Database Users

Screen fading to white ongoing issue- MONEY AHEAD!

Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test

Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.

This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike

mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).

It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.

Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.

jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike

I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!

I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.

BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!

My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.

jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike

Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?

VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike

Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)

Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far

FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike

Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.

yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike

White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers

Help me get an antique xda going

Hello, I will start by saying despite my aged condition i have only recently (in the last week) been seduced to the ownership of any sort of mobile phone. I have one that works fine. But in my investigations a friend offered and gave me a XDA exec (O2) mainly to stop me moaning about the silly way text messages are entered with out a Qwerty keyboard. Unfortunately the phone seem to be dead. Or at least in a coma (as it has some life signs).
The symptoms are, White screen, not much else, odd times my eight year old got the keyboard lights on and thats about it, plain white screen. I have investigated the net for answers and tried. Reset (power, back light and reset), taking out battery and replacing, taking out the battery over night, i investigated 02's web site which i found of very little help, the user manual there etc presupposes some sort of information on the screen ! I seized on the idea that a Rom Upgrade might help but all links to that i have found are dead.
I installed Activcync to my PC and the phone syncs up allowing me to see that there is indeed things on it the windows files etc. Which gave me hope that it isn't totally dead.
So any suggestions? can i do anything with this impressive looking paperweight?

Hi,
From your description I would say you have a hardware fault regarding your screen.
Either the cable is broken, not correctly connected or the LCD itself has a defect.
What let's me conclude that is:
- you say you will get a white screen: this means the backlight is working
- you say ActiveSync will recognize the phone and you can browse its contents: this means that the device is working (except for the screen) and that it is not like stuck in the bootloader, or so
- you say your daughter managed to get the keyboard lights on: this means they are working... this, by the way, only happens when the device is in the dark and thats probably why you did not manage to do it yourself
From now, your options are:
- sell the device as broken and get up to 100 Euro on eBay for it
- buy a working Universal at eBay, at prices starting at 140 Euro (better condition will cost more)
or
- get the PDF that explains how to disassemble the device
- check if all cables are properly connected
- check if there is something you can (and know howto) repair
and eventualy
- buy a new display, which will cost 100 Euro or more
So to tell the truth, the easiest option is to actually sell the phone as broken and get a second hand one, which is not broken...
Or get a second hand one (not broken) and keep yours for spare parts.
Cheers,
vma

ah thank you for the step by step reasoning there, i have to agree...
I don't want to sell it, it was given to me and if i cant get it going i'd rather pass it on in the same way.
I will look for the pdf and see if i can confidently have a look inside... many thanks.

A small investigation inside reveals no obviously loose cabled etc.. Oh well!
again many thanks.

I've passed it on to someone who is more electronically knowledgeable than me, i hope he can get it going and use it...

HTC Repairs Suck!

2 weeks ago, my HD suffered a problem where it would randomly reboot. Eventually it would not power up at all. I have just received my phone back from HTC repair centre, and after 2 hours of use..... guess what ...... same problem is happening again. According to the repair sheet, the main board was replaced - but obviously not the cause of the fault. I've been without the phone for over a week now and i rely on it for work.
I was contsantly tracking the progress on line, and the repair took less than an hour, with probably 2 hours of testing.....
Anyone else had similar issues? Should i push for a new phone rather than repair, as it seems they can't even get this right.......

ardsar said:
According to the repair sheet, the main board was replaced
Click to expand...
Click to collapse
i dont buy that. it would be cheaper to just give you a new one. they probably noticed a faulty connection and tried to fix it.
when this sort of thing hapens, you should allways try to get a new one.
write an e-mail complaining to the htc headquarters, maybe someone will hear you.
gretz

Business requires backups
ardsar said:
I've been without the phone for over a week now and i rely on it for work.
Click to expand...
Click to collapse
Consider keeping a backup phone for these issues: when I bought the Touch Pro I kept my Tilt, and damned glad I did.

After changing motherboard, it should be a new machine internally.
The same symptom should not occur unless it is software problem.
Did you try using it without installing extra programmes?
Did you install any special program afterwards??
If yes, you should do a trial run after each installation.

am thinking along this line too... is it a bad program?

The only app that was installed was lumos to control the backlight, however no one else has reported isues with this killing the device.
To me it sounds like the power module is at fault, causing stress on the main board. They fixed what was damaged but not the cause. Surely the device should have been power soaked before returning.

lumos is ok on mine..

zuadao said:
i dont buy that. it would be cheaper to just give you a new one. they probably noticed a faulty connection and tried to fix it.
when this sort of thing hapens, you should allways try to get a new one.
write an e-mail complaining to the htc headquarters, maybe someone will hear you.
gretz
Click to expand...
Click to collapse
The phone came back with a new IMEA number, so they did replace the main board.

pretty tricky problem imo .. fancy not fixed even with change of mainboard

Well after contacting HTC again, they want me to send the phone back - this time with the battery. Can't really see how the battery can kill the device, unless it is trying too pull to much current during charging? Surely there must be a protection circuit to gaurd against this..........
Does anyone have an email address for HTC - other than the "automated response" ones which reply with useless comments?

Microphone stopped working

Anyone else had this problem yet? Had mine since Oct. 4th
I didn't try to do a data wipe. Just took it to T-mobile for a replacement. Didn't want it to start working again because I had got a scratch on my phone anyways and it was a good opportunity to get a replacement.

Me too. When I use my headphone, people on the other line can't hear me. This happen more than once. I try to do a hard reset but it still don't work.... anyone have any solution.

tino888 said:
Me too. When I use my headphone, people on the other line can't hear me. This happen more than once. I try to do a hard reset but it still don't work.... anyone have any solution.
Click to expand...
Click to collapse
My issue was the microphone on the phone. Did you not buy from T-mobile or other authorized outlet? Your phone should be within warranty.
Another thing to try would be a Data wipe/factory reset.
Another thing I noticed is that when I charge my phone there is an LED in the earpiece. My last G2's LED must have been defective.

Hi, what happen if you buy the phone from craiglist, how can I return ?

tino888 said:
Hi, what happen if you buy the phone from craiglist, how can I return ?
Click to expand...
Click to collapse
Contact HTC about warranty service I guess. I don't understand why someone would sell the phone on craigslist when it is within the 14 day return policy for tmobile where you can get a full refund unless maybe it was stolen.
You can contact HTC here: http://www.htc.com/europe/CA_Hotline.aspx?region=NorthAmerica

I'm just speculating here, but it's based on past experience with flexible connectors like the one used to bridge the display portion to the body. I'm surprised to see the possible defect occurring so early in life of this handset, but the fact that the ribbon is forced to bend back 180 with a radius of less than 1mm when the display is open puts a LOT of stress on the thin conductors of the ribbon. The problem might have been precluded by HTC using carbon traces rather than typical metallic copper on this critical component. See for yourself by looking at your phone edgewise next time you flip it open. If we're lucky and enough handsets fail like this HTC MIGHT do something of a product recall. Incidentally, has anyone with a dead mic also experienced random screen garbage or erratic touch response? Again I point to the same design flaw.
Here's to hoping I'm dead wrong guys!

This problem just happened to me. With no apparent reason, the internal speaker stopped working. People can hear me, but I can´t hear anything.
Funny thing tho, if I activate the external speaker, it works. The problem is the internal speaker only.
Is it a known problem like the shoddy usb connector on some kaisers ?

tino888 said:
Hi, what happen if you buy the phone from craiglist, how can I return ?
Click to expand...
Click to collapse
dont say anything to tmobile about where you bought it from. there is a one year warranty the original date of purchase. at least there was with the motorola cliq that i got off craigslist. returned it for a fab'd one without scratches gonna do it one more time right before the year is up haha

My G2's mic has also stopped working, been looking around different websites for parts, but I can't seem to find it, u guys know anyone?
If I use it with the headphones/mic, it works fine, people hear me and all. If not, people can't hear me.

FWIW, I had this exact problem shortly before Christmas. the mic started by cutting out sometimes, then failing altogether. Using an external mic worked fine so it wasn't software, just the physical connection to the built in mic. I'm pretty sure that sivalley is right in his speculation that the issue is the flexible ribbon connector.
Fortunately for me my phone was under warranty and HTC arranged to pick it up etc.
Weirdly the day before they were due to pick it up, the whole screen stopped working. I could power up and feel the vibration etc, but the screen never came on. Again I think the common factor was the flexible ribbon.
When HTC repaired it it came with a long list of things they'd replaced to get it working again, so it may not be as simple as just replacing a ribbon connector.
I have no idea whether it's possible to source the parts, but it might be worth finding out how much HTC would charge to fix it if it's not under warranty (could still be a good deal)

Note 4 screen locking up intermittently

Hi all
[Originally posted this in the Verizon Note 4 forum accidentally, so apologies if you've seen it already]
My Note 4 screen has started locking up (i.e. continuing to work in the background and the screen is still responding to system events (SMS notifications etc) but it is not responding to touch.
I have tried several factory resets, after which the screen stays responsive for about 3 or 4 pages, then locks up again.
Background: the phone was rooted about a year ago, to get around the SD card restriction, and has worked fine up until the last week. I gave the phone to a friend who put CWM-based recovery manager and the latest Samsung Android 5.1.1 on it. After setting the phone up successfully and downloading all my apps on to it and getting everything running perfectly, I used CWM to back up the OS image onto the SD card.
Phone worked great for about a day, then started freezing. Wiping the caches / restoring / factory resets and all permutations of these have so far proved ineffective...
I took the phone in to a repair shop last night, the guy reckoned the problem was down to a poor screen replacement, and they hadn't used the correct bonding cement, and that the screen had separated from the LCD such that capacitance couldn't do its thing.
However if this were the case, the screen would not work at all, even briefly after a system reset.
The repairer is simply dismantling and rebuilding the phone to see if it's a loose/dirty connector somewhere. He's not going to try to fix it with firmware/software.
Any pointers or suggestions gratefully received
Vaughan

I was getting stutters like this, and after a month my phone started shutting down when I hit 50% or so. I replaced the battery off eBay, and that cleared the problem up. I think sine quickcharge 2.0 batteries fail faster than they should, but a Sammy battery is only $6.50 or so, so I don't mind buying one more often fir the quickcharge benefits.
Maybe try a new battery?

Samsung original screen replacements always come with AMOLED+Touchscreen.
If the guy only replaced the touchscreen you have a fake one and yeah i don't need to tell you about chinese replica's quality.
I myself work at a smartphone repair shop and we only use original products to get the best quality for our customers. It's more expensive that way i know but thats better than putting sh*t in there ands the customer needs to come back with the phone.

SquirtingCherry said:
Samsung original screen replacements always come with AMOLED+Touchscreen.
If the guy only replaced the touchscreen you have a fake one and yeah i don't need to tell you about chinese replica's quality.
I myself work at a smartphone repair shop and we only use original products to get the best quality for our customers. It's more expensive that way i know but thats better than putting sh*t in there ands the customer needs to come back with the phone.
Click to expand...
Click to collapse
Thanks for that Mr Cherry..
So it's the dodgy glass doing it? It's definitely not the genuine Samsung part as it gets covered in grease as soon as you touch it.
The weird thing is, if it was the glass then I'd assume it wouldn't work at all; whereas when I do a factory reset it works for a short while then stops...
Baffling.