System setting for smart cover on/off? - Nexus 7 Q&A, Help & Troubleshooting

I bought a smart cover off ebay, one reviewed here. I cant get that part to work. If there a system setting to enable it?
Thanks

I don't think so. Mine from Amazon just works.
Sent from my Nexus 7 using xda premium

The Nexus 7's lid sensor is on the bottom left about a 1.5" half up.
Check your cover's lid for a magnet in the same spot. Either the magnet isn't in the right spot, too weak, or just isn't there.
You can check the N7's sensor by holding a magnet over it.

you could get a paperclip and test the magnet on the smart cover as well :silly:

most likely there's mags on your fridge or shower curtain, easy enough to check

Landara said:
most likely there's mags on your fridge or shower curtain, easy enough to check
Click to expand...
Click to collapse
so that's how the light in my fridge knows to turn off...

rudeguy said:
so that's how the light in my fridge knows to turn off...
Click to expand...
Click to collapse
Nahh, there's a switch. Mines towards the top
Sent from my Galaxy Nexus using Tapatalk 2

Yea, it's just a crappy cover. If I pull it like 2 millimeters it works properly.
One thing I have to hand it to iDevices over android, third party accessory support. One iPhone 4S - one hundred android phones and tons of tablets.

rudeguy said:
so that's how the light in my fridge knows to turn off...
Click to expand...
Click to collapse
:laugh:

Related

How many with a "hard to open box" have found any issues?

While reading the conspiracy theories, defects, issues (you know the ones that you never knew you had an issue until someone else told you theirs) threads..
I got to wanting to know how many of the "hard to open" box owners have had any issues with their units.
I realized my original hard to open box unit had double/ retaped seal.
Might they have taken a few of the units out and done something to them prior to shipping. Perhaps a last min fix (not a firmware update, as my unit got them after I opened it) or was that just to stick the FCC sticker on?
-CC
What do you define as a "hard to open box"?
just lou said:
What do you define as a "hard to open box"?
Click to expand...
Click to collapse
This; http://forum.xda-developers.com/showthread.php?t=1775785&highlight=hard+unbox
There are more threads about having a hard time opening it, suggesting to use a blender, sledgehammer, microwave or little sister to get it open. Not coming up on searches atm tho...
Interesting. :laugh: I can't say I had a "hard to open box" then.
Mine had 4 stickers on it .. one on each side of the box. After about 10 minutes of use ... my digitizer goes crazy and will not register in spots.
Mine wasn't exactly a slide-out easy open but it wasn't all that hard. I have no issues with mine.
Mine was exceptionally difficult to open, no issues with my unit.
Ah, that could be it? Makes sense.
Mine had been double taped back up, and left on to run down, so perhaps the screws had been tightened and they'd turned it on to test, without powering off.
Good theory.
With a box cutter I had my N7 out of the box in about 30 seconds.
Do people no longer use sharp objects to open boxes any more?
The box was most likely opened to add your account.
Sent from my Nexus 7 using xda premium
Mine was opened, no screen problems though
Sent from my Nexus 7 using xda app-developers app
I find it hilarious people are basing quality of hardware on how hard it is to open a box.
For the record my box was low to medium hard to open and my nexus 7 is awesome.
Sent from my MB855 using Tapatalk 2
It's all about the technique. Most people will squeeze the sides causing a suction making it difficult to open. The people with technique slightly pull out all four sides to loosen top cover, lift under the opposing corners of top cover and shake out the bottom. No problem getting it opened and got a perfect first unit. Second unit from B&H in transit.
Mine was ridiculously hard to push out, I slid a v v thin bread knife down all the sides, not much help, much application of even pressure got a tiny bit of movement enabling me to pinch the rim of the sleeve then mm by mm 1 edge at a time I got movement then it slid off, I've thoroughly inspected the device NO sign of any of the common issues and a very happy consumer.
Just for more emphasis the sleeve was on TIGHT, my collar is blue and my arms are strong but this was so tight I was concerned that tightness might cause damage.
El Daddy said:
The box was most likely opened to add your account.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Add my account? How'd the store know I was gonna buy that unit at that store to put in my account without knowing the details?
Sent from my grouper using Tapatalk
theelite said:
I find it hilarious people are basing quality of hardware on how hard it is to open a box.
For the record my box was low to medium hard to open and my nexus 7 is awesome.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
The question is it perhaps those with the harder to open boxes was because of the retaping to reseal a unit that may have been fixed last minute after the fact?
Once I got mine out I realized the tape glue and additional unintended to the design thickness of the added tape caused it to stick to the sleeve.
My second unit slid out almost by itself. It too had double tape but it seems the gamestop employees had already slid the sleeve off before. The inner box had smege on it, the sleeve was less than pristine, as my original unit.
Sent from my grouper using Tapatalk
clockcycle said:
Add my account? How'd the store know I was gonna buy that unit at that store to put in my account without knowing the details?
Sent from my grouper using Tapatalk
Click to expand...
Click to collapse
That is a good question. But mine was very difficult to open, I was surprised by it.
When I turned it on, it had my email and name there, I only had to enter my password.
Somehow it knew that unit was for my account.
My box wasn't hard to open at all. Yes the tapes were sturdy and can't be easily "cut" with your finger nails but it didn't stand a chance against my key. I opened my box in less than 30 seconds. Not sure what all the fuss is about.
Bielinsk said:
That is a good question. But mine was very difficult to open, I was surprised by it.
When I turned it on, it had my email and name there, I only had to enter my password.
Somehow it knew that unit was for my account.
Click to expand...
Click to collapse
If you ordered from Google Play, there was an option to add your Google account before shipping.
The outer sleeve on mine was extremely tight, tight, tight! But the box itself was a breeze. A perfect unit inside. Loving it.

N4 - Sliding Off Surfaces Falling Onto Floor

Ok guys - weird happenings, i use a usb cable from my desktop pc to charge my N4 at times. I had been sitting it on top of the pc tower & it has fallen onto the laminate floor 3 times and came out without injury. So i thought it was vibration from my pc tower, so i have been sitting the phone on my pc desk surface, today i found the phone hanging half way across the edge of the desk. There is no serious vibration to mention from my pc or desk, the phone has not been ringing for the phone vibrate to cause it either. So does anyone else have any paranormal activity with their N4 strangely falling off surfaces??
only thing i notice is the glass bottom surface is very slidey
This has been a problem since day one. Put a rear screen protector on. That'll fix you up.
this is the reason I bought a bumper when I ordered mine
Yeah, that's not paranormal I'm afraid, the back is very slippery, the device can and does slide even with no vibrations at all. Just make sure to place something in the surroundings of the phone when you leave it charging that can block random slides.
cheers guys, this is surely a bad design, im so lucky no serious damage occurred. Ill buy and try the rear screen protector as im not a fan of phone covers etc, Fingers crossed this does the trick. Many thanks guys for the feedback :good::good: :laugh::laugh:
mystic.bertie said:
cheers guys, this is surely a bad design, im so lucky no serious damage occurred. Ill buy and try the rear screen protector as im not a fan of phone covers etc, Fingers crossed this does the trick. Many thanks guys for the feedback :good::good: :laugh::laugh:
Click to expand...
Click to collapse
You are charging it with your PC on top of the tower with a cable tugging on it... And you are saying it is bad design? Give me a break.
Try using your charger and maybe put it someplace where the cable will not pull it. This is not rocket science.
Sent from my Nexus 4 using xda app-developers app
Richieboy67 said:
You are charging it with your PC on top of the tower with a cable tugging on it... And you are saying it is bad design? Give me a break.
Try using your charger and maybe put it someplace where the cable will not pull it. This is not rocket science.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
stop being such a forum ****.
I never said i was charging it on top of the pc tower, i sat it there. When its charging its on a flat desk surface as is the charge cable. I have sat the phone on my desk and sat it on top of my wallet and it falls off. So with this phone i will need to be careful how i place it. Of course its a bad design, i should be able to sit my phone flat on a flat surface and not worry about it falling onto the floor. Nexus aint gonna give me a new one if it were to get broken and no warning came with the phone.
oh and you know what, common manners to fellow humans, that aint rocket science :silly:
Wrong forum for this discussion really
Sent from my Nexus 7 using Tapatalk 2
estallings15 said:
This has been a problem since day one. Put a rear screen protector on. That'll fix you up.
Click to expand...
Click to collapse
can you give me a pointer to finding one, all i can find on ebay is front screen covers and gel covers etc , thanks
mystic.bertie said:
can you give me a pointer to finding one, all i can find on ebay is front screen covers and gel covers etc , thanks
Click to expand...
Click to collapse
Search for Zagg. Also do not search for screen protector. Try searching "skin" or back protector.
grubbster said:
Search for Zagg. Also do not search for screen protector. Try searching "skin" or back protector.
Click to expand...
Click to collapse
ok thanks matey, the zagg ones are very expensive so i bought one of these from germany only £2.55. :good:
http://www.ebay.co.uk/itm/360592861179?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
simms22 said:
my n4 has the same problem, its constantly trying to cut its life early. ive considered taking it in for therapy, but i havent found a doctor that specializes in nexuscide. yesterday morning, i woke up to it dangling by a chord besides me, about an inch above my hard ceramic tile floor
Click to expand...
Click to collapse
close call mate, i can vouch that it is well made after 3 falls and coming out unscaved.
my daughter found mine yesterday half hanging off the edge of my desk :silly:
grubbster said:
You seem very angry. This is just an internet forum. Not much to get worked up over.
Click to expand...
Click to collapse
your right thats why im perfectly calm, im just fed up with idiots spoiling the forums i use. It just puts me off using that particular forum again.
mystic.bertie said:
close call mate, i can vouch that it is well made after 3 falls and coming out unscaved.
my daughter found mine yesterday half hanging off the edge of my desk :silly:
Click to expand...
Click to collapse
my n4 has probably fallen/jumped at least 50 times over the past 5 weeks, and its still in perfect condition(no cases or screen guards). luckily, the far majority of falls have been on a carpet, but some have been pretty scary
I can also say that I find mine sliding. It's quite weird actually, from the tests I've done I've noticed that it usually occurs when I have it on my leather couch or my ottoman. Yes, I know it's not a desk but the phone is sitting there rather level. It has also done it on my home desk as well, but not at my work desk (yes, both desks are level). It kind of reminds me of an air hockey table type situation. If you have it on your desk and push it, it doesn't require as much work as lets say an SGS3, Galaxy Nexus, or Blackberry to move. Basically the way it's designed causes it to not create much friction between it and the surface it is on.
Although, none of this bothers me since the phone is a fricken beaut.
crecsky said:
I can also say that I find mine sliding. It's quite weird actually, from the tests I've done I've noticed that it usually occurs when I have it on my leather couch or my ottoman. Yes, I know it's not a desk but the phone is sitting there rather level. It has also done it on my home desk as well, but not at my work desk (yes, both desks are level). It kind of reminds me of an air hockey table type situation. If you have it on your desk and push it, it doesn't require as much work as lets say an SGS3, Galaxy Nexus, or Blackberry to move. Basically the way it's designed causes it to not create much friction between it and the surface it is on.
Although, none of this bothers me since the phone is a fricken beaut.
Click to expand...
Click to collapse
man this means no where can be trusted to sit your phone. what puzzles me is it always slides off to danger, not further onto my desk .
minieod said:
everyone is MAKING FUN OF YOU
do you not see that?
wow.
if you have something on top of a flat surface...unless there is something acting upon it...there is no way for it to "slide off" ... how can you perceive that even possible?
Click to expand...
Click to collapse
im not making fun of him. and there is something acting on it, its called gravity. it does mean that the surfaces arent perfectly flat, but even the slightest non perceivable slant cause it to slide.
mystic.bertie said:
your right thats why im perfectly calm, im just fed up with idiots spoiling the forums i use. It just puts me off using that particular forum again.
Click to expand...
Click to collapse
Better get a thicker skin quicker as you're dealing with a lot of teenagers in these forums. Its like playing WoW, way too many prepubescent teens.
guys, it's not the phone. It's the surfaces you're placing it on. Most tables/desks are nice, smooth and shiny. Combine that with the glass and a NOT SO PERFECTLY FLAT SURFACE and you get falls
Trust me...it's not voodoo or non-Newtonian physics
Just get any cheap gel case and you're set. I actually got a brilliant one for 2 GBP Really nice looking and with really really grippy sides.
Thread clean. It's really not nice to make fun from someone, especially here - on a biggest tech forum in the world
@OP Private messages are meant to be PRIVATE, so please don't post them here.
Now let's back on topic, please.

Anybody else have a slightly curved back?

Does anyone else noticed the back of their Nexus 7 being ever so slightly curved? Not that this is something that would bother me, but when I place it on a table it is able to have just enough rock to it that swiping my finger with it or plugging a cable into it will pull the device in the direction of the tension.
(Moderators, I originally put this in Q&A, but since I realized it isn't so much a Q&A thread, I put it here in general. You can delete the Q&A one)
EDIT: Video comparison I just made - http://youtu.be/EhS7-KTwn4g
I believe it is designed that way so the speakers don't sit flat.
Sent from my Nexus 7 using Tapatalk 2
Osiris19 said:
I believe it is designed that way so the speakers don't sit flat.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
But it is down the vertical spine of the device, not the horizontal one. Plus the speaker grills are placed on the curve of the devices edge, so laying flat shouldn't be much of a problem anyway.
Not sure then. I just tried it with mine and I don't have that problem.
Sent from my Nexus 7 using Tapatalk 2
Osiris19 said:
Not sure then. I just tried it with mine and I don't have that problem.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I just made a video of it. I put the new Nexus 7 next to the old Nexus 7.
http://youtu.be/EhS7-KTwn4g
The back is indeed slightly curved... In the words of Will Graham, "this is by design"
Oh, I wasn't sure what you meant by that. I thought you meant if you pressed down on the top or bottom edge it would rock.
Sent from my Nexus 7 using Tapatalk 2
Best buy just refused to exchange it and wouldn't even try another device to see if it also did it, claiming it is a design choice (clearly she was on the ASUS/Google development team). Nor would they PM with the Staples coupon after the fact (but I can understand that one). She was just very rude and dismissive.
I just laid mine down on a marble counter. It sits flat. Only the edges are tapered for the speakers. Its pretty sturdy.
Sent from Nexus 7 FHD from XDA Premium HD
Yes! Somebody else notices. I was using my tablet in class today vertically and it kept turning horizontal. I noticed that the back isn't completely flat which is causing it to have movement when I lay it on a flat service.
Orite said:
Yes! Somebody else notices. I was using my tablet in class today vertically and it kept turning horizontal. I noticed that the back isn't completely flat which is causing it to have movement when I lay it on a flat service.
Click to expand...
Click to collapse
Yeah, It might not be a huge "issue" (as the comment on my video says), but it is very annoying, especially considering I like to have the charger plugged in when I'm on it at times, and if there is any tension on the cord from where it is plugged in to where I am sitting, it will pull the tablet toward it.
player911 said:
I just laid mine down on a marble counter. It sits flat. Only the edges are tapered for the speakers. Its pretty sturdy.
Sent from Nexus 7 FHD from XDA Premium HD
Click to expand...
Click to collapse
Can you push it with your finger and spin it like the videos in this thread?
mrmartin86 said:
Can you push it with your finger and spin it like the videos in this thread?
Click to expand...
Click to collapse
Nope. Mines pretty flat. Even on my desk, nightstand, table. No spins.
Sent from Nexus 7 FHD from XDA Premium HD
why you need it to spin...
Rahav Griffith said:
why you need it to spin...
Click to expand...
Click to collapse
I don't want it to spin.
mrmartin86 said:
I don't want it to spin.
Click to expand...
Click to collapse
Oh... I thought you might want to find some fun in cases,
Man! If I hadn't seen these videos I would have never noticed!
Contemplating exchanging it, but my screen is perfect and zero hardware glitches others have experienced.
Hmm...
Sent from my SGH-I747 using xda app-developers app
AacidusX said:
Man! If I hadn't seen these videos I would have never noticed!
Contemplating exchanging it, but my screen is perfect and zero hardware glitches others have experienced.
Hmm...
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I didn't really notice either until I had it plugged in and kept pulling away from me. Then I noticed it when I would swipe the screen. It really is annoying but I don't know how widespread the problem is and it is hard to gauge from the limited responses in this thread so far.
this really shows how far people are willing to go to find something to complain about..
slightly curved back that allows your device to spin freely when on a perfectly flat surface... really?
people in this world will never be happy ever.
nextelbuddy said:
this really shows how far people are willing to go to find something to complain about..
slightly curved back that allows your device to spin freely when on a perfectly flat surface... really?
people in this world will never be happy ever.
Click to expand...
Click to collapse
Lol... This.
I tried to replicate, but I did not experience anything like that. I'm going with it's by design. It's in my hand 99% of the time anyway so I don't care.

Charging port cover

What's the over/under on this thing coming off??? Seems awfully flimsy to me.
skinnytoo2 said:
What's the over/under on this thing coming off??? Seems awfully flimsy to me.
Click to expand...
Click to collapse
here's to hoping a 3rd party makes a replacement? or something better. almost wanting to get the wireless setup just to avoid this being an issue.
Lol...I went back yesterday and asked about wireless charging!!!
Sent from my SM-G900V using Tapatalk
I had an old Samsung flip phone years ago with a similar cover. It stayed in place and never broke.
Yeah and it depends on the user how long the phone will take weather it dont have the cover on it.
I had that Sammy also. It was the flip one with the keyboard. Cool phone!
Sent from my SM-G900V using Tapatalk
skinnytoo2 said:
I had that Sammy also. It was the flip one with the keyboard. Cool phone!
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
I have also have had sammy. But it was not flip with my keyboard. I will ask you how it works ?.
skinnytoo2 said:
I had that Sammy also. It was the flip one with the keyboard. Cool phone!
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
How much for it?
skinnytoo2 said:
Lol...I went back yesterday and asked about wireless charging!!!
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Gs4 qi recievers work on gs5, im using it now.
darren.wlsn1 said:
Gs4 qi recievers work on gs5, im using it now.
Click to expand...
Click to collapse
Do you have a link? Do we need a special battery cover? Thanks!
skinnytoo2 said:
Do you have a link? Do we need a special battery cover? Thanks!
Click to expand...
Click to collapse
I work for Ravpower and use there charger and the reciever from gs4 so no bs case involved or battery cover.
darren.wlsn1 said:
I work for Ravpower and use there charger and the reciever from gs4 so no bs case involved or battery cover.
Click to expand...
Click to collapse
funny running into you on these forums lol
I cant get the freaking cover off with my nail. especially with my case on. its driving me nuts.
hibby50 said:
funny running into you on these forums lol
I cant get the freaking cover off with my nail. especially with my case on. its driving me nuts.
Click to expand...
Click to collapse
Wholly crap hib i didnt see it was you, ya im on a guys gs5 selling him a wireless charger and noticed gs4 reciever works fine. Nice to see ya!!
The cover is really, really annoying. Especially for me, who uses bluetooth through my car speakers for my main music stuff. So each time I get in the car I plug the phone into the 12 volt. And each time, I have to pry open that cover. The worst part is, it doesn't even stay open! I also just got my Incipio dual layer protection case in the mail and now its even harder to get the charging cover off. It's really aggravating. I don't even think it closes correctly either. It always looks like its not snapped down all the way. Just, bleh. Most annoying quirk on the 4 Samsung phones I've owned.
just get the spare battery charge kit so you never have to mess with it. Its also a better means of going from zero to 100 than wireless charger
xgerryx said:
The cover is really, really annoying. Especially for me, who uses bluetooth through my car speakers for my main music stuff. So each time I get in the car I plug the phone into the 12 volt. And each time, I have to pry open that cover. The worst part is, it doesn't even stay open! I also just got my Incipio dual layer protection case in the mail and now its even harder to get the charging cover off. It's really aggravating. I don't even think it closes correctly either. It always looks like its not snapped down all the way. Just, bleh. Most annoying quirk on the 4 Samsung phones I've owned.
Click to expand...
Click to collapse
Yeah I'm not really sure what to do here. I have a bunch of 3D models for phone docks / car docks / etc for the gs3 and gs4, the battery cover is a total nuisance on the gs5, especially because it doesn't really stay open after you open it (I'm trying to imagine how to go about designing a dock for this thing).
I do 3D modeling and have a 3D printer, if anyone has an idea for an improvement... holler. I doubt we'll see any kind of other 3rd party replacement otherwise as it's attached to the phone and clearly involved with waterproofing. not sure if it's worth the trade-off!
anywho guess I'll be giving wireless charging a try again...
If you take off the battery cover there is a screw where it holds the USB cover just take it off your not prone to accidents
Sent from my GT-I9505G using xda app-developers app
I bought a bodyglove just made to charge port cover more of a pain with big hands lol I thought about just removing it just dont want to break it
Galaxy S5
I hate things that dangle in general.
LeKtRiCzzz said:
If you take off the battery cover there is a screw where it holds the USB cover just take it off your not prone to accidents
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
Yeah definitely good that it's easy to do that - personally I'm not really upset or frustrated; it's awesome to add waterproofing - I'm just trying to puzzle out the best way to keep the feature while also making the phone easy to slide into a dock (preferably with one hand), you know?

Tips-Knock immediately unlock

If you didn't know, yours G3 have possibility to directly unlock device from black screen, if you have a knock code activated.
Just tap a knock code on black screen and voila.
ssax said:
If you didn't know, yours G3 have possibility to directly unlock device from black screen, if you have a knock code activated.
Just tap a knock code on black screen and voila.
Click to expand...
Click to collapse
really? I had no idea
No way!
water is wet
If you press the button on the back it wakes the phone and if you press the buttons either side the volume will increase or decrease (I will leave the excitement of which button you press for the desired effect a mystery for you to find out for yourself!)
Aww he was just being helpful...lol probably first knock device. I was pretty excited with mine too, kept "knocking" it all day lol
ssax said:
If you didn't know, yours G3 have possibility to directly unlock device from black screen, if you have a knock code activated.
Just tap a knock code on black screen and voila.
Click to expand...
Click to collapse
I'm not sure if you realized it but I could actually make a phone call with my G3
shook187 said:
I'm not sure if you realized it but I could actually make a phone call with my G3
Click to expand...
Click to collapse
I can check the weather with my G3
I honestly turned off this function on the G2 and G3 out of habit... is it better on the G3?
On the G2 my pants or thigh keep unlocking the phone... I guess don't wear skinny jeans with this phone?
Maybe i'll turn it back on and try again to see if they improved anything...
armadafan271 said:
I honestly turned off this function on the G2 and G3 out of habit... is it better on the G3?
On the G2 my pants or thigh keep unlocking the phone... I guess don't wear skinny jeans with this phone?
Click to expand...
Click to collapse
I put it in my back pocket and have Cerberus emailing me, informing me my bum cheek was trying to crack the knock code.
But back on topic... 5 years to post one topic about a well know feature is quite poor, this dude has racked up 40 tips:
a little thing i noticed about the knock feature is that the grid size doesn't matter! I've been messing around with it all day and love the fact that I can make the pattern very tiny and to the right (since im right handed) and it unlocks flawlessly!
armadafan271 said:
I honestly turned off this function on the G2 and G3 out of habit... is it better on the G3?
On the G2 my pants or thigh keep unlocking the phone... I guess don't wear skinny jeans with this phone?
Maybe i'll turn it back on and try again to see if they improved anything...
Click to expand...
Click to collapse
It only works if there's light. I've never had trouble when in a dark room, but if I'm holding my phone landscape and double tap to wake, it doesn't turn on if my hand is over the light sensor. Took me a while to realize that was the problem - I thought it wasn't working right.
wow.... just... wow...
Anyone else try to wipe their screens with a micro fiber cloth and the phone turns on? It does It every time.
Sent from my LG-D851 using XDA Premium 4 mobile app
ssax said:
If you didn't know, yours G3 have possibility to directly unlock device from black screen, if you have a knock code activated.
Just tap a knock code on black screen and voila.
Click to expand...
Click to collapse
Nice 1st post!
Skizzy034 said:
Anyone else try to wipe their screens with a micro fiber cloth and the phone turns on? It does It every time.
Sent from my LG-D851 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No, try not to double tap
Skizzy034 said:
Anyone else try to wipe their screens with a micro fiber cloth and the phone turns on? It does It every time.
Sent from my LG-D851 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, with anything really - a paper towel, a shirt, a microfiber cloth. If my finger heat happens to touch the screen twice, this will happen. If I hold the cloth down hard, it won't happen.
With the screen off, if you hold down the Volume Down button for a few seconds the phone will open up in camera mode.
shook187 said:
I'm not sure if you realized it but I could actually make a phone call with my G3
Click to expand...
Click to collapse
Well you think that's posh i can text on mine as well
Japultra said:
Yes, with anything really - a paper towel, a shirt, a microfiber cloth. If my finger heat happens to touch the screen twice, this will happen. If I hold the cloth down hard, it won't happen.
Click to expand...
Click to collapse
I could swear I'm not double tapping. I even try not to lol. It must be really sensitive.
Sent from my LG-D851 using XDA Premium 4 mobile app

Categories

Resources