5.9 ft Power Cord - Acer Iconia A500

http://us-store.acer.com/product.aspx?prodid=132&catid=11
I saw this on another forum and didn't see any word about it here hope that it helps.

I purchased this yesterday. Not bad pricing for the manufacturer. Just didn't like paying ten for shipping.

ogram said:
I purchased this yesterday. Not bad pricing for the manufacturer. Just didn't like paying ten for shipping.
Click to expand...
Click to collapse
yeah, that $10 killed it for me. I'll just continue using the cheap $2 extension cord.

This is nice and all, and thanks, but I wish there was a reliable third party 10-12 foot charge cable, so I can sit a LITTLE bit farther from the power outlet. Thanks though, may look into getting an extra.

Drewwilliams2011 said:
This is nice and all, and thanks, but I wish there was a reliable third party 10-12 foot charge cable, so I can sit a LITTLE bit farther from the power outlet. Thanks though, may look into getting an extra.
Click to expand...
Click to collapse
I'm afraid it wil turn out to be a DIY for me

Klemmer1 said:
I'm afraid it wil turn out to be a DIY for me
Click to expand...
Click to collapse
That's exactly what I did because it was cheaper and quicker. I definitely could have crimped the cables better but I wasn't going for an award winning cable here. Still, everything works perfectly fine and I have a much longer cable.
(Pics taken with my DInc2)

rivera82falcon said:
That's exactly what I did because it was cheaper and quicker. I definitely could have crimped the cables better but I wasn't going for an award winning cable here. Still, everything works perfectly fine and I have a much longer cable.
(Pics taken with my DInc2)
Click to expand...
Click to collapse
So its just one single wire? I have heat shrink and sure i could do the same.Does it have to be that thick of wire? Some times you seen wires that are two.

blueis300 said:
So its just one single wire? I have heat shrink and sure i could do the same.Does it have to be that thick of wire? Some times you seen wires that are two.
Click to expand...
Click to collapse
two leads inside i'm sure. I'm planning on doing this as well.

So is if its 2 seperate wires and I only see one blue so how does that work?

blueis300 said:
So is if its 2 seperate wires and I only see one blue so how does that work?
Click to expand...
Click to collapse
If I were you I would not attempt this delicate procedure since you have obviously never opened up a wire casing, let alone splicing one together.
Sent from my A500 using xda premium

CyaN1de said:
If I were you I would not attempt this delicate procedure since you have obviously never opened up a wire casing, let alone splicing one together.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
It has been some time since I've done something like this is true. I have all the things needed to do something like this but wanted to verify. Thank you for your wise knowledge in this matter. In will make sure I have an different way to change if I make a mistake. Also what made his choice in the gauge wire he used?

I bought one from PWR+ recently. Have only used it for a day now, but it appears much better than another one I bought a while ago, which in fact disintegrated rather quickly.
Sturdy build, longer cord than the OEM charger, plug fits better.
Search for "PWR+® AC ADAPTER CHARGER FOR ACER ICONIA A500-10S16U A500-10S61W A500-10S32U TAB" on e-bay.

I have the 6ft factory charger, after breaking the tip on the original one. It works fine but it's still a little too short. If I can get a new tip, I'll make a really long one out of the broken one.

silly ***ed cord
I know, right? What gives with the cheesy 18 inch power cord Acer sends out with their iconia?
I didnt know they made a longer cord till reading this thread. Seems any PSU that provides the amp and watt rating would work. (old laptop cords dont work since the business end doesn't have that round connector.
I agree with some others; the two buck extension cord is a value buy.
ten bucks for shipping? guess that is how they pad out their costs...

Related

Phone struggling to charge.

Hello everybody. Recently, I had my phone go under a repair which involved opening up the entire phone just to replaces the mini usb port, which was detached from the phone and was trapped inside, losing its ability to charge.
Now, another problem has arisen. The phone has problems charging with wires compatible with its port. When I connect to it to charge via usb, it was plug-n-go, all good. For some unknown reason, it suddenly came under the issue that I need to shift the usb up,down, left, right, and slightly bend it the inside. Now, the original charger doesn't work because it broke, leaving the usb charger as the only option. I can't understand why my HTC Wizard is having this problem,and it's very frustrating. I paid sixty dollars for the repair on the USB, and it seems it hasn't done anything except reattatch it. Any suggestions?
Hey Infinity M,
By your description, it looks like the soldering is a bit loose, thus you have to shift the USB.
Have you tried with different chargers and cables?
If you wish (at your own risk), get a thin screwdriver or something like one, then apply a small force to all directions at the border of the Wizard's USB. Watch if it moves with any pressure, as that will indicate a loose solder.
Good luck, man!
nandobang said:
Hey Infinity M,
By your description, it looks like the soldering is a bit loose, thus you have to shift the USB.
Have you tried with different chargers and cables?
If you wish (at your own risk), get a thin screwdriver or something like one, then apply a small force to all directions at the border of the Wizard's USB. Watch if it moves with any pressure, as that will indicate a loose solder.
Good luck, man!
Click to expand...
Click to collapse
Thank you for your sufficient reply. I have not tried a different cable, and I have checked the Wizard's USB. I'll have to try another cable to check if it works. Do you know where I can buy a charger for a cheap price. Thanks!
Edit: Heh, I realized you're the same person making that HTC Obsidian Case, I'd love to pay you for it lol.
Infinity M said:
Thank you for your sufficient reply.
Click to expand...
Click to collapse
You're welcome
Infinity M said:
Do you know where I can buy a charger for a cheap price.
Click to expand...
Click to collapse
That's a hard one. I would send you straight away to eBay, lol, but I guess you can take a look at some local stores near you. It doesn't need necessarily to be a Wizard's charger. In fact, any charger for a HTC device that uses the same battery will do (the Tytn's I guess). Or you can check the charger label and see if it meets these requirements:
INPUT: 100-240V~0.2A
OUTPUT: 5V, 1A (this one being the most important of all)
Infinity M said:
Heh, I realized you're the same person making that HTC Obsidian Case, I'd love to pay you for it lol.
Click to expand...
Click to collapse
Dude, I'm almost conving myself to make more than one, lol!
Again, good luck man!

WTF wall charger?

Got myself a new Transformer. Unboxed. Looks gorgeous, but wait... the two bits that make up the wall charger don't seem to, you know, slot in? It's very loose, and when plugged in doesn't do squat all. No charge. Am I being an idiot and not fitting one piece to the other right, or do I go back to the shop to get a replacement? :/
It snaps together, and when I got mine it was a pretty snug fit. So you may have to apply a little force, but it does snap together.
Right, the problem is that however much force I apply, the thing doesn't want to snap in. I've been googling like mad to see if anyone else has this problem and did find this one chap with the same trouble; he ended up having to ask the shop to swap it.
When I got mine it was already together
I had to press with what I would deem as an 'unreasonable' amount of force to get them to snap together. Just FYI.
Lucky you. Sigh.
I've even tried to charge with my Samsung Tab's wall adapter. No goddamn luck. Fail, ASUS, fail.
grainysand said:
Right, the problem is that however much force I apply, the thing doesn't want to snap in. I've been googling like mad to see if anyone else has this problem and did find this one chap with the same trouble; he ended up having to ask the shop to swap it.
Click to expand...
Click to collapse
Can you take a pic?
I was going to upload the pics, but I followed advice given in another thread and--using enough force I thought I was about to break them--bent the prongs outward. Voila: it now snaps in and charges. Still a bit of a fail on ASUS for not shipping the two pieces already joined, or better yet make the wall adapter a one-piece affair. Ah well!
This happens to everyone. You really need to FORCE it. There's no particular technique that worked for me, just slide and apply a lot of pressure...you only need to do it once, thankfully.
yeah the amount of force required to put that thing together is insane. after about 5 minutes i grabbed something heavy and just started pounding the thing to death with it until it clicked in lol
That is the one area of the transformer that has disappointed me so far, the charging systems. I didn't understand why the unit wasn't assembled in the box... why I can't charge via usb...and why the cable is so short.
Other than those gripes, I love this thing!!
akashhhhh said:
This happens to everyone. You really need to FORCE it. There's no particular technique that worked for me, just slide and apply a lot of pressure...you only need to do it once, thankfully.
Click to expand...
Click to collapse
*giggles childishly*
nebrando said:
...and why the cable is so short.
Other than those gripes, I love this thing!!
Click to expand...
Click to collapse
Seriously the cable length is ridiculous
Sent from my Transformer TF101 using XDA Premium App
Heh, I wedged a coin between the prongs to bend them a bit. Thanks everyone for the suggestions, though.
The Samsung Galaxy Tab's cable is also stupidly short. A trend, I guess?
Mine took some force but it wasnt like i had to stand on a table to make it work.
grainysand said:
Still a bit of a fail on ASUS for not shipping the two pieces already joined, or better yet make the wall adapter a one-piece affair. Ah well!
Click to expand...
Click to collapse
I could see pre-joined but not a one piece affair. I like that its modular because that means you could get plug adapters that could make it fit any country you move to. This is how it should be with mobile devices.
grainysand said:
Heh, I wedged a coin between the prongs to bend them a bit. Thanks everyone for the suggestions, though.
The Samsung Galaxy Tab's cable is also stupidly short. A trend, I guess?
Click to expand...
Click to collapse
Apparently so is the Iconia's cable. Very strange, as if they expect us to build a little charging stand next to an outlet just for these Android tablets. Somewhat easily solved with a USB 3.0 extension cable, but it's an ugly solution (at least for me, my extension is blue).
not assembled because it's modular and different countries have different adapters. They are wrapped separately and the only variable in the box.
Also, the oem ipad adapter should provide plenty of oomph to charge and comes with a long cord from outlet to charging unit. Again, not as nice and neat as a normal two piece charger and cable, but neither as the add one. Plus, the apple one is modular too and can take a regular one piece like the one on the asus if you don't need the extension cable or if someone comes out with a longer stock cable.
Weird, mine came already assembled from Best Buy.
I do remember my GTablet came with the adapter apart, but that was easy to put together.
Hell I didn't even know it was in 2 peices, got mine yesterday from Newegg and it was already together. Yes the cable length is a joke but I heard about that earlier this week and ordered a 6 ft USB3 cable extension from monoprice for like $4 and it got here today and using it now to charge mine and it's working fine, highly recommended!
Yeah mine was pre-assembled, got mine Monday of this week (and it was brand new stock). Maybe they're doing that on the newer units. I have no idea how I'd ever get it apart if I needed to, I tried and the two pieces are very tightly attached.
The cable... yes the cable is crazy-short. So if you want to use a USB extension, it has to be a USB 3.0 one?

Better (and longer!) AC Adapter!

I order one of these from eBay and it works great. I got one of the car chargers too..just for fun. So my power needs are good to go now! I travel for work and the short factory cross was getting old quick. Hope this helps!
Chlballi
http://cgi.ebay.com/AC-Adapter-Powe...758?pt=LH_DefaultDomain_0&hash=item20b9ede3b6
Edit:
I just saw this one too..don't know much about it though.
http://cgi.ebay.com/Power-Supply-Ad...158?pt=LH_DefaultDomain_0&hash=item3a66a3f866
Electronic Crap has a 6 ft charging cable available
http://electroniccrap.com/store/index.php?main_page=index&cPath=26_27
Sent from my A500 using Tapatalk
Nice find. Between this thread and others I've seen, power cables are definitely no longer in "short" supply.
Chlballi
chlballi said:
I order one of these from eBay and it works great. I got one of the car chargers too..just for fun. So my power needs are good to go now! I travel for work and the short factory cross was getting old quick. Hope this helps!
Chlballi
http://cgi.ebay.com/AC-Adapter-Powe...758?pt=LH_DefaultDomain_0&hash=item20b9ede3b6
Click to expand...
Click to collapse
I bought this and have returned it. The tip was 3mm longer than OEM and was loose in the port. It wiggled so much that power would cut in and out. They even sent me a second cable in case they sent the wrong one, but it was the same as the first. They were polite and eagerly offered a refund. I would not recommend this. I also checked Radio Shack and their tips were the same. I'll splice my OEM cable before I risk frying my tablet.
After using it for a bit i noticed the same thing. Its too late for me to return mine..so. Anyone haveany luck with the one from electroniccrap.com?
Chlballi
I bought the one from electronic crap. Its nice, but nowhere 6 feet long. I'm 5'9" and it barely reaches my neck. It doesn't fit all the way in like the stock, because the plug is about 2mm too long. It's snug though and still better than the stock one. It's about 5' long.
Brash
Sent from my A500 using XDA Premium App
I've got the radio shake 6ft one.. same thing, the plug is a little long, but it doesn't really bother me. There's no little groove for it to click on, but mostly, i'm not handling the tablet too much when it's plugged in. I've thought about trying to file a slight groove in the tip like the oem one.. but it doesn't bother me quite enough. Just wish the adapter and cord wasn't white.

Longer power cable?

Does such a thing as a longer power cable for the A500 exist?
I saw 2M long charge cable for A500, A501 and A100 on ebay. Just try to find it.
Belda said:
I saw 2M long charge cable for A500, A501 and A100 on ebay. Just try to find it.
Click to expand...
Click to collapse
Are they reliable?
I don't know, I never try it. But I wouldn't afraid of it.
Acer sells a longer cable on their website.
forum.xda-developers.com/showthread.php?t=1483137
I find an extension cord does the job
i went to radio shack and bought a piece of wire same as the tablet charging wire. and some shrink tube. added 3 feet to my cable.Doing this carefully with attention to cutting each wire at different lengths long on one end short on the other and keep of the splices at same length will make the cable have NO Bump and prevents a short. After covering with shrink tube and heating it. makes water tight Professional looking results. There are images of this procedure somewhere. I done this before extension cables were available. two days after i bought my tablet. TOTAL COST ABOUT 5-6 us dollars. 30 minutes time to do. With electrical experience. but not needed .
Try at your own risk..
Good luck
erica_renee said:
i went to radio shack and bought a piece of wire same as the tablet charging wire. and some shrink tube. added 3 feet to my cable.Doing this carefully with attention to cutting each wire at different lengths long on one end short on the other and keep of the splices at same length will make the cable have NO Bump and prevents a short. After covering with shrink tube and heating it. makes water tight Professional looking results. There are images of this procedure somewhere. I done this before extension cables were available. two days after i bought my tablet. TOTAL COST ABOUT 5-6 us dollars. 30 minutes time to do. With electrical experience. but not needed .
Try at your own risk..
Good luck
Click to expand...
Click to collapse
LOL.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
I haven't checked the size of the A500's power connector, but I've used this site in the past for DC cord extension cables. Worth a look.
http://www.cordsplus.com/pages/dcpowercord.html
jon-.- said:
Acer sells a longer cable on their website.
forum.xda-developers.com/showthread.php?t=1483137
Click to expand...
Click to collapse
That's actually the same adapter the tablet ships with, short cord and all.
gotroot801 said:
That's actually the same adapter the tablet ships with, short cord and all.
Click to expand...
Click to collapse
Good catch...
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1483137
netham45 said:
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1483137
Click to expand...
Click to collapse
That was already posted...

Repair Broken USB port

I just bought one of these from Kijiji. Tested everything out, handed her the money, only to find out it is a pain in the ass to charge. The port feels loose and the corn has to be in perfectly to get it to charge. I'm mid contract and totaled my other phone, BlackBerry Priv, so I thought I'd try and save some money. I thought wrong.
Is there anyway to repair the port? The rest of the phone looks almost new and I'm impressed how much faster this phone seems than my Priv with the same apps on it.
rkonert said:
I just bought one of these from Kijiji. Tested everything out, handed her the money, only to find out it is a pain in the ass to charge. The port feels loose and the corn has to be in perfectly to get it to charge. I'm mid contract and totaled my other phone, BlackBerry Priv, so I thought I'd try and save some money. I thought wrong.
Is there anyway to repair the port? The rest of the phone looks almost new and I'm impressed how much faster this phone seems than my Priv with the same apps on it.
Click to expand...
Click to collapse
When you say you were wrong, what do you mean?. Did you try soldering the port?
andrescm said:
When you say you were wrong, what do you mean?. Did you try soldering the port?
Click to expand...
Click to collapse
Not yet, that's going to be my last option. I can't do it myself, but have a friend that says they can. The really strange part is the cord it came with seems to work ok, but every other cord won't. It isn't the original one either. It's a 10' generic cord, but it seems to work. It's just a pain to keep carrying my cord around everywhere so I can charge my phone.
rkonert said:
Not yet, that's going to be my last option. I can't do it myself, but have a friend that says they can. The really strange part is the cord it came with seems to work ok, but every other cord won't. It isn't the original one either. It's a 10' generic cord, but it seems to work. It's just a pain to keep carrying my cord around everywhere so I can charge my phone.
Click to expand...
Click to collapse
If you have a cable that works good, then it's a good sign!. Do you feel it a bit "harder" to put in place?. It might be that the two small "legs" below the connector protrude a bit more so they push more against the female connector inside the phone, or maybe the golden pins inside are of better quality. You could try bending them carefully with a needle, always on the cable. Don't touch the phone!
andrescm said:
If you have a cable that works good, then it's a good sign!. Do you feel it a bit "harder" to put in place?. It might be that the two small "legs" below the connector protrude a bit more so they push more against the female connector inside the phone, or maybe the golden pins inside are of better quality. You could try bending them carefully with a needle, always on the cable. Don't touch the phone!
Click to expand...
Click to collapse
The working cable definitely feels tighter than the others. I've had a look at the pins on the phone and the other cables with a hand lens. The phone definitely has some damage to it, but the pins look to be intact. My cables, for the most part, are almost new and in good shape, but the 'legs' don't seem to stick out as far. I guess for now, I'm going to stick to using the one cable, I may try to buy the same name brand as a second and see if that works.
Thanks for the help.
You are welcome!. Good luck!

Categories

Resources