[Q] magic totally bricked - myTouch 3G, Magic General

hello everyone.
i have a big problem! i take a friends 32a magic to flash a costum rom and after i update the radio and tha hboot the phone stuck in vodafone shplash screen. i had access in recovery mod and hboot but after the upgrade everything is dead. i install htc sync i have the sdk tools. power+home/back/volume down shows only vodafone logo.works only the blue led power+trackball. the phone is charging normaly. when is off and charging my pc shows something is connected but dont know what. i read about jtag but is smth difficult. the phone is not mine so i dont want to pay a 5y old phone. any advice? thank you and i hope to undarstand my problem.

Anyone please give an answer.
Sent from my E10i using xda app-developers app

JTAG
Yep answer is JTAG my friend

Thanks
Sent from my E10i using xda app-developers app

service man!or use jtag!

Related

Removing Vodafone sign at start up on fast boot??

Hi, just a quickie, is there anyway to remove the network logo on start up on dhd, cos it doesn't seem to be a fast boot with the logo popping up??? It's on Vodafone and I've had it about 3 weeks, thanks all
Sent from my Desire HD using XDA App
dazza_84 said:
Hi, just a quickie, is there anyway to remove the network logo on start up on dhd, cos it doesn't seem to be a fast boot with the logo popping up??? It's on Vodafone and I've had it about 3 weeks, thanks all
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I had that, i rooted and unbranded and it went, it's because you are on branded firmware it will always come up do you have vodafone 360 apps aswell?
If you root & apply ENG S-OFF you can flash a new splash screen. You can even make your own custom one if you like.
Yeah I have the 360 app and music app and some other stuff, could someone please point me in the right direction to root + debrand desire hd please many thanks
Sent from my Desire HD using XDA App
Install a custom ROM aswell?
Sent from a desire HD via pigeon

Jtag mt3g 1.2

I have a bricked mytouch 3g 1.2 and I don't have the tools or knowledge and experience to jtag it. when you turn it on it shows a htc magic splash screen and that's it. No fastboot. No recovery. Is there anyone here who could jtag it for me? ill pay anyone who can do this. please pm me if you can help
Sent from my Gingerbread on Sapphire using XDA Premium App
Bump from the dead. Anyone?

Wifi suddenly wont turn on.

So i've s-off'ed my Desire Z and been running a few different custom roms for the last couple of months.. Then suddenly yesterday Wifi wont turn on anymore (running CoreDroid). At first i thought it was the rom, so i flashed another rom (DoubleShot rom) but problem is still there !
When i go to settings to turn it on it just sits there for about 15 seconds.. After that i get the message "error" and then its turned off again
I thought i have read about this somewhere here, but i cant find the thread
Does anyone have suggestions to how i can fix it?
What i find really wierd is that since this started the part in the initial setup (after a rom is flashed) where you are to choose which wifi network to connect to .. That part is just not showing..
Try flashing a new radio
Sent from my HTC Desire using XDA App
when stuff like this happens i go back to stock and start over just to be sure
Sent from my HTC Vision using XDA Premium App
shockem said:
Try flashing a new radio
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I have problems doing this. I need to first flash the Eng hboot, but for some reason the links in the wiki to the proper usb drivers for adb, is dead and i cant seem to find them anywhere else..
smokeuout said:
when stuff like this happens i go back to stock and start over just to be sure
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
If i install the stock rom again would that also mean to reflash the radio ?
Sorry I don't have the Download links as I don't own this phone. Ussually the drivers can be installed by installing the Android sdk as well as HTC sync. And yes going back to stock meaning a ruu will reflash the radio. Good luck
Sent from my HTC Desire using XDA App
shockem said:
Sorry I don't have the Download links as I don't own this phone. Ussually the drivers can be installed by installing the Android sdk as well as HTC sync. And yes going back to stock meaning a ruu will reflash the radio. Good luck
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Well got my stock 1.34 rom installed through the bootloader.. But wifi still wont turn on.. Guess its damaged then

I can't turn on my GT540!!!

I don't know why, but I can't turn on my LG GT540! Even when I try to charge it, I don't see LG logo. What do I have to do to repair it??? (
Please help!!!
Check the FAQ sticky in the gt540 Dev forum go to the one named what to do if I brick my phone should be the third link down(you will have to run the kudzu then flash any rom)
Sent from my GT540RR using XDA App
If you think on this, it didn't help. My phone is totaly dead.
Sorry I'm at a loss then:-\
Sent from my GT540RR using XDA App
I will sent it to LG service. I hope they will fix it..
Bricked
My friend's phone got bricked after a failed update. He sent it to LG and he got a new one back.
jhonnyx1000 said:
My friend's phone got bricked after a failed update. He sent it to LG and he got a new one back.
Click to expand...
Click to collapse
New one???

spl problem

hello people i have a htc hd2 that is on stock with latest radio update and the 3.03 spl
i am trying to put the hard spl on it but it always stays on serial and wont change to usb
in boot loader
can any on help please
Sent from my HTC HD2 using xda premium Gold
dont worry found the fix
Sent from my HTC HD2 using xda premium
can you please mention the Fix...i am trying to solve this issue....
Thank you Very much

Categories

Resources