I updated the CMW recovery via ROM manager and now my tablet is bricked. I can only get into the recovery but it does not recognize my external sdcard and this is where my rom are. so there's no way to flash the rom.
Btw, the serial# start with B50.
Does anybody know i can resolve this?
Thanks
:crying:
pcurator said:
I updated the CMW recovery via ROM manager and now my tablet is bricked. I can only get into the recovery but it does not recognize my external sdcard and this is where my rom are. so there's no way to flash the rom.
Btw, the serial# start with B50.
Does anybody know i can resolve this?
Thanks
:crying:
Click to expand...
Click to collapse
'No way to flash the rom' is not right. Seeing you have a B50, you should be able to do it with the nvflash method. Search this forum for the methods, there are a lot of threads with instructions.
Good luck.
pcurator said:
I updated the CMW recovery via ROM manager and now my tablet is bricked
Click to expand...
Click to collapse
NEVER EVER use ROM manger on the TF101, it is a well-known source of bricks.
Bad news: you lost all your data and there's no way around it.
Good news: you can use nvflash/wheelie to reflash the device.
pcurator said:
I updated the CMW recovery via ROM manager and now my tablet is bricked. I can only get into the recovery but it does not recognize my external sdcard and this is where my rom are. so there's no way to flash the rom.
Btw, the serial# start with B50.
Does anybody know i can resolve this?
Thanks
:crying:
Click to expand...
Click to collapse
You're not bricked, just needed to do a little searching.
Cold boot:
Hold Vol Down plus Power button
Wait till you see the options of Cold boot Linux or Wipe data
Choose Cold boot Linux and it should boot into the OS (Unless you wiped the system)
Use PERI to fix your recovery
http://forum.xda-developers.com/showthread.php?p=26737790
If that don't work there's a thread that show you how to fix it via terminal our adb shell.
http://forum.xda-developers.com/showthread.php?t=1530337&
Of course NVFlash work too.
Related
Hi i have a MyTouch 4G rooted with Virtuous Fusion ROM. Everything was working until when I tried to install Miui Music Player on it. I did adb push but after doing it when i unplugged the phone from my computer several Force Close came up then i rebooted my phone then the MYTOUCH Tmobile logo start up screen came then the HTC logo came then my phone will shut down. I tried to start my phone again the same thing happen. I did Hboot and tried recovery from there but it didnt work. I tried Factory Reset but it failed. I go to clockwork recovery mode if i do backup and restore or factory reset nothing happens. Does it mean my phone is gone? Is there anything i can do to fix it? Please anybody help
Try going into recovery again and just reflash fusion again.
coupetastic-droid said:
Try going into recovery again and just reflash fusion again.
Click to expand...
Click to collapse
I tried doing that i booted to clockwork recovery then on the menu any button i click like install from zip, backup and restore and so on. After i click it nothing happens its like clockwork recovery is not working. Does this mean my Phone is BRICK. I cannot fix it anymore
pching999 said:
I tried doing that i booted to clockwork recovery then on the menu any button i click like install from zip, backup and restore and so on. After i click it nothing happens its like clockwork recovery is not working. Does this mean my Phone is BRICK. I cannot fix it anymore
Click to expand...
Click to collapse
Im kind of a noob but did you reflashing cwm via adb? Do some research first though.
Also I think there is a trick to flash an older cwm via adb and then flash an older romm that needs cwm 2.xxx but I could be wrong
tjlawson09 said:
Im kind of a noob but did you reflashing cwm via adb? Do some research first though.
Also I think there is a trick to flash an older cwm via adb and then flash an older romm that needs cwm 2.xxx but I could be wrong
Click to expand...
Click to collapse
NO how do i reflash Clock work MOD through adb? Can you give me the steps to do it. I could try if it will work
pching999 said:
NO how do i reflash Clock work MOD through adb? Can you give me the steps to do it. I could try if it will work
Click to expand...
Click to collapse
Download a new copy of CWM from here. Rename the file "recovery.img" and put it in the root of your SD card. Then start ADB and enter:
Code:
adb flash_image recovery /sdcard/recovery.img
TeeJay3800 said:
Download a new copy of CWM from here. Rename the file "recovery.img" and put it in the root of your SD card. Then start ADB and enter:
Code:
adb flash_image recovery /sdcard/recovery.img
Click to expand...
Click to collapse
when i use the track pad it worked but what should i do next do i have to do a back up and restore or reflash the custom rom
pching999 said:
when i use the track pad it worked but what should i do next do i have to do a back up and restore or reflash the custom rom
Click to expand...
Click to collapse
See my post in your other thread. It sounds like your recovery is fine, so all you need to do is wipe and re-flash.
TeeJay3800 said:
See my post in your other thread. It sounds like your recovery is fine, so all you need to do is wipe and re-flash.
Click to expand...
Click to collapse
Hi im having problem with data connection 3G/4G (H) before i was getting H most of the time but now its 3G most of the time. Can you help me how to fix this. Also do you know what version of Miui Music Player is best for Mytouch 4G running on Virtuous Fusion ROM. I like the one with graphic equalizer when playing songs. Can you suggest something and how to install it
Thanks
Didn't think bricking was possible but I can't seem to get out of CWM. I was running the honeycomb revolver rom and decided to download ota rootkeeper and then revolver parts. After downloading those apps, revolver parts asked to reboot into recovery to flash the updated zip. Did that and I've been stuck in CWM ever since. I even tried factory resetting. It does the reset but then stays at CWM screen. Won't let me boot out of it. Does anyone know what I should do? I can't even power down the device so basically it's sitting at the CWM screen all the time. Ughhhh. Any help would be greatly appreciated.
Sent from my PG86100 using Tapatalk
if you have cwm 5504 , take a look here:
http://forum.xda-developers.com/showthread.php?t=1530337
I am on CWM 5504 but can't seem to access your link. (at least not via Tapatalk app) will take a look later thanks.
Sent from my PG86100 using Tapatalk
ok , its a cwm 5504 known problem , easy solution , dont worry
the thread is : Troubleshooting/Solved] ClockworkMod recovery 5.5.0.4 from Koush
Have you tried cold booting into the OS? Power it on using volume down and power button. As soon as you see the white text just release both buttons and it should attempt a cold boot into the OS. This would let you know if you're still able to access the OS or not.
The above referenced post has all the info you'll need to fix your problem. It'll just be easier to fix if you still have access to the OS.
jinwu57 said:
Didn't think bricking was possible but I can't seem to get out of CWM. I was running the honeycomb revolver rom and decided to download ota rootkeeper and then revolver parts. After downloading those apps, revolver parts asked to reboot into recovery to flash the updated zip. Did that and I've been stuck in CWM ever since. I even tried factory resetting. It does the reset but then stays at CWM screen. Won't let me boot out of it. Does anyone know what I should do? I can't even power down the device so basically it's sitting at the CWM screen all the time. Ughhhh. Any help would be greatly appreciated.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yeah...just go back to Rogue CWM. If all you do is flash Roms like most here on xda ...its all you need. Plus it got external SD mode.
SiNJiN76 said:
Yeah...just go back to Rogue CWM. If all you do is flash Roms like most here on xda ...its all you need. Plus it got external SD mode.
Click to expand...
Click to collapse
All i do is flash roms and don't really understand all the elements of ADB. What is Rogue CWM? From what I read, it seems like I have to use ADB to push either a new rom or a new version of CWM to my device?
jinwu57 said:
All i do is flash roms and don't really understand all the elements of ADB. What is Rogue CWM? From what I read, it seems like I have to use ADB to push either a new rom or a new version of CWM to my device?
Click to expand...
Click to collapse
Team Rouge CWM is a different version of CWM. It's a version that will read from both the internal sd as well as the external micro sd card.
Under normal circumstance you can simply flash a different version of recovery but if you're in a recovery bootloop because of the Koush's CWM 5.5.0.4 version. You'll have to follow partio's link to solve the problems.
Now if you can cold boot into the OS, you can move all the necessary files there without the need of ADB. (Just hook TF up to PC and drag/drop files to internal sd.
If you can't get out of CWM recovery you'll need ADB to push the files to to internal sd.
jinwu57 said:
All i do is flash roms and don't really understand all the elements of ADB. What is Rogue CWM? From what I read, it seems like I have to use ADB to push either a new rom or a new version of CWM to my device?
Click to expand...
Click to collapse
Rogue cwm is just a modified version of cwm. It gets rid of the 100 no options to confirm a flash....and has flash from external SD.
Good luck in getting out of the 5.5.0.4...
I tried cold booting...no go. I guess I'll have to try the ADB method. Thanks for the understanding of recoveries. I have a co worker who is going to try and help me with ADB since i've never used it.
*How will my PC know that I've plugged my tf in, if Im stuck in the recovery mode?(i guess this is probably ADB basics =/)
This is a good thread for setting up ADB.
http://forum.xda-developers.com/showthread.php?t=1071584
ADB required USB debugging to be turn on.
Not sure how one would go about turning that on if you can't get into settings.
IIRC you should be able to get into adb through recovery. I'll have to boot into recovery to remember the way, but I am fairly certain it is possible. Maybe through Advanced->Mounts and Storage?
I FINALLY DID IT!! Cold boot way!!
i flashed the CWM update zip, booted into CWM, wiped, and now im trying to install the EOS rom
it goes smoothly and i get no errors, but it boots into CWM every single boot now.,,
Pushed the older 6006 cwm and flashed, no errors, still boots into 6010.. ?
http://forum.xda-developers.com/showthread.php?p=22897771
Found this thread. For transformer Prime but hopefully it fixes my issue. If this is a bad idea lmk.
If not, Will try around midnight when I get back home
Woops,
Found this too
http://forum.xda-developers.com/showthread.php?t=1781250
Did you flash the CWM.zip in TWRP? I ask because there was a known issue when flashing CWM from TWRP you would get stuck in a recovery loop. I had the same issue and had to flash the stock .img to get out of it. Good luck.
i flashed the CWM zip that was posted in the CWM thread, bout to try and get myself free..
::success.
booted into bootloader
flashed bootloader, restarted, booted into my rom...
rebooted back into bootloader
flashed recovery
wipe/flash normally
I'm in the same exact situation, Could you share with me how you got it to boot into bootloader? I've been trying for awhile now. As I'm stuck in CWM I'm thus far unable to use adb. I'm a total adb noob so there is probably something quite simple I'm missing. Thanks in advance for any help.
Vektor67 said:
I'm in the same exact situation, Could you share with me how you got it to boot into bootloader? I've been trying for awhile now. As I'm stuck in CWM I'm thus far unable to use adb. I'm a total adb noob so there is probably something quite simple I'm missing. Thanks in advance for any help.
Click to expand...
Click to collapse
Press volume down when it boots (right before and while the Google logo shows up)
jamesst20 said:
Press volume down when it boots (right before and while the Google logo shows up)
Click to expand...
Click to collapse
Thanks for the reply, I've tried that many times. It's not working. I wish I had read this thread carefully and learned that it might be dangerous to flash cwm zip from TWRP, I had no idea.
The thing is is that it never really shuts down properly(thought I remembered a power off option on one of my epic 4g cwm) So when I press the power button while on the reboot system now option, that is what it does but back to recovery. I tried the volume button as you suggested as well as every other combination I could think of. :~(
Well in messing with drivers(uninstalling old drivers/devices installing universal naked driver) I had the nexus 7 q3 tool waiting for adb to enter fastboot and reflash TWRP so I could restore) and the tool suceeded in kicking me into fastboot(with an error in the toolkit) The toolkit stopped communicating though. I want to use the toolkit to reflash back to stock now that I'm in the bootloader screen.
I'm a bit nervous though, some warning about flashing asus stock blobs being a sure way to HardBrick. I think I'll wait until I get better information. I am on the bootloader screen, but I'm certain my bootloader as it sits is messed up from flashing CWM.
*Edit* Success!! I used this ; "[Guide] Returning to Stock and/or Unbricking your device"located here, http://forum.xda-developers.com/showthread.php?t=1781250 (not sure how to go about inserting a descriptive link sry :~( I'm now back to stock and ready to brick it again...umm, I mean, root and flash like there's no tomorrow. hehe Thanks for the input.:good::good:
Hi,
I'm having a problem with my boys Galaxy Y S5360, it's stuck in a boot loop i can still get into both revovery and upload modes and still have access to the sd card.
I tried reinstalling factory software but that just removed CWM 5 and i'm still stuck with the boot loop help!!!!!!!!!!!!!!!! :crying:
When you post things like this in the development section don't expect any help.
Post in the right section.
Thread reported.
Get stock rom and reflash your phone with odin.
Edit: You can get the info on how to do it in the correct section.
Sent from my GT-S5360 using Tapatalk 2
jammychap said:
Hi,
I'm having a problem with my boys Galaxy Y S5360, it's stuck in a boot loop i can still get into both revovery and upload modes and still have access to the sd card.
I tried reinstalling factory software but that just removed CWM 5 and i'm still stuck with the boot loop help!!!!!!!!!!!!!!!! :crying:
Click to expand...
Click to collapse
you can either format data in cwm or in stock recovery format data/reset
or if that doesnt sort the boot loop quickest way to solve it is just to flash stock rom via odin
Remember next time before you do anything like flashing a mod or trying out something different to always make a nandroid backup in cwm - this way if you get into a boot loop or want to revert what you have done you just have to restore your nandroid backup
anyway stock rom firmware is found on my thread below
http://forum.xda-developers.com/showthread.php?t=2568853
HellBoy.007 said:
When you post things like this in the development section don't expect any help.
Post in the right section.
Thread reported.
Click to expand...
Click to collapse
Yep sorry, my mistake consider me told off
marcussmith2626 said:
you can either format data in cwm or in stock recovery format data/reset
or if that doesnt sort the boot loop quickest way to solve it is just to flash stock rom via odin
Remember next time before you do anything like flashing a mod or trying out something different to always make a nandroid backup in cwm - this way if you get into a boot loop or want to revert what you have done you just have to restore your nandroid backup
anyway stock rom firmware is found on my thread below
http://forum.xda-developers.com/showthread.php?t=2568853
Click to expand...
Click to collapse
Hi ya mate,
I'm following your instructions but it's hanging on setup connection, i am using odin 3.07 in admin mode, not sure whats going on here, by the way there is no CWM installed at the mo it's reset to factory boot menu after trying someone elses method
jammychap said:
Hi ya mate,
I'm following your instructions but it's hanging on setup connection, i am using odin 3.07 in admin mode, not sure whats going on here, by the way there is no CWM installed at the mo it's reset to factory boot menu after trying someone elses method
Click to expand...
Click to collapse
follow the instructions fully on my thread
you need to install the usb drivers
you need to put your phone into download mode (vol down home button power button)
cwm is not required and not used to flash stock rom via odin - you must be in download mode NOT recovery mode
marcussmith2626 said:
follow the instructions fully on my thread
you need to install the usb drivers
you need to put your phone into download mode (vol down home button power button)
cwm is not required and not used to flash stock rom via odin - you must be in download mode NOT recovery mode
Click to expand...
Click to collapse
ok we got there in the end, i had 2 versions of odin in the same folder and it was locking it up some how, separated, rebooted windows and it worked thanks.
now back to the start, ive just rooted it again now need to add some recovery, what one would you guys recommend?
jammychap said:
ok we got there in the end, i had 2 versions of odin in the same folder and it was locking it up some how, separated, rebooted windows and it worked thanks.
now back to the start, ive just rooted it again now need to add some recovery, what one would you guys recommend?
Click to expand...
Click to collapse
if on stock kernel use a tempory cwm zip in stock recovery to get to cwm (need to do it each time you want to enter cwm
http://d-h.st/u2m
or flash any kernel that has a perminant cwm - your choice dont ask me to suggest
Ok thanks, I've got a kernel installed and a rom, got a couple of issues but I'll take that to the correct thread now
Sent from my GT-I9300 using Tapatalk
All sorted now, installed Hyperion 9 rom, got one happy lad
I have rooted m.o.j.o. I instaled in Kernel twrp 2.8.2.0 and now m.o.j.o is ded - just grey screen. Please help
mojogrey said:
I have rooted m.o.j.o. I instaled in Kernel twrp 2.8.2.0 and now m.o.j.o is ded - just grey screen. Please help
Click to expand...
Click to collapse
Re-read the thread for the recovery. Then download the stock firmware, place it on a micro-SD card in the MOJO. Boot the MOJO to fastboot mode, then TWRP and reinstall the stock firmware.
You could also use one of the custom ROMs rather than stock if you'd rather. But make sure you understand the instructions before you start flashing. Ask for help before if necessary, it makes things much easier.
kevinthefixer - thank you a lot for your answer, it was very helpfull. Now the mojo is OK. (sorry for my english, and for so late)
Nothing to be sorry for. Enjoy!
Similar Problem
kevinthefixer said:
Re-read the thread for the recovery. Then download the stock firmware, place it on a micro-SD card in the MOJO. Boot the MOJO to fastboot mode, then TWRP and reinstall the stock firmware.
You could also use one of the custom ROMs rather than stock if you'd rather. But make sure you understand the instructions before you start flashing. Ask for help before if necessary, it makes things much easier.
Click to expand...
Click to collapse
I've got a similar problem but I think I wiped the OS off my system using TWRP - because when it starts to go into fastboot mode it brings up a message saying "drivers not found - Booting into OS", but nothing happens. But I can't seem to get it to boot into TWRP? How do I do this? I backed up the original kernel onto my micro SD card...
Msr Blobby said:
I've got a similar problem but I think I wiped the OS off my system using TWRP - because when it starts to go into fastboot mode it brings up a message saying "drivers not found - Booting into OS", but nothing happens. But I can't seem to get it to boot into TWRP? How do I do this? I backed up the original kernel onto my micro SD card...
Click to expand...
Click to collapse
Please don't double-post like this. I answered you in the other thread. Good luck.