Hello, my DVP suddenly went bonkers and all i get is the DELL boot logo. I tried going into recovery to restore but pc wont detect. I cant do anything. i cant install anything using cab sender since cant detect and i cant unbrick due to same reason....anyone know how to fix this? Thank you in advance.
It sounds like the internal SD card crapped out. You could try my unbrick method but it sounds like it isnt being detected. Check in device manager to see if the USB device is being detected.
no detection at all. my friend told me he installed something on it using cab sender. Don't know what files were used but if need ill ask him. If only connection still worked i can restore stupid phone.
Anyone has any idea what to do? phone is just being paper weight now would like to use it again
dinhy34 said:
Hello, my DVP suddenly went bonkers and all i get is the DELL boot logo. I tried going into recovery to restore but pc wont detect. I cant do anything. i cant install anything using cab sender since cant detect and i cant unbrick due to same reason....anyone know how to fix this? Thank you in advance.
Click to expand...
Click to collapse
i had the same problem with other DVP, and i think that the processor is dead, because the snapdragon QSD8250 have this issue, i know but some month´s ago, i buyed two non working hd2, thinking that have problems of software and after research many days, i find this problem ,this proccesor dies for overheating , to solve this i buyed two hd2 with broken display and change the board, for this reason, buyed a broken dvp to do the same, ...sorry for the bad news,
Im pretty sure its not a cpu issue, i mentioned my friend force install something using cab sender and the issue happened because of that. Im trying to figure out how to recovery from this issue. thanks for help anyways
dinhy34 said:
Im pretty sure its not a cpu issue, i mentioned my friend force install something using cab sender and the issue happened because of that. Im trying to figure out how to recovery from this issue. thanks for help anyways
Click to expand...
Click to collapse
I agree with you. I have the same problem because of skipped upgrading of ROM, form 7004 to 7720. I have tried some steps on the device,
and find JTAG pins on board, now I'm seeking a riffbox to fix the problem, maybe Nosker can answer if this is feasible. I had followed his thread here:http://forum.xda-developers.com/showthread.php?t=1207805
Just for your reference...
seems very interesting. I hope you guys are able to proceed with what you guys are doing. I read the thread, so if i were to fix it i would need a riftbox? im very noobie in the stuff mentioned in the thread but if you guys are able to give a guide then i can follow it . best of luck to you guys!
did you guys ever got this resolved? i'm having the same problem.
ok... anyone tell me, what's happen, when we re-write sd card from another device?
my dell venue pro stock won't boot normally
MJCS said:
It sounds like the internal SD card crapped out. You could try my unbrick method but it sounds like it isnt being detected. Check in device manager to see if the USB device is being detected.
Click to expand...
Click to collapse
my DVP can't(won't) boot its stock on its logo dell, what can i do, but i try your step i can't download your driver. can you help me or there's another way to restore or to flash my DVP THANKSS
same issue
Any ideas anyone.
norvymariano said:
my DVP can't(won't) boot its stock on its logo dell, what can i do, but i try your step i can't download your driver. can you help me or there's another way to restore or to flash my DVP THANKSS
Click to expand...
Click to collapse
dell venue pro
Has anyone come up with a fix for this issue? my DVP will come on and the DELL logo will appear for a few seconds then the connect to pc screen
comes up and thats all it will do. when this first started happening I could take the battery out and put it back in like 50 times and it would finally start working and it would stay working until the battery went dead now I can't get it to boot at all. any info would be great thanks
Related
my T-Mobile MDA don't turns on .
mabye bootloader is deleted...
I need write bootloader at EPROM and from were I can download it?
I need Bootloader for my T-Mobile MDA...
Sorry for my english
Are you sure its the bootloaders corruption or deleted,how do you know it ?What happened or what were you doing ? when this happened.Which is your device G3 or G4 ?
well,if its real,I'm sorry,its not possible and easy to write bootloader at EPROM ,it requires special knowledge and skill and special tools to perform this.You'll have to take your phone for repairs to a Mobile phone repair shop.
Good luck !
I dont know what seems to be the problem. I tried to install Windows but it always stops at 99% and freezes over. Right now it doesn't even start at all. For some reason it doesn't react to PC neither is able to recharge.
I'm not going to install any kind of bootloader. I'm taking it to the hardwere store, unfortunately they haven't any bootloaders. So can you please tell me where i can find one?
hmmm,
so you don't know exactly whats wrong with it.Which is your phone G3 or G4 ? What's the IPL/SPL...? of the phone,post it here,it'll determine the version.Only then it'll be possible to verify whats gone wrong with it.Which Rom were you trying to flash ?
if the phone worked perfect before we did all those things. Is there any chance that phone could have been with factory defect?
your questions will be answered tommorow by a person who's been trying to install windows and all those things.
Int3lig3nt said:
if the phone worked perfect before we did all those things. Is there any chance that phone could have been with factory defect?
your questions will be answered tommorow by a person who's been trying to install windows and all those things.
Click to expand...
Click to collapse
Well,if the phone was working perfect before, then sure it did not have any factory defects in it,if it had then it shudn't have worked the very first day
thats why I asked about the version of the phone and what were you trying to install on it.If the phone gets into bootloaders (multicolor screen) then its safe,otherwise its a 'Brick'.
Hey everyone.
My boss gave me his old Jasjar to upgrade to a newer rom..
yeah..
I have followed EVERY THREAD in regards to this, including the wiki, and other sites.
here what I got:
serial/usb screen.
1. cant run mtty under usb, says it can not open.
2. newer version doesnt even have usb (running vista)
3. UNI_ExitBootloader can not open usb either
4. MaUpgradeUt_noID does squat
5. and the JASJAR_WWE_13076_164_10900_wwe_ship just runs, and closes after "compleation".
right now im dling the original rom, but dont know where to even start with it.
Please everyone, Ive seen these things get solved left and right, but just can seem to work for me. maybe im slow, maybe unlucky, but for the love of god im going to get fired!! ****, i'll be lucky to get fired when he finds out I bricked his $1k mobile...
i tried turning off usb in windows moble,
its 4:30 am and i am exhasted. i beg you, some one ease the pain...
zguess said:
Hey everyone.
My boss gave me his old Jasjar to upgrade to a newer rom..
yeah..
I have followed EVERY THREAD in regards to this, including the wiki, and other sites.
here what I got:
serial/usb screen.
1. cant run mtty under usb, says it can not open.
2. newer version doesnt even have usb (running vista)
3. UNI_ExitBootloader can not open usb either
4. MaUpgradeUt_noID does squat
5. and the JASJAR_WWE_13076_164_10900_wwe_ship just runs, and closes after "compleation".
right now im dling the original rom, but dont know where to even start with it.
Please everyone, Ive seen these things get solved left and right, but just can seem to work for me. maybe im slow, maybe unlucky, but for the love of god im going to get fired!!
i tried turning off usb in windows moble,
its 4:30 am and i am exhasted. i beg you, some one ease the pain...
Click to expand...
Click to collapse
hi, if you are runing in vista, i think that is your problem,
did you try to do that in XP?
Dont have acces to any xps, only at the office- where my boss resides..
but any way why is that the problem?
zguess said:
Dont have acces to any xps, only at the office- where my boss resides..
but any way why is that the problem?
Click to expand...
Click to collapse
oh, damn
would you like me to try it over Remote desktop,
if yes, send me a private message
have you done this before?
just tried to install original rom, and got error 101
zguess said:
have you done this before?
Click to expand...
Click to collapse
yes, i've done it before (about 2 weeks ago)
i had the same problem and I thought that my Universal was gone forever, but
now my universal is still working fine
Hello
I am new here and was wondering if someone could tell me what to do or what I did wrong.
I rooted my phone and put a custom rom on my phone by modaco. When I reboot the phone it will not go pass the dell logo. I followed all the instuctions at the unlockr.com. Followed all the videos.
Can someone tell me if I need to take something off or redo it. I am able to get into the fastboot mode and into the clockwork mod recovery v1.8.1.7 and see all the files and upload files to my sd card if I need to take them out and add through my card on my pc.
I am wondering if I did a step wrong. I also tried to go back to the stock rom and cannot get there because my phone won't boot.
I don't think it is bricked. I think I just made a mistake by skipping a step.
Thank you for your help.
khernden69 said:
Hello
I am new here and was wondering if someone could tell me what to do or what I did wrong.
I rooted my phone and put a custom rom on my phone by modaco. When I reboot the phone it will not go pass the dell logo. I followed all the instuctions at the unlockr.com. Followed all the videos.
Can someone tell me if I need to take something off or redo it. I am able to get into the fastboot mode and into the clockwork mod recovery v1.8.1.7 and see all the files and upload files to my sd card if I need to take them out and add through my card on my pc.
I am wondering if I did a step wrong. I also tried to go back to the stock rom and cannot get there because my phone won't boot.
I don't think it is bricked. I think I just made a mistake by skipping a step.
Thank you for your help.
Click to expand...
Click to collapse
The phone was working and I started to get some errors so I turned my phone back off and have not been able to get passed this dell logo when I turned it back on.
You could try reflashing it I suppose, if if that doesn't work and it's very new you might be able to convince Dell to exchange it as faulty
This is NOT a hardware fault!
Please have a look at this forum:
http://android.modaco.com/category/436/dell-streak-streak-modaco-com/
where you will find answers to ALL your questions.
Success.
Why isn't this a sticky, it's not irrelevant as people still keep doing things they shouldn't
http://forum.xda-developers.com/showthread.php?t=759951
Troute said:
You could try reflashing it I suppose, if if that doesn't work and it's very new you might be able to convince Dell to exchange it as faulty
Click to expand...
Click to collapse
Thank you. I just called Dell Yesterday and I am getting a new one sent. The phone wouldn't even do a factory reset. She said that they have been having problems with them.
Techneut said:
This is NOT a hardware fault!
Please have a look at this forum:
http://android.modaco.com/category/436/dell-streak-streak-modaco-com/
where you will find answers to ALL your questions.
Success.
Click to expand...
Click to collapse
Thank you for your help. Getting a new one from Dell.
Hi guys, Last night I accidently unplugged my phone while installing ClockWORKMOD recovery. Now when I boot my device it is stuck on the Downloading screen. I tried everything including the posts here but the Odin software doesn't see my phone and removing the battery and reinstalling does nothing. I even wiped the phone and factory reset via the clockwork... No Luck. It will not install the Crash ROM either. I get error 7.
It seems like I bricked the phone but I know there is always a way back to life. At least I hope. Any help guys would be great.
thxs
Carlo
shpack said:
Hi guys, Last night I accidently unplugged my phone while installing ClockWORKMOD recovery. Now when I boot my device it is stuck on the Downloading screen. I tried everything including the posts here but the Odin software doesn't see my phone and removing the battery and reinstalling does nothing. I even wiped the phone and factory reset via the clockwork... No Luck. It will not install the Crash ROM either. I get error 7.
It seems like I bricked the phone but I know there is always a way back to life. At least I hope. Any help guys would be great.
thxs
Carlo
Click to expand...
Click to collapse
You need to properly install the correct drivers on your PC. There should be no reason that ODIN doesn't see your phone if they are installed correctly. A quick search of the forums should get you the proper drivers to install. You can also try Kies emergency recovery, but it is hit and miss. Good luck.
+1 if you can get into download you can Odin. Use the usb ports in the back of the pc. You might have to use a different computer also. For the life of me I can't get Odin on my pc to recognize the device but I have no problem with my laptop.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Wow, didn't we just fix this problem like 2-3 threads ago, IN THIS FORUM?
TheAxman said:
Wow, didn't we just fix this problem like 2-3 threads ago, IN THIS FORUM?
Click to expand...
Click to collapse
That's the thing, these exact same types of threads just keep rolling through one after the other...people don't search and they don't read. That's the reason they are in the situation they are in to begin with and it seems they just don't learn.
Fortunately, the AT&T S4 forum has come far enough along that the sticky threads and the threads like your guide can be linked for these people to put a little time into finding a solution for themselves. Most of them don't like it (they want it done for them), but if it is all they get, they will finally have to do something the right way on their own.
Actually, a few people are thankful for being pointed in the right direction, but most are still pissed because it means they have to do what they should have done in the first place...follow XDA rules, use the search function, and read. If you don't do everything for them and hand it to them on a plate they call you names and say you are a ****, unhelpful, etc... I just laugh about it because it becomes clear why their phone is F'ed up in the first place. The thing is, sometimes you just can't help people. Just every now and then, someone comes along that needs help and is willing to do things the right way.
You can NOT have kies drivers and samsung drivers loading at the same time, I do not use kies at all, and my pc has NEVER gave me a issue yet using odin, including in my G3 days. uninstall that worthless kies and proceed. If you have to use kies, load it as needed then remove it.
And as always with the lovely microsoft windows, after you un-install anything you have to reboot, for it to work properly.
Linux is my BUD!
Hi guys,
After a long search on XDA, unfortunately I couldn't find the answer to my problem, so need to start a new threat.
This is the case: phone is on 5.0 CM12, tried to install twrp on it via the twrp market-app. When needed to reboot phone went dead and wouldn't turn on anymore. Tried to reflash firmware but my phone won't boot into download mode. When trying to do that, my pc just opens 7 screens with removable disk E:, F:, K:, L; etc.
In computer manager it also won't show the LGE port, which I would need to use to repair my phone. I never had something this bad before. Does anyone please know what to do?
Thnx in advance very much!
this seems to be really similar to my and this guys problemhttp://forum.xda-developers.com/lg-g2/help/g2-super-brick-t2962236
you shoukd try he options in this thread. i didnt have the time to do it so far
GololCohan said:
this seems to be really similar to my and this guys problemhttp://forum.xda-developers.com/lg-g2/help/g2-super-brick-t2962236
you shoukd try he options in this thread. i didnt have the time to do it so far
Click to expand...
Click to collapse
Thnx mate.. only one noob question: how do I boot into Ubuntu?
I don't really know a lot about rooting either but I can tell you that you, well, have to have ubuntu installed as your OS.
anyways me and my brother tried it and it didn't really work, because the G2 was only connected to the laptop for a few seconds.
I just wrapped it up now and im going to send it back tomorrow. I hope I'm lucky... good luck with your brick
GololCohan said:
I don't really know a lot about rooting either but I can tell you that you, well, have to have ubuntu installed as your OS.
anyways me and my brother tried it and it didn't really work, because the G2 was only connected to the laptop for a few seconds.
I just wrapped it up now and im going to send it back tomorrow. I hope I'm lucky... good luck with your brick
Click to expand...
Click to collapse
Ok, well thnx anyway man