Hi everyone,
I have freaking weird problem, I just cant use my phone anymore now.
And totaly have no clue wtf is wrong with it..
Today I got the 29.5 artemis rom, and installed it on my phone, using SSPL method
I've done it before with artemis rom only older version. And everything was working fine.
Well it kinda did the same with this newer rom untill I went to "Microsoft my phone" and it froze, and nothing worked to shut it down, so had to take my battery out and in again, it restarted. After that it froze when I pressed the off button, and after I pressed it again it just froze and didnt want to do nothing..
So after that I did the same again I had to take my battery out, and then in again.
So now it just dont want to pass the second "HTC" screen with RGD numbers on it.
So I tried to install the rom from my PC via the bootloader, and it gives me update error after a while watching in htc screen with 0% update on it..
SOMEONE HELP!?
I ******* want to smash the phone in piecess..
what phone you got?is it a tmous?
Try a reset it normals resolves this type of iss - or a factory reset
Well, the issue it freezes at that second screen and normal reset aint working, tried hard reset several times still nothing. Freezes at the second screen.
And I use eropean version of the phone. Dunno what tmous is tho.
Gonna try to get HSPL on it, Task 29 format see if it will do somehting
------
Edit
------
I think I got it working now, its been formatted succesfully, and now its installing the rom on the phone, hope it wont freeze at the same point (keeping the finger crossed)
------
Edit #2
------
Its working now
forum.xda-developersxxxxxxcom/showthread.php?t=732380
Follow the guide and booted haret.exe. Didnt run CLRCAD.EXE as it was not in the folder.
It booted up fine tho it kinda stod still and I removed the batteri to try again (guide didnt say I couldn't =s and read somewhere that it may fail on first boot)
Now it needs power to start but only gets to chucky "loading please wait" and the 3 red lines then it reboots...
How ****ED I'm ?? (cant hardreset it)
Got it to hardreset but changes nothing... Guess I just give it to some homeless guy and never gonna buy a WM phone ever again...
Have you tried flashing a stock rom to it? If you can get it to hard reset you should be able to get into bootloader as well and then flash a stock or reflash your rom
Hi folks.
I've just tried to flash my HD2 to Gingerbread from WinMobile 6.5 using the following instructions:
http://forum.xda-developers.com/showthread.php?t=905060 (It's in HTC Leo: HD2HD2 AndroidHD2 Android NAND Development[3.May.11][MAG/cLK] NexusHD2-Gingerbread V2.7 [GRJ22/Android2.3.4][Kernel:tytung_r10])
The HSPL installation went fine, however, when used the ROMUpdateUtility.exe, I've been left with a phone that won't boot past the O2 Welcome screen?
Can someone please tell me what I'm doing/done wrong? I've now got a phone that's useless No amount of resetting, rebooting or hard resets will change it.
Cheers!
Further update
Where it tells me to boot the phone whilst holding the power key down, it doesn't appear to do anything. If I do a cold boot, the phone just will not boot (but then it didn't under Windows) and if I hold it down & do a soft reset, just still goes to the O2 Welcome screen. I can put it into the ROM update Utility again & attempt to reflash the ROM (which now shows no Version number) and I get the screen that tells me The ROM Update is complete, although it takes only about a minute, as opposed to the 10 it should take!
FYI, the Phone ROM Update Utility is version 3.27.4.3, if this helps?
Ta!
UPDATE: MODS REMOVE THIS THREAD, FIGURED IT OUT WITH SOME MORE DIGGING, THANKS!
Ok, I have the TMO Leo, currently running Tyween's TyphooN cm7 port. I need to reset the phone and going to privacy->reset phone does nothing for me.
I tried doing a clean install of the entire rom, but I'm running into issues everywhere with magldr or the phone in general.
First off, I've downloaded both WMDC 6.1 and HTC Sync (Although htc sync doesn't load after many attempts to repair, and uninstall/installs I get the error : The Program can't start because the tlib_log.dlll is missing from your computer. Try reinstalling... Blah)
But the computer recognizes the phone's driver now.
I tried running Task29 to no avil, and then figure I'd skip that set, tried to reinstall magldr (being that booting with power down ONLY boots into the boot loader (also tried reinstalling CWM from the app on the phone, also to no avil)). The computer shows that madldr was installed successfully but, it won't launch into it. Yet I know magldr should already be there, since it's needed to load the current ROM, which works great (minus the the unable to reset thing...)
My other thought was trying to restore the phone to WM and just go from there, but being that WMDC won't recognize the phone, I can't really do that as far as I know.
Any help would be greatly appreciated! ASAP too
Side note: Need to do the whole reset because friend is currently in need of a phone, and I'd rather not give him my main phone (mytouch4g) because I'm a bit partial to it lol, don't hate on me for that please
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone