Database Users

Can you view your computers files on your phone using AS

Activesync? How would you do it? Through file explorer or something?

I'm doing it by standard means of Windows.

Yeah, just enter your share's name on your device. The built in file explorer will do it, but I prefer Resco.
Browsing my pc via wifi:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

GldRush98 said:
Yeah, just enter your share's name on your device. The built in file explorer will do it, but I prefer Resco.
Browsing my pc via wifi:
Click to expand...
Click to collapse
Can you not Active Sync via wifi then??
I have wifi but never tried it

I don't think so.
I don't know for sure as I don't use Activestink. (It will not run on my computer)

When I was using AS and the built in file explorer I didnt see an option to look in My Network? Do I need to configure anything? The furthest "Up" I could get to was My Device

I dont understand how to get to My Network? Anyone?

How do you connect to your networked PCs?
Hey how did you connect to your networked PC? I have Total Commander and have tried setting up the network neighborhood through that to no avail Can you access the network neighborhood via the built in file viewer?! If so how?
Thanks, Jess
BTW, Microsoft disabled ActiveSync via wifi in version 4 due to complaints of security, etc. Try 3.8 I believe that was the last version that supported sync over wifi. (Although I have not tried it)

Im not sure how to setup a network with my phone? Anyone know how to do this? Please?! Thanks!

Sorry to go on but... Anyone?
I think I need to set up a network on my computer so the phone can connect to it? Yes? No?

This works for me:
My Computer
Computer name: pchome
Create a folder on you PC for example "PocketPC" and share this folder!
PocketPC
Using TotalCommander in this example.
- Open TotalCommander
- Double click "\\" It should be above "Application Data".
- Double click "LAN"
- Double click "< new server >
- Enter "pchome" -> "OK"
- Press "OK" again
Now it should show pchome on your screen.
When you double click it it should show you your shared folders

Hmmm, that looks good I will have to try this when I get home.
To share a folder you just right click it and tick the share box or something dont you?

Correct

I cant get it to work ?
I followed all those steps... Hmmmmmmmmm, just coming up no files in the folder

I followed the same steps, even have other folders that are shared... still not working... hmm
Thanks, Jess

terminal Server Port number

Hi,
Is there any way to use the terminal server client to use different port numbers. I have terminal servers that use non standard as well as default ports, we change to get though firewalls ect. I know you can change the default listener port, is there anyway to enter the port number from the TS interface, in the windows world I would just enter servername:2323 and it would use port 2323.. Any ideas?

With the WM6 version of Remote Desktop you can enter the URL/IP Address followed by a colon and then the port number, but not in WM5.
You could try and install the WM6 version that's attached, although I haven't tried it on WM5. (DO SO AT YOUR OWN RISK, ETC)
What you can do with the WM5 version of RDP is
1. Copy and paste the default RDP Shortcut on the PPC and rename it with any name describing the server you want to connect to.
2. Run the new RDP shortcut and then use the Running Programs tab in the Start > Settings > System tab > Memory app to actually stop RDP. (This creates the necessary registry entries.)
3. Edit the following registry key on the PPC.
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\<NEW SHORTCUT NAME>]
Add a DWORD value named "Server Port" and enter the new port number
you want to use.
For what it's worth, the WM6 version allows automatic login and is far more responsive.

Terminal Server
Thanks!! The WM6 works great, one note it doesn't replace the old version. Just had to create a shortcut to the new version and it works with no problems.

hey, i´ve got some questions,
The Lazy Slug said:
1. Copy and paste the default RDP Shortcut on the PPC and rename it with any name describing the server you want to connect to.
Click to expand...
Click to collapse
i copied the original wptsc.exe and renamed it to exampletsc.exe and started it. i stoped it as you describe and checked the registry for the keys but i can´t find a new folder with the name of the new rdp file... i can only find and edit the default folder.
The Lazy Slug said:
For what it's worth, the WM6 version allows automatic login and is far more responsive.
Click to expand...
Click to collapse
hey, how can i turn on the auto login function? and if, where do i have to put the data (server, username, passwort)? in the rigistry?
thank you!

Thanks for Remote desktop software. I am now able to connect to my Desktop PC with my HTC Touch (WM6). But I can connect only through data cable. Can i connect through wifi. I am already browsing internet in my Pocket PC through wifi through my above Desktop PC's Internet connection. Pl suggest. Thanks

still cant connect
guys
first of all thanks for the new cab file
i am using new wm6 with the software given...
but stillcant connect
its says invalid IP or computer name.. or a network error ocured.
while i am ableto access the computer using lan connection.

can not install
hi,
I downloaded the files, when trying to install, in my WM 6.0 its saying u donot have enough permission. pls help
thanks
Partha

partha06 said:
hi,
when trying to install, in my WM 6.0 its saying u donot have enough permission.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mike2089 said:
Thanks!! The WM6 works great, one note it doesn't replace the old version. Just had to create a shortcut to the new version and it works with no problems.
Click to expand...
Click to collapse
does not work on wm 6.5, crashed abut ui

Windows SideShow For Windows Mobile

http://rapidshare.com/files/119808683/WindowsSideShowForWindowsMobile.CAB.rar
Installation instructions
http://forums.microsoft.com/msdn/ShowPost.aspx?PostID=3432560&SiteID=1

HTC_GLOW said:
http://rapidshare.com/files/119808683/WindowsSideShowForWindowsMobile.CAB.rar
Installation instructions
http://forums.microsoft.com/msdn/ShowPost.aspx?PostID=3432560&SiteID=1
Click to expand...
Click to collapse
Do you have any screenshots of the app working ?

Luie nederlander
Google hit 1: (this is what you get on your PC)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google hit 2: (what you see on your mobile)
Btw, the second screenshot is almost what it is, but couldn't find a better screenshot.
Allready tried it out, you can "control" your system using these plugins... Tweakers.net article (dutch) English for more information.
Download other plugins over here or using this URL for the Windows Sideshow, at the moment you can control your Powerpoint presentation (next/previous slide + preview) and control your Windows Media player (next/prev play/pause and see what you're playing + album art).
Also you can check your mail (which didn't work) and see your appointments (also didn't work). Looks promising.

Lolz i couldn't find a nice screenshot from the app for the Pocket PC so thats why i asked for the screenshot. It's looking verry nice i will try to use it. Thanks

Wicked, I've been waiting for this

some examples..
Sorry, my Vista is Turkish
..

Installation Guide..
You have to use Windows Vista..!
1- Extract files (in X86-PC Drivers.cab) to a folder.. You will need to them for "The bluetooth peripheral device" drivers on PC..
2- Copy WindowsSideShowForWindowsMobile.cab to your PDA..
3- Pair your PC and PDA via Bluetooth
4- Open "Control Panel\Windows SideShow" and check (click) applications which ones do you want to use on PDA

does this work with the media centre app??

available gadgets (english)..
http://vista.gallery.microsoft.com/vista/SideShow.aspx?&mkt=en-en

SideShow on Touch Diamond
I hope you guys can help me here.
I tried installing sideshow on my touch diamond. The .net compact framework is already running, I installed the file above, and I paired the xda with my pc.
Although the xda is listed in my bluetooth devices it won't apear in the sideshow settings.
Does anyone have a clue or experienced similar problems?
thx dr_krohn

hi
try deleting the paring and recreating it as you have to have the sideshow service in the list on your phone under bluetooth or under the same on your computer also there is a newer one out there than the one posted on the thread.

dr_krohn said:
I hope you guys can help me here.
I tried installing sideshow on my touch diamond. The .net compact framework is already running, I installed the file above, and I paired the xda with my pc.
Although the xda is listed in my bluetooth devices it won't apear in the sideshow settings.
Does anyone have a clue or experienced similar problems?
thx dr_krohn
Click to expand...
Click to collapse
I have the same problem when pairing my phone with Windows 7. According to Microsoft this is a known problem which they are investigating although there still haven't been any updates on this.

ycimpir said:
You have to use Windows Vista..!
1- Extract files (in X86-PC Drivers.cab) to a folder.. You will need to them for "The bluetooth peripheral device" drivers on PC..
2- Copy WindowsSideShowForWindowsMobile.cab to your PDA..
3- Pair your PC and PDA via Bluetooth
4- Open "Control Panel\Windows SideShow" and check (click) applications which ones do you want to use on PDA
Click to expand...
Click to collapse
How about Windows 7?

ramin1039 said:
How about Windows 7?
Click to expand...
Click to collapse
As I said in the post above yours, sideshow does NOT work with Windows 7 and there is no way around it.

Thank you! Working perfectly in my Polaris and in my Vista

Remote Desktop Connection from PDA (hTC Touch Diamond) to linux (ubuntu)

Hi all! This is a thread for the linux lovers aut there...
I have a hTC Touch Diamond with WinMo 6.1 and I want to remotely connect it to my ubuntu desktop.
DETAILS:
-my ubuntu connects to the internet through a (MSI) router that has a PPPoE connection
-I set up the Remote Desktop in ubuntu and got something like "Your desktop is only reachable over the local network. Others can access your computer using the address 192.168.x.xxx , x.local."
-Then I noticed that "192.168.1.100" was a link to "vnc://192.168.x.xxx::5000"
-Also the "x.local" was a link to "vnc://x.local::5000"
-I already have a VNC client for PocketPC (link below) but don't know how to use it...
-my PDA connects to the internet through a (orange)3G-connection
- oh...and yes...I'd like to remote connect NOT only from the local network!
If someone already got this kind of connection working, please,please share.
Thanks!
over&out

yes you need the client on the pda and the vnc server on your linux box
if you want to be able to use it over the internet thats just a setup thing for your lan network vnc works the same no matter what the client is running on
pda, another pc a mac you name it
suggest you read up on how you setup the vnc server and client
and get it to work on your lan and then move on getting all the ports opened and or directed so your router don't block it and it should work over the internet without an probs
http://en.wikipedia.org/wiki/Virtual_Network_Computing good place to start reading

First of all, you must forward ports (5900 and 0) on your router.
Later in system preferences you'll wind remote desktop settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Setup your password, reboot the router and voila!
In VNCViewer for ppc type your ip : no 192. or 10. but the one you can find ex. here :
http://www.ip-adress.com/
So, your IP::5900 and below type your password, click connect and wait for your ubuntu desktop appear.

DONE! this is how I did it
ok! After some searching/learning/trying I finally got it working. Here is how you do it:
NOTES:
- PDA: hTC Touch Diamond with custom ROM (DiaDuit)
- PC: LinuxMint 8 (based on ubuntu 9.10 karmic koala)
- internet connection (PC): through a MSI wireless router
- internet connection (PDA): orange 3G (my provider)
1. get the VNC Client (for PDA) from below this post (vncviewer).
2. set your linux box:
- press ALT+F2 to open the "Run App" dialog
- enter "gconftool -u /desktop/gnome/remote_access/network_interface" and hit RUN
(if you don't have a karmic based linux see this for help: https://help.ubuntu.com/community/VNC/Servers)
- configure the Vino application (this is the default VNC server in ubuntu based distros): http://www.debianadmin.com/remote-desktop-sharing-in-ubuntu.html
3. configure your router (if you have one): just forward the ports 5800 and 5900 for your local IP (mine is 192.168.1.100). You can use other ports; just have to change these default ones in vncviewer and ofcourse to forward them properly.
4. find your external IP (http://www.ip-adress.com/) and enter it in the vncviewer. Type your password. Hit ENTER!
5. scare your girlfriend and make her think the computer is possessed. (Well...in fact it is ! )
Feel free to ask me about anything I failed to explain.

Hi marginean.m,
your attached file seems to be corrupt. Can you upload it again?
Thanks!

it's not a rare file you can get it without using his attachment
http://www.google.com/search?source...ewer.zip&meta=lr=&aq=f&aqi=&aql=&oq=&gs_rfai=

mdajj said:
Hi marginean.m,
your attached file seems to be corrupt. Can you upload it again?
Thanks!
Click to expand...
Click to collapse
Here it is!

[GUIDE][Tool][WindowsOnly][NonRoot] USB Reverse Tethering

Hello there!
Since the most recent guide thread ((that I found) [GUIDE] USB Reverse Tethering - New method) does is quite
complicated for many and requires root and for the sake of simplicity, I wanted to present a simpler alternative
to you here in a separate thread, which works without root and is not outdated.
If this violates any XDA rules, please close the thread.
-This method works 100% on Android 9. For other versions you need to check.
-Very useful for people whose wifi module is broken (like mine x.x)
I will attach the .zip here as well as pictures for a better understanding.
Requirements are:
-A working USB connection
-USB debugging enabled.
-A Windows computer
-adb
First, of course, we need to unzip the .zip.
In this case it doesn't matter where.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second, we need to open the console and go to the path of the extracted .zip
CD path\to\gnirhtet-rust-win64
Third, we press tab 2 times in the cmd, space, write install and press enter.
When that's finished, we press tab again twice, space and write run and press enter.
Alternatively, if "gnirehtet" is already installed, you can use the .bat, provided in the .zip to start it.
That's it! You got reverse usb tethering!

thank you for sharing, i followed the steps but didn't succeed in getting internet
i think you should mention having adb in systempath or just extract your program in adb directory
my steps were
get adb fastboot and extract it
get your program extracted inside adb directory
start cmd normally without admin rights
execute first command in your post to install ( returned success)
execute second command ( returnt 1 at the end ) but no internet
Code:
2022-07-30 00:41:44.389 ERROR Main: Cannot start client: Command adb ["reverse",
"localabstract:gnirehtet", "tcp:31416"] returned with value 1
i should am running AOSP 7.1

**solved
i report it working on AOSP 7.1
solution = use an up-dated version of adb-tools

0cold said:
**solved
i report it working on AOSP 7.1
solution = use an up-dated version of adb-tools
Click to expand...
Click to collapse
Lol

Can you host network as a hotspot using reverse tethering?
Edit: Yes you can using VPNHotspot

How to share the usb reverse tethered share via hotspot
konrino said:
Can you host network as a hotspot using reverse tethering?
Edit: Yes you can using VPNHotspot
Click to expand...
Click to collapse
How

The problem im facing is that im able to use the internet but the apps are not detecting it as an actual connection and showing no internet. Is there any way we can emulate or fake our wifi or mobile data is turned on and connected?

patelmilanun said:
The problem im facing is that im able to use the internet but the apps are not detecting it as an actual connection and showing no internet. Is there any way we can emulate or fake our wifi or mobile data is turned on and connected?
Click to expand...
Click to collapse
I think that's a problem of the application, which wants a specific connection e.g. wifi or mobile data.

actually i want to update the phone using this method to download update package

patelmilanun said:
actually i want to update the phone using this method to download update package
Click to expand...
Click to collapse
This should be no problem.

It was creating the problem but then I just reflashed whole stock ROM and bam my phone is better than before

working thank you for this program.

You may also check the re-link app at https://re-link.io, as it doesn't even need ADB on Windows, making it safer to use