DEV[Q] Clairification GT-P5113 Stock ROM and ODIN counter reset - Galaxy Tab 2 General

I have a new shiny tab, was reading up on the counter reset, and my question is what has changed about the GT-P5113 or variant tabs, that prevents access to the block where the counter resides, i am a linux user and would be willing to help figure this out, and second isnt their a way to clone the stock ROM for the P5113, not refering to nandroid, meant more a zip in case someone botches their tab, again with a little direction id love to help, the dev forms restrict me from posting there

you should see a thread about TRIANGLEAWAY ,it is an application made by chainfire which resets the binary counter for SALAXY NOTE ,S2 AND S3 ,you should contact him for further info

Ok so i got the ball rolling sent a PM to chainfire, second part of the question if anybody knows, ive always been curious how to clone the stock ROM and turn it into a plain zip in case i blow my machine away, the p5113 wifi only doesnt have one for itself we got to use the p5100 image, now with the unroot zip and great work already done it will be easier to do, some general guidence on the general steps would be nice, id love to help i have ample experience in linux windows and have flashed many devices just never helped much in the ROM developement, any help would be great thankx xda....

Odin 4.43 multi downloader
Is Odin Multidownloader compatible with Galaxy Tab 2 10.1 ??
Ive been trying to reload the stock rom with it from this tutorial but it wont recognize
the device.
http://forum.xda-developers.com/showthread.php?t=1922505
Ive tried WITH and WITHOUT KIES installed. Have the samsung drivers installed I used to root
but nothing shows up. It shows up with Odin3-v1.85_3 but no matter what I do, on a differnet PC trying
even, the GT-P5113 never shows up in odin 4.43 multidownloader. What is wrong??

hardhouseinc said:
Ive tried WITH and WITHOUT KIES installed. Have the samsung drivers installed I used to root
but nothing shows up. It shows up with Odin3-v1.85_3 but no matter what I do, on a differnet PC trying
even, the GT-P5113 never shows up in odin 4.43 multidownloader. What is wrong??
Click to expand...
Click to collapse
The download mode is not the first screen you see with the bootloader. You need to volume up or down to make a selection.

king200 said:
The download mode is not the first screen you see with the bootloader. You need to volume up or down to make a selection.
Click to expand...
Click to collapse
I'm not using CWM mode before I plug in the
Tablet to download from Odin.
The directions say enter Odin Mode with
Power button plus volume up button, isn't
That right?

Related

Having an impossible time flashing CM11 rom, been at it for hours please HELP

This used to be easy.
After 8 hours yesterday I think I managed to root the phone. CWM/TWRP will not install. At all, under any method. Rom manager, goo manager, I now get this stupid message that says that "an application attempted to access something unauthorized and has been blocked" over and over.
Just trying to flash CM11 rom. Guess I need to learn how to sideload or something? I physically can't get my phone to recovery mode other than the stock Android, which does not have the "flash zip from sdcard" option.
For the love of god help me. My phone stopped working around 2 pm yesterday and I seriously can't believe I'm about to be going into day 2 of this, so rather than drive myself crazy i'm going to wait for help
bump please help should be simple
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
XxLordxX said:
Hi,
Please, don't panic! Panic is your worst enemy . First, give a good read here: http://forum.xda-developers.com/showthread.php?t=2419762. Then try again . It's very likely Knox is blocking your TWRP/CWM installation, that's why you receive this message.
All the best,
~Lord
Click to expand...
Click to collapse
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Damani311 said:
thanks
knox is disabled
root is gained
su is installed
rom manager and goo manager installed
when i downloaded the CM rom from goo manager and try to install it, the phone restarts in download mode and just sits there...
Click to expand...
Click to collapse
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
XxLordxX said:
Hi,
You need to flash the recovery via Odin . After flashing the recovery via Odin you'll be able to flash the ROM normally .
All the best,
~Lord
Click to expand...
Click to collapse
tried flashing four different CWM tars, all are failing.
also trying to flash TWRP
its just all failing on the install
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
XxLordxX said:
Hi,
Please post your installation issue on the Galaxy S4 Help Thread there might be someone better than me to help you there. Also are you sure you're flashing the right files and using the right method? Did you try another USB Cable? Did you try another Odin version? It all can contribute to the fail.
~Lord
Click to expand...
Click to collapse
its the official samsung cable. and yes i tried others
tried other versions of odin as well
and different versions of both twrp and cwm
its crazy i tells ya xD
If it fails to flash true Odin, then you are doing something wrong.
- Different pc
- Reinstall drivers
- Different cable
- Different usb port
- Make sure kies is not running in the background
What are you running? Windows 8? Try a windows 7 pc.
Post the details of the error you are getting.
Also when the flash goes succesfull, but you still don't have a custom recovery, then uncheck auto-reboot.
can someone please link me to a guaranteed working version of a flashable recovery for odin ?
I know its a lot to ask but I've actually gone through almost that entire list you listed
tried diff cables
no kies runnning
on windows 7
drivers been installed twice
maybe i should try the other port, but in case that doesnt work can anyone just link me? sorry i've just never had this much problems with this, must be b/c of the new security knox update or w/e in oct of last year. Last June I did all this in about 15 minutes....
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
dwarfer66 said:
I had the same trouble with the knox crap yesterday, the only way I could get it rooted and/or with custom recovery was to use the Cyanogen windows installer, then when CM booted I then rebooted into recovery and installed a different rom from there. :good:
Click to expand...
Click to collapse
that's crazy
so where do i find this windows installer? i'm just trying to put CM on there so I suppose this would work
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
189cutter said:
Hi i know youve already said said its officail cable but im saying try another different s4 cable. Because when i was installing recovery or anything it wouldnt let me (i thought i had original white s4 cable) but then i got my dads cable (hes gt s4) and it worked instantly. These fake cables are at large and its very very difficult to tell if its original.
Also like previous guy said using a different computer/laptop also helps i know because ive flashed my phones since day 1.
GL and plz let me know if u managed to fix it another way as its always good to try new options when others fail.
Click to expand...
Click to collapse
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Damani311 said:
alright it'd be awesome if someone can post a link to the files the work, for sure.
CM windows installer
CWM odin tar file
TWRP odin tar file
Click to expand...
Click to collapse
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
dwarfer66 said:
http://www.cyanogenmod.org/ then click the start button and follow the instructions.
It will get you to download the installer (or http://dist01.slc.cyngn.com/CMInstaller.msi?t=1403660099360) the click it to run, It may download an update for itself, then it will download recovery, operating system, gapps, then start to install everything. About 300mb altogether.
That way you don't need the tar files, just search on this sight for flashable from recovery for the recovery files you want. (I use the touch versions myself).
Click to expand...
Click to collapse
thanks, but naturally this would be too easy
says: "not supported on your device"
a freaking S4 AT&T! what the ****?
From what I've read AT&T have locked bootloaders. Glad I have an unlocked Australian version!
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Damani311 said:
Yeah so if anyone can still find a way to help me that'd be awesome. Wasted two days already and rather not be stuck with stock
Click to expand...
Click to collapse
So do you have an AT&T phone? If you do, you are in the wrong section of the forum.

[Q] Bricked S5 Exynos Variant....

Hi XDA!!
I am experiencing problems on my Samsung Galaxy S5 Exynos variant (SM-G900H).
It has been soft-bricked. I can clearly say so as it can boot into stock recovery and in download mode, but not in stock 4.4.2.....
It has been bricked due to following the steps mentioned in this thread : s health and xposed
Many videos on youtube ask the viewer to flash stock Samsung Firmware from sammobile.com using odin in download mode.
I have a problem even there.... all versions of odin get stuck on initializing......
Tried on all USB ports.... Kies closed..... basically done everything everybody wrote on XDA.
Any new bright ideas would be appreciated....
Thanks in advance!!:good::good:
skb_twiz said:
It has been soft-bricked. I can clearly say so as it can boot into stock recovery and in download mode,
Click to expand...
Click to collapse
You need to do more reading. A lot more.
You clearly haven't tried everything yet. Nor are you are bricked if you can boot into recovery mode. It sounds like you have messed up the system files preventing a normal boot.
Odin is the most common way of recovering. Use Odin 3.09, ensure that you have disabled anti virus, malware amd firewall software and do not have intensive programs running in the background. If necessary use a different computer.
Flash a full stock firmware, ideally the same version as the current firmware on your phone. But in any event, not an older version and matching your current CSC /carrier /baseband. And you ought to make the effort to find the correct PIT file and flash it at the same time. This insures that you don't have any lingering partition corruption. A forum search will explain all about PIT files. And someone probably has a thread with the actual files too.
It will work. In the worst case, you will just need to find a different PC.
.
fffft said:
You need to do more reading. A lot more.
You clearly haven't tried everything yet. Nor are you are bricked if you can boot into recovery mode. It sounds like you have messed up the system files preventing a normal boot.
Odin is the most common way of recovering. Use Odin 3.09, ensure that you have disabled anti virus, malware amd firewall software and do not have intensive programs running in the background. If necessary use a different computer.
Flash a full stock firmware, ideally the same version as the current firmware on your phone. But in any event, not an older version and matching your current CSC /carrier /baseband. And you ought to make the effort to find the correct PIT file and flash it at the same time. This insures that you don't have any lingering partition corruption. A forum search will explain all about PIT files. And someone probably has a thread with the actual files too.
It will work. In the worst case, you will just need to find a different PC.
.
Click to expand...
Click to collapse
You seriously think that I don't mean it when I said that I had tried everything?? All steps you mentioned have been tried before I read your reply... Anyways, going on a different PC helped... apparently Odin is quite moody.... If it decides it is not going to run on a PC, it simply will get stuck on initialization... hence the solution is to find a PC which has run Odin before... It will work on that PC definitely!!! If you can't find one, try running on all PC's in your vicinity (friend's, family etc). There will be one that can run Odin...
And by the way, I clearly said my phone is "soft-bricked"... It means that I can boot only into recovery or download... not android... so my friend, you are quite wrong in saying that my phone isn't bricked...
Sent from my SM-G900H using XDA Free mobile app
skb_twiz said:
You seriously think that I don't mean it when I said that I had tried everything?? All steps you mentioned have been tried before I read your reply... Anyways, going on a different PC helped... apparently Odin is quite moody.... If it decides it is not going to run on a PC, it simply will get stuck on initialization... hence the solution is to find a PC which has run Odin before... It will work on that PC definitely!!! If you can't find one, try running on all PC's in your vicinity (friend's, family etc). There will be one that can run Odin...
And by the way, I clearly said my phone is "soft-bricked"... It means that I can boot only into recovery or download... not android... so my friend, you are quite wrong in saying that my phone isn't bricked...
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
Did you try a data factory reset/clear the caches in recovery and reboot and go one from there?
gee2012 said:
Did you try a data factory reset/clear the caches in recovery and reboot and go one from there?
Click to expand...
Click to collapse
Yes... but to no avail... anyways... like I said above, flash the stock firmware in download mode again using Odin... If Odin gets stuck, try it on a different PC...
I will not recommend anyone to do data factory reset as
(1) It won't do anything that helps you
(2) If you don't reset your phone, you can still retain your apps and settings after flashing the stock firmware again!!
<i>LOL, here I am, posting solutions to my own problem!!</i>
same
skb_twiz said:
Yes... but to no avail... anyways... like I said above, flash the stock firmware in download mode again using Odin... If Odin gets stuck, try it on a different PC...
I will not recommend anyone to do data factory reset as
(1) It won't do anything that helps you
(2) If you don't reset your phone, you can still retain your apps and settings after flashing the stock firmware again!!
<i>LOL, here I am, posting solutions to my own problem!!</i>
Click to expand...
Click to collapse
I am an exynos man, and have fewer options and waiting for better prospects OR 6 months of purchase to pass before tinkering. Anyway I appreciate u posting the solutions you found for your own problem. See you have gained a THANKS point from me.
suchiqaz said:
See you have gained a THANKS point from me.
Click to expand...
Click to collapse
I have thanked you for thanking me...
For everyone else, this thread will remain open forever even though my S5 is back up and running...
This thread is now no longer limited to the Exynos variant... All are welcome...
Any problem regarding unbricking any S5 can be discussed here and I will try my best to help you...
Sent from my Reborn GALAXY S5

need help guys at&t s4 brick. desperately

hi xda guys this is my story
i have an at&t samsung s4 on android 4.2 i have tried to update it via wifi to 4.4
but no use. a message appear say's " your device is up to date "
i have tied "loki way" it failed
i have tried "odin tool way' it failed it won't complete the process
i have tried samsung kais it fail's too a message says no update for this device
***** i managed to root the device
and then i found the safestrap apk i have insert the TWRP recovery
i have made a backup in case something go's wrong
and i have tries to flash a clean google s4 4.4.4 rom
**** and then the the phone stuck of samsung logo and vibrate often .the TWRP is lost
**** i have tried to recover the the via samsung kias it made it wors
now it have message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
i have tried via odin using the official firmware that i have downloaded. but did not work also
i have tried the kais recovery mode but i did not get the recovery code
help my friend what should i do
nead you help desperately
When you try Odin what fails? Are you using the mdl firmware? I assume you're on MDL? You haven't updated the firmware?
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
jd1639 said:
When you try Odin what fails? Are you using the mdl firmware? I assume you're on MDL? You haven't updated the firmware?
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
Click to expand...
Click to collapse
Every time I have had and issue with a ROM or forget to flash loki I have no issues just ODIN back to 4.2.2 MDL. I say try it again.
MF3
jd1639 said:
When you try Odin what fails? Are you using the mdl firmware? I assume you're on MDL? You haven't updated the firmware?
Sent from my SAMSUNG-SGH-I727 using XDA Free mobile app
Click to expand...
Click to collapse
yes my friend
the device firmware ends with MF3
i think it's MDL
it had a 4.2.2 official firmware
but i tried ti flash this rom using safestrap recovery : "GalaxyS4-CWM-6.0.4.4-GT-i9505.tar"
after that my device stuck in samsung logo screen with vibration
i hop hear from you soon
myounis said:
yes my friend
the device firmware ends with MF3
i think it's MDL
it had a 4.2.2 official firmware
but i tried ti flash this rom using safestrap recovery : "GalaxyS4-CWM-6.0.4.4-GT-i9505.tar"
after that my device stuck in samsung logo screen with vibration
i hop hear from you soon
Click to expand...
Click to collapse
YOU DONT FLASH .tar files in recovery ........... i9505 is not your device i337 is yours .. No wonder it bricked ...
this will unbrick your phone FOLLOW INSTRUCTIONS Exactly ... If you are on MF3 your bootloader is locked
http://forum.xda-developers.com/showthread.php?t=2663545
It in the second post ..Full Nb1 update .. Or Mk2 which ever you desire
GalaxyS4-CWM-6.0.4.4-GT-i9505.tar This is not a ROM its a recovery .. I suggest reading a lot more before proceeding .. Your device has a locked bootloader if firmware is MF3 ... Read the Q/A and much more it will save you a ton of time .. You need to flash device specific roms and recoveries else you are gonna crash and burn
If you are on MF3 like you said then you can only flash Safestrap compatible roms .. I need a little more info ???
myounis said:
yes my friend
the device firmware ends with MF3
i think it's MDL
it had a 4.2.2 official firmware
but i tried ti flash this rom using safestrap recovery : "GalaxyS4-CWM-6.0.4.4-GT-i9505.tar"
after that my device stuck in samsung logo screen with vibration
i hop hear from you soon
Click to expand...
Click to collapse
You are on mf3 firmware. Flashing the mdl firmware won't work. That's the problem you're having. I would recommend you upgrade and flash the nb1 tar file. Read this http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 5 using XDA Free mobile app
spirodave said:
YOU DONT FLASH .tar files in recovery ........... i9505 is not your device i337 is yours .. No wonder it bricked ...
this will unbrick your phone FOLLOW INSTRUCTIONS Exactly ... If you are on MF3 your bootloader is locked
http://forum.xda-developers.com/showthread.php?t=2663545
It in the second post ..Full Nb1 update .. Or Mk2 which ever you desire
GalaxyS4-CWM-6.0.4.4-GT-i9505.tar This is not a ROM its a recovery .. I suggest reading a lot more before proceeding .. Your device has a locked bootloader if firmware is MF3 ... Read the Q/A and much more it will save you a ton of time .. You need to flash device specific roms and recoveries else you are gonna crash and burn
If you are on MF3 like you said then you can only flash Safestrap compatible roms .. I need a little more info ???
Click to expand...
Click to collapse
yes my friend
sorry my misstake i have flashed this room : Danvdh-GE-4.4.4-07172014.zip
And it works--
rugmankc said:
And it works--
Click to expand...
Click to collapse
no my friend this rom made my device bootloop / brick
samsung logo only with vibration
***
i think onid is the answer
can any one link me an MF3 stock rom
to try??!!
i can't not find any
I think you missed something--
You can't run aosp roms at all
On MF3 only 4.3 afaik
As mentioned do a lot of reading in those threads before going on--saves headaches--:good:
Best would be to upgrade to NB1, those instructions are in those threads too--:good:
myounis said:
no my friend this rom made my device bootloop / brick
samsung logo only with vibration
***
i think onid is the answer
can any one link me an MF3 stock rom
to try??!!
i can't not find any
Click to expand...
Click to collapse
Im gonna save you a bunch of time ................You are on MF3 ...Your BootLoader is locked ... You can only flash Safe Strap Roms aka HyperDrive or GoldenEye based off stock .. You can only use safestrap to install recovery ... Anything else will render your device useless.
Check the General Section ... Send you a link isn't gonna help ... You need to read multiple threads ...CHECK THE GENERAL SECTION
LOCKED BOOTLOADER= NO AOSP ROMS = ONLY ROMS BASED OFF STOCK
LOOK FOR A THREAD IN THE GENERAL SECTION CALLED DEBRICK
thank for you help all
i have fix it
i have download this link :
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE
from
http://forum.xda-developers.com/showthread.php?t=2502003
and flash it with oden
what a relief
:highfive:
myounis said:
thank for you help all
i have fix it
i have download this link :
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE
from
http://forum.xda-developers.com/showthread.php?t=2502003
and flash it with oden
what a relief
:highfive:
Click to expand...
Click to collapse
:good::good::good:
Same issue but mk2 has me struggling
Sorry to hijack, but I didn't want to start a new thread on this same issue.
I have the AT&T S4 i337 , running MK2. I bought it used, and every time it boots up it shows "safestrap disabled" with 2 buttons below: recovery or system. Recovery button takes you to the TWRP recovery, the other button boots the phone. The phone worked well but the stock rom and bloat were killing me (my previous phones were rooted Epic and Relay). I wanted to root and flash a custom ROM but I wasn't aware of the locked bootloader and mk2/mf3 issues with this phone. Now I am soft bricked, and I've tried many ways to fix (odin, recovery flash,adb ), but it always fails. Here is my path, and what I've tried:
1. I rooted using Saferoot.
2. Tried to flash Philz Touch CWM from SD card in recovery (1st BIG mistake). Didn't work, but didn't brick either.
3. I saw guut13's index and ran backups on twrp recovery and on kies.
4. decided to update (before proceeding with a new rom). tried to OTA update, but it failed.
5. tried to install nb1 (stock odin tar) using heimdall (it couldn't find pit file) and odin (failed to complete write).
6. unrooted (hoping to fix update issues) and then tried Kies firmware upgrade. This process hung and I had to force quit. And thus began the soft brick.
This pattern repeated a few times:
7. flash stock mf3 tar with odin [Complete(Write) operation failed]
8. odin'd mk2 tar , then md1, then mf3 again, all fail to complete write.
9. Phone freezes and will only go into download mode (or bootloop).
10. the ONLY thing that odin can flash is a mj9 recovery file (sometimes). then recovery comes up, I wipe dalvik/cache/system (everything but the sd card) and fix permissions.
11. rinse and repeat. lol
12. I find a jflte pit file that will flash by odin.
13. I start trying stock tars again in odin, hoping the pit helps. same failure.
14. tried to odin an entire mf3 package (bootloader, modem, csc, the works). still same write fail.
15. the only file that flashes other than the pit, is a stock mk2 recovery file.
16. tried to slip a stock mk2 rom zip on my sd and flash from there... failed.
17. installed sdk and tried to sideload, but my computer won't recognize my S4. also can't run adb shell. (yes, i installed the platform tools, and opened prompt window from inside the platform tools folder). {perhaps my vmware fusion (Win8) running on my mac (OS 10.9) is causing a port id issue, but odin connects easily every time....hmm....}
18. Tried rubbing the phone against my head and laughing while trying not to cry, softly whispering "I hate your soul...."
19. Tried 5 different usb cables, including 2 blackberry cables that always connect other samsungs to odin.
20. tried factory reset thru stock recovery , which I can still reach by booting and holding volume up. odd note, this recovery says "i337ucufnb1".
So, I have tried odin-flashing every stock rom for i337 (mdl-nc1), but odin fails to write complete, and my phone says "bar 240, 400" or "sw rev check fail".
What can I try next? I can only think maybe to try using a different PC (not easy since I don't know anyone here but mac users) or smashing the phone under my tire..... would uninstalling safestrap help? I feel like theres a confilct between the stock nb1 recovery and safestrap..... but I can't get in the adb shell to delete it.
anyone had these write fails with odin before? I have always thought no matter what happens, I could always factory wipe and start over with a stock rom in odin, but now, the locksmith says no dice.
Thanks for any advice, I am sure I've forgotten a few details, but I hope I gave enough info for those who wish to assist. Thanks.
I would try to find a Windows pc and flash the nb1 tar in Odin
I'm assuming you're using this but if not it's what you want http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
I would try to find a Windows pc and flash the nb1 tar in Odin
Click to expand...
Click to collapse
yeah, 4 years ago I had trouble getting virtual pc's to let my mac and epic both speak odin. But I thought now that they connect easily (and flash pits and some recovery with no prob) it was a better match (as in , vmware's Windows 8, running on a 2.8ghz macbook pro).
What stinks is I have a real pc (old tower running xp) for exactly this purpose, but I never got a licensed version of windows on it and the crap I got off torrents doesnt work anymore. I hate the thought of buying a crap PC OS that I will only use once every 3 years.
Epiclectic said:
yeah, 4 years ago I had trouble getting virtual pc's to let my mac and epic both speak odin. But I thought now that they connect easily (and flash pits and some recovery with no prob) it was a better match (as in , vmware's Windows 8, running on a 2.8ghz macbook pro).
What stinks is I have a real pc (old tower running xp) for exactly this purpose, but I never got a licensed version of windows on it and the crap I got off torrents doesnt work anymore. I hate the thought of buying a crap PC OS that I will only use once every 3 years.
Click to expand...
Click to collapse
Yea, my 16 year old has a crap Mac now all he ever uses is my crap Windows pc to play his games. Go figure.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yea, my 16 year old has a crap Mac now all he ever uses is my crap Windows pc to play his games. Go figure.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
For a wide selection of games (and upgradable graphics), PC has a definite edge over Mac. PC also has the advantage of being cheaper to buy and upgrade. If I were going to game all day or outfit 50+ employee workstations, PC would be the obvious choice. But for day to day, I still like the way Mac works, hands down. (Tho as PC improves, and Mac continues dumbing down for the masses, this gap is starting to shrink, much like the import vs domestic car market.)
If my old PC tower could run Win8, I would just buy a licensed copy and use that for Odin. But I'm pretty sure it's maxed out at xp, tho it might run vista really slowly, lol. My other option is to try bootcamp to boot up my macbook as an actual Win8 PC, but if that doesnt solve the Odin issues, then I've spent money on a microsoft product I can't even use. I like android phones' customizing options and layout better than iphone (no back button? wtf? lol), so unless android starts making latop OS, I guess I'm stuck in this Mac/android limbo...
Epiclectic said:
Sorry to hijack, but I didn't want to start a new thread on this same issue.
I have the AT&T S4 i337 , running MK2. I bought it used, and every time it boots up it shows "safestrap disabled" with 2 buttons below: recovery or system. Recovery button takes you to the TWRP recovery, the other button boots the phone. The phone worked well but the stock rom and bloat were killing me (my previous phones were rooted Epic and Relay). I wanted to root and flash a custom ROM but I wasn't aware of the locked bootloader and mk2/mf3 issues with this phone. Now I am soft bricked, and I've tried many ways to fix (odin, recovery flash,adb ), but it always fails. Here is my path, and what I've tried:
1. I rooted using Saferoot.
2. Tried to flash Philz Touch CWM from SD card in recovery (1st BIG mistake). Didn't work, but didn't brick either.
3. I saw guut13's index and ran backups on twrp recovery and on kies.
4. decided to update (before proceeding with a new rom). tried to OTA update, but it failed.
5. tried to install nb1 (stock odin tar) using heimdall (it couldn't find pit file) and odin (failed to complete write).
6. unrooted (hoping to fix update issues) and then tried Kies firmware upgrade. This process hung and I had to force quit. And thus began the soft brick.
This pattern repeated a few times:
7. flash stock mf3 tar with odin [Complete(Write) operation failed]
8. odin'd mk2 tar , then md1, then mf3 again, all fail to complete write.
9. Phone freezes and will only go into download mode (or bootloop).
10. the ONLY thing that odin can flash is a mj9 recovery file (sometimes). then recovery comes up, I wipe dalvik/cache/system (everything but the sd card) and fix permissions.
11. rinse and repeat. lol
12. I find a jflte pit file that will flash by odin.
13. I start trying stock tars again in odin, hoping the pit helps. same failure.
14. tried to odin an entire mf3 package (bootloader, modem, csc, the works). still same write fail.
15. the only file that flashes other than the pit, is a stock mk2 recovery file.
16. tried to slip a stock mk2 rom zip on my sd and flash from there... failed.
17. installed sdk and tried to sideload, but my computer won't recognize my S4. also can't run adb shell. (yes, i installed the platform tools, and opened prompt window from inside the platform tools folder). {perhaps my vmware fusion (Win8) running on my mac (OS 10.9) is causing a port id issue, but odin connects easily every time....hmm....}
18. Tried rubbing the phone against my head and laughing while trying not to cry, softly whispering "I hate your soul...."
19. Tried 5 different usb cables, including 2 blackberry cables that always connect other samsungs to odin.
20. tried factory reset thru stock recovery , which I can still reach by booting and holding volume up. odd note, this recovery says "i337ucufnb1".
So, I have tried odin-flashing every stock rom for i337 (mdl-nc1), but odin fails to write complete, and my phone says "bar 240, 400" or "sw rev check fail".
What can I try next? I can only think maybe to try using a different PC (not easy since I don't know anyone here but mac users) or smashing the phone under my tire..... would uninstalling safestrap help? I feel like theres a confilct between the stock nb1 recovery and safestrap..... but I can't get in the adb shell to delete it.
anyone had these write fails with odin before? I have always thought no matter what happens, I could always factory wipe and start over with a stock rom in odin, but now, the locksmith says no dice.
Thanks for any advice, I am sure I've forgotten a few details, but I hope I gave enough info for those who wish to assist. Thanks.
Click to expand...
Click to collapse
my friend
if the mk2 is the same mf3
then download this link : https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE
more details here : http://forum.xda-developers.com/showthread.php?t=2502003
place the 4 files in to odin
and flash them... it worked for me
and if not the same as mf3
look for mk2 ota update build from 4 files
it will reset you phone to factory firmware
i hop it will work for you
Epiclectic said:
For a wide selection of games (and upgradable graphics), PC has a definite edge over Mac. PC also has the advantage of being cheaper to buy and upgrade. If I were going to game all day or outfit 50+ employee workstations, PC would be the obvious choice. But for day to day, I still like the way Mac works, hands down. (Tho as PC improves, and Mac continues dumbing down for the masses, this gap is starting to shrink, much like the import vs domestic car market.)
If my old PC tower could run Win8, I would just buy a licensed copy and use that for Odin. But I'm pretty sure it's maxed out at xp, tho it might run vista really slowly, lol. My other option is to try bootcamp to boot up my macbook as an actual Win8 PC, but if that doesnt solve the Odin issues, then I've spent money on a microsoft product I can't even use. I like android phones' customizing options and layout better than iphone (no back button? wtf? lol), so unless android starts making latop OS, I guess I'm stuck in this Mac/android limbo...
Click to expand...
Click to collapse
Consider installing Win7. Licenses can be had cheaply or just install, use for couple days for Odin (before it license locks) then wipe...
Sent from my SAMSUNG-SGH-I337 using Tapatalk

[Q] Galaxy Tab 4 Soft-Bricked After trying to root

Hi im new to this really i recently got the tab 4 and needed to root it so i can mirror my screen with the chrome-cast doggle for an application xbmc . I found guide on internet to use Odin to root it and ive used Odin before to root a few phones but when i tried to use the PDA option within ordin to apply the tar file that was in zip - CF-Auto-Root.tar the process started but then failed for some reason. The device then said i need to kies to emergency firmware restore but kies 3 said it does not support my device. Ive been looking for solution on net to no joy and now device must of died or somit but all i get is black screen and wont turn on. please help....
Tyandroid said:
Hi im new to this really i recently got the tab 4 and needed to root it so i can mirror my screen with the chrome-cast doggle for an application xbmc . I found guide on internet to use Odin to root it and ive used Odin before to root a few phones but when i tried to use the PDA option within ordin to apply the tar file that was in zip - CF-Auto-Root.tar the process started but then failed for some reason. The device then said i need to kies to emergency firmware restore but kies 3 said it does not support my device. Ive been looking for solution on net to no joy and now device must of died or somit but all i get is black screen and wont turn on. please help....
Click to expand...
Click to collapse
Which Tab4 do you have? Tmobile? If so I have a zip file you can use to odin back to stock. I had the same thing happen to me when I tried to root. Once it gets to that point, kies doesn't seem to function. But odin still recognizes the device. I have an SM-T337T. Let me know.
Could you post the link of the rooting method site please?
Sent from my SM-T530NU using Tapatalk
1116
magda623 said:
Which Tab4 do you have? Tmobile? If so I have a zip file you can use to odin back to stock. I had the same thing happen to me when I tried to root. Once it gets to that point, kies doesn't seem to function. But odin still recognizes the device. I have an SM-T337T. Let me know.
Click to expand...
Click to collapse
MY galaxy tab 4 is the wifi version model SM-T230 and ive been trying to get stock file even tho its at that screen where it says
Firmware upgrade uncounted an issue. please select recovery mode in kies and try again.
its still in download mode so odin will fix it in theory. i downloaded this file named ;
T230NUUEU0ANE2_T230NUXAC0ANE2_HOME.tar.md5 but think its for another model coz of the NU after T230 that never worked and been looking for my model to to avail and im still green when you come to this i feel like im out my depth.
now when i connect it to kies it says device not supported and screen flashes on off. im using a win xp machine will that make any difference aswell.
thank you
Tyandroid said:
MY galaxy tab 4 is the wifi version model SM-T230 and ive been trying to get stock file even tho its at that screen where it says
Firmware upgrade uncounted an issue. please select recovery mode in kies and try again.
its still in download mode so odin will fix it in theory. i downloaded this file named ;
T230NUUEU0ANE2_T230NUXAC0ANE2_HOME.tar.md5 but think its for another model coz of the NU after T230 that never worked and been looking for my model to to avail and im still green when you come to this i feel like im out my depth.
now when i connect it to kies it says device not supported and screen flashes on off. im using a win xp machine will that make any difference aswell.
thank you
Click to expand...
Click to collapse
Only think i've found for that firmware is a UK version. Not quite sure why there isn't a US version readily available. Anyhow, You can download it from here. The version from June might be able to be rooted using towelroot. But the May version definately can be rooted using that method. Here is the link Hope it helps.
http://www.sammobile.com/firmwares/1/?model=SM-T230&pcode=BTU#firmware

bricked sm-t580

i have the T580 32GB of a friend here, that does not work at the moment (and maybe never again ) - the problem is that on startup it only gives this message in red letter :
could not do normal boot invalid kernel length
Click to expand...
Click to collapse
the only thing i can do is get into download mode - but i fail when i try to install a stock rom via odin - after NAND Write Start!! it times out and gives me a fail.
i already tried a 3 different odin versions and adroid 6.0, 7.0 and 8.01 Stock Rom for SM-T580 but no luck so far.
another problem is my friend does not know what the android version he was on before that hapend - and the tablet has Samsung FRP on.
maybe some of the experts here have an advice what i can try otherwise this tab a is really bricked - furthermore i wonder how this could happen as my friend swears he did not try to put twrp or anything else onto the tablet ....
Have you tried flashing TWRP using ODIN? (AP Slot)
i do not know if flashing twrp is a good idea as i do not know if oem unlock is enabled - and as it does not boot up i cannot switch it on in developer options
ilovebytes said:
i do not know if flashing twrp is a good idea as i do not know if oem unlock is enabled - and as it does not boot up i cannot switch it on in developer options
Click to expand...
Click to collapse
Wouldn't it simply fail if OEM unlocking was disabled? I don't know honestly. I'd try it if no other solutions come up.
ilovebytes said:
i have the T580 32GB of a friend here, that does not work at the moment (and maybe never again ) - the problem is that on startup it only gives this message in red letter :
the only thing i can do is get into download mode - but i fail when i try to install a stock rom via odin - after NAND Write Start!! it times out and gives me a fail.
i already tried a 3 different odin versions and adroid 6.0, 7.0 and 8.01 Stock Rom for SM-T580 but no luck so far.
another problem is my friend does not know what the android version he was on before that hapend - and the tablet has Samsung FRP on.
maybe some of the experts here have an advice what i can try otherwise this tab a is really bricked - furthermore i wonder how this could happen as my friend swears he did not try to put twrp or anything else onto the tablet ....
Click to expand...
Click to collapse
I think you are going about it wrong. Instead of booting to download mode, try booting to recovery mode via Home, Vol Up and Power and then selecting Factory Reset. This is always necessary before you can use download to flash a ROM via Odin and it might make using Odin unnecessary.
of course i tried to get into receovery mode but the problem is i can't - when i do home, vol up and power absolutely nothing happens, i only get into download mode
edit: i believe FRP is the Problem this prevents odin from writing the files to the tablet - as it allways times out with :
Complete(Write) operation failed.
Click to expand...
Click to collapse
what i do not really understand is why FRP does not let odin flash an original samsung firmware ?
[QUOTE what i do not really understand is why FRP does not let odin flash an original samsung firmware ?[/QUOTE]
This sounds more like a binary issue. I have reason to believe you are what's called an FRP Binary Lock. Recovery is usually inaccessable or re-routed and you cannot "seem" to use Odin3 but in fact you can. This issue you apparently are having sounds oddly like some issues I've had on these devices and is often a result of bad Rooting or invalid firmware being installed. This overloads the binaries and puts the device in a locked mode with symptoms of an inaccessible Recovery a difficult to use Odin3 or a bootloop. Most of the time I hear of a notification somewhere of an FRP lock. If this is the situation you are in here is a link to a page of mine that will give you the files to helpfully solve your issue. Let me know if that works or not.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Casper Young said:
If this is the situation you are in here is a link to a page of mine that will give you the files to helpfully solve your issue. Let me know if that works or not.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Click to expand...
Click to collapse
it sounds like i am in the same situation and i tried your files but it does not let me download them through odin - i also wrote you a pm maybe you find the time to answer me.
i really wonder how this could happen as my friend swears he did never try to flash anything onto the tab, and i really believe him as he absolutely knows nothing about flashing or where to get a firmware and not even how to get into dl mode ....
ilovebytes said:
it sounds like i am in the same situation and i tried your files but it does not let me download them through odin - i also wrote you a pm maybe you find the time to answer me.
i really wonder how this could happen as my friend swears he did never try to flash anything onto the tab, and i really believe him as he absolutely knows nothing about flashing or where to get a firmware and not even how to get into dl mode ....
Click to expand...
Click to collapse
The situation I was suspecting is a "Custom Binaries are Blocked by FRP Lock" to which you would have seen a notification of it in one of 4 ways. Your situation is somewhat similar because you cannot access Recovey and although Download Mode is accessable it appears useless. Your device is not Bricked. A bricked device is unusable in any way and these days most devices can be restored.
You do seem to be having some difficulties that are usually common with binary issues. You can in fact use Odin3 but how is the question. Usually one can flash in the Stock firmware and that returns the device to normal. When it becomes impossible to flash in stock firmware or anything else it seems, to my experiance has always been a Binary issue. I will provide a link to the 4File Official firmware. And instructions for you to properly use it for your needs.
SM-T580 Official Stock Firmware 4Files
https://drive.google.com/open?id=1zvhwUfSRW44V1ZwEsHLRvlh-T0M79ks9
I'll assume you know something about using Odin3. Unzip the file to your desktop. There are 4 files but you'll only use 3 of them. You can use the patched version of Odin3.13B or you can use Odin3.14. Place the files in their respective places. BL, and AP are easy enough to see where they go. Now there is a file labeled CSC and one labeled HOME CSC. You will only use one of them. The CSC file returns your app data to factory settings (it erases everything). The Home CSC file keeps the app data. So it's your choice which one you choose. These are Official Firmware Files so you should be able to flash them in. Should that not work for you my most likely answer would be that your binaries are the issue and that is why you can't as of yet use Odin sucessfully. Does Odin even try to initiate a flash then stalls or does it do nothing altogether?
There are two different Binary files for the SM-T580 that I have. I would suggest using the Binary 4 FRP first. f I recall correctly the Odin3.13B patched version was made for this. Place the file in the AP section and try flashing it. You should get a few gears on the screen turning if it applied, or maybe not. If that fails use the U4 Binary Unlock file. It is only after you flash in the binary files that you can then install the Stock Firmware. It is the overloaded binaries that prevent the use of Odin as you may be experiancing. I am also including the Knox cleaner in case you need to reset it.
SM-T580 Binary files:
Binary 4 FRP Unlock
https://drive.google.com/open?id=1iXrZR2E7m6Ai5InAw8u3lzeLhb3ThRo5
U4 Binaries. This is two files. Flash one at a time using the AP section. They are labeled 1rst or 2nd
1. https://drive.google.com/open?id=1rX_luP_0W4ygdloIr2Gr9TCSfqFyaTK-
2. https://drive.google.com/open?id=1xsw4GVYtNMJhiMXV2cR2jaJvToG_n6Pi
Knox Cleaner: Also flashed in using the AP section of Odin3
https://drive.google.com/open?id=1EolYe9auY9jslYSpSgHoon_YB00D2noV
Good Luck and let me know if this helps or not.
lewmur said:
I think you are going about it wrong. Instead of booting to download mode, try booting to recovery mode via Home, Vol Up and Power and then selecting Factory Reset. This is always necessary before you can use download to flash a ROM via Odin and it might make using Odin unnecessary.
Click to expand...
Click to collapse
Only if they could get into Recovery they may be able to reset it.
I have never once needed to go to Recovery to do "anything" before using Odin3 to flash.
The only time I've had to go there (repetedly) and reset was when trying to get past FRP Google Account Protection. Sometimes it takes out the page I want to get to and I need to reset it to get to it again. This is "not" always neccesary before flashing a ROM which rewrites the device programing.
sorry for double post
@Casper Young
thanks for your help so far, i am gonna try your suggestions on weekend when i have a bit more spare time - hope i can get the tab running again

Categories

Resources