Hello I found several threads with a lot of question how unock 1st gen HTC with Mango update and SPL 5.1x without special downgrades or Goldcard. Here is complete manual. Unlock is very easy.
Description for Mozart, if you have another one look here http://forum.xda-developers.com/showthread.php?t=1413694
1. Download ansar perfect ROM for Mozart 5.1x SLSPL from here
turbobit.net/n5ho7wnbe0yc.html
Make sure that USB sync cable is connected to the computer. The standby and hibernation modes are disabled on the computer. All running applications on the computer have been closed. Power off your phone and then power on with holding volume down button. Wait for insatllation ActiveSync drivers and wait for establish connection. On display you will see change from serial to USB. Make sure that you have SPL 5.1x (not another one).
Extract archive and run ROM update utility, follow all important steps (manual in readme file) and start flashing procedure. A progress bar will run through the screen during the update process. !!!Dont unplug or power off phone until finish!!!
After finish your phone restart back to ActiveSync and you will see new 1.28 SPL on your screen.
2. Now you must flash you phone with standard downgraded 1.28 SPL unlocked ROM, here is for Europe HTC.
turbobit.net/4z4da6jgily0.html
Run ROM update utility as in 1.
After finish you have standard 1.28 Rom. Now is time for RSPL/HSPL
3. Download DFT RSPL/HSPL here
turbobit.net/jt7ao4qwwxcz.html
Restart your phone with holding volume down button to ActiveSync mode. Run RSPL (note, you must choice 1.28 and above SPL, for example 1.32)
After restart you can make HSPL unlock if you wish. HSPL is permanent unlock. RSPL is unlock to next restart or power off phone.
4. After HSPL or RSPL unlock, you can flash you ROM for example with perfect Dynamics 2.0 (WP 7.8) ROM or Deepshining ROM with 8835 update, or another one. Here you have both:
Dynamics 2.0 for Mozart Eastern languages
turbobit.net/aham1w79bqr9.html
Dynamics 2.0 for Mozart Western languages
turbobit.net/7hjvqfnorel9.html
Deepshining ROM v6.0 with 24 languages and 8835 update
turbobit.net/9yevsu2qfeho.html
saixx said:
Hello I found several threads with a lot of question how unock 1st gen HTC with Mango update and SPL 5.1x without special downgrades or Goldcard. Here is complete manual. Unlock is very easy.
Description for Mozart, if you have another one look here http://forum.xda-developers.com/showthread.php?t=1413694
1. Download ansar perfect ROM for Mozart 5.1x SLSPL from here
turbobit.net/n5ho7wnbe0yc.html
Make sure that USB sync cable is connected to the computer. The standby and hibernation modes are disabled on the computer. All running applications on the computer have been closed. Power off your phone and then power on with holding volume down button. Wait for insatllation ActiveSync drivers and wait for establish connection. On display you will see change from serial to USB. Make sure that you have SPL 5.1x (not another one).
Extract archive and run ROM update utility, follow all important steps (manual in readme file) and start flashing procedure. A progress bar will run through the screen during the update process. !!!Dont unplug or power off phone until finish!!!
After finish your phone restart back to ActiveSync and you will see new 1.28 SPL on your screen.
2. Now you must flash you phone with standard downgraded 1.28 SPL unlocked ROM, here is for Europe HTC.
turbobit.net/4z4da6jgily0.html
Run ROM update utility as in 1.
After finish you have standard 1.28 Rom. Now is time for RSPL/HSPL
3. Download DFT RSPL/HSPL here
turbobit.net/jt7ao4qwwxcz.html
Restart your phone with holding volume down button to ActiveSync mode. Run RSPL (note, you must choice 1.28 and above SPL, for example 1.32)
After restart you can make HSPL unlock if you wish. HSPL is permanent unlock. RSPL is unlock to next restart or power off phone.
4. After HSPL or RSPL unlock, you can flash you ROM for example with perfect Dynamics 2.0 (WP 7.8) ROM or Deepshining ROM with 8835 update, or another one. Here you have both:
Dynamics 2.0 for Mozart Eastern languages
turbobit.net/aham1w79bqr9.html
Dynamics 2.0 for Mozart Western languages
turbobit.net/7hjvqfnorel9.html
Deepshining ROM v6.0 with 24 languages and 8835 update
turbobit.net/9yevsu2qfeho.html
Click to expand...
Click to collapse
Thank you for this detail. You seem like your job might be a Technical Author? Your instructions are very clear.
I'll try this now (I'll let you know how I get on Gizmo!)
---------- Post added at 10:17 PM ---------- Previous post was at 10:08 PM ----------
UPDATE:
Links 1 and 2 don't work
dervbas said:
Thank you for this detail. You seem like your job might be a Technical Author? Your instructions are very clear.
I'll try this now (I'll let you know how I get on Gizmo!)
---------- Post added at 10:17 PM ---------- Previous post was at 10:08 PM ----------
UPDATE:
Links 1 and 2 don't work
Click to expand...
Click to collapse
Reuploaded
turbobit.net/h9siqqgioaoh.html
link 2 work like a charm
Thank you. Downloading link 2 (219 MB) now and link 1 appears to be OK for download too.
I follow you guide installing "RUU_Mozart_HTC_Europe_5.11.401.01_SLSPL_Signed_by_ansar".
When it finished the phone reboot in normal boot, shut down and the SPL is 5.11 (before was 5.12)
edit
I try to delete the "_1.28" from this file "RUU_signed.nbh_1.28" and works
Just found that this won't work for my phone because it was bought from Orange UK. Guessing this first ROM isn't compatible then.
hello guys !
i ve got problem, i can't downgrade rom and spl
i haver htc mozart firmware 2250.21.51301.401
SPL 5.13.2250.1
in bootloader mode it change from "serial" to usb i ve installed Zune,SDK WP7,and windows 7 say all drivers are ok and when i starting RUU and start upgrading then show 0% Mozart restarts and it says error in RUU Error{226]: Flash write
Activesync? can't install it on windows 7;/ so only way is do it on windows xp?
cuz on mine 2nd cpu i got windows xp and activesync don't see mine mozart;/
olsenoz said:
hello guys !
i ve got problem, i can't downgrade rom and spl
i haver htc mozart firmware 2250.21.51301.401
SPL 5.13.2250.1
in bootloader mode it change from "serial" to usb i ve installed Zune,SDK WP7,and windows 7 say all drivers are ok and when i starting RUU and start upgrading then show 0% Mozart restarts and it says error in RUU Error{226]: Flash write
Activesync? can't install it on windows 7;/ so only way is do it on windows xp?
cuz on mine 2nd cpu i got windows xp and activesync don't see mine mozart;/
Click to expand...
Click to collapse
Try WMDC for 7
I am having trouble downloading through the given source. Can any kind soul please upload to another mirror for all the turbo net link? Thank You.
Please help anybody!
saixx said:
Hello I found several threads with a lot of question how unock 1st gen HTC with Mango update and SPL 5.1x without special downgrades or Goldcard. Here is complete manual. Unlock is very easy.
Description for Mozart, if you have another one look here http://forum.xda-developers.com/showthread.php?t=1413694
1. Download ansar perfect ROM for Mozart 5.1x SLSPL from here
turbobit.net/n5ho7wnbe0yc.html
Make sure that USB sync cable is connected to the computer. The standby and hibernation modes are disabled on the computer. All running applications on the computer have been closed. Power off your phone and then power on with holding volume down button. Wait for insatllation ActiveSync drivers and wait for establish connection. On display you will see change from serial to USB. Make sure that you have SPL 5.1x (not another one).
Extract archive and run ROM update utility, follow all important steps (manual in readme file) and start flashing procedure. A progress bar will run through the screen during the update process. !!!Dont unplug or power off phone until finish!!!
After finish your phone restart back to ActiveSync and you will see new 1.28 SPL on your screen.
2. Now you must flash you phone with standard downgraded 1.28 SPL unlocked ROM, here is for Europe HTC.
turbobit.net/4z4da6jgily0.html
Run ROM update utility as in 1.
After finish you have standard 1.28 Rom. Now is time for RSPL/HSPL
3. Download DFT RSPL/HSPL here
turbobit.net/jt7ao4qwwxcz.html
Restart your phone with holding volume down button to ActiveSync mode. Run RSPL (note, you must choice 1.28 and above SPL, for example 1.32)
After restart you can make HSPL unlock if you wish. HSPL is permanent unlock. RSPL is unlock to next restart or power off phone.
4. After HSPL or RSPL unlock, you can flash you ROM for example with perfect Dynamics 2.0 (WP 7.8) ROM or Deepshining ROM with 8835 update, or another one. Here you have both:
Dynamics 2.0 for Mozart Eastern languages
turbobit.net/aham1w79bqr9.html
Dynamics 2.0 for Mozart Western languages
turbobit.net/7hjvqfnorel9.html
Deepshining ROM v6.0 with 24 languages and 8835 update
turbobit.net/9yevsu2qfeho.html
Click to expand...
Click to collapse
I'm getting error 226 (Flash Write) when flashing the first rom, I tried any thing and google it but none are as same as my problem!
I have the Telestra Mozart, tried even the official branded rom but no result please help!
Another mirror pls
yes ! another ^^ please
SLSPL by ansar:
http://www.mediafire.com/download.php?5k5fblbrw9j6q1c
Pass: windowsmania.pl
ROM 1.28.2250.4 after SLSPL
http://d-h.st/tHp
RSPL/HSPL
http://htcfanboys.com/download/cotulla/?action=view&file=2942
please some help
As hard as i try i can't flash anything on my trophy When boot into tricolor screen the "serial"doesn't appear on the lower part of the screen.An other friend suggest that i should use Goldcard as my phone is half-bricked.I find this solution exremely dificult!!Has any friend any other advice??
I desperatewly need to flash a 7.8 rom on my phone!!!
Mazelost half bricked try y gold card method
Sent from my HTC 7 Mozart WP7.8 using XDA Windows Phone 7 App
Just a short question
Hi,
I get the invalid vender Id 294 error - i suppose this is because i've not correctly debranded my phone by now. Is there any method to debrand my T-Mobile Austria SPL 5.12 phone and get a custom Rom running?
Thanks for your help!
saw
saw45 said:
Hi,
I get the invalid vender Id 294 error - i suppose this is because i've not correctly debranded my phone by now. Is there any method to debrand my T-Mobile Austria SPL 5.12 phone and get a custom Rom running?
Thanks for your help!
saw
Click to expand...
Click to collapse
Hello, did you find some useful info?
Thanks
This method is only for device with cv401. If u are other CV u need a Y-Cable and flash rom in USB Host Mode
boneszbo said:
This method is only for device with cv401. If u are other CV u need a Y-Cable and flash rom in USB Host Mode
Click to expand...
Click to collapse
Thank you for info boneszbo.
This is what i was afraid of. Well let's wait for cables to arrive and just try it than
Download the official rom for T-mobile Australia with the low order boat loader up to 3.xx and you wont get any erro
---------- Post added at 10:35 AM ---------- Previous post was at 10:35 AM ----------
adeebulrehman said:
Download the official rom for T-mobile Australia with the low order boat loader up to 3.xx and you wont get any erro
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2112687
Related
Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx
hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.
Thank you for the answer but it don't work...
Nobody can help me ?
Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).
nope ...
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...
When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.
Did you try it on other PC?
2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.
definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.
Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you
I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.
chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip
Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now
Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend
I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?
Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really
hi,
I have ROM 1.66(Swedish ROM), Radio - 2.06,SPL-1.66. I have tried to install WWE ROM 3.14 in three ways but fail for several times. 1st way of install - Extract WWE file and rename that LEOIMG.nbh. then put in 32bit formatted SD card then reset and hold the volume down button but it fails install. 2nd way - help of SSPL I have tried and fail again. 3rd way - direct click on WWE ROM from PC and fail.
can any one help me to install English ROM please?
Thank you
Bootloader
USB
Hspl4
3.03.hspl
Bootloader
USB
Run 3.14 update on PC.
samsamuel said:
Bootloader
USB
Hspl4
3.03.hspl
Bootloader
USB
Run 3.14 update on PC.
Click to expand...
Click to collapse
can you please xplain in details with link for download software ?
Link to hspl4 in my sig, the rom you already have. Just follow the steps.
If you don't know how to get into bootloader and haven't Googled it or read the stickies you shouldn't be flashing!
Ill add a few more words if it helps..
Enter bootloader,
Connect the USB (word "serial" becomes "USB")
Run hspl4
Choose 3.03.hspl
When it completes re enter bootloader
When serial becomes USB run the 3.14 update. (From the PC,,, you can't do this type of update from a SD card,)
samsamuel said:
Link to hspl4 in my sig, the rom you already have. Just follow the steps.
If you don't know how to get into bootloader and haven't Googled it or read the stickies you shouldn't be flashing!
Ill add a few more words if it helps..
Enter bootloader,
Connect the USB (word "serial" becomes "USB")
Run hspl4
Choose 3.03.hspl
When it completes re enter bootloader
When serial becomes USB run the 3.14 update. (From the PC,,, you can't do this type of update from a SD card,)
Click to expand...
Click to collapse
yes! its done ! so many thnx man
Hello XDA.
as you can see iam new to the forum. and i have been trying some basic SD roms. and kinda found out that i realy liked the miui roms.
So i was about to try to install [ROM] HTC HD2 Leo MIUI.us Presents MIUI 1.7.15 Pure English [AOSP]
But then i noticed in the Unlocking HD2 step that my phone isnt unlocked and its also running spl 3.03.
So what i need help with is.
how do i downgrade to 2.08? (witch is needed in the next step) so i can continue the steps...
my phone is a european htc hd2 (norway) and is still running stock wm 6.5.
All help appreasiated.
Bootloader
Hspl4
Choose 2.08.hspl
thanks for the respond.
but would it be possible to be litle more detailed?
edit:
When you say bootloader i assume you refering to MAGLDR...
No,bootloader is bootloader,magldr is magldr. Plenty of stickies hand holding you through all this,and countless hundreds single threads explaining it.
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
worked like a a sharm.
think i touth this was way more advanced so. my head wasnt sett it was this easy to understand. .
Nigeldg said:
Download HSPL 4. Connect phone to PC via ActiveSync. Run HSPL4 on PC and choose HSPL 2.08. Wait a few seconds. Should see 'We Hacked it!' on phone. You can now go ahead and (try) to install android following the other steps.
Click to expand...
Click to collapse
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
forget activesync, ,
get hspl4 (see my sig)
put phone in bootloader
connect usb
when 'serial' becomes 'usb' run hspl4
choose desired target spl/hspl
go
done.
ReshamG said:
Mate. Can i do this same step for my T-Mobile UK HTC HD2. Sorry I am total noob. I got lost in Download HPSL 4 and ActiveSync.
Click to expand...
Click to collapse
Yeah as Samsamuel said, ActiveSync is not really necessary it's just easier for most people to understand.
Before doing this I would recommend updating your ROM to the latest official stock ROM 3.14 (go to the settings and then software info to see this if my memory serves me correctly, haven't used WinMo in ages ) as this will have the latest radio and will save you from having to reflash it later.
Download HSPL4 package (just see samsamuel's link in his sig), turn the phone off then boot into bootloader by holding power and volume down buttons. Connect phone to PC via USB, run the HSPL installer, select HSPL 2.08 (make sure it's HSPL, not SPL, SPL 2.08 won't do any damage, but it won't help either ) and viola, it will be installed after a few seconds
i have spl 1.67 how to upgrade or downgrade?
My way to HTC ROM for the Swisscom 166 Trophy of my governance
I have tried something from posts in this forum and the only way to get
HTC Rom is this way
For the installation:
Turn of your device, hold the volume down button and turn on your device
Connect your device to PC via USB cable.
Download RUU_Spark_Vodafone_CH-DE_1.08.166.02_Radio_5.50.09.15_22.23.50.09U_by_an sar
from
http://forum.xda-developers.com/showthread.php?t=924333
Install RSPL from DFT Team
Install HSPL from DFT team
You will find RSPL and HSPL from DFT Team in this Thread
http://forum.xda-developers.com/showthread.php?t=1195647
Download RUU_Spark_HTC_Europe_1.10.401.04_Radio_5.52.09.16_ 22.33a.50.10U_by_ansar
from
http://forum.xda-developers.com/showthread.php?t=924333
After this installation's you can boot normaly and configure your device.
Connect your device to PC via USB cable and start Zune
With Zune you will get the newest versions (NOT MANGO).
German greetz
Schmerzspender said:
My way to HTC ROM for the Swisscom 166 Trophy of my governance
I have tried something from posts in this forum and the only way to get
HTC Rom is this way
For the installation:
Turn of your device, hold the volume down button and turn on your device
Connect your device to PC via USB cable.
Download RUU_Spark_Vodafone_CH-DE_1.08.166.02_Radio_5.50.09.15_22.23.50.09U_by_an sar
from
http://forum.xda-developers.com/showthread.php?t=924333
Install RSPL from DFT Team
Install HSPL from DFT team
You will find RSPL and HSPL from DFT Team in this Thread
http://forum.xda-developers.com/showthread.php?t=1195647
Download RUU_Spark_HTC_Europe_1.10.401.04_Radio_5.52.09.16_ 22.33a.50.10U_by_ansar
from
http://forum.xda-developers.com/showthread.php?t=924333
After this installation's you can boot normaly and configure your device.
Connect your device to PC via USB cable and start Zune
With Zune you will get the newest versions (NOT MANGO).
German greetz
Click to expand...
Click to collapse
Nice.. This method works with every HTC Device (first generation)!
Since I am a noob have patient with my stupidity!
That said
I have a
Trophy with Bootloader
PC40100
SPL- 4.6.2250-0 (129185) MNG
OS 7.10.7720.68
Firmware 2250.21.40600.401`
Radio: 5.69.09.05a
I have read all the threads by ansar and it just made me more confused.
I upgraded to "RUU_Spark_S_HTC_Europe_5.10.401.06_5.69.09_RELEASE med internet sharing", so I thought maybe I could "jailbreak the phone since It costed 370 dollars"
and followed Ansar "SPL ROM to downgrade 5.10.x Bootloader "
I just got stock on 0% when I flashed a custom file "RUU_Spark_HTC_Europe_4.06.401.01_Radio_5.69.09.05a_22.50.50.21U_Mango_7720_custom_by_ansar"
SO I tried the whole DFT w7p2 but no RSPL or HPSL where to be installed. Bootloader showed I had 1.10.5 but DFT supported 1.10.4
I couldnt get out of it so I flashed back to STOCK version "RUU_Spark_S_HTC_Europe_4.06.401.00_5.69.09_RELEASE"
I noticed the bootloader was changed to SPL 4.06
MY question is WHAT am I doing wrong??
Since I am a noob keep your answers really basic!
Please help!
Kind regards from Sweden
Really...
....No one out there has a tips/hints
Well
Can someone at least explain what I have to do to "sideload" my Trophy?Bootloader?!
What do you need to do? step by step?!
DFT v2?
RSPL?
Custom firmware?
Problem SOLVED!!
Problem Solved!
(Please observe I assume that you know what you are doing and know the basic stuff regarding the phone, I am just a beginner like you)
Please remember all this will erase everything you have on the phone.(back it up)
You need the following:
-MircoUSB cable(for connecting the phone to computer)
-Zune installed on your computer (BUT DON’T RUN IT UNDER ANY CIRCUMSTANCES) (you need zune for installing Modem drivers on your computer)
-Windows Phone Developer Tools installed on your computer (for deploying /sending software to the phone when you are done jailbreaking it) I will get back to you on how to put apps on your phone the “Sideload” way
My phone has PC40100 and SPL 5.10 (so in theory it is not possible to install Cooked firmware)
What I did was the following:
1. Put the phone into Boot (hold down volume down and power at the same me when the phone starts it is like IOS DFU nothing major happens. Now you can see tri color (red,green and blue) on the white/bottom of the screen you can read “serial”)
2. Connect the phone to the Computer using your USB cable , and if you hear a you’re your computer you know it is connected to computer and your “serial” changes to “USB” on your phone
3 Downgrade the phone with RUU_Spark_HTC_Europe_5.10.401.06_SLSPL_Signed_by_ansar (search it on the forum)
4. Now the phone restarts into tricolor /DFU and nothing more happens , it is not dead just needs to be programmed (if you do nothing it will eventually reboots and windows phone starts, don’t do that it is just a waste of time, keep it in boot)
5. Choose the STOCK (stock means the released original firmware by HTC/Microsoft ) version of windows phone RUU_Spark_HTC_Europe_1.10.401.04_Spark_5.52.09_RELEASE (search it here on the forum) the 1.10.401.04 works fine with the jailbreak tool from DFT (dark force team)
6 . Install the stock version it will downgrade your phone from SPL 5.10 (SPL stands for the original boot of the phone ) to SPL 1.10.401 this is what you want
7. when it is done your phone will start and it looks fine but if you check the system in settings you will find that it is SPL 1.10.401 and the multitasking is gone.
8. REMEMBER DON’T connect the phone to Zune it will just update it and ruin everything
9. Now you need install RSPL /HSPL on your phone to be able to install cooked firmware (cooked means someone else like Ansar(a user here) has done all the work and removed the locks in the original firmware and made it easy for you and me to install software on the phone which is called by the way “sideload”)
10. DFT (dark force team has a jailbreak for boot which makes it possible to install cooked firmware)
11. Search and download DFT_XSPL_WP7FG1
12. You need to install RSPL first to be able to use HSPL (HSPL is more permanently like untethered jailbreak in IOS)
13. Put the phone again into BOOT mode (with tri colors) and connect it to the computer and run DFT_RSPL_WP7FG1_LAUNCH from your computer (just follow the onscreen instruction from DFT teams software and choose 1.10.401 it is imperative that you choose this for this jailbreak to work)
14. when it is done you will see RSPL on the screen of your phone (you are actually done here if you don’t want to lose your warranty but I doubt you have some left if you do GOOD for you , RSPL is reversible but HSPL is not)
15, in my case I went ahead and installed HSPL just to be safe it works , cause RSPL disappears when the phone is shut down. I just installed HSPL when the word RSPL showed on my phone but it is optional if you want that or not.
16. From where you see RSPL/HSPL it means your phone is ready for COOKED firmare NOT original/stock firmware REMEMBER THAT installing stock/original firmware will brick/destroy your phone, every page in this site says it DON’T push your luck
17.Install any Cooked firmware from Ansar (a user named ansar look him up and don’t forget to thank him for all this work) for instance HTC_Europe_5.12.401.06_Radio_5.69.09.05a_22.50.50. 21U_NT_Mango_8107_22L_TU_by_ansar (which is the latest )
Remember if you have any question I will be more than happy to help but I am just a beginner, you should ask Ansar directly here.
DISCLAIMER you do all this on your own risk.
Break a leg!!
This thread should be moved to the Development forum for Trophy (Spark). The name of the thread should be renamed to something like "[HOWTO] Downgrade bootloader for Spark GSM to use DFT."
Many seem to use the Goldcard method on Spark GSM, but I wonder if anyone else can use this guide.
TheXev said:
This thread should be moved to the Development forum for Trophy (Spark). The name of the thread should be renamed to something like "[HOWTO] Downgrade bootloader for Spark GSM to use DFT."
Many seem to use the Goldcard method on Spark GSM, but I wonder if anyone else can use this guide.
Click to expand...
Click to collapse
Thanks for the feedback but I cant post messages in the Development forums since I am noob.
You are more than welcome to move the thread whereever you see fit.
I hope some people find it helpfull.
You need a particular number of post before you can post in dev forums. Just go around helping people and you'll get that number quickly (that's what I did).
once again thanks =)
works for spl 5.12 in my case
Hi! just did this to downgrade from SPL 5.12.?
Works apparently, my phone is now HSPL
W8ing 4 Ansar's latest ROM to download over this #$%#$%&"&"#$!" Rapidshare :]
It'll take till morning the way this downloads (it's 1:13 am here in Slovenia....)
I'm just trying this.. I hope it works.
Not working in my case (SPL 5.12.2250) . Get an error while downgading spl "invalid vendor ID"