A100 users look here for FLEX-100-REAPER rom
BEFORE YOU DO ANYTHING PLEASE BE SURE TO BE ON THE ICS UNLOCKED BOOTLOADER.
HOW TO DO THIS UNLOCKED BOOTLOADER THING?
For Aroma installer you need to be on one of the following custom recovery's
ezterry's A500PubRecovery
or
TWRP 2.1.3 (not 2.2...)
or
Thor 1.7.3
or
ra-recovery 3.17 (recovery-ra-iconia-3.17-gnm)
INSTALLATION
-first take a full nandroid backup !
-First time installing this rom = wipe all , factory reset , format and make sure to format flexrom!!!
-flash rom first with cwm or RA recovery
-Reboot and do your settings.
-Now you can use the Aroma packages or mods
If you got problems please before posting them do the following.
Performe a REAL format....
here's how to on cwm:
go to in recovery enter "Backup and Restore" and click on "Toggle backup and restore of internal storage (/data/media)"
should say enabled....
then go into "Mounts and Storage" and "format /data"
this will REALLY format data and you will loose all you have in the in the internal memory.
Click to expand...
Click to collapse
FLEX-Resurrection_Rev1-Aroma-Public
CB0D10326EAE374141FFF90A9F30EB9D *FLEX-Resurrection_Rev1-Aroma-Public.zip
BIG THANKS TO EZTERRY FOR FEEDBACK AND HELP !
Based on 1.054.00 and running ezT20 1.0.1 OC Kernel @ 1.2GHz.
If you want stock or other kernel and zRam tweaks see kernel section.
Use the AROMA packages for extra apps on your tablet.
FLEX-THEME_INSTALLER-ver2 (new ressurection mods not included)
-Install 9 different themes , enable/disable AcerRing and a choise of 3 different bootanimations.
-You want more mods , see EXTRA mods a few scrolls lower.
-Or take a look at the extra mods a few scrolls lower.
Click to expand...
Click to collapse
ScreenShot with some extra aroma apps
You can pick different buttons and framework layout in the Aroma installer.
If you select nothing you get stock ICS look
Blue mod (new)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Transparant)
BASED ON 1.054.00_WW_GEN1 & A700 4.0.4
EzT20-V1.0.1 kernel @1.2GHz-Lulzactive
-3 Launchers to pick from , stock Launcher , Apex , Nova
-Android 4.0.4 keyboard
-Busybox 1.20.2-New busybox installer configure busybox to be the primary and not toolbox.
-Build.prop updated for smoother scrolling and dalvik tweaks for deodexed rom.
-DHCP lease patch for wifi @ezterry
-Rooted , su 3.1.3
-Full deodexed -zipaligned
-Init.d support
-Tweaks for memory , internet ,....
-Crypted gps optimazation patch if GPS still don't work fine look here
-Native-Add-Hoc wifi support or use this extra Ad-Hoc patch if original doesn't work , flash with CWM
-Native ntfs support for all kernels , stock Acer , ezT20 and gm-A500-1.5..(Thanks to thor2002ro for vold )
-Development option settings,merci vache
-Little mods to framework and AcerRing by me(in aroma package)
-AcerPrint
-AcerRing , merci vachepour guidée
-SonyBraviaEngine
-Google-Now(in aroma)
Thanks to these people here and this is the "M7- Mikeyxda's version7."
(modded by civato for better icon layout)
-pppWidget for 3Gusb dongle support
-Adrenaline Engine and V6Supercharger tweaks
V6: init.r ramdisk tweaks
V6services.jar tweak
Adrenaline engine: Darky_zipalign(aligns new installed apps on boot) .
Terminal tools
If the auto gps update and mimtempfiles remover don't do there job do the following=
-New GPS updater (lto) terminal command is = su (enter) gps-update(enter)
-Mimetempfile-remover (exchange e-mail temp files) terminal command is = su(enter) remove-mimetempfiles(enter)
Backup tool:
Full ONANDROID backup without the need to reboot.
(Thanks to ameer1234567890)
This backups even your cpuID.
New in this release is it auto detect the externalSD if present to place backup there
Full onandroid backup = command is su (enter) onandroid (enter)
Options in onandroid = su (enter) onandroid -h (enter)
Advanced Options in onandroid = su (enter) onandroid -ah (enter)
databackup command is :su(enter) onandroid -a d(enter) or
su(enter) databackup(enter).
Systembackup command is : su(enter) onandroid -a s(enter) or
su(enter) systembackup(enter)
*clean system (dalvikcache and cache)= command is su (enter) sclean (enter) (from V6 supercharger)
Click to expand...
Click to collapse
Aroma Options:
Code:
[B]"Extra Launcher"[/B]
"APX Launcher", "Launcher with JellyBean look/features, Stock is NOT replaced"
"Nova Launcher", "Launcher with JellyBean look/features, Stock is NOT replaced"
[B] "SELECT_ONLY_ONE look & Framework"[/B]
"BLUE_Trans-LOOK-Mirror-Bar"
"BLUE_Trans-LOOK-Mirror-number"
"BLUE_Trans-LOOK-Mirror-meter"
"BLUE-LOOK-Mirror-Bar" [B]NEW in ressurrection[/B]
"BLUE-LOOK-Mirror-number"[B] NEW in ressurrection[/B]
"BLUE-LOOK-Mirror-meter" [B]NEW in ressurrection[/B]
"BLUE-Transparant-FRAMEWORK"
"BLUE-Special-FRAMEWORK" [B]NEW in ressurrection[/B]
"BLUE-AcerRing", "This replaces the stock AcerRing"
[B] "WIDGETS"[/B]
"AsusWeather"
"DigitalClockWidget2"
"WeatherWidget1"
"WeatherWidget2"
"AgendaWidget"
"MyLocationWidget"
"TaskManager"
"PostIT"
[B]
"GOOGLE-NOW & Social Networking"[/B]
"SocialJogger"
"GoogleNow", "Replace ICS GoogleSearch/VoicSearch/TTS with JellyBean GoogleNow"
[B] "Tools & File Manager"[/B]
"AcerFileApps"
"calculator"
"ApInAp"
"AcerPlanner"
"LumiRead2"
"Supernote"
"Developer_Settings"
[B] "Media Applications"[/B]
"AcerDLNA2"
"ClearFi"
"AcerMedia"
"3DPhotobrowser"
"AcerPrint"
"MusicA_Picasso"
"Asusmail"
[B] "Live Wallpapers & tool"[/B]
"Galaxy4"
"MagicSmokeWallpapers"
"NoiseField"
"PhaseBeam"
"VisualizationWallpapers"
"PhotoWall"
"SimpleWallpaper"
[B] "Keyboards"[/B]
"Asus-Keyboard"
"Acer XT9-Keyboard"
"Swype Keyboard"
"AcerKorIME"
[B] "BootAnimations-SELECT ONLY ONE"[/B]
"A700Default"
"A700-JellYBean"
"AtomicNumbers"
"Vortec"
"Vortec2"
[B]"DATA apps and Tools"[/B]
"EsFileExplorer"
"PhotoEditior"
"Terminal"
"Quickboot"
"PolarisOffice"
"BareCodeScanner"
"Memo"
"BMW Widget"
"GenieWidget"
"GPS-tester"
"Lulzactive"
"Monopoly"
"Real2Racing"
"Solitaire",
"Quadrant"
"Soundhound"
"TitaniumBackup"
"TouchScreenB"
"ToshibaMediaPlayer",
"3GUSB"
HISTORY:
Code:
R3: 27-2-2012:
-28-feb-2012:R4
-2-Ma-2012:R5
-06-Ma-2012: R6-GOLD EDITION
-08-Ma-2012 : R7
-08-Ma-2012 :R8
-09-Ma-2012 :R8 beta2
-11-Ma-2012: R9
-19-Ma-2012: R10
-25-Ma-2012: Added Battery% MODS in mod section
-2-Apr-2012: NEW release R11
-4-Apr-2012: added special R11 mod
-5-Apr-2012: White text mod
-6-Apr-2012: NEW TWEAKED KERNELS
-7-Apr-2012: New White mods
14-Apr-2012: R12 released:
-19-Apr-2012: R12.5 released:
-20-Apr-2012: Acer planner app added
-24-APR-2012: New Transparant mods
-25-Apr-2012:Raster mod added
27-Apr-2012: R12.5-SPECIAL EDITION released.
28-Apr-2012: HC bootloader Tweaked5 kernel that is build in R12.5 Special edition is available in a flashable zip.
29-Apr-2012: R13 released , full 1.033.00 rom based on the ICS OTA of Acer.
-1-May-2012- Released the new Tweaked full root 1.033.00 kernels
-2-May-2012: R14 Released
-8-May-2012: RF1 released
-9-May-2012: New White mod -transparant - MASK menu background (as requested)
-10-May-2012: New RED MOD and White Mod see Special MODS and Optimezd WHite mask mods
13-May-2012: RF1_rv1 released , not a real new release so users on RF1 don't need to flash this.
-17-May-2012:released a patch for the RF1 users so the can update it to RF1_rv1 without the need to reinstall the whole rom.
-18-May-2012:Release RF_rv2
19-May-2012:See patch section above.
20-May-2012: NEW speed optimized Kernels , performance is a little better and "setcpu" is better supported for making profiles(no SoD when using setcpu) (No overclocking , sorry)
-Primary and secondary kernel installer for the people that are on V6 unlocked bootloader , see kernel section
21-May-2012: New Tweaked 3 Speed kernel[URL="http://forum.xda-developers.com/showpost.php?p=26311213&postcount=10"]Kernel Build[/URL] from Source without the SystemWrite protection @ [URL="http://forum.xda-developers.com/member.php?u=3390610"]waydownsouth [/URL]and Speed Tweaks @ civato
23-May-2012: NEW EXTREEM PACKAGE(only for ICS bootloader users)
26-May-2012: EXTREME-PATCH FOR ICS BOOTLOADER USERS ONLY!!
AcerRing disabler & enabler
RELEASE FULL ROM : FLEXREAPER-RF1-EXTREME_EDITION (ICS BOOTLOADER USERS ONLY)
27-May-2012:
-Extreme patch revision2 , kernel updated , solitaire added in data , menu background changed (if you use a mod please reinstall mod)
-FULL ROM revision2
-Bootanimation added.
28-May-2012: Added No games edition and games package
3-Jun-2012: New patch for extreme_rev3 , this updates RF1.... rom to RF1_rev3 EXTREME EDITION (full rom will follow)
Updated kernel
Less aggressive memory tweaks = almost no effect in benchmarks but should give better user experience.
4-Jun-2012:Release full rom rev3
5-6-2012: New custom build bootanimation by JaeKar99
11-Jun-2012: REV4 civato_ezterry Patch release
28-Jun-2012:GOODBYE ROM
NEW RELIXxx WITH SUPERUSER 3.1.3 (in data) instead of the SuperSU for root. (as I think most users prefer this version of root tool). If for some reason root doesn't work , wait a minute or update the "su binary" from with in the superuser app
Added 4.1 JellyBean Android Music2Player and New Playstore (market) and GenieWidget.-7-JUL-2012: NEW RELIXxxX based on 1.054.00 ACER RELEASEenjoy.-NEW RE-FLEX ANDROID 4.0.4 rom , SPECIAL ONE
This is a standalone rom and got nothing to do with FLEXREAPER.
-14-Jul2012
-FLEXREAPER-RF1 switch to FLEXREAPER-RELIX_rev5 Android 4.0.3 : Full 1.054.00 Acer leak based , running stock 1.054.00 kernel with I/O , init.d and GPS tweaks.
If you want to overclock go to the kernel section and flash a OC kernel
-UPDATED all the kernels for the ICS bootloaders..
-15-Jul-2012:Added pre-overclocked kernels.
17-Jul-2012: Added HC-BOOTLOADER_USERS_KERNEL_1.054.00 Tweaked - GPS - I/O - init.d - Full root, for the people that want to run these roms on there tablet with HC bootloader
8-Aug-2012:Added GOOGLE NOW installer for RELIX and RE-FLEXxx
9-Aug-2012: New GoogleNow installation package :
This one removes the VoiceSearch app and give better search Icons (the previous has got 2 google icons in left corner what looks stupid)[COLOR=Red][B]9-Aug-2012:[/B][/COLOR]
[COLOR=Red][B] Release RE-FLEXxx_rev5.2 see that thread for more details[/B][/COLOR]
Release FLEXREAPER-RELIX_Rev6
[COLOR=Red]13-Aug-2012:[/COLOR]
RE-FLEXxx-STRYKER RELEASED
[B][COLOR=Red]18-Aug-2012: [/COLOR][/B]
[B][COLOR=Red] Update patch to REV2 for STRYKER users and full rom (see RE-FLEXxx thread)[/COLOR][/B]
[B][COLOR=Red] 20-Aug-2012[/COLOR][/B]
[B][COLOR=Red] New KERNELS with better Init.d support for all users and.[/COLOR][/B]
[B]20-Aug-2012:[/B]
[B] -New FLEXREAPER-RELIX_Rev7 [/B]
[B]What is new:[/B]
see rom features
For the RELIX_Rev7 build I would like to thank:
-ezterry (Kernel)
-ameer (Backup scripts)
-zeppelinrox (V6Supercharger)
-ImbaWind (Adrenaline Engine)
-thor2002ro (ntfs support vold)
2-Sep-2012
Rev7 to Rev7.1 Patch
Important update regarding GPS lto update.
11-Sep-2012:
V2.0 linuxsociety kernel and zRam tweaks added in[COLOR=Black][URL="http://forum.xda-developers.com/showpost.php?p=22985373&postcount=14"] kernel section.[/URL]
Modded to work on RE-FLEXxx and FLEXREAPER[/COLOR]
[SIZE=2][B][COLOR=Red]15-Sep-2012[/COLOR]
NEW FLEXREAPER-ReliX-GT version
Different installation process with other kernel tweak so the new nandroid backup works.[/B]
[B]New Kernels to work with the new version.
[/B]Old kernels will break nandroid backup feature so I removed them.[/SIZE] [SIZE=2]
Don't use the new kernels on older roms.
[B][COLOR=Red]27-Sep-2012[/COLOR]
[B]New FLEXREAPER-RELIX-GT_Rev1.1 full rom released
Asus keyboard , swype keyboard
Onandroid updated (backup-tool)
Holo launcher removed (didn't like it)
APX 1.3.1 Launcher is now in data\app (so can be removed from within the app drawer)[/B][/B][/SIZE] [SIZE=2]
AND from now on [/SIZE] [SIZE=2]
[COLOR=Red][B]NEW on RELIX-GT_Rev1.1: If you are on a FLEXREAPER version no need to do a full wipe (your data and settings will be untouched) , necessary cleaning is done on installation! You only need to download it and install it with custom recovery![/B][/COLOR][/SIZE]
02-Nov-2012:Release of the new FLEX-Ressurrection-Aroma_Rev1
4.0.4 Android based now.
Apps updated.
Aroma installer with countless options on installation.
New mods
Main goal of this rom is stablity, installing some extra apps or settings can influence the stability (Asus Mail , Developer settings)
All mods for FLEXREAPER will work on this rom.
Click to expand...
Click to collapse
EXTRAMODS
(most of these mods are in the "Aroma Theme Installer") Before you flash a mod you reboot first and use the ring, then you go back to recovery to flash the mod.
Blue-buttons-NO battery%
BlueMirror-buttons-NO battery%
Stock-buttons-NO battery%
StockMirror-buttons -NO battery%
Battery% MODS Stock ICS look
Blue-buttons-Battery%
BlueMirror-buttons-Battery%
Stock-buttons-Battery%
StockMirror-buttons-Battery%
Special MODS
FULL-STOCK-ICS LOOK- Blue-buttons - Battery%
RF1-DEFAULT-LOOK(transparant)
Black-Blue-Silver(R12.5 LOOK)
Blue-Tone (R12 look)
GreenBlue(R11look)
GOLD-MOD
TRANSPARANT MODS (same layout / BlueMirror buttons - Battery%, different menu picture)
MASK
NVIDIA-LOGO
RASTER
GoldRing Gold Rastermenu background , Blue buttons , Battery% , transparant mod
Special editions(Active topbar is smaller in some apps with these white mods , because framework is modded for white clock text)
White statusbar mod + white text and battery % mod+ special R11 edition mod
White statusbar mod (circle-battery% stock buttons)
White statusbar mod (circle-battery% -custom buttons)
WHITE MASK MOD STOCK BUTTONS
WHITE MASK MOD CUSTOM BUTTONS
RED MOD (transparant , Red text , buttons , etc.........)
WHITE-MOD (Transparant , White text , etc....)
ACER RINGS
Titanium AcerRing (R9 look)
Gold AcerRing (R6 look gold edition)
R10 AcerRing Special edition (transparant outerring and different search icon)
AcerRing-Black-RF1-default ring
AcerRing-Dancer
AcerRing-Gasmask
AcerRing-BlackBlue-R12.5
AcerRing-GOLD-special-R12.5
AcerRing-GreenBlue
GreyBlue AcerRing (R10 look)
ACER STOCK RING
OLD-MODS
GOLD RING
SILVER RING
BLUE RING
More mods by Oijkn
Click to expand...
Click to collapse
I cannot do this alone , this is a xda project, people that helped so far :
richardtrip
vache
smaury
waydownsouth
drellisdee
sp3dev
euclid's brother
ezterry = big thank you sir for all the help !!
Button mods and stock: (mirror effect buttons by "55Pegasus")
sorry if i forget someone !!
Great job by all devs that made this possible... gonna give it a go.
Server is sloooooow
Thanks civato, Richard, and vache for all your development.
Is there any major SOD?
Sent from my Acer Iconia A500 using Tapatalk
10507 said:
Is there any major SOD?
Click to expand...
Click to collapse
Yes, you should READ, it's in the OP.
lowsum said:
Yes, you should READ, it's in the OP.
Click to expand...
Click to collapse
The SOD timeout period is around 2-3 seconds. So don't turn the screen off because as soon as you do you have to hard reboot. Going back to honeycomb as i presumed timeout would be ALOT longer than 2-3 seconds. Good work though, will monitor this thread very closely waiting for fix.
looking at the leak thread this might not be long...
I have enough faith a fix will be along soon that I'm sticking with this rom.... Aside from the sod its perfect and runs fast as anything, I just won't turn off my screen till I'm ready to shut down.
Great work!
Haze028 said:
I have enough faith a fix will be along soon
Click to expand...
Click to collapse
civato said:
NO SUPPORT ON THIS
Click to expand...
Click to collapse
And people wonder why all of our devs are leaving. You people are retarded, and should be ashamed of yourselves for not reading the damn threads before posting. Between this and the morons spamming Vache's thread with "ZOMG GUYS IT HANGS AT THE ACER SCREEN HELP!" its amazing anyone wants to make roms for this tablet. Read or dont freaking post.
wow lets test this
let me try this
waiting for it so long
temporary fix for SOD see first post, thanks to Richard.
nifterific said:
And people wonder why all of our devs are leaving. You people are retarded, and should be ashamed of yourselves for not reading the damn threads before posting. Between this and the morons spamming Vache's thread with "ZOMG GUYS IT HANGS AT THE ACER SCREEN HELP!" its amazing anyone wants to make roms for this tablet. Read or dont freaking post.
Click to expand...
Click to collapse
I knew it wasn't working when flashing... what is it that I didn't read before posting? Not positive but I'm pretty sure posts involving swearing and ignorance do a better job of keeping the devs out than posts thanking them...
Plus... this was started, in my understanding, to keep unneeded posts our of the dev thread for the leak. This is to discuss the test rom made by the great efforts if vache and richardtrip...
Sorry I'm done with my little rant, just can't stand unnecessary ignorance.
Sent from my MB860 using XDA App
thanks bro keep up the good work.........on a side note since this is the first custom ics rom thats cwm flashable shouldn't the ics bounty go to civato
Kernel section
THESE KERNELS CAN BE USED ON FLEXREAPER-...., FLEX-Ressurrection and RE-FLEXxx
Source by Acer and thank you "ezterry" , couldn't have done the patching without you teaching me and giving me your time.
Installation: flash with cwm or RA recovery , but please also put the stock version on your tablet so you can flash back if you have problems
From 15-Sep-2012 these kernels work only on FLEXREAPER-ReliX-GT & RE-FLEXxx-ShellSHOCK :
The reason for this is Flexrom installation is changed on rom installation, this was done for the nandroid backup support from terminal. For this ramdisk of kernel had to change.
Flexrom(vendor) still excist it is just the way it is installed and running.
ICS bootloader users ONLY:
Stock-Kernel_Acer-Relix_GT-&-RE-FLEXxx_ShellSHOCK (no overclocking)
ezterry kernels for ICS bootloader users:
[email protected]_GT-&-RE-FLEXxx-ShellSHOCK(overclock with a app)
[email protected]_GT-&-RE-FLEXxx-ShellSHOCK Max overclock speed is 1.5GHz , use a app.
[email protected]_GT-&-RE-FLEXxx-ShellSHOCK ramping up to max speed at 70% load (stock kernel is 80%) =Special STRYKER Edition , default 1.5GHz lulzactive bfq. UV and Underclocking is possible with app.
gm-A500-V2.0.. kernels for ICS bootloader users:
gm-V2.0-LulZ-1.0GHz-ReliX_GT-&-Re-FLEXxx-ShellSHOCK(overclock with a app)
gm-V2.0-LulZ-1.2GHz-ReliX_GT-&-Re-FLEXxx-ShellSHOCK Max overclock speed is 1.5GHz , use a app.
gm-V2.0-LulZ-1.5GHz-ReliX_GT-&-Re-FLEXxx-ShellSHOCK.ramping up to max speed at 70% load (stock kernel is 80%) = default 1.5GHz lulzactive VR. UV and Underclocking is possible with app.
gm-zRam tweaks modded for use with RE-FLEXxx and FLEXREAPER.
These mods are 99% based on "linuxsociety" zram tweaks I only changed installation permissions so it works on my roms.
gm-zram-300mb-RE-FLEXxx_FLEXREAPER-Edition.zip~40% free memory is the objective
gm-zram-350mb-RE-FLEXxx_FLEXREAPER-Edition.~50% free memory is the objective
Kernel ramdisk tweaks and mods (DEV only)
For the nandroid feature
In init.picasso.rc
Code:
#mount ext4 /dev/block/mmcblk0p6 /system/vendor wait ro noatime nodiratime
this way the online nandroid can do his thing from terminal.
I also had to change installation proces of the rom.
Click to expand...
Click to collapse
For I/O speed tweaks
In init.picasso.rc
Code:
on fs
mount ext4 /dev/block/mmcblk0p3 /system wait ro noatime nodiratime
setprop ro.crypto.tmpfs_options size=128m,mode=0771,uid=1000,gid=1000
mount ext4 /dev/block/mmcblk0p8 /data wait noatime nosuid nodev nodiratime noauto_da_alloc
mount ext4 /dev/block/mmcblk0p4 /cache wait noatime nosuid nodev nodiratime noauto_da_alloc
#mount ext4 /dev/block/mmcblk0p6 /system/vendor wait ro noatime nodiratime
chmod 660 /dev/block/mmcblk0p5
chown root system /dev/block/mmcblk0p5
Click to expand...
Click to collapse
For pre-overclocking and governor settings
(only possible on a zImage that support OC)
(example of 1.5GHz lulzactive 70% full load to max speed)
In init.picasso.rc
Code:
# Power management settings
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 216000
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 1504000
write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor lulzactive
write /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq 216000
write /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq 1504000
write /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor lulzactive
write /sys/devices/system/cpu/cpufreq/lulzactive/go_maxspeed_load 70
write /sys/module/cpuidle/parameters/lp2_in_idle 0
Click to expand...
Click to collapse
Auto GPS update
(you also need the correct bin file)
In init.picasso.rc
Code:
# Force download of long term orbit data (lto.dat)
# for Broadcom aGPS
# Thanks to waydownsouth @ XDA
# http://forum.xda-developers.com/showthread.php?t=1636757
service gps-lto-dat /system/bin/logwrapper /system/bin/get-gps-lto
user root
group root
disabled
oneshot
on property:init.svc.wpa_supplicant=running
start gps-lto-dat
Click to expand...
Click to collapse
V6 supercharger tweak
(but you need a modded services.jar also)
In init.rc
Code:
on boot
# V6 SuperCharger, OOM Grouping & Priority Fixes created by zeppelinrox.
# SuperMinFree Calculator & MFK Calculator (for min_free_kbytes) created by zeppelinrox also ;^]
#
# See http://goo.gl/krtf9 - Linux Memory Consumption - Nice article!
# See http://goo.gl/hFdNO - Memory and SuperCharging Overview ...or... "Why 'Free RAM' Is NOT Wasted RAM!"
# See http://goo.gl/4w0ba - MFK Calculator Info - explanation for vm.min_free_kbytes.
#
# DO NOT DELETE COMMENTS. DELETING COMMENTS WILL BREAK UNINSTALL ROUTINE!
#
# BEGIN OOM_ADJ_Settings
#
# This ROM (Android 4.0 and greater) requires a PATCHED services.jar
# The ADJ priorities that were here DO NOT work anymore!
#
# END OOM_ADJ_Settings
#################=##################
# Kernel & Virtual Memory Tweaks #
####################################
write /proc/sys/vm/min_free_kbytes 22118
write /proc/sys/vm/oom_kill_allocating_task 0
write /proc/sys/vm/panic_on_oom 0
write /proc/sys/vm/overcommit_memory 1
write /proc/sys/vm/swappiness 20
write /proc/sys/kernel/panic_on_oops 0
write /proc/sys/kernel/panic 0
write /sys/block/mmcblk0/bdi/read_ahead_kb 2056
# End of KVM Tweaks
# End of V6 SuperCharged Entries.
Click to expand...
Click to collapse
init.d support
In init.rc
Code:
# Run init.d scripts
service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
class main
user root
group shell
oneshot
Click to expand...
Click to collapse
In default.prop
Code:
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.strictmode.visual=0
persist.sys.usb.config=mtp,adb
service.adb.root=1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Aroma Packages
CUSTOMIZING "AROMA" PACKAGES FOR FLEXREAPER AND RE-FLEXxx
FLEX-WIDGAPP-INSTALLER-ver2(274MB):
install all the Acer apps , extra apps and Widgets that you want . (Games/Acer file managers are installed in data so can be removed from within the app drawer)
FLEX-WIDGAPP-INSTALLER_noGames-ver2(130MB)
(Same as package above but no games so file is smaller)
FLEX-WIPER-ver2: (3.8MB)
Use this if you want to remove any of the apps or widgets you installed with the FLEX-WIDGAPP-INSTALLER (except , games/Acer file managers are removed from within the app drawer)
civato said:
come on people , take a chill pil , hope you enjoy the custom leaked rom.
All feed back is welcome but until the SOD problem is not fixed it stays a test beta version.
I put this together in a quicky so everybody could have taste of ICS without having to do difficult stuff that I don't even get !
Click to expand...
Click to collapse
Sorry for mucking up your thread with bickering... comment rubbed me the wrong way this morning.
Anyways this leak runs awesome if you use the wake lock app Richard suggested... noticed the distorted boot screen stays up longer if you use a custom boot animation... but that's neither here nor there. Doesn't effect operation obviously.
Sent from my MB860 using XDA App
camera performence is better tahn 3.0.2 and also video playing is improved without installing codecs or players.
thaks for sleep fix ,,, great work
As mentioned it is okay flashing with CWM 1.6, but has anyone tried flashing this with Ra Recovery?
Thanks
Front facing camera
Hi.
I don't know if it is just my unit, but after installing the leaked ICS ROM, the front facing camera seems to be out of order.
And after launching an app that tries to connect to the front facing camera, the camera on the back stop working too. Until I restart the unit
Anyone else experiencing problems with the front facing camera?
10507 said:
As mentioned it is okay flashing with CWM 1.6, but has anyone tried flashing this with Ra Recovery?
Thanks
Click to expand...
Click to collapse
I was able to flash using RA. No problems.
Sent from my Galaxy Nexus using Tapatalk
Related
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Not sure which is the best ROM, it's relative. So far, for stock ROM lovers you can use Blackhawk ROM by ketut.kumajaya
Best Kernel
CF-Root for S5830. I have no comments. An amazing kernel.
Best RAM Tweak (for stock ROMs without CF-Root only)
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Best Animation Tweak (will smoothen animations on stock XXKPH ROM and activate CRT animation on coderom)
Not sure who share this tutorial, but you will get smooth animations after you have applied this tweak. Using Root Explorer, mount /system/ to RW, edit build.prop, find debug.hw, add a hash "#" before it. Save and reboot. Original post here.
For the best result: make sure you have activate a2sd and convert filesystem to ext4 using ext4 Manager (available through CF-Root) and do NOT apply Conservative Gov (when applied, it will save battery life but will slow down performance)
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
I was gonna install coderom for the reboot button feature (on phone options), but the link was down.
Please add this: enabling crt on gingerbread rom by adding a hash (#) to debug.hw in build.prop smoothen everything a lot, especially popups.
XDA ♥
- XXKPH
- Easy Deodex + Root (XDA)
- Zipalign on boot setting from A2SD GUI
- CF -Root updated to b78
- update to CWM 4.0.0.9
- Internal memory converted to ext 4 (by ext4 manager)
- set tweaks => default (no checked list)
thats great combine! i've used this...
very smoothly guys...
thanks,just flash up the RAM optimizer with CWM~
fla.sh said:
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Coderom.NexusAce by code28h4p. The original download link was removed by Moderator because it's contains warez.
Further instructions: How to flash coderom.nexusace and How to setup a2sd with coderom.nexusace.
Best Kernel
CF-Root for S5830. Original post (in Indonesian) here.
Best RAM Tweak
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
Click to expand...
Click to collapse
Hi fla.sh,
I don't think anyone will go wrong when they have great combo like this. I have all of them in my SGA. (Of course with CRT as mentioned by consegregate)
Now my ace runs very smoothly.
Hey, if I apply the ram optimization... how do I get to the original configuration? A flash of the kph rom (the one i have) would be enough?
I'd say just deleting the script file should be enough.
And lol that's exactly what I have on my Ace. Plus the CRT animation.
Tap-a-talked from my Galaxy Ace
Diliban said:
Hi fla.sh,
I don't think anyone will go wrong when they have great combo like this. I have all of them in my SGA. (Of course with CRT as mentioned by consegregate)
Now my ace runs very smoothly.
Click to expand...
Click to collapse
Hi,
I have this question for you... Do I need to install everything in the post CF-Root for S5830 like CF root manager, Tweak, EXT4 Manager etc., or just the below mentioned part is enough?
I just flashed this part to my SG Ace.
Instructions (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip CF-Root-S5830-v3.7-b78.zip
- (USB) Disconnect your phone from your computer
- Start ODIN v4.38
- Click the OPS button, and select Cooper_v1.0.ops
- Click the PDA button, and select CODE_S5830XXKPH_CL260130_REV03-CF-Root-v3.7-b78.tar.md5
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
I tried Quardant after installing this Kernel which gave me 1043 (sdcard class 2) which is as equal to what I got before without this kernel. What is your thought?
Quadrant won't show any difference until you convert your system to ext with the exr4 manager.
Tap-a-talked from my Galaxy Ace
Hi mate, any chance of a pm maybe ?with the bit's to try this rom out? can't find dou to link being removed. thanks.
Added CRT animation tweak
QNBT said:
I was gonna install coderom for the reboot button feature (on phone options), but the link was down.
Kind enough to PM it to me?
Thanks in advance!
Google it, type "coderom nexus" first result its the rom 4shared download.
Click to expand...
Click to collapse
CF-Root have all Juwe's RAM script options with different values. If you don't mind, I could write a CWM update package to set CF-Root using JRS value and enabling animation CRT ("setprop build.sf.hw 0").
ketut.kumajaya said:
CF-Root have all Juwe's RAM script options with different values. If you don't mind, I could write a CWM update package to set CF-Root using JRS value and enabling animation CRT ("setprop build.sf.hw 0").
Click to expand...
Click to collapse
Wow... I don't know that. I was including JRS just because if someone has XXKPH rom without CF-Root, they can increase free RAM
a little bit Indonesian: Om Ketut kapan nih release CF-Root berikutnya?
fla.sh said:
Wow... I don't know that. I was including JRS just because if someone has XXKPH rom without CF-Root, they can increase free RAM
a little bit Indonesian: Om Ketut kapan nih release CF-Root berikutnya?
Click to expand...
Click to collapse
But only CF-Root executing script in /system/etc/init.d
Rencana u/ CF-Root:
1. Menjalankan dtapps2sd script di mode recovery
2. Kompilasi ulang kernel untuk mendukung ext4 data writeback
fla.sh said:
This is a list of Galaxy Ace ROM, kernel, and tweaks that (when combined) will make your Ace run blazingly fast!
Tested by me.
I'm not responsible if your Ace went wrong. Make a backup first.
Before we start, make sure you have backup for your important data and applications.
Best ROM
Coderom.NexusAce by code28h4p. The original download link was removed by Moderator because it's contains warez.
Further instructions: How to flash coderom.nexusace and How to setup a2sd with coderom.nexusace.
Best Kernel
CF-Root for S5830. Original post (in Indonesian) here.
Best RAM Tweak
Juwe's RAM optimization script. It's working fine on Ace, but the boot time will take longer than usual.
Best Animation Tweak (will smoothen animations on stock XXKPH ROM and activate CRT animation on coderom)
Not sure who share this tutorial, but you will get smooth animations after you have applied this tweak. Using Root Explorer, mount /system/ to RW, edit build.prop, find debug.hw, add a hash "#" before it. Save and reboot. Original post here.
For the best result: make sure you have activate a2sd and convert filesystem to ext4 using ext4 Manager (available through CF-Root) and do NOT apply Conservative Gov (when applied, it will save battery life but will slow down performance)
Okay, that's all.
Please report to me if you get something wrong so I can revise this thread.
Click to expand...
Click to collapse
Hi All,
I have an issue (may be not), I haven't installed the DT a2sd addon from this thread as I already run on coderom Nexus which has DT a2sd. I entered into Terminal and typed SU and then a2sd repair. After boot I saw i have only 24MB as EXT4 in a2sd GUI and Dalvik cache moved back to internal memory, but I created 2GB as EXT4 while partition which still appears in my Titanium backup. Did I do anything wrong? Which app is correct? Please help. I have uploaded screenshots from both apps.
royskeyz said:
QNBT said:
Google it, type "coderom nexus" first result its the rom 4shared download.
Click to expand...
Click to collapse
Thanks for the tip!
Still wondering if i'm able to backup my current data with CWM and restore them with the new ROM
Click to expand...
Click to collapse
Attachments here... Sorry missed them in the last post
I switched to a I9001 Galaxy S Plus, thus no more updates.
About
If You are like me - a fan of those monolithic install-and-forget scripts to optimize Your Ace at boot then this is for You.
As a base i took Slaid480's LagFreeV3 script and fixed some errors in it. Seeing that his script constantly overwrites earlier tweaks set up in itself i went on to consolidate it.
After that turned out succesful i combed through all the other scripts, snippets and tweaks floating around XDA (TurboBoostv8.5, BoostBuster, allinone Ram) and came up with my solution of a monolithic All-In-One script.
This here script contains all the useful tweaks for the Ace, was error checked, optimized and thoroughly tested on my personal Ace.
This is a continuation of the thread:
[SCRIPT] Slaid480's LagFree V3 script -fixed- -optimized-
http://forum.xda-developers.com/showthread.php?t=1486930&page=11
Required
* Ace S5830
* Root
* CM7.x
* Busybox (should already be there if rooted)
* Kernel supporting NOOP scheduler and SmartA**V2 governor
Script was tested on:
zImage-Mod v1.1 and v1.2 Kernel
http://forum.xda-developers.com/showthread.php?t=1292200
CM7.2 RC0 KANG by vo-1 deodexed with PDroid
http://forum.xda-developers.com/showthread.php?t=1462178
Instructions
- Make a nandroid of Your phone (just in case).
- Flash zip using CWM recovery.
- Reboot.
- Success.
An optional error logging function can be enabled by creating an empty
file named lagfree_debug in Your /data/ folder. Doing so will allow the
script to create a logfile /data/lagfree_debug.log during execution on
boot. This might help for finding issues on other ROMs and Kernels.
The script now contains some logic so when it does not succesfully run
to its end it will disable itself on the next boot. This will fix the "stuck
on android" issue.
To remove the script alltogether just flash the LagFreeV3_Rerolled_
Uninstaller.zip via CWM.
Credits
* SLAID480
* GadgetCheck
* Juwe11
* Salah Abouabdillah
* Einherjar Development Team
* CRANIUM ROM
* zacharias.maladroit
* voku1987
* [email protected]
* redmaner
* pikachu01
* fuss132
* LeonardLuangga
* Team Blockbuster
* tossan
* iandol
* _Roysten
* dragonnn
* XDA (for the help identifying the bugs)
* Everyone (i forgot but who put an effort into parts of this script)
Enjoy,
g_BonE
Changelog
0.17b - first release in XDA Development subforum, replaces older version --- REMOVED DUE TO setprop ISSUE!!!
0.23b - second release, replaces older version: setprop slot fix and bootloop (stuck on android) fix implemented. Thanks to tossan, iandol, _Roysten and dragonnn for the detective work and help getting this fixed.
Now, thank you! And why is it that we need CM7? Isn't this supposed to run on stock roms (rooted of course, and with cf-root kernel)?
WAIT so is this the combination of the given tweaks in OP or just fixed Lagfree? Kinda confusing O.O
original lagfreev3 runs great on stock with all permissions checked. Is this for stock also?
itasoulas said:
original lagfreev3 runs great on stock with all permissions checked. Is this for stock also?
Click to expand...
Click to collapse
if you consider "runs great" to mean that it fails to run properly because it has more bugs than the Amazon Jungle and thus it can run "great" anywhere because it actually fails to run everywhere!!!
lagfreev3 original is like homeopathy!
How do I install this over original lagfree?
Sent from my GT-S5830 using xda premium
iAreBeRtii said:
How do I install this over original lagfree?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Why do you want to install it over the original one? It was stated that it has too many bugs. Just delete the old one and flash this.
actually no need to uninstall, the installer of my script removes the original lagfreev3, turboboost and other scripts from init.d
and no, no need to install anything else besides this one its ALL INCLUDED
does this work on stock?
g_BonE said:
actually no need to uninstall, the installer of my script removes the original lagfreev3, turboboost and other scripts from init.d
and no, no need to install anything else besides this one its ALL INCLUDED
Click to expand...
Click to collapse
so, just install this script, and we're done?
Cool! Thanks gbone, you's a boss!
flashing your script makes my phone stuck on boot. i have LeWa rom installed. also, lagfreev3 and turboboostv8 is installed..
tomy2590 said:
flashing your script makes my phone stuck on boot.
Click to expand...
Click to collapse
Wait awhile and see if the desktop loads. I guess it takes time to rebuild the caches.
@g_BonE
You sholdn't clean up the caches (especially the *.apk files) on every reboot (->Dalvik Optimization).
The user can do it manually in CWM. This is only necessary before installing a custom rom or after modding some system files.
Otherwise: Great clean up work done! Hope all the script lovers appreciate it. Here are the line counts as a rough comparision:
Code:
[email protected]:~/Downloads/$ wc -l S9*
1130 S95Lagfree
305 S99_LFv3gB
1435 total
^^
@DooAce: I cant positively answer on the "working on stock" question as idont have a stock rom on my ace. i'd say it *should* if the rom has init.d support and the other requirements posted in the first post. anyone willing to give it a shot might do so using the debug feature and posting the logfile here so i can have a look.
@tossan: yes, i'll make the zipaligning a optional step, maybe using the same approach i took with the debug option (-soon-)
@tomy2590: and yes, first boot will take a while as zipaligning and database optimization takes a while. please be patient for a bit.
Doesn't work on Ace-of-Spades V1 - stuck on Android for over 20 minutes.
I have debug this script - don't know why but it's stuck on the setprop lines, removing it will repair this script. You can add on the begin of this script the command:
Code:
adbd &
And on the end:
Code:
killall adbd
Using this you can debug this script (via logcat) in real time and show on what he stops.
g_BonE said:
@tossan: yes, i'll make the zipaligning a optional step, maybe using the same approach i took with the debug option (-soon-)
Click to expand...
Click to collapse
I'm referring to this line at the end of the file, which will be executed on every phone reboot, making the dalvik cache unusable.
Code:
rm -f /data/dalvik-cache/*.apk
The zipaligning should be ok, because the code fragment only zipaligns new installed apks, if they're not already aligned.
~~
Phone rebooted succesfully afyer flash themyhrom advanced
g_BonE said:
actually no need to uninstall, the installer of my script removes the original lagfreev3, turboboost and other scripts from init.d
and no, no need to install anything else besides this one its ALL INCLUDED
Click to expand...
Click to collapse
Awesome! Thanks!
Sent from my GT-S5830 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
◢ Credits @ Thanks to:
# XDA - for this place, tutorial, reference etc
# Android - for OS platform
# Samsung - for firmware & platform
# Google - for references, resources etc.
# CyanogenMod - for ROM/sources
# vo-1 - for ROM
# lovetz - bring infomation ROM to XDA
# ketut.kumajaya - The greatest Blackhawk Kernel
# dragonn - Firekernel version
# Achep - for ICS Theme & Layouts
# balamu96m - CM9 Style Settings tutorial
# lagloose - GPS and Sensors patch
# itasoulas - hw Library GPS & Sensors patch
# happily1986 - Solutions for faster GPS locks
# imbawind - for Adrenaline Engine
# nutellabanane - Google gears bootanimation
# slaid480 - build.prop tweaks tutorial
# knzo - build.prop tutorial
# hubix - tutorial easy flash recovery
# pyronia - for easy guideline script making
# yagya - for PDroid Patch tutorial
# tj_droid - for tutorial decompile/compile using APKManager
# P4qui7o - for tutorial manually deodex
# skynet28 - Tools for Disable and enable journaling in internal ext4 Partitions
# All friends here - for supports & reading my topic
# batting1000 - Guide for LauncherPro Ice Cream Sandwich setup look alike
# Your name here - PM me if you think, you should be here (may be I'm forgot)
◢ Short Intructions:
1. CWM5 recovery - flash "TRANSX3RC3-FIREKERNEL.zip " or " TRANSX3RC3-BLACKHAWK.zip " - reboot
2. CWM5 recovery - flash "TRANSX3ICSLayouts-patch.zip" – reboot
3. Done!
◢ Recommended for flashing:
✔ TRANSX3ICSLayouts-patch.zip
✔ TRANSX3-CCLOCK.zip (flash after flashing "TRANSX3ICSLayouts-patch.zip")
✔ JournalingDisabler.zip
◢ Download ROM:
File: TRANSX3RC3-FIREKERNEL.zip (mediafire.com)
CRC-32: 0f061b04
MD4: 60a538e71d3ac22169270ed89d7ec6db
MD5: ee5156f88a63830ad77c7bca4f032d68
SHA-1: 30f4d6c131fa0f2aff6a18d3930bbfb236229a13
OR
File: TRANSX3RC3-BLACKHAWK.zip (mediafire.com)
CRC-32: bdb6e793
MD4: 15fbf0419cc9e3705de465162566e3e6
MD5: ee25f41656b25f86c15a544f9c9ac12a
SHA-1: 3ae2e9b08551e24b8b328c2224eca2186ec4f1bd
◢ ChangeLog TRANSX™.III.RC3:
- 2 Version BlackHawk kernel & Firekernel (choose yourself)
- Base on CM7.2.0 RC3 Official mixed with CM7.2.0 RC3 by vo-1 for some libs
- Preinstalled PDroid & Patchers
- Preinstalled Launcher Pro
- Preinstalled Ice Cream Sandwich theme
- Added scripts & Tweaks
- Integrated ICS Cm9 Style Settings
- Integrated Slim Lock Patterns & semi transparent circle
- Integrated Slim SIM PIN Code Entry
- Integrated text correction for USB Mass Storage description
- fast & lite bootanimation only 71kb in size
- app2SD work
- link2sd work
- foursquare work
- google goggles fix
- fix widget option force close
- fix Google Play Store: showing app is incompatible with...missing library....etc.
- Fix widget option force close under lockscreen settings
- Fix force close Gallery3D
- no warez inside
◢ Bugs:
- Adrenaline™ Engine 4.X not intergrated. Pls go here for download "Adrenaline Engine_CM_4.2b.zip"
◢ Full Intructions:
A. ROM Installation procedure:
0. Put "TRANSX3RC3-FIREKERNEL.zip " or " TRANSX3RC3-BLACKHAWK.zip on your sd-card
- Boot into CWM5 Recovery
- wipe data/factory reset, wipe cache/dalvik
- format cache/data/system/sd-ext
- flash
- reboot
- done!
B. ICS Layouts Installation procedure:
1. Put TRANSX3ICSLayouts-patch.zip and TRANSX3ICSLayouts-undo.zip on your sd-card
- Reboot into CWM
- mount system, flash TRANSX3ICSLayouts-patch .zip, reboot
(Mine only 1 flashing it work. If not work for 1 flashing, follow steps below)
- Reboot into CWM again
- mount system, flash TRANSX3ICSLayouts-undo.zip, reboot
- Reboot into CWM one last time
- mount system, flash TRANSX3ICSLayouts-patch .zip[/URL], reboot
2. Figure GPS by your country..... (except Malaysia - already figured for Malaysia)
◢ Removed files:
ADWLauncher, Androidian, CMWallpapers, Cyanbread, Development, DSPManager,
Email, FileManager, Gallery3D, HTMLViewer, LiveWallpapers, LiveWallpapersPicker, MagicSmokeWallpapers, Pacman, PicoTts, Protips,
Provision, QuickSearchBox, RomManager, Stk, Torch, TtsService, VisualizationWallpapers, VoiceDialer, VpnServices
Description about removed files [ here ]
◢ Optional:
- Statusbar Center Clock:
Reboot into CWM – mount/system - Install from sdcard - choose zip from sdcard - flash "TRANSX3-CCLOCK.zip” (flash after flashing "TRANSX3ICSLayouts-patch.zip")
----------REBOOT----------
- Back to standard CM7 Style Settings
Reboot into CWM – mount/system - Install from sdcard - choose zip from sdcard - flash "CM7DEFAULTSTYLES-Settings.zip”
- I want back CM9 ICS Style Settings
Reboot into CWM – mount/system - Install from sdcard - choose zip from sdcard - flash "FIXCM9STYLESETTINGS_FC.zip”
- Remove PDroid
Reboot into CWM – mount/system - Install from sdcard - choose zip from sdcard - flash "PDroid-RESTORE-TRANSX3.zip”
after reboot, remove "PDroid.apk" from /system/app
- Disable and enable journaling in internal ext4 Partitions
Reboot into CWM - Install from sdcard - choose zip from sdcard - flash JournalingDisabler.zip
(Disabled Journaling will improved performance, credit goes to skynet28) Pls download from skynet28's thread here.
HIGHTLY NOT RECOMMENDED RESTORING APPS VIA TITANIUM BACKUP, INSTALL YOUR FAVORITES APPS NORMALLY!
Standard Disclaimer:
I am not responsible for anything that happens to your phone, you flash things at your own risk!
Make full backup before do anything!
1. Solution when scroll through messages.. the background becomes white
Settings - Performance settings - Scrolling cache - tick "Force disable"
2. Fix Brightness modes force close when using CM9 Style Settings
Reboot into CWM – mount/system - Install from sdcard - choose zip from sdcard - flash "FIXCM9STYLESETTINGS_FC.zip”
Some Wallpapers I had used.
miracle edition with moded? mmmm ics again .
dredremon said:
miracle edition with moded? mmmm ics again .
Click to expand...
Click to collapse
NO!
New updated from vo-1 CM7.2.0-RC1-by-vo-1 update 14-05-2012
came from here.
well looks nice
I'm only trusting itasoulas modded CM7.2 from vo-1
xxfamasxx said:
I'm only trusting itasoulas modded CM7.2 from vo-1
Click to expand...
Click to collapse
nevermind.
why dont u try modding a rom wid evrything included?like for example the mosf indemand request is centerclock?
Sent from my GT-S5830 using XDA
Looks good but the ics theme is getting old please use another
downloading
I REALLY like this one looks beautiful!
If I am not wrong the 14-5-12 link from vo-1 is an an update version and not the full version. I may be wrong but the link clearly states "update" at the beginning. Rom size is also point to that direction as full vo-1's versions are normally over 90MB. So probably you based your rom on the update version (to be flashed over previous one) and not the full. I may be wrong again, but I doubt it!
itasoulas said:
If I am not wrong the 14-5-12 link from vo-1 is an an update version and not the full version. I may be wrong but the link clearly states "update" at the beginning. Rom size is also point to that direction as full vo-1's versions are normally over 90MB. So probably you based your rom on the update version (to be flashed over previous one) and not the full. I may be wrong again, but I doubt it!
Click to expand...
Click to collapse
Not sure, coz the site is in Russian. Google Translate can't help me more. I still searching changelog for this ROM.
"...states "update" at the beginning" filename start with "update" is same with official cyanogenmod's site & size arround 84mb.
vo-1 said:
I'm ok now. Changelog for 14.05: updated sources and nothing else.
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I like this rom because it has no tweaks. Anyone can put in it whatever it wants.
Good mods by the way .
Sent from my GT-S5830 using xda premium
What launcher does this ROM using ?
Mediafire links please. Never successfully downloaded any file from 4Shared
Chaitanya.Madduru said:
What launcher does this ROM using ?
Mediafire links please. Never successfully downloaded any file from 4Shared
Click to expand...
Click to collapse
Medifire link is already in first post
@tamingsari2k you must change the thread title when you update for us to know when you do it.
tamingsari2k said:
Transparent Messaging:
Reboot into CWM5 - Flash "MmsTransparent-4TransX.zip"
bug fix.
Click to expand...
Click to collapse
does this can be install just like that ? i am now using miracle v4...can i use with that...?
tamingsari2k said:
Transparent Messaging:
Reboot into CWM5 - Flash "MmsTransparent-4TransX.zip"
bug fix.
Click to expand...
Click to collapse
I still have the bug when scrolling.
CoCore-P Linux 2.6.35.x Kernel
( Posts )
1. Instructions & Installation
2. How to
3. Changelog & Downloads & Credits & Source
( Responsibility )
I'M IN NO WAY RESPONSIBLE OF ANY DAMAGE CAUSED BY USING THIS CUSTOM KERNEL.
PLEASE NOTE THAT SOME FEATURES CAN DAMAGE YOUR PHONE AND YOUR EAR.
Click to expand...
Click to collapse
( What is needed )
* Samsung GT-I9070P (Android 2.3.x)
* Some Android experience
* Know how to use Terminal
* More patience
( Features )
fs: CIFS module
mm: SLUB memory allocator
arm: ThumbEE
arm/vfp: Build with neon
arm/crypto: ARM AES and SHA-1 crypto
ab8500_asoc: Sound control
ab8500_chargalg: Real charged notification
net: More choices of TCP congestions
mali: L2 cache max reads 48kb
mali: Disable mali state tracking
block: 8 io schedulers
debug: Disable KGDB [Adi_Pat]
debug: Android logger as module (free 2mb RAM)
mxt224e: Sensitivity improved by defualt (fix touch responses)
bcmdhd: PM_FAST by default
kernel:Lzop compression
ramdisk: Lzop compression
ramdisk: Init.d scripts
ramdisk: TWRP Recovery 2.2 [diego-ch]
cpufreq: 16 cpu governors
cpuidle: Deeper sleep state
More details in changelog
( Installation )
[DD method]:
You need to root your phone first.
What is ROOT? HOW TO?
Google will answer you. :l
1. Download kernel zips from #3 post
2. Extract kernel.bin.md5 from zips
3. Copy kernel.bin.md5 to somewhere you like (e.g. /sdcard)
4. Open Terminal app,use these commands
Now lets go to superuser mode
su
Click to expand...
Click to collapse
Now lets flash(dd) kernel to kernel partition
dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15
Click to expand...
Click to collapse
5. Reboot to take effects
reboot
Click to expand...
Click to collapse
* If you type a wrong dd command,it might hard birck your phone
So please think twice before hit enter
* It is recommended that check the md5 of kernel.bin.md5
If it doesnt match 'md5.txt' in zips,dont flash to phone.
Please re-download zips
[TWRP method]:
If you dont have TWRP recovery,please flash kernel.bin.md5 first.
Press Vol.Up + Home + Power to go to cwm.
Then choost zips in external sdcard to flash.
How to check md5 on phone?
Open Terminal app (Please install busybox first )
'cd' to the folder(e.g. /sdcard) where has the file
cd /sdcard
Click to expand...
Click to collapse
Now get the md5
busybox md5sum -t kernel.bin.md5 >> out.txt
Click to expand...
Click to collapse
Now check the md5 manually
HOW TO
Here are some intructions/tips about how to play with the kernel.
Terminal is needed.
If you want to change the values,it needs su permission.
If you get 'Permisson denied',you need su permisson.
( Boot time )
How to check the boottime?
cat /d/boottime/summary
Click to expand...
Click to collapse
( CPU governors )
PERFORMANCE,POWERSAVE,USERSPACE,ONDEMAND
HOTPLUG,CONSERVATIVE,ONDEMANDX,LIONHEART
INTERACTIVEX,SMARTASS2,PEGASUSQ,LAGFREE
LAZY,INTERACTIVE,SKYWALKER,NIGHTMARE
Click to expand...
Click to collapse
* PegasusQ is taken from SiyahKernel (new version)
* To be honest,most of custom governors are based on ondemand/interactive
( IO schedulers )
SIO(2012),VR,BFQ(v5r1),CFQ,NOOP,ZEN,ROW(v4),Deadline
Click to expand...
Click to collapse
* Please choose them by yourself
( Deepest sleep state )
Stock deepest is 4.Now it is5 by default.
Deepest supported is 6.
To change:
echo 6 > /d/cpuidle/deepest_state
Click to expand...
Click to collapse
* PegasusQ works badly with 6
* OnDemand works well with 6
* Please note that it wont increase the using time but standby time.
To check the cpuidle state:
cat /d/cpuidle/stats
Click to expand...
Click to collapse
( Init.d script )
Please install busybox in system first
I recommend you install busybox via apps
Create a new folder named 'init.d' in /system/etc
Set the permisson of init.d foler to 0777(rwxrwxrwx) (at least has read and exec permission)
Set the owner to 0.0 (root root)
Put some scripts (any name you like) in init.d folder with permisson 0777 (rwxrwxrwx) (at least has read and exec permission)
Scripts with right permisson will be runned when system boots.
( Real charged notification )
Well,please let me call it notification.
To be honest,it needs to check manually.
cat /sys/module/abb_chargalg/parameters/eoc_status
Click to expand...
Click to collapse
* You can use Rootexplorer to view this file.
* When it says "First full charging reached",then the UI should show you charged 100%
But it is not the real full charged.
* When it says it is the real full charged,you can unplug the charger.
* When you are charging and do a reboot will reset the counter.
* According to my experiments,it needs 1-2 hours to charge to real full.
( Sound control )
Please note that listening to too high volume music over 1 hour can damage your ears.
Or makes your speaker/headset overload.
Volume control only can increase headset volume.
To enable: (default: disable) (0=disable 1=enable)
echo 1 > /sys/module/snd_soc_ab8500_audio/parameters/hsx_boost
Click to expand...
Click to collapse
[Advanced:]
To control the volume gain: (default: 0) (Volume: 0 > 34 > 68(stock) > 85)
echo xx > /sys/module/snd_soc_ab8500_audio/parameters/hsx_write
Click to expand...
Click to collapse
* Most values(except 0,34,68,85) will make the volume lost balance.
How do i check it shuts down?
dmesg | grep -i asoc
Click to expand...
Click to collapse
* Or read the parameters hsx_read in sysfs
If you get some msgs like "ANAGAIN3=85"(if hsx_read = 85),that means ab8500 asoc has been powered off.
( TCP congestions )
Supported:
cubic(default),westwood,highspeed,vegas,veno,yeah
Click to expand...
Click to collapse
To check all the available options:
busybox sysctl net.ipv4.tcp_available_congestion_control
Click to expand...
Click to collapse
To change to other option:
busybox sysctl -w net.ipv4.tcp_congestion_control=YOU_WANT_TO
Click to expand...
Click to collapse
#include
Latency - Download - Upload
cubic:
1st run: 15ms - 10,75Mbps - 7,82Mbps
2nd run: 14ms - 10,84Mbps - 8,06Mbps
westwood:
1st run: 11ms - 17,65Mbps - 8,30Mbps
2nd run: 13ms - 13,28Mbps - 8,29Mbps
highspeed:
1st run: 13ms - 10,76Mbps - 7,94Mbps
2nd run: 16ms - 14,42Mbps - 8,52Mbps
vegas:
1st run: 14ms - 8,49Mbps - 6,62Mbps
2nd run: 14ms - 12,00Mbps - 7,07Mbps
veno:
1st run: 13ms - 9,58Mbps - 8,13Mbps
2nd run: 13ms - 8,50Mbps - 7,64Mbps
yeah:
1st run: 14ms - 13,37Mbps - 8,28Mbps
2nd run: 17ms - 13,89Mbps - 8,14Mbps
Click to expand...
Click to collapse
( Service Mode )
In dialer, type:
Secret code:*#197328640*# (service mode)
Secret code:*#9900*# (SysDump)
In SysDump:
Disable fastdormancy might help 3G standby time (Depends on your mobile base station)
* Google to learn more
RAM DUMP is a debugger.Most of us wont use it.So disable it. (Tap it,every tap will make a reboot,until it shows you "Disable....",then tap disable,it is disabled)
* Google to learn more about secret code
Almost tweaks will be restored to default after reboots.
So you can make your tweaks as init.d scripts to apply them when boots. :laugh::laugh::laugh:
Downloads & Source & Credits
( ChangeLog )
2013-02-22
defconfig:bump version 1.0
logger:make as module
2013-02-21
defconfig:bump version 0.9
defconfig:enable pn544 config
defconfig:disable mismatch checking
board-janice:increase touchscreen sensitivity
(fix sensitivity issuse)
rcu:enable fast nohz rcu
arm:enable thumbee
arm:build vfp with neon+hardfloat
net:enable advanced tcp configs
mm:slab -> slub
mali:disable mali state tracking
mali:mali l2 max reads 28kb -> 48kb
block:add bfq io scheduler
block:add zen io scheduler
block:add sio io scheduler
block:add vr io scheduler
blcok:add as io scheduler
sched:add nr_running symbol
cpuidle:deepest state 5 -> 4
cpufreq:merge governors from mini
cpufreq:update pegasusq governor
cpufreq:add nightmare governor
cpufreq:add hotplug governor
bcm4330: pm_max -> pm_fast
arm: patch arm crypto
arm: patch ezekeel resem
ab8500-asoc: patch sound control
ab8500-chargalg: patch real full charged notification
debug:disable kgdb
2013-02-17
defconfig: add CoCore-P config
defconfig:fix configs
drivers:fix ISSP clean error
drivers:add samsung drivers
drivers:add pn544 driver
board:add nfc i2c pdata
board:enable nfc gpios
timer:add usleep range
arch:add um arch folder
Click to expand...
Click to collapse
( Downloads )
Check the ATTCHMENTS
( Source )
Github: https://github.com/cocafe/i9070_kernel_CoCore-P
( Credits [a-z] )
Adi_Pat for helping the kernel and patches&hints!!!
CallMeVentus for patience tests and his I9070P!!!!!
diego-ch for TWRP!!!!
hafidzduddin for helping the kernel and great hints!!
Samsung for kernel source :/
P.S
I am sorry that i dont own this device,so it is not convenient for me to dev.
CallMeVentus will continue my works
Enjoy!! :laugh::laugh::laugh:
Boy Boy you are P user Hero now.....
Rooted firmware for 9070P users :
https://hotfile.com/dl/183517897/ebff311/I9070PXXLD2_I9070POJVLD1_TUR_ROOTED_SUPERSU.rar.html
Finally don't forget install the latest busybox binary :
https://play.google.com/store/apps/...m_medium=organic&utm_term=busybox+google+play
BusyBox
I never installed BusyBox. But when opening SD Maid, I see "BusyBox Version: BusyBox v1.19.3-sdm208". I assume BB came from Super SU? Do I still need to do a separate install of BusyBox?
MrTooPhone said:
I never installed BusyBox. But when opening SD Maid, I see "BusyBox Version: BusyBox v1.19.3-sdm208". I assume BB came from Super SU? Do I still need to do a separate install of BusyBox?
Click to expand...
Click to collapse
It is integrated for SD Maid, it is not for other stuff - just for SD Maid.
shut_down said:
It is integrated for SD Maid, it is not for other stuff - just for SD Maid.
Click to expand...
Click to collapse
Thanks. So I should install BB.
MrTooPhone said:
I never installed BusyBox. But when opening SD Maid, I see "BusyBox Version: BusyBox v1.19.3-sdm208". I assume BB came from Super SU? Do I still need to do a separate install of BusyBox?
Click to expand...
Click to collapse
SD Maid including busybox her body :silly: like titanium backup, you have to install from Busybox app, BB is important solution for unix-base systems if you have a rooted device ; one day you're gonna need it. :good:
Odp: [Kernel][02/22/2013] CoCore-P 1.0
I use dd method. Everything work fine. Installed 10 minuts ago
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GT-I9070P®land
shut_down said:
It is integrated for SD Maid, it is not for other stuff - just for SD Maid.
Click to expand...
Click to collapse
SD Maid's BusyBox must be used by other apps. After installing BusyBox, Universal Kernal Flasher stopped working and gave an error that BusyBox bin could not be found. I got UKF to work again by wiping data/uninstalling/re-installing. All is good now.
Odp: [Kernel][02/22/2013] CoCore-P 1.0
hello. I am using this kernel all day. so far everything is working very well. I do not use nfc so I do not know if it works. thanks a lot
GT-I9070P®land
qbastrzem said:
hello. I am using this kernel all day. so far everything is working very well. I do not use nfc so I do not know if it works. thanks a lot
GT-I9070P®land
Click to expand...
Click to collapse
NFC works , don't worry
"Viper kills.....again!"
R: [Kernel][02/22/2013] CoCore-P 1.0
I test it from 3 days and I can say this kernel is very good in performance and in battery life (I have played with governor and scheduler)
Good job friends!
A Big tanks to Cocafe and callmeventus! :beer:
______________________
Inviato dal mio GT-I9070P CoCore-P-0.9 Kernel
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
just installed the 1.0P to my wife's phone - never seen soooo smooooooth gingerbread phone before, wow! thanks a lot!
shut_down said:
It is integrated for SD Maid, it is not for other stuff - just for SD Maid.
Click to expand...
Click to collapse
100% correct .
MrTooPhone said:
SD Maid's BusyBox must be used by other apps. After installing BusyBox, Universal Kernal Flasher stopped working and gave an error that BusyBox bin could not be found. I got UKF to work again by wiping data/uninstalling/re-installing. All is good now.
Click to expand...
Click to collapse
SD Maids busybox is located at /data/data/eu.thedarken.sdm/files/busybox
It is very unlikely that other apps use it. They could if they want, but why would they?
Also it is not a full busybox, it just contains a set of applets necessary for SD Maid to work.
Dark3n said:
100% correct .
SD Maids busybox is located at /data/data/eu.thedarken.sdm/files/busybox
It is very unlikely that other apps use it. They could if they want, but why would they?
Also it is not a full busybox, it just contains a set of applets necessary for SD Maid to work.
Click to expand...
Click to collapse
I don't have BusyBox app installed, But when I run Root Validator, it says BusyBox binary is at /system/bin/busybox. See attached. I have SD Maid installed. Maybe BB came in with my rooted FW found at "http://forum.xda-developers.com/showthread.php?t=1985199"
purplepizza said:
I don't have BusyBox app installed, But when I run Root Validator, it says BusyBox binary is at /system/bin/busybox. See attached. I have SD Maid installed. Maybe BB came in with my rooted FW found at "http://forum.xda-developers.com/showthread.php?t=1985199"
Click to expand...
Click to collapse
You could prehaps try using Busybox installer to overwrite that busybox it worked for me in such a situation before
Odp: [Kernel][02/22/2013] CoCore-P 1.0
hello. at last we have a working kernel (thank you very much to all involved) can I install a custom ROM?
GT-I9070P®land
qbastrzem said:
hello. at last we have a working kernel (thank you very much to all involved) can I install a custom ROM?
GT-I9070P®land
Click to expand...
Click to collapse
I dont know but you can try
Try:
Flash the ROMs
Flash kernel
If you get Unknown Baseband
Flash modem via Odin
Check the cpu load...(if it goes high then the ROM is incompatible)
Please report back
Sent from my GT-I9070 using xda premium
Introduction :
Under the request of some friends of mine, I decided after some time of write, to release this script for public testing.
This package of binaries, scripts and libraries, will fix the lags on your Android smartphone or tablet, and make it smoother and faster!
Features and Improvements :
- Full memory management with 5 different configs.
- Zipalign apps in "/system" at every boot, and apps in "/data" every 48 hours.
- CPU governors tweaks and improvements for better performance and battery life.
- Increased SD Card read-ahead cache to 2048 KB to improve SDCard write/read speed.
- Nos entropy seeder generator engine used to reduce lags.
- Ad blocking.
- Battery life improvements.
- SQLite and database optimizing every 48 hours.
- Network TCP tweaks.
- Kernel, VM and sysctl tweaks and improvements.
- File system speedup.
- Build.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life!
Requirements :
- Android 2.3.x (Gingerbread) and higher.
- Kernel with init.d support.
- Root.
- ClockworkMod. (4 or higher)
- At least 4 MB of free space in "/system".
How to install :
1. Download the flashable zip.
2. Rebooting into recovery mode.
3. Install Fly-On RAM manager. (optional)
4. Install Signed_Fly-On_Mod_V3.0.zip stock or CM according to your ROM.
5. Reboot and feel the smoothness!
In the package :
+/etc/init.d/ scripts :
-ram_manager: It's a complete memory manager, with 5 different versions.
-02logdelete1: Cleans log files and tombstones at every boot.
-09sdcardspeedfix: Set SDCard readahead speed to 2048 KB.
-darky_zipalign: Zipalign apps in "/system" at every booting.
-zipaligndata: Zipalign apps in "/data" every 48 hours.
-98fly_core: Contains various tweaks and improvements. (3G/VM/sysctl/kernel/battery life tweaks etc.)
-sqlite_optimize: Optimizing database of apps every 48 hours.
-s78sensitive_touchscreen: Improves the sensivity of your touchscreen.
+/system/xbin/ :
-sqlite3
-zipalign
-Openvpn
+/system/lib/
-libncurses.so (Stock version only).
Compatibility :
- This package will work with all android devices that have init.d support!
- Fly-On Mod works with Gingerbread, Ice Cream Sandwich, Jelly Bean, but in Ice Cream Sandwich and Jelly Bean ADJ Values are hard coded into the services.jar or .odex, that's why for Ice Cream Sandwich and Jelly Bean you will need a patched services.jar, you can follow this great guide by zeppelinrox (thanks to him): Click here.
- You can also use Fly-On Mod with V6 SuperCharger. (If you didn't flash the ram_manager config)
- The ram_manager configs are for phones with 512MB RAM. (Lower and higher than that too)
- If you have 1024MB/2048MB RAM use supercharger instead!
Important informations :
About RAM managers :
+ Balanced version, is for people with moderate apps use.
+ Gamers version, is for people playing HD/3D games.
+ Multitasking version, is for people that use a lot of apps at the same time.
+ Hard multitasking version, is for people with huge amount of apps running at the same time. (Very agressive values!)
+ Nexus version, contains values from Google source used in nexus devices.
Note also that:
- Multitasking version have lesser free ram than Balanced/Gamers/Nexus, but this thing doesn't mean they are the best, choose the ram config according to your use!
- Don't use any Task Killer with this Mod!
- Fly-On Mod main package comes with 2 different versions, CM version is for CyanogenMod ROMS and AOSP based ROMS (like AOKP), then stock version is for stock ROMS and custom ROMS based on stock!
- If you have bad battery life the problem is from an app waking your phone from sleep, it's not my script!
- Don't use Fly-On Mod with any other tweaking script as they will conflict!
- If you want to use Fly-On Mod in your ROM or your Mod ask for permissions first and give me credits!
- If you have any question ask me in the thread instead of PMs or I will not reply!
- Read well the thread before posting any newbie questions and do not ask for an already answered question!
Some users feedback :
l0lh4rd said:
The script is great!!!!!!!!!! Really feeling comfortable at 312MHz-156MHz/Smartass V2/noop, which under these settings without the scripts would make me miserable
Click to expand...
Click to collapse
ronnieryan said:
Version 8 has awesome boot time, only 38 seconds for me
Click to expand...
Click to collapse
KnightlyNinja said:
this version is awesome. ram usage is very low 150 mb only.Superb work haha:victory::silly:
Click to expand...
Click to collapse
KnightlyNinja said:
great. this is one of the best tweak available in xda. it improves smoothness , battery and performance. Almost does the work of a good kernel. Hoping to see more improvements in future.
great work sir.
Click to expand...
Click to collapse
sad25kag said:
╔╦╦╦═╦╦╦╗╔╦╦╗
║║║║║║║║║║║║║
║║║║║║║║║╠╬╬╣
╚══╩═╩══╝╚╩╩╝
Working great and faster on MIUI rom.
░░░░░░░░░░░░▄▄
░░░░░░░░░░░█░░█
░░░░░░░░░░░█░░█
░░░░░░░░░░█░░░█
░░░░░░░░░█░░░░█
██████▄▄█░░░░░██████▄
▓▓▓▓▓▓█░░░░░░░░░░░░░░█
▓▓▓▓▓▓█░░░░░░░░░░░░███
▓▓▓▓▓▓█░░░░░░░░░░░░░░█
▓▓▓▓▓▓█░░░░░░░░░░░░███
▓▓▓▓▓▓@░░░░░█
▓▓▓▓▓▓█████░░░░░░░░██
█████▀░░░░▀▀███████
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
Chemical SidePearl said:
@slaid480
Here is a talking sentence between me and my friend that is watching my phone flying with cm10.1....
Friend: Have you ever heard the definition of INSANITY ???
Me:Yup,it's the new Fly-ON mod by @slaid480.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
pykfree said:
I put this script in PAC 4.2.2 ROM.. working fine.. it give more performance on my phone.. thank's dude
Click to expand...
Click to collapse
tcris45 said:
Ty man for those awesome tweaks
Click to expand...
Click to collapse
golfgtiedition30 said:
Instaled on rom stocklite v8...no problems its working well :thumbup:
Click to expand...
Click to collapse
nizar.nasani said:
well i test it on the last cm10.1 by biel after new flashing today and still for now no problems and works perfect and thnx btw
Click to expand...
Click to collapse
Credits:
-Thanks to Darky for the base zipalign script.
-Special thank to pikachu01, zacharias.maladroit,collin_ph and juwe11!
-Big thank to zeppelinrox and Exit_Only !
-voku1987 and mcbyte_it.
-My Friend Maroc-OS For the big Help!
-Any XDA Member That helped Me out in This Project!
-Google!
If you liked this mod,please rate this thread to 5 stars and press the Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep this project up to date!
This Thread is reserved for sharing information about Scripts in Android and how they Tweak the Android system through the Linux kernel and what are requirements of Running Scripts correctly!
Main Goal of Scripts:
Well,Scripts Has a lot of Goals,Such as optimizing,improving and in Some Lines we can say,Scripts can:
-Improve Performance and GUI Smoothness
-Improve Battery Life
-Tweak and Optimize the Android engine!
Requirements of using Some Scripts:
Since Android is Based on Linux,there is a possibility to use Linux Scripts to attempt the Goals Listed before in the thread,and like any Tweak you want to Apply there is some requirements you need to Use correctly those Scripts and some of the mportanst are :
-Custom Kernel that support init.d(Custom Kernel=Modified Linux kernel,for example in GALAXY ACE Forums here we have:CF-Root-All CM kernels,etc...)
-Having ClockWorkMod 5 or above to Flash Scripts
-at Least 2 MB free in /system
-Root Access(BusyBox should be included)
Useful Info About Tweaks:
-LMK(LowMemoryKiller):
The LowMemoryKiller is a constant debate between more free RAM and more multitasking capabilities as free RAM (more than 60MB free) is actually wasted RAM.
The LowMemoryKiller is actually a feature in the Android OS for better memory management.
This is an important feature due to the perennial problem of having low free memory causing lagginess and slowness in launching apps. When you have free memory lingering around the number of 40MB or less, the Android OS just lags like hell.
What this would mean is, you would want to tweak the LMK to not have the situation of it having less than 40MB (or even close to that).
The modern Linux machine in the Android ecosystem relies on a mechanism called Low Memory Killer (LMK) to consistently free up RAM. This is due to Android's internal mechanism of caching apps (and never fully exiting them) when you press the back button. This is to enable faster app switching and provide a seamless experience for apps usage model. Android also, by itself will also constantly look for often used apps to cache them for faster app opening. This will happen even before your system fully boots.
Now, when you mention LMK, the most obvious thoughts that come up are minfrees and Out Of Memory (OOM) groupings. Yes, those two are integral parts when it comes to LMK. The issue here is that no one actually mentioned that there are two LMK systems in Android, that being:
- Linux LMK
- Android Dalvik VM LMK
Journaling/Barriers:
This has been a touchy subject here in XDA for most people who debate about it. Most recently,Some Scripts included a way to disable journaling on these partitions:
/system (System is read only, it's safe to remove journaling. However, you will not see speed increase by removing it as you're not writing onto /system 99.99% of the time unless you're using Titanium backup to remove system apps or copying init.d scripts to it)
/cache (Cache can be rebuilt on the fly. Data corruption on it is not game breaking)
/data (All of your data on your phone is here. Removing journaling can risk data corruption. Read more below)
On whether we need journaling or not, I will pose this situation:
Journaling is required to maintain data consistency in events that could lead to data corruption. Data could get corrupted in a number of situations:
- Misbehaving app that constantly writes without syncing/committing data to the disk
- Power loss due to forced reboots or bootloops when data is partially written/committed into disk
Memory Leaks
If you found out that your Android is laggy after sometime and a reboot will make it faster, then you're experiencing memory leaks. "free" is a command to show your currently free memory. It will not necessarily be the same value as your phone's free memory.
Busybox
Well,Busybox is required to perform all of your superuser activities in your android phone. There are some problems associated with this when ROM developers decide to use a certain version of Busybox that are incompatible with the binaries that we use in our phones. When you found out that after changing your kernel/ROM:
- You still have superuser and Titanium Backup still works but, Root Explorer/File Expert can't copy files correctly to the /system after mounting R/W!!
MinFree:
Minfree is part of the Kernel (present on both Gingerbread and Ice Cream Sandwich) and It an Option available in Linux kernel Optimized for Android to Improve MultiTasking and It differs from a Phone to another because of the RAM available in users space.
The Minfree is hopefully adjustable Like the LMK to optimize Multitasking to a lot of options(like:aggressive,gaming,balanced,etc...)
The Minfree Option can be Found as a part of Linux Scripts for better RAM management!
Network Tweaks:
Well,in Linux Scripts for Android you can find some Tweaks that increase the speed of you Network Download/Upload and those with various types of Netwoks Like 3G,Wi-Fi,etc...
Build.Prop Tweaks
Well,those Tweaks can generally be found in Build.prop in /system and they are for various improvements Such as allowing Phone to Sleep better,changing wi-fi scan interval,changing window animation delay,some network Tweaks,possibility to change density,etc...
SD Card Speed Fix:
This is a Tweaks that Has the goal of increasing the read-ahead speed of your SD Card,and that by changing the valories of SD card readahead Like:
-256kb
-512kb
-2048kb
-4096kb
Smoothness Tweaks
Well with the Linux Kernel there is a possibility to add some Tweaks to the Linux scripts and those to optimize the GUI Smoothness and also Lock Home launcher in Memory!!
Credits:
Well,what I can say is that I shared those useful Info after some research and my experience with Linux/Unix,and those some of My main Target that I use to find some of the useful info:
-XDA Forums
-Goolge
Change Log:
Fly-On V0.1:(8/4/2013)
initial release.
Fly-On V0.2:(16/4/2013)
-re-writed and cleaned script.
-New zip-aligning script based on Darky's zip-aligning script.
-Adjusted Values to be adapted to this device hardware.
-Deleted touch sensitivity tweaks(useless).
-Corrected Min-free values.
-Many other minor stuff...
Fly-On V0.3:(17/4/2013)
(If you are coming from an old version,below V0.3 you will need to delete all scripts in your /system/etc/init.d folder)
Now Fly-On Mod is a full package of scripts:
-Replaced the main Fly-On script with 3 scripts to avoid any functionality problem and ensure more stability (S98system_tweak,05LagFixer,09sdcardspeedfix)
-Added some useful build.prop Tweaks(for better performance and battery life)
-Fixed the Low memory killer bug with the new Lagfixer script.
Fly-On V0.4:(17/4/2013)
-New SQlite_optimize script .
-New Script For Network TCP optimizations.
-Adjusted Min-Free Values for better Multitasking!
Fly-On V0.5:(19/4/2013)
-Fixed permissions Via Updater-script to Make sure that scripts are properly working!
-Some cleaning to the S98system_tweak script!
Fly-On V0.6:(20/4/2013)
Delete all old Fly-On scripts before installing V0.6!
this update contains various improvements bugfixes and changes with a full new script:
-Deleted 05Lag_fixer script!
-Deleted S97network_tweaks!
-New 08Fly_engine script with a lot of tweaks and improvements:
+Full Memory management
+Sysctl tweaks
+Kernel and VM tweaks
+File system speedUp
+Ext4 tweaks
+Improved Wifi_Idle for better battery Life!
-Updated zip-aligning script for faster zip-aligning and short boot time!
Fly-On V0.7:(21/4/2013)
-added xbin to make sure that zipalign and fly_engine scripts are working properly!
-Now with two versions:
+Stock version for Stock gingerbread samsung roms and roms based on samsung roms!
+CM version for cyanogenmod7/9/10 Based roms and AOSP GB/ICS/JB roms too!
Fly-On V0.8:(22/4/2013)
-Fixed errors on Fly_engine script.
-Added I/O scheduler tweaks.
Fly-On V0.9:(25/4/2013)
-Fixed sqlite3 bin permissions.
-Removed journalism on EXT4 partition(greatly increase I/O).
-added remountCM_fullext4 script for CM version.
Fly-On V1.0:(27/4/2013)
If you are coming from Fly-On V0.9 there is no need to delete the old scripts!
-deleted fly_engine script(contain a lot of errors,I will be working on rewriting it).
-added a new ram_manager script (Full memory fix and management).
-fixed proper permissions for all scripts.
Fly-On V1.1(29/4/2013)
-Deleted swapon tweak as it's only causing troubles!
-heavily modified updater-script to make the /system/etc/init.d folder clean while installing the Mod!(there is no longer need to delete scripts manually)
Fly-On V1.2(2/5/2013)
-added new script 02logdelete1 to delete logs+tombstones!Huge thank to -CALIBAN666- for the idea and the big help!
-updated the updater-script with more scripts to delete in init.d folder
-Fly-on mod is now more stable than before!
Fly-On V1.3(3/5/2013)
-Fixed sdcard readahead speed(need some testing)
-Under the request of some users the ram_manager script is now separated from the CWM flashable zip and It has it's own CWM package!
-Under the request of some users the ram_manager script is now with two version : one for multitasking and the other one for hard gamers!
-Some cleaning to the 98system_tweaks script(deleted unseful stuff)
Fly-On V1.4:(7/5/2013)
-New Ram manager config(Balanced)for people with moderate apps use!
-Tried to fix deletelog script(I'm not sure need testing)
Fly-On V1.5:(9/5/2013)
-Fully Re-writed Fly_engine script ensuring maximum compatibility with:
+I/O scheduler tweaks(choose noop for maximum compatibility).
+File system speedup.
+Various sysctl tweaks - Kernel, VM, file system!
Fly-On V1.6:(10/5/2013)
-Fixed Bug with 02logdelete1 script,thanks to -CALIBAN666- !
-Renamed 085Fly_engine to Fly_engine to provide any invalid argument!
-Added Openvpn binary.
-Some minor fixes to the Fly_engine script.
Fly-On V1.7:(11/5/2013)
-Updated 02logdelete1 script with new features and improvements thanks to : -CALIBAN666- .
-Added Default.prop which contains Extra fly_engine tweaks!
-Deleted some tweaks from Fly_engine script(the ones that could conflict with 98system_tweak script).
-Fixed proper Fly_engine script permissions through the Updater-script.
Fly-On V1.8(12/5/2013)
-New RAM manager config(Nexus)It's the original Google config!
-Updated sqlite3 binary
-Modified the CWM installation package to make It detect your android version and install the binaries according to it!
Fly-On V1.9:(13/5/2013)
-Modified Fly_engine script with some tweaks added:
+tune2fs feature(Disable journalism).
+Disabled normalize sleeper.
+Deleted I/O specific tweak for noop I/O scheduler.(Feel free to use any scheduler with Fly-On)
Fly-On V2.0:(15/5/2013)
-Added new RAM manager(hard multitasking)!
-Added new script to improve your touchscreen sensitivity !
-Delete 02deletelog1 for know(will be back after fixing bugs on It).
-Now you can install It over adrenaline engine/velocity directly(Edited CWM installation script).
-Fixed a small error in 98system_tweak script.
Fly-On V2.1:(17/5/2013)
-Fully reworked 98system_tweak script with:
+Lesser script size(from 23kb to 19kb).
+ Edited many values for more smoothness and better battery life.
-Some few modifications to the Fly_engine script.
-Added many info to the first post!
Fly-On V2.2:(18/5/2013)
-02logdelete script is back and it's working properly!
-Fixed a small error in 98system_tweak.
-Reduced 98system_tweak size from 19KB to 17KB.
Fly-On V2.3:(20/5/2013)
-Heavily Edited 98system_tweak with:
+New governor Tweaks!
+Edited many values for better performance/battery life.
+Deleted few lines that are causing issue on some phones!
Fly-On V2.4:(23/5/2013)
-Fixed 02logdelete1 script!Now It's working properly thanks to :vampire: !
-New script 98fly_core It's the fusion of 98system_tweak and Fly_engine scripts(to avoid any incompatibility/stability issues).
-Removed "Disable EXT4 journalism" feature as It's incompatible with many devices that runs a system partition other than ETX4.
Fly-On V2.5:(27/5/2013)
-Fully reworked 09sdcardspeedfix script(reduced size from 3Kb to 1Kb).
-Some cleaning to the zipalign script.
Fly-On V2.6:(31/5/2013)
-Cleaned up 98Fly_core script.
-Some misc changes to the sqlite_optimize script.
Fly-On V2.7:(1/6/2013)
-Reverted back to old 09sdcardspeedfix script(compatible with more devices).
-Fixed a small bug with the 98fly_core script.
-Deleted s78sensitive_touchscreen script for now.
Fly-On V2.8:(2/6/2013)
-New zipalign data script used to zipalign apps on /data at every 48H.
-New sqlite optimizing system at every 48H.
-Deleted remountCM_fullext4 from CM version (another step to make Fly-On more universal).
Fly-On V3.0:(5/6/2013)
-fixed a small issue in 98fly_core script.
-Reworked the 02logdelete1 script.
-Reworked zipaligndata script.
-Reverted back to old sqlite optimizing script.
-Added partition remount tweaks for I9300 in a single package.
-Added Fly-on uninstaller for Version 2.4+ .
Fly-On V3.0 RC0:(9/6/2013)
-Added NOS entropy seeder generator engine,big thank to Exit_Only.
-Added hosts file for ad blocking.
-Fixed uninstaller(no more need to mount /system).
Fly-On V3.0 RC1:(18/06/2013)
-Added NOS entropy init.d script with light/moderate/aggressive profiles and sets moderate by defaults thanks again to EXIT_ONLY !
-Added new 99logdelete script to execute 02logdelete1 script properly at boot thanks to Erikeleria!
-Many minor changes.
reserved
Awesome to see you back Slaid! This script ought to be great!
PulseDroid said:
Awesome to see you back Slaid! This script ought to be great!
Click to expand...
Click to collapse
Thank you for the support !
Testing!!!!
I am testing ur scripts on ULTIMATUM ROM by following your instructions and removing all default scripts of /system/etc/init.d
and now its not booting
might be because it has int2ext
so it obviously wont boot
Sent from my S500 using xda app-developers app
Dont use too many script ..just check the init.d folder there are already plenty of scripts in there ...
Sent from my GT-S5830 using xda app-developers app
It works with int2ext?
Compatibility:
Fly-On Mod works with GB/ICS/JB But in ICS/JB Min-free and LowMemoryKiller options are not working,because in ICS/JB android OS set Min-free/LMK values to the default after Booting,so 05Lagfixer script will not work for ICS/JB.
Click to expand...
Click to collapse
Too bad, on JB this script (fly on mod) has very little impact !
denis022 said:
Too bad, on JB this script (fly on mod) has very little impact !
Click to expand...
Click to collapse
If you want total effect on ICS/JB you will need to patch services.jar like mentionned in SuperchargerV6 !
My battery life boosted like hell
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-S5830 using xda premium
Jpbest said:
It works with int2ext?
Click to expand...
Click to collapse
Delete all the others files in ini folder and leave the int2ext then flash this one it will boot for sure. Im testing at the moment and using int2ext also.
Fly-On v0.6 is Up
V0.6 is now Up with various changes and fixes check It out!!!!
slaid480 said:
V0.6 is now Up with various changes and fixes check It out!!!!
Click to expand...
Click to collapse
Oh, man..I think I gonna kill you Just now I reflashed ROM and restore all backups and settings, because when I installed script, then something bad happend to link2sd and now I have to do it again, because I damn want this new version... D'oh!
Thanks for your work man
after flashing new rom
i get
"error in /sdcard/Fly-On_Mod_V0.6_Slaid480.zip
installation aborted"
Hany Ibrahim said:
after flashing new rom
i get
"error in /sdcard/Fly-On_Mod_V0.6_Slaid480.zip
installation aborted"
Click to expand...
Click to collapse
Ok let me check if there is an error in the updater script
Edit:error confirmed and new file uploaded!
Sent from my GT-I9000 using xda premium
slaid480 said:
Ok let me check if there is an error in the updater script
Edit:error confirmed and new file uploaded!
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
working perfect
Hany Ibrahim said:
working perfect
Click to expand...
Click to collapse
That's It thanks for reporting the updater script error!