MIUI PORTUGAL V4 - 2.9.29.1 (Base GenoKolar) - Huawei Ideos X5 U8800

IDEOS X5 v2.9.29.1 - http://www.miuiportugal.pt/pages/ICS/#all (147.18 MB)
- Almost full translation of this to Portugal PT
- Native Theme is MIUIPT V4 - 1.4
- Camcorder fix (it used to crash while opening)
- Centered watch in the status bar
- GPS functional
Knowed bugs:
- PIN Bug
- Screen rotation in SMS (problem with the release)
- Compass calibration
- Additional Settings (ex-X5 Settings) still on trial mode
- Memory leak
Waiting for the release of the new Geno´s kernel to correct some native bugs of the ROM Dev for our IDEOS X5.
For a clean install follow this steps:
(For your safety, do all the recommended backups, and don´t forget your IMEI)
1 - Boot em recovery
1.1 - wipe data / factory reset
1.2 - wipe cache partition
1.3 -advanced -> Wipe Dalvik Cache
1.4 - mounts and storage -> format /cache
1.5 - mounts and storage -> format /system
1.6 - mounts and storage -> format /data
1.7 - advanced -> Reboot Recovery (objective, flush and refresh)
...rebooting recovery...
1.8 - install zip from sdcard -> choose zip from sdcard -> miuiportugal_u8800_2.9.29.1_AIO_Signed.zip
1.9 - Once the installation finishes - reboot system now.
2 - First boot
2.1 - Security folder -> Permissions -> Manage permissions ROOT -> ACTIVATE
2.2 - Native MIUI Market; download Superuser 3.2 -> install -> Install the new binaries, giving root permission when asked.
2.3 - Reboot
2.4 - Install Google Playstore through MIUI Market and thats it...
P.S. - For better memory management, you should use the SWAP function that is available through Settings-Additional
Credits for base development - GenoKolar
PT port - miuiportugal.pt
(I am just the news carrier. Credits of this ROM are due to msbomberman)

omg! anyone test this? look like it's stable and in RC3 already! :good: gj genokolar!

aweesoomee so lets try

So can i flash this over miui .35 kernel?
»»Sent From My U8800««

I think it's made by genokolar
lemonade747 said:
So can i flash this over miui .35 kernel?
»»Sent From My U8800««
Click to expand...
Click to collapse
Yes,but you must do all wipes

hello,
can i flash this rom over aurora?
thx in advance

Geolocation works? thats all i need to know!

jazzan0va said:
Geolocation works? thats all i need to know!
Click to expand...
Click to collapse
GPS works ok, but Network location doesn't work for me...

How is this in stability/bugs compaired to Aurora or CrazyMiui v4 ?
Sent from my U8800 using xda premium

Uff it is pretty bad. Crazy is better... It is geno's rom converted into portugal theme... I am using it but it has all the bugs like permissions problems, apps are flickering when moving, screen too sensitive, no google play (i did get it from chinese market)...
Sent from my U8800 using Tapatalk 2

Damn just when I thought it was something awesome to try out
Sent from my U8800 using xda premium

Thanks that's good to know
Sent from my U8800 using xda premium

well i have to say, that i dont have any of the problems, like permitions, flicker, etc. it is all working well here. i did get them on genos...
you can always try it out and see how it works for you...
Sent from my U8800

boss_y said:
Uff it is pretty bad. Crazy is better... It is geno's rom converted into portugal theme... I am using it but it has all the bugs like permissions problems, apps are flickering when moving, screen too sensitive, no google play (i did get it from chinese market)...
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
Permission works like that, not issue
»»Sent From My U8800««

2.9.29 is obsolete / new 2.9.29.1 Release at MiuiPortugal
I am not that active here at XDA mostly because I am moderator/tweaker/modder at MiuiPortugal
The 2.9.29 pointed at the first post on this thread was still related to the first RC's I compiled based on Geno's Miui (just like CrazyGamer)... With some help from turkish, russian and chinese miui members, I was able to get things working "almost" properly with 2.9.29.1, as I state on the official thread...
But future releases might improve performance and stability...
Kind regards
- Paulo Brito Costa -

As i saw your official thread is not in english so maybe you could start new thread here on xda with change log and we could help you out with testing.
Like i said on my earlyer post that were my issues and i did all the wipes. But anyway you did good work with it.
Sent from my GT-I9100 using Tapatalk 2

boss_y said:
As i saw your official thread is not in english so maybe you could start new thread here on xda with change log and we could help you out with testing.
Like i said on my earlyer post that were my issues and i did all the wipes. But anyway you did good work with it.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I just might... Since I have the miuiportugal_u8800_2.9.29.1_AIO_Signed.zip native portuguese (translation still under development but almost complete) and English... and of course chinese...
Kind regards
- Paulo Brito Costa -

What is different between this rom and geno miui v4 rom? Sorry but i dont know
»»Sent From My U8800««

for start i dont have any of the problems i had with geno v4,still somethings to get polished but it os very stable, fast and havent found any bug yet...
permitions works perfect, wifi very fast, 3g very fast also...
the 3d games are very fluid.
jusy saying its one of the best roms i have tried so far.
Sent from my U8800

Hevvy said:
for start i dont have any of the problems i had with geno v4,still somethings to get polished but it os very stable, fast and havent found any bug yet...
permitions works perfect, wifi very fast, 3g very fast also...
the 3d games are very fluid.
jusy saying its one of the best roms i have tried so far.
Sent from my U8800
Click to expand...
Click to collapse
The only problem is memory consumption, that for me is very, very high. Other than that, perfect!
Regards

Related

[ROM] B160 - New OC Kernel, Root, Wifi-tether

I take no responsibility for any harm that comes to your phone as a result of applying this mod.
Rom based on Official B160.
Features
Kernel from genolokar (available here), see note 1 below for overclocking info.
Rooted and latest SuperUser
Native froyo wifi tethering
WyContacts 1.2 and XDA Dialer 30.1 (turn to silence, blacklist, many other features)
CM 6.1 Email app and wallpapers
Launcher Pro 0.8.5
Some build.prop tweaks
Same enhancements that are claimed for B160 (better call quality, better wireless, better camera)
Installation will not format /data or remove apps from /cust. For some roms (unicom in particular) this will cause problems due to some incompatibilities, and will require a factory reset to function correctly.
BIG THANKS to genokolar for creating the new kernel
Requirements
Clockworkmod recovery (available here)
Should be compatible with all rom and cust versions, though as stated some will require a factory reset. Please post your findings.
Downloads
Complete rom with all fixes and 1.5Ghz kernel: http://www.multiupload.com/0HR8W3BMUR (updated 15/5/11)
Update with all fixes and 1.5GHz kernel http://www.multiupload.com/OISOHEHTDP
1.8Ghz Kernel (use above download to revert to 1.5GHz kernel): http://www.multiupload.com/T7C4N0Q1CQ
Installation
Copy update.zip to your sdcard
Boot to clockworkmod recovery
(Optional) Perform a full backup [see note 2]. After backing up reboot recovery (in the advanced menu)
Apply update from sdcard
After update is compete wipe dalvik cache (in the advanced menu)
Reboot to system. First boot will be slow as it rebuilds the dalvik cache so be patient, successive boots will be back to normal.
(Optional) If everything is fine delete the backup from step 3 and if you like do another backup
Notes
By default the kernel is set to the default cpu governor and clock speed. If you would like to overclock I suggest using setcpu (available here)
Be aware that after applying this you won't be able to restore the full backup unless you either revert to the original rom, or change the boot image. The purpose of the backup is instead to have a backup of /data just in case something goes wrong.
Not good with CUSTC205D001 Finland Elisa, swype force closes constantly
That's a shame, can you try deleting libswypecore.so from /system/lib ?
Great rom. My phone has no problems with 1.5ghz launcher pro is an awesome inclusion I l love the sideways home screen.
Sent from my IDEOS X5 using XDA App
When first boot takes over 30min what do you recommend?
EDIT: Power Cycle did the trick. I did a batterystats wipe and fixed permissons before first boot maybe thats why it hanged. I upgraded from general to stockwells 136 and then this.
Thanks for this great ROM!
The only thing I noticed is that the camera has bad colors. Can somone confirm?
Thanks!
Sent from my IDEOS X5 using Tapatalk
Colors are fine here
Sent from my u8800
Hmm, will try a new installation ....
Sent from my IDEOS X5 using Tapatalk
what when it reboots always?
Market appears to be broken now.
Edit - Looks like it had more to do with my crappy internet situation at the time than anything else. Market is working.
rikobiff said:
Hmm, will try a new installation ....
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
Noop, must go back to stock...
it often freezes now.
which cpu Frequenz is the best?
Sent from my u8800 using XDA App
levibuko said:
it often freezes now.
which cpu Frequenz is the best?
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
I use stock with smartass governor.
levibuko said:
it often freezes now.
which cpu Frequenz is the best?
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
Mine was freezing when running at 1500, tuned it down to 1200 and working like a charm so far
My phone won't sleep after flashing this... Did a backup before flashing, but a restore won't help. Suggestions?
How do I go back to stock ROM?
blup1 said:
My phone won't sleep after flashing this... Did a backup before flashing, but a restore won't help. Suggestions?
How do I go back to stock ROM?
Click to expand...
Click to collapse
Did you try a factory reset?
Working Great, Thanks
camera wrong color
rikobiff said:
Thanks for this great ROM!
The only thing I noticed is that the camera has bad colors. Can somone confirm?
Thanks!
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
same camera problem here, will a factory reset fix it,thx
wmi543 said:
same camera problem here, will a factory reset fix it,thx
Click to expand...
Click to collapse
Sorry, looks like I included the wrong camera libs. This should fix things up.
http://www.multiupload.com/T0VX44J523
stockwell said:
Sorry, looks like I included the wrong camera libs. This should fix things up.
http://www.multiupload.com/T0VX44J523
Click to expand...
Click to collapse
What's the procedure we should use for updating?

ROMs reviews

Hello again, X8 users!
As there are many messages from people, willing me to start this thread, I''ll do it.
The fact is, that there are people, who don't have an opportunity to try the most interesting roms because of the traffic or time, and they want to know if it worth to be used or not.
So I have some reviews of the roms, showing it's main features and if something doesn't work properly
As my youtube channel specializes in latest custom ROMs from our dear developers and latest interesting apps, I'll post here these reviews, as many people don't know about them.and answering questions.I''ll try to take the most popular ones and post them.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------
And here is the list, what DisasteryMR has now:
First of all look this video, if you don't understand how to install custom roms and updates:
http://www.youtube.com/watch?v=K8-TuEDFo3Q
1) 2.3.3 GingerBread CM7.0 RC4 v.007 by jerpelea
http://www.youtube.com/watch?v=uJn4kQqiDIs
2) 2.2.1 Nexus ROM v.1
http://www.youtube.com/watch?v=4s7rRwPCaQk
3) 2.3.3 GingerBread Sense by racht
http://www.youtube.com/watch?v=XyulxeVMLhs
4) 2.2.1 Floyo v.20 by racht
http://www.youtube.com/watch?v=CIdbSA9ZzCQ
5) 2.1 Eclair W8 Stock ROM with fixes
http://www.youtube.com/watch?v=HaMmfNjbofM
6) 2.2.1 FroyoBread by doixanh
http://www.youtube.com/watch?v=XDqSN7t15Y4
7) 2.3.4 GingerBread kuyaDROID by kuyagaol
http://www.youtube.com/watch?v=75iALNVfveQT
8) 2.3.5 GingerDX by doixanh
http://www.youtube.com/watch?v=CyoT3vzsavg
Enjoy and choose the ROM,which is more suitable for you. Regards from me=)​​
If u have any suggestions - post your replies here.
Have a look at the V2 version of the Nexus For X8.
so cool
have you any suggestions to install a file manager or etc to access SD in GingerSense?
I've tried it, but it isnt much better then the first one, su reboots have place to be, nothing special.
Disastery said:
If u have any suggestions - post your replies here.
Click to expand...
Click to collapse
Hi Disastery
Just saw your you tube video for 2.3.3 gingerbread sense. Is there any internet connectivity / data through mobile network yet??
Please include MiniCM6 1.0.0 by ponanovn. thanks
In your video* Floyo 0.20 how u moved ur app to sd? And how u install angrybirds? I use Floyo 0.20 too but cant move to sd and install angrybirds -.-"
*
You can try wiping cache and if this doesnt work try downloading the .apk file ( google it) install the apk and then uninstall the app and then it should work
Hi, can you tell me wich version of Doodle Jump you got, and also can you pm a link where you got it ? Thanks.
Do review Srom-2.2.1FloyoX8-V2 by zousoum96&stelios97 or ill call you cheating.
I post only the most interesting roms, srom rom is a copy of minicm, so I don't think that it's neccessary to do it.
I guess it would be better if UI was in english, and it ain't really a review, rather showcase. Would be better if you actualy talked about the rom rather then just sliding through menu and opening apps.
But I like the overall idea. Thanks for taking time a showing us custom roms
my2c
anasjambu said:
In your video* Floyo 0.20 how u moved ur app to sd? And how u install angrybirds? I use Floyo 0.20 too but cant move to sd and install angrybirds -.-"
*
Click to expand...
Click to collapse
I use floyo 020 too..., to move app to sd .., go to setting , manager application., choice what app u want move.., click move to sd card ,not yet.., click again move to sd , click twice..
Sent from my X8 using XDA App
I have Elinux its a now complete rom. Fast smooth hd games works great
Sent from my X8 using Tapatalk
It would be better, I know. But I'm Russian, so there are a lot of people from many countries, who watch me, so it would be more convinient to show the roms and do some annotations...
link to 2.3.3 sense??....
i verry like....
grettings....
language question
Is it true that all 2.2 ROMs have got english language? I mean what languages have got 2.2 ROMs? English is OK, but I want my language in it. Is it possible?
(the other thing is a rumor that states all 2.3-s contains my language too, not just english. How is it possible?)
Thanks in advance.
I like 2.3.3 GingerBread Sense by racht ROM which look the best as I am a sense lover
http://www.youtube.com/watch?v=K8-TuEDFo3Q
This video is specially for those people, who don't understand how to use custom romS and how to use xrecovery itself.

<POX> [Official] thread for ROM problems and questions ;-)

Hi all! I created this thread because my PM inbox is flooted with questions and reported bugs in our (GM) ROM! so if you cant post on dev-section use this instead of PM'ing to me ;-) you can also report your problems here if you have over 10 posts so ask questions, report problems and enjoy our POX!
Partitions and some bug
I am on pox 1.0 non oc. Has tested 1.o beta OC., had too much battery drain so preffering non oc. Now want to upgrade to 1.1 non oc. Can you post some clarity about partitions. I have ext4 and swap partition on my SD card. Changelog for 1.1 says ext2 support for cache, so do I need ext2 partition, if yes what size. Moreover please confirm Email clint on 1.1 b'coz didnt find any in 1.0. Also please check that the times tends to reset (to GMT) in 1.0 on restart if automatic updating from serbvice provider is unchecked.
vinayvasudev said:
I am on pox 1.0 non oc. Has tested 1.o beta OC., had too much battery drain so preffering non oc. Now want to upgrade to 1.1 non oc. Can you post some clarity about partitions. I have ext4 and swap partition on my SD card. Changelog for 1.1 says ext2 support for cache, so do I need ext2 partition, if yes what size. Moreover please confirm Email clint on 1.1 b'coz didnt find any in 1.0. Also please check that the times tends to reset (to GMT) in 1.0 on restart if automatic updating from serbvice provider is unchecked.
Click to expand...
Click to collapse
think greenmods forgot his own thread
greenmods pls reply
I flashed pox 1.1 non oc over pox 1.0 non oc. found some bugs. after using theme changer to change theme, sd card scanning starts. the scan process takes upto 45 mins to compete
phone resets to russian lang after application of new theme
vinayvasudev said:
think greenmods forgot his own thread
Click to expand...
Click to collapse
Just very very busy
Sent from my GT-I5800 using XDA App
CWM Recovery
I m making my own custom rom and want to add cwm recovery, how can i do this? please help.
Mohanshbhr said:
I m making my own custom rom and want to add cwm recovery, how can i do this? please help.
Click to expand...
Click to collapse
Pauri did that, so ask him ;-)
Sent from my GT-I5800 using XDA App
How to use pox themes
Pox themes force closes how to use it.
Mohanshbhr said:
Pox themes force closes how to use it.
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showpost.php?p=13681276&postcount=365
miui was force closing again and again,anyways i don't like it so i removed it but what's the music player.apk file in system apps???
its not the stock music player,is it??
can i remove it??
and how much is the default free memory we get??
[email protected] said:
miui was force closing again and again,anyways i don't like it so i removed it but what's the music player.apk file in system apps???
its not the stock music player,is it??
can i remove it??
and how much is the default free memory we get??
Click to expand...
Click to collapse
for me MIUI music works good and nobody else has confirmed this problem?
i dont have those apk´s in my /system but yes you can remove them
+30 mb free memory in /system
jazux said:
for me MIUI music works good and nobody else has confirmed this problem?
i dont have those apk´s in my /system but yes you can remove them
+30 mb free memory in /system
Click to expand...
Click to collapse
my bad it is sondplayer.apk and not musicplayer.apk
BTW i just removed a few apps and i got 57mb free
[email protected] said:
my bad it is sondplayer.apk and not musicplayer.apk
BTW i just removed a few apps and i got 57mb free
Click to expand...
Click to collapse
yes i ment that in 1.2 there will be +30 mb
is ur sd card inserted for miui? Without sdcard it fc with me
Can't post, that's why I'm posting here. My new custom rom is coming soon, it will solve ALL the problems (no, seriously it will be good )
jihaa said:
Can't post, that's why I'm posting here. My new custom rom is coming soon, it will solve ALL the problems (no, seriously it will be good )
Click to expand...
Click to collapse
What? Seriously why are you posting this on our (GM) ROM thread? This is only for POX problems! Not to advertise new custom ROM! And we are also solving these problems
Sent from my GT-I5800 using XDA App
Check out my guide and my ROM - designed to be problem-free!
http://forum.xda-developers.com/showthread.php?t=1079052
jihaa said:
Check out my guide and my ROM - designed to be problem-free!
http://forum.xda-developers.com/showthread.php?t=1079052
Click to expand...
Click to collapse
DUDE!!!??! Why are you advertising your rom in this thread??? STOP!!!!!
Sent from my GT-I5800 using XDA App

[ROM] COUNTACH (based on B540, root, OC, supercharger, no FPS limit)

This rom is based on the official firmware B540, so android's version is 2.3.5. This is a rooted version of the B512 fw with many tweaks and improvements.
To install this rom you firstly need to upgrade to the official 2.3.5 fw (be careful: update to B512, not to B540). Then you need root permissions and the CWM recovery.
These are the links where you can find the HOW-TOs:
update to stock 2.3.5 http://forum.xda-developers.com/showthread.php?t=1326525
root http://forum.xda-developers.com/showthread.php?t=1326525
recovery http://forum.xda-developers.com/showthread.php?t=1343276
DOWNLOAD: COUNTACH ALPHA2
even if the rom is named as alpha (because it is new and iy needs more tests), it is really stable and optimized for every-day usage.
ROM's SPECs
Based on official B540
Root + Superuser (updated to latest version)
Busybox (updated)
Nano txt editor
Init.d support
Battery tweak
SD speed tweak
AutoZipalign on boot
FPS limit removed and now set to 55 FPS
Build.prop tweaks
Particles green bootanimation
Custom kernel by geno
Overclock
Added: no frills CPU, anreboot, root browser, terminal emulator
Supercharger by zeppelinrox
Turbocharger by zeppelinrox
KickassKernel by zeppelinrox
Battery Calibrator by zeppelinrox
Installation
Reboot in CWM recovery
Wipe cache
Wipe data
Wipe dalvik cache
Format System
Copy the zip on the sdcard
Flash the zip
Reboot
HOW TO USE SUPERCHARGER, TURBOCHARGER, KICKASSKERNEL AND BATTERY CALIBRATOR
mount the "/" and the "/system" as rw
open the terminal emulator
type sudo, then enter to grant root permissions
type supercharger, turbocharger, kernelizer or battery to open the script that you want to use
Thanks to:
zeppelinrox http://forum.xda-developers.com/showthread.php?t=991276
genokolar
zsmonkey
paul milbank
Hi,
thank you for this work!
Anyway I have to ask you something about your custom rom.
Does your Rom have the quick settings widget in the status bar?
Did you fix the accelerometer problem? For example if you try to move on the street view (of Google Maps) with the compass mode, you understand that the accelerometer has a problem.
Can you explain what problems you solved from the stock 512 Gingerbread 2.3.5 rom from Huawei?
Thank you in advance,
regards,
kalo
matteof93 said:
I am really happy to open this thread about my first custom rom for u8800pro.
This rom is based on the official firmware B512, so android's version is 2.3.5
THE ROM WILL BE AVAILABLE FOR DOWNLOAD THIS AFTERNOON, JUST WAIT 6/7 HOURS
ROM's FEAUTURES:
Root
Busybox
Nano txt editor
Init.d support
Build.prop tweaks
Init.d scripts
Custom bootanimation
Custom kernel by geno
Overclock
Fps unlocked
Added: no frills CPU, anreboot, qqlauncher
Removed many apps
Installation:
Go in recovery
Wipe data, cache, dalvik
Format System
Flash the rom
reboot
Inviato dal mio U8800Pro usando Tapatalk
Click to expand...
Click to collapse
congratulations.
are you built it from source code?
kalo86 said:
Hi,
thank you for this work!
Anyway I have to ask you something about your custom rom.
Does your Rom have the quick settings widget in the status bar?
Did you fix the accelerometer problem? For example if you try to move on the street view (of Google Maps) with the compass mode, you understand that the accelerometer has a problem.
Can you explain what problems you solved from the stock 512 Gingerbread 2.3.5 rom from Huawei?
Thank you in advance,
regards,
kalo
Click to expand...
Click to collapse
the rom doesn't have the quick setting widget...but the current release is only the aplha0.
i have just tried with an app called "accelerometer test" if the accelerometer works but seems that it doesn't.
from stock B512 i have not solved any problem because, using it for a month, i have not found any kind of problem. mainly i have edited the build.prop and i have added some scripts to improve performance.
zsmonkey said:
congratulations.
are you built it from source code?
Click to expand...
Click to collapse
no, i have simply extract the system.img using dsixda kitchen and i have merged it with the boot.img which i obtained through the pink screen.
Propably,i cannot flash it over rooted 2.2.2 stock rom.......
Maybe i have to upgrade first to flash this.....am i right or wrong???
Edit: btw,congrats for your first rom here,,and i hope to see more...
Sent from my U8800 Pro using xda premium
gkalenis said:
Propably,i cannot flash it over rooted 2.2.2 stock rom.......
Maybe i have to upgrade first to flash this.....am i right or wrong???
Edit: btw,congrats for your first rom here,,and i hope to see more...
Sent from my U8800 Pro using xda premium
Click to expand...
Click to collapse
yes, you must upgrade to official 2.3.5 (B512) because basebands are different.
ps: this is not my 1st rom, i made 2 roms for O1
matteof93 said:
yes, you must upgrade to official 2.3.5 (B512) because basebands are different.
ps: this is not my 1st rom, i made 2 roms for O1
Click to expand...
Click to collapse
I know well your work,cause i own an O1 p500,,,,,but i don't use anyone cause i didn't wanted to change baseband with lgtool and i stay with mik's rom....and btw for O1 there are plenty of good roms to use.......
PS...i made a lot of changes on 3 weeks which i own u8800 pro and i made a really fast and fully functional stock rom 2.2.2,,,,i delete about 14 system apps ,edited build.prop,created init.d folder,some other modds and a little theming,,,,and i like it very much ........maybe i create a thread and a video to saw people how good stock rom can be made......
As you understand it's very difficult for me to change baseband,as i still couldn't found a way to downgrade again if i don't like the new baseband.......and i want to have my fm radio not loose it.....
Someone must cook a rom for .32 kernel(old baseband)
Sent from my U8800 Pro using xda premium
Really nice, we need good developers for the u8800pro
E poi sei anche italiano, quindi siamo a cavallo... Hahahaha =P
update: the accelerometer should work....but sometimes it doesn't work, to make it working just reboot the phone
i try to port yr rom to my device, in huawei family, its a u9000 ideos x6, but i stuck at android green fire animation, i use .35 kernel. should i format a system? worry to do that, if i not mistaken, system will be formatted automatically when we flash new custom rom, bcoz we gv that command in updater script. what else modification should i do?
Sent from my SH8188U using xda premium
zukriaksah said:
i try to port yr rom to my device, in huawei family, its a u9000 ideos x6, but i stuck at android green fire animation, i use .35 kernel. should i format a system? worry to do that, if i not mistaken, system will be formatted automatically when we flash new custom rom, bcoz we gv that command in updater script. what else modification should i do?
Sent from my SH8188U using xda premium
Click to expand...
Click to collapse
use libril-qc1.so from your stockrom
matteof93 said:
use libril-qc1.so from your stockrom
Click to expand...
Click to collapse
u mean ril file can effect the booting process?
Sent from my SH8188U using xda premium
zukriaksah said:
u mean ril file can effect the booting process?
Sent from my SH8188U using xda premium
Click to expand...
Click to collapse
yes, because librilqc-1.so links the kernel to the hardware
matteof93 said:
yes, because librilqc-1.so links the kernel to the hardware
Click to expand...
Click to collapse
still stuck at android green fire, im using both .35 kernel frm stock & frm andro-id latest rom. any other files i need to replace?
Sent from my SH8188U using xda premium
zukriaksah said:
still stuck at android green fire, im using both .35 kernel frm stock & frm andro-id latest rom. any other files i need to replace?
Sent from my SH8188U using xda premium
Click to expand...
Click to collapse
please open a new thread...you can't use this thread to ask something about your porting.
matteof93 said:
the rom doesn't have the quick setting widget...but the current release is only the aplha0.
i have just tried with an app called "accelerometer test" if the accelerometer works but seems that it doesn't.
from stock B512 i have not solved any problem because, using it for a month, i have not found any kind of problem. mainly i have edited the build.prop and i have added some scripts to improve performance.
no, i have simply extract the system.img using dsixda kitchen and i have merged it with the boot.img which i obtained through the pink screen.
Click to expand...
Click to collapse
I try to make a rom for 2.2 but i don't have the original stock rom (2.2.2),and also i can't find it anywhere,,,,, ,i tried with a nandroid ,but my first attempt ,,installation aborted ,,error 107,,,,,
Any help ............
Sent from my U8800 Pro using xda premium
gkalenis said:
I try to make a rom for 2.2 but i don't have the original stock rom (2.2.2),and also i can't find it anywhere,,,,, ,i tried with a nandroid ,but my first attempt ,,installation aborted ,,error 107,,,,,
Any help ............
Sent from my U8800 Pro using xda premium
Click to expand...
Click to collapse
you need the boot.img from your phone (get it using the pink screen mode) and the stock update.app (the bigger one).
then extract the update.appusing dsixda kitchen, copy the system.img from working folder to original update and cook your rom.
matteof93 said:
you need the boot.img from your phone (get it using the pink screen mode) and the stock update.app (the bigger one).
then extract the update.appusing dsixda kitchen, copy the system.img from working folder to original update and cook your rom.
Click to expand...
Click to collapse
I took boot.img from cust_backup folder using root explorer,,,it's not the same thing?? do i have to take it from pink screen??
Anyway,i'll try pink screen mode,hoping to found the "update.app ",,because i think i don't have it (you know that i don't ever use pink screen yet,,,,,all modds i made,did it with root explorer)
Thanks a lot for replying
Sent from my U8800 Pro using xda premium
gkalenis said:
I took boot.img from cust_backup folder using root explorer,,,it's not the same thing?? do i have to take it from pink screen??
Anyway,i'll try pink screen mode,hoping to found the "update.app ",,because i think i don't have it (you know that i don't ever use pink screen yet,,,,,all modds i made,did it with root explorer)
Thanks a lot for replying
Sent from my U8800 Pro using xda premium
Click to expand...
Click to collapse
get it from cust backup is correct.
Then you can get the update.app from a stock firmware
Inviato dal mio U8800Pro usando Tapatalk
Great rom. Works flawlessly on my Impulse 4G

[Q] problem loading widgets on reboot

hello again
when i (re)boot my phone all previous created widgets disappear (with sslauncher) or show a loading error message (with go launcher)..
is there a way to resolve this problem?
i use official rom v2.3.5
kernel 2.6.35.7-perf
Don't move them to sd.
Sent from my ragelis
bronxitas said:
Don't move them to sd.
Sent from my ragelis
Click to expand...
Click to collapse
the apps? i didn't.. i used to have that problem in Colornote when i moved it to sd.. but now i have the problem with all widgets (in sd or filesystem)
Make sure whichever launcher you are using is not on the SD card. I had the same problem with go launcher as soon as I moved it to my SD. I moved it back to phone and haven't had the problem since.
This is a bug of official 2.3 roms(I had it in all). Fortunately it' s not happen to everyone. Unfrortunatley we don't know what it triger it, and huawei never tried to find a solution(I've reported them from first 2.3 beta). I've found a way to solve it(in fact just to improve the situation, because it' s keep coming from time to time and needed to do it again). Basically is a command, which reinstall all apps, here is the link:
http://mdzlog.alcor.net/2010/01/31/fix-broken-android-permissions-by-re-installing-apps/
dancer_69 said:
This is a bug of official 2.3 roms(I had it in all). Fortunately it' s not happen to everyone. Unfrortunatley we don't know what it triger it, and huawei never tried to find a solution(I've reported them from first 2.3 beta). I've found a way to solve it(in fact just to improve the situation, because it' s keep coming from time to time and needed to do it again). Basically is a command, which reinstall all apps, here is the link:
http://mdzlog.alcor.net/2010/01/31/fix-broken-android-permissions-by-re-installing-apps/
Click to expand...
Click to collapse
I am using ics, but I'll leave the post to the ones with problems: )
Sent from my U8800 using xda app-developers app
You don' t mention this on your first post, instead you said:
i use official rom v2.3.5
kernel 2.6.35.7-perf
It' s strange though because I had this problem with all 2.3 official roms(and I have try all of them), but never on a custom rom, and for sure not on aurora & elora ICS which I've used for a long time.
Maybe thats because custom roms don't use stock launcher?
Sent from my ragelis
dancer_69 said:
You don' t mention this on your first post, instead you said:
i use official rom v2.3.5
kernel 2.6.35.7-perf
Click to expand...
Click to collapse
my post is from February!
Sent from my U8800 using xda app-developers app

Categories

Resources