with minimal expense/effort.
Click to expand...
Click to collapse
Yeah, thanks !!
Noe367 said:
I mostly play game, but also use a lot of cpu in others programs, so the CPU is often at 100% because of the types of games and multitasking, the GPU is also often overused, but it can be changed by reducing in game graphics but a bit annoying. Also, I have two monitors, one 2560*1440 @ 144Hz and the other is 1920*1080 @ 75Hz. I know right now GPU are a bit expensive, but if I want to change CPU I will most probably have to change the motherboard too.
Click to expand...
Click to collapse
Go for a mobo with all solid state caps and preferably no electrolytics which invariably fail with age.
Gigabyte has been making all solid state mobos for over a dozen years.
blackhawk said:
Go for a mobo with all solid state caps and preferably no electrolytics which invariably fail with age.
Gigabyte has been making all solid state mobos for over a dozen years.
Click to expand...
Click to collapse
Again, thank you, very helpful
Noe367 said:
Again, thank you
Click to expand...
Click to collapse
You're welcome.
Don't skip on the power supply*. Get the best you can find. A failed supply can be a real pain to troubleshoot.
Make sure it's minimum rated output supports your devices on that rail. Probably not an issue but be aware of it.
Most importantly make sure you have lots of head room on all the supply rails especially the lower voltage ones. Leave room for expansion.
Overrate by at least 20% of expected maximum surge demand for all rails.
Look closely at build quality. Does it look well built using epoxy PCBs and heavy wires?
A clean, neat layout?
Quality fans and excellent ventilation that conform to your case layout/venting needs?
Enough direct outputs to minimize preferably eliminate daisy chaining?
Long enough for the mobo and graphics card?
Note the exit point for cables, do they integrate well with your case design/layout?
Fun times
*a good case is a joy to work with and helps to protect your investment.
blackhawk said:
You're welcome.
Don't skip on the power supply*. Get the best you can find. A failed supply can be a real pain to troubleshoot.
Make sure it's minimum rated output supports your devices on that rail. Probably not an issue but be aware of it.
Most importantly make sure you have lots of head room on all the supply rails especially the lower voltage ones. Leave room for expansion.
Overrate by at least 20% of expected maximum surge demand for all rails.
Look closely at build quality. Does it look well built using epoxy PCBs and heavy wires?
A clean, neat layout?
Quality fans and excellent ventilation that conform to your case layout/venting needs?
Enough direct outputs to minimize preferably eliminate daisy chaining?
Long enough for the mobo and graphics card?
Note the exit point for cables, do they integrate well with your case design/layout?
Fun times
*a good case is a joy to work with and helps to protect your investment.
Click to expand...
Click to collapse
Awesome !
This beast or similar. The power supply goes on the bottom.
Amazon.com: Antec P101 Silent Performance Series Mid-Tower PC Computer Case with Sound Dampening Panels, 4 X 120/140mm Cooling Fans Pre-Installed : Everything Else
Buy Antec P101 Silent Performance Series Mid-Tower PC Computer Case with Sound Dampening Panels, 4 X 120/140mm Cooling Fans Pre-Installed: Everything Else - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
First of all, I don't want to offend anybody that has commented their suggestions already, but in my opinion most of the replies are pretty lackluster to say the least.
Now, I saw you mentioned that you mostly play games on your PC. I'd say your CPU is still perfectly fine for most modem games, the GPU is another story though. While the standard 1060 is still a decent card, your version only has 3 GB of VRAM. This is becoming more and more of a problem in modern titles and you should consider upgrading, I'd say at least to a 6 GB 1060. Of course, the current market is awful and you shouldn't spend too much money on that old of a GPU, but if you can find one at a decent price, it might be worth a buy.
Other than that, your system is pretty well specced out in my opinion, you might want to sort out that RAM situation and get a matching kit of DDR4 at a decent clock speed, your description seems a bit all over the place in that regard. 16 GB of RAM is still perfectly fine, I wouldn't recommend a capacity upgrade, but matching sticks with matching speeds can do wonders.
Furthermore, I'd consider a bigger SSD, but your current storage configuration should provide enough space and as long as the OS is located on the SSD performance shouldn't be too bad either.
Finally, whatever you do, getting a 9900k, like somebody suggested, is a bad idea in my opinion. If you don't want to do any serious overclocking or have to do **very** CPU-intensive tasks, your 8400 should still hold up well. If you go for a 9900k you might as well build a new system because you're probably gonna need a new motherboard, CPU Cooler and definitely a GPU upgrade so the 9900k doesn't have to live in bottleneck hell. Incase you absolutely want to upgrade the CPU, I'd say go for an i7 of the 8th generation, as you'll be able to expect better performance than from your i5 thanks to multithreading while not having to upgrade any others parts mentioned above.
So, to conclude: You should upgrade your GPU. Go for something like the 6 GB 1060 or better. Search around on the internet for GPUs that work well with your processor. Maybe get some matching RAM. If you still have money to spend, a bigger SSD might make everything a bit snappier. I wouldn't consider upgrading the CPU.
And, a last final note: Make sure you don't exceed your PSU's wattage, definitely check before buying any upgrades.
littlegamer757 said:
First of all, I don't want to offend anybody that has commented their suggestions already, but in my opinion most of the replies are pretty lackluster to say the least.
Now, I saw you mentioned that you mostly play games on your PC. I'd say your CPU is still perfectly fine for most modem games, the GPU is another story though. While the standard 1060 is still a decent card, your version only has 3 GB of VRAM. This is becoming more and more of a problem in modern titles and you should consider upgrading, I'd say at least to a 6 GB 1060. Of course, the current market is awful and you shouldn't spend too much money on that old of a GPU, but if you can find one at a decent price, it might be worth a buy.
Other than that, your system is pretty well specced out in my opinion, you might want to sort out that RAM situation and get a matching kit of DDR4 at a decent clock speed, your description seems a bit all over the place in that regard. 16 GB of RAM is still perfectly fine, I wouldn't recommend a capacity upgrade, but matching sticks with matching speeds can do wonders.
Furthermore, I'd consider a bigger SSD, but your current storage configuration should provide enough space and as long as the OS is located on the SSD performance shouldn't be too bad either.
Finally, whatever you do, getting a 9900k, like somebody suggested, is a bad idea in my opinion. If you don't want to do any serious overclocking or have to do **very** CPU-intensive tasks, your 8400 should still hold up well. If you go for a 9900k you might as well build a new system because you're probably gonna need a new motherboard, CPU Cooler and definitely a GPU upgrade so the 9900k doesn't have to live in bottleneck hell. Incase you absolutely want to upgrade the CPU, I'd say go for an i7 of the 8th generation, as you'll be able to expect better performance than from your i5 thanks to multithreading while not having to upgrade any others parts mentioned above.
So, to conclude: You should upgrade your GPU. Go for something like the 6 GB 1060 or better. Search around on the internet for GPUs that work well with your processor. Maybe get some matching RAM. If you still have money to spend, a bigger SSD might make everything a bit snappier. I wouldn't consider upgrading the CPU.
And, a last final note: Make sure you don't exceed your PSU's wattage, definitely check before buying any upgrades.
Click to expand...
Click to collapse
Thanks, now I have the choice and many opinions to make my own choice
blackhawk said:
This beast or similar. The power supply goes on the bottom.
Amazon.com: Antec P101 Silent Performance Series Mid-Tower PC Computer Case with Sound Dampening Panels, 4 X 120/140mm Cooling Fans Pre-Installed : Everything Else
Buy Antec P101 Silent Performance Series Mid-Tower PC Computer Case with Sound Dampening Panels, 4 X 120/140mm Cooling Fans Pre-Installed: Everything Else - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Click to expand...
Click to collapse
I have an In Win, this is fine for me, for the moment. Will also see that !
Noe367 said:
I have an In Win, this is fine for me, for the moment. Will also see that !
Click to expand...
Click to collapse
It's a real clean layout. Power harnesses run behind a steel inner panel for better shielding, out of sight and out of the way.
Plenty of cooling with the ability to expand cooling if needed. It's solid and heavy.
Antec cases come with a parts manifest as well.
blackhawk said:
It's a real clean layout. Power harnesses run behind a steel inner panel for better shielding, out of sight and out of the way.
Plenty of cooling with the ability to expand cooling if needed. It's solid and heavy.
Antec cases come with a parts manifest as well.
Click to expand...
Click to collapse
Oh cool, will look into that when needed !
Noe367 said:
Hey, here are the specs of my current desktop. I bought it back in June 2018, and since only added more ram and an HDD, also most of my peripherals.
Specs :
CPU : Intel i5 8400
CPU cooler : Be quiet, I don't know what exactly
RAM : 16 GB Dual-Channel "DDR4 Ballistix" @ 1366MHz --> 2 at 2400MHz and 2 at 2666MHz each 4096 MB
Motherboard: ASUS TUF Z370-PLUS GAMING
GPU : 3071 MB NVIDIA GeForce GTX 1060 3 GB (EVGA)
Storage : - 232 GB Samsung SSD 860 EVO 250 GB (SATA (SSD))
- 931 GB Seagate ST1000DM010-2EP102 (SATA)
- 931 GB Seagate ST1000DM010-2EP102 (SATA)
Power supply : I don't know, but I remember it being good 500-650W, 80+Gold, I think.
I want it to be better, any ideas on what should I update first ?
Click to expand...
Click to collapse
gaming wise, GPU should be a priority
multi-tasking wise, buy the newest intel gen 10 or 11 also you can opt for AMD
Core i5 11th gen is a wise option
ryzen 5 3600 still good too
you'll need cpu and motherboard too

Question Advice on PC setup

I'm running a resin 3d printer (Elegoo Saturn 2), but my current PC isn't able to keep up or handle the work load...
So I'm in need of a new system, but having a hard time narrowing down the overwhelming options these days. After looking around, I have a rough idea of the specs I'll need in order to run Blender and Chitubox slicing software.
I'm looking for a desktop system with 32GB RAM capacity, a decent video card, CPU and min Windows 7 64bit.
Does anyone have any suggestions on decent systems that are more affordable than a gaming system??
I'm a noob to 3D printing, so any advice would be so helpful and appreciated!!
{Mod edit: Quoted post has been deleted. Oswald Boelcke}
Thanks so much for your reply!
I'm currently looking at a few different refurb options, that seem like they would fit the bill in terms of RAM, CPU and Storage (combined between HDD & SSD). The only thing I'm hesitant on is they all have integrated video card (Intel); and from everything I've seen, most are suggesting that I'll need a dedicated card to accommodate the rendering/modeling software...
Do you think this would be an issue, or could I get away with the integrated card?
BBCro said:
I'm running a resin 3d printer (Elegoo Saturn 2), but my current PC isn't able to keep up or handle the work load...
Click to expand...
Click to collapse
What aspect is it not able to keep up with?
Takumidesh said:
What aspect is it not able to keep up with?
Click to expand...
Click to collapse
RAM and Graphics mostly.
It's a dinosaur and can't run the Blending and Slicing software properly on 8GB of RAM.
GPU is a very important part for rendering. You should look for a GPU with atleast 6GB VRAM. For CPU, good clock and more cores will be great. And for RAM You should not only look for more RAM but for faster RAM.
One cheap way is a server tower with 2 quad core 3.4 mhz prosesers £10 ebay, 32 gb server ram very cheap £20 and descent graphics card with 6 gb memory s/h £60.

Categories

Resources