I have an Omnia 7 that was T-Mobile (germany) branded, I debranded it via flashing other roms, and i flashed many time until some days ago after a flash it stopped to boot; now when I power on it stucks at logo.
So I looked over the net for a solution and I tried with the Device Update Support Tool and with the WP7 Downloader but both of them hadn't worked.
The strange thing is that I can't even hardreset because when I press Camera+Power+vol down I see for (less than) a second the screen where is asked to press the Win button and than it reboot.
Can somone please help me to recover that phone?
Thanks in advance
Related
Hi ,
Since Friday I have problems with my phone.
Friday morning I couldnt turn off my alram clock, screen wasnt responding. I pull battery and phone was rebooting all the time (Hero logo -> htc logo -> hero logo etc.. ).
I have turn it on by pressing power button and menu key to launch safe mode. I have launched it then I have uninstalled freshly installed application rebooted the device and it start working properly again.
Today the same thing happend. But this time I cant turn on safe mode.
The proces of rebooting take few minutes not normal amount of time(very very long) .
I have tried solution from this post
forum. xda-developers .com / showthread.php?t=556038
that didnt helped ... just make the rebooting sequence longer
I dont know what to do next.... please help
Phone info
HBOOT- 1.76.0004(hero10000)
RADIO- 6.35.04.25
Do you have a custom ROM or the stock one ?
I have stock rom .
But I have used the recovery img to upload(executed) the rom that was in the soultion in this post
forum. xda-developers .com / showthread.php?t=556038
I dont know what it did it just upacked and loaded the custom rom I think....
I have put originally RUU and still my phone doesn't turn on.
It still doing boot loop, this takes about 15 minutes.
I think I will call HTC support and return the phone for repair
Have you tried to boot WITHOUT SD in phone?
Hi Guys,
I was in the middle of flashing my OMNIA 7 then suddenly my computer shutdown due to a blackout at our home. Now my phone is stuck on the OMNIA 7 logo during boot and keep going that way.
I could still manage to go to download mode and reflash but when I try to flash it there is an error that would indicate "WRITE MIBIB FAILED!"
Is my phone bricked? I need your help.
By the way, if I get still manage to go to the DOWNLOAD MODE would that mean that my phone is not bricked?
Thanks!
Have you tryed formating before you try? Just use the other volym button.
Tryed yet?
Yeah I tried it, but still not working. . I still manage to get to "download mode" though.
As I have read through the different posts in the forum I see people experiencing the same problem such as the phone which keep on restarting and stuck on the "OMNIA 7" startup logo. . I tried the fixes that other's recommended but still doesn't work.
I tried taking the battery out for a day then putting it back in, the phone managed to boot up and I was actually able to use it but if I try to restart it again or sync it to the computer, It suddenly resets then goes on the boot loop once again. .
Well then I guess there is only one way. Return it to the store. :'(
to flash, ALWAYS restart your computer before and use a laptop with charged battery to avoid this problem.
For your problem you can tried to flash only bootloader part, radio part, or only PDA part for testing.
hay man
I had the same problem and here is the solution
follow the this link http://support.microsoft.com/kb/2530409/en-us
it works 100%
I hope it works with you as well
Nice one Abd654. Hope that helps you bor. GL
I have a problem getting in to "Connect to PC" I followed the instructions on holding the power and camera buttons, etc. but it won't go to "connect to pc" screen. . it's just keeps on flashing the "Samsung Omnia 7 logo" on the screen everytime I turn it on.
I tried doing hard reset but I cant because once the hard reset screen shows up, the phone just restarts again then the start up loop happens again. .
try this one this is from microsoft answer
http://support.microsoft.com/kb/2547687/en-us
Hi,
New phone and new to Windows phone 7. Classic story - the phone has stuck in boot screen, it says only "Samsung Omnia 7" and that's all. I have tried all tips I could find from internet - took the battery out and let it sit, tried to hard reset it -nothing. Actually hard reset button combination seemed not to work - when I turn it on, holding camera and volume down buttons, nothing happens, it shows boot screen and that's all. It do switch to the download mode when I turn it on holding camera and volume up buttons. I tried to reflash it (got the rom files that it came originally), and after restart the situation is the same - boot screen stuck and nothing happens.
I used WP7_downloader version 7.41, Samsung USB drivers v5.02. The weird thing was that older versions of WP7_Downloader did not work - told that flash lock was on. 7.41 seemed to work, it erased and downloaded all areas fine. I don't know if this is normal, but the flashing process itself took about 120 seconds only. I tried alternative ROM (classic I8700XXJK1), the flashing time was slightly different, but nothing changed, after flashing the device restarts and stuck to the boot screen. As I have read the flashing process should took about 10 minutes or so? I waited for about 20 minutes and nothing changed.
Can I switch the device to some debug mode or do something else that could lead me to the reason the device is not booting?
Omnia 7 stuck at boot screen after
I upgraded to Mango last week and i now too am stuck at the "Samsung Omnia 7" boot screen.
The phone seemed to do two updates, the first suceeded no problem. I started the update before going to bed. In the morning it had completed the first and was awaiting my pin code to start the device. All good.
It then prompted about the Mango update. I clicked it and left it for an hour or so. Came back and zune stated it was on the step, "restarting the phone".
The phone was showing "Samsung Omnia 7", i left it for another hour and then came back, no progress.
Nothing i've found on the net up until today has worked for me.
I can enter the format and download modes still.
This is what i've found and tried so far.
1:
answers.microsoft.com/en-us/winphone/forum/wp7-wpdevices/samsung-omnia-7-bricked-stuck-in-boot-loop/76831b31-2c5b-4d3b-8f65-06111e1f3798
(Did a device wipe to factory defaults, and its still stuck at boot screen
2:
support.microsoft.com/kb/2547687
(yes this is an older issue but it looked like it was working until it said something about "flash lock").
Next step is a complete ROM reinstall. But i'd really like to find out precisely which ROM i should try and if Mango is the actual culprit. I'd like to reinstall Mango if possible.
My Omnia 7 was bought secondhand.
I am with Telstra NextG carrier.
After mango update mine is behaving strange too. It shuts down itself randomly and it is stucking at omnia 7 screen. After a few try I am able to open it. But I noticed something, it's shutting down much more while it's connecting to web or PC. Can this be related? Because I couldn't find another reason about that.
After a year of playing with Galaxy S3 I got bored with constant flashing and well, I never got used to onscreen keyboard.
I wanted a phone that will just work and decided to go for a Droid Pro+. Device was form Germany as there is no official distribution in Poland. It worked like a charm for two weeks till just now.
While playing with it (changing ringtones and stuff) I got several messages about services failing - com.service.usb, com.service.google, etc.) As it happened before (but only com.service.usb) I restarted it - in a normal way - power button and then Reboot. It rebooted and after that got stuck on M logo.
The firmware was as stock as it could be. No modifications were made. What's strange, the device can't be hard resetted. I can hold the power button for several minutes and it won't turn off.
Recovery mode works, but wiping does not help. Fastboot also works, but RSD Lite shows N/A in every column of Device info. I flashed GB 2.3.6 (5.5.1Q-110_ELW-TA-36-65-release-keys-signed.Retail-en-GB.tar) found on XDA. The rom itself should be OK, as no functionality was lost (recovery and fastboot), but the device still hangs on the boot logo. Device info is still N/A.
Could it be a hardware malfunction or is there something else I could try? Warranty is probably not an option since as i mentioned there is no official distribution in Poland. Any help would be appreciated since I'm out of ideas by now... Also, does anyone know if the battery is charged when in Recovery or fastboot mode? Connecting to a charger ends up on the M logo. And because very few people in Poland have Moto devices I have no other way to recharge the battery.
Hello guys i have a strange problem. i am using my s7edge for over a year (finally was in batman rom).
After updating to marshmallow i encountered this problem where sometimes rarely my phone reboots (reboot- - show samy logo - then reboot). sometimes after few reboots it will comeback and some other time. i need to wait till it discharges fully and charge it it comes back. (but its so random though. totally happened 3 - 4 times last year)
from last week it happened quite often once a day and from yesterday it keeps rebooting in logo no matter what i do. when this happens only download mode is accessible and twrp recovery is not accessable at all. so i waited till it discharges fully but that does not help.since download mode is accessible i used Odin and flashed stock firmware, still the same result(tried several times). its just keeps rebooting in logo even after flashing with stock firmware via Odin and i have no more options to go for. is my device hard bricked? any more options i can try??? my final hope is someone here will help me.:crying::crying:
Thank you
Oh! I just posted a similar question. After several tries, I sorted out a way to make it boot:
1) With the latest samsung drivers on my notebook, I've downloaded the latest Odin (Odin3_v3.12.3) with this stock rom from sammobile (G935FXXU1DQJ4_G935FUUB1DQJ4_ARO). According to this page this rom works in Argentina and the ARO means it is used on unlocked devices. Then it has no bloatware or any company logo.
2)Charged it for a few minutes until it reached 2~3%. Vol Down + Home + Power (in that order) and entered 'Download mode'. Then plugged it into the pc.
3) Opened AP, BL, CSC and CP files, then flashed it. Once it restarts, try to get it into recovery mode with volup+home+power and charge it. I used a power bank. Then wipe cache and factory reset. Then reboot to system and let it loop until it gets into the OS.
The one I've got in quarantine is working smooth.