Database Users

How To: EB13 Froyo Download/Install and OTA!

- It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung)
- Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work.
Click to expand...
Click to collapse
"Force OTA"
UPDATE:: IF you cannot for whatever reason load the file to your SD Card, gmail yourself the link (below) and download it using Dolphin HD browser. I just confirmed it works on my phone, however, it does not work with the stock browser. Check the market for Dolphin HD, it's free. Client mode is set to desktop, which is under settings once in Dolphin HD. I was able to download the update.zip to the phone rather quickly over 4G Other browsers may work, I prefer that one though. Doesn't hurt to try. The stock one will not save the file, though will navigate to it.
As I first posted yesterday, there are [now 3] ways of downloading and installing the new EB13 Froyo release. If you have a Windows PC, there is a new utility that Samsung has released to flash the phone via PC. I personally couldn't get it to run on my Win 7 x64 laptop due to the enlarged font I run on my high-res laptop screen. Additionally, the 200MB file will wipe your phone completely clean. If you have a "trouble free" factory install of the current 2.1.1, the update method contained here is your best bet. Trouble free meaning that only bugs of the software are present. If you have issues above and beyond that of all other eclair users, you may want to completely wipe your phone.
The easiest and fastest method is to visit Samsung's Sprint Epic download page here http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR and click the "Software" link (Manuals is the default landing page) and download the 91.14MB File labeled as for MAC OS. You will notice the much larger windows download (200MB) which is not needed, and may not work.
After you download the zip file, copy it over to your SD Card in your phone by either hooking it up and mounting it as you would normally do to copy files to your phone, or as I did, place the Micro SD card into an adapter and insert it into your computer. Copy the .zip file you downloaded onto the SD card; do not place it into any directory.
With your phone powered off, insert the SD Card back into the phone and replace the battery cover. Now, while holding both volume up and volume down rocker buttons (yes, you can push both at the same time), hold the camera button down as well and then press and hold the power on key. You will hold all 4 buttons on the phone until it boots into the flash menu.
Use the volume down button to scroll to..
"Apply SDcard: Update.Zip"
Push the Home key on the bottom of the phone and the update will commence.
Once it's complete, the phone may reboot into the menu again, at which time you select "Reboot" and hit the home key again.
The phone may reboot a few more times after it's first boot, and it may take a few minutes to fully get up and running. If it acts strange for a few minutes, this is normal.
Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work. No ROMS, etc may be installed for the update to work. Before doing the update, go through your applications and uninstall anything you don't want / use.
You may also wait for the OTA update, but it will take a while to download, use up your battery, and you have to wait longer. It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung) DO NOT waste time using a link to another file, there is no point and only risk in obtaining the file from somewhere else.
Before I began, I copied things off of my SD card that I wanted and performed a format on it. If you have apps installed on the SD Card, and you choose to do this, you may need to reinstall them. Once the update was complete, I copied the directories and files back to the SD Card.
(STICKY worthy!) No other post has this info immediately at hand.

Bump. I am seeing new posts answered by this.......

i don't know

http://forum.xda-developers.com/showthread.php?t=963652
It's already been done...

Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.

NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Personally, I think Whosdaman's version is much more concise. Perhaps you meant yours is more convoluted or wordy? But hey, potato, tomato, right?

NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me

Whosdaman said:
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me
Click to expand...
Click to collapse
You're welcome. And I'm guessing he was referring to how you linked to Briefmobile and outside files?

NoSoMo said:
Perhaps you should read the steps and not just do a character count? Personally I wouldn't subject the information on my phone to a that of a file that someone put on a download site.
- Get update file
- Place on SD Card
- Boot phone in flash mode and begin
Odin not required
Absolutely, sure it's full of other info, but it's info that's been asked numerous times.
Click to expand...
Click to collapse
Fair enough about not wanting to DL something that you can't verify the source... On a positive note, those three steps are exceptionally concise!

Does this work on DK28 Froyo? Probably not, eh?

I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?

mynewepic10 said:
I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
Click to expand...
Click to collapse
This has been answered in one of those posts with several hundred replies (if I had the answer on-hand, I would post it). I kept the Epic stock to avoid any issues, so my update was rather simple. A few people have already had to reload their phones a couple of times before everything worked out.
nonzenze said:
Does this work on DK28 Froyo? Probably not, eh?
Click to expand...
Click to collapse
DK28 wasn't official. The latest official release is DI18 - 2.1.1. This updates STOCK 2.1.1 ONLY.
I didn't care to fool with the phone originally due to not knowing the exact release date of froyo. It has been way over due, but I honestly didn't have any reason to mod. Froyo has enhanced the phone, but honestly doesn't provide anything new that would change the way I already use the device. GPS is faster to acquire in google maps, but in GPS Test, it was always fairly instant. It's also reports more accurate, reports being key, it wasn't ever off but by 20 feet anyway, which is about all you can expect on 3D accuracy.

I used the .exe file from Samsung website to flash my phone and works like a champ.
Now some minor quirks with Froyo but will address them in different threads.
Thanks for the help!!
Dakrk

Updated the post, you can download the file directly to the phone. Send yourself the link via gmail....and read the first post of this thread.....

This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!

D623 said:
This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!
Click to expand...
Click to collapse
Glad to hear it

Doesn't work on DK28

Thank you for the clear instructions
I appreciated all the details in your instructions.
I downloaded to a blank xtra SD as you did and it all went very smoothly the first time.
Data, everything is retained.
Thank YOU.

up it goes

Thank you,i got bored waiting for ota.
Sent from Maxwell's shoe.

[Q] Amatuer Noob needs help

I just got my NC and decided to give this a try instead of buying a N2A card.
Android Version 2.3.7
Kernel version 2.6.32.9
Mod Version CyanogenMod-7.1.0-encore
build Number GWK74
ClockworkMod 3.2.0.1
When I initially booted off the memory card everything was smooth until gapp. It loaded but when it came to selecting the apps when I clicked on one it flashed and just continued to set up. It didn't let me select any. No big deal because it worked fine.
I had force close issues so I ran Fix Permissions through ROM Manager and this seemed to help except for a few apps.
I used LCDDensity and changed that to 161 with Kill All which cleared up my force close issues on Words With Friends and Tweetcaster.
I get on today and notice videos are now missing from the market main screen and apps that I had yet to install are now no longer compatible with my device. They were last night but I was picking and choosing what I wanted on here. Why the sudden change? I rebooted the device just a few minutes ago and now the sudden change.
I also read about clearing davlik cache but how do you do this? I am not a programmer or developer so I have no clue. I have spent hours reading here everyday since Christmas and my mind is melting. I tried rebooting into recovery but I do not get the option to do anything. The penguin appears and a few things scroll down the screen and it reboots. I tried using the emulator and that won't work either unless I am typing something in wrong.
Are there any other tweaks or things I need to do to keep things stable and running smoothly? Are their certain things I need to clear regularly i.e. davlik cache, application cache or data?
I appreciate all the hard work and the time everyone puts into this. Please help. Like I said I need kindergarten instructions. Thank you.

First off, I've never had much success running from uSD. Even as far back as NookieFroyo. Once I made the move to running from eMMC most of my issues disappeared.
Davlik can be wiped from the Advanced selection when you boot to CWM as can Fix Permissions.

If you are going to run from SD then it is highly advisable to use a Sandisk Class 2 or 4 card. The brand does make a difference and others have found that other makes lead to slow downs and instabilities.
I would also recommend starting again following the veryGreen SD install method
http://forum.xda-developers.com/showthread.php?t=1000957
and using the MiRaGe KANG ROM.
http://forum.xda-developers.com/showthread.php?t=1344873
This is CM7 but with the latest improvements including kernel adding to stability and performance.

Also, never use Windows to format your uSD. The format utility in Windows can (and does) screw up the format. Use this freebie. Has always worked well for me. You would be surprised how many problems that involve uSDs are traced back to a bad format.

I used LCDDensity and changed that to 161
Click to expand...
Click to collapse
Setting to 161, you are asking for more issue.
Suggestion: set it back to 160.

skeeterpro said:
First off, I've never had much success running from uSD. Even as far back as NookieFroyo. Once I made the move to running from eMMC most of my issues disappeared.
Davlik can be wiped from the Advanced selection when you boot to CWM as can Fix Permissions.
Click to expand...
Click to collapse
How do I get to the Advance section and boot to CWM? When I try it through ROM Manager the device restarts with the penguin and after a few lines it says the system is ****ting down. It does not give me any menu options.
votinh said:
Setting to 161, you are asking for more issue.
Suggestion: set it back to 160.
Click to expand...
Click to collapse
I read that this was recommended and when I do it my apps that have issues work and they work well. No more force close issues.
Thanks for the advice guys. Like I said I have no experience with any of this. I am learning though and love to tinker with things and figure out how they work.

bobtidey said:
If you are going to run from SD then it is highly advisable to use a Sandisk Class 2 or 4 card. The brand does make a difference and others have found that other makes lead to slow downs and instabilities.
I would also recommend starting again following the veryGreen SD install method
http://forum.xda-developers.com/showthread.php?t=1000957
and using the MiRaGe KANG ROM.
http://forum.xda-developers.com/showthread.php?t=1344873
This is CM7 but with the latest improvements including kernel adding to stability and performance.
Click to expand...
Click to collapse
I did the veryGrenn SD install. Is there a link on how to install a new ROM. I read the link but I just do not understand it.

jsnake said:
I did the veryGrenn SD install. Is there a link on how to install a new ROM. I read the link but I just do not understand it.
Click to expand...
Click to collapse
To update the ROM on an SD card install power down, remove card then you put the card back onto the PC and copy the new ROM zip onto it but named as update-cm-*.zip. Put the card back in the Nook and power up with N button pressed until you see the screen flash. Choose reboot recovery and the new zip will be installed.
However, if you are doing a major ROM switch and haven't invested too much time installing apps etc yet then I would recommend just doing the VeryGreen install from the beginning to get a clean install.

I did a clean install and so far things are working well. Base off of the veryGreen install are there any "must have" settings or tweaks I need to do to keep things smooth? Any nook or CM7 apps you guys would recommend. I know it has been answered 50,000 times but I am losing sleep reading the forums here.
Thanks again for the help and your patience.

There are so many of apps that suitable for each individual personality, for me:
+ news: usatoday, bbc
+ sport: Y!spectacular, mobile sport
+ movie: flixter, moviefone
+ picture viewing: quickpic (must have)
+ time: clocksync (must have)
+ file navigate: file expert (must have), astro file manager
+ player: rockplayer
+ ebook: Mantano (recommended)
+ weather: fancy widget
+ web browser: Opera (like better), dophin HD
+ calculator: TI-83/86 emulators, also mortgage cal. and real science cal.
+ game: none
+ sex pos.: forget the name
+ few others that occasionally use.

Every one gets their own favorite apps to suit their interests. I personally go for ES file explorer for general file navigation and accessing my computers' shares wirelessly, Dolphin HD browser for the gesture navigation, moboplayer for playing media, and QuickPic for photo viewing.
But don't forget Nook Tweaks. This allows you to tweak the kernel and benefit from some of the good things in there that distinguish the Dalingrin CM7 kernel. Like overclocking to get a really good boost in performance (most people go for 1200MHz max for stability), undervolting to stretch the battery a bit, audio settings to make the stock feeble audio considerably louder (set DAC boost about 50%), and USB hosting if you want to connect USB peripherals.

jsnake said:
How do I get to the Advance section and boot to CWM? When I try it through ROM Manager the device restarts with the penguin and after a few lines it says the system is ****ting down. It does not give me any menu options.
Really? You are sure it's CWM 3.2.0.1? When you boot to recovery you don't get a Menu? If not, methinks your CWM is hosed. Have to say I do not ever recall not getting a CWM Menu. Nor can I call up seeing a "penguin"?
Have to say also ROM Manager is quirky at best. Used it a long time ago and found that it whacked my NC. Uninstalled and never used again. Found it was incompatible with other devices.
You might consider a new uSD install.
Click to expand...
Click to collapse

skeeterpro said:
Really? You are sure it's CWM 3.2.0.1? When you boot to recovery you don't get a Menu? If not, methinks your CWM is hosed. Have to say I do not ever recall not getting a CWM Menu. Nor can I call up seeing a "penguin"?
Have to say also ROM Manager is quirky at best. Used it a long time ago and found that it whacked my NC. Uninstalled and never used again. Found it was incompatible with other devices.
You might consider a new uSD install.
Click to expand...
Click to collapse
I'm not using SD CM7 currently myself but my recollection when I did is that the recovery is not a full clockwork but a stripped down one just designed to install update zips. As such you don't get the full menu and operation from ROM manager isn't going to work properly.

skeeterpro said:
Really? You are sure it's CWM 3.2.0.1? When you boot to recovery you don't get a Menu? If not, methinks your CWM is hosed. Have to say I do not ever recall not getting a CWM Menu. Nor can I call up seeing a "penguin"?
Have to say also ROM Manager is quirky at best. Used it a long time ago and found that it whacked my NC. Uninstalled and never used again. Found it was incompatible with other devices.
You might consider a new uSD install.
Click to expand...
Click to collapse
On this clean install I finally got it to work and there is no penguin. Just the menu that I should see so I finally cleared davlik cache.
I downloaded nook Tweaks as well.

jsnake said:
On this clean install I finally got it to work and there is no penguin. Just the menu that I should see so I finally cleared davlik cache.
I downloaded nook Tweaks as well.
Click to expand...
Click to collapse
Excellent! So all is well?
---------- Post added at 01:09 AM ---------- Previous post was at 01:09 AM ----------
bobtidey said:
I'm not using SD CM7 currently myself but my recollection when I did is that the recovery is not a full clockwork but a stripped down one just designed to install update zips. As such you don't get the full menu and operation from ROM manager isn't going to work properly.
Click to expand...
Click to collapse
Makes sense. Thanks for the clarification.

bobtidey said:
To update the ROM on an SD card install power down, remove card then you put the card back onto the PC and copy the new ROM zip onto it but named as update-cm-*.zip. Put the card back in the Nook and power up with N button pressed until you see the screen flash. Choose reboot recovery and the new zip will be installed.
However, if you are doing a major ROM switch and haven't invested too much time installing apps etc yet then I would recommend just doing the VeryGreen install from the beginning to get a clean install.
Click to expand...
Click to collapse
So I have done a clean install of veryGreen exactly as posted except that I have the latest stable instead of a nightly. So do I simply download that ROM file and do as you stated for MiRaGe Kang? Just asking because on that link there is a bunch of different things listed and I get kind of lost. All I need is the ROM file and follow what you said quoted above?
Thanks again.
I tried renaming the file but it says the name cannot contain * so what am I doing wrong. Searched the forums and can't find the answer.

jsnake said:
So I have done a clean install of veryGreen exactly as posted except that I have the latest stable instead of a nightly. So do I simply download that ROM file and do as you stated for MiRaGe Kang? Just asking because on that link there is a bunch of different things listed and I get kind of lost. All I need is the ROM file and follow what you said quoted above?
Thanks again.
I tried renaming the file but it says the name cannot contain * so what am I doing wrong. Searched the forums and can't find the answer.
Click to expand...
Click to collapse
The * is just shorthand for any name. You can't include * in the actual name as it is a wildcard character that matches any part of a name. The important part is that the new name starts with update-cm- so you can just put that on the front of the MiRaGe zip (which is all you need).

Thank you. I figured it out kind of. I downloaded that ROM and followed the instructions and rooted my nook which I did not want to do. I wanted to dual boot off the memory card. It is all a learning experience.
I did a factory restore and all was good again. Started fresh and was going for a new verygreen install and my memory card slot no longer locks the card in. I am so thankful I had completed the factory reinstall. My wife went to B&N today and exchanged it for me with no issue.
So for now I think I will stick to the verygreen install and tweak it to my liking until something stable for ICS comes about.
Thanks for your patience and help. Some really good people here helping out.

[Q] Nook Color - Google Apps Pack won't install

Hello,
I have just installed CyanogenMod 7 for the Barnes & Noble Nook Color :: V7.0.3 using ClockworkMod Recovery.
After installing CyanogenMod 7, I install the Google Apps addon version: gapps-gb-20110307. The installation goes smoothly, and I receive the "Installation Complete!" message before I remove the MicroSD card and reboot.
Upon reboot from ClockworkMod Recovery, I receive an "Installation Failed" screen that tells me to power on and off the device. I do so, and successfully boot into CyanogenMod7.
I immediately proceed to the Homescreen, where the only items are "Messaging" "Contacts" "Clock" "Email" "Camera" and "Gallery". I have no prompt to set up my Google Account or Timezone. Also, I do not have Market, but I can connect to my WiFi network.
Thank you for your help, it is appreciated. I am obviously a noob, and my apologies for stepping on any toes!

Wow! Looking at some of the questions neighboring mine and their lack of responses, I tend to doubt that mine is going to get answered, even over the long run. I thought this forum had active users, at least that is what the Registration Video said...6 million active users was it???

First of all, deep breath. It may not get answered right away, but typically the questions get answered.
First off, any particular reason you are running 7.0.3? If I recall, this includes the old kernel that has terrible battery life. I would recommend going to 7.1 found here.
I don't know which gapps goes with 7.0.3, but I would double check to make sure it was the right one. I'd still recommend upgrading to 7.1 stable.

Also, I personally recommend doing ROM and GAPPS in two steps... I have eliminated some of the problems I have seen myself by using that method.
1. Install ROM... boot it up... let it settle in.
2. Reboot into CWM and install GAPPS... boot it up... do your thing
Also remember... 4 hours isn't a real long time to wait before posting a second post like you did... especially on a Sunday evening... This is a forum... not an immediate feedback application.

My apologies for my impatience. I did not mean to sound so callous, but after rereading my comment, I realize how abrupt it was.
Also, I remember the site introduction mentioning clicking on the thanks meter as a piece of site etiquette. How do I do that?

After following your advice, I am still having the same problem: not able to use the Android Marketplace as the item is not on my Homescreen, and the Google Apps are not installing.
I took biohazrd's advice, and I upgraded to 7.1 stable.
I also took DizzyDen's advice and installed CyanogenMod 7.1, reboot, let it settle, powered off, booted into Clockwork and installed the google apps pack (gapps-gb-20110828-signed), then rebooted again.
Still, I have no Android Marketplace.
As I stated in my previous post, I am a newbie, and I don't know what I am talking about, but off the top of my head, I have a feeling as if the google apps pack that I used (gapps-gb-20110828-signed) is not the right one. Could this hold any water?
Also, I don't know if it makes any difference, but I bought my Nook in December 2011 and it is a refurbished model. Because I purchased it in 2011, I updated the partitioning scheme using (repartition1GBdata-v1) and (reformatData-v1).
Thanks again, I appreciate the help!

Littlefatman said:
After following your advice, I am still having the same problem: not able to use the Android Marketplace as the item is not on my Homescreen, and the Google Apps are not installing.
I took biohazrd's advice, and I upgraded to 7.1 stable.
I also took DizzyDen's advice and installed CyanogenMod 7.1, reboot, let it settle, powered off, booted into Clockwork and installed the google apps pack (gapps-gb-20110828-signed), then rebooted again.
Still, I have no Android Marketplace.
As I stated in my previous post, I am a newbie, and I don't know what I am talking about, but off the top of my head, I have a feeling as if the google apps pack that I used (gapps-gb-20110828-signed) is not the right one. Could this hold any water?
Also, I don't know if it makes any difference, but I bought my Nook in December 2011 and it is a refurbished model. Because I purchased it in 2011, I updated the partitioning scheme using (repartition1GBdata-v1) and (reformatData-v1).
Thanks again, I appreciate the help!
Click to expand...
Click to collapse
If it isn't on the Homescreen, did you check by open App Drawer?

Thanks for the reply Votinh.
I did not find the Marketplace in the App Drawer. My app drawer currently contains:
Browser, Calculator, Calendar, Camera, Clock, Contacts, Dev Tools, Downloads, DSPManager, Email, File Manager, Gallery, Messaging, Music, Phone, ROM Manager, Search, Settings, Sound Recorder, Spare Parts, Superuser, Terminal Emulator, Theme, Chooser, Videos and Voice Dialer.
I was having a look around and figured out how to look at the Internal storage and found something called Market Apps Installer version 1.1. I click on it, but it offers few options to fiddle with and seemingly no way to access the Android Marketplace.
Again, thanks for your help, I truly do appreciate it!

If it doesn't work as expect, I guess you have to list step by step what you have done up to that point, that may help us pin point where and what you did wrong.
Also, pls clearly indicate where you run the ROM from.

Thanks again for your help, Votinh.
votinh said:
Also, pls clearly indicate where you run the ROM from.
Click to expand...
Click to collapse
I am not sure what you mean. Where can I possibly run the ROM from (what are the possible answers)? I would assume that I could run it only from the SD card. Sorry for being a newbie!
I will list step by step all of my actions and detail them in the response. Maybe, I will go through the whole installation process again and mark down everything that transpires.

Also, what do you think of my theory? That I am downloading and installing the wrong gapps pack?

Littlefatman said:
Also, what do you think of my theory? That I am downloading and installing the wrong gapps pack?
Click to expand...
Click to collapse
gapps-gb-201111028-signed.zip is still on the CM wiki as the latest version... did you verify MD5 checksum and ensure you didn't have a bad download?

Littlefatman said:
Thanks again for your help, Votinh.
I am not sure what you mean. Where can I possibly run the ROM from (what are the possible answers)? I would assume that I could run it only from the SD card. Sorry for being a newbie!
I will list step by step all of my actions and detail them in the response. Maybe, I will go through the whole installation process again and mark down everything that transpires.
Click to expand...
Click to collapse
In here, xda NC forum, you will frequently see the term "eMMC" and "uSD"
eMMC refers to the internal memory of the device, as currently where the B&N stock ROM resides while uSD is the external card where we can put the custom ROMs such CM7/9 in and run from there.
Depends on which method you choose to use, different procedures/instructions needed.
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Littlefatman said:
Also, what do you think of my theory? That I am downloading and installing the wrong gapps pack?
Click to expand...
Click to collapse
As for your theory, I and we assume that you have installed CORRECTLY and if it isn't working as expect, then we need to know step-by-step how you did.
Everything is possible from bad zip to bad card.

My apologies for the delay in my reply. It has been a hectic week+end.
did you verify MD5 checksum and ensure you didn't have a bad download?
Click to expand...
Click to collapse
I am ashamed to say it, but I do not know how to verify a checksum to ensure the intergrity of a download. Although, I did download the gapps file twice, once each on different computers, copied it to the SD card and attempted to update. Is it possible that I could have gotten 2 bad downloads on 2 different PCs?

I have gone back and redone every bit of my CyanogenMod and Google apps installation on my Nook Color. I have taken notes on it and below is my step by step description of what I have done and observed. My apologies for the book, but I wanted to be as thorough as I could. Thanks for your help and I would appreciate and advice that can help me resolve this unfortunate situation.
1. Downloaded ClockworkModRecovery (2gb_clockwork-0.7.tar.gz) from http://code.google.com/p/monster-rootpack/downloads/detail?name=2gb_clockwork-0.7.tar.gz&can=2&q=
2. Downloaded CyanogenMod 7.1 (update-cm-7.1.0-encore-signed.zip) from here http://download.cyanogenmod.com/?type=stable&device=encore
3. Downloaded Google Apps (gapps-gb-20110828-signed) from here http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
4. Downloaded Win32DiskImager (win32diskimager-binary) from here https://launchpad.net/win32-image-writer/+download
5. Extracted Win32DiskImager files to a folder on desktop
6. Decompressed and Extracted ClockworkModRecovery to Desktop (this took longer than I expected, the extraction strangely taking 5 minutes)
7. Start up Win32 DiskImager and receive the following File Error message: An error occurred while accessing the device. This usually means something is currently accessing the device; please close all applications and try again. Error 1 Incorrect Function.
8. The File Error message displays itself 3 times. I click OK three times, and then the Win32 Application opens, and I continue with my process.
9. Use Win32 DiskImager to write ClockworkMod onto my MicroSD card. The MicroSD card is a 1 year old, 2GB Transcend MicroSD Card. I use an Kingmax MicroSD card adapter to plug the card into my Computer’s SD card slot.
10. Copy the CyanogenMod 7.1 file and the Gapps 20110828 file to the MicroSD card.
11. Eject the MicroSD card from the PC, insert it into my Nook, and power on.
12. Boot into ClockwordMod Recovery, I go to Mounts and Storage, click on Format System and confirm YES. Next, I format Data and Cache.
13. NOTE: Previously, I was receiving an "Error: can't format /data" error as my newer Nook Color had a different partitioning scheme. I used ‘reformatData-v1’ and ‘repartition1GBdata-v1’ to remedy this when I first attempted to install CyanogenMod. It seems to have gone off without a hitch.
14. I then go to ‘install zip from sdcard’ , the choose ‘choose zip from SD card’ and select the Cyanogenmod 7.1 zip. It opens and installs.
15. After the install completes, I remove the SD card and reboot the Nook.
16. Upon reeboot, I get a Cyanogen loading screen for a few seconds, followed by an error screen that says Install Failed with a large red and white exclamation mark over a Nook clip art.
17. The Nook powers off after a few seconds. I then power on again and sucesssfully boot into Cyanogenmod. I do not have the Marketplace app at this point.
18. I power off, replace the SD card, and boot into Clockworkmod.
19. I choose ‘install zip from sdcard’ and then ‘choose zip from SDcard’ and the gapps zip. I confirm YES and install the gapps zip.
20. I remove the SD card and reboot the system. I receive the exact same ‘Install Failed’ error screen with the red and white exclamation mark over a nook clip art.
21. After a few seconds the nook powers off after the error screen. I power on again and boot into CyanogenMod.
22. There is no Marketplace app on the homescreen or in the App Drawer, leaving me with the same initial problem
Thank you for everything!

I don't think Market will show until you have registered with google. There is a setup wizard or one time provisioning process to go through. That may be the thing that is failing when you first boot. Not sure how to get you back on track.
Sent from my NookColor using Tapatalk

Re: Google Apps Not Installing
Hi,
After you install CM 7.1, Google Apps, and reboot (hard power off and cold boot - the first boot will fail), look for the Google Talk app in your App Drawer and log in to it with your Google credentials. That should spawn the installation of the rest of the Google Apps, including the Android Marketplace.
Also, strangely enough, when installing my first app from the Market, I had to install it with the device physically in landscape mode, as the installation failed when the device was being held in portrait orientation. This seemed to clear up after the first app was installed.
I stumbled across this thread tonight, as I was searching for a solution to this exact problem while updating a friends Nook Color to CM 7.1. This did the trick for me.
Good luck!
Frank

Thank you Frank! I am going to finish up my current task then break out the Nook and cross my fingers that this will work! I will let you know!

I, too, am having problems
I don't mean to thread-jack, but I am also having problems with gapps.
Following this thread: http://forum.xda-developers.com/showthread.php?t=1000957
The version of CM7 I placed on my card is "cm_encore_full-253.zip". The steps all the way through putting that on the card, putting that in the Nook, booting, it all worked fine. I DID notice the line that said something along the lines of looking for the gapps installation, not finding it, and skipping that step.
I downloaded the Gapps ("gapps-gb-20110828-signed.zip") onto my computer. I shut off my NC, took out the SD card, and went to put it into my computer. Lo and behold, my computer can't read the SD card. It tells me it needs to be formatted before it can be used.
Uh. How am I supposed to get anything on the sd card?! I can't even format it to start over - Windows fails to format it.
I tried plugging in my NC to my computer - I at least got the CM7SDCARD to open, but it doesn't appear to be everything (there's no "boot" folder there). I tried moving the zip file to just the main directory of what I saw, and booted into recovery mode, but nothing happened.
Any assistance would be appreciated!

U
caseystain said:
I don't mean to thread-jack, but I am also having problems with gapps.
Following this thread: http://forum.xda-developers.com/showthread.php?t=1000957
The version of CM7 I placed on my card is "cm_encore_full-253.zip". The steps all the way through putting that on the card, putting that in the Nook, booting, it all worked fine. I DID notice the line that said something along the lines of looking for the gapps installation, not finding it, and skipping that step.
I downloaded the Gapps ("gapps-gb-20110828-signed.zip") onto my computer. I shut off my NC, took out the SD card, and went to put it into my computer. Lo and behold, my computer can't read the SD card. It tells me it needs to be formatted before it can be used.
Uh. How am I supposed to get anything on the sd card?! I can't even format it to start over - Windows fails to format it.
I tried plugging in my NC to my computer - I at least got the CM7SDCARD to open, but it doesn't appear to be everything (there's no "boot" folder there). I tried moving the zip file to just the main directory of what I saw, and booted into recovery mode, but nothing happened.
Any assistance would be appreciated!
Click to expand...
Click to collapse
Look at my post here. It tells you how to make the boot partition show up in your system. In your case download the rar rev 1 and follow the directions (per edit 2) on how to manually put the file on your system.
http://forum.xda-developers.com/showthread.php?p=22858059
Edit: You sound like a newby, so in order to do this you need the program "root explorer" which you buy on the market. Very useful program for later use too.
If you don't feel like trying this, get a different card reader or computer to see if that helps reading the card.
Edit 2: Also look here for a more recent nightly that has a few bugs fixed. It was built in January and 253 was in November.
http://forum.xda-developers.com/showthread.php?p=23198390

[Q] MN5 (More noob English, please)

Just trying to work my way through GMPOWER's tutorial on rooting the Nook Color.
I have some REALLY basic questions that are probably covered in the instructions, but if it's NEW, which it is for anyone reading here...it's confusing:
For example,
1. What is meant by the bold, red warning........"You must do a complete wipe before installing this package." Does "wipe" mean FORMAT? If yes......format what? The NOOK? The SD card? Both?
2. In the video included in the tutorial, there's reference to an unZIPing program being required to 'uncork' the downloaded files. The narrator says to right click and unzip the files. (When I right click on my zipped files, the only command I see that MIGHT an unzip function is "Extract all". Is that an unzip program?)
3. The most 'complicated' process of all, (to me, anyway) the selecting of the files and unzipping them and "flashing" them (is that just another word for copying or installing?) is passed over so quickly and with the camera so far away from the screen in the video....it's very difficult to see and understand exactly what is happening. For example, at exactly 4:06 into the video, the narrator says to right click on the CWM file.....at which point, it looks like he actually LEFT clicks it and it opens to show TWO files.....and he then RIGHT clicks on one of them, but doesn't say what it's name is or what it should do.
Sorry to sound like a whiney noob......but, remember, only noobs are watching this; otherwise we wouldn't be watching it!
Can someone please elaborate on the click here.....now do this......then do that.......then you will see this......and now you have to do these? I'm sure I speak for more people than just myself when I ask this.
Thanks very much for any help.
Michael

Bultaco69 said:
Just trying to work my way through GMPOWER's tutorial on rooting the Nook Color.
I have some REALLY basic questions that are probably covered in the instructions, but if it's NEW, which it is for anyone reading here...it's confusing:
For example,
1. What is meant by the bold, red warning........"You must do a complete wipe before installing this package." Does "wipe" mean FORMAT? If yes......format what? The NOOK? The SD card? Both?
2. In the video included in the tutorial, there's reference to an unZIPing program being required to 'uncork' the downloaded files. The narrator says to right click and unzip the files. (When I right click on my zipped files, the only command I see that MIGHT an unzip function is "Extract all". Is that an unzip program?)
3. The most 'complicated' process of all, (to me, anyway) the selecting of the files and unzipping them and "flashing" them (is that just another word for copying or installing?) is passed over so quickly and with the camera so far away from the screen in the video....it's very difficult to see and understand exactly what is happening. For example, at exactly 4:06 into the video, the narrator says to right click on the CWM file.....at which point, it looks like he actually LEFT clicks it and it opens to show TWO files.....and he then RIGHT clicks on one of them, but doesn't say what it's name is or what it should do.
Sorry to sound like a whiney noob......but, remember, only noobs are watching this; otherwise we wouldn't be watching it!
Can someone please elaborate on the click here.....now do this......then do that.......then you will see this......and now you have to do these? I'm sure I speak for more people than just myself when I ask this.
Thanks very much for any help.
Michael
Click to expand...
Click to collapse
I'm running CM10 and have not seen the video you speak of... But I think I can help with some of what you're looking for.
1. Wipe and format are often used synonymously. For example wiping your system or data partition on your device is the same as formatting. If the video is talking about the SD card, the same philosophy applies. A formatted card is ideal before starting.
2. Again, unzip and extract are somewhat synonymous. What program they are likely referring to is 7zip. It's a powerful compression and decompression utility.
3. Flashing describes the process of installing a package(ROM, zip, etc...) from one media(SD in this case) and installing it to a normally read only media (the Nook's internal drive. Including the system and data partitions of the disk) This is usually done through a recovery program that starts up instead of the normal OS. In most cases it is Clockwork Mod recovery (CWM) or something very much like it.
Like I said, I haven't seem the video and never went the manual nooter route. I totally wiped stock nook and went the CyanogenMod route. So I can't comment on the video's vagueness in this case. Maybe another member has some insight on this.
Sent from my SPH-D700 using xda premium

Error while using Win32DiskImager
propjockey said:
I'm running CM10 and have not seen the video you speak of... But I think I can help with some of what you're looking for.
1. Wipe and format are often used synonymously. For example wiping your system or data partition on your device is the same as formatting. If the video is talking about the SD card, the same philosophy applies. A formatted card is ideal before starting.
2. Again, unzip and extract are somewhat synonymous. What program they are likely referring to is 7zip. It's a powerful compression and decompression utility.
3. Flashing describes the process of installing a package(ROM, zip, etc...) from one media(SD in this case) and installing it to a normally read only media (the Nook's internal drive. Including the system and data partitions of the disk) This is usually done through a recovery program that starts up instead of the normal OS. In most cases it is Clockwork Mod recovery (CWM) or something very much like it.
Like I said, I haven't seem the video and never went the manual nooter route. I totally wiped stock nook and went the CyanogenMod route. So I can't comment on the video's vagueness in this case. Maybe another member has some insight on this.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Hey, propjockey.....thanks for the 'patient' explanations.
I've made a little headway in terms of preparing to root my Nook Color.....but when I tried to use DiskImager....I got an error:....."An error occurred when attempting to lock the volume.
Error 5: Access is denied."
Anybody know what might have generated this? Or, what I should try next?
Thanks for any help, ladies and gentlemen!
Later,
Michael

Bultaco69 said:
Hey, propjockey.....thanks for the 'patient' explanations.
I've made a little headway in terms of preparing to root my Nook Color.....but when I tried to use DiskImager....I got an error:....."An error occurred when attempting to lock the volume.
Error 5: Access is denied."
Anybody know what might have generated this? Or, what I should try next?
Thanks for any help, ladies and gentlemen!
Later,
Michael
Click to expand...
Click to collapse
Yes, that means you have windows explorer looking at the drive. That locks it so it cannot be written to. Close windows explorer and try again.
Sent from my HD+ running CM10 on SD with XDA Premium

Still getting lock error
leapinlar said:
Yes, that means you have windows explorer looking at the drive. That locks it so it cannot be written to. Close windows explorer and try again.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
Thanks very much for the suggestion, leapinlar,.....but I'm still getting the Lock error even after making sure ALL windows of Explorer are closed (especially any for the SD drive).
Dumb question: I don't think either the text from GMPOWER or the video ever state WHERE the win32 diskimager and/or the clockwork-3.2.0.1 should be residing when these operations are taking place. I would ASSUME they're all supposed to be on the SD card....but I've been wrong before when assuming!!
Also, when I first tried this, I noticed I had downloaded (and possibly extracted) the win32diskimager-source.zip (SOURCE) version as opposed to the BINARY version. Should I start over? With a cleanly formatted SD? (my formatting took a long, long time when I initially did it.......not using the Quick method, as I think I saw advised somewhere.)
Thoughts? Thanks!
EDIT: Actually, I think I just answered PART of my question: when I tried it again (after formatting the SD and putting ALL three zipped files on the card) I got a new/different error:
"Image file cannot be located on the requested device." So, I guess that means that at least the "eyeballer" image file CANNOT be sitting on the SD card while you attempt to "write" it there. Yes? No?
Therefore....by the same token....is it safe/possible to run the Win32DiskImager from the SD card.....or should it ALSO be located somewhere else during this process??
ANOTHER EDIT: Tried removing the image file from the SD card, then running DiskImage and selecting the image file that I'd downloaded and unzipped to my hard drive. STILL got the "lock error". Getting frustrated. Most grateful for any suggestions/help. Please and Thanks

You definitely need the img file on your PC before you try to burn. Having it on SD and putting that location in the image box will definitely lock the card. Try again with nothing on the card and no other program running.
Sent with XDA Premium from my Nook HD+ running CM10 on SD

OK, leapinlar...you're my new GURU!!
leapinlar said:
You definitely need the img file on your PC before you try to burn. Having it on SD and putting that location in the image box will definitely lock the card. Try again with nothing on the card and no other program running.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
Thanks, buddy!
That was apparently my problem
I formatted the card back to being a virgin.....put NOTHING on it. Went to Win32 on my hard drive, launched it, found the eyeballer image on my HARD DRIVE and selected it to flash onto my card in the G-drive.
And away it went!!! Lovely! Just friggin lovely!!
Now, since instructions everywhere often seem to be devoid of these fine "details".......could you be so kind as to give me EXPLICIT directions on what to do next? (I'd hate to turn my Nook Color into a paperweight at this stage!)
The sequence of events (i.e. when the nook gets turned on/turned off/hooked up/ etc seem to be different in different places........I notice even the video from Acsyndicate TV, they insert a little apology in the corner saying they forgot to turn it on; DOH!! Also, I see elsewhere that the Nook should be connected by USB at some point during this process....and yet the guy in the video doesn't have a cable showing anywhere any time. WTF??)
Thanks tons for your help leapinlar.......I'm almost at the point of not buggin you any more!

Bultaco69 said:
Thanks, buddy!
That was apparently my problem
I formatted the card back to being a virgin.....put NOTHING on it. Went to Win32 on my hard drive, launched it, found the eyeballer image on my HARD DRIVE and selected it to flash onto my card in the G-drive.
And away it went!!! Lovely! Just friggin lovely!!
Now, since instructions everywhere often seem to be devoid of these fine "details".......could you be so kind as to give me EXPLICIT directions on what to do next? (I'd hate to turn my Nook Color into a paperweight at this stage!)
The sequence of events (i.e. when the nook gets turned on/turned off/hooked up/ etc seem to be different in different places........I notice even the video from Acsyndicate TV, they insert a little apology in the corner saying they forgot to turn it on; DOH!! Also, I see elsewhere that the Nook should be connected by USB at some point during this process....and yet the guy in the video doesn't have a cable showing anywhere any time. WTF??)
Thanks tons for your help leapinlar.......I'm almost at the point of not buggin you any more!
Click to expand...
Click to collapse
Just go back to Manual Nooter and follow his directions.
Sent from my BNTV600 using xda premium

"Sorry, there's not enough space to install this item."
leapinlar said:
Just go back to Manual Nooter and follow his directions.
Sent from my BNTV600 using xda premium
Click to expand...
Click to collapse
Installation/rooting successfully completed, but now unable to download any apps because of "Sorry there's not enough space......." error appearing for every attempted download.
Is there a secret.......let me rephrase that.......what IS the secret to deleting all the crap that must be in there taking up all the space?
I rooted a virtually STOCK Nook Color (1.4.3) using manualnooter-5.08.20.basic.block_updates.zip - and it appeared to be fine, but I'm assuming there's a routine that must be followed to either "turn on" the ability to download......or free up some space to download......new apps.....which, after all, is the only reason we root these things.......right?
Thanks for any/all info.
Michael

Bultaco69 said:
Installation/rooting successfully completed, but now unable to download any apps because of "Sorry there's not enough space......." error appearing for every attempted download.
Is there a secret.......let me rephrase that.......what IS the secret to deleting all the crap that must be in there taking up all the space?
I rooted a virtually STOCK Nook Color (1.4.3) using manualnooter-5.08.20.basic.block_updates.zip - and it appeared to be fine, but I'm assuming there's a routine that must be followed to either "turn on" the ability to download......or free up some space to download......new apps.....which, after all, is the only reason we root these things.......right?
Thanks for any/all info.
Michael
Click to expand...
Click to collapse
Go to settings/storage and see what it says about internal storage space. Tell us how much is left.
Sent with XDA Premium from my Nook HD+ running CM10 on SD

leapinlar said:
Go to settings/storage and see what it says about internal storage space. Tell us how much is left.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
B&N Content Storage Available 66%
3.35GB free of 5.09GB
Other Storage Available 20%
197MB free of 1.00GB

Bultaco69 said:
B&N Content Storage Available 66%
3.35GB free of 5.09GB
Other Storage Available 20%
197MB free of 1.00GB
Click to expand...
Click to collapse
You apparently have a lot of B&N stuff (apps, games, etc) installed (1.7 GB worth), but 3.35 GB should be plenty for installing more apps through Play Store. I don't know what your issue is.
Edit: You do not say, but I am assuming you meant downloading apps with Play Store. If you meant downloading some other way, like a browser, you need an sdcard to do that and you have not said how much room your SD card has.
Sent with XDA Premium from my Nook HD+ running CM10 on SD

leapinlar said:
You apparently have a lot of B&N stuff (apps, games, etc) installed (1.7 GB worth), but 3.35 GB should be plenty for installing more apps through Play Store. I don't know what your issue is.
Edit: You do not say, but I am assuming you meant downloading apps with Play Store. If you meant downloading some other way, like a browser, you need an sdcard to do that and you have not said how much room your SD card has.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
OK....good feedback....THANKS!
1. Yes, I mean to download using Play Store (which currently is labeled MARKET. Presumably it'll update itself and change its name to GOOGLE PLAY when we get the storage problem solved.......will it?
2. I have next to no previous apps or media (maybe 4 apps and 4 books and 3 magazines) downloaded to the NC......but, perhaps it doesn't take much to fill this puppy?
3. I don't even have an SD card in it at this point. I removed the one I used to do the rooting because it booted to it when I started up the Nook this AM........and I assumed that was a bad thing.....or, at least unnecessary.
Should I erase the "rooting SD card"........or "keep it in a safe place" and use a new one for downloading/storing apps and media?
Thanks,
Mike

Bultaco69 said:
OK....good feedback....THANKS!
1. Yes, I mean to download using Play Store (which currently is labeled MARKET. Presumably it'll update itself and change its name to GOOGLE PLAY when we get the storage problem solved.......will it?
2. I have next to no previous apps or media (maybe 4 apps and 4 books and 3 magazines) downloaded to the NC......but, perhaps it doesn't take much to fill this puppy?
3. I don't even have an SD card in it at this point. I removed the one I used to do the rooting because it booted to it when I started up the Nook this AM........and I assumed that was a bad thing.....or, at least unnecessary.
Should I erase the "rooting SD card"........or "keep it in a safe place" and use a new one for downloading/storing apps and media?
Thanks,
Mike
Click to expand...
Click to collapse
1. It should have changed itself immediately. That may be indicative of the problem.
2. Are any of the books kids interactive books? They take a lot of space.
3. If you did not make a backup with the CWM card, and you don't plan to restore the backup in the future, then reformat the card to use as a normal SD. But I recommend you do the backup and keep the card as CWM. Then get a new one.
Sent from my Galaxy Tab running Tapatalk

leapinlar said:
1. It should have changed itself immediately. That may be indicative of the problem.
2. Are any of the books kids interactive books? They take a lot of space.
3. If you did not make a backup with the CWM card, and you don't plan to restore the backup in the future, then reformat the card to use as a normal SD. But I recommend you do the backup and keep the card as CWM. Then get a new one.
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
1. Hmmmm. Hope THAT'S not a disaster. "Market" opens Ok and I can see hundreds (maybe thousands) of apps. But, I've used the search utility and searched for "Google Play".........."Google"..........and even "Market"........and no Google Play comes up in the search results. Shouldn't it?
2. No kids in the familly; no 'interactive' stuff of any kind that I know of....a couple of novels, couple of magazines.....sodoku, Evernote, YouTube, calculator, a little drum machine, flashlight.......mirror......holy crap, looks like wifey's been active after all!!
3. I DIDN'T make a backup with (of ?) the CWM card. Back up of what, exactly......the old disk image (operating system? Pardon my noobiness). Is it too late to make any required copies/backup? I just now copied the contents of the "rooting SD card" into a folder on my laptop's hard drive.......but I'm not sure if that's what you're talking about.
m

Bultaco69 said:
1. Hmmmm. Hope THAT'S not a disaster. "Market" opens Ok and I can see hundreds (maybe thousands) of apps. But, I've used the search utility and searched for "Google Play".........."Google"..........and even "Market"........and no Google Play comes up in the search results. Shouldn't it?
2. No kids in the familly; no 'interactive' stuff of any kind that I know of....a couple of novels, couple of magazines.....sodoku, Evernote, YouTube, calculator, a little drum machine, flashlight.......mirror......holy crap, looks like wifey's been active after all!!
3. I DIDN'T make a backup with (of ?) the CWM card. Back up of what, exactly......the old disk image (operating system? Pardon my noobiness). Is it too late to make any required copies/backup? I just now copied the contents of the "rooting SD card" into a folder on my laptop's hard drive.......but I'm not sure if that's what you're talking about.
m
Click to expand...
Click to collapse
1. That may be the problem. It should update itself, but is not critical. The older versions of market temporarily stored their downloads on a separate partition named cache. That may be full from earlier downloads. Boot to CWM and there is an option to wipe cache. Do that. Then try to use market again.
3. The CWM card is capable of making what is called a nandroid backup. It backs up your entire operating system to SD so that if in making future mods, you make a mistake, you can restore your operating system to the way it was before you started making mods. It is too late to do that for you, but you can still backup what you have now.
Sent from my Galaxy Tab running Tapatalk

leapinlar said:
1. That may be the problem. It should update itself, but is not critical. The older versions of market temporarily stored their downloads on a separate partition named cache. That may be full from earlier downloads. Boot to CWM and there is an option to wipe cache. Do that. Then try to use market again.
3. The CWM card is capable of making what is called a nandroid backup. It backs up your entire operating system to SD so that if in making future mods, you make a mistake, you can restore your operating system to the way it was before you started making mods. It is too late to do that for you, but you can still backup what you have now.
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
I'll give that a try......booting with CWM and wiping the cache. (Out of town on family 'duties' and left the nook at home but will report back on Monday sometime.)
Thanks for "babysitting" me, buddy! Appreciate it. Have a great weekend. Later, Mike.

nst glowlight starting up stops every time

I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?

sinlog said:
I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?
Click to expand...
Click to collapse
That backup is too large, I think. Should be more in the neighborhood of 250 MB? Have you tried the factory re-image where you just see the booting up screen and then hold down the two bottom hardware buttons until you get a prompt?
It's difficult--but not impossible--to damage the factory image unless you've been messing with the partitions. If that method does not get you there, consider making a NookManager card and trying to access the re-image routine from its menu.

Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.

sinlog said:
Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.
Click to expand...
Click to collapse
5 seconds is not enough time for NookManager to correctly make a backup. And, backups can only be seen on the card if you connect your NSTG to your PC while NookManager is running. Otherwise the partition is invisible.
It's hard to know since I have no experience with the NSTG. If it were an NST I would suggest that you perform the region change flash, but it's not clear if that will remove your light function or, indeed, if the flash is deep enough to rewrite the areas of your device that appear to be preventing boot. AFAIK there are no ROM images for the NSTG available. But there might be. Somewhere.
I guess if you have exhausted all the possibilities, rather than trashing the device I would try the region change (just flash the US firmware again--I assume that's what's on there already). It may or may not preserve the glowlight capability, but it might at least produce a functioning e-reader. But only as a last resort.
Edit: Hmm.... seems like I've been down this winding road before: https://forum.xda-developers.com/showpost.php?p=72551413&postcount=57
But I emphasize that this process worked for a plain NST, not the NSTG, so it is an absolute last resort (and might not work anyway because you could have a completely different situation). Next thing is to look at the innards of the 1.1 updater and see if Glowlight updates could be substituted...

O.K. So here is a thread that contains a link to an NSTG image and the instructions to write to your device (read down in the thread).
https://forum.xda-developers.com/showthread.php?t=2608815
What "may" happen: your device could end up with a mismatched serial number and or MAC address depending on how this image was made. There is information on this forum for correcting the MAC address. Just a disclaimer. I don't know. IF this is successful, you can then do a manual update to 1.2.2 and then root with the updated NookManager. I've checked the link to the image and it is still good. I got a file that is about 245 MB--seems about right. Presumably you use the image in place of your backup in the restoring process described in the thread.

I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?

sinlog said:
I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?
Click to expand...
Click to collapse
Oy.
I didn't think you would act so rashly with all my disclaimers. Well, it's done. I actually don't think the MAC address is a big deal unless you begin to have issues.
Did you actually manage to register? If so then the serial number must not currently be in use and the change you effected was deep enough to pass muster. If not....well battery life is said to be shorter for devices that have skipped registration.
Correcting the MAC address is described (sort of) here: https://forum.xda-developers.com/showthread.php?t=1483600
As far as I can guess it involves editing a hex file. Doable, but maybe not needed. There is no way to correct the serial number. It is heavily encrypted with private keys. Again, if you managed to register then this is all moot.
How are you judging lack of internet connectivity?

I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2

sinlog said:
I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2
Click to expand...
Click to collapse
You didn't answer my question about connectivity. Are you not able to make a connection? With only the stock device there is nothing to connect to other than B&N. What does it say about "Owner" in the Settings?
Yes, you should root. Be sure to use the NookManager update or it won't work.
Before we even think about the MAC address issue you need root access and some way to tell if you actually have an internet connection. That means some kind of functioning browser, etc.
Do you still have that weird backup? If so, keep it safe somewhere. You may want that someday.

I tried to download a book and I got this : Unable to download, Internal error...
I can ping the nook from the computer.
I will look into rooting the device in 2 or 3 hours and then post again. I suppose this is what you're referring to :
https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048
Thank you for your patience with me.

sinlog said:
I tried to download a book and I got this : Unable to download, Internal error...
Click to expand...
Click to collapse
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?

nmyshkin said:
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?
Click to expand...
Click to collapse
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.

sinlog said:
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.
Click to expand...
Click to collapse
Hmm... I'm surprised there are any books populating that section at all since the device is not registered. In any case, that is no test of connectivity since without registration the NSTG will spit out all kinds of generic messages about connections and failures if you attempt anything that requires access of B&N servers--like buying/downloading a book (which you can't do unless you are registered).

Rooted with nookManager updated. Opera mobile needs to be reinstalled. I can connect to the computer using es file explorer, so wifi is ok. BUT I can't use nookManager because I can't read the icon labels. I'll restore the backup tomorrow and I will try another rooting method. There are 2 more, I think : tiny and glownooter. Are there others ?

sinlog said:
BUT I can't use nookManager because I can't read the icon labels.
Click to expand...
Click to collapse
? Do you mean ADW Launcher? You can fix the icon label issue in the Settings. As I recall the default font color is white. That needs to be changed to black. The size can also be changed. Depending on what icon style you pick the label will either be on one line or, if longer, on two. LOTS of Settings in ADW. Don't write it off without spending some time working with it.

Sorry, I used glownooter. It's a lot like touchnooter, with which I am familiar. I still have to sign in to my google account and to install opera mobile. I'll be back when finished.

Opera mobile is installed and working. I still can't sign in to google but I can use yalp store and that's good. Thanks again, nmyshkin, you saved my nook glowlight.