Tether on Quarx's 7.1-11 rebooting defy - Defy Q&A, Help & Troubleshooting

As the title says, if I try to enable USB or Wifi tethering on Quarx's 7.1-11 it won't work and at some point the phone reboots (to cyanogen mod logo, not the wasp screen).
I tried on Ubuntu who sees a connection but loops trying to connect without success, and Win 7 x64 who sees and install the adapter but can't connect through it. In both cases after a few minutes the phone reboots.
Wifi tether won't start and reboots the phone too.
Googled around to find an answer but didn't find anything helpfull.
It works with some wifi tether with an app from the market, but I would really have liked to get USB or at least default Wifi tether working rather than relying on an app, and I'm reading that it seems to work for most people so I wonder if my carier (Orange France) didn't sell me a phone where they disabled tethering at hardware level, would it be possible?
My phone has a green lense in case it could help find an answer.

Related

Wifi tether issues using SR 2.0

Been having issues all along getting wifi tethering to work properly, I've had success sharing the connection over USB, I don't care if it gives me a single user tether or an mobile wifi hotspot, I just need it to connect with my lenovo x201.
It's a rooted incredible with the latest build of skyraider, I did the leaked OTA radio update to get that, which I assumed would fix this issue... guess not!
The laptop recognizes the network, but is now getting stuck at identifying, sometimes it will get an IP address assigned but will display no internet access (this is windows 7 ultimate)
Anyone else able to replicate this issue or know of a potential fix? I've tried several of the solutions for other wifi problems I found around the web and here (where applicable)

USB Tether freezes (unstable) every few minutes

I know this has been discussed multiple times and we ended the discussion by suggesting to use Mobile AP (WiFi Tether).
However, I defer from the above workaround which works great for me as well due to:
1. Using WiFi Tether unnecessarily increases the phone and battery temperature and can reduce the phone's life
2. I still end up connecting the phone through USB to keep it charging while consuming a lot of energy while doing WiFi Tether. If that is so, I would rather switch off Mobile AP and WiFi on my Laptop and use USB tether instead. Consumes much less power and reduces the network latency and could be faster than Mobile AP
3. Froyo builds usually allow upto 5 WiFi clients to be connected to the phone sharing the 3G connection (which is much better in my location than any other broadband format including ADSL!). Using USB tether on one workstation (like my desktop) I could share it on upto 7 devices (including phone and my desktop)
4. As an ambitious campaigner, I may want to use WiFi on my phone for one purpose, probably for using DLNA and 3G to tether internet connection on a PC! This may not be possible if I use Mobile AP as it will use the WiFi radio.
If this feature is "OFFICIALLY" provided by Samsung on their "released" builds, why is it so unstable??? I would rather like to get this working rather than we looking for a workaround like using Mobile AP which is best used when really needed.
I would like to use this phone sometimes 24x7 downloading huge stuffs and it will waste the phone if I only rely on Mobile AP keeping the phone HOT all the time.
I have observed the following while doing USB Tether:
a) Problem exist on all test and released 2.x firmwares including the latest Froyo JPK.
b) Indications are same when using "PC Internet" option which creates a "hidden" network connection with the PC when USB connected with the phone and "USB Tethering" box under "Tethering" option in "Settings" Page.
c) While the phone shows that it is tethering normally, somehow the PC "FREEZES" the "TCP/IP" Stack as pinging its own IP FREEZES the ping command. All the network monitoring applications also freeze during this time. This is a very strange behavior I observed during the initial days of Windows 9x when you had to restart the TCP/IP stack.
Infact this issue looks very unique as even in Windows 9x, I never saw the Network apps freezing like this. Resetting the connection fixes the problem and it cycles the same way after that.
I have tested this behavior on 3 workstations:
A] My Official Laptop running Windows XP SP3 with all recent updates and Norton Internet Security Corporate Edition (firewall gives access to the network)
B] My Home Laptop running Windows 7 Professional with latest updates and Kaspersky Internet Security 201x (recently updated 2010 to 2011 - firewall gives access to the network)
C] My Home Desktop dual booting Windows 7 Ultimate AND XP SP3 with latest updates and Kaspersky Internet Security 201x (recently updated 2010 to 2011 - firewall gives access to the network)
All the above workstations have the same issue pointing the issue to be on the phone hardware or software or USB cable (tried 3 MicroUSB cables including the official provided by Samsung).
I have been troubleshooting this issue in the last 3 months, could not identify other issue than seeing the workstation freezing the network activities quite strangely as suggested above. Any help by my fellow SGS users, developers, moderators will be highly appreciated.
Thanks for your participation, lets team up and contact Samsung to resolve this issue if it bothers many people like me.
EDIT: I would try to keep this post updated with usable comments/suggestions/workaround as we discuss
Bump.. Appreciate your help.
Seems noone's using this feature which is VERY important to me. Can anyone help or should I contact Samsung to get this BUG fixed which exists on every firmware I have tried till date.
No tethering problems here. Maybe your device is just faulty?
Sent from my GT-I9000 using XDA App
Hi,
i've searched all the internet for resolution for that and nothing.
Weird thing is that connection was working good on 2.1 and also on 2.2 and then stopped working just like that (1-10 minutes of connection and then dc for like 5-30 seconds)
Tried almost all apps on market which didn't help me. Now i am trying PDAnet which is working well for about 40 minutes now. I had some troubles installing it but finally did it with USB drivers delivered with PC program of PDAnet. Wifi 5mb/s download speed and just slight ping increase but i am far away from AP so that's the problem i think.
However if someone know if it's system problem (running win7 prof. sp1) or any 3rd party software it will be nice to get working again on standard tethering provided on i9000 as it doesnt require any 3rd party software on PC to get it working.
If dc's again come i'll post info.
kstepyra said:
Hi,
i've searched all the internet for resolution for that and nothing.
Weird thing is that connection was working good on 2.1 and also on 2.2 and then stopped working just like that (1-10 minutes of connection and then dc for like 5-30 seconds)
Tried almost all apps on market which didn't help me. Now i am trying PDAnet which is working well for about 40 minutes now. I had some troubles installing it but finally did it with USB drivers delivered with PC program of PDAnet. Wifi 5mb/s download speed and just slight ping increase but i am far away from AP so that's the problem i think.
However if someone know if it's system problem (running win7 prof. sp1) or any 3rd party software it will be nice to get working again on standard tethering provided on i9000 as it doesnt require any 3rd party software on PC to get it working.
If dc's again come i'll post info.
Click to expand...
Click to collapse
I'm assuming that all your PC drivers are uptodate? According to me, it's a PC issue more than a phone one (check your PC logs & Firewall logs)
I have turned everything off (firewall, antiviruses etc.) and no changes. PDAnet is working well and as i saw it's .800 version of the usb driver, but new KIES installs .2000 one. Had problems with .2000 as PDAnet says i don't have usb drivers installed Uninstalled KIES one and installed .800, then PDAnet installed well. However - this program was only one solution to work. I have to try normal tethering on XP and clean win7 on laptop soon as i get it on hands.
Bump for a still existant issue
Getting constant cutouts with USB tethering on Samung Galaxy S i9000T running Froyo 2.2.1 Darkys Rom 9.5
Wondering if maybe getting a Dock will fix it?
Problem here too.
I am having the very same problem too. USB tethering works fine (faster than Wireless tethering) in the first few minutes, then drops the connection, and usually I have to restart my phone.
The reason I would use USB is that for online gaming Wireless tethering is too laggy in some cases. I would really appreciate a solution here.
I am using JPU modem on Froyo 2.2.1 btw.
Nothing has been solved about this sissue?
My Phone warranty is going to expire in about a month now. I am not going to keep this phone unless Samsung resolves this issue! Seems most of us are unaware of this issue and suggest they don't have the problem
I have been using smartphones since the first one, and never faced such issue. Using USB tether reduces latency significantly and also do not need to use Wifi on both phone and my laptop.
Some of us feel its a PC issue. How come connecting it to 4 of my PCs at home have exactly the same issue? They also have different OS and Firewall/AV.
On top of that, all the GB based ROMs have strange battery discharging issue after full charge and is killing my battery unnecessarily:
http://forum.xda-developers.com/showthread.php?t=1134741
I have escalated these issues to Samsung yesterday. They are affecting me most as these are the primary use of this phone.
I don't have this problems, just give CM7 a try.
Sent from my GT-I9000 using XDA Premium App
Try any 2.3.4 Custom ROM, it works just fine.
Worked with it yesterday all day.
It still gets hot when using the 3G/Wifi connection, but with usb tether it rocks !
Brotuck said:
Try any 2.3.4 Custom ROM, it works just fine.
Worked with it yesterday all day.
It still gets hot when using the 3G/Wifi connection, but with usb tether it rocks !
Click to expand...
Click to collapse
I haven't tested 2.3.4 images for USB tethering much, however what troubles me most is ANY GB ROM start draining battery after full charge which is currently bothering me most as its killing my battery and phone unnecessarily while randomly making my phone go dead anytime even when USB/charger connected all the time (after going dead, restarts in battery charging mode as USB connection gets refreshed)
On my (and i guess others) Rom i get a least 24 / 48 hours. But it really depends on what you do with it during the day. I have not experienced any batterydrain on my custom rom. Ever.....
send from another galaxy !
Brotuck said:
On my (and i guess others) Rom i get a least 24 / 48 hours. But it really depends on what you do with it during the day. I have not experienced any batterydrain on my custom rom. Ever.....
send from another galaxy !
Click to expand...
Click to collapse
I ALSO get the same usage time AFTER DISCONNECTING the charger and using the phone normally.
However, my phone is used primarily for WIFI Tether of 3G connection and hence has to be plugged through the day most of the time when doing tethering. After full charge, my battery drains heavily as the charger is disconnected on GB (instead of disconnecting the battery after full charge) and hence killing the life of my battery through such abuse.
still experiencing this
just an unstable connection
works then every 5/10 minutes it'll stop working and pages will take a while to load then it just starts working again
it's like bursts of connectivity
currently on 2.3.3
can anyone confirm 2.3.4 fixes it after being on 2.3.3?
I'm using a JVR ROM (2.3.4) and have the same problems with USB tethering.
It's rather annoying; i've searched around and it seems to be widespread, I'm not sure if it happens to everybody though.
This is what I've noticed:
- The USB tethering stops working usually at the same time that my Win 7 laptop says that the device could be using USB 2.0 instead for faster speed. At that point, the phone disables USB tethering
- Re-enabling USB tethering on the phone settings makes it work for a minute or so, until the same thing happens
- It does not matter if the phone is on USB debug on/off (i've tried both), or whether it is set to use Kies, Mass storage, or media player under the USB connection menu
I'm trying to find a different USB driver, just to try if it solves anything. But have not been able to find a proper one.
It would help if someone on a 2.3.4 Rom could confirm that USB tethering works for them. At least we could then know whether it is solvable (via configuration, settings, etc.) or not at all until Samsung releases a fix.
I'm having this issue with the Samsung Captivate I897 running Froyo 2.2 through At&T, rooted. I realize that its not the same device this thread's meant for but possibly a related issue? I've been trying to find a solution to this for a few months now... I randomly get disconnected from the internet while using the USB Tethering. I'm forced to re-connect through the phone every 20 minutes or so... I've tried using alternate applications to tether and to use the Mobile AP... With all the apps I run into the same unstable connection as well as with the Mobile AP. This is rather frustating and the last time I spoke with Samsung, I was informed that they no longer "support" usb tethering. I'm at a loss as to what to do, if anyone has any insight this would be greatly appreciated...hopeully even though this is a different device, there's a relation somehow??
Same issue here
I am on DLev's 4.2 Rom. KG3 Modem. I9000 Reoriented Kernel vG_2.1
I just flashed to this ROM and modem version after experiencing the same issues with Darky's XXJVR R3.2.(All stock as provided by the Dev.)
It seems intermittent at this point. I verified that the Mobile AP works great (as of last night). The USB tethering disconnects after a few minutes or seconds and the USB tethering option becomes "unchecked" on the phone itself. Windows 7 Complains about the speed of the USB port and I have swapped to a few different ones, but the same thing happens. Although I am typing this and it has been connected for 20 minutes or so with no issues.
I have also disabled any firewalls or Antivirus to make sure that wasn't the cause. Same issue. I am on Windows 7 x64 (SP1). I am starting to wonder if this a Windows Update that could have caused the issue.
Anyway, just to give more info to the subject.
Ok.. here is something I stumbled across that may have solved this. Appears to be a Windows 7 setting. I have a Captivate but I am running an i9000 Rom, so this might work and might not.
Open Control Panel-->System And Security-->Power Options-->Edit Plan Settings-->"Change Advanced Power Settings". Then navigate to the "USB Settings" and expand "USB selective suspend settings". If the value here is set to "Enabled", click on it and select "Disabled". Click "apply" and then Click "ok".
I pieced this together due to other people having issues with NIC drivers and Windows 7. They were able to get past it with settings on the card drivers under device manager and telling the driver not to do any power management on the card. The drivers for my device has no settings for this, so it is a possible workaround. I am waiting to see what happens. Can someone else give it a try as well?

[Q] Trying to reverse tether, stuck at PPP.

Hi,
I'm not sure whether it's good thing to open one thread related to two problems but I haven't got better idea how to put it.
Main problem:
Since I have acquired my GT540 I'm still searching for the solution for reverse tethering. My operator doesn't have decent data plan, quite often I'm out of any wifi range and currently I'm completely out of wireless.
So I'm left with workable USB connection and Bluetooth. Which leads us to...
Secondary problem:
I found this thread http://forum.xda-developers.com/showthread.php?t=835912 and solution proposed there is quite feasible to me as usbnet still seems to be song of the future and I'm using Linux on the host PC anyway. But when I tried to implement it, I learned that PPP is not enabled in my kernel, which understandably derailed my plan. I use CM7 by Mur4ik.
The question then is, can I somehow painlessly enable this PPP support?
Or could someone politely nudge Mur4ik to enable it in the next release of SwiftDroid? (I don't have sufficient rights to post in devel forum myself)
Or, is there another, working way of getting net access for my phone?
Cheers.
So, you don't have Wireless Adapter or WiFi to put on your desktop and share the internet?
I have tested to share the PC internet connection via USB to GT540 and i never did it...
I bought a WiFi AP and now I use the GT540 with Wireless on my entire house, i think its better than USB.
As I mentioned, sometimes I have wireless access but recently I'm stuck without. Besides, in this most recent cm7-m6 adhoc networking doesn't work either.
Yes, I think too that having wifi coverage in home is nice but the problem I stated is what to do WHEN you don't have it.

[Q] cm10 usb tethering

Recently my windows 7 machine has stopped recognizing my defy when i want to usb tether for some internet access. Wifi tether seems to work, except my phone loses battery even when plugged in.
I've tried rebooting, my computer and phone, but can't figure out why it no longer recognizes usb tethering. i haven't changed anything on either my defy, or pc. Tethering looks like it's working on the defy.
Any ideas?
thanks
tronjojo said:
Recently my windows 7 machine has stopped recognizing my defy when i want to usb tether for some internet access. Wifi tether seems to work, except my phone loses battery even when plugged in.
I've tried rebooting, my computer and phone, but can't figure out why it no longer recognizes usb tethering. i haven't changed anything on either my defy, or pc. Tethering looks like it's working on the defy.
Any ideas?
thanks
Click to expand...
Click to collapse
Use any software for wifi and usb tethering. search play market
I am using: Barnacle Wifi Tether.
Thanks, but i don't need to to download any software. I've been using the built in features from cm10.
Anyways, problem's solved. It turns out somehow my lan adapter got disabled.

[Q] Cannot Activate The Wifi Hotspot

Hi,
Redmi Note 4G (HM NOTE 1LTE)
Android 4.4.4 KTU84P
MIUI 5.3.27 (latest weekly).
The phone succeeds connecting to the internet through the mobile network.
When setting a hotspot in the phone, I succeed to connect to the phone from my laptop, but there is no internet access in my laptop.
The strange thing is, that if I'm connecting the laptop to the phone through the USB cable, and turn tathering in the phone through USB, and connect to the phone to the WIFI network, the laptop succeeds to access the internet through the phone.
Once I set the phone to go to the internet through the mobile network, the laptop loses the access to the internet.
Thanks,
Ofir.
What OS do you use in the laptop? There are some old and well known issues with WiFi tethering and Windows (these can be solved). If you use Windows, I'm pretty sure that your phone is OK.
udda90 said:
What OS do you use in the laptop? There are some old and well known issues with WiFi tethering and Windows (these can be solved). If you use Windows, I'm pretty sure that your phone is OK.
Click to expand...
Click to collapse
Windows 7. But I'm sure it is not the laptop, as I do succeed to use a hotspot with the same SIM when used from iPhone...
Also, as written, the hotspot is working when connected over USB and the phone connects over WIFI.
The issue I'm talking about exists specifically between Windows 7 and Android devices only. I faced that with some phones I had. Just google "wifi tethering android windows 7 not working" to find that there are many people with this problem (like this).
Just to be sure you could try to connect with another laptop running another system (I never had a problem with Linux - Ubuntu/Mint/Fedora/Gentoo). If you don't have one, you can download and burn a live CD.
Most suggestions are installing third party apps, you can try some free apps on Play Store which perhaps enable tethering in some more compatible way. I solved my issues with an init.d script but don't remember what it exactly did (changed some sysctl values every boot).
Or you could change ROM and see if problem is solved. Try Mokee, or MIUI v6.
udda90 said:
Most suggestions are installing third party apps, you can try some free apps on Play Store which perhaps enable tethering in some more compatible way. I solved my issues with an init.d script but don't remember what it exactly did (changed some sysctl values every boot).
Or you could change ROM and see if problem is solved. Try Mokee, or MIUI v6.
Click to expand...
Click to collapse
Thanks!!!
What has solved it was installing a tathering rooted app. It seems that in this phone, even if my service provider allows me to use a hot spot, and although the phone interface allows me to activate the hot spot, I still had to root the machine and install such app to really enable it.
ofiraz said:
Thanks!!!
What has solved it was installing a tathering rooted app. It seems that in this phone, even if my service provider allows me to use a hot spot, and although the phone interface allows me to activate the hot spot, I still had to root the machine and install such app to really enable it.
Click to expand...
Click to collapse
Glad to know! Please press the thanks button if I helped you

Categories

Resources