So after I updated my samsung continuum to 2.2 and putting EC09 my vibration pattern changed. Instead of the two small vibrations it does one long vibration. I'd rather stay with the original pattern.. Is there a way to change it back to the original? Not through apps but through roots or zips?
XjokiX7 said:
So after I updated my samsung continuum to 2.2 and putting EC09 my vibration pattern changed. Instead of the two small vibrations it does one long vibration. I'd rather stay with the original pattern.. Is there a way to change it back to the original? Not through apps but through roots or zips?
Click to expand...
Click to collapse
Where did you find the rom for that?just curious
Sent from my SCH-I400 using Xparent ICS Blue Tapatalk 2
It is probably a bug in the rom.delete it n reflash it.
Sent from my SCH-I400 using Xparent ICS Blue Tapatalk 2
XjokiX7 said:
So after I updated my samsung continuum to 2.2 and putting EC09 my vibration pattern changed. Instead of the two small vibrations it does one long vibration. I'd rather stay with the original pattern.. Is there a way to change it back to the original? Not through apps but through roots or zips?
Click to expand...
Click to collapse
Which app is the vibration changed in? Messaging notifications, phone calls, another app, what? Is it across the board on all non call notifications? Which rom are you on? is it odexed or deodexed?
It changed on all the apps I download and all of the apps already installed *messaging and calling included* And I'm EC09 Deodexed. It randomly changed the vibration from the two small buzz to one long buzz.
XjokiX7 said:
It changed on all the apps I download and all of the apps already installed *messaging and calling included* And I'm EC09 Deodexed. It randomly changed the vibration from the two small buzz to one long buzz.
Click to expand...
Click to collapse
Hmmm. It could be changed back, if you were to hack something in (I believe) services.jar. Dont ask me to do , it, though. That's above my pay grade. To be honest, its been so long since I've been on eclair, that I dont remember what the vibration pattern was. Is there a particular reason you want the double vibration back, or is it just personal preference?
Sent from my SCH-I400 using Tapatalk 2
Hmm.. I've been hearing either framework or service jar but I'll check. And the double vibration I find it better. During work it does an extremely long vibration and it distracts everyone. When I had the double vibrate the vibration was soft and didn't distract anyone.
XjokiX7 said:
Hmm.. I've been hearing either framework or service jar but I'll check. And the double vibration I find it better. During work it does an extremely long vibration and it distracts everyone. When I had the double vibrate the vibration was soft and didn't distract anyone.
Click to expand...
Click to collapse
Why dont you just change the intensity?
Sent from my SCH-I400 using Tapatalk 2
It doesn't say I can change intensity. Or at least for vibration.
XjokiX7 said:
It doesn't say I can change intensity. Or at least for vibration.
Click to expand...
Click to collapse
Check Settings > Sound Settings. Scroll down, there should be an option for Vibration Intensity. I think it was added in when we got 2.2
DJMaj07 said:
Check Settings > Call Settings. Scroll down, there should be an option for Vibration Intensity. I think it was added in when we got 2.2
Click to expand...
Click to collapse
Nope. Nothing.
XjokiX7 said:
Nope. Nothing.
Click to expand...
Click to collapse
Hmm. Where did you get your EC09 Deodexed ROM from? I'd reflash one from our Dev section... you should have the intensity option in your settings.
EDIT: Shoot. I meant Sound Settings! Not Call Settings.
DJMaj07 said:
Hmm. Where did you get your EC09 Deodexed ROM from? I'd reflash one from our Dev section... you should have the intensity option in your settings.
EDIT: Shoot. I meant Sound Settings! Not Call Settings.
Click to expand...
Click to collapse
Hmm.. there's a vibration intensity in the sound settings. but it's for haptic feedback. so only for softkeys and certain UI interactions.. Nothing about mms or phone calls. Vibration stays the same.
XjokiX7 said:
Hmm.. there's a vibration intensity in the sound settings. but it's for haptic feedback. so only for softkeys and certain UI interactions.. Nothing about mms or phone calls. Vibration stays the same.
Click to expand...
Click to collapse
Oh it's only for the haptic. Well that sucks. I guess there isn't an option.
DJMaj07 said:
Oh it's only for the haptic. Well that sucks. I guess there isn't an option.
Click to expand...
Click to collapse
Oh well. Thanks for trying.
Intense vibration FTW!
Sent from my ADR6425LVW using Tapatalk 2
abby_nitewolf said:
Intense vibration FTW!
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Uh... We're talking about phones here.
Related
Whenever my phone is supposed to vibrate with a notification, it vibrates for the shortest possible instant, where it is impossible to feel it when in the pocket, even difficult when its directly in hand. Is anyone else experiencing this issues? Is their a fix? Thanks
Mine works fine
Sent from my SCH-I500 using XDA App
rushringleader said:
Whenever my phone is supposed to vibrate with a notification, it vibrates for the shortest possible instant, where it is impossible to feel it when in the pocket, even difficult when its directly in hand. Is anyone else experiencing this issues? Is their a fix? Thanks
Click to expand...
Click to collapse
go into settings > sound settings and check your "vibration intensity" setting upder hapatic feedback... there's a slider. other that that, not sure.
daavy said:
go into settings > sound settings and check your "vibration intensity" setting upder hapatic feedback... there's a slider. other that that, not sure.
Click to expand...
Click to collapse
Its all the way up, and the problem remains.
rushringleader said:
Its all the way up, and the problem remains.
Click to expand...
Click to collapse
which radio do you have installed? d09? 5?
daavy said:
which radio do you have installed? d09? 5?
Click to expand...
Click to collapse
dl09
10char
Two problems I've been having on froyo. Just addressing them incase anybody else is having the same problems.
1) Haptic on flashed keyboards from rom manager. Mtm blackout and gingerbread don't enable touch vibrate.
2) sms alert won't vibrate. Alert tone is fine, as well as incoming call vibrate, but no sms vibrate.
I am running Dl30 superclean with default theme. Dj05 radio.
Any suggestions?
Sent from my SCH-I500 using XDA App
My suggestion would be to post your question threads in General, not Development.
Sent from my Fascinate using the XDA app
If you are using the messaging app which comes on the rom, to enable vibration upon notification you must do this, at least that is what i had to do.
-go to the messaging app
-press menu button and go to settings
-go to Notification settings
-then under vibrate settings you can change it to always vibrate when notified or only when silent is enabled
suppliesidejesus said:
My suggestion would be to post your question threads in General, not Development.
Sent from my Fascinate using the XDA app
Click to expand...
Click to collapse
Its in development because it has to do with development bugs. Its not an options menu issue. I've played with settings quite a bit now and still haven't been able to get it. Tried flashing the keyboards too.
Sent from my SCH-I500 using XDA App
scottxda said:
Its in development because it has to do with development bugs.
Click to expand...
Click to collapse
Perhaps you should read this then...
scottxda said:
Its in development because it has to do with development bugs. Its not an options menu issue. I've played with settings quite a bit now and still haven't been able to get it. Tried flashing the keyboards too.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Then maybe you should have posted your question in the thread that already exists for Froyo. Or another one of the threads that exists for Froyo. There are several of them. Development is not a place to post question threads. I am more than happy to help, but I will not help people who post in the wrong section despite requests from Moderators to NOT do so. Read what imnuts posted, it's very clear.
imnuts said:
Perhaps you should read this then...
Click to expand...
Click to collapse
That needs to be stickied.
Huh. Weird. My haptic works fine. Weird.
Haptic Issue as well
Baseband is DL09 and build is DL30. I'm nonvoodo. I have haptic checked on and I have the phone set as always vibrate. None of that works. The weird thing is, vibrate and haptic did work after the initial update of DL30 and the only thing I have done since then is load Fring to my phone. I uninstalled Fring just to see if something had gone wrong but nadda. Still no haptic and no vibrate. I have also applied ROMs from Sonofskywalker3 to see if those would fix the issue. I have also taken my phone back to stock and still nothing. I'm about to exhange with verizon...Any ideas?
Strangely enough, haptic and vibrating started working again without me adjusting settings or any other attempt to fix it.. The haptic and vibrate worked for about 30mins and stopped working again. My new phone is being shipped.
My issue has to be hardware related, haptic and vibrate stopped working again. Then, after a few hours, I accidently dropped my phone and it landed pretty hard, haptic and vibrate started work again. My replacement phone is in, so I will consider this case closed and solved and unrelated to software.
I noticed within CWM that there's an option to Enable/Disable Puzzle Lockscreen hidden in the Advanced menu. Would this allow me to disable the lockscreen so I have no lockscreen at all? Or is this used for those using AOSP so they can switch between the two?
Regardless, I'm looking for a way to disable my lockscreen entirely. Any solutions?
Thanks!
DJMaj07 said:
I noticed within CWM that there's an option to Enable/Disable Puzzle Lockscreen hidden in the Advanced menu. Would this allow me to disable the lockscreen so I have no lockscreen at all? Or is this used for those using AOSP so they can switch between the two?
Regardless, I'm looking for a way to disable my lockscreen entirely. Any solutions?
Thanks!
Click to expand...
Click to collapse
There's a thread in development section of this device that has good instructions
Sent from my DROID RAZR using Tapatalk 2
If you're referring to the thread I think you are, that does not help me.
The only thread concerning disabling the puzzle lock provides a method that will also remove the pop-up dialog when holding down the power key. My only concern is removing the puzzle lock. I don't want to change how the phone powers down.
I read a few of the threads in the dev section that I thought might exlpain the CWM feature I'm asking about. None of them have addressed it. Hence why I'm asking people who have the same phone as me.
DJMaj07 said:
If you're referring to the thread I think you are, that does not help me.
The only thread concerning disabling the puzzle lock provides a method that will also remove the pop-up dialog when holding down the power key. My only concern is removing the puzzle lock. I don't want to change how the phone powers down.
I read a few of the threads in the dev section that I thought might exlpain the CWM feature I'm asking about. None of them have addressed it. Hence why I'm asking people who have the same phone as me.
Click to expand...
Click to collapse
I'm trying to see what you were talking about. I looked in my cwm, and I dont see it. I'm i. imnuts native recovery
Sent from my SCH-I400 using Tapatalk 2
Txwolf1980 said:
I'm trying to see what you were talking about. I looked in my cwm, and I dont see it. I'm i. imnuts native recovery
Sent from my SCH-I400 using Tapatalk 2
Click to expand...
Click to collapse
Really? I'm on the VooDoo lagfix version, whatever post I used to get to EC09 had this version up so I assumed all of us here had the same version. I tried it and it did absolutely nothing, so I'm guessing there's something about the Continuum that keeps it from working (the ticker, perhaps?).
DJMaj07 said:
Really? I'm on the VooDoo lagfix version, whatever post I used to get to EC09 had this version up so I assumed all of us here had the same version. I tried it and it did absolutely nothing, so I'm guessing there's something about the Continuum that keeps it from working (the ticker, perhaps?).
Click to expand...
Click to collapse
Possibly. That's the reason apps like no lock don't really work.
Sent from my SCH-I400 using Tapatalk 2
I'm currently thinking of a remapping app (remapping as in changing a physical button's output) , but I do not own a oneplus two. Can somebody tell me what the alert slider's keycodes are?
If any of you is willing to help but do not know how to find such info, I attached an apk (that I built from an open source code) to this post. Please install and open the app then change the alert slider state, screenshot the output then send them to me. Also, please state what ROM version you are running.
When the app is finally released to an xda thread, I'll list all the testers there of course.
P.S: The Alert Slider is that new hardware slider that changes sound profiles, in case you didn't already know
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Swatto86 said:
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Click to expand...
Click to collapse
Swapping the "none" profile and "all" profile was exactly what I was thinking.
Can you please tell me what the output of the other states of the slider was?
EDIT:What you actually sent me was the mapping of the back button
is it possible to map it so loud, vibrate and silent
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
That is what I am trying to achieve. If you own a One Plus Two, please download and install the apk and send me the screenshots after you toggle each alert slider state
The app does not do anything when toggling alert slider unfortunately.
Swatto86 said:
The app does not do anything when toggling alert slider unfortunately.
Click to expand...
Click to collapse
Wow, that is a very unexpected result ._. I'll have to look into the source code then.
Thanks a lot everyone
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
morback said:
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Click to expand...
Click to collapse
yakuzlin said:
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Click to expand...
Click to collapse
Kito92 said:
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
Click to expand...
Click to collapse
I thought about having multiple layout options : battery modes;CPU governors; rotation change etc..
However I still haven't found the alert slider mapping file :/ This is becoming quite frustrating
Will have my OPT soon and will do anything I can to help out with this. Think the All/Priority/None options are not useful at all.
its taking a lot of time ...attached img is for priority ..ie key in d middle..
RulerAk said:
its taking a lot of time ...attached img is for priority ..ie key in d middle..
Click to expand...
Click to collapse
Wow, thanks! How about the two other states? none and all ?
For all its f8(not 100% sure) .... It's takin a looot of time n not recording for d other one..... May b cause m not rooted yet
Sent from my ONE A2003 using XDA Free mobile app
I really hope this works. Good luck on this
The one plus two slider doesnt work with keycode's
toonvanstrijp said:
The one plus two slider doesnt work with keycode's
Click to expand...
Click to collapse
Would you happen to know how it behaves?
thetechnologician said:
Would you happen to know how it behaves?
Click to expand...
Click to collapse
Any updates on this ? Very interested
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
I made an app for it. Try play.google.com/store/apps/details?id=com.nqk.vibratemode (sorry, I need to post 10 posts in order to embed the link
You just need to follow the instruction and enjoy the vibration.
Never seen this icon before on any of my devices and I don't know what caused it. It appears when I am on silent or vibrate so it is probably some sort of interruption notice but I can't figure it out. Thanks
tfly212 said:
Never seen this icon before on any of my devices and I don't know what caused it. It appears when I am on silent or vibrate so it is probably some sort of interruption notice but I can't figure it out. Thanks
Click to expand...
Click to collapse
No clue what it could be - throwing stones - but anything to do with google fit, if you're using it?
tfly212 said:
Never seen this icon before on any of my devices and I don't know what caused it. It appears when I am on silent or vibrate so it is probably some sort of interruption notice but I can't figure it out. Thanks
Click to expand...
Click to collapse
It's the theme you are using that changed the silent icon
akellar said:
It's the theme you are using that changed the silent icon
Click to expand...
Click to collapse
I bet that is it...installed Magpie layer the other day and probably didn't notice that the vibrate icon changed.
tfly212 said:
I bet that is it...installed Magpie layer the other day and probably didn't notice that the vibrate icon changed.
Click to expand...
Click to collapse
It is Magpie. I have it installed and its normal on vibrate.
This thread is hilarious, made me laugh. Thanks OP