[Q] How to audio wireless reciever - Nexus 7 Q&A, Help & Troubleshooting

I play D&D and I'm using soundboards through my nexus 7 to my Denon home receiver. I currently have it 3.5 wired to the vaux input.
What is the most efficient manner for me to send the audio without having my nexus physically connected to my receiver?
I have googled and found some bluetooth adapter solutions but ever since my logitech keyboard windows bluetooth grief (which it finally ended up in the dumpster) I cringe at bluetooth.
I do own a spare xbox 360 but I'm not certain if it will allow me to play sounds through the soundboard or if they have to be through a dedicated audio player (which in this case would be nfg).
So yeah, anyone have an idea? Should I take the raspberry pi leap ($35)+($35 worth of proper accessories) or is there something easy?
Cheers,

Maybe I am not posting this in the right forum?

Related

Anyone using their Titan as an MP3 player in the car?

I found out I can put rhapsody tracks on the SD card on my Titan (XV6800) so I've been using it as my car MP3 player. Problem is when it's plugged into the charger I get some noise (the phone is connected to my car using an aux port.) My question is does anyone use a similar setup, and if so what do you use as your charger? Right now I'm using a cig port to USB thing. I could probably reroute the ground, but I'd rather not deal with the mess of wires.
is this capable?
ca3sar said:
is this capable?
Click to expand...
Click to collapse
?? Are you asking how I have my phone as my MP3 player?
You need something like this. I have that connected to the 2.5mm/USB splitter that comes with the phone, then there's a 3.5mm lead that goes from that connector to my car stereo's aux input.
Considering there's a mic on the adapter, it doubles as a handsfree kit so when a call comes in, the music pauses and I can hear the caller through my stereo.
Pioneer Avic D3
I have the Pioneer Avic D3x in my car with the bluetooth module. I just installed it. I had to install a plugin on the mogul called a Jet something and it connected fine with my audio in the car. I can listen to my radio station SuperRadioMix.com and it mutes out when someone calls. The station streams perfectly to my mogul phone. This may sound like a advertising for my radio station....and it is. . Just to let you know you can do it.
C-Zer
DJ C-Zer said:
I have the Pioneer Avic D3x in my car with the bluetooth module. I just installed it. I had to install a plugin on the mogul called a Jet something and it connected fine with my audio in the car. I can listen to my radio station SuperRadioMix.com and it mutes out when someone calls. The station streams perfectly to my mogul phone. This may sound like a advertising for my radio station....and it is. . Just to let you know you can do it.
C-Zer
Click to expand...
Click to collapse
Oh yea, blutooth would solve the problem because it's most likely related to the common ground, however I already have a rather nice Eclipse head, so I'm not looking to replace it. I am looking around for blutooth adapters though.
That noise you're hearing is a ground loop. The only way to get rid of it is to use some kind of ground loop noise isolator, like this one:
http://www.crutchfield.com/S-Q56nh4BU3tR/App/Product/Item/Main.aspx?i=127SNI135
I use Mortplayer on my Titan for MP3's as well as streaming radio. It works really good!
Coodaddy
i had a mini usb to 3.5 adapter but didnt work, i have verizon? any possible links?
ca3sar said:
i had a mini usb to 3.5 adapter but didnt work, i have verizon? any possible links?
Click to expand...
Click to collapse
This is exactly what I'm using. You can find it on Verizon's site, you might also be able to find it in the store.
Thanks coodaddy1, I figured that was the next step. I thought about running a ground from the cig lighter to the chassis to see if it eliminated the hum.
I am using the usb/2.5 splitter that came with the phone with a 2.5-3.5 splitter i got a radio shack, all that connected to my stereo line in. Works like a charm.
propagandax said:
I am using the usb/2.5 splitter that came with the phone with a 2.5-3.5 splitter i got a radio shack, all that connected to my stereo line in. Works like a charm.
Click to expand...
Click to collapse
I found that the 2.5-3.5 doesn't have the correct amount of posts and you will need to eventually pull out the tip to get full stereo (are you sure you are getting stereo sound rather than mono out of both speakers- all left or all right)?
If that works, cool!
This is what you need - Car Dock with Audio out
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=881
NICE
I have ordered from these guys before - very high quality
I use mine for that all the time. I have one of those bracketron mounting clips that clip to your vent and I use the included headphone adapter and the usb splitter (becuase it wont charge unless you connect the power to the usb splitter). I connect a mini usb cable to a usb adapter in the charger socket. To connect to the radio on my ford focus I have a digital adapter that lets me use standard rca jack input to the digital port on the back of the factory radio (works with any any audio source)
To connect to the 2.5mm headset adapter,I have a cable I made by chopping the end of a old 2.5mm handsfree headset and soldering a standard 3.5mm headset socket to it. You should be able to buy a similar adapter from any vendor on the web. The headset that the moguls included adapter wants is the standard four conductor one that most multimedia cell phones like the samsung a920 use. (I originally used the cable I made with a samsung) The only problems I have had is that vibration from driving sometimes jiggles the mini usb loose from the phone and you have to plug it in again. I guess I could route the cable over the top of the bracket to hold it in place to solve the problem,in fact,Ill try that tomorrow.
One other problem I have had is tomtom as it has no internal media player. I was using it for gps functionality,but other than the fact that it is missing all sorts of key information on my area,like points of interest that it really should have,its very difficult to switch out of it and control media player. That means that while you can start your music and then launch the gps program you are then stuck with whatever your play list is and cant control media player. Other than that it does work well and the voice comes through fine. I switched to Garmins gps software and it works great. It does not even need to have some other app initialize the gps like tomtom does. It does not have an internal media player either,but at least its a little easier to switch out of.
im running a bt headset with a miniplug straight into my aux input in my car. works well enough to stream music and mp3s

Car stereo that allows simultaneous bluetooth connections?

Does anyone know of a car stereo that allows (2) simultaneous bluetooth connections? Ive searched and obviously, they will allow multiple connections... but not at the same time.
Here is why I ask. I would like to use my Tab in its new Samsung car mount for media playing. But since I also still need to have a phone, I would like THAT to connect also.
Im asking for too much arent I? Anyone try a 1/8th inch audio plug to RCA cable? I guess I could plug the TAB in via the AUX port on my car stereo when its in the dock.
Anyone had any success? Any ideas? Am I crazy?
JVC chameleon...
Sent from my SPH-P100 using XDA App
My Sony DSXS300BTX connects to both my Captivate for phone and my GTab for music. It will switch source when a call comes in, and resume playing when the call is done (can't recall if it pauses or just mutes the music though).
My girl's Kenwood DNX5160 can also do dual BT connections for phone+music.
Thanks guys, I will check these out... I was dreading having to use the wired aux output!

Wireless headset with the nexus 7?

So I'm looking at 2 wireless headsets to use with my tablet. No clue if it's even possible, but that's why I'm asking you guys.
The first link is to the official ps3 wireless over the ear headset.
http://www.amazon.com/gp/aw/d/B0053OLY9O
Second link is to the Sony 900mhz over the ear wireless headset.
http://www.amazon.com/gp/aw/d/B0001YFZ2I
Blue tooth isn't supported on either one. The Ps3 set has a mic and is strictly usb
The Sony set has no mic and uses a stereo jack.
Sent from my Galaxy Nexus using Tapatalk 2
The PS3 one would probably need specific drivers and the USB transmitter would need to be plugged into an OTG cable attached to the tablet. Specific drivers probably rule that one out. The Sony one that has a stereo plug would work if you used a Bluetooth Stereo adapter http://www.amazon.com/Jabra-CLIPPER-Bluetooth-Stereo-Headset/dp/B0040X33SE/ref=pd_cp_cps_1 Samsung, Sony, Motorola, etc make similar devices. You wear the bluetooth adapter and plug your headphones into the adapter. I use a Motorola Soundpilot and Bose headset they work quite well within the limitations of BT for music and games.
I got this last week. So far so good.
http://amzn.com/B004BW74DO
@jibaro009
Have you used / tried the microphone for VOIP voice calls Vonage, Google Voice etc??
I think I'm getting these. Plus can use with ps3, etchttp://www.gamestop.com/accessories/universal-afterglow-wireless-headset/103048
Sent from my Galaxy Nexus using Tapatalk 2

roku-like audiocast to phone / headphones

Hey all.
I found a rather dirty hack that seems to work better than Bluetooth audio for listening to private audio from the firetv.
Installing bubbleupnp works good on my phone for audio casting to xbmc, so I tried the same on the firetv in reverse.
I had the xposed installer already on the firetv for llama support, so all I needed was to install the bubbleupnp app and bubbleupnp module in xposed.
Experimenting, I played from xbmc to my bubbleupnp app on my phone and it worked. There was a little delay, but it was more constant than the delay that BT headphones have with the firetv. Adjusting the delay on the xbmc app, and I had my private audio. I hadn't tried with any of the other video apps on the firetv, but I'm thinking the delay will be there. At least I can use it for xbmc.
Just wanted to put that out there. Hopefully a better option for sending and listening to audio will come out soon.
t3ch42 said:
Hey all.
I found a rather dirty hack that seems to work better than Bluetooth audio for listening to private audio from the firetv.
Installing bubbleupnp works good on my phone for audio casting to xbmc, so I tried the same on the firetv in reverse.
I had the xposed installer already on the firetv for llama support, so all I needed was to install the bubbleupnp app and bubbleupnp module in xposed.
Experimenting, I played from xbmc to my bubbleupnp app on my phone and it worked. There was a little delay, but it was more constant than the delay that BT headphones have with the firetv. Adjusting the delay on the xbmc app, and I had my private audio. I hadn't tried with any of the other video apps on the firetv, but I'm thinking the delay will be there. At least I can use it for xbmc.
Just wanted to put that out there. Hopefully a better option for sending and listening to audio will come out soon.
Click to expand...
Click to collapse
so with what you did is, you basically had the audio stream of a video playing on your phone? I have already installed bubbleupnp on both my note 3 and the fire tv (xposed module on both devices too)but im clueless as to how to make this work. all i have managed is to cast audio(but only music and not video) from my phone to the fire tv, or initiate a video from the fire tv to start playing on my phone, making the fire tv a large remote and my phone the video player lol.
thing is I've never used bubbleupnp before so this whole casting thing is new to me. Maybe you are able to give more details as to what you did? what you set the renderer and library to on both your phone and the tv? Would gladly appreciate it as this is the last piece of the puzzle for me as to configuring the fire tv. would really like xbmc to play the video while my phone plays the audio!! thx!!
Exactly as you said it.
Set bubbleupnp to audiocast to my phone.
Listen on my phone.
Get frustrated because bubbleupnp won't ever change their design to be able to sync. Apparently, the delay is inevitable. Not sure why, as allshare seems to have it figured out.
I'm going to give up on this, as I've had no luck from this method. Will wait to see if a BT ad2p(?) Receiver Profile can be used with phones.
t3ch42 said:
Exactly as you said it.
Set bubbleupnp to audiocast to my phone.
Listen on my phone.
Get frustrated because bubbleupnp won't ever change their design to be able to sync. Apparently, the delay is inevitable. Not sure why, as allshare seems to have it figured out.
I'm going to give up on this, as I've had no luck from this method. Will wait to see if a BT ad2p(?) Receiver Profile can be used with phones.
Click to expand...
Click to collapse
You know what im doing now? I play the movie using xbmc, but also start the movie playback on my phone using mx player.But mx player has the capability to only play the audio with the screen off, so thats what im doing now. Its easy enough to get the audio synced, and the batt drain isnt too bad, 16% for 130 minutes movie (DTS downmixing). a 40 minutes itunes web dl would consume about 4% if its on AC3, but i presume it would be very similar even if it was just AAC.
Until a more seamless method comes out, this is what im gonna be doing, as its easy enough, and no extra purchase required
ars_92 said:
You know what im doing now? I play the movie using xbmc, but also start the movie playback on my phone using mx player.But mx player has the capability to only play the audio with the screen off, so thats what im doing now. Its easy enough to get the audio synced, and the batt drain isnt too bad, 16% for 130 minutes movie (DTS downmixing). a 40 minutes itunes web dl would consume about 4% if its on AC3, but i presume it would be very similar even if it was just AAC.
Until a more seamless method comes out, this is what im gonna be doing, as its easy enough, and no extra purchase required
Click to expand...
Click to collapse
Lol...
I've played around like that in the past. It does put more load on your network and hard drives though. Tolerable but unfortunate.
I'm giving BT another try. Picked up a car mp3 3.5mm out unit from amazon for $8.50 or so that I'll be able to sync up easily enough. i can plug my own headphones up and plug it into the USB chargers at my bed. I'll see how that works. Hopefully this will be an option.
How nice would it have been if they just gave the headphone out thru remote capability like the roku 3....sigh
Do update on how well your new plan goes. Thanks!
Sent from my SM-N9005 using Tapatalk
Any update or progress on development of using bluetooth headphones without sync issues?
When you guys described the worsening audio offset which cannot be corrected because it keeps getting worse over time, how long does it take to see it noticeably worsened?
The reason i am asking is I finally was able to install Settings.apk and paired my bluetooth headphones (Noontec Zoro wireless BT headphones).
When I played a movie in XBMC, I didn't think the audio offset was that bad. Better yet, I didn't notice that it worsened over time. I watched it for over 20 minutes and didn't notice any change. I did a manual offset of .4 sec to compensate and it seemed fine after 20 minutes or so. Will I notice it after more time?
The only thing on my config that might be different than others is that in XBMC 13.1 Gotham stable release, is that I have Hardware acceleration enabled but I unchecked both Mediacodec and libstagefright (it is the only way that I can watch xvid without stutter and doesn't seem to affect mp4 h264 movies). Maybe someone else can try this?
Also, movies I played on Plex shows the same...small lag but somewhat tolerable and it didn't seem to get worse over time, but I only did this for about 5 minutes.
superflysocal said:
Any update or progress on development of using bluetooth headphones without sync issues?
Click to expand...
Click to collapse
Have had pretty good luck with xbmc 13.2 beta rc1.
Am using this BT adapter but only have a few issues now. This syncs up to the fire TV and the audio stays in sync with xbmc.
As I stated in my review, the channels are reversed. Not a real big deal as I can switch my headphones manually to the other ear. After checking my son's BT headphones too, I'm beginning to think all the Chinese imports have their audio connections backwards.
As I watch the show tonight, I can say that the BT alternative is working pretty good. I've had it set forward about 0.2sec ahead and it was quite tolerable. Seems to be getting better. Maybe next update will fix it.
Anybody else had any better luck?
t3ch42 said:
Have had pretty good luck with xbmc 13.2 beta rc1.
Am using this BT adapter but only have a few issues now. This syncs up to the fire TV and the audio stays in sync with xbmc.
As I stated in my review, the channels are reversed. Not a real big deal as I can switch my headphones manually to the other ear. After checking my son's BT headphones too, I'm beginning to think all the Chinese imports have their audio connections backwards.
As I watch the show tonight, I can say that the BT alternative is working pretty good. I've had it set forward about 0.2sec ahead and it was quite tolerable. Seems to be getting better. Maybe next update will fix it.
Anybody else had any better luck?
Click to expand...
Click to collapse
So where do you plug this into? The USB port of the AFTV? how do you pair it?
superflysocal said:
So where do you plug this into? The USB port of the AFTV? how do you pair it?
Click to expand...
Click to collapse
Its a simple little BT receiver that allows a 1/8” headphone jack or jumper to plug into your car aux. It has a battery which lasts three or so hours with headphones plugged in.
To sync, turn on the switch and search with your phone, firetv or whatever you have with BT audio. It automatically connects. Simple. Cheap.
I actually use a pair cheapo 2.4ghz headphones I got as a gift. None audio sync issues I had using a bluetooth transmitter. I just plug it into either the headphone port on the bedroom tv or on the av receiver when I watch in the living room when I can't sleep.
these look nice
The JBL WR2.4 looks nice for under $50 at Amazon
goodhur said:
I actually use a pair cheapo 2.4ghz headphones I got as a gift. None audio sync issues I had using a bluetooth transmitter. I just plug it into either the headphone port on the bedroom tv or on the av receiver when I watch in the living room when I can't sleep.
these look nice
The JBL WR2.4 looks nice for under $50 at Amazon
Click to expand...
Click to collapse
Most tv now a day doesn't have headphone jack.
Some of us don't have receiver in bedroom tv
superflysocal said:
Most tv now a day doesn't have headphone jack.
Some of us don't have receiver in bedroom tv
Click to expand...
Click to collapse
My bedroom TV has a headphone port the side and no av receiver. That tv is technically a computer monitor with hdmi and a tuner. So that may explain why it still has a headphone port. However, many larger TV's still have an audio out (line level, red and white RCA) that can be used with wireless headphones. There are also toslink to analog convertors or HDMI audio extractors that you can get for about $25. You could use one to achieve line level audio.
I have been researching TV's since the living room tv is old. My living room TV is ridiculous it is HD but it is a 50" plasma from 2004 and it was built before ASTC HD tuners were put in TV sets. The last owners left it because it was a pita to move, I can't imagine how much it would have cost in 2004.
The headphone I mentioned appears not to be a good choice in the line level audio output scenario.
t3ch42 said:
Its a simple little BT receiver that allows a 1/8” headphone jack or jumper to plug into your car aux. It has a battery which lasts three or so hours with headphones plugged in.
To sync, turn on the switch and search with your phone, firetv or whatever you have with BT audio. It automatically connects. Simple. Cheap.
Click to expand...
Click to collapse
Then I am not sure how this approach would be different than using bluetooth headphones other than you getting lucky with this particular unit compared to others. It is bascially a bluetooth headphone without the headphones.
It's great that it works for you though.
superflysocal said:
Then I am not sure how this approach would be different than using bluetooth headphones other than you getting lucky with this particular unit compared to others. It is bascially a bluetooth headphone without the headphones.
It's great that it works for you though.
Click to expand...
Click to collapse
You're right. They are no different. What I did notice is the audio did not seem too out of sync if at all with the newer version of xbmc.
Of course, it could just be a coincidence with a movie that had it audio set out of sync already...I don't know. I may have been more tolerant of the prep work in order to get it to work, pause the video, adjust delay forward, unpause and verify.
The point for me was that it was easy. The BT receiver could have been a more expensive one or cheaper. I don't think it matters too much right now as the BT audio is just an unintended positive side effect.
Amazon may enable a better fix soon or someone may mod a custom image with support if the bootloader opens. Its possible. Either way, I'm happy with the amazon TV. There a bunch more options and capabilities available on this xbmc box than any of the others I've had.

Bluetooth Headphones?

Hello!
Real quick question and haven't seen anything recent about it. Do Bluetooth headphones work with the nexus player yet?
Thanks for any info. About to set up an audio/video situation and this would be perfect for me!
Just paired my Jaybird X2's with it and they work.
They work after the Marshmallow OTA.
I have tried BT heaphones with Nexus Player and it doesn't work as well as the Fire TV. I get a lot of stuttering with the Nexus Player. Not sure if it's casue if the BT is better in Fire TV.
I have some that work and some that don't. Right now I have a Bluetooth receiver that I can connect to my wired headphones so I can watch movies at night without bothering the family.
is it possible to do it with a app that is running on the phone. For example ios or android phone. because these devices have the bluetooth feature

Categories

Resources