I have flashed my Note with the UK ROM LP4 and want to change my CSC code from the German CSC code ODT which I set after installing the German LPY ROM. But when I try using *#272*IME# then it just shows the ODT code with no other codes listed and no selection button for the ODT code.
Is there any way to fix this?
Thanks for all your help
I think the U.K. Rom you installed dude doesn't offer Multi CSC resource. You have to install a rom with Multi CSC resources.
Check Samfirmware and look for another U.K Rom you can flash and check later on if you can have the option of selecting ODT among the CSCs on that ROM.
letters_to_cleo said:
I think the U.K. Rom you installed dude doesn't offer Multi CSC resource. You have to install a rom with Multi CSC resources.
Check Samfirmware and look for another U.K Rom you can flash and check later on if you can have the option of selecting ODT among the CSCs on that ROM.
Click to expand...
Click to collapse
There is only one other UK rom on Samfirmware which is for the carphone warehouse but how do you know if it is Multi CSC? I don't want to select ODT but the UK CSC which I think is XEU
Thanks for your help.
hmm.. hey listen.. i read this before, try this step: downgrade your phone to a all stock GB , there are a lot of it in Dr ketan's thread http://forum.xda-developers.com/showthread.php?t=1424997. Choose the very basic stock one. After you flash to stock, check if there is ODT on that, if it does have it. Then your good to go. Flash and back to your official U.K Rom, I'm sure the Mutli CSC from the previous one is already there. By the way, you need to flash the Rom only.. not the corresponding CSC files of your new UK ROM..
letters_to_cleo said:
hmm.. hey listen.. i read this before, try this step: downgrade your phone to a all stock GB , there are a lot of it in Dr ketan's thread http://forum.xda-developers.com/showthread.php?t=1424997. Choose the very basic stock one. After you flash to stock, check if there is ODT on that, if it does have it. Then your good to go. Flash and back to your official U.K Rom, I'm sure the Mutli CSC from the previous one is already there. By the way, you need to flash the Rom only.. not the corresponding CSC files of your new UK ROM..
Click to expand...
Click to collapse
Thanks for your help I'm going to flash XXLC1 which is 2.36 and is called Open Europe so it should have the UK CSC code which I think is XEU. So I need to set that once LC1 is flashed then flash LP4 again. Correct? I notice in Samfirmware there are PDA and CSC files available. Can you just flash a CSC file? If so then there is no need to flash XXLC1 which is the PDA file.
When I flashed the UK LP4 rom I just flashed the PDA file. If I had also flashed the CSC file at the same time then perhaps I would be able to select the UK CSC code. As I have just flashed the PDA file can I now flash just the CSC file or do I need to start again and flash PDA and CSC together?
Sorry for all the questions, but I am a noob
I just checked it for myself and realised that only Korea CSC code is avaible to me after ICS Turkey version update. How can i revert to TUR CSC code which is for Turkey? I flash roms with mobile odin pro. Do you think it's something related to it ?
I managed to fix my CSC code problem by flashing the stock European GB rom XXKL8 which is multi-CSC. The other big advantage of the KL8 is that it does a full wipe which clears a lot of faults when you flash over other roms without a wipe.
With XXKL8 installed I was able to select the XUE CSC code for the UK and then flash the latest ICS stock rom for the UK. With the correct UK CSC code and correct UK rom I am now able to use kies or ota for future updates.
captainhakan said:
I just checked it for myself and realised that only Korea CSC code is avaible to me after ICS Turkey version update. How can i revert to TUR CSC code which is for Turkey? I flash roms with mobile odin pro. Do you think it's something related to it ?
Click to expand...
Click to collapse
It's nothing to do with Odin. You need to find a rom, probably a regional one which contains multiple CSC codes including your Turkey code. You might need to flash a GB rom first which does a full wipe if you have been flashing several non-wipe roms to clear any errors.
Once you are able to set the Turkey CSC using the regional Multi-CSC rom then you can flash the ICS rom for Turkey then you will have the correct CSC code and correct rom so you will be able to use kies for updates.
Hope this helps.
To be honest i don't remember which Gingerbread CSC code i was using before the ICS update and moreover i didn't directly flash ICS Turkey version over gingerbread. I first flashed ICS LPY German then i flashed ICS Turkey on it. Before that i only used German , Open Europe and Turkey roms. So i don't have a clue where did that Korean CSC come from even tho i never flashed a rom with Korean CSC. Thanks for the tip but i'm scared to downgrade to gingerbread for the famous emc bug hard brick problems. I can bare with korean csc for now as i never flash roms through kies.
captainhakan said:
To be honest i don't remember which Gingerbread CSC code i was using before the ICS update and moreover i didn't directly flash ICS Turkey version over gingerbread. I first flashed ICS LPY German then i flashed ICS Turkey on it. Before that i only used German , Open Europe and Turkey roms. So i don't have a clue where did that Korean CSC come from even tho i never flashed a rom with Korean CSC. Thanks for the tip but i'm scared to downgrade to gingerbread for the famous emc bug hard brick problems. I can bare with korean csc for now as i never flash roms through kies.
Click to expand...
Click to collapse
Flashing ROMS is never risk free. However flashing stock GB ROMS correctly using Odin appears to be reasonably safe. You can do a search for the correct CSC code for Turkey and change that but it will do a factory reset. If you don't have the CSC code which matches your ROM then you will not be able to update firmware using Kies.
Doesn't manual factory reset on a single-CSC ROM also change the CSC to that of the ROM...?
Related
Hello. I live in Turkey and still no update for us.
So i suppose i can change CSC and get official update from kies.
How can i change CSC to UK ?
After i changed i suppose i will get official uk updates. But would this cause any problem since i live in turkey and uses different service providers
thank you
my phone is currently stock firm 4.0.4 and not rooted
MonsterMMORPG said:
Hello. I live in Turkey and still no update for us.
So i suppose i can change CSC and get official update from kies.
How can i change CSC to UK ?
After i changed i suppose i will get official uk updates. But would this cause any problem since i live in turkey and uses different service providers
thank you
my phone is currently stock firm 4.0.4 and not rooted
Click to expand...
Click to collapse
You will need the full UK ROM from Sammobiles or checkfus.
This may give you the Korean CSC, if it does you will need to download the CSC changer for SGS/2/3 from the market and select BTU, this will wipe your data though.
delsus said:
You will need the full UK ROM from Sammobiles or checkfus.
This may give you the Korean CSC, if it does you will need to download the CSC changer for SGS/2/3 from the market and select BTU, this will wipe your data though.
Click to expand...
Click to collapse
csc changer from market displays on this
sales code : ATO
and no other thing
MonsterMMORPG said:
csc changer from market displays on this
sales code : ATO
and no other thing
Click to expand...
Click to collapse
The Turkish ROM contains the CSC for Turkey only I believe, you need to flash the latest ICS from Sammobiles or checkfus and flash through Odin, then change the CSC.
Btw the English ROM is BTU
and another Btw, we haven't got JB for unbranded devices in UK yet, only O2 and Three carrier branded.
when i type *#1234#
i get these
AP : I9300XXBLH1
CP : I9300XXLH1
CSC : I9300ATOBLH1
so which country is my phone right now ?
I don't know the sales code but if you Google Samsung sales code ATO you will be able to find out.
But because you bought it front Turkey there's a 99% chance ATO is Turkey. If you want the English firmware you needs BTU then change the CSC to BTU (English firmware has a few CSCs included)
Sent from my GT-I9300 using xda premium
CSC is not an upgrade path .
Unless you have the full correct HIDSWVER codes phone will not update .
Solution download stock firmware and flash via \ODIN .
http://forum.xda-developers.com/showthread.php?t=1646610
or use CHECKFUS to download any firmware and flash via ODIN .
jje
JJEgan said:
CSC is not an upgrade path .
Unless you have the full correct HIDSWVER codes phone will not update .
Solution download stock firmware and flash via \ODIN .
http://forum.xda-developers.com/showthread.php?t=1646610
or use CHECKFUS to download any firmware and flash via ODIN .
jje
Click to expand...
Click to collapse
thanks flashing right now lets see
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
matale0 said:
Hi, I want to flash my galaxy as fedup with waiting for updates.
I got BTU, UK unbranded, unlocked S4
I am polish, so thinking flash it to polish firmware as they get it fast.
GT-I9505 XEO I9505XXUBMEA thats the one I want go for
Can someone tell what is it ? is it network firmware or unbranded?
I would go for it only if I can change CSC code to XEO, so I can get OTA updates.
If not I will keep waiting for BTU
And Dont really want XEO polish carier firmware, as I can flash to Three UK BTU network, would be the same and dont have to change CSC.
So, main questions are
What it is XEO ? what network ?
Can I flash it + change code to CSC all safe?
and how to do it ? Odin
Thank You.
Kris
Click to expand...
Click to collapse
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
madman_cro said:
as far as i tried you cant change csc with flashing . unless you flash single csc not multi.
only way is to root with auto root than change csc wit csc changer and then flash desired firmware with odin.
xeo looks like it is simfree so its just general for poland
Click to expand...
Click to collapse
can i get singles files for odin? CSC XEO ?
thx
matale0 said:
can i get singles files for odin? CSC XEO ?
thx
Click to expand...
Click to collapse
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
madman_cro said:
i didnt find any searching on net so i guess no. they usualy pack 20+- csc together
there was some talk of chcnging csc with flashing twice with odin without auto reboot. but that didnt work for me.
Click to expand...
Click to collapse
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
matale0 said:
i try that http://www.hotfile.com/dl/229983758/7d4d060/I9505XXUBMEA_I9505OXXBMF1_XEO.zip.html
Click to expand...
Click to collapse
try it. remember if you want to change csc with single flash(wich i dont think so ,that worked on s2) after first boot reboot to recovery and wipe data/chache. in recovery you will see wich csc applied.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Can someone help me out as I am new to all of this...
I am using a Samsung galaxy tab 7.0 (p2610), and I flashed a jelly bean update successfully using odin. I am not rooted.
I have a system update in the notifications window that is stuck there, that is not working (process fails), this is due to the csc code being in great britain.
I am in Canada, I have Odin ready to go, can someone please show me how to change the CSC of my device to Canada?
Where do I go to download the appropriate file? After I assume I load it up in Odin with device in recovery mode, and flash using the "CSC" option in Odin correct?
Any help would be great.
Hello!
I have read many foryms on how to etc etc and my problem is as follows. I bought a Samsung Galaxy S5 from an online store and later it upgraded from 4.2.2 to 4.4.2. Appears to be genuine but it is the SM-G900H with the octa-core Exynos. I bought it in Mexico. But the csc is TPA, meaning it is from Panama. I live in the EU so I searched for CSCs for my model in europe and decided to go with Russia's one. Got the .md5 file and started flashing normally with odin3. It always fails at 99% when it tries to flash the hidden.img (unfortunately have not any image atm). So I thought that it has to do with the CSC code. I tried every way possible that were suggested on many forums starting with rooting, but nothing worked for me, not the apps suggested, not secret codes, nothing. Cannot change the csc code from TPA to anything. Although, after I try to fail instal the SER (Russian csc code), I flash CWM recovery and upon connecting to Kies3, it recognizes the version of the PDA correctly, but the csc code is still TPA (Panama). Now I try to flash official samsung ROM again from Kies3 for a fresh start. I would like to know if there is any way of overwritting this CSC. Thank you in advance.
Sivaas Sil said:
Hello!
I have read many foryms on how to etc etc and my problem is as follows. I bought a Samsung Galaxy S5 from an online store and later it upgraded from 4.2.2 to 4.4.2. Appears to be genuine but it is the SM-G900H with the octa-core Exynos. I bought it in Mexico. But the csc is TPA, meaning it is from Panama. I live in the EU so I searched for CSCs for my model in europe and decided to go with Russia's one. Got the .md5 file and started flashing normally with odin3. It always fails at 99% when it tries to flash the hidden.img (unfortunately have not any image atm). So I thought that it has to do with the CSC code. I tried every way possible that were suggested on many forums starting with rooting, but nothing worked for me, not the apps suggested, not secret codes, nothing. Cannot change the csc code from TPA to anything. Although, after I try to fail instal the SER (Russian csc code), I flash CWM recovery and upon connecting to Kies3, it recognizes the version of the PDA correctly, but the csc code is still TPA (Panama). Now I try to flash official samsung ROM again from Kies3 for a fresh start. I would like to know if there is any way of overwritting this CSC. Thank you in advance.
Click to expand...
Click to collapse
Try to flash single countries csc instead of multi, flash again multi country csc if you want to change it to specify region.
Give one Thanks,Get one free?
jdomadia said:
Try to flash single countries csc instead of multi, flash again multi country csc if you want to change it to specify region.
Give one Thanks,Get one free?
Click to expand...
Click to collapse
If I understood correctly, you are saying that I should Flash again with TPA (Panama) firmware and then flash again with the SER (Russian) firmware?
I will try that tomorrow and will be back with the results.
Sivaas Sil said:
If I understood correctly, you are saying that I should Flash again with TPA (Panama) firmware and then flash again with the SER (Russian) firmware?
I will try that tomorrow and will be back with the results.
Click to expand...
Click to collapse
So I tried doing that, succesfully reverted to official PTA, but unfortunately with SER it always stucks on hidden.img and fails immediately.
Few months ago I flashed Android 5.0 Poland and today I wanted to flash original version which is Android 5.0 Romania. I did flash it and CSC changed from XEO which is for Poland as far as I know to SEE (unkown) instead of csc ROM which is for Romania.
My question is how I can get rid of SEE csc and get the ROM csc which is normal for my current firmware. I did tried factory reset quite few times.
Google ?
defragut said:
Few months ago I flashed Android 5.0 Poland and today I wanted to flash original version which is Android 5.0 Romania. I did flash it and CSC changed from XEO which is for Poland as far as I know to SEE (unkown) instead of csc ROM which is for Romania.
My question is how I can get rid of SEE csc and get the ROM csc which is normal for my current firmware. I did tried factory reset quite few times.
Click to expand...
Click to collapse
you must root and change csc using this app
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
at.great said:
you must root and change csc using this app
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
Click to expand...
Click to collapse
The thing is that I don't want to have knox 0x1 after Rooting the phone. The reason I did installed Romanian Version it's because I want to go with at Warranty to fix something.
defragut said:
The thing is that I don't want to have knox 0x1 after Rooting the phone. The reason I did installed Romanian Version it's because I want to go with at Warranty to fix something.
Click to expand...
Click to collapse
this maybe help you flash CSC in odn csc tab:
extract cache.img and hidden.img from your Romania firmware make tar from them using this program(https://www.dropbox.com/s/egp2c88amceg8mn/IZArc.4.1.9.rar?dl=0)
change the tar name to CSC.tar and flash in odin CSC tab.
do it with your on risk
My phone is Galaxy A5(SM-500F)
PDA/Baseband:A500FXXU1AOC1
Region/CSC: KSA
android version :4.4.4
*can i flash leatest (5.0.2)firmware with other csc for this model??
and How to flash this?
You shouldnt have a problem, i received my phone with NEE CSC (nordic countries) and flashed the Cyprus one as it had newer build date.
Ps, when flashing with odin, and changing region, tick the Update Bootloader option.
Also, Branded or Carrier Roms (Vodafone, Tmo, etc) wont flash on Unbranded phones as they have different partition tables.
Remember to flash only roms for your variant strictly (SM-A500F)
Edit: Latest rom is Here, instructions how to flash are on the download page of the rom you choose.
PlutoDelic said:
You shouldnt have a problem, i received my phone with NEE CSC (nordic countries) and flashed the Cyprus one as it had newer build date.
Ps, when flashing with odin, and changing region, tick the Update Bootloader option.
Also, Branded or Carrier Roms (Vodafone, Tmo, etc) wont flash on Unbranded phones as they have different partition tables.
Remember to flash only roms for your variant strictly (SM-A500F)
Edit: Latest rom is Here, instructions how to flash are on the download page of the rom you choose.
Click to expand...
Click to collapse
Does flashing original samsung firmwares trigger knox counter? Like if i have a stock phone with KK 4.4 and flash the LL 5.0.2
will the knox counter get triggered ?
No worries, it wont. Odin is a samsung leaked tool, and the roms are samsung made packages, it is pretty much what Kies/Smart Switch do when they handle the phones.
PlutoDelic said:
No worries, it wont. Odin is a samsung leaked tool, and the roms are samsung made packages, it is pretty much what Kies/Smart Switch do when they handle the phones.
Click to expand...
Click to collapse
Ī¤hanks a lot bro