Does any one have a CWM backup of CM 7.2 laixadin?
I would like to test it out on my charm.
The update.zip does not work on my charm :s
Thanks
Related
Hey guys, was wondering about something,
I flashed CM7 from the CM/MIUI WIP thread using Clockwork 3 (booting Clockwork through fastboot instead of installing it), is it safe to nandroid back and fourth between CM7 and Sense using Clockwork 2.5 now that CM7 has been installed or will CW3 work just as well?
Thanks guys
I dont think it will work, You need to restore from cwm 3.0.0.5 as well.
hmm, it's not the end of world to swap between recoveries to make nandroid's.
only reason i would go back and fourth is because the camera is flaky in CM7, other than that everything is good (only other exception is GPS isn't working)
I've been trying to use clockwork mod backup so that I can try out roms and easily get back to my stable leedroid 2.2.3 setup.
So when trying out the sense v2.3 and cm7 roms, I did a clockwork mod v3 backup just before (after updating to it from rom manager so I can flash the gingerbread roms)
I haven't found a gingerbread rom yet that I like over my 2.2 setup, so I'm now trying to restore the backup. Even when using the full-wipe.zip and then the full restore with clockwork mod, I have a few issues:
1. The boot animation is not restored - Just have the stock android text.
2. Lots of issues when the rom boots - force closes of sense etc.
I thought the clockwork mod backup was supposed to do a bit-by-bit backup of all the partitions, so when restoring you should be back to exactly the same state. Yet clearly this is not true. Any ideas on how I can restore the backup, or do I need to start from scratch and restore my titanium backup?
I've had quite a few other issues with clockworkmod as well - like needing to use the full-wipe when clockworkmod claims it's already wiped those partitions. Seems to be quite buggy - is there an alternative recovery for the DHD? I know that CM is the standard but it seems to be not working very well at all.
LeeDroid said:
... To be flashed with CWM 2.xx.xx...
Click to expand...
Click to collapse
The problem might be there...
I've had these same problems moving between froyo roms with CWM 2.xx.xx . Also I didn't flash leedroid - I tried to restore a CWM backup, made with 3.x , using 3.x.
Yes but there has been some reports in the leedroid thread that backup and restore doesn't work with CWM 3.x.x.x, that's why 2.x.x.x is recommended in the OP.
Edit: Wrong forum. 6+ windows of XDA can confuse anyone. Sorry
Hello,
I would know if we can downgrade the Defy+ with the last Quarx's nightly with the custom kernel to install CyanogenMod 7.2 stable and if we can take (with a data backup in recovery of course) the data from the actual version of CM10 and restore on CM 7.2 stable without problem like bootloop ?
Thank you in advance
Backup your /data/app folder
You can copy /data/app to /sdcard to save your downloaded apks.
Not sure if they are going to work.
euros60 said:
Hello,
I would know if we can downgrade the Defy+ with the last Quarx's nightly with the custom kernel to install CyanogenMod 7.2 stable and if we can take (with a data backup in recovery of course) the data from the actual version of CM10 and restore on CM 7.2 stable without problem like bootloop ?
Thank you in advance
Click to expand...
Click to collapse
rafaelsoaresbr said:
You can copy /data/app to /sdcard to save your downloaded apks.
Not sure if they are going to work.
Click to expand...
Click to collapse
Thank but I know already the manipulation in order to do a backup and restore.
I try to downgrade to CM7.2 stable, there is the battery problem with "?" icon, I installed the battery fix for CM7 but I re installed my backup of CM10, in fact in my precedent question I did a fault : I would to downgrade from CM10 to my rom stock's backup before the installing of CM10.
So I try also to downgrade to my stock rom's backup, same problem with unknown battery I also had the battery fix but when I try to restore my CM10's data, the stock rom's recovery doesn't see the files for restore my data, it says "no file data in this backup, no .ext3 ..."
I think the older recovery doesn't recognize the file types of CM10 recovery.
Thanks for your response !
Cannot enter recovery mode
I also want to downgrade from quarx´s CM 10 to CM7.2 or 9, but i can´t access to recovery mode. I´ve tried the button combination, and the recovery mode in android, but none works. Is there any tutorial on how return to something like stock just to star all over?
Install 2ndinit
Try installing 2ndinit.
yne22do said:
I also want to downgrade from quarx´s CM 10 to CM7.2 or 9, but i can´t access to recovery mode. I´ve tried the button combination, and the recovery mode in android, but none works. Is there any tutorial on how return to something like stock just to star all over?
Click to expand...
Click to collapse
yne22do said:
I also want to downgrade from quarx´s CM 10 to CM7.2 or 9, but i can´t access to recovery mode. I´ve tried the button combination, and the recovery mode in android, but none works. Is there any tutorial on how return to something like stock just to star all over?
Click to expand...
Click to collapse
press and hold the power button->reboot->custom recovery,tested on PA using quarx build sep 24th
defyus3r said:
press and hold the power button->reboot->custom recovery,tested on PA using quarx build sep 24th
Click to expand...
Click to collapse
Can anybody describe how the downgrade procedure should be carried out?
Regards, TY
euros60 said:
Hello,
I would know if we can downgrade the Defy+ with the last Quarx's nightly with the custom kernel to install CyanogenMod 7.2 stable and if we can take (with a data backup in recovery of course) the data from the actual version of CM10 and restore on CM 7.2 stable without problem like bootloop ?
Thank you in advance
Click to expand...
Click to collapse
Yes you can downgrade, I did it yesterday only.
For the downgrade to CM9:
-Wipe Data /Fullwipe
-Install the Cm9 nightly you want (Step by step guide is here - http://forum.xda-developers.com/showthread.php?t=1795647)
-install Gapps
-Format Cache/Dalvik Cache
Regards,
Amit Sharma
Press thanks button if this post helped you all the best
I have a friend who has recently gottem a few scratch and dent Nook Colors, and I'm trying to help him install CWM and Cyanogen on them. I have CWM and Cyanogen 10.2, but I've been updating fro older versions, and haven't installed over stock in a while, so I'm trying to make sure I'm up to data eon getting the latest CWM and Cyangen ROMs installed.
So the situation is, if I have a Nook Color that is stock, and has already been rooted, can I install the CWM ROM Manager APK, use that to install the latest CWM image to EMMC, and then boot to CWM recovery and install whatvery ROM I choose, say Cyanogen 10.2? Will different versions of the Stock frimware make a difference?
This is the process I think will work, but its been a while.
Thanks
deamon_knight said:
I have a friend who has recently gottem a few scratch and dent Nook Colors, and I'm trying to help him install CWM and Cyanogen on them. I have CWM and Cyanogen 10.2, but I've been updating fro older versions, and haven't installed over stock in a while, so I'm trying to make sure I'm up to data eon getting the latest CWM and Cyangen ROMs installed.
So the situation is, if I have a Nook Color that is stock, and has already been rooted, can I install the CWM ROM Manager APK, use that to install the latest CWM image to EMMC, and then boot to CWM recovery and install whatvery ROM I choose, say Cyanogen 10.2? Will different versions of the Stock frimware make a difference?
This is the process I think will work, but its been a while.
Thanks
Click to expand...
Click to collapse
Follow this guide http://forum.xda-developers.com/showthread.php?t=1941858to go from stock (or rooted stock) to CM 10.1 with CWM installed on emmc, along with the ROM ... I chose the latest 10.1 RC from just a few days ago. Process went flawlessly.
Thanks remmian, but that link appears to be for installing to an SD Card, rather than EMMC. I'm going to try and see what I can figure out.
Thanks
This thread:
http://forum.xda-developers.com/showthread.php?p=12797652
Sent from my Nook HD+ running CM10.1 on emmc.
Quick question - I rooted my Nook Color to CM7 eons ago and it works fine, however I want to load Kit Kat on there now. Can I simply get the CM11 image and use the ancient version of CWM that I first put on it years back? Or will I need to upgrade my CWM to something more current to load the newer Kitkat kernels?
rbk123 said:
Quick question - I rooted my Nook Color to CM7 eons ago and it works fine, however I want to load Kit Kat on there now. Can I simply get the CM11 image and use the ancient version of CWM that I first put on it years back? Or will I need to upgrade my CWM to something more current to load the newer Kitkat kernels?
Click to expand...
Click to collapse
You will need to use CWM 6.0.4.7 for cm11 nightlies prior to 5/16/14. Use CWM 6.0.4.8 for cm 11 nightlies after 5/16/14.
hwong96 said:
You will need to use CWM 6.0.4.7 for cm11 nightlies prior to 5/16/14. Use CWM 6.0.4.8 for cm 11 nightlies after 5/16/14.
Click to expand...
Click to collapse
Great, thanks. As my CWM is so old (maybe 3.x?), is that just a matter of: install zip from sdcard -> choose zip from sdcard ?
rbk123 said:
Great, thanks. As my CWM is so old (maybe 3.x?), is that just a matter of: install zip from sdcard -> choose zip from sdcard ?
Click to expand...
Click to collapse
Before proceeding make a backup using CWM.
Download the appropriate CWM (e.g. for CM11 Snapshot M6 use CWM 6.0.4.7 & for CM11 5/17/14 nightly use 6.0.4.8).
Boot into current recovery.
Install zip
Choose zip to install
Reboot.
Should now see CWM-based Recovery v6.0.4.7 or 6.0.4.8
Ok, that's what I was hoping. Thanks.
nm
Can I use the latest CWM to flash CM10?
Harlley Sathler said:
Can I use the latest CWM to flash CM10?
Click to expand...
Click to collapse
No. It needs to be earlier than v6045. I have v5504 and v6012 on my NC tips thread linked in my signature.
Sent from my SCH-i705 using XDA Premium HD app