Database Users

US OTA ICS won't update after root...

I rooted my TPT with the yet another root exploit method while on version 0089_US, and it worked great. Then I installed RootKeeper and temporarilly unrooted. My TPT is not and never has been modified in any other way, no CWR, no apps deleted, nothing.
When I try to install the OTA ICS update, it will start to install, and then fail with some kind of assert failed error message that mentiones busybox, and then say error in /cache/update.zip.
Anybody know what's going on???

I had the same issues with the ROW update. I followed this thread (thoroughly) and got ICS with root intact.
http://forum.xda-developers.com/showthread.php?t=1723048

I'm confused. The fix was:
"Restored busybox from the same file mentioned before and it worked."
How do I "restore" busybox?

userno69 said:
I'm confused. The fix was:
"Restored busybox from the same file mentioned before and it worked."
How do I "restore" busybox?
Click to expand...
Click to collapse
Here's what I needed to do to get busybox restored and access to my stock recovery again:
1. Downloaded a previous update from Lenovo's site. (had to go two versions prior to find one with a busybox file in it).
2. Extract the Busybox file from the archive (system/xbin Directory)
3. Copy the file to your tablet
4. Using ES File Explorer or Astro, copy this Busybox over to the system/xbin Directory on your device. Note: I had trouble here with permissions that came down to a few settings in ES File Explorer (system access, write permissions, etc).
5. Reboot into recovery by pushing Vol + a few times after Lenovo appears.
Hope this helps.
-A

Both ES File Explorer and File Manager fail when attempting to overwrite the existing busybox.
Any suggestions?

garypen said:
Both ES File Explorer and File Manager fail when attempting to overwrite the existing busybox.
Any suggestions?
Click to expand...
Click to collapse
Can you verify your ES file explorer root settings (Root Explorer and Mount file system enabled). These settings are required to make changes to system files.

EpsilonTheGreat said:
Can you verify your ES file explorer root settings (Root Explorer and Mount file system enabled).These settings are requibe able to overwrite busybox.
Click to expand...
Click to collapse
Thanks! That enabled me to overwrite busybox. Now, I am crossing my fingers that the OTA update works.
It started downloading directly from the "check for update" page, rather than quickly saying an update was available, and asking to reboot and install, as it had been doing. So, perhaps it checks busybox before even DLing the update.
It's taking a while to DL. I'll post results after the next reboot ad install attempt.

garypen said:
Thanks! That enabled me to overwrite busybox. Now, I am crossing my fingers that the OTA update works.
It started downloading directly from the "check for update" page, rather than quickly saying an update was available, and asking to reboot and install, as it had been doing. So, perhaps it checks busybox before even DLing the update.
It's taking a while to DL. I'll post results after the next reboot ad install attempt.
Click to expand...
Click to collapse
I saw the exact same thing after fixing busybox. Glad it worked for you (so far)!

Worked like a champ. Rocking ICS on my TPT with root.
It's really not a huge diff from HC. But, lots of little things that I had become accustomed to on my ICS phone.
The tpt does seem a little faster now. Play store is working better, too.
I just wish I could replace that stupid Lenovo quick app icon with the android app launcher icon, like on my nexus. Why do they locate the apps icon at the very top corner? Makes no sense.

I've tried all the busyboxes that I can find and still no update. Can someone post a working one?

I used the one from the 0086US update.

I found one, I used the OTA update.zip
http://forum.xda-developers.com/showthread.php?t=1507285 OTA Update.zip A310_02_0039_0086_US
Also, I kept root.

assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "Lenovo/ThinkPadTablet/Indigo:4.0.3/ThinkPadTablet _A400_03/0065_0128_US:user/release-keys" || file_getprop("/system/build.prop", "ro.build.fingerprint") == "Lenovo/ThinkPadTablet/Indigo:4.0.3/ThinkPadTablet _A400_03/0069_0130_US:user/release-keys")
Error in /tmp/sideload/package.zip
Summonabeeeetch!!!! I noticed its the first step of the script... any ideas? Anyone? Maybe Ian not destined for ics :-( any ideas?

daswahnsinn said:
I found one, I used the OTA update.zip
http://forum.xda-developers.com/showthread.php?t=1507285 OTA Update.zip A310_02_0039_0086_US
Click to expand...
Click to collapse
You can get it directly from Lenovo:
http://download.lenovo.com/slates/think/tablet1/ThinkPadTablet_A310_02_0039_0086_US.zip
Busybox is located in the system/xbin folder.

garypen said:
You can get it directly from Lenovo:
http://download.lenovo.com/slates/think/tablet1/ThinkPadTablet_A310_02_0039_0086_US.zip
It's located in the system/xbin folder
Click to expand...
Click to collapse
For some strange reason I couldn't get any of the ones from the lenovo site to work, Thank though this should help someone else for sure.

I was able to update to ICS with CW by editing the updater-script. I commented out the verification check.

ScotchtapeLoser said:
I was able to update to ICS with CW by editing the updater-script. I commented out the verification check.
Click to expand...
Click to collapse
Which ones did you comment out?

Your Tablet may vary....
I started with
Build.prop
Gmail
Anything starting with Google...
MarketUpdater
MediaProvider
Mediauploader
NetworkLocation
I would comment out the line, add the new updater-script to the zip file. Try it. When it threw out an error I would comment out that line... rinse and repeat
After a time I just became annoyed and comment out all of the apply_patch_check (around 450 lines). I do not advise using this shotgun approach.
bigsnack said:
Which ones did you comment out?
Click to expand...
Click to collapse

ICS OTA install busybox error
Hey guys I didn't want to start another thread because this one is very similar to the issue I am having now. My tablet asks me to install an OTA update but once its about half way done in recovery in spits out some kind of error(check attachment). When it comes to tablets Im a noob but I was wondering if you guys can give me some solid instructions on how to get past it?
Thanks in advance.

Reference this thread:
http://www.thinkpadtabletforums.com...ds-and-development/ics-ota-failing-w-busybox/

How to update to JB using DLPKGFILE and KEEP ROOT! Works!

Right, so, through a bit of trial and error using guidance from the forums, this is how I updated to JB and kept root for WW after the update originally failed.
download BOTH files from here (massive thanks to ch3mn3y):
http://www25.zippyshare.com/v/91334594/file.html
http://www1.zippyshare.com/v/96461494/file.html
then extract the .zip file.
download the command file from here (massive thanks to krabappel2548):
http://www.mediafire.com/?yq1bt16mnm7tc8d
extract it.
place the dlpkgfile and command file, both unzipped onto your tab. Use a root explorer to paste the command file into /cache/recovery and the dlpkgfile (the actual file, not the folder) to /cache.
go to Voodoo OTA Rootkeeper and temp unroot.
turn off the tab.
boot into recovery with Vol - and power, then when it says to press volume up to boot into RCK, do it.
You'll see the android with the blue wires and it will go through the install process if you have done it right. let it do its thing.
obviously, when it has settled, restore root with Voodoo.
If you get the android with red exclamation mark, i reccomend downloading the ICS zip of your current firmware and SKU and sticking it on a micro SD card, and letting it restore any programmes you've deleted.

rickykemp said:
Right, so, through a bit of trial and error using guidance from the forums, this is how I updated to JB and kept root for WW after the update originally failed.
download BOTH files from here (massive thanks to ch3mn3y):
http://www25.zippyshare.com/v/91334594/file.html
http://www1.zippyshare.com/v/96461494/file.html
then extract the .zip file.
download the command file from here (massive thanks to krabappel2548):
http://www.mediafire.com/?yq1bt16mnm7tc8d
extract it.
place the dlpkgfile and command file, both unzipped onto your tab. Use a root explorer to paste the command file into /cache/recovery and the dlpkgfile (the actual file, not the folder) to /cache.
go to Voodoo OTA Rootkeeper and temp unroot.
turn off the tab.
boot into recovery with Vol - and power, then when it says to press volume up to boot into RCK, do it.
You'll see the android with the blue wires and it will go through the install process if you have done it right. let it do its thing.
obviously, when it has settled, restore root with Voodoo.
If you get the android with red exclamation mark, i reccomend downloading the ICS zip of your current firmware and SKU and sticking it on a micro SD card, and letting it restore any programmes you've deleted.
Click to expand...
Click to collapse
Will your last line lose root on us, or will voodoo root keeper save it via that or does it wipe/reset the entire system?

Ashcunak said:
Will your last line lose root on us, or will voodoo root keeper save it via that or does it wipe/reset the entire system?
Click to expand...
Click to collapse
When i ran ran the zip of .30 i did lose root, but it was easily restored using 1 click transformer root.

I tried it twice but it always failed at about 1/3 of the process... Hopefully I can reboot w/ any damage...
WHY!?? :'(
Btw here's the part of the log where it shows the failure in installation:
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /cache/dlpkgfile
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
Check : blob size = 13104069
Verifying current system...
file "/system/lib/libGLESv1_CM.so" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/lib/libGLESv1_CM.so", "ed4c7834196831836c73d0374529a0278c2fa91c", "a52756f5a63c9827632587d025ee28f67739bd97")
assert failed: apply_patch_check("/system/lib/libGLESv1_CM.so", "ed4c7834196831836c73d0374529a0278c2fa91c", "a52756f5a63c9827632587d025ee28f67739bd97")
E:Error in /cache/dlpkgfile
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done
Btw the command file is just a file with content --update_package=/cache/dlpkgfile in it.
You can create it with notepad, save as .txt, and remove the .txt

rickykemp said:
When i ran ran the zip of .30 i did lose root, but it was easily restored using 1 click transformer root.
Click to expand...
Click to collapse
OH, wow, im so outa date thanks, i rooted on the first revision that came out and havent really watched whats out there for root options. i see this now thanks so much i was worried id have to all sorts of downgrading. link for anyone else whos "outa it" like me http://forum.xda-developers.com/showthread.php?p=26918790

WIIstpM said:
file "/system/app/Music2.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/Music2.apk", "c9bc168a88b5106e0e04f8e70023a4c33009021b", "cbb199983ab1cb9beee6b20ec4db659ccd49d757")
assert failed: apply_patch_check("/system/app/Music2.apk", "c9bc168a88b5106e0e04f8e70023a4c33009021b", "cbb199983ab1cb9beee6b20ec4db659ccd49d757")
Click to expand...
Click to collapse
Maybe u delete or freeze Music2.apk? First time when i forget to unfreeze /system apps my update failed too (but i dont remember when).

ch3mn3y said:
Maybe u delete or freeze Music2.apk? First time when i forget to unfreeze /system apps my update failed too (but i dont remember when).
Click to expand...
Click to collapse
I think I found the problem: I remember I pushed jelly bean's music2.apk in system/app! Restored the original music app.
Gonna try update again!
Now it the turn of libGLESv1_CM.so ...

Going to give it a try.
Just to make sure, is this for WW version, right?

ch3mn3y said:
Maybe u delete or freeze Music2.apk? First time when i forget to unfreeze /system apps my update failed too (but i dont remember when).
Click to expand...
Click to collapse
MM the Music app problem is resolved.. but now the same thing happens but with "/system/lib/libGLESv1_CM.so"
...

Tequila.CZ said:
Going to give it a try.
Just to make sure, is this for WW version, right?
Click to expand...
Click to collapse
Yep.

Thanks.
Looking good., but got this error:
file "/system/app/EmailWidget.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/EmailWidget.apk", "5655101db862ccc0b2e60bd8ee276192f80e0ac7", "25adaa94e23e2aa87a7dd7f01956ccbabbb960fc")
assert failed: apply_patch_check("/system/app/EmailWidget.apk", "5655101db862ccc0b2e60bd8ee276192f80e0ac7", "25adaa94e23e2aa87a7dd7f01956ccbabbb960fc")
E:Error in /cache/dlpkgfile
Already got this before my update notification stopped working.
I deleted Email app, returned it back to system but seems I dont have the right version. (found in someones dropbox posted here)
Also reflashed Ww. 30 hoping this would overwrite the widget with correct version. Obviously it did not...
Would be glad for any help.

As it is MY dlpkgfile it can need MY files. I could upload /system, but first its strange to copy/paste whole android and second it is 624mb and third it will work only for rooted and at least fourth i updated my pad.
If it helps my pad was reflashed to .30 using wolfs method cos i had screen issue.
Sent using tf300t - stock JellyBean (rooted)

ch3mn3y said:
As it is MY dlpkgfile it can need MY files. I could upload /system, but first its strange to copy/paste whole android and second it is 624mb and third it will work only for rooted and at least fourth i updated my pad.
If it helps my pad was reflashed to .30 using wolfs method cos i had screen issue.
Sent using tf300t - stock JellyBean (rooted)
Click to expand...
Click to collapse
Could you please try to upload just the EmailWidget?
When I tried using OTA I got an error on Email.apk first. Then I downloaded it from dropbox and it passed. But EmailWidget did unfortunately not.
Also trying to find a tool that could extract the .30blob file. I guess the apps should be there. Found something but probably Linux only so no go for me.

You guys made my day! I had the red triangle and couldn`t get the update anymore. Tried everything, nothing worked.
Now I just followed your guide, dl. your files and all went fine.
So sad I was ony able to hit the Tanks-button once. Thank you thousand times!
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

Here is emailwidget .apk and .odex but from jb not ics cos i didnt made a backup. But i think that it wasnt changed.
http://db.tt/cYSWYcXo
Sent using tf300t - stock JellyBean (rooted)

ch3mn3y said:
Here is emailwidget .apk and .odex but from jb not ics cos i didnt made a backup. But i think that it wasnt changed.
http://db.tt/cYSWYcXo
Sent using tf300t - stock JellyBean (rooted)
Click to expand...
Click to collapse
Oh man. I love you. Here I come on JB!
The EmailWidget was the missing piece.
Big thanks to rickykem, ch3mn3y and overyone who helped to create this workaround!

y17dt said:
You guys made my day! I had the red triangle and couldn`t get the update anymore. Tried everything, nothing worked.
Now I just followed your guide, dl. your files and all went fine.
So sad I was ony able to hit the Tanks-button once. Thank you thousand times!
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
+1:good:

Can someone post the original /system/lib/libGLESv1_CM.so pleeease...
Sent from my LG-P970 using xda premium

WIIstpM said:
Can someone post the original /system/lib/libGLESv1_CM.so pleeease...
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
I only have it from JB. Unfortunately it seems the file was updated together with the system so it will most probably be useless.
Don't have a libs backup from WW.30

WIIstpM said:
Can someone post the original /system/lib/libGLESv1_CM.so pleeease...
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Here you go, from ICS:
http://db.tt/z5B5Q3jL
Trimis de pe ASUS Transformer Pad TF300T

[Q] Problem updating to 4.3

Hi guys
I have a bit of a problem here!
I got the ota update, wanted to install it, but failed.
So i downloaded the ota zip file from our site. ([REF] Nexus 7 Stock OTA URLs)
Went to recovery and tried to install it, and bam. Failed!
It says Something about xt9ime.apk not being in system/app or sth like that.
Can anyone help me?
Edit: i have the recovery log file if it helps! :S

If you've changed or deleted any system files, that would do it.
It's even telling you what the problem is.
That file is changed or missing.

danvee said:
If you've changed or deleted any system files, that would do it.
It's even telling you what the problem is.
That file is changed or missing.
Click to expand...
Click to collapse
I replaced the file, but it isnt working.
Sent from my Nexus 7 using XDA Premium HD app

You should have had a look at your log file or have been done the update while running logcat, in that case you would see the exact error message / the file the updater is complaining about.
Sent from my Nexus 7 using xda app-developers app

AndDiSa said:
You should have had a look at your log file or have been done the update while running logcat, in that case you would see the exact error message / the file the updater is complaining about.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I said before, i have the log file. Do you want me to upload it for u? Or copy past it?
This is a part of the log file, a part that i think relates:
Installing '/sdcard/Download/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/Download/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07.zip.md5
Skipping MD5 check: no MD5 file found.
Warning: No file_contexts
Warning: No file_contextsVerifying current system...
failed to stat "/system/app/XT9IME.apk": No such file or directory
file "/system/app/XT9IME.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/XT9IME.apk", "4e36a5ed22057e493b47c0c71d36d9e2762d41dc", "8aba56a4406128e78f5729753252c3d93bc21cb4")
assert failed: apply_patch_check("/system/app/XT9IME.apk", "4e36a5ed22057e493b47c0c71d36d9e2762d41dc", "8aba56a4406128e78f5729753252c3d93bc21cb4")
E:Error executing updater binary in zip '/sdcard/Download/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07.zip'
Error flashing zip '/sdcard/Download/ab67ca07c4b2e03eca795ada10ff041b77fbb7bf.signed-nakasi-JWR66V-from-JDQ39.ab67ca07.zip'
Click to expand...
Click to collapse
Sent from my Nexus 7 using XDA Premium HD app

The updater doesn't find XT9IME.apk on your /system partition. Due to that it's failing. If you have a copy of the file, try to install it in recovery mode to /system/app and try to apply the update again.
Sent from my GT-I9100 using xda app-developers app

AndDiSa said:
The updater doesn't find XT9IME.apk on your /system partition. Due to that it's failing. If you have a copy of the file, try to install it in recovery mode to /system/app and try to apply the update again.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I know that. I got the copy of the file. I copied it using es file explorer, no success.
pushed it in fastboot, no success.
installed it and then made it a system app using titanium back up, again nothing.
i don't know what to do any more.
Need more help here!
Sent from my Nexus 7 using XDA Premium HD app

danvee said:
If you've changed or deleted any system files, that would do it.
It's even telling you what the problem is.
That file is changed or missing.
Click to expand...
Click to collapse
Do you have any idea how to fix this...
Any thing is appreciated...
Sent from my Nexus 7 using XDA Premium HD app

Did you make sure that the permissions matched the original?
Otherwise Best is to reflash the entire ROM...

danvee said:
Did you make sure that the permissions matched the original?
Otherwise Best is to reflash the entire ROM...
Click to expand...
Click to collapse
How can i make sure that the permissions match?
So, u r suggesting that i flesh 4.2.2 again, then flash ota to 4.3?
I'll lose all my data.
If i'm about to lose my data, i'd rather flash 4.3 rom. Huh?
Im confused!
Sent from my Nexus 7 using XDA Premium HD app

danvee said:
Did you make sure that the permissions matched the original?
Otherwise Best is to reflash the entire ROM...
Click to expand...
Click to collapse
I dont want to lose my filesm can u help me?
Sent from my Nexus 7 using XDA Premium HD app

Anyone please help.
I update it,it auto flash the zip in TWRP,now it stuck on "X" boot animation,don't start up.Any solution?

[ROM] JB-SlateROM, a custom ROM for the HP Slate 7

Disclaimer: I am NOT responsible for any damage you do to your device.
Slate 7 Plus 4200 owners, I have a version of this ROM for you guys as well. You can find it here.
This is JB-SlateROM, a customized and debloated ROM for the HP Slate 7! This was designed for the 2800 but might work on the 4600 as I haven't tested since I don't have a Slate 7.
EDIT: Confirmed working on the 2800!
EDIT: NOT working of the 4600/4601. I'll recook the ROM for you guys when time permits.
Before you can install this ROM you need CWM on your device. Go here to get a build of ClockWorkMod v6.0.3.3.
FEATURES
Bloatware removed! :victory:
If the bloatware is still there, go to Settings, then Apps. Find the app and hit Disable Updates. That will delete the bloatware permanently. If it's still there after that I did not remove it. Tell me what you want removed in that case.
Original launcher has been hidden (saved as an .apk-hide file) in favor of Apex Launcher.
ES File Explorer added.
GravityBox Xposed module added.
App Settings Xposed module added.
Quick Boot added.
Xposed Installer added. (Not activated by default! Go into the installer, hit Framework, then hit Install/Update, then hit Soft Reboot or Reboot!)
Download

Changelog
v2.0 - Coming Soon Complete redo. More bloatware removed and tweaked a few more things... (AKA the "If an android crashes and nobody is around to logcat, can it still be fixed?" Update)
v1.1 - Removed references to ePrint.kpa (UNRELEASED)
v1.0 - Initial release.
Sent from my Sero 7 Pro using Tapatalk

Hi, I just tried to install this ROM (on Slate 7 4601), but in CWM, I get the 'Status 7' error.
before this, I see the line 'set_perm: some changes failed'. If that helps, I don't know?
Thanks.

callidus_ex_de_latebros said:
Hi, I just tried to install this ROM (on Slate 7 4601), but in CWM, I get the 'Status 7' error.
before this, I see the line 'set_perm: some changes failed'. If that helps, I don't know?
Thanks.
Click to expand...
Click to collapse
The ROM must not be compatible with the 460x as I know it works fine with the 280x. I'll do a port of this with the 460x ROM and add it to the OP by next weekend at worst.

Hi. Same Error 7 here on my Slate 7 2800. Formatting all partitions before install doesn't change anything ..

dderek said:
Hi. Same Error 7 here on my Slate 7 2800. Formatting all partitions before install doesn't change anything ..
Click to expand...
Click to collapse
Which country is your Slate from? Status 7 means incompatible with device.
If you're really adventurous do a Nandroid then toggle signature verification then flash the ROM. Theoretically everything will work, but Nandroid just in case
Sent from my Sero 7 Pro using Tapatalk

Thank you for your reply.
My Slate is from Polish distribution channel. It's P/N is E0H92AA.
Signature verification is by default switched off in CWM. Looking at the detailed installation log I can see these lines before the Error 7 is reported:
minizip: Extracted file "/system/xbin/iwpriv"
minizip: Extracted file "/system/xbin/iwspy"
minizip: Extracted file "/system/xbin/su"
set_perm: chown of /system/vendor/app/ePrint.kpa to 0 0 failed: No such file or directory
set_perm: chown of /system/vendor/app/ePrint.kpa to 644 failed: No such file or directory
script aborted: set_perm: some changes failed
E:Error in /external_sd/_/JB-SlateROM.zip
(Status 7)
Installation aborted.
EDIT: adding original file /system/vendor/app/ePrint.kpa to your ROM allowed to install it within CWM 6.0.3.3.
But after reboot the device is now stuck at the HP logo
EDIT2: Suspecting the device incompatibility I have tested that the original firmware (taken from http://forum.xda-developers.com/showthread.php?t=2608181 ) runs without problems

dderek said:
Thank you for your reply.
My Slate is from Polish distribution channel. It's P/N is E0H92AA.
Signature verification is by default switched off in CWM. Looking at the detailed installation log I can see these lines before the Error 7 is reported:
minizip: Extracted file "/system/xbin/iwpriv"
minizip: Extracted file "/system/xbin/iwspy"
minizip: Extracted file "/system/xbin/su"
set_perm: chown of /system/vendor/app/ePrint.kpa to 0 0 failed: No such file or directory
set_perm: chown of /system/vendor/app/ePrint.kpa to 644 failed: No such file or directory
script aborted: set_perm: some changes failed
E:Error in /external_sd/_/JB-SlateROM.zip
(Status 7)
Installation aborted.
EDIT: adding original file /system/vendor/app/ePrint.kpa to your ROM allowed to install it within CWM 6.0.3.3.
But after reboot the device is now stuck at the HP logo
EDIT2: Suspecting the device incompatibility I have tested that the original firmware (taken from http://forum.xda-developers.com/showthread.php?t=2608181 ) runs without problems
Click to expand...
Click to collapse
It's because I removed bloatware and forgot to remove the references in the updater-script. Sorry about that, I'm VERY new to developing.
You should expect a updated ROM very soon. Probably tomorrow worst-case scenario.
Sent from my Sero 7 Pro using Tapatalk

Mmmh I tried to install your ROM but I got the same Error 7.
Then I proceeded to remove any reference into META-INF subfolders about ePrint.apk package and finally CWM installed it without hassle.
Nonetheless I got a stuck boot logo. I left it 5 minutes, but had no success, now I'm going back to my rooted 1.05.14 stock firmware.
I noticed a pair of things that may be useful to report:
- In /recovery folder there's a patch for the recovery. It may be useful to inhibit such patch, I added an exit 0 in /recovery/etc/install-recovery.sh just to be safe
- When you use CWM to do a factory reset (wipe data/factory reset), it doesn't wipe /system partition. You have to manually go in backup/restore -> format /system. Then you should wipe cache, maybe dalvik cache, and finally install the zip package.

blackshard83 said:
Mmmh I tried to install your ROM but I got the same Error 7.
Then I proceeded to remove any reference into META-INF subfolders about ePrint.apk package and finally CWM installed it without hassle.
Nonetheless I got a stuck boot logo. I left it 5 minutes, but had no success, now I'm going back to my rooted 1.05.14 stock firmware.
I noticed a pair of things that may be useful to report:
- In /recovery folder there's a patch for the recovery. It may be useful to inhibit such patch, I added an exit 0 in /recovery/etc/install-recovery.sh just to be safe
- When you use CWM to do a factory reset (wipe data/factory reset), it doesn't wipe /system partition. You have to manually go in backup/restore -> format /system. Then you should wipe cache, maybe dalvik cache, and finally install the zip package.
Click to expand...
Click to collapse
Is this a bootloop or stuck at bootloader?
Sent from my Sero 7 Pro using Tapatalk

how does this rom work on the 2801. Has it been updated?
Thx, vIgGeN!
jerbear294 said:
Is this a bootloop or stuck at bootloader?
Sent from my Sero 7 Pro using Tapatalk
Click to expand...
Click to collapse

jerbear294 said:
Is this a bootloop or stuck at bootloader?
Click to expand...
Click to collapse
Just stuck at bootloader. I see the HP logo (still image, not the boot animation) and then nothing happens. I have to push the power button for a long time to power off the device.

I'm redoing the ROM completely and hoping it works. Perhaps my Mediafire upload corrupted?
Sent from my Sero 7 Pro using Tapatalk

jerbear294 said:
I'm redoing the ROM completely and hoping it works. Perhaps my Mediafire upload corrupted?
Sent from my Sero 7 Pro using Tapatalk
Click to expand...
Click to collapse
Don't think so, the .zip file unpacked correctly.

Sorry for the hiatus- other devices were taking my attention.
I just need to add some things into the redone ROM then I'll upload it. It could take a couple days though, I'm busy porting PAC-ROM to my tablet. Once that's done I'll continue work on this.
Sent from my Sero 7 Pro using Tapatalk

jerbear294 said:
Sorry for the hiatus- other devices were taking my attention.
I just need to add some things into the redone ROM then I'll upload it. It could take a couple days though, I'm busy porting PAC-ROM to my tablet. Once that's done I'll continue work on this.
Sent from my Sero 7 Pro using Tapatalk
Click to expand...
Click to collapse
any idea on an update for this Rom?

keepaf1 said:
any idea on an update for this Rom?
Click to expand...
Click to collapse
Yep. I found the source of the error, and I am fixing it now.
Sent from my Sero 7 Pro using Tapatalk

Hellow, i want to request you to enable usb otg. There are many members on hp forums who are trying to enable it. Otg troubleshooter does not work on stock rom

jerbear294 said:
Yep. I found the source of the error, and I am fixing it now.
Sent from my Sero 7 Pro using Tapatalk
Click to expand...
Click to collapse
Looking forward to the new release. just got a slate 7 i repaired and cant wait to flash. thanks for your work on this!!!:good:

If you have the time please
Sorry to be a pain, but any idea when you will have the time to fix this. Its my grandsons tab and I would like to fix it for him. Thanks. I know I could probably learn how to do it myself but the old brain cells are a bit thick these days.

[file link] Official OTA Firmware

51.1.0.1 update
http://amzdigitaldownloads.edgesuite.net/obfuscated/e6f65fefb36aaf7b94fd370f516b9c11/bueller-ota-51.1.0.1_user_510055620-signed.bin
51.1.0.2 update [link from jcase]
http://amzdigitaldownloads.edgesuite.net/obfuscated/cec02756d1964c9cb1f71d52056cc81a/bueller-ota-51.1.0.2_user_510058520-signed.bin
-iNT0XiC8D

Is this the firmware thats currently on the box?
Sent from my iPhone using Tapatalk

Esso1001 said:
Is this the firmware thats currently on the box?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yes it it... its me saab7778 nice to see you here

So how we use this for a restore?
Sent from my VS980 4G using Tapatalk

MicroMod777 said:
So how we use this for a restore?
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I don't think you can yet, unless rooting enables it, since you can't read/write to /cache/. On the root of the /sdcard/ partition is a logcat.txt file (pull it via adb) that shows the initial update process. URL of the update, along with where it's stored and where the recovery expects to find it.
Code:
04-04 08:46:33.848 1289 2646 W RecoverySystem: !!! REBOOTING TO INSTALL /cache/bueller-ota-51.1.0.1_user_510055620-signed.bin !!!

Luxferro said:
I don't think you can yet, unless rooting enables it, since you can't read/write to /cache/. On the root of the /sdcard/ partition is a logcat.txt file (pull it via adb) that shows the initial update process. URL of the update, along with where it's stored and where the recovery expects to find it.
Code:
04-04 08:46:33.848 1289 2646 W RecoverySystem: !!! REBOOTING TO INSTALL /cache/bueller-ota-51.1.0.1_user_510055620-signed.bin !!!
Click to expand...
Click to collapse
you can adb sideload this file its a normal zip file

Amazon OTA certificates
Amazon OTA certificates

very good
very good：好：：好：：好：：好：

iNT0XiC8D said:
http://amzdigitaldownloads.edgesuite.net/obfuscated/e6f65fefb36aaf7b94fd370f516b9c11/bueller-ota-51.1.0.1_user_510055620-signed.bin
-iNT0XiC8D
Click to expand...
Click to collapse
Please add this to the OP, this is the 51.1.0.2 update
http://amzdigitaldownloads.edgesuit...ueller-ota-51.1.0.2_user_510058520-signed.bin

How to install both the firmware? Please tell me.
How to install both the firmware? Please tell me.

The fire tv will do it automatically upon boot when connected to internet.

evilracer123 said:
Amazon OTA certificates
Click to expand...
Click to collapse
Sorry for waking up this old thread but for what are theese certificates usefull?
Greetings by Idijt