Guys,
I am currently running with Epsy's Defy build of 14th July with Froyo Kernel. I am facing problems of freeze and soft reboots.
I am planning to move on Epsy's Defy+ build with GB kernel... Can you please provide me the steps? Do i need to wipe the data?
Regards,
Sameer.
Guys, Can anyone please help me out... I need to move to Defy+ Rom asap... Too many freezes...
follow these steps(if you have red lens defy):
1. wipe cache and dalvik ( if data is not necessary then wipe it also)
2. install GB kernel(Defy+ kernel)
3. install cm9 defy+ build
4. install gapps and battery fix
5. reboot
Related
Hi, I've got one question. OK, I am using defy+, android 2.3.6, cm9 nightly from for defy+. How come I can't flash cm kernel on my defy+? Whenever I flashed it and reboot, I will go straight into boot loader menu. But luckily I was able to flash full sbf and revived it again... so, any help on how to flash cm kernel on my defy+?
Hello there i'm following xda since a while now, and this time i need some help...
first, sorry if my english sound bad, it's just because i'm french... :'(
i'm trying argen2stone on my m2 just now, and i want to come back to [ROM] [02/20] MIUI 2.2.17 GB 2.3.7 + ICS Multilanguage for Milestone 2 but i don't know how to do it.
I'm lost with kernel, sbf, and all this downgrade upgrade method.
Anyone can just point me on a tutorial things or explain me how to do it ?
i've tried to just update.zip on CWM but all i obtain is a black screen (no boot at all)
i've tried lots of sbf and now i'm stuck on this one. It's working but i really want to go back to miui.
my spec :
version : 64.1.22.A953.retail.en.GB
android version : 2.3.4
baseband version : EPU93_U_00.60.00
version noyau : [email protected]#1
build : mils2_U6_4.1-22
SBF used : MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_UCXMILE2GBQWR TGB_P016_A006_HWp2a_Service1FF.sbf.gz
thx by adance for helping me to understand how i can do this !
Malekk
Before you install the zip file, try to wipe cache and dalvik first. Efter installing the zip try to boot. If still it does not work, try to wipe data he reboot again.
Hi,
I recently bought a refurb Defy and was trying to install android 4 on it. I have gone through the forum but i am confused what to do.
I have rooted my phone using Superoneclick. I have installed ROM Manager from app store. But now i am stuck.I am reading posts but i am getting confused as to what to do.
The following are the defy details
Cam -Bayer
Android Version 2.2.2
Kernel Version 2.6.32.9-ga28fcc4
BuildNumber JOREM_U3.4.2_177-3
Can anybody please help me simple steps as to how to install android 4
Follow a guide on how to instal CM7 but replace the zip file with the one from a CM9 build (for the defy, not the defy+)
Sent from my MB525 using XDA
Install guide (courtesy of nogoodusername):
A How to on flashing ICS(Defy Plus Builds)
1:Head over to Stable Recovery from boot menu
2:Wipe Data (Nandroid Backup Before Doing this [optional])
3:Install Zip from SD
4:Select ur ICS(DefyPlus) zip
5:FLash
6:Flash CM9 Kernel
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Clear Cache and Dalvik Cache
How To Flash ICS(Defy Builds)
1:Head Over To Stable recovery
2:Wipe Data
3:Install ZIp from SD Card
4:Select ICS(Defy) .zip
5:Flash
6:Flash CM7 Kernel
7:Clear Cache and Dalvik Cache
FIrst Boot will take some time...
TO CLEAR YOUR CONFUSIONS ABOUT GB KERNEL ICS AND FROYO KERNEL ICS
I have seen lot of confused user out there asking about which kernel to flash and stuff... So here u go read below...
So our beloved Awsome Developers make two types of nightlies
1-For DefyPlus(Can Also be used on Defy(RedLens))
These are the GB/CM9 kernel builds
These are found under /cm9-nightly-defy+/ folder of the servers which we have
To install these you need to follow the TuT to install ICS Defy Plus Above...
Green Lens Camera Wont work on these(Correct me if I and wrong)
2-For Regular Defy(Do not work on Defy plus)
These are Froyo/CM7 kernel Builds
These are found under /CM9-Nightly-Defy/ folder of the servers which we have.
To install these follow the TuT to install CM9 ICS FOR Defy stated above
3-Well there is no 3rd build(There is The MileStone2 Port by Walter79,But now that we have camera on our builds that one is not usefull...)
Click to expand...
Click to collapse
Basically, as labsin said, you can follow the same steps of CM7 flashing guide, but changing the build with an CM9 one and adding the correct kernel. In your case, you can choose which kernel to use, because Bayer Defy is compatible with both Froyo and Gingerbread kernels.
Questions go in the Q&A section
currently i m using cm 7.1 on my motorola defy an want to switch to miui2.4.20. what is the procedure to follow for this,do i have to wipe all data?i m from india and i m using this file to flash defy -http://www.mediafire.com/file/29r8uglmpfmi6d3/miuiandroid_Defy-2.4.20.zip. which one is better from cm7.1 and miui2.4.20, which one is more stable............sorry for my english.
"This rom was made for Defy Plus , but if you flash the kernel you can use it in a Defy. The rom i used as base was Mokee OS Revised Version by Euro_Rules"
my question is where do i find the kernel to use for my defy or will it be in the rom package when installing
thanks
Mokee OS Clean Version Defy+
i installed Mokee OS Clean Version on defy+ coming from 4.1.2 by quarx, full wipe and all, rom is working but i can't installed anything as my internal memory is 0mb!!! any ideas ??