I was trying to add some files to System/lib to fix Arabic language problem after i do that and get out of root explorer i tried to access root again .. found it not working then i shutdown my tablet ..turn it on again .. tablet is not starting up and freeze on ideos logo...
- i search the web for any solution some one says press volume up+home +power ..result written on the screen enter fastboot press home+back to restart
- tried to make recovery by pressing home+send +power also nothing happened
My device Model .. Huawei ideos s7 -104- android2.2.2
can any one help me coz.. i don't have official device support in my country..
Related
hi..
the thing is that i cant start my phone.
i hit the power button and it shows sasmung logo button etc.. and just black screen(phone is off now,dunno)
i went into recovery mod (hit the 3 buttons) and it shows that hes downloading something(android guy with shovel)..
plz help i cant turn my phone on!
PLZ HELP!
Hold down volume up + home key + power button then wait the "samsung galaxy s" then release the 3 buttons.
Sent from my GT-I9000 using XDA App
when i do that it says downloading dont remove the target!.
help plz
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Recovery_Mode
Factory reset
On the Galaxy S the soft-reset is achieved by pressing and holding the power button. A hard-reset can executed by pressing and holding VolumeUP+Home+Power. There you will find the options "reboot", "apply sdcard:update.zip", "wipe data/factory reset" and "wipe cache partition".
The "wipe data/factory reset" option will restore your phone to the original configuration of the firmware YOU LAST INSTALLED (including any updates made via update.zip). This will NOT bring your phone back to the firmware installed when you originally bought it unless you haven't flashed your phone.
You can navigate the recovery screen using VolumeUp & VolumeDown and use the Home button to select.
jje
i did the factory reset and when i power on the phone it shows the "S" and just after that its black screen.
help plz
Also got a problem with my phone after updating to froyo 2.2 and then trying to apply a lag fix. Phone starts and I get the flashing S logo then the screen goes blank. Phone occasionally vibrates. Trying the Button Press listed above I'm not getting any options on my screen.
Please invest some effort in trying to solve this yourself. Read posts like these http://forum.xda-developers.com/showthread.php?t=870233, there are many many posts which describe to flash stock roms with Odin
Mine is now 100% bricked with the Screenshot. Did get adb to see the phone and got recovery mode up, didn't know what to do next really with Odin not sure how that software operates or how to re-install files. So unplugged the phone and now after some research thought I'd have another go but oh no its got the logo on it now.
Look 2 posts up ("help me unbrick my Galaxy") and read about Odin. As long as you can get into recovery or download, your Galaxy is not bricked (more a matter of its owner being clueless)
Sent from my GT-I9000 using XDA App
Can't get into download or recovery mode, phone only has that image of the phone computer and exclamation mark now. Odin can't see phone if I connect it to PC. ADB can't locate the device either. Mine is totally bricked.
Wish I hadn't bothered with the upgrade to Froyo 2.2, my phone was operating okay on 2.1. Guess I'll have to call T Mobile in the morning to arrange for a repair/replacement of this handset.
If you could enter download mode before (volume DOWN + home + power), i don't see why you can't now. Pull out your sim card, external sd card and battery, wait a few minutes, then put battery in and try to open download mode. Then just flash whichever firmware you want via odin, and it'll work. I bricked mine two times today , also showed that image with an exclamation mark between a phone and computer.
I couldn't get download mode or recovery on my phone via the button press method. I got it up by having the phone on computer and using the adb command method. As Computer can no longer see the phone I can't use this method to get back to formatting and re-flashing the file.
Please spend some time to read it.
http://forum.xda-developers.com/showthread.php?t=819551
Please help me. I am in a sort of panic right now.
I have a ZTE Blade C2 v809, sold here in Portugal as Meo Smart A12. It was rooted and working fine. I was however getting some error 24's trying to install apps. I thought this might have had to do with using Titanium Backup to remove TouchPal (I did make a backup first), so I decided to restore TouchPal. There were however some errors in the restore and it was stuck there, so I decided to reboot the phone.
Chaos. Now it wont boot. If I press the button normally, the phone boots, I see the android logo, the screen goes black (Not shutdown black, a sort of light black background) and nothing happens. If I try to boot into Recovery mode by holding the power button and the volume down key, I just get the android logo stuck there, nothing happens. If I hold the power button and the volume up key, I get the picture of that laying down android with the message error.
Any more info I must provide please tell me, I am desperate for a solution, If I lose this phone I wont be able to get another one.
Okay I fixed it. Turns out the recovery menu DID work if I waited for a long time and tapped the screen. Used the update.zip available from the site, and it works like a charm
Yay, I bricked my phone, too.
I did something similar, changed recovery-from-boot.p name to recovery-from-boot.p-bak and install-recovery.sh to install-recovery.sh-bak
Now the phone doesn't boot properly, in fact it's stuck in a boot loop:
>starts
>shows white ZTE logo on screen
>restarts
Tried connecting the phone via USB cable and used fastboot devices & adb devices commands, no devices found.
Also tried pressing "power + vol down" and "power + vol up", nothing. I can't enter recovery mode or bootloader.
Apparently the remaining way to get in it's trough the SD slot, or maybe there's another way.
I kindly ask for help, couldn't be possible that I ruined this cell phone so fast.
Ideas, somebody?
i just wanted my zuk phone to get back to the stock rom ,...i tried http://forum.xda-developers.com/zuk-...ofrio-t3332563 Tool to flash stock rom ,.. the rom installed succesfully but when i tried to reboot my phone ,..i ended up with zuk boot logo ,..even i cant access fastboot by vol + pwer .....any solutions !
If there is no access to fastboot, the QPST rom files and QFIL tools is the only go for you now. Search the forums, there is a lot of information on this tool.
siva prakash said:
i just wanted my zuk phone to get back to the stock rom ,...i tried http://forum.xda-developers.com/zuk-...ofrio-t3332563 Tool to flash stock rom ,.. the rom installed succesfully but when i tried to reboot my phone ,..i ended up with zuk boot logo ,..even i cant access fastboot by vol + pwer .....any solutions !
Click to expand...
Click to collapse
I brick my zuk the first day . wait to battery out and screen off now press vol+ vol - and connect to the wallcharger any seconds disconect and use QFil see tutorials on the web , vol+ and connect and you can enter to fastbot and flash stock rom .
xdddd23 said:
I brick my zuk the first day . wait to battery out and screen off now press vol+ vol - and connect to the wallcharger any seconds disconect and use QFil see tutorials on the web , vol+ and connect and you can enter to fastbot and flash stock rom .
Click to expand...
Click to collapse
Hey mate no need , i managd to power off my mobile some how ,..now i can force my phone into fast boot directly by pressing vol up +down at same ,..now my mobile is completely stock and i can receive and update OTA
siva prakash said:
Hey mate no need , i managd to power off my mobile some how ,..now i can force my phone into fast boot directly by pressing vol up +down at same ,..now my mobile is completely stock and i can receive and update OTA
Click to expand...
Click to collapse
Hey,
I used a tool to get my phone back to stock, as i had bricked it in the past.
now i get the zuk logo when i turn the phone on and its stuck at that. nothing happens when i press vol up or down or anything.
any help please?
Hello, so today i was trying to root my Huawei P8 Lite with BetoOS rom. When i installed rom my phone reboot and now phone stucks at huawei logo and thats it.. Nothing happening even after 1h.. I press volume up + power button and nothing, just logo and thats it... What i can do now???
P.S. Sorry for my bad english
http://hi6210sft.blogspot.com/2016/05/unbrick-huawei-p8-lite-via-fastboot.html?m=1
Hello guys again,
I flashed my phone using ODIN today and i downloaded the official ROM from SAMmobile (the same model and country ;serial ....)
The flash is succed but my phone stuck on the first logo screen that shows up 'Galaxy S7 edge Powerd by android'
I tried to power off the device but i can't
I tried to go to recovery mode but i can't
I tried to go to download mode but i can't
I tried to go to safe mode but i can't
I tried to rebot the device but it worked (power button+volume down)
I taked it to the samsung store but it's 7pm now so they are closed and the phone still awake and i really wants to make it work again
any help please
re: reboot phone / firmware
aminebarbana said:
Hello guys again,
I flashed my phone using ODIN today and i downloaded the official ROM from SAMmobile (the same model and country ;serial ....)
The flash is succed but my phone stuck on the first logo screen that shows up 'Galaxy S7 edge Powerd by android'
I tried to power off the device but i can't
I tried to go to recovery mode but i can't
I tried to go to download mode but i can't
I tried to go to safe mode but i can't
I tried to rebot the device but it worked (power button+volume down)
I taked it to the samsung store but it's 7pm now so they are closed and the phone still awake and i really wants to make it work again
any help please
Click to expand...
Click to collapse
Unplug usb from the phone.
Press the power and volume up and volume down and home buttons at the same
time.
As soon as you feel vibration let go of the volume down button while pressing
the volume up, power and home button until you see the samsung logo, then
let go of all the buttons and it should boot into recovery mode.
If it does not boot to recovery mode after doing the above steps 3-4 times
you will need to press volume down and power button until the phone
goes into "download mode".
Once in download mode you will need to re-flash the stock samsung
firmware again.
But this time make sure you flash the correct official version and model#
for your phone's model.
Good luck, have a great day!
Same issue
I have the same issue finaly Turned off. I tried to flash with Stock meteor ireland ,because i have Eir mobile ireland but still the same. I know for sure i have to use meteor. Can somebody help please . Using this https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/MET/