Database Users

[UPDATE] DEODEX+ROOT - it`s easy!

For all, who want to DEODEX and ROOT their SGA.
Thanks to the Russian folk-author finist1 every owner of the SGA can easily, without having any additional knowledge, without using a computer perform the procedure of DEODEX and ROOT.
Read carefully before do anything.
Step by step procedure:
0. you must have already installed the appropriate firmware version.
1. download zip-file appropriate to your firmware version.
2. copy zip-file to the root of your SD-card.
3. connect your phone to an external power source (USB, for example) because update fairly large and long established.
4. boot into recovery mode (Home + Power)
5. navigate with volume button, then select wipe data/factory reset (so before do anything - back up personal data)
5. navigate with volume button, then select apply update from sdcard
6. select your zip-file
7. navigate with volume button, then select reboot system now
Now you have completely clean system with DEODEX and ROOT.
Download update appropriate to your firmware version:
OS 2.2.1 S5830XXKC1
OS 2.3.3 S5830XXKPE
OS 2.3.4 S5830XXKPH
OS 2.3.4 S5830XXKPL
OS 2.3.4 S5830ZCKA7
OS 2.3.4 S5830DDKQ5
OS 2.3.4 S5830DXKPB
OS 2.3.4 S5830DXKPB DEODEXED+CWM+CF-ROOT b80 for flashing with ODIN (pda+modem). Mirror
OS 2.3.4 S5830DXKPD
Notes for S5830DXKPD:
This update is only inserts deodexed files, it does not erase your data and your apps and framework. But do not forget to wipe the cache!
OS 2.3.5 S5830XXKPO Thanks to INFINUM from 4pda.ru
DDKQ6 2.3.4
Thanks to this method, you can easily delete unwanted applications from update before performing the procedure. Just open your downloaded file and remove unwanted applications from system\app directory of your archive.
(You must know and understand what applications can be removed without harm to your system.)
Then, perform the procedure described above using your archive.
New versions of Samsung`s FW are very difficult to deodex&root, thats why there is new method:
This update are fully equivalent to full re-flashing!!! You will loose all your data!!!
You can apply this update to any FW`s version you want.
Localization are Russian, Ukrainian and English ONLY.
1. This update is a full FW
2. You can install it with recovery
3. This update will format your partitions to ext4
4. S5830XWKPY_S5830SEKKP6 - CF-b80 and CWM4 are included
S5830XWKS9_S5830XWKS2 - CM7 kernel and CWM4 are included
5. Full deodex and root.
6. DT will work with this.
7. !!!Do not work Scripts from a folder init.d!!!
Download:
S5830XWKPY_S5830SEKKP6
S5830XWKS9_S5830XWKS2
New full-working versions:​This is an independent firmware with deodex, root, ext4 for all partitions, working scripts from init.d folder (allinone Ram Script included) and autobackup of all user data on every boot to your SD card.
Thanks to finist1.
ос 2.3.5 S5830XWKS9_S5830XWKS2
ос 2.3.3 S5830XWKPY_S530XWKP8
ос 2.3.5 S5830XXKPO_S5830XXKPO_S5830XXKPO
CF-82, CWM 5.0.2.6, DEODEX, Autobackup, languages: english, russian, ukrain.
S5830BUKS2_S5830XWKS2
S5830XXKPP_S5830XXKPP with extended power menu (thanks to INFINUM)
another version: OS 2.3.6 S5830SERKPP Deodex full

Is the factory reset really necessary?

pujitjuneja said:
Is the factory reset really necessary?
Click to expand...
Click to collapse
same thing i wanted to ask..!!

pujitjuneja said:
Is the factory reset really necessary?
Click to expand...
Click to collapse
Reset is not required, but needed just in case.

will this work if you already have root?

superples said:
will this work if you already have root?
Click to expand...
Click to collapse
Yes, this will work.
Any way, you can (if you want) unroot first with this update (do it from recovery mode):

Today I am edit update for KPH and use it, this program, which I deleted, cos I don`t use them:
Street.apk, GenieWidget.apk, Maps.apk, bookstore2_v37.apk, Forest.apk, GoogleQuickSearchBox.apk, Hangman.apk, musicodp_v15.apk, SamsungApps.apk, SamsungWidget_StockClock.apk, thinkdroid.apk, DualClock.apk, AxT9IME.apk
And all work just fine.

Question
is this possible to add Persian support to this update ? if yes i must change font and libskia.so liskiagl.so and libswebcore.so ? can i use file from official rom of galaxy s ? or 2.2.1 o galaxy ace ?

hero2003 said:
is this possible to add Persian support to this update ? if yes i must change font and libskia.so liskiagl.so and libswebcore.so ? can i use file from official rom of galaxy s ? or 2.2.1 o galaxy ace ?
Click to expand...
Click to collapse
all these updates are only for european version of firmware. For region XX. If you can, you must modify updates for you region, but you need original firmware for this. If something goes wrong you allways can flash original firmware with the help of ODIN.

Lovetz said:
Today I am edit update for KPH and use it, this program, which I deleted, cos I don`t use them:
Street.apk, GenieWidget.apk, Maps.apk, bookstore2_v37.apk, Forest.apk, GoogleQuickSearchBox.apk, Hangman.apk, musicodp_v15.apk, SamsungApps.apk, SamsungWidget_StockClock.apk, thinkdroid.apk, DualClock.apk, AxT9IME.apk
And all work just fine.
Click to expand...
Click to collapse
Hey..
How u edited those applications..
Means did u just downloaded attached deodex file..extract the same..delete not required apps from system/app and repack using winzip..??
Is this the procedure..??

Lovetz said:
all these updates are only for european version of firmware. For region XX. If you can, you must modify updates for you region, but you need original firmware for this. If something goes wrong you allways can flash original firmware with the help of ODIN.
Click to expand...
Click to collapse
thx for reply , but i dont rly know which file i must inc. in this update , i got hebfix.zip update for KPE and VR rom it work fine for em but now i need new update .

silver2706 said:
Hey..
How u edited those applications..
Means did u just downloaded attached deodex file..extract the same..delete not required apps from system/app and repack using winzip..??
Is this the procedure..??
Click to expand...
Click to collapse
Just delete these .apk from zip. I use Total Commander for this operation.
You can include your apps to update:
1. Install your app to SD
2. Copy lib and apk of installed app
3. Paste these files to the system path of update
4. Use your update from recovery mode.
But you must understand that the place in the systems is not unlimited.
You can even do separete update for your apps. For example attached update will add to you system apps Puffin Web Browser.

hero2003 said:
thx for reply , but i dont rly know which file i must inc. in this update , i got hebfix.zip update for KPE and VR rom it work fine for em but now i need new update .
Click to expand...
Click to collapse
You can try to use your hebfix.zip update for KPE. If something wrong you can flash original firmware with the help of ODIN.

hero2003 said:
thx for reply , but i dont rly know which file i must inc. in this update , i got hebfix.zip update for KPE and VR rom it work fine for em but now i need new update .
Click to expand...
Click to collapse
here r the files for that u need to replace for heb fix.
u need to dodex your framwork and replace the framework file and lib files .
i think that u can replace those files in update.zip that u have for KPE .

Hey..after i installed this update..my internal memory used 58.14 MB..???
Normally..setup used 25 MB od internal space...This update used that much of internal memory space..???
Pls tell me the benefit of this update...

silver2706 said:
Pls tell me the benefit of this update...
Click to expand...
Click to collapse
You can use the search on the forum or by Google in order to find out what is deodex and why you need it.
If you do not know why you need it, then most likely you do not need it at all.)

Before Deodex i have only 13 MB free memory in system folder when i deodexed i have 32 MB free memory in system folder. Check with root explorer.

Lovetz..I did it..but i m nt software professional..so couldnot understand..so..pl if u can tell me in brief..it will nice of u..
And it consume that much of memory..is this normal..???
Sent from my GT-S5830 using XDA App

silver2706 said:
And it consume that much of memory..is this normal..???
Click to expand...
Click to collapse
Have you do a wipe before you make update?
Any way If you just flash clean KPH you have ~150 Mb of free space.
If you wipe and then use this update, then you have ~135 Mb of free space.
And this is normal.

Lovetz said:
Have you do a wipe before you make update?
Any way If you just flash clean KPH you have ~150 Mb of free space.
If you wipe and then use this update, then you have ~135 Mb of free space.
And this is normal.
Click to expand...
Click to collapse
I did wipeout..before update..and normally after KPH free space with me was 155..buy after update..free space was 121 mb..
Sent from my GT-S5830 using XDA App

Kph cwm recovery+rtl updated

hay to all.
i created CWM recovery that including :
1.CF-Root adaptation for Gingerbread from this guide-
http://forum.xda-developers.com/showthread.php?t=1158197
2. fix RTL lang
3. built in GB keyboard
4. boot animation
5. crt
6.extended power off menu
i didnt include dtapps2sd ,if u want it you can install it.
how to use it ?
1. download the archive.
2. extract and copy to your sdcard without changing the folders.
*if u did backup with CWM before just copy the last folder to yours
/clockworkmod/backup.
3.reboot to recovery mod
4. restore
5. reboot your phone.
6. convert your file system to ext4 with ext4 apk (allready installed)
*if your partition allready ext4 you dont need to convert your file system.
*ext4 will not work on CWM 4.09 the phone will stay at samasung boot logo after restart.
7.dodex
good luck.
link for CWM recovery
http://50207fd0.yyv.co

I didn't read instructions , so it's a cwm backup

Hello,
is deodex included? Cause i'm not right now

Sgace said:
Hello,
is deodex included? Cause i'm not right now
Click to expand...
Click to collapse
it's deodexed, but rtl not working on facebook/browser/gmail/email

wanam said:
it's deodexed, but rtl not working on facebook/browser/gmail/email
Click to expand...
Click to collapse
THNXX m8.
Keep up the good work guys.

wanam said:
it's deodexed, but rtl not working on facebook/browser/gmail/email
Click to expand...
Click to collapse
im working with exchange and mails r showing ok.
facebook dont support rtl also in my computer
browser-support, is it in some page or not support at all for u.
gmail-known issue for RTL support.

izador said:
im working with exchange and mails r showing ok.
facebook dont support rtl also in my computer
browser-support, is it in some page or not support at all for u.
gmail-known issue for RTL support.
Click to expand...
Click to collapse
Tested many Arabic web sites on browser, but no rtl, but it's working on Google+, twitter...
Good work izador, Plz remove Rootexplorer from the backup.

i removed the link will upload a new one tomorrow.
thanks.

Good work but why doont work ext4 with cwm 4.0.9 really dont work?

Hey man, thnxx.
Used it and love it.
Keep up the good work.
Maybe it's a good idea if more people do this? So that we can swap experiences in more reallive and see what others have on their ACE.

hi I have froyo can I flash this file

HyperDroid ROM discussion and support Thread (with FAQ in post #3)

As the title suggests, this is a thread for all the HyperDroid ROM discussion or questions.
The idea of this thread is to keep away all questions from development thread, which do not belong to.
This way Team HyperDroid can get to work without having to answer the all so annoying questions that get asked over, and over, and over again.
Please do only post at development thread, if you have considered the following words from Pongster:
If you're having trouble with anything, the only way we can find out what's causing your Issues is If we have complete information.
The logcat/wakelocks/dmesg will do just that...
Simply reporting something doesn't work, will not help... we all have different devices, different setups, different device manufacturing dates, etc...
If everything is set to default, everything works on our devices.
:: NEW :: IRC channel for chat and support :: NEW ::
Click to expand...
Click to collapse
FAQ (Thanks to malhor)
Click to expand...
Click to collapse
Download Links for Base Roms
Base Roms
Click to expand...
Click to collapse
Download Links for surgeons & themes
Surgeons and themes descriptions
Doc's surgeons
Pongster's surgeon available OTA in ROM tool
ICS Domination v1.9 UNIVERSAL Hyperdroid v6
Noed's DarkBlueGray Theme V2.1
sreg's Theme V6.240
Mobs Blue Double Ginger Hyperdroid
Mobs Green Hyperdroid VR Theme
rixsta's Black Chrome
Click to expand...
Click to collapse
Download Link for RedPillKernel
RedPillKernel Rev1.3(Changelog, FAQ, Download)
Release thread
Click to expand...
Click to collapse
Other usefull links and stuff
Pdroid patches by Veyka
Petsasj's TouchWiz Launcher mods
Applications safe to remove thread
Debloater scripts
Click to expand...
Click to collapse
Learn how to file a complete bug report in Android

Hyperdroid user question in this thread!!!
We need to encourage all users of Hyperdroid, who are NOT contributing debugging information to the development or testing team to use this thread to discuss their issues and experiences (positive, negative, or otherwise), and most importantly, post their functional questions here.
Posting to the development thread questions that are not development related or that relate to development related enhancements is placing an unnecessary burden on the Team.
Let's try to support each other and keep the bandwidth low on the development thread. Let's help the development and testing Team by keeping user related discussions alive and vital here...

[UPDATE] Hyperdroid FAQ
Hi Hyperdroid fan user,
We are compiling Q&A post on the Rom in this thread. Its purpose is to trace the Q&A that for now are recurrent in the dev's thread and hopefully later, in this one ?
For those experiencing problems with sound or silent alarm or "no beep beep" when calling with 6.0.8 , DOC have published a fix, here's the post :http://forum.xda-developers.com/show...&postcount=463
Fix is included in later versions
Questions often asked on the thread
Q: Why is base rom always full wipe?
A:Only when base is full wipe, it is (almost) sure, that users do not complain about issues, which are introduced by themselves. If you are an experienced user, you are able to change the updater-script on your own risk. But then you can propably handle it. This user effort of full wipe is little compared to the questions, which dev's are faced with a no-wipe.
Q : Is the ROM "RTL friendly" ? does it support RTL ?
A : Yes the ROM does support RTL. You can activate the RTL patch within the Hyperdroid Part application. Open Hyperdroid parts, go to Androidmeda tweaks > Personalization > Right to Left Patch confirm you want to apply the patch and voilà !
Q : What's the difference between Redpill v5 and v6 ?
A : To make it short : V5 base is XXKL1 and includes JKay, V6 base is XIKL2 and doesn't include JKAY mod. Detailed change log between V5 and V6 can be found here : http://forum.xda-developers.com/showpost.php?p=21767096&postcount=2
Q : Why v6 doesn't includes JKAY ?
A : Because JKay only develop with version he got (mostly XW and XX), if a XI version appears, then it may be integrated later ... or not
Q : Does vert's ics theme work?
A : Latest version is now hyperdroid compatible. Thank the man for taking time to do it.
Q : Where can I find Themes
A : DOC's Surgeon and themes can be found here : http://forum.xda-developers.com/showpost.php?p=21778696&postcount=96
Other themes / surgeons will become available via the OTA tool, please be patient as it take some time for the Devs to upload all that to the servers
Q : After I installed xxx's surgeon, apps won't install on market, it says app incompatible with device
A : If you or the surgeon (most do it) have changed your DPI you will have to set it back to 240 or 160, clear market cache, and reboot. You can do it all from HyperDroidParts
After reboot, restart market, install your applications, change DPI back to what you like, reboot again and voilà. Blame the sloppy application's developer for not supporting multi dpi
Note : in some cases, it seems that the reboot is not enough. If it happens for you, try restarting the phone instead
Q:I've a bug with the rom, should I post to the dev's thread ?
A :If you want the dev's to be able to help you, give them a logcat from just after/before the issue happen.
if you're not easy with how to get one, there are a few apps on the market you can download which will do the trick.
Post it in the dev thread along with the complete description of your issue and detailed steps you made to get the issue.
As a general remark, and because sadly things have to be repeated continuously :
Before posting, you should try to reproduce it with only the base installed.
if you can't, then it is an app or theme issue don't post it in the dev's thread. Ask here for help of other users if they can, they will.
if you can, then post all the info in the dev's thread
BTW, don't bother to post in the dev's thread if:
you use another kernel
you haven't tried to reproduce it on a full wiped base
A usefull link with details on how to fill bug reports from pongster itself : How to submit Useful Bug Reports
Q :I want to have my apps flashed with the rom as described in the changelog, how can I do this ?
A :Note that this is an advanced feature. if you modify the rom this way and get any problem, flash a base first before posting any "bug" Here is a short how to :
1- extract the archive on your HD say into a new directory called "hyperdroid". Just under that directory, you will see a folder named [data]
2- add a new subdirectory to data called 'app'
3- put in it the application you want to be installed as user applications. Be carrefull though, user app apk got renamed when put in this directory, i.e. Titanium apk has to be called "com.keramidas.TitaniumBackupPro-1.apk"
4- rebuild your archive
5- copy on your phone and flash through recovery
if you got all the files needed by your application, then you should see it installed in the app drawner and working.
Advice
You must check if your favorite application is using dependancies (library or anything else). Put these library under [System/Lib] (if the lib subdirectory does not exist create it)
You can do the same for system applications (launchers or paid app keys need that sometime).
... This post will be updated with recurrent question asked here and on the dev's thread
... PM me or noke955 if you think of any useful addition in order to not pollute the thread

missing feature in v5 & v6
Hi,
I have try to add my apps into /data/app inside the zip before flashing it but unfortunately I didn't found a folder named "app" in /data in both zip files (HyperDroid_Androidmeda_v6.0.0_signed.zip or Hyperdroid_Androidmeda_v5_XWKL1_signed.zip).
Is it the wrong way to do this?

Hi,
Can you add the sure fire way to use non fully compatible market dpi to work properly in first topic! I know 160dpi is too small for some, i found 192 to be perfect and i saw someone mention it but i forgot the procedure, it was like clear market, set it to 160, accept market, change to whatever dpi, then change something (forgot) then use market...
Anyone know what I mean, im sure this would help a lot of people as a first post guide
#Randomfact using Rixsta's ics keyboard mod(theme in Verts thread) works perfectly with petsasj's modded keyboard found in his and doc's surgeon
Sent from my GT-I9100 using Tapatalk

lesid007 said:
Hi,
I have try to add my apps into /data/app inside the zip before flashing it but unfortunately I didn't found a folder named "app" in /data in both zip files (HyperDroid_Androidmeda_v6.0.0_signed.zip or Hyperdroid_Androidmeda_v5_XWKL1_signed.zip).
Is it the wrong way to do this?
Click to expand...
Click to collapse
short answer : yes you're doing it the wrong way
long version :
Although you can do it, if you modify the ROM, nobody won't be able to reproduce any issue that you might have created by adding your apps. Instead, you better goes the surgeon way.
Create a surgeon that will install your apps (you can even add the data related to them if you want). You will then flash the surgeon after you flash the ROM.
For more information on surgeon read this !
---------- Post added at 05:44 PM ---------- Previous post was at 05:42 PM ----------
dkimmortal said:
Hi,
Can you add the sure fire way to use non fully compatible market dpi to work properly in first topic!
Click to expand...
Click to collapse
Yeah, I'll update the Q&A section with that one.
Thank you

For those who want to wake the S2 with the Homebutton, just edit the sec_key.kl at system/user/keylayout
It worked for me.

willybrand said:
For those who want to wake the S2 with the Homebutton, just edit the sec_key.kl at system/user/keylayout
It worked for me.
Click to expand...
Click to collapse
For all of you who do not want to get dirty hands, thankfully, HDP does it for you :
Go to settings > hyperdroidparts > androidmeda tweaks > wake options and chose one of the provided option
Thanks the Dev's team for this amazing piece of work, thanks especially petsasj for the HyperDroidPart : Advanced tweaks made easy

missing feature in v5 & v6
I would like to install titanium backup by using the new feature discribe in v5 & v6
I'm refer to what D.O.C put in thread #2 of "[ROM]-HyperDroid Androidmeda v5 & v6 RedPill Kernel inside-(24/01/2012)":
Release Date 24/01/2012
Hyperdroid Androidmeda v6
Contains RedPill Kernel Series v1.0
Updated HyperDroid Parts
Based on XILA2 Firmware from Samsung
Increased volume steps to 15 all sliders except for ring tones and notifications.
SD card not mounting errors should now be fixed, kernel incorporates some of the init.d tweaks that might have been the cause of the problem.
updated time zones to version n
Fujutweaks 4.0
Tweaked sqlite libs
Tweaked SQlite3
Csc is just a place holder
ROM supports hdpi and mdpi (except twlauncher, look here thanks to petsasj)
Deodexed
Zipaligned
AND rezipaligned on every boot for system/app, data/app, framework/app (Just to be sure for all your other apps)
Pre-Rooted for your convenience
here -> /data/app folder inside zip for auto installing preferred apks on boot (Simply copy apk's there and it installs... easy peasy)
Enable of BLN for stock Samsung SMS application (montymintypie/no.one.writeme)
appwidgetpicker for widget display ala cm7 (boombuler)
Hosts blocked except for some medical apps
resolv.conf added for faster gps lock
apn list from cm7
SIP over 3G
smooth spinners
Blur set to slow to avoid corruption of CRT effect (props to doctorcete)
Battery with 204 pngs for smooth animations supported
Lidroid 15 toggles(tweaked, removed "lidroid Rom branding")
Advanced Power Menu with removed phone title options.
Build prop with some modifications with several tweaks for optimisations.
Init.d scripts for ram and speed optimisations, some taken from (some init.d tweaks Modded taken from nexxx85)
BLN support (neldar and creams)
Removed vibrate icon (OP)
Build.prop tweaks (OP)
Stock themed
Market 3.4.4
Calendar now supports mdpi
Incall dialer now supports mdpi
Music supports mdpi
FM application supports mdpi
At boot removed welcome screen due to incompatibility with newest google maps.

OK, I've had a look at the ROM files. heres a short how to :
1- extract the archive on your HD say into a new directory called "hyperdroid". Just under that directory, you will see a folder named [data]
2- add a new subdirectory to data called 'app'
3- put in it the application you want to be installed as user applications. Be carrefull though, user app apk got renamed when put in this directory, i.e. Titanium apk has to be called "com.keramidas.TitaniumBackupPro-1.apk"
4- rebuild your archive
5- copy on your phone and flash through recovery
if you got all the files needed by your application, then you should see it installed in the app drawner and working.
Advice
You must check if your favorite application is using dependancies (library or anything else). Titanium needs a file called libtitanium.so
Put these library under [System/Lib] (if the lib subdirectory does not exist create it)
You can do the same for system applications (launchers or paid app keys need that sometime).

malhor said:
For all of you who do not want to get dirty hands, thankfully, HDP does it for you :
Go to settings > hyperdroidparts > androidmeda tweaks > wake options and chose one of the provided option
Thanks the Dev's team for this amazing piece of work, thanks especially petsasj for the HyperDroidPart : Advanced tweaks made easy
Click to expand...
Click to collapse
It never worked in my case
Power Key only works, with Power Key and Home i have to push the two Buttons together and this is quiet sensless to me!

Thank's for the great job, i will give feedback when i'll make the install! for now i'm testing the yakkasrom hopping the battery life will be better with the hyperdroid V6..! again big thank's!

After installing v6 and DOCs Surgeon i reverted back to v5, but the DOC Bootscreen (a static one) is still there for a couple of seconds after that the androidmeda.gif is shown.
How can i remove this image?!
EDIT: It´s the image which is stored in the boologo folder in the surgeon. but how can i remove this image?

Dominic83 said:
After installing v6 and DOCs Surgeon i reverted back to v5, but the DOC Bootscreen (a static one) is still there for a couple of seconds after that the androidmeda.gif is shown.
How can i remove this image?!
EDIT: It´s the image which is stored in the boologo folder in the surgeon. but how can i remove this image?
Click to expand...
Click to collapse
Change the image with the one you want (find the stock one if that's what you want) place it in the bootlogo folder and flash again and it'll change.

AvRS said:
Change the image with the one you want (find the stock one if that's what you want) place it in the bootlogo folder and flash again and it'll change.
Click to expand...
Click to collapse
Thanks for your answer.
But now i am back on version5 so i cannot flash surgeon v6.
In the normal Hyperdroid v5.zip there is no such folder, where i can place another image.
BTW: I like the Androidmeda Image.

Dominic83 said:
Thanks for your answer.
But now i am back on version5 so i cannot flash surgeon v6.
In the normal Hyperdroid v5.zip there is no such folder, where i can place another image.
BTW: I like the Androidmeda Image.
Click to expand...
Click to collapse
I'm not at home so can't look at the zips but I'm pretty sure the standard VRTheme template has the bootlogo folder in the root of the zip so I'm sure you can add a bootlogo folder and then put the image you like in there. If you don't want to try it I'll have a look when I get home tonight. You can look where that folder is in the surgeon and use exactly the same path as that as a surgeon is just a mini ROM so to speak.

Thanks,
in docs surgeon there is a folder called "bootlogo" at the root of the zip. There is a jpg and another file.
I take a jpg (the last one 126) from the standartbootanimation and vertumus ics theme. There i create a bootlogo folder at the root and put in the jpg and the other file from doc and flash it.
But the bootlogo is still there.
It would be great, if you can make zip for me (no hurry, take the time you need)

1.whats the difference between wiping data, cache, dalvik cache and wiping data, cache, dalvik cache + format system, data, cache. When should i use the second method and when the first?
2. when to use samsung ultimate cleaning script, whats the difference if i just wipe cache, dalvik cache and flash new kernel without cleaning script?

mp1806 said:
1.whats the difference between wiping data, cache, dalvik cache and wiping data, cache, dalvik cache + format system, data, cache. When should i use the second method and when the first?
2. when to use samsung ultimate cleaning script, whats the difference if i just wipe cache, dalvik cache and flash new kernel without cleaning script?
Click to expand...
Click to collapse
Hi,
2- Never used the ultimate cleaning script so can't tell if there is a diff.
1- Wiping deletes the content of the said directory IIRC where Format will erase the whole partition. If you format your system, you won't be able to boot until you flash a new rom.
So if you want to clean, wiping is enough.
PS. I've just looked the code for the script. in addition to wiping cache and so, it also clean the /system/ect/init_d directory. BTW, in this script, format and wiping call the same command : delete_recursive, so it is basically the same operation done twice

i was reading some where and they say that XILA2 (v6) (using doc script) should have a new lockscreen......
i dont even have a lock screen on v6 only pass-code pattern
only me ?

[ROM Release] Kiss4Droid (Based on B572G)

This is the 1st ROM I developed/cooked
It is based on official B572G Release so it's Gingerbread 2.3.5
The ROM follows a K.I.S.S philosophy trying to have almost no extra apps installed so you can build your system around your needs
Let's see what changed:
Changes:
1) Changed Default Launcher to Zeam
2) Removed a lot of apps from Huawei and left only the essential ones(install everything else you need from PlayStore or by installing apk files from other roms)
3) Changed Default CPU Governor to SmartAssV2
4) updated hosts file(no more ads) and gps.conf (for europe usage)
5) Added Volume Rocker Wake
6) Unlocked FPS & Root Permissions(of course )
7) Removed some audio files from the media folder to save space
8) Added init.d & build.prop tweaks(some of them may not work,but they don't have any side effect in the system so I left them there on purpose)
9) Changed Camera & Settings Icon to look like ICS (thanks to Pikachukaki for his great guide in replacing .png files in apk files)
10) Patched libsqlite.so
11) HDR function enabled on camera(well this actually is included in number 8 cuz it's a build.prop tweak )
12) Fast Boot Option is removed (again a build.prop tweak)
I have also made some little tricks here and there in the cust.img so make sure before flashing the ROM that you have a working backup and/or a backup of the cust.img
I edited the cust.img and removed all extra apps and module files there,and also changed the default language to english because without this the ROM would boot the 1st time in chinese
If you don't want to flash my cust.img that is in the .zip file simpy delete it from there
If you flashed and you want your old cust.img back simply boot into pink screen and replace it with you cust.img backup
There is no side effect from the cust.img change except that you will lose swype,huawei ime(I prefer the basic android keyboard anyways) and also the Totem Weather Widget
Installation:
Do the following in any order
-------------------------------------------------
Wipe data/factory reset
Advanced->Wipe Dalvik Cache
Mounts & Storage-> Format system
--------------------------------------------------
Now flash the .zip file
Reboot
Enjoy!
Everything is working in this ROM (because it's based on official B572) except TV-OUT of course
Anyway.Tell me what you think of my 1st work on android.
Happy Flashing
Download:
http://www.mediafire.com/?roqglp5mbh3621m

Nice ROM. Keep It Up. Post Some Screenshots If You Can.

Thanks.
Screenshoots added!
Note that the screenshoot app and es file explorer that you see in the 2nd image aren't present when you first install the ROM.You have to install them from play store

That's great. thanks for share.

Nice work..you manage to edit the cust.img??nice!!!i was bored to install linux!!

Modding the cust.img wasn't hard actually.
Btw pikachukaki,again thanks a lot for helping with my first updater-script issues!

Moihack said:
Modding the cust.img wasn't hard actually.
Btw pikachukaki,again thanks a lot for helping with my first updater-script issues!
Click to expand...
Click to collapse
NP m8....i havent search it for long...so i didn't try to modified...also for GB it didnt have no point...the rom is broken from release one! anyway..one day remain for ICS...lets see!!

could you please tell me how i can have contact sync on this rom? whenever i click accounts on the contacts apk i get android.process.core force close. I have installed the latest gapps but still no sync. other than that great rom

Is it any better than cm7
Sent from my u8800-51 using xda premium

cm7 is the best rom on u8

:thumbup:
Sent from my u8800pro using CM 7.2 Shendu

Somcom3X said:
Is it any better than cm7
Sent from my u8800-51 using xda premium
Click to expand...
Click to collapse
hmmm. That is a personal opinion. I like cm7 more due to the power widget,screen on/off animation etc
But if someone wants an official huawei gingerbread ROM(official for U8800+, not a port from honor e.g kalo) then this should be a good choice.
kostismv said:
could you please tell me how i can have contact sync on this rom? whenever i click accounts on the contacts apk i get android.process.core force close. I have installed the latest gapps but still no sync. other than that great rom
Click to expand...
Click to collapse
get these: http://www.mediafire.com/?z6da8r2ox4kr7a7
don't flash the zip
unzip the files included and copy/paste them in your /system/app folder

Thanks
Sent from my U8800Pro using xda app-developers app

Moihack said:
hmmm. That is a personal opinion. I like cm7 more due to the power widget,screen on/off animation etc
But if someone wants an official huawei gingerbread ROM(official for U8800+, not a port from honor e.g kalo) then this should be a good choice.
get these: http://www.mediafire.com/?z6da8r2ox4kr7a7
don't flash the zip
unzip the files included and copy/paste them in your /system/app folder
Click to expand...
Click to collapse
This zip file is corupted...
I can't extracted it...

dingila said:
This zip file is corupted...
I can't extracted it...
Click to expand...
Click to collapse
extracts fine with no erros here on win7 x64 bit and 7zip 9.20 x64
maybe the file corrupted on download! try redownloading and extract

Moihack said:
extracts fine with no erros here on win7 x64 bit and 7zip 9.20 x64
maybe the file corrupted on download! try redownloading and extract
Click to expand...
Click to collapse
I tried 5-6 times already ...
Or the minimum is 10 times

dingila said:
I tried 5-6 times already ...
Or the minimum is 10 times
Click to expand...
Click to collapse
do you try to extract from phone or from pc? if yes with which program? try with 7zip just to make sure
p.s. downloaded the file twice and I got no errors really

Can you fix your Release? (CyanogenMod 7.2 (By Moihack)
And there are no such things:
1. GoogleContactsSyncAdapter
2. GoogleCalendarSyncAdapter
3. Gmail
To put it all in, as you should be?
And post it back here!
Please!
And if you can try to put this App inside if you can of course!!! Sound recorder from MIUI...looks like old tape
Thanks in advance!

dingila said:
Can you fix your Release? (CyanogenMod 7.2 (By Moihack)
And there are no such things:
1. GoogleContactsSyncAdapter
2. GoogleCalendarSyncAdapter
3. Gmail
To put it all in, as you should be?
And post it back here!
Please!
And if you can try to put this App inside if you can of course!!! Sound recorder from MIUI...looks like old tape
Thanks in advance!
Click to expand...
Click to collapse
Sorry my friend but no... School keeps me really busy this year and I don't have the patience to wait for the upload to end while changes are only these small things. However I can help you include them in a personal cm7.2 .zip of yours and flash it correctly If want a how to p.m.

dingila said:
This zip file is corupted...
I can't extracted it...
Click to expand...
Click to collapse
Rename the file to sync.zip include the .zip part
Sent from my u8800-51 using xda premium

[MOD] Mods for odexed Stock ROM / official JellyBean XXLSZ

Hi guys,
as promised some days ago, I will provide Mods now for odexed Stock ROM XXLSZ.
Why? Because lots of people don't want to flash deodexed (Custom) ROMs for different reasons (odexed feels snappier or still want to be able to update via OTA or too much risk or whatever...)
Usually all Mods (like 4-Way-Reboot, Ink Effect, unlimited Apps for Multiwindiw, etc.) are ONLY made for deodexed ROMs - so you guys on odexed never benefit of these great customizations.
Now this will change and I will provide some of these Mods - as my time is limited, I will do this step by step.
Prerequisites:
- you have to be on odexed Stock ROM XXLSZ (e.g. flashed via KIES, ODIN or Mobile ODIN)
- you have to be rooted
- you have a working CWM Recovery installed
Installation Instructions:
- download flashable zip and copy on your SD-Card
- boot in CWM Recovery
- select and press 'Install Zip'
- select and press 'Choose zip from sdcard'
- select and press the flashable zip (e.g. '4WayReboot_odexed_XXLSZ.zip)
- select 'YES - Install 'nameof.zip'
- Mod will be flashed
- go back to main menu
- select and press 'Reboot System Now'
- you are done - so enjoy now
1. MOD --> 4-Way-Reboot
Download-Link: http://www.mediafire.com/?07j9q779ksiwxsx
How to use:
- press Power Button
- select 'Restart'
- now you will see these 4 options you can choose:
2. MOD --> Ink-Effect with any color (includes 4-way-Reboot also)
Download-Link: http://www.mediafire.com/?68d3vc8t5i8saf0
How to use:
- open App Drawer
- open App 'Ink Color Changer'
- check both options 'Ripple Effect' and 'Ink effect'
- open 'InkEffect color
- set color you like
- enjoy
Credits go to mythtrandyr for his App 'Ink Color Changer' to do all the settings inside with every colour in the world
3. MOD --> Center Clock in Status Bar (notifications NOT overlapping!)
Download-Link: http://www.mediafire.com/?gxqohtkc7husvy4
Download-Link (Undo this Mod): http://www.mediafire.com/?h5iaavabca7z37c
How it looks like:
Credits go to raubkatze for his HowTo

eybee1970 said:
... or still want to be able to update via OTA ...
- you have to be rooted
- you have a working CWM Recovery installed
Click to expand...
Click to collapse
Don't you normally loose the feature of OTA updates when rooting with another Kernel (with CWM)?

ThaiDai said:
Don't you normally loose the feature of OTA updates when rooting with another Kernel (with CWM)?
Click to expand...
Click to collapse
I am not sure tbh...but you can have root with stock kernel and also CWM recovery running....the way Philz provided

eybee1970 said:
I am not sure tbh...but you can have root with stock kernel and also CWM recovery running....the way Philz provided
Click to expand...
Click to collapse
- When I used MO when installing XXLSA I injected Root/CWM but was able to make the update to XXLSC with OTA.
- But when I install a Philz Kernel and activate the Software Updates I get the info that the kernel was changed (blablabla) and OTA isn't possible anymore.
So I guess that using the Mods by rooting the feature OTA shouldn't be important for a user.

I don't see why someone should bother if he have already done something like this - you simply download from Sammobile and you are GTG.
And yes - if you flash Philz you cannot do OTA.
eybee1970 - AWESOME!

Great support for odexed ROM.
Thanks alot eybee..
Sent from my GT-N7000 using Tapatalk 2

Hy eybee, is it possible to know the procedure,? I have been trying to do this myself but always end in boot loop? How did you Odex the file back? In the phone or pc?

updated OP with Ink-effect

does it still say after flashing the zip "android upgrading" after every restart?

nokiamodeln91 said:
Hy eybee, is it possible to know the procedure,? I have been trying to do this myself but always end in boot loop? How did you Odex the file back? In the phone or pc?
Click to expand...
Click to collapse
I used this tool http://forum.xda-developers.com/showpost.php?p=29392686&postcount=1

treacherous_hawk said:
does it still say after flashing the zip "android upgrading" after every restart?
Click to expand...
Click to collapse
no

I am using that tool too.
---------- Post added at 09:07 PM ---------- Previous post was at 09:05 PM ----------
treacherous_hawk said:
does it still say after flashing the zip "android upgrading" after every restart?
Click to expand...
Click to collapse
It won't cuz these are odexed

nokiamodeln91 said:
I am using that tool too.
Click to expand...
Click to collapse
you have to be VERY careful in odexing back! It does NOT work when you take a given jar with all mods included and trying to odex back --> ends up in bootloop as you know (though you will no see any errors in odex back process!). So you have to start modding from scratch...

Got it... Flashed it and works perfectly... Is there a way to go back to normal reboot options(no 4 way reboot)
Sent from my GT-N7000 using xda app-developers app

Yes. I am doing it from scratch by using the services.odex
. So while smaling back, I covert it to classes.dex?

nokiamodeln91 said:
Yes. I am doing it from scratch by using the services.odex
. So while smaling back, I covert it to classes.dex?
Click to expand...
Click to collapse
just use the tool --> 2. Decompile all Odex --> then do the smali editing --> then 4. Deodex all --> then rename to classes.dex in Folder 7. --> then take original jar, open with WinRAR (or 7zip) and copy classes.dex inside --> then move this jar to Folder 01 modded files --> put original jar and odex in Folder 02 original files --> do 5. Reodex All --> in Folder 03 odexed files you'll find the modded files ready to flash

treacherous_hawk said:
Got it... Flashed it and works perfectly... Is there a way to go back to normal reboot options(no 4 way reboot)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I will do some 'Undo_Mods' maybe tomorrow...too lazy today

eybee1970 said:
I will do some 'Undo_Mods' maybe tomorrow...too lazy today
Click to expand...
Click to collapse
Thank you..already clicked on thanks button

mods
HEY eyee are you gona made mods like airview and others for stock odex XXLSZ rom

amerpljakic said:
HEY eyee are you gona made mods like airview and others for stock odex XXLSZ rom
Click to expand...
Click to collapse
Airview is already build in second mod...not for gallery but the general one...just did not mention
EDIT: I will do some mods for apps also, but will do that with deodexed apps, as some apps make trouble to reodex (did not find proper solution til now...)
The script in flashable will contain commands then for deleting the associated .odex file - but there will always be a 'Undo Mod' so you can easily restore to stock, if you don't like