This Rom is also available for Samsung GT-I9000 variant from HERE.
There is also a port for X-Bean from GT-I9000 from HERE.
This is it folks. If you think you've seen fast, you're in for a surprise! Please NO derivative work without permission.
LANIGHT is a pure AOSP build, meaning it is NOT CM or built from CM source, so please do NOT ask for CM features. However, it does use device/hardware files from CM10 and rest from Nexus S.. so any device specific problems that is in CM may or may not be in LANIGHT. If you don't like AOSP, move on.
I will rarely post on the thread mostly because of well known reason. It is a development thread, if you can't flash or download apps(Gmail and such) from market or simpler tasks, YOU ARE spamming the thread. Help yourselves by flashing stock firmware from Kies. Remember, I can't fix stupid or lazy. Please read the whole OP and search before you start typing. There has been NO bug that i have faced since my first release except the ringtone problem(4.2)(SOULTION) which has been solved with the latest release(5.2). If you have WiFi problems, flash anything 2.0 and above or below 5.2 (For 5.2 FLASH THIS.) because there is no telling what is the issue, i didn't face that issue so i don't know unless you provide log.
Code:
[U][B][COLOR="Orange"]FEATURES[/COLOR][/B][/U]
[LIST]
[*]Zillion commits has been added since initial release!
[*]Android 4.1.1 JellyBean
[*]DataData Partition & NODATADATA partition
[*]Speed and Cleanness of AOSP
[*]Devil Kernel Config
[*]Droid bootanimation
[*]Stock theme
[*]Nexus S HW acceleration (Thanks to mkalter)
[*]working mount of external SD to PC (Not tested)
[*]Devil3_1.0.4_cappy_CFS_BLN_VC (Datadata)
[*]Extreme Fast and rock-solid
[*]GPS Hack which would make it fast (Thanks to mikel.canovas)
[*]KC1 Modem(datadata) & JVT(nodatadata)
[/LIST]
WHY IS THIS BETTER THAN THE OTHER ROMS?
Speed++, functions and most stabe
This is pure AOSP!
This is not just another AOSP, this is a completely new project!
look at the Features list for more
Click to expand...
Click to collapse
INSTALLATION (FOR DATADATA)
Read this if you might find problems in flash process
Keep a copy of efs folder for security
Reboot into recovery
Make a nand backup before you proceed
Wipe data/ factory reset (DO THIS 3X TIMES)
mount -> Wipe System/cache/data/datadata
Wipe cache/ cache partition
Advanced -> Wipe dalvik cache
Wipe voltage cache (If the option is given)
devil -> run clean NStools options
devil -> run clean init.d directory
install rom zip from sdcard
flash zip again
reboot your phone
Click to expand...
Click to collapse
Clean Flash if coming from any DATADATA(HellyBean per say) rom
Keep a copy of efs folder for security
Reboot into recovery
Make a nand backup before you proceed
Wipe data/ factory reset (DO THIS 3X TIMES)
mount -> Wipe System/cache/data/datadata
Wipe cache/ cache partition
Advanced -> Wipe dalvik cache
Wipe voltage cache (If the option is given)
devil -> run clean NStools options
devil -> run clean init.d directory
install rom zip from sdcard
install rom zip once again (just to be on the safe side)
Wipe data/ factory reset
Advanced -> Fix permissions
reboot your phone
Click to expand...
Click to collapse
DOWNLOAD
ROM:
Download LANIGHTv1_DATADATA(stable release) from HERE
Download LANIGHTv2_DATADATA(stable release) from HERE (Thanks dave71670 for slimming)
Download LANIGHTv2_NODATADATA(stable release) from HERE (flash this if you have wifi problems with datadata)
Download LANIGHTv3.2_DATADATA(stable release) from HERE (Thanks Cbalt for figuring out partition layout problem)
Download LANIGHTv4.0_NODATADATA from HERE (changelog is similar to 4.2)
Download LANIGHTv4.2_DATADATA(stable release) from HERE (Recommended)
Download LANIGHTv5.2_NODATADATA(stable release) from HERE (Recommended)
Download LANIGHTv6.0_NODATADATA from HERE
Download LANIGHTv6.5_DATADATA(stable release) from HERE (Recommended)
Download LANIGHTv8.0_DATADATA(stable release) from HERE (Recommended)
Download LANIGHTv8.5_DATADATA_alpha from HERE (Test version)
Click to expand...
Click to collapse
THEMES/Mod
-Fix Logcat, SMS and Gallery/Camera FC from HERE
-Patch to fix ringtone problem
-Patch to fix WiFi AND Lagfix
-Patch for TV out was posted in v4.2DD
-Here's virtual on screen button key map zip: http://forum.xda-developers.com/showpost.php?p=32109290&postcount=781
-This script will delete your Gallery and Messaging app
-Read the FAQS for more. Here's a work around for installing apps if you are running 6.0NDD
-Here's a patch for video playback if you are facing that issue
-More fixes and patches also added a zip that will add your SMS and Gallery back from HERE
Theme-able messaging app
My personal favorite theme by Sephhi from HERE
HERE's an awesome theme
Here's another THEME
Another amazing theme THEME and HERE's more complete version of it. And Here's another complete version...
Theme for 6.0
Theme for v6.5 can be found on this link
Theme for v8.0 from HERE
Theme for v8.5DD from here
Click to expand...
Click to collapse
CREDITS
Cbalt (For amazing advise)
treau (For the awesome logo!!)
XYunknown (For some files from X-Bean)
Elitemovil(For the basic base)
Bigixie (Gnex share rom)
dave71670 (For his advice and help testing)
Be18
Pawtip
CM10 Team
TeamHacksung
Steeve76
HP40
iall5tar
DerTeufel1980 (Kernel)
mkalter
H3llstorm(For GPS hack)
Google for android
Samsung for the hardware
Click to expand...
Click to collapse
Hit thanks button and/or consider small amount of donation if you think i helped.
FAQs are HERE.
Here's what you can do if you are facing battery drain problems(I put together this battery help thing back in Darkyrom website. Out-Dated but most of it still applies):
- Toggle airplane mode couple of times
- Calibrate the phone and read the guide(There are some helpful tips) OR
- use dark themes and wallpapers, avoid live wallpapers. OR
- There must be some app that stays open in the background and knocking on your battery life head on. Grab BetterBatteryStats from the market, find the offending crap and uninstall it OR
- Try a different kernel OR
- Try a different modem OR
- uninstall tw4 OR
- try fast dormancy OR
- Download Juice Defender OR
- Try search for "CSC" either on google or on here and pick the right country (Does not apply for US users) OR
- Go to "Applications / Settings / Display / Animation / No animations."
- Go to "Applications / Settings / Applications / Samsung Apps" and check "Disable"
- Go to "Applications / Settings / Location and Security" and check "Use Network", "Using GPS satellites" and "Using help of sensor" (off course "Using GPS satellites")
- Overclocking also impacts your battery life!!
- Enable Force Gpu Rendering on Developer Options
- Disable auto sync for accounts
- Disable GPS and wifi when you dont use
- Disable automatic brightness and set a low level
- Disable auto rotate if you don't use
- Disable data usage setting
- Disable any Sytem animations
- Disable any Launcher animations
- Disable Widgets in Drawer option on Launcher settings-Drawer
- Disable error-usage reports on launcher settings
- Disable logging and notifications at Superuser settings
- Disable outdated binary notification at Superuser setting
- Disable any unwanted notifications
- Use dark background(avoid live wallpapers!)
- Use dark themes
- Dark icons
- Change Launcher
- Disable "auto update" at file explorer settings...
- Buy a new battery
- If all else fails, flash RE again (Refer to step# 3).
NEWS
Here's a list of so far helper's i found(will be putting them on the op):
Code:
dave71670 (slimmed versions, amazing advices, thread maintainer)
ChuckDaEngineer (our thread maintainer/themer/tester and pretty much anything i can find for him xD)
treau (For our future banner)
nygfan760 (slimmed versions/Themer/tester)
So, get to know them! (i will add as we get more people)
Fiiirrrsssttt!!!
Sent from my SGH-I897 using xda app-developers app
tkjeeper said:
Fiiirrrsssttt!!!
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Rom is up. Let me know your feedback.
Downloading will take it for a spin.
dave71670 said:
Downloading will take it for a spin.
Click to expand...
Click to collapse
Thanks a bunch!
EDIT: Gotta put you in credits for the push
Gonna give it a try!
Downloading now.. Will get back with my feedback soon.. And yes, thanks AceofSpades90 for the new choice for our good ol' Cappy..
Definitely gonna try this out. Any reasoning behing using 1.0.4?
nygfan760 said:
Definitely gonna try this out. Any reasoning behing using 1.0.4?
Click to expand...
Click to collapse
No reason, just a bit cautious. Will update kernel in future.
EDIT: Trying out newer kernels to see which one works and which one doesn't, use this kernel for now unless you wanna help test newer kernels.
swam1231 said:
Downloading now.. Will get back with my feedback soon.. And yes, thanks AceofSpades90 for the new choice for our good ol' Cappy..
Click to expand...
Click to collapse
As long as there are Nexus sources floating around, this baby will up and kicking
AceofSpades90 said:
No reason, just a bit cautious. Will update kernel in future.
EDIT: Trying out newer kernels to see which one works and which one doesn't, use this kernel for now unless you wanna help test newer kernels.
Click to expand...
Click to collapse
I'm going to pull the kernel from the newest helly bean and test it.
nygfan760 said:
I'm going to pull the kernel from the newest helly bean and test it.
Click to expand...
Click to collapse
Thanks for that. Hows the rom feel like? snappy or what?
EDIT: Not sure about the latest since he been using LVM partitioning on 08/20 onwards? I'm not sure this rom is compatible with it? If it is then its all the reason for me to support this rom till the HB exist.
EDIT EDIT: I might have to steal some of your init.d tweaks from your MIUI rom for my next version
just flashed and followed all directions and wifi couldnt be turned on. changing modems and kernels didnt fix either
Sword_of_a_1000_truths said:
just flashed and followed all directions and wifi couldnt be turned on. changing modems
Click to expand...
Click to collapse
Yes, change modem please. It's most likely a modem issue for sure.
Sword_of_a_1000_truths said:
and kernels didnt fix either
Click to expand...
Click to collapse
What do you mean? Try flashing 1.0.4 datadata cappy kernel.
EDIT: Flashed this build 4 times and still no problem with wifi or kernel. Did you wipe?
yea i wiped several times, ill try kernels and modem combos again again
oh and also ext sd card wouldnt mount in USB mode only internal so im guessing its kernel related again
Sword_of_a_1000_truths said:
yea i wiped several times, ill try kernels and modem combos again again
Click to expand...
Click to collapse
No, listen just flash JVT or whatever modem you used to use on your previous JB build. Why are you swapping kernels? I don't understand. Did you have this problem before?
EDIT: Also, let me know which datadata kernels work for you. I need to know for my future release.
Sword_of_a_1000_truths said:
oh and also ext sd card wouldnt mount in USB mode only internal so im guessing its kernel related again
Click to expand...
Click to collapse
This is an old kernel and i choosed it for cautious purposes. Please don't poke around and cause yourself problems. Flash X-Bean or CM10 or AOKP first and try this rom. May fix it.
About the Ext SD card. I don't have an External SD card to test so that's why i put in the op it's untested. Not necessarily kernel related.
i did flash a modem i used with CM10 and wifi still couldnt turn on, and USB mount of ext sdcard problem was with kernel it came with right out the box. thats why i swapped kernels, but yea ill let u know which datadata kernels i use. just gotta find those kernels. havent kept up with all the new stuff and just saw this at the top of the forum
i been flashing this phone for years so i have a lil bit of clue of what im doing. i can usually solve some of my problems
Related
VillainROM 1.0 for the Samsung Galaxy Ace
As I have mentioned previously, this isn’t the magical custom ROM you have all been waiting for, YET. It’s a base that I have created in order for me to work on over the next few days/weeks/months. As I have said a few times now, don’t expect it to be HUGELY different to stock KPE at this stage.
- Based on Samsung’s XXPE Gingerbread build
- Pre-rooted with Superuser installed
- De-odexed (improving free space on /system)
- All APKs PNG optimized and zip-aligned
- A few minor tweaks which should improve free memory – please let me know
- Full battery alert removed (no more 3am wake ups!)
- Added GenieWidget (News and Weather)
- Added Gallery3D
- Added Stock Gingerbread Launcher and REMOVED TouchWizLauncher.apk
- Menu key will now unlock the phone on the lock screen
- SOME bloatware removed
- Huge APN list
- Annoying boot sound removed
- Light weight – stripped down the build a bit without losing functionality
See.. as I said, it’s lightweight and just a base at this stage. My work will continue over the next couple of weeks, so expect to see (COMING SOON):
- Custom OC/UV kernel
- ClockWorkMod Recovery
- Add advanced power menu options (Reboot, Recovery, Download and Wipe Data (+ confirmation)
- 2.3.4 additions
Please use this thread for any requests you may have regarding this ROM in the following thread. Please don’t spam it, this is purely for requests only. I will look into each request and let you know if/when it will be implemented.
Instructions:
RECOMMENDED BEFORE YOU BEGIN:
Perform a full wipe of data/cache. Dial *#*#7780#*#* from your current ROM, and this will wipe data and perform a factory reset.
1. Download the zip file from the bottom of this thread and extract it
2. Boot your phone into download mode, and connect it to the PC
3. Open ODIN – you should see a COM port in yellow.
4. Click Ops and select Cooper
5. Click Boot and select APB_Bootxxxx.tar (not necessary if coming from KPE)
6. Click Phone and select Modem_xxxxx.tar (not necessary if coming from KPE)
7. Click PDA and select AceVR.tar.md5
IGNORE THE 2 POP-UP ERROR MESSAGES ABOUT INVALID BINARY – THIS IS NORMAL.
8. Once complete, the phone will reboot.
Now, please post any opinions, comments or feedback in this thread, and any requests here.
DOWNLOAD LINK:
http://www.villainrom.co.uk/forum/s...or-the-Samsung-Galaxy-Ace-(2.3.3-lightweight)
KNOWN BUGS:
- Wifi still has issues with some SD cards
CSC file will be uploaded to thread on VillainROM.co.uk if you need that (ie - coming from old firmware version)
1. Thank you! I guess I'm gonna give this a try tomorrow.
2. Did you build in Darktremor a2sd?
3. What are the Wifi/SD card issues?
this is awesome! Good job!
ysgace said:
1. Thank you! I guess I'm gonna give this a try tomorrow.
2. Did you build in Darktremor a2sd?
3. What are the Wifi/SD card issues?
Click to expand...
Click to collapse
My thoughts/questions too
Thanks again for your effort on the ROM nprussell...
ysgace said:
1. Thank you! I guess I'm gonna give this a try tomorrow.
2. Did you build in Darktremor a2sd?
3. What are the Wifi/SD card issues?
Click to expand...
Click to collapse
1. You're welcome
2. No I didn't but if you could link the post for me I will happily include it as an option
3. Wifi driver stops responding with certain SD cards - it doesn't seem to affect me with most of my SD cards, but I don't use this phone as a daily - I work full time in Android and have access to most android phones. I just felt sorry for you guys having no ROM and support whatsoever.
There's also quite a lot of you that own the phone, so it's crazy that not many have picked it up yet from a development perspective.
Anyway, I'll try to get you to a level that you're happy with (custom kernels, CWM, and a rom or two), then I'll move along.
Hopefully, by then, many of you guys will start experimenting with ROMs yourself. It becomes a lot easier when you've got a custom recovery image in place!
The link to Darktremor's apps2sd is here: http://forum.xda-developers.com/showthread.php?t=715116.
I definitely want to start trying to play about with custom ROMs but I'm totally new to Android. So far I've managed to unpack and repack the boot.img in order to modify init.rc but I haven't built anything as such. I'd love to get involved in trying to port CWM to the SGA but I don't know where to start. Happy to help though if I can.
Sent from my GT-S5830 using XDA App
Thank u very much!
I'll try the rom soon too.
works beautifully ...thanks! I have posted my requests at http://www.villainrom.co.uk/forum/showthread.php/4646-ROM-VillainROM-1.0-REQUESTS-THREAD
nprussell said:
VillainROM 1.0 for the Samsung Galaxy Ace
As I have mentioned previously, this isn’t the magical custom ROM you have all been waiting for, YET. It’s a base that I have created in order for me to work on over the next few days/weeks/months. As I have said a few times now, don’t expect it to be HUGELY different to stock KPE at this stage.
- Based on Samsung’s XXPE Gingerbread build
- Pre-rooted with Superuser installed
- De-odexed (improving free space on /system)
- All APKs PNG optimized and zip-aligned
- A few minor tweaks which should improve free memory – please let me know
- Full battery alert removed (no more 3am wake ups!)
- Added GenieWidget (News and Weather)
- Added Gallery3D
- Added Stock Gingerbread Launcher and REMOVED TouchWizLauncher.apk
- Menu key will now unlock the phone on the lock screen
- SOME bloatware removed
- Huge APN list
- Annoying boot sound removed
- Light weight – stripped down the build a bit without losing functionality
See.. as I said, it’s lightweight and just a base at this stage. My work will continue over the next couple of weeks, so expect to see (COMING SOON):
- Custom OC/UV kernel
- ClockWorkMod Recovery
- Add advanced power menu options (Reboot, Recovery, Download and Wipe Data (+ confirmation)
- 2.3.4 additions
Please use this thread for any requests you may have regarding this ROM in the following thread. Please don’t spam it, this is purely for requests only. I will look into each request and let you know if/when it will be implemented.
Instructions:
RECOMMENDED BEFORE YOU BEGIN:
Perform a full wipe of data/cache. Dial *#*#7780#*#* from your current ROM, and this will wipe data and perform a factory reset.
1. Download the zip file from the bottom of this thread and extract it
2. Boot your phone into download mode, and connect it to the PC
3. Open ODIN – you should see a COM port in yellow.
4. Click Ops and select Cooper
5. Click Boot and select APB_Bootxxxx.tar (not necessary if coming from KPE)
6. Click Phone and select Modem_xxxxx.tar (not necessary if coming from KPE)
7. Click PDA and select AceVR.tar.md5
IGNORE THE 2 POP-UP ERROR MESSAGES ABOUT INVALID BINARY – THIS IS NORMAL.
8. Once complete, the phone will reboot.
Now, please post any opinions, comments or feedback in this thread, and any requests here.
DOWNLOAD LINK:
http://www.villainrom.co.uk/forum/s...or-the-Samsung-Galaxy-Ace-(2.3.3-lightweight)
KNOWN BUGS:
- Wifi still has issues with some SD cards
Click to expand...
Click to collapse
waw thanks sir for this one. your the man.... muah
where is cooper.ops?
EDIT-
got it from here - http://www.mediafire.com/?3c45v43svq220ak
dude the link in villiam sites not working....and some people added copper file...i want to know whats the purpose ....and can u upload a single file including CSC and copper
Thank you
@nprussell
Just tried the new rom. Thanks a lot...
Works really good.. no issues for me...
Thanks again....
Thank u very much!
I'll try the rom soon too.
thanks for the good job!!!
'not necessary if coming from KPE' what does this mean????
Thank for your work. It would be possible incorporate TW launcher in the next rom?
yoyigo07 said:
Thank for your work. It would be possible incorporate TW launcher in the next rom?
Click to expand...
Click to collapse
It was agreed on the discussion in the Ace thread that gingerbread launcher would be opted over TW4, nathan prefered GB launcher and even it was seconded by many users.
personally i feel any would do, i just need a light weight rom
'not necessary if coming from KPE' what does this mean????
CodeName Android is now officially supported on the Vibrant so this thread's life is at an end.
Go here:http://codenameandroid.com/cna-1-5-0-add-multiple-devices-and-nightly-builds/ to get the latest nightly build.
or in XDA here for sixstringsg's build:http://forum.xda-developers.com/showthread.php?t=1531135
HERE WE GO with CodeNameAndroid 1.4.0 Nightlies for my (or your) Vibrant. This is pure CNA. It is from a I9000 (nightly) build made by Bubble-be from the 02-26-2012 source.
Bubble-be’s thread: http://forum.xda-developers.com/showthread.php?t=1512938
It is a straight build from source, nothing added, nothing changed. I have only ported it to the Vibrant. GAPPS is not included so you will need to flash GAPPS after flashing the rom. I have removed the asserts in the update script so be sure you have a T-Mobile SGH-T959 Vibrant before flashing.
Please visit and donate at the CodeName Android Development Site @ http://www.codenameandroid.com
This is a port that I personally made for myself. I liked it so much I decide to share with all here.
If you are an experienced user try it out. As I made this for me, what you see is what you get.
Do not expect support, although I will try to help if you have problems. Please visit the pages linked above to get info and change logs etc.
Additional issues fixed in the 02/26 nightly besides those in the below change log.
* RIL issue (not correctly registering signal strength and taking a long time to get a signal after reboot) has been fixed.
* External SdCard now mounts properly on the PC
1.4.0 Changelog
* common: CNASettings has been merged into settings and has been completely re-writen to work better on both phones and tablets
* common: removed google apps from compile
* common: added the file manager back
* common: wait to lock screen (romanbb)
* common: webos style recents (Zaphod-Beeblebrox)
* common: better rotation control options (Team Eos)
* common: Added CombinedBar Auto Hide (Flemmard)
* common: all lockscreen graphics have been improved and resized (androiduser)
* common: root is now option (cyanogen – in developer options)
* common: faster transition animations in the launcher (nebkat)
* common: Hiding media from folder with .nomedia file. (cyanogen)
* common: all battery and clock customizations now work on tablets
* common: enabled the Notification Power Widget Enable on tablets (TDR)
* common: improved scrolling chache for much smoother scrolling (pawitp)
* common: zRam and Kernel samepage merging (cm – performance -> memory management)
* common: option for always enabling battery percentage on the lock screen (whitehawkx)
* common: improvements made to the lockscreen to work better on both phones and tablets (codenamedroid)
* common: phone target is now replaced with browser when compiled for tablets
* common: camera unlock target is now always accross from the unlock target to emulate the stock android lockscreen layout
* common: Increase Zygote preload GC threshold to half the heapgrowthlimit for faster boot times (Vijay Dandiga)
* common: fully configurable power menu (romanbb for screenshot and codenamedroid for reboot and airplainemode – Interface -> General)
reboot and screenshot options disabled by default to be more in line with stock
* common: made clock on big clock a tab bit smaller: looks nicer and works better on phones with smaller screens
* common: Profiles – Quiet Hours – gives the ability to have certain sounds, vibrations, and notifications to mute a specific times (DvTonder)
* common: fast torch – enable flash light from lockscreen by holding down on the power button while the screen is off (Zaphod-Beeblebrox – Interface -> Lockscreen)
This port includes:
CNA 1.4.0 nightly(I9000)-02/26/2012, Thanks to Bubble-be
Icy Glitch V14b5 Kernel, Thanks to sixstringsg
KB5 modem, Thanks to scrizz
GPS files compilation, Thanks to hurtz777
Keylayout files, build.prop edits, updater-script edits
CNA 1.4.0 nightly (02/26): http://dl.dropbox.com/u/17980900/cna_1.4.0_nightly_02-26_vibrant.zip
GAPPS 02/24/2012: http://dl.dropbox.com/u/17980900/gapps-ics-20120224-signed.zip
A full wipe Flash is recomended for the first install.
My installation method:
Wipe data/factory reset
Wipe Cache
Format /system
Flash rom
Flash GAPPS
Wipe Dalvik
Fix permissions
reboot recovery
reboot system, wait 10 min for Dalvik cache to build
reboot system
Older ports
CNA 1.4.0 nightly 02/23
Rom: http://dl.dropbox.com/u/17980900/CNA_4.0.3_v1.4_2-24-2012_Vibrant.zip Kernel is Nelsons v12 b8 for ICS Passion
GAPPS 02/15/2012: http://dl.dropbox.com/u/17980900/gapps-ics-20120215-signed.zip
DaxINFINITY ported the CodeNameAndroid rom from the Nexus S to the I9000. http://forum.xda-developers.com/showthread.php?t=1485734. 1.3.2 and 1.3.3 are ports of ports. GAPPS are included.
Here's the flashable zip of CNA 1.3.2 ported to the Vibrant (includes gps fix also) http://dl.dropbox.com/u/17980900/CNA_4.0.3_1.3.2_Vibrant-signed.zip
Here's the flashable zip of CNA 1.3.3 ( GPS works but it does not survive deep sleep) http://dl.dropbox.com/u/17980900/CNA_4.0.3-1.3.3-Vibrant-signed.zip
No Wipe needed over CNA 1.3.2, full wipe is OK and probably recomended if you are using a kernel other than stock.
Do a backup, try it out.
Best ICS if used!
I've been using this for about 4 hours and I have to say this is the smoothest most customizable ics rom I have used.
And thank you for posting all the need files, would have been nice when I flash this earlier.
jeremy2420 said:
I've been using this for about 4 hours and I have to say this is the smoothest most customizable ics rom I have used.
Click to expand...
Click to collapse
Yeah, It's pretty sweet. I haven't run into any bugs yet.
The only thing I found is that the signal bars are full when you have service but nothing in between. So it shows either you have no service or full service but that's not a big deal.
jeremy2420 said:
The only thing I found is that the signal bars are full when you have service but nothing in between. So it shows either you have no service or full service but that's not a big deal.
Click to expand...
Click to collapse
I also have a no go on GPS. I need to find the right GPS files to insert.
edit: Flashed the Passion v9+gps kernel then then Passion b8 kernel on top of it rebooted and now gps locks.
edit: I put full rom up for download with gps fix in the OP.
bobshute said:
I also have a no go on GPS. I need to find the right GPS files to insert.
edit: Flashed the Passion v9+gps kernel then then Passion b8 kernel on top of it rebooted and now gps locks.
edit: I put full rom up for download with gps fix in the OP.
Click to expand...
Click to collapse
Nice work, just a heads up I'm using the latest glich(b3) and got black screen after unlocking. But then I just locked then unlocked again and it was fine.
Edit: oh and by the way I don't think I'll go back to another ics rom, it has been that good!
The bomb
This rom is the bomb.....thanks Bob
WOW.
This is a pretty damn smooth rom. Smoother than the experience i've had with Passion.
Bob, I want you to make a [PORT] thread in the dev section. This is a really good ROM that you've ported. and I thank you.
I came directly from V13 Passion, no wipe. Did follow instructions from OP.
Some notes: The Bootanimation looks really low quality and pixelated.
Are you using the same kernel as Passion? It has the same image for the kernel loader.
The rom boots up REALLY fast.
Errors:
Currently my Market is NOT working. Rebooted, and I will perform OTHER things to try and fix it, but the error is "SERVER ERROR =RETRY="
I tried Wiping DATA,CACHE etc.
I will now try to push another VENDING.APK from the actual rom into this.
Cancel that, tried it, did not work. Also I looked in this ROMS System/APP and there is no Vending.apk ...?
=====================================================
I TRIED TO FLASH FROM ABSOLUTE WIPE market still does not work.
Another problemo: External SD does not show up mounted on computer.
Another: It takes a LONGGGGGGGGGGGGGGGGGG time to get signal for me.
Haven't tested if its just the signal not updating itself or not...
If nothing works, i'll wipe data(format) and then try again. This seems like a good rom to try out. I'll let others know as well.
*so far recommended to try by me, the smoothness is amazing.
xriderx66 said:
Errors:
Currently my Market is NOT working. Rebooted, and I will perform OTHER things to try and fix it, but the error is "SERVER ERROR =RETRY="
I tried Wiping DATA,CACHE etc.
I will now try to push another VENDING.APK from the actual rom into this.
Another problemo: External SD does not show up mounted on computer.
Click to expand...
Click to collapse
Not sure about the market mine is working, but the external sd is a know problem. They are working on a fix in the next release over in the i9000 forum.
Mine also takes a while to get service, about a min if not more after boot.
xriderx66 said:
WOW.
This is a pretty damn smooth rom. Smoother than the experience i've had with Passion.
Bob, I want you to make a [PORT] thread in the dev section. This is a really good ROM that you've ported. and I thank you.
I came directly from V13 Passion, no wipe. Did follow instructions from OP.
Some notes: The Bootanimation looks really low quality and pixelated.
Are you using the same kernel as Passion? It has the same image for the kernel loader.
Errors:
Currently my Market is NOT working. Rebooted, and I will perform OTHER things to try and fix it, but the error is "SERVER ERROR =RETRY="
I tried Wiping DATA,CACHE etc.
I will now try to push another VENDING.APK from the actual rom into this.
Another problemo: External SD does not show up mounted on computer.
If nothing works, i'll wipe data(format) and then try again. This seems like a good rom to try out. I'll let others know as well.
*so far recommended to try by me, the smoothness is amazing.
Click to expand...
Click to collapse
Thanks, Things I've noted.
External SD does not show up on computer but works on phone.
It sometimes takes awhile after reboot to get phone service, but it comes. toggling wifi usually turns it on.
In the reboot menu it looks like reboot is selected but it's actually recovery. select reboot again and you're fine.
I'm using the Passion v12 b8 kernel. I tried Glitch but didn't like.
My market worked fine, but I have either upgraded from Passion v12 or did a wipe and started from scratch.
GPS works fine after a boot but IDK if will continue after deep sleep.
After a clean wipe, market is still not working, and it is not my wifi connection, i tried browser and went to other websites, and it works.
Anyone mind giving me their Vending.apk or something and tell me where to put it i thought it was system/app
Or anyone know what to do about Market problem?
jeremy2420 said:
Not sure about the market mine is working, but the external sd is a know problem. They are working on a fix in the next release over in the i9000 forum.
Mine also takes a while to get service, about a min if not more after boot.
Click to expand...
Click to collapse
I've been working on a 1.3.3 port but they changed a lot. and GPS is hosed so far, won't stop pinging, will probably drain the battery fast. If I can figure it out I'll post it.
xriderx66 said:
After a clean wipe, market is still not working, and it is not my wifi connection, i tried browser and went to other websites, and it works.
Anyone mind giving me their Vending.apk or something and tell me where to put it i thought it was system/app
Or anyone know what to do about Market problem?
Click to expand...
Click to collapse
Here's the latest gapps. Try flashing it. It has vending.apk.
http://dl.dropbox.com/u/17980900/gappsv7.zip
Here's the bootanimation I use. Blueplasma from Nexus S. tired of expolding rainbow.
http://dl.dropbox.com/u/17980900/BluPlazmaII-Nex.zip
ignore my issues about market, i rebooted for the... 6th time and then it decided to finally let me into Google Market. haha
Anyways i'll give it a shot for a day, and regarding the post above the one you posted, I don't have a data plan, so I don't ever use GPS anyways. Is there a way I can shut it off from pinging so much? remove gps files itself or something??
thanks for the great rom bro.
aww it doesn't have ICS style blue checkmarks
xriderx66 said:
ignore my issues about market, i rebooted for the... 6th time and then it decided to finally let me into Google Market. haha
Anyways i'll give it a shot for a day, and regarding the post above the one you posted, I don't have a data plan, so I don't ever use GPS anyways. Is there a way I can shut it off from pinging so much? remove gps files itself or something??
thanks for the great rom bro.
aww it doesn't have ICS style blue checkmarks
Click to expand...
Click to collapse
The Gps is fine in the 1.3.2 Rom posted. It's the 1.3.3 that I'm trying to port where it's fudged up.
bobshute said:
The Gps is fine in the 1.3.2 Rom posted. It's the 1.3.3 that I'm trying to port where it's fudged up.
Click to expand...
Click to collapse
Hey bob if its giving you that much trouble, 1.3.3.1 is going to be released tomorrow with some fixes, so maybe wait till then. And a quick Q; where do you replace the kernel files in the rom zip so i dont have to flash it afterwards?
Alright thanks man, bootanimation goes in system/media correct?
Also, MAKE A THREAD FOR THIS RIGHT [email protected]$#@%[email protected]
IDK if you're going to keep the same name from ported rom or make a new one, but if you decide on a new one, make it something interesting something thats fun to say
xriderx66 said:
Alright thanks man, bootanimation goes in system/media correct?
Also, MAKE A THREAD FOR THIS RIGHT [email protected]$#@%[email protected]
IDK if you're going to keep the same name from ported rom or make a new one, but if you decide on a new one, make it something interesting something thats fun to say
Click to expand...
Click to collapse
The boot animation is a CWM flashable. or pull bootanimation.zip out and put in system/media.
Any ideas about the bit of lag i'm getting? It's mostly in the Settings app, I for example, uncheck/check something, it just holds for like 5 seconds and then registers my touch.
xriderx66 said:
Any ideas about the bit of lag i'm getting? It's mostly in the Settings app, I for example, uncheck/check something, it just holds for like 5 seconds and then registers my touch.
Click to expand...
Click to collapse
I'm not sure. I get it sometimes too, then it goes away. Something must be running in the backround. Try closing out apps in the app switcher and see if it helps.
this rom is based on MIUIXXX v.0.36
i just add some tweak and patch for make it faster and fixing some bugs
Working:
sms
calender syncing is work now
Audio
vpn conection
Dsp Manager
Sensors
Full 2D/3D/HW acceleration
Camera/Camcorder
WiFi
BLN
Bluetooth
Browser
Live wallpapers
GPS (Use fasterfix to set your region)
Deep sleep
FM radio
Wifi and usb tether (using an app from Play store)
And all is working in cm7 or in MIUI
Music Player also gets themed when you change your theme
4-way Reboot
30 Steps Volume Mod
fixed
operator name
thanks & credit
all goes to SmOuuK & LewisGauss for making possible to enjoy miui for our ace
Installation :-
1. Wipe data/ factory reset
2. Wipe cache partition
3. Advanced/ wipe dalvik cache
4. Advanced/ wipe battery stats
5. Mount and storage/ format system
6. Install zip from sdcard/ choose zip from sdcard and select the ROM zip
7. Reboot n Enjoy
Pick it up ringtones to choose from the following:
theme-edit theme-ringtone
download ROM
http://www.mediafire.com/?h838e4azkv9of51
Attention
if u fell lag in rom,i suggest to
*
change kernel and use this boot.img,instead of the same file in rom
now flash rom again
http://www.mediafire.com/?ht8mhw25hwb38fi
*
change the theme,with default one
http://www.mediafire.com/?cbch6uvwht78l7s
no credit? no instruction how to install? no enough information? BUT I hope you have a permission
I hope you have permissions now. But it's looking like your latest share miui final. Just different theme ?
Woow thanks dude
You can take thread of MIUIXXX? Lewis has never released an update. You could give updates to MIUIXXX
no credit ??
have you asking for permission?
plis .... respect...
GT-S5830
Coming soon threads arent allowed following the xda policy
Sent from my GT-S5830 using xda premium
Give big thanks to ahmad safar dude..
Sent from my Nexus S using Tapatalk 2
are you sure?
are you sure this is "final"? is graphic bugs fixed? things like clock widget and launcher edit mode... and yes, "coming soon" is a little bit annoying
Cant see the download anywhere
!!
It will be multilanguage?
Any feedback for this rom, working -not working -issues - is the link still active ????
Sent from my GT-S5830 using xda app-developers app
Where I have to put boot.img?
Dru79 said:
Where I have to put boot.img?
Click to expand...
Click to collapse
Copy the ROM and kernel in a custom folder, then open the rom with winrar drag the rom to the kernel after it replaced the previous
Ringtone starts only after first ring.
Sorry for my english.
Tapatalk 2-vel küldve az én GT-S5830-ről
Did you repair graphic issues (in some games and apps) and slow working on some launchers etc.?
this is gorgeous!
Testing with updated kernel. Any report in this same post, later today or in the next days. First impression: wow! Second impression: (wow!)^3.
To be continued...
UPDATE 1: Ok, here some notes after some tries...
Strange visualization of some apps (e.g. Jrummy's Root Browser Lite) with wrong space and scale between graphic elements. Text in Google Play is near white, almost unreadable, also in Viber's popup windows. Some chinese symbols in calendar. Email's input fields dirtied by strange blue lines. Compass ovalized.
Deleted useless (for now) scripts:
00banner, 01mountsd, 02miuithemeprop, 04 first boot, 05 lagfixer, 07 writeback, 09scardspeedfix, 97swap2sd, net_buffer, remount_fullext4, s99drop_cache.
Also, maybe I'm wrong but it seems to me that swap file function isn't supported by kernel, apparently you cannot have a swap file.
Modified also build.prop but only to meet my needs of mantain scripts as clean as possible!
UPDATE 2: deleted /system/default.prop, the values here aren't well suited for this rom causing instability or reboots. It will be automatically replaced by the default file residing in the ram disk.
UPDATE 3: replacing kernel with that taken from latest LeWa rom (only for test purposes, some devices e.g. bluetooth will not works!) you can activate the swap file. Sorry I cannot try further this rom, I hope that the next version will be better.
This rom is enjoyable although not perfect, needs some work but the path is right! My bests!
Additionally: auto-retrieve MMS doesn't work.
Hello, any progress with bugs removal?
slimohnr said:
Hello, any progress with bugs removal?
Click to expand...
Click to collapse
Ram does not have any particular problems
PA-JB4.3 for Canadian Samsung Galaxy S2 HD LTE (SGH-I757M)
Code:
[COLOR="red"][B][SIZE="4"]*** Disclamer ***[/SIZE][/B]
THIS ROM IS FOR THE CANADIAN SGH-I757M ONLY... DO NOT FLASH IT ON ANOTHER DEVICE!
By flashing this ROM, you are voiding your phones warranty (Unless you return it
to complete stock which is possible, but beyond the scope of this thread). You
also agree that I will in no way be held responsible in the event that your
device becomes bricked (Not likely to happen). In addition, you are responsible
to take the necessary backups of your apps, data, sms, contacts, calendar events, etc.
If you agree, then please continue on ;)[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RECOVERY REQUIRED ***[/SIZE][/B]
Due to the addition of user control in PA-JB4.2/PA-JB4.3, you are required to update
your recovery to a supported recovery. As of this writing, the latest available
version is CWM6.0.3.9/Philz Touch 6.07.9 for the SGH-I757M.
If you flash the new ROM with the old incompatible recovery, you risk loosing
your sdcard under a bunch of subfolders.[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RADIO FIRMWARE REQUIRED ***[/SIZE][/B]
As of PA-JB4.2, ICS radios (I757MUGLH2) are no longer supported. You must download the new JB radios (I757MUGMC5).[/COLOR]
Introduction
It's finally here :-D ParanoidAndroid JB4.3 (Android4.3.x) for the Bell Canada Samsung Galaxy S2 HD LTE (SGH-I757M). Among the most notable new features are new adreno graphics drivers with triple buffering (this is project butter). Among the most notable features in PA is the ability to set on a per/app basis, the colour and dpi. Other sought out features are HALO (onscreen notification and quick app access), and phablet mode which makes apps load as if they were on a tablet. This makes them use the tablet layouts instead of the phone layouts.
Click to expand...
Click to collapse
Images
SEE SCREENSHOTS TAB AT THE TOP OF THIS PAGE.
Click to expand...
Click to collapse
What Works
* Phone
* Wi-Fi
* Mobile
* GPS
* Bluetooth
* SMS/MMS
* Data Usage
* Camera/Camcorder
* BLN Notification (Enabled in Advanced Device Settings)
* VM Notification
* Youtube Overlays
* init.d is fully supported
* USB Mass Storage (UMS Mode)
Click to expand...
Click to collapse
What Doesn't Work
* I haven't found anything as of yet. Let me know if you find something that is not working as it should ;-)
Click to expand...
Click to collapse
Pre-Installation instructions
1) Download to your sdcard, the new CWM6.0.3.9 flashable zip which is compatible with CM10.1/CM10.2
2) Enter your existing CWM Recovery
3) Install Zip From sdcard
4) Select the CWM_RECOVERY_6.0.3.9_I757M_20131005.zip that you downloaded to your sdcard
5) Flash the new Recovery
6) Go back to the main recovery menu and go Advanced -> Reboot Recovery (This might not actually reboot you into recovery, you may have to do that manually by turning off phone and using 3-button combo)
Click to expand...
Click to collapse
Now that you have the new recovery flashed to your device, you can continue to install this ROM.
Please be aware that the new recovery detects your sdcards (internal/external) in a different way. Your internal sdcard is recognized as /storage/sdcard0 and your external sdcard is recognized as /storage/sdcard1.
Installation instructions
1) Download the Rom and Gapps (Use only the Gapps downloded from this thread. It is customized due to our small cache partition)
2) Enter CWM
3) TAKE A NANDROID BACKUP
4) Wipe Data/Factory Reset
5) Format Cache
6) Advanced -> Format Dalvik Cache
7) Mounts and Storage -> Format /data,/cache and /system (Required for a clean flash)
8) Flash the Radios
9) Flash the ROM
10) Flash the Gapps
11) Reboot Phone
Click to expand...
Click to collapse
NOTE: If you are using Philz Touch/Advanced Recovery, you can replace steps 5 - 7 by selecting the "Clean to install a new ROM" option.
Download
ROM Downloads
Build: 20140410 (Latest)
ROM: pa_celoxhd-3.99-RC2-20140410.zip (157.7MB)
GAPPS: pa_gapps-full-4.3-20140121-signed.zip (221.6MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
Build: 20140130
ROM: pa_celoxhd-3.99-RC2-20140130.zip (153.9MB)
GAPPS: pa_gapps-full-4.3-20140121-signed.zip (221.6MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
Recovery Downloads
NEW CWM6.0.3.9 compatible with CM10.1/CM10.2
CWM_RECOVERY_6.0.3.9_I757M_20131005.zip (7.6MB)
NEW Philz Advanced Recovery 5.18.4 (CWM 6.0.4.4) compatible with CM10.1/CM10.2
PhilzAdvancedRecovery5.18.4-CWM6.0.4.4-SGH-I757M.zip (9.5MB)
NEW *** RECOMMENDED *** Philz Touch Recovery 6 (CWM 6.0.4.5) compatible with CM10.1/CM10.2/CM11.0
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
* The downloads can also be found here on XDA. Use the "Download" tab at the top of the page to access both direct download or torrent download of this ROM.
Click to expand...
Click to collapse
Tips and Tricks
Checkout the second post for some tips and tricks on setting up the ROM.
Click to expand...
Click to collapse
Changelog
Code:
[B]April 10, 2014 - Build 20140410[/B]
* Added USB Mass Storage
[B]January 6, 2014 - Build 20140105[/B]
* Initial release
* Added CM performance settings
Click to expand...
Click to collapse
FAQ
Q. The UI feels very slow, how do I speed it up?
A. This ROM does not seem to run very well while on the Interactive governor. Go to Settings -> About Phone and tap on the Build Number 7 times to activate the Developer Options and the Performance Settings. Then open Settings -> Performance and change the Governor to "OnDemand" and the I/O Scheduler to "Deadline". This will get you the best operation possible from this ROM.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Paranoid Android Team - ROM Base
Without all of the hard work and efforts of the Paranoid Android team, this ROM would not be possible, so we owe them our thanks for providing us with such excellent ROMs.
In addition, I have received a lot of help on my journey to understand and be able to develop for the android platform, so I owe the following people my thanks for helping me to make this ROM possible.
* @dsixda - Initial port of CM9/CM10 for SGH-I757M
* @Strange Peer - Continued development of CM10
* @rukusx7 - Contributor
* @bijon440 - Contributor
* @kj2112 - Contributor
* @Tronith - Contributor
* @Zippy Dufus - Contributor
* @formercontra - Contributor
Thanks guys you've all been so awesome to work with ;)
One last group of people to thank. It's YOU! Without all of you guys and girls who come to download our creations, there would be no reward for doing this. Thank you for downloading, providing feedback and being part of this small family. You are all appreciated ;)
XDA:DevDB Information
UNOFFICIAL PA-JB4.3 For Bell SGH-I757M, a ROM for the Samsung Galaxy S II
Contributors
titanic_fanatic
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: SGH-I757M
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-01-06
Last Updated 2014-04-12
Tips & Tricks
Tips and Tricks
APN
Use the Bell Flex APN. You can select it by going to:
Settings -> Wireless & Networks -> More -> Mobile Networks -> Access Point Names
This helps fix some issues with VPN and some other system services.
Governor & I/O Scheduler
The Interactive governor does not work well on this ROM, so you must change it to "OnDemand" and the I/O Scheduler to "Deadline". To do this, got to Settings -> About Phone and tap on Build Number 7 times to activate both the Developer Options and the Performance settings. Then go to Settings -> Performance and change the Governor and I/O Scheduler as mentioned above. Do not forget to check the box for "Set at boot" so that it gets set every time you boot the phone.
Logcat what is it and how do I get one?
A logcat is the system log of events that occur on your device. This log provides the developers with some useful information pertaining to crashes and other bugs you may encounter while using the ROM and/or apps running on the ROM. Getting a logcat is generally a very simple thing. Just open your terminal emulator on your phone and type the following commands without typing the $ as it denotes a command on the command line:
$ su
$ logcat -v long > /sdcard/logcat.txt
Click to expand...
Click to collapse
The first command above will ask you to grant superuser permission to the terminal emulator which you must accept. The second command will create a file at the root of your sdcard called logcat.txt and then start writing the logs to this file. Since the logcat is a continuous function, your terminal emulator will not return you to the command prompt after the second command as it will continue to write logs until you stop it by pressing the x to close the emulator.
If you are experiencing an issue with an app, then you need to do the steps above to get the logcat recording, then press your home button so that you don't close the emulator, but put it in the background. Then you do the action that causes the bug to occur and then open the emulator and terminate it to stop the log from writing. this ensures that the error is located somewhere around the end of the log and makes it easier for us to spot
What is dalvik-cache and why do I need it?
To explain dalvik cache, you must understand how an app is pieced together. An apk (android app) is like a zip file and contains a bunch of files inside. Two important files to note are the resources.arsc and the classes.dex files. They are compiled versions of the resources (images, sounds, xml files) and classes (source code files) of the app. When android boots into a ROM for the first time, and everytime you install an app, the system performs an optimization called dex optimization which means that is pulls the dex file out of the app and places it into what is called your dalvik cache. The system can then pre-load these dex files and allow the app to start quickly.
Dalvik cache is stored in two locations, at /data/dalvik-cache for user apps and at /cache/dalvik-cache for system apps. We unfortunately have a very small partition for /cache, only 100MB and this sometimes causes a side effect on first boot where it fills up to much with apps that only ever run on the first boot to setup the system and then other dex files cannot be written to the /cache partition which causes them to Force Close (FC). The trick in this situation, is to bear through the FC messages to get the system to the home screen, then reboot into recovery and Wipe Dalvik Cache from the Advanced sub-menu. This will delete all the dex files in both locations I mentioned above and will force the system to regenerate them upon reboot, and this time, those 1-time running apps don't start up and don't end up being optimized which allows the necessary dex files to be created for the apps that were FC'ing.
I have moved what I could from the system partition to the data partition to spare some extra space on /cache but this still sometimes happens, especially as the ROM's get slightly bigger every new major version.
Awesome! A PA build! This are coming along with this device TF, great work. Ill install as soon as I get bored of your KK build, still using that as a daily driver for now haha
Sent from my SGH-I757M using xda premium
Does this build have the new cache?
formercontra said:
Does this build have the new cache?
Click to expand...
Click to collapse
No, it still has the old cache. I'm working on a way to make it permanent and from first boot.
This will be implemented after I figure out the fstab file.
Sent from my SGH-I757M using XDA Premium 4 mobile app
Well my morning routine of perusing your threads is taking a little longer TF. Lol.
I tried the pa build and no hiccups. I find it somewhat sluggish compared to my preferred slim ROMs.
I was thinking since you seem to be on a roll. What are your thoughts on an AOKP build? I have always enjoyed the features it has. I was messing with porting it with no success. Stuck at boot animation.
Sent from my SGH-I757M using Xparent Cyan Tapatalk 2
manfromgta said:
Well my morning routine of perusing your threads is taking a little longer TF. Lol.
I tried the pa build and no hiccups. I find it somewhat sluggish compared to my preferred slim ROMs.
I was thinking since you seem to be on a roll. What are your thoughts on an AOKP build? I have always enjoyed the features it has. I was messing with porting it with no success. Stuck at boot animation.
Sent from my SGH-I757M using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
It's definitely more sluggish. Did you change the governor and io scheduler to "OnDemand" and "Deadline" respectively? These provide the smoothest operation of this particular Rom which is why I had to add back the performance settings from CM which requires fairly extensive porting.
How are you "porting", by building? If so, you should check out my github. All of the code is there for our device and it's proprietary blobs. You will need to modify the build to work with AOKP, but most of the work has already been done by me in maintaining an updated device tree.
You would most likely need to modify the vendor/aokp files to include our device. Best to create a github account for managing that. Abs you would Assisi have to change done things in our device tree tree, such as cm.no probably changes to aokp.mk abs cm.dependencies probably changes to aokp.dependencies. Best to find a skyrocket device tree for AOKP if you can and then you can see how they did it. Then just diff the two folders to see where the differences are and modify as necessary.
I'll see what I can find, but I want planning on an AOKP, but rather an omni when it becomes more stable. And to my knowledge right now, there is an issue with the emmc brick bug code and that has to be fixed before I bother.
Sent from my SGH-I757M using XDA Premium 4 mobile app
titanic_fanatic said:
It's definitely more sluggish. Did you change the governor and io scheduler to "OnDemand" and "Deadline" respectively? These provide the smoothest operation of this particular Rom which is why I had to add back the performance settings from CM which requires fairly extensive porting.
I forgot about changing to on demand and deadline. Much better now.
How are you "porting", by building? If so, you should check out my github. All of the code is there for our device and it's proprietary blobs. You will need to modify the build to work with AOKP, but most of the work has already been done by me in maintaining an updated device tree.
No not building. Not that far advanced yet. I was just doing the amateur cut and paste using an aokp ROM for skyrocket. Thanks for your info. Hope to learn more in days to come.
Sent from my SGH-I757M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sent from my SGH-I757M using Xparent Cyan Tapatalk 2
Hi TF, I just flashed this ROM using philz recovery and the vibration issue from your CM 4.3 build is still haunting me
I've rebooted at least 3 times since flashing and I have no vibration at all
PS thanks for all the hard work you put into this device, its made it worth keeping this phone :thumbup:
Sent from my SGH-I757M using xda app-developers app
B.Moreira said:
Hi TF, I just flashed this ROM using philz recovery and the vibration issue from your CM 4.3 build is still haunting me
I've rebooted at least 3 times since flashing and I have no vibration at all
PS thanks for all the hard work you put into this device, its made it worth keeping this phone :thumbup:
Sent from my SGH-I757M using xda app-developers app
Click to expand...
Click to collapse
I actually found a fix for this (I think) and released a patched kernel in the CM-10.2 thread. I was going to wait a week before updating the other kernels, but since you are in need, I'm building it right now. Please give me a little bit to test it after it's built. About an hour or so and I'll post a link
New Kernel Fixes Vibration Issue
So here is that new kernel I promised. This kernel implements a fix to ensure that all modules get loaded on each boot. It's still in testing phase, so if you experience no vibration at any time please let me know. I've been running the new kernel for almost 2 days now and have not lost my vibration at all, even after aggressively rebooting the phone several times. I'm pretty confident that this is the fix, but as I said, it's still in testing.
Remember to take a nandroid backup before flashing just in case something goes wrong. Then simply flash the new kernel without wiping anything and reboot the phone. You can verify that you are running the new kernel by going to Settings -> About Phone and check that you are running kernel dated Jan. 8, 2014.
DO NOT FLASH THIS ON MY OTHER ROMS. DOING SO MAY GET YOU INTO A BOOTLOOP. NEW KERNEL RELEASES FOR ALL ROMS ARE PLANNED WITHIN THE NEXT WEEK.
boot-ONLY-VIBFIX-cm10.2-20140108.zip (5.8MB)
Thanks for the kernel! I've been running the rom for about 24 hours now with no issues at all
Sent from my SGH-I757M using xda app-developers app
Any and All Video files cause the app to crash stating : "unfortuantely _______ has stopped working" .
Anyone else having this issue? Or ideas to resolve?
oa12 said:
Any and All Video files cause the app to crash stating : "unfortuantely _______ has stopped working" .
Anyone else having this issue? Or ideas to resolve?
Click to expand...
Click to collapse
Which app? The gallery or video player, or both?
Sent from my SGH-I757M using XDA Premium 4 mobile app
titanic_fanatic said:
Which app? The gallery or video player, or both?
Sent from my SGH-I757M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
YouTube . Google Movies . videos in Browser or Chrome . Gallery can playback recorded videos.
oa12 said:
YouTube . Google Movies . videos in Browser or Chrome . Gallery can playback recorded videos.
Click to expand...
Click to collapse
Cheers, I'll run some tests to see what I can find. Also, a logcat would be helpful. Check out the second post as I have instructions posted on how to take a logcat. You can send that to my email [email protected] and I'll be able to see what's happening on your phone that might be different from mine.
Sent from my SGH-I757M using XDA Premium 4 mobile app
My first bug to report is that my performance settings will not stick after I reboot, I have set on boot checked but it keeps reverting back and memory settings do the same. :banghead: I haven't however had the video player player problem.
Sent from my SGH-I757M using xda app-developers app
B.Moreira said:
My first bug to report is that my performance settings will not stick after I reboot, I have set on boot checked but it keeps reverting back and memory settings do the same. :banghead: I haven't however had the video player player problem.
Sent from my SGH-I757M using xda app-developers app
Click to expand...
Click to collapse
This is most likely due to my "port" of the these settings. I will look into this
Sent from my SGH-I757M using XDA Premium 4 mobile app
B.Moreira said:
My first bug to report is that my performance settings will not stick after I reboot, I have set on boot checked but it keeps reverting back and memory settings do the same. :banghead: I haven't however had the video player player problem.
Sent from my SGH-I757M using xda app-developers app
Click to expand...
Click to collapse
Please try this new Settings.apk. I see very clearly I forgot to import the boot receiver code which is why it doesn't work, sorry :-\
This is a flashable zip, and remember to take a nandroid just in-case something goes wrong. It will replace your current settings.apk and set the correct perms.
SETTINGSFIX-cm10.2-20140108.zip(6.5MB){/B]
Thanks for your feedback
QUOTE=titanic_fanatic;49477936]Please try this new Settings.apk. I see very clearly I forgot to import the bootver code which is why it doesn't work, sorry is a flashable zip, and remember to take a nandroid just in-case something goes wrong. It will replace your current settings.apk and set the correct
The new settings fix works for me and is appreciated!
As for my video playback problem, I kept wiping for new Rom via the touch cwm and realizedit was not formatting /system . I formatted this manually and the video playback was fixed. My guess mismatch in app data and rom id between
ROM INSTALLS.
Wrote this ntvia phone. Excuse the keypad issues im having .
Code:
**** Disclaimer: I'm not responsible if you destroy your device. Use at your own risk!!! ****
Welcome to COSP, your new future Android Operating System.
Our goal is to have an Pixel-like android ROM that isn't spying on you and uses as few system space as possible. Also, we provide the option to go completely without GApps using MicroG support.
Why us?
We are focusing on stability and performance, having an debloated ROM is essential for that. Also, we want Users to decide what kind of Store they want to use, either F-Droid or the Play Store.
Also, we take User requests serious. To suggest something, contact us on telegram.
Features:
1) All systemUI tuning elements
2) An handy Network indicator
3) Charging Information
4) Lawnchair and Quickstep as default
5) Quick Settings mods
6) Signature spoofing
7) OP gestures
8) Navbar tuner
9) Rootless Substratum (with fixes to theme system correctly)
10) Screenshot/screenrecord tile
11) Advanced power menu
12) Double tap to sleep on statusbar
13) Option to disable quick settings/power menu on secure lockscreen
OTA Updating for official devices enables Users to get the newest version with ease.
DOWNLOADS:
https://mirror.codebucket.de/cosp/santoni/COSP-190507-OFFICIAL-santoni.zip
Sources:
ROM Source: https://github.com/cosp-project/
Kernel Source code: https://github.com/HarukeyUA/android_kernel_xiaomi_santoni
Device Tree: Coming Soon
ChangeLog:-07-05-2019
COSP Changelog
From April to May patch
New:
+ May security patch merged
+ replaced Lawnchair with Launcher3 from @aosiP
+ App Ops/Privacy Guard
+ Agressive Battery from @aosiP
+ Accent picker from @PixelExperience
+ seperate ringtone for second sim
+ translations: russian, italian, simplified chinese
+ font picker
+ more steps for font size
+ search bar hiding in launcher
+ switch for fingerprint authentication vibration
+ switch for inverting navbar layout
+ button on FC dialog for sending crash info to dogbin
Fixed:
* QS padding on statusbar
* crash on security settings
* LTE+ icon
* app swithching on OP gestures
* sepolicy
Removed:
- "press power on lock screen for torch" (it wasn't working anyway)
Download:
https://mirror.codebucket.de/cosp/santoni/COSP-190507-OFFICIAL-santoni.zip
Hi, I'm testing this rom for a week, and ... the rom is basically have too lag even to move apps from day to day like twitter, facebook, google chrome and firefox also go very slow too,
regards
folderx said:
Hi, I'm testing this rom for a week, and ... the rom is basically have too lag even to move apps from day to day like twitter, facebook, google chrome and firefox also go very slow too,
regards
Click to expand...
Click to collapse
No bug i found. change kernel and check
i am also using this rom for a week or so. clean flashed. even formatted the storage before installation. so far this is one of the best roms i have ever used on santoni. and i can say that i have used almost every one of them. great battery life, great performance.
Sorry for the inconvenience, it was not the fault of the rom, it was because I had activated the option of digital well-being, I deactivated it and now it works great
Cosp Official June Update
Changelog:
+ June security patch merged
+ More modes for location tile
+ Captive portal switch (Settings -> Network & Internet)
+ "More info" on permission dialog, thx to @GrapheneOS
+ Incall vibration options (COSP Settings -> Miscellaneous)
Changed:
* DNS.watch by default everywhere
* moved PrivacyGuard (COSP Settings -> Miscellaneous)
* moved Reading Mode (COSP Settings -> Miscellaneous)
* volte icon
* some permissions changes by @GrapheneOS
Fixes:
* fixed AgressiveBattery auto enable
* fixes in PrivacyGuard
* minor SurfaceFlinger fixes (hopefully fix color correction)
* minor Settings fixes
* minor LatinIME fixes
Download:
https://mirror.codebucket.de/cosp/santoni/COSP-190604-OFFICIAL-santoni.zip
I did the latest OTA-Update and now my device stuck in a bootloop at the Mi-branding. No success getting into recovery (was Orangefox), so I flashed a new one with fastboot. I restored my last backup, which was working before, but it gave me the same result - bootloop! Anyone experiences the same or any idea where to search or how to fix this? I used Magisk by the way...
gorillus said:
I did the latest OTA-Update and now my device stuck in a bootloop at the Mi-branding. No success getting into recovery (was Orangefox), so I flashed a new one with fastboot. I restored my last backup, which was working before, but it gave me the same result - bootloop! Anyone experiences the same or any idea where to search or how to fix this? I used Magisk by the way...
Click to expand...
Click to collapse
Hi. Had this problem with clean flash too. Its not your fault Sir. I dont know if Bikram already had time to change link here. But its fixed for sure.
I downloaded and flashed this update last night :
https://sourceforge.net/projects/bi...Pie/COSP-190604-OFFICIAL-santoni.zip/download
Rom boots and work as it should!
Wifi is not working in latest update, please help
Bhanu_p_mishra said:
Wifi is not working in latest update, please help
Click to expand...
Click to collapse
How did you flash Sir? I did clean flash and Wifi works.
Samuitan said:
How did you flash Sir? I did clean flash and Wifi works.
Click to expand...
Click to collapse
I also clean flashed it, though used migrator to restore apps, perhaps this is the reason for that
---------- Post added at 02:56 PM ---------- Previous post was at 02:52 PM ----------
Bhanu_p_mishra said:
I also clean flashed it, though used migrator to restore apps, perhaps this is the reason for that
Click to expand...
Click to collapse
By the way which kernel do you used with this build
Bhanu_p_mishra said:
I also clean flashed it, though used migrator to restore apps, perhaps this is the reason for that
Click to expand...
Click to collapse
You mean Migrate? I use it also to restore Userapps. I think thats not the reason .
What do you wipe for clean flash?
I wipe everything except Internal and SD Card.
Then Flash Rom and Gapps. Reboot and do Google Stuff.
After that go back to Recovery and flash Magisk and Migrate Backup zip.
Have no Problems . Try it!
Samuitan said:
You mean Migrate? I use it also to restore Userapps. I think thats not the reason .
What do you wipe for clean flash?
I wipe everything except Internal and SD Card.
Then Flash Rom and Gapps. Reboot and do Google Stuff.
After that go back to Recovery and flash Magisk and Migrate Backup zip.
Have no Problems . Try it!
Click to expand...
Click to collapse
I actually unable to understand the steps to use migrator, could you please suggest me the actual steps that you used to use migrate for rom migration purpose.
Bhanu_p_mishra said:
I actually unable to understand the steps to use migrator, could you please suggest me the actual steps that you used to use migrate for rom migration purpose.
Click to expand...
Click to collapse
Im confused. You said you use Migrate? Then you made a backup or not? What steps exactly make you headache?
I posted once my restore steps in Migrate Thread. Scroll down.
Read a little bit there too for understanding how it works.
And what about Wifi? Works now?
Samuitan said:
Im confused. You said you use Migrate? Then you made a backup or not? What steps exactly make you headache?
I posted once my restore steps in Migrate Thread. Scroll down.
Read a little bit there too for understanding how it works.
And what about Wifi? Works now?
Click to expand...
Click to collapse
I am actually using migrator which is a magisk module(not currently supported) which is different from the migrate app that you quoted, not knowing earlier about this, thanks for your post, going to try clean flash with migrate app and then see how WiFi works
Bhanu_p_mishra said:
I am actually using migrator which is a magisk module(not currently supported) which is different from the migrate app that you quoted, not knowing earlier about this, thanks for your post, going to try clean flash with migrate app and then see how WiFi works
Click to expand...
Click to collapse
You're Welcome.
Ok.. just a misunderstanding lol. Dont know about Magisk Module. I dont use any.
Yes try Migrate. Its really good. I often flash different Roms.
Please give feedback if everything works then
I would like to try this ROM too.
Does the menu translated into Romanian?
McJohn.br said:
I would like to try this ROM too.
Does the menu translated into Romanian?
Click to expand...
Click to collapse
Seems so..
Edit: Sorry wrong Rom..Thats Derpfest lol.
Samuitan said:
Seems so..
Edit: Sorry wrong Rom..Thats Derpfest lol.
Click to expand...
Click to collapse
Attached image cannot be seen!
What was that about ?