Database Users

oldrom to stock(odin) to newrom 10min flat

i dont think this has been posted if so let me know and i will retract this.It is just i think the quickest way to get to a new rom while flashing back to stock first.
disclaimer:this is for people that know what im talking about. If something happens to your phone it jumps off a cliff and laughs at you or anything else i am not responsible.
alrite as usual you should have already backed up all your apps, have your new rom on your internal sd card, and odin up and ready before this.Alright so here it is i have 3 button combo working on mine if you dont use adb i guess.
Pull battery insert battery hold volume up and down and put in cable from computer to phone download mode.It should pop up press start on odin. Now wait for it to say reset then wait for the boot animation of the signal bars right when those pop up before the sound even. Now pull battery insert battery hold up down and power button untill att pops up twice.Then select reinstall packages (this is if you already have the update.zip on your sd card for cwm if not dont bother) it will reinstall clockwork mod recovery (sometimes you have to push reinstall packages twice it just depends). Almost done now just do as normal install zip from sd card select the rom of your choice and then yes(install whatever rom your wanting to flash ) then bam your done no needing oneclick root dl rom manager instal cwm from there no need to even look at it...
and there you go done in 10 min i do this everytime and have never had any issues EVER im just trying to make flashing a new rom quick and easy and id love to hear your feed back

shadowscreation said:
i dont think this has been posted if so let me know and i will retract this is just the quickest way to get to a new rom while flashing back to stock first
disclaimer:this is for people that know what im talking about if something happens to your phone it jumps off a cliff and laughs at you or anything else i am not responsible
alrite as usual you should have already backed up all your apps have your new rom on your internal sd card and odin up and ready before this so here it is i have 3 button combo working on mine if you dont use adb i guess
pull battery insert battery hold volume up and down and put in cable from computer to phone download mode should pop up press start on odin wait for it to say reset then wait for the boot animation of the signal bars right when those pop up before the sound even pull battery insert battery hold up down and power button untill att pops up twice select reinstall packages (this is if you already have the update.zip on your sd card for cwm if not dont bother) it will reinstall clockwork mod recovery then (sometimes you have to push reinstall packages twice it just depends)now just do as normal install zip from sd card select the rom of your choice and then yes then bam your done no needing oneclick root dl rom manager instal cwm from there no need to even look at it
and there you go done in 10 min i do this everytime and have never had any issues EVER im just trying to make flashing a new rom quick and easy and id love to hear your feed back
Click to expand...
Click to collapse
Can you say: Run on sentences makes no sense.
Plus, wrong section

I agree. Some capitalization and punctuation would go a long way. Also, if speed is your goal then just drop the ROM zip on the sdcard, boot to recovery and install it.

opcow said:
I agree. Some capitalization and punctuation would go a long way. Also, if speed is your goal then just drop the ROM zip on the sdcard, boot to recovery and install it.
Click to expand...
Click to collapse
im talking about speed and the rom actually booting. I have done it that way a few times and most of those times at get failure at line watever update aborted this way has worked for me 99.99999999999999999999999999% of the time

shadowscreation said:
im talking about speed and the rom actually booting. I have done it that way a few times and most of those times at get failure at line watever update aborted this way has worked for me 99.99999999999999999999999999% of the time
Click to expand...
Click to collapse
Sorry to hear about your bad luck. It has worked for me 100% of the time.

That thing should have ended with:
"Posted using a broken older version of Swype while pressing the buttons with my face"
Comma. Semicolon. Space Bar. Enter key. Period. Pick one.
Hell.......pick a bunch.

evoic said:
"Posted using a broken older version of Swype while pressing the buttons with my face"
Click to expand...
Click to collapse
That's hilarious!
Thanks for the laugh while I'm stuck in morning traffic.

Thanks, I appreciate the info. I will try this. I had no problem understanding your post, and didn't even notice the lack of punctuation. I think punctuation is way over rated, and if you are a good reader you shouldn't need it. I threw in a few periods and comas so these Cretans could understand this.

My "10 min or so..." ROM Upgrade Guide
Backup apps/data using Titanium Backup
Remove all garbage folders from internal SDCard
Odin back to stock.
Insert <AWESOME ROM XX> onto internal SDCard
Use the update.zip for CWM when rebooting into recovery. (Reboot into recovery - run the update.zip - reboot again into CWM)
Install <AWESOME ROM XX>
Sign into Google and have it replicate contacts etc.
Restore Apps/Data using TiBu.
Usually takes a little more than 10 minutes due to backup/restore of TiBu - but the actual Odin/Install new ROM part takes under that.
But this isn't for those new to flashing - beware that this process can screw up forcing you to ODIN - and if you didn't keep a copy of your TiBu restore somewhere other than your Internal SDCard you'll be fubard.

avgjoegeek said:
My "10 min or so..." ROM Upgrade Guide
Backup apps/data using Titanium Backup
Remove all garbage folders from internal SDCard
Odin back to stock.
Insert <AWESOME ROM XX> onto internal SDCard
Use the update.zip for CWM when rebooting into recovery. (Reboot into recovery - run the update.zip - reboot again into CWM)
Install <AWESOME ROM XX>
Sign into Google and have it replicate contacts etc.
Restore Apps/Data using TiBu.
Usually takes a little more than 10 minutes due to backup/restore of TiBu - but the actual Odin/Install new ROM part takes under that.
But this isn't for those new to flashing - beware that this process can screw up forcing you to ODIN - and if you didn't keep a copy of your TiBu restore somewhere other than your Internal SDCard you'll be fubard.
Click to expand...
Click to collapse
@ avgjoe This is about it. But I would add one suggestion which will help out a ton with Odin.
[*] Ensure you have a good usb cable. Make sure to wiggle the cable. If the the phone loose connection to the pc while wiggling cable save your self 20 minutes and get a good cable.
I have 5 cables. Best to worse...
- 1 BlackBerry Cable ***** Best for me. I trust it. No connection loss
- 1 Stock Jabra Cable **** Worked good for me. No connection loss
- 1 Ericson Cable shaved *** Tight fit. No connection loss
- 2 Samsung stock cables* What was Samsung thinking
This is my experience. I remember the first time I flashed my Captivate. I felt sick and I blame it on my cable. I barely touched my phone and I heard the beep-beep from my pc when it detected the USB was detached and re-attached. Atleast bricking a Captivate is better than bricking a Tilt2.

An even faster ROM upgrade guide:
-Boot into CWM
-Wipe data and cache
-Install ROM zip from SD
If that fails, try again or:
-Odin one-click (or Odin to JH7 for certain batch 1010 Captivates)
-Enable debugging and sideload z4root. Permanent root.
-Install CWM using ROM Manager or manually with the update.zip
-Follow three steps above this section.
There is usually no need to go back to stock between flashes (and there are more serious risks [soft-brick, hard-brick, damaged bootloader] from a bad Odin flash than from a bad CWM install [fc's, stuck at boot logo]). Wiping your data and cache partitions (and making sure you disabled lagfix if not supported by the new ROM) should be sufficient.

avgjoegeek said:
My "10 min or so..." ROM Upgrade Guide
Backup apps/data using Titanium Backup
Remove all garbage folders from internal SDCard
Odin back to stock.
Insert <AWESOME ROM XX> onto internal SDCard
Use the update.zip for CWM when rebooting into recovery. (Reboot into recovery - run the update.zip - reboot again into CWM)
Install <AWESOME ROM XX>
Sign into Google and have it replicate contacts etc.
Restore Apps/Data using TiBu.
Usually takes a little more than 10 minutes due to backup/restore of TiBu - but the actual Odin/Install new ROM part takes under that.
But this isn't for those new to flashing - beware that this process can screw up forcing you to ODIN - and if you didn't keep a copy of your TiBu restore somewhere other than your Internal SDCard you'll be fubard.
Click to expand...
Click to collapse
It's a rather easy process, done it like 3 already. What I hate about going back to stock using Odin is that I always have to this:
Enable USB Debugging
Root the phone
Log in so I can use the market.
Download Rom Manager, Install CWM
Reboot to stock recover.
Apply package
Apply package again.
Install new rom
I wouldn't mind but the whole process until you are finally able to install the new rom takes at least 10 minutes of tapping and typing. It's rather annoying. I'm not complaining though...

avgjoegeek said:
My "10 min or so..." ROM Upgrade Guide
Backup apps/data using Titanium Backup
Remove all garbage folders from internal SDCard
Odin back to stock.
Insert <AWESOME ROM XX> onto internal SDCard
Use the update.zip for CWM when rebooting into recovery. (Reboot into recovery - run the update.zip - reboot again into CWM)
Install <AWESOME ROM XX>
Sign into Google and have it replicate contacts etc.
Restore Apps/Data using TiBu.
Usually takes a little more than 10 minutes due to backup/restore of TiBu - but the actual Odin/Install new ROM part takes under that.
But this isn't for those new to flashing - beware that this process can screw up forcing you to ODIN - and if you didn't keep a copy of your TiBu restore somewhere other than your Internal SDCard you'll be fubard.
Click to expand...
Click to collapse
It's a rather easy process, done it like 3 already. What I hate about going back to stock using Odin is that I always have to this:
[*] Enable USB Debugging
[*] Root the phone
[*] Log in so I can use the market.
[*] Download Rom Manager, Install CWM
[*] Reboot to stock recover.
[*] Apply package
[*] Apply package again.
[*] Install new rom
I wouldn't mind but the whole process until you are finally able to install the new rom takes at least 10 minutes of tapping and typing. It's rather annoying. I'm not complaining though...
Wiping your data and cache partitions (and making sure you disabled lagfix if not supported by the new ROM) should be sufficient.
Click to expand...
Click to collapse
Would it work if you install the rom, THEN, flash a kenerl that supports lagfix (without rebooting at all)?

Xstop said:
Can you say: Run on sentences makes no sense.
Click to expand...
Click to collapse
agreed. someone should start drinking decaf
sent from the midget in mah belly

cumanzor said:
It's a rather easy process, done it like 3 already. What I hate about going back to stock using Odin is that I always have to this:
Enable USB Debugging
Root the phone
Log in so I can use the market.
Download Rom Manager, Install CWM
Reboot to stock recover.
Apply package
Apply package again.
Install new rom
I wouldn't mind but the whole process until you are finally able to install the new rom takes at least 10 minutes of tapping and typing. It's rather annoying. I'm not complaining though...
Click to expand...
Click to collapse
you never have to log into your JF6 stock rom if you odin back to stock. you dont even have to boot to it. just keep the update.zip from CWM on your sdcard and boot into recovery...reinstall packages, and you are in CWM..flash your ROM, and enjoy

Nobody master clears anymore?? I do, and never have a single issue or FC. It just takes an extra five minutes to do the MC and then let the phone boot and transfer ROM of choise as well as update.zip for CW recovery to the root of my sd. But master clear is the same as a reset or a data wipe, so its not completely necessary. Just makes me feel safer!

silverslotcar said:
Nobody master clears anymore?? I do, and never have a single issue or FC. It just takes an extra five minutes to do the MC and then let the phone boot and transfer ROM of choise as well as update.zip for CW recovery to the root of my sd. But master clear is the same as a reset or a data wipe, so its not completely necessary. Just makes me feel safer!
Click to expand...
Click to collapse
nope. i never do any more. sometimes i have to flash back to stock, when i have a broken flash, but i still dont master clear. you dont actually gain anything by master clear, since it just wipes your internal sd...

>>[*] Log in so I can use the market.[*] Download Rom Manager, Install CWM
you can skip that step by simple "recycling/reusing" the recovery-update.zip from CWM. Download it once and then save it on your external sd and your pc.
When you want to use another ROM you can reuse the recovery-update.zip .
Just rename it update.zip and then reboot recovery and then do you thing.....

cumanzor said:
Would it work if you install the rom, THEN, flash a kenerl that supports lagfix (without rebooting at all)?
Click to expand...
Click to collapse
I've heard it's a bad idea to install kernels without first allowing the phone to fully boot. I've never tried it myself, I just convert to rfs without any backup or restore (using the ULF included in hardcore's Speedmod kernel) before flashing.

Stupid Questions
This is a stupid question (two actually). I think the answer is YES, but I'd like to make sure...
I've installed several ROMs by the "standard process."
Is the "update.zip" on my internal SD card the one that has cwm?
Does running "reinstall packages" from stock recovery just apply the "update.zip"?

Need help flashing CM ROM

I'm having trouble with my samsung vibrant (galaxy S) I want to flash CM on it. I have root access, Clockwork Mod recovery, and ROM Manager. I go in to ROM manager and select flash ROM from SD card, I select the CM ROM which I downloaded but it gives an error "Status 7" when trying to install, and will not flash the new ROM. Any help with this would be appreciated.

ok first go into clockwork recovery on rom manager and pick flash clockwork recovery and pick vibrantmtd then pick 3x NOT 2X! Then go to download rom and choose cm7 nightlie 8 or under as above have many probs. On ur nightlie choose all three! wipe data, wipe dalvik and backup rom. On ur second nightlie u just have to wipe dalvik and backup rom.

Thanks for the help. I tried that with a slight variation. I had to manually put the ROM on the root of the SD card and named it update.zip. I flashed clockwork recovery and selected 3.x as you said. I selected all 3 options for backup and wipe. Once in recovery I select "Reinstall packages" and it finds update.zip but aborts installation with "Status 7"

Ur doing it wrong. Update package is for only rooting ur phone.
Sent from my SGH-T959 using XDA Premium App

First root ur phone! Then follow my directions to get cm7
Sent from my SGH-T959 using XDA Premium App

the phone is rooted. Is there an easy way for me to double check that? Maybe I'm confusing two processes, but I do have the ROM on the SD card. Am I trying to apply it incorrectly? When I'm in recovery my only options are:
Reboot system now
reinstall packages
delete all user data
delete cache data
format internal SD-card
I'm used to see other option such as on my MT4G which has "install zip from SD card" That is what I typically use to flash a new rom.
Sorry if I'm missing something, but I do appreciate the help

I've been messing with it all night. I wound up doing the ODIN to JFD to get myself back to 2.1. I installed rom manager again, and it appears that when I tell it to flash clockwork mod and then reboot in to recovery I am actually going to stock recovery. I think the options that I listed earlier are for stock recovery as well. I think the main thing I'm missing is the "Install ZIP from SD Card" option in recovery. I guess at this point I'm unsure if I'm rooted, and don't know how to get the correct recovery so I can flash the ROM I'd like.

If ur recovery is blue then u need reinstall packages twice then u will be rooted, then it will turn green. Then go into rom manager and flash clock work recovery. Then put ur rom on internal sd and ur ready to flash. Enjoy
Sent from my SGH-T959 using XDA Premium App

Ok, so we can narrow things down a bit. My recovery is blue. I've downloaded the update.zip that I found from "NOOB Root guide" here on XDA, but no matter how many times I reinstall packages recovery never turns green.
I've also tried the one click root method which does the same thing as above but it just automates things a bit. (http://forum.xda-developers.com/showthread.php?t=739300)

Bump.
Many thanks to movieaddict who has helped so far, but it appears that I don't have root access, and the typical steps found in this thread are not working for me. Any other ideas?

ok is ur phone hardware locked?? by checking by doing this do the 3 button combo to get into download mode. First power off ur phone then plug in ur usb cable to phone and into pc then hold down the up volume and down volume and THEN hold down the power button and let go after a few sec u should see download mode.. If it goes into download mode then ur phone is not hardware lcked and we can go from there if it is hardware locked? then follow this link
http://forum.xda-developers.com/showthread.php?t=801722
if it isnt hardware locked then make sure update package file isnt corrrupted and make sure u put it on ur internal sd card. Make sure the update package is 632 kb sometimes when downloading stuff happens.
im gonna tell u how i do root and flash! First odin back to eclair must easier to root then. Second put the update package on ur internal sd card and dont unrar it leave it as is. Then turn off ur phone and hold down the up volume and the down volume and THEN the power button and as when u SEE THE vibrant logo let go of power button. Ur recovery will be blue then select reinstall package and select yes, it will then go through stuff and come back to recovery blue then do it again and it will turn green. Once its green then select the rom u want to flash and ur ready to go.

Thanks again. From your instructions I can tell that the phone is hardware UNlocked. I've previously gotten in to download mode. also, I see some differences in how you describe the root process. The update.zip is 633kb, I'll try to redownload it again... also, when I hit reinstall packages I am not prompted with yes/no, it just does it. It is a very quick process, and then it auto reboots the phone, but you said it should bring me back to recovery. I'm not sure why that would be happening
I'll mess around with this some more tonight. Hopefully I can nail this down. Sorry to be a PITA.

yah it should bring u back to green recovery after doing it twice! Yah that was my bad it asks u yes or no when flashing...lol!
Sent u pm!!!

Try Superoneclick root! That always works for me. When u reinstall packages and it reboots, clockwork usually has NOT been installed, I always Odin then install Tom Manager, flash Clockwork, then its off to the races!
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App

Sorry Rom Manager not Tom, lol
Sent from my Htcclay's SuperVibeCM7 using XDA Premium App

I've been going over the suggestions all night. I feel like I'm following the instructions... not that they are even that difficult. I get the update.zip on my sd card, I boot in to stock recovery (blue) I reinstall packages, the phone reboots in to normal boot mode, I reboot in to recovery and reinstall packages again. I repeat this process multiple times hoping that one of these times I'm going to see a green recovery. I know it's all smooth sailing from there. I even recorded a short clip of me doing this.
http://www.youtube.com/watch?v=RPreHj16UEU
Is it possible that i've tried so many different way of doing this that I have the phone in a weird state, and now these guides aren't working due to those previous attempts? I tried super1click... wound up getting an error "Getting mount path" ... "failed"

A simple way to check for root would be to download Terminal Emulator from the market and type in "su" without the quotations. If you get $ or permission denied you are not rooted. If you get a super user prompt followed by a # you should have root. Also which rom are you on now? If you are on stock Kb5 the recovery could be giving you some issues trying to flash the CWM recovery or at least for me it did. I suggest using ODIN to go back to JFD, then using super one click root (make sure your screen is set to not go off for the 10 or 30 minute time frame) I suggest this because I have had the "failure to mount" issues many times and it only seems to happen if my phone screen goes off while attempting the root. Once super one click completes, reboot your phone, install Rom manager, then reboot into recovery. You will have to select re install packages from there. The clockwork screen will be green as a few others have stated. I have attached an image below of clockwork, mine is orange since it's cm7 but yours will look similar,but green. From here just choose install from zip sd card, choose zip and flash away. Best of luck to you!
https://picasaweb.google.com/117659...?authkey=Gv1sRgCMbSsp7F4ZHWfg&feat=directlink

Is there something that removes the root access when you reboot the phone? I flashed the recovery for Galaxy S Vibrant (NOT Vibrant MTD) and was able to get to CWR (green), but sometimes when I go in to recovery it is back to blue... if I reinstall packages it takes me to green. Along those same lines I notice SU keeps asking me if the same application can have SuperUser permissions, so it seems like something is not sticking.

are you on 2.1 or 2.2? if you'r on 2.2 and use the update.zip it wont work you have to use superoneclick root ,happened to me too.

Thanks for responding. The phone was on 2.1 because I used ODIN to go back to JFD.
I've since sold the phone (didn't care for it much) and gotten a G2X (which I'm also not wild about). Thanks for all the help everyone!

Cant get Vibrant to start help plz!

Ok i was on ICS passion then all of a sudden my phone said something about encryption an that it had failed an only option was to reset phone so i hit reset then it went to recovery mode an green android came up with chest open then error message happened an so i booted in to recovery then i try to go in sd an it would not allow me to so i then tried to odin an flashed then i powered on it gies to vibrant screen then it just shuts off so i then flashed Eugene froyo that does not brick then it takes me to stock recovery an says an i cant click on anything in recovery can only move -- movi_checking done!...
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
Here are instructions i have followed an no luck http://forum.xda-developers.com/showthread.php?t=1043892
Ok I think you got some extra cache or some other piece of data that did not get wiped. either way, do this in this sequence and you should be ok
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Load the JFD rom for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine!
15. Then, root the phone and you can flash your new Rom.
doing this method will get everything back to normal and the phone will work just like it did right out of the box
It is #7 that is important when it reboots into recovery after froyo that does not brick then pull the battery and go back into download mode and flash the JFD, This will clear everything out and put you back into stock
Good luck

Got it started
I got it booted though a very hard process an now i cant get my sd card to mount it says when i go into anything media related it says "Your phone does not have a SD card inserted" an Externel dont mount either

Which sd card isnt working... internal sd, or external sd?

kf7strng said:
Which sd card isnt working... internal sd, or external sd?
Click to expand...
Click to collapse
Both of them aren't working

Jasonhunterx said:
Both of them aren't working
Click to expand...
Click to collapse
Don't use eugene's rom, since you were using an ICS rom follow these steps
flash froyo bootloaders
flash regular jfd and TICK REPARTITION ( ICS/CM7/CM9 change the partition layout and you need to flash correct partition table for stock rom to work )
back in bussiness.
http://forum.xda-developers.com/showthread.php?t=848737

jrafael said:
Don't use eugene's rom, since you were using an ICS rom follow these steps
flash froyo bootloaders
flash regular jfd and TICK REPARTITION ( ICS/CM7/CM9 change the partition layout and you need to flash correct partition table for stock rom to work )
back in bussiness.
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
it never booted on Eugene rom it just went to recovery an gave me an error the one time i got it booted was on 2.1 Stock all the phone does is go to vibrant screen then shut down an no boot loop just off it has done this before an i fixed but Sd was not working an first time apps worked but then 2nd time no apps worked besides browser messenger

Jasonhunterx said:
it never booted on Eugene rom it just went to recovery an gave me an error the one time i got it booted was on 2.1 Stock all the phone does is go to vibrant screen then shut down an no boot loop just off it has done this before an i fixed but Sd was not working an first time apps worked but then 2nd time no apps worked besides browser messenger
Click to expand...
Click to collapse
Hey Jason. I'm in the exact situation you're in. Loaded Passion for about 1 week, got the encryption screen and was forced to reset. Now my SD cards (internal and external) won't load. Have you found a work around for it yet? Cheers Mate.

nope nothing

either of you find a solution? Im having same issue

In the same boat
I am in the same boat. I was using the Euphoria ROM. Yesterday things slowed down on the phone. I rebooted a few times and it crashed. The last couple of times it told me about the encrypted data. That was when I tried to take it back to stock and it won't do anything now other than boot to the vibrant logo and shutdown. Searching for a way to odin a ROM/Kernel that has a CWM recovery so I can go in and manually format the SDcard.

Do what I did, sell it to someone as a wifi hotspot and buy yourself a hercules. You'll never look back
Sent from my SAMSUNG-SGH-T989 using XDA

BUMP
BUMP!
I have had a paper weight for three weeks now because of this partition issue.
there has to be a way to fix this.

webstas said:
BUMP!
I have had a paper weight for three weeks now because of this partition issue.
there has to be a way to fix this.
Click to expand...
Click to collapse
Try this one.
http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my Vibrant using Tapatalk 2

Webstas- Just out of curiousity, were you trying to mount your phone to your computer while on ICs when this happened? I have a theory that I believe I know why this is happening. Just need you to see if you remember a few weeks ago and if you had any problems mounting to your PC and then your next reboot you got the Ecnryption Error.

Woodrube said:
Webstas- Just out of curiousity, were you trying to mount your phone to your computer while on ICs when this happened? I have a theory that I believe I know why this is happening. Just need you to see if you remember a few weeks ago and if you had any problems mounting to your PC and then your next reboot you got the Ecnryption Error.
Click to expand...
Click to collapse
no i got up an took a shower then came back it gave me an encryption error then i odin back an more trouble odined a couple more times an now it boot loop an also wont start with eugenes froyo

I know it has been awhile but think back. Were you mounted to your PC at anytime between your last reboot and the Encryption Error? Doesn't have to be right before, the error gets throw on your "next" reboot. And as you know, reboots can happen manually or for something as simple as wrong UV settings.
Looking back in this thread, I saw that you got it to boot up. See if you can do that again and then mount your External via ADB and you should to push the proper commands then. Pretty much your internal is hosed, but me and a few others are working on that too.

Can't get it to boot it makes it to Vibrant screen an shut off an on Eugene"s froyo it gives me a couple of errors an I just can't get it to start anymore it there anyone who has encountered this an got it fixed like I really need this fix I am using a blackberry please save me

YAY
I got it fixed but now im on step 13 of that guide where you have to use ADB an i cant get the phone to show up on my PC what drivers do i need i already have Vibrant drivers but still nothing an the usb works its a samsung USB so can anyone help me with ADB

I am having a similar problem. Was running ICS 4.0.3 w/Euphoria without issue until this morning. Got a couple of errors after a normal recharge. Pulled battery and rebooted, but is stuck in boot loop. Cannot access either recovery or fastboot screen. Vibrant logo flashes and release buttons, but never enters mode. Then cycles to Android screen and would likely stay there until battery died. This is primary phone and need to put back into service quickly. Any assistance will be greatly appreciated. Thanks.
JIM in FLA

Go back to stock 2.1
Sent from my SGH-T959 using XDA

[Q] I9000 question

Hi all.
I have an Galaxy S - i9000 in front of me, which shows a fake IMEI eg. 0049xxxxxxxxxxx. There is no previous made backup of /efs content (nv_data.bin e.t.c.). Now the phone has the firmware 2.3.6 (baseband I9000XXJVU). Bluetooth is working fine, wireless is working, too.
I red many posts in the forum, but nothing specific, like (howto recover the IMEI on i9300 with QPST). Is there a similar tool like QPST? How can I recover the lost IMEI?

Whenever this happens to me i flash jvu thru odin or any other stock rom to get this back.
Sent from my GT-I9000 using xda premium

RuffBuster said:
Whenever this happens to me i flash jvu thru odin or any other stock rom to get this back.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer. I'll try it out.

I have flashed JVU through Odin, still nothing.
What will happen, if I restore a backup from another i9000 efs?
Thanks for the help.

nastee said:
I have flashed JVU through Odin, still nothing.
What will happen, if I restore a backup from another i9000 efs?
Click to expand...
Click to collapse
Try a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

similar problem... nothing helps until now
We bought a GT-I900 with Android 2.3.4 (I9000zsjpj).
We installed cyanomod 9 (stable mode), after initialization the device looks fine (probably), then we installed the Gapps and the device stopped working.
We tried to go back a version with the backup, and then we got color stripes...
At the end we were able to enter into download mode, with a dongle. And install GB and we upgraded to cyanomod 10 with the appropriate Gapps.
The phone "works", but he lost the IMEI, the home key does not work, no sounds (nither microphone) and no GPS.
Before the first installation we backup the EFS with Nitrality and we kept the folder outside the device, but the restore is not working.
We also tried to install JVU with Root, but it did not solve the problem.
Moving the nv_data.bin and/or nv_data.bak from the backup to the efs folder did not solve the problem (nv_data.bin.md5 and nv.log files does not exist in the backup or in the efs folders).
If anyone can help .....
xsenman said:
Try a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card, after flashing and reboot , insert them back
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu> Settings> Applications> Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, & KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3
Click to expand...
Click to collapse

orit said:
We bought a GT-I900 with Android 2.3.4 (I9000zsjpj).
The phone "works", but he lost the IMEI, the home key does not work, no sounds (nither microphone) and no GPS.
Click to expand...
Click to collapse
yup, read this and check your IMEI as to what phone you have.
I think you got conned with an M110S , so to solve your problem follow the above post guide.

xsenman said:
yup, read this and check your IMEI as to what phone you have.
I think you got conned with an M110S , so to solve your problem follow the above post guide.
Click to expand...
Click to collapse
That was a problem. TNX!!
I followed the instructions of the repair kit, but after the second stage it could not enter and stay in the DL mode, it enters without a problem to the DL mode, but after a few seconds switches to the recovery mode. (Battery fully charged). I can not keep it in DL for more than few seconds.
(Problem were solved- it did recognize theSIM, the home key, and the sounds are back.....).
Can I take those seconds and start the third stage flash via Odin or it sticking? There is another solution?
Or: is it really necessary to pass the third stage (if the phone works now)? Of course I want to upgrade the firmware version, and I'll need the DL mode for that too.

orit said:
Or: is it really necessary to pass the third stage (if the phone works now)? Of course I want to upgrade the firmware version, and I'll need the DL mode for that too.
Click to expand...
Click to collapse
go ahead and flash the WF07 gingerbread ROM , as currently you are on an Eclair ROM but try and follow the flashing procedure, to ensure a clean and safe flash.

xsenman said:
go ahead and flash the WF07 gingerbread ROM , as currently you are on an Eclair ROM but try and follow the flashing procedure, to ensure a clean and safe flash.
Click to expand...
Click to collapse
You advised me to start flashing the WF07 in the few seconds of the DL mode? It wond destroy the flashing?

orit said:
You advised me to start flashing the WF07 in the few seconds of the DL mode? It wond destroy the flashing?
Click to expand...
Click to collapse
hmm, did not get what you were saying, you said problem solved, so i assumed you had a working phone. must have misread your earlier post
so your download mode changes? is it rebooting into recovery mode by itself? or the the triangle man with spade changes from english to korean ?
if its rebooting , try using ADB or tools to boot into download mode use guide in My Android Solutions

xsenman said:
hmm, did not get what you were saying, you said problem solved, so i assumed you had a working phone. must have misread your earlier post
so your download mode changes? is it rebooting into recovery mode by itself? or the the triangle man with spade changes from english to korean ?
if its rebooting , try using ADB or tools to boot into download mode use guide in My Android Solutions
Click to expand...
Click to collapse
The download mode changes from english to korean (this does not bother me) and it is rebooting into recovery mode by itself (after few seconds in download mode). I'll try what you suggest.

orit said:
The download mode changes from english to korean (this does not bother me) and it is rebooting into recovery mode by itself (after few seconds in download mode). I'll try what you suggest.
Click to expand...
Click to collapse
Xsenman, TNX again.
Apparently the mistake was, of course, mine: I pressed the three buttons, as in I9000. By pressing only the home key+power, the download mode worked fine.
I installed the Say_cm7_0921.
It works fine, but for now the camera can not capture video (It crashes when I switch from stills to video). And I manage connecting to the computer only after instaling "auto mount your sd card" from the market.

orit said:
Xsenman, TNX again.
Apparently the mistake was, of course, mine: I pressed the three buttons, as in I9000. By pressing only the home key+power, the download mode worked fine.
I installed the Say_cm7_0921.
It works fine, but for now the camera can not capture video (It crashes when I switch from stills to video). And I manage connecting to the computer only after instaling "auto mount your sd card" from the market.
Click to expand...
Click to collapse
say CM7 is still not bug proof or stable yet, so use as is, , stable will be gingerbread versions

xsenman said:
say CM7 is still not bug proof or stable yet, so use as is, , stable will be gingerbread versions
Click to expand...
Click to collapse
I had gingerbread before all the problems, it has some problems in the Hebrew interface, that was the reason that I tried the CM7.
But the video camera does not wort, neither the bluetooth, gps and headphones. Although it has a cute interface (and the Hebrew works fine) I think I'll need to chenge it...

Few issues since rooting

Hi,
I have now rooted my phone and seemed to have removed the issue I was encountering. (IMS Framework)
However I have a few issues since rooting and am a bit unsure if what to do next
Any help to the following points is greatly appreciated. I am complete noob so only plain English and links to idiots guides please!
1) as a recent post states, I am also suffering from frequent restarts. They are quick restarts, only a few seconds (not like a hard reset etc) however there seems to be no specific reason or app causing it.
Posts suggest removing Knox might help?
I have a few root removal apps installed now so can someone tell me which Knox apps/programs can be safely removed???
2) when I press side button to unlock the phone, the screen sometimes freezes and doesn't respond. I have to press lock button again to lock, again to unlock then it works again
Not a major problem but annoying none the less
Any ideas??
3) I rooted to save battery by deleting the vodafone virus IMS framework however battery is still not as it good as it was before IMS framework. It doesn't drain within a few hours but again it's annoying.
Android system and OS are currently using more battery than the screen
So being a noob I'm. It sure where to go from here....
I've done a backup from nandroid manager app (in a cwm format it seems) and downloaded rom manager however CWM installer hasn't worked (something on the install guide says something about Samsung devices needing to install something but I can't find a guide on it)
(Please also confirm, the back up I did to external sd card has a few files including an md5 file, a few tar files and recovery img file. Is this correct? Is this the folder I would use to restore if I encounter issues later on??)
So I'm thinking I unroot and reinstall factory settings through kies etc (guide how to do this would be useful??!!)
Then root again and install a new rom (a nice clean one without the bloatware etc)
EDIT. IVE READ HOW TO INSTALL CWM FROM ODIN SO WILL TRY THAT.
QUESTION THEN BECOMES : WILL INSTALLING A CUSTOM ROM FIX POINTS 1,2 and 3????
Am I overthinking this or is there a quicker fix to my issues above?
Any help appreciated!!

1. If you have a custom recovery then flash knox removal script. Then you don't have to delete it manually. For example > http://forum.xda-developers.com/galaxy-s4/general/scriptknoxout-complete-brutal-knox-t2807172
2. Could be related to point 1.
Flash the script and it should solve most of your problems.
For your last question. There is no point in unrooting and using Kies if you want a custom rom. A custom rom will fix point 1, 2 and 3.

HELP!
so i install the Knox Zip (through teamwin)
Phone said "updating apps" then stuck on samsung screen.
Rebooted again.
Done multiple reboots through TWRP. Still same - stuck on samsung screen
I wiped data/factory reset but issue is still same.
I can get to the screen by holding down power volume up and home button but reboot not working.
I looked for restore but it is blank (i did a restore on SD but its not showing!!!)
I need help!

rootromnoob said:
so i install the Knox Zip (through teamwin)
Phone said "updating apps" then stuck on samsung screen.
Rebooted again.
Done multiple reboots through TWRP. Still same - stuck on samsung screen
I wiped data/factory reset but issue is still same.
I can get to the screen by holding down power volume up and home button but reboot not working.
I looked for restore but it is blank (i did a restore on SD but its not showing!!!)
I need help!
Click to expand...
Click to collapse
Either reflash the stock rom you are on
or
Flash a custom rom that you want.

Lennyz1988 said:
Either reflash the stock rom you are on
or
Flash a custom rom that you want.
Click to expand...
Click to collapse
Im guessing that has to be via Odin as there is no ROM file on my phone??
(or could i put a ROM on my External SDcard and flash via TWRP?)

rootromnoob said:
Im guessing that has to be via Odin as there is no ROM file on my phone??
(or could i put a ROM on my External SDcard and flash via TWRP?)
Click to expand...
Click to collapse
Stock ROM (download it on your pc) -> Flash it via ODIN
or
Custom ROM having it in your SDCARD -> Install it via TWRP (Custom Recovery)

Took a while messing around with sd card but managed to flash liquid smooth and all working
Annoyingly Odin didn't recognise phone but that's ill sort that out another time
Thanks for help