Database Users

[ROM][6/30/2011]2.01.605.0- Basic Debloat v2.1.1

Ok...Since there was a GB leaked RUU, I have 2 things for ya.
1) A rooted, basic debloat version of the GB Rom for the thunderbolt...
2) The upgraded radio for the GB rom....it needs to be flashed or you will not be able to use your phone.
Links will be up in an hour so standby:
What's in the rom?
1) 2.01.605.0 based
2) Android 2.3.4
3) Sense 2.1
4) Removed VZW Bloatware
5) Deodexed
6) Zipaligned
7) Rooted with Busybox 1.19.0 (Thanks to Adrynalyne)
8) Included Netflix and Patch (Thanks rmk)
9) Transparent Rosie w/ 5 column app drawer (Huge Thanks to Chingy)
10) Rosie Settings and ability to remap right button (Huge Thanks to Chingy)
11) Latest lean kernel
12) Updated Superuser
13) Added in Radio Settings to the Settings Menu (Jcase)
14) CRT animation
15) Fixed build.prop to fix the market
Directions:
To Flash Updated Radio:
1) Download and place on root of SD card
2) RENAME TO PG05IMG.zip (had to rename it to put in in my dl directory)
3) Reboot into bootloader and flash.
NOTE: DO NOT FLASH THIS IF YOU DON'T PLAN TO USE THE GB ROM AS YOU WILL LOSE SERVICE
To Flash the Rom
1) Download rom and place on sd card
2) MAKE A BACKUP!!!!!!
3) Wipe Data/ Factory Reset, wipe Cache, Wipe Dalvik
4) Flash Rom in CWR
Changelog
v2.1.1: updated the kernel to prevent WIFI/ 4g issues.
Added in the Script Rapist
Added Capability for swap
Downloads:
Radio
MD5: fda2a314975dd829b4e3611ecc8cfa13
ROM
MD5:76cf2200013b4bf2ae0b738ff2fa4f93
Remove Recent Apps / 6Bar- signal bar

NICE! Thanks!!!
Downloading soon

Reserved for Known Issues: I will update as they come in...this is an early version of GB so there will probably be a couple bugs...

Thanks d!

inzandity said:
NICE! Thanks!!!
Downloading soon
Click to expand...
Click to collapse
Just fixed the radio link and the rom will be uploaded in about 15 minutes....I gotta say, sense 2.1 is pretty sweet...

excellent, downloading radio now

dhemke17 said:
Just fixed the radio link and the rom will be uploaded in about 15 minutes....I gotta say, sense 2.1 is pretty sweet...
Click to expand...
Click to collapse
what's different? does it have the new lockscreens, or was that 3.0?

I hope this doesn't sound disrespectful at all... I'm just a sceptic. I'm not familiar with your work. This is a legit release, right?
Sent from my ADR6400L using Tapatalk

nscott69 said:
what's different? does it have the new lockscreens, or was that 3.0?
Click to expand...
Click to collapse
Same lockscreen...unfortunately...there are some differences with the app drawer and pulldown bar that I have noticed so far...I think they botched the camera up in this build though...I am going to pull one from another build and see if I can get it working....You can take pics with the front camera, and video with the back camera, but pictures taken with the back camera don't seem to save...idk.

nscott69 said:
what's different? does it have the new lockscreens, or was that 3.0?
Click to expand...
Click to collapse
On a different video, it said 2.1.

Breezer23 said:
I hope this doesn't sound disrespectful at all... I'm just a sceptic. I'm not familiar with your work. This is a legit release, right?
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Pretty well known developer of the Lightning Rom. You can see his work here:
http://forum.xda-developers.com/showthread.php?t=1013577

Breezer23 said:
I hope this doesn't sound disrespectful at all... I'm just a sceptic. I'm not familiar with your work. This is a legit release, right?
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Yea boss...I've done lightning rom and vanilla bean for the thunderbolt. I will post up some screenshots in a little bit.

Well you win then. Sexy time ;-)
Sent from my ADR6400L using Tapatalk

what25 said:
On a different video, it said 2.1.
Click to expand...
Click to collapse
This is 2.1....he was asking about the new lockscreen from Sense 3.0 and got them confused.

Sweet. I've been running vanilla bean while I waited for Gingerbread. Excited now... Your work is great.

Good stuff right here! Charging my phone for some GB action! Thanks a million man.

TMYINC said:
Good stuff right here! Charging my phone for some GB action! Thanks a million man.
Click to expand...
Click to collapse
since the OP took the RUU and deodexed/debloated it.. can he confirm that the original one by android police also works? Thanks.

So has the camera issue been resolved?
Sent from my ADR6400L using XDA Premium App

kriskmk said:
since the OP took the RUU and deodexed/debloated it.. can he confirm that the original one by android police also works? Thanks.
Click to expand...
Click to collapse
The original RUU will work but you will lose root if you flash it...

kriskmk said:
since the OP took the RUU and deodexed/debloated it.. can he confirm that the original one by android police also works? Thanks.
Click to expand...
Click to collapse
Jcase put that one together so it is safe to say that the one from Android Police works too. He also started a thread here for it (so far only with a link to the Android Police post) with intentions to post everything here too.

[INFO] Flashable Google Wallet v0.5

I have decided to move my download links to ACS forum as that is my new home! Hope to see you guys over there for the download!
http://www.forums.acsyndicate.net/showthread.php/3240-DEV-Flashable-Google-Wallet-v0.5?p=13712
Hey guys,
I just saw a high demand for keeping the current ROM you are on and being able to get google wallet on your device. I looked through the update and pulled the files ( apks, libs, certs..etc ) I felt might be necessary for google wallet to work on our devices. If you want to test this zip file you are doing so at your own risk, i only have it wiping the dalvik cache but i have tested it on CM 125 and 126 and seems to be working fine.
as always
DO A BACKUP OF YOUR CURRENT SYSTEM BEFORE FLASHING THIS VIA RECOVERY
I am no responsible for anything that happens from this flashable zip
so here is a v0.8 posted by nauckwj...
he figured out a way to get the new r33 version working on nexus s for other carriers ( tmobile tested )
takes a little more work as you have to delete a line out of your etc/hosts file, but at least its working and lets you add a card!
nauckwj said:
Finally!
Got this (more recent) version of Wallet working on TMobile Nexus S.
If you remove 127.0.0 1 www.google-analytics.com from your /etc/hosts file (normally done via AdBlocker-Hosts) then you MIGHT be able to get your CitiBank card to work too. I did.
This fix removes the carrier/handset restrictions that force it to only work on Sprint NS4G.
Try it and let me know if it works for you
(download link in new thread over at ACS)
http://www.forums.acsyndicate.net/showthread.php/3240-DEV-Flashable-Google-Wallet-v0.5?p=13712
Click to expand...
Click to collapse
oh and i didnt have time to mess with the progress bars on the update so dont worry about the weirdness that happens with the progress bar when flashing...just look for the FINISHED
here is the multiupload link for version r27 ...
v0.5 [ latest ]
http://www.forums.acsyndicate.net/showthread.php/3240-DEV-Flashable-Google-Wallet-v0.5?p=13712
IT SEEMS LIKE THE SECURITY ERROR IS GONE NOW FOR ALL NEXUS S 4G USERS. PLEASE REPLY WITH ANY OTHER DEVICES YOU TRY AND MESSAGES YOU GET
* TESTED AND NO-FC WITH CYANOGENMOD NIGHTLY 125 / 126 which you can get from the cyanogen nightlies thread or from crespo4g section of cyanogen page.
please give me feedback as to which roms its working with and i will update this post...
---------------------------------------------------------------------------
COMPATIBILITY:
PHONES:
Nexus S 4G
Nexus S
ROMS:
Any CyanogenMod Nightlies build 125 or after
KNOWN NOT COMPATIBLE: ( this will not work with any 2.3.5 rom )
brainmaster's MIUI NS4G 1.9.30
------------------------------------------------------------------------------------------
IF ALL ELSE FAILS TRY THIS METHOD PROVIDED BY ANIMAL99 ( thanks animal99! ):
Made Nandroid BU just in case!
Made Titanium BU of apps/data
Reboot into Recovery
Wiped system & factory reset.
Flashed Latest update-cm-7.1.0-NS4G-KANG-signed.10012011-1833.zip ( located here : http://fitsnugly.euroskank.com/gigglebread/crespo4g/ )
Flashed Matrix 8.0 CFS Kernel ( located here : http://www.forums.acsyndicate.net/sh...nd-voodoo-v8.0 )
Flashed googlewalletfix_0.5.zip ( located here : http://www.forums.acsyndicate.net/showthread.php/3240-DEV-Flashable-Google-Wallet-v0.5?p=13712 )
Flashed Latest gapps gapps-gb-20110930-237-signed.zip ( located here : http://www.mediafire.com/temasek#6nod1wffk7ncl,1 )
Flashed delvik-wipe ( located here : http://goo.gl/lgO1v )
Wiped Cache
Wiped Delvik
Fixed Permissions
Booted up
Signed Into Google Account
Turned on Wi-Fi
Went To Wallet App and Set Up Wallet (Had $5.48 left on my card!)
Installed Titanium BU and Restored Apps and Data

Needs to be on the newest stIck ROM, already tried
Sent from my Nexus S 4G using xda premium

thank you so much bro
didn't work :/

yeah im looking into it a little more to see if i can get it working on cyanogen mod...

venumx said:
yeah im looking into it a little more to see if i can get it working on cyanogen mod...
Click to expand...
Click to collapse
I was just about to ask if I needed to nandroid and give it a shot. Does anyone know if Wallet will be included in the gapps?

Bradart said:
I was just about to ask if I needed to nandroid and give it a shot. Does anyone know if Wallet will be included in the gapps?
Click to expand...
Click to collapse
they'd have to come out with updates for any phone that they want to have run the wallet app. its a bit more complicated than an apk unfortunately... there are library files and I think they also modified the framework to support the wallet app, but im still looking into that right now

Bradart said:
I was just about to ask if I needed to nandroid and give it a shot. Does anyone know if Wallet will be included in the gapps?
Click to expand...
Click to collapse
Naa. They try to leave the apps out of the gapps package. They have the packman app in the gapps to give you a straight link to the soups you need
in the market. They do it like this for legal reasons.
Sent from my Nexus S 4G using xda premium

We need korg back up so we can get aosp source back. New source usually drops the same day as a ota.
Sent from my Nexus S 4G using xda premium

yeah there is only 694 files in the framework-res of the 2.3.7 update while there are 718 files in the 2.3.5 version of framework-res... it may not even be possible to make a flashable version of this without making it specific to each rom because of this...

Im willing to test this when you think you have got it working.
Nexus S (Tmobile) - Cyanogenmod Nightly 199

noob needs help
hi, new to the nexus. i just tried flashing the zip from recovery but now the phone won't boot all the way. it just goes to the Google screen and stops. any ideas whats happening here?

obsydian2k7 said:
hi, new to the nexus. i just tried flashing the zip from recovery but now the phone won't boot all the way. it just goes to the Google screen and stops. any ideas whats happening here?
Click to expand...
Click to collapse
Restore a nandroid, because the OP stated that it doesn't work.

unknownkwita said:
Im willing to test this when you think you have got it working.
Nexus S (Tmobile) - Cyanogenmod Nightly 199
Click to expand...
Click to collapse
ok sounds good, i have a lot of school work so its delaying it a bit, but I think that most of the problems lay within the framework stuffs, we'll see how it goes
---------- Post added at 08:49 PM ---------- Previous post was at 08:49 PM ----------
obsydian2k7 said:
hi, new to the nexus. i just tried flashing the zip from recovery but now the phone won't boot all the way. it just goes to the Google screen and stops. any ideas whats happening here?
Click to expand...
Click to collapse
Gelladuga69 said:
Restore a nandroid, because the OP stated that it doesn't work.
Click to expand...
Click to collapse
yeah sorry about that obsydian, pullin the link for now till i have something that doesnt boot loop everyone's phone

Man..
If you could do this your gonna be beast. literally. You'll sprout wings and fly.

+1 I really want to see this file!
Sent from my rooted Nexus S using xda premium

Can we re-post the file for testing? Nightly cyanogen 210 just updated i9023 to 2.3.7 anyway we can test again?
Sent from my Nexus S using xda premium

I hope they get a CM with google wallet soon... google just paid for my lunch

Can we re-post the old zip file?
Sent from my Nexus S using xda premium

yeah ill repost it when i get home guys, imma test it when i get home too.

Awesome I am glad that this is back up. One thing I am wondering about is will this mess up or work on my i9023 which works with T-Mobile?
I am going to do a back up first of course.. but I am wondering what model u have tested this on.
Sent from my Nexus S using xda premium

AOKP for the VZW Galaxy tab (Nightlies)

AOKP (Android Open Kang Project) http://forum.aokp.co/page/releases Big thanks to the devs for keeping the P1c alive.
Ian
sent from the innerweb

What is working or not working in this? I use Jt's CM9 on another website, I tried it out for AOKP for Evo 4G and it was nice, but lacking in certain departments that I honestly require for a daily driver. Is there a changelog or?

x4gvnferdy said:
What is working or not working in this? I use Jt's CM9 on another website, I tried it out for AOKP for Evo 4G and it was nice, but lacking in certain departments that I honestly require for a daily driver. Is there a changelog or?
Click to expand...
Click to collapse
The only issue still looming is the headphone jack issue,same work around applies. The current build has recovery issues, the Devs are fixing it for the next build. Been running it for a day and a half coming off of JT's build and is just as stable IMHO. I love TeaM Kangs ROM mods. The changelog is on the linked page.
Ian
sent from the innerweb

ianPhillips1 said:
The only issue still looming is the headphone jack issue,same work around applies. The current build has recovery issues, the Devs are fixing it for the next build. Been running it for a day and a half coming off of JT's build and is just as stable IMHO. I love TeaM Kangs ROM mods. The changelog is on the linked page.
Ian
sent from the innerweb
Click to expand...
Click to collapse
Recovery issues? Well does FFC work? Rear Camera work other than just panorama? I guess i should just flash the ROM and find out, but i'm at work and have no web at home, so well... this is a paradox!

did you just use heimdal to flash?

dav3yb said:
did you just use heimdal to flash?
Click to expand...
Click to collapse
u can flash it using cwm recovery but after u reboot ur recovery gets borked and u cant get into it all until u flash the recovery through heimdal again...actually i couldnt reboot at all on this rom but other than those issues i love it its awesome just as good as jts except it has slightly more custumization options ill prolly be switching back and forth each time one of them puts up a new build cuz they are both awesome

What is the work around for headphone jack? Thanks
Sent from my PC36100 using XDA App

Dmaxx67 said:
What is the work around for headphone jack? Thanks
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Reboot with the jack inserted.
Ian
sent from the innerweb

jtkes693 said:
u can flash it using cwm recovery but after u reboot ur recovery gets borked and u cant get into it all until u flash the recovery through heimdal again...actually i couldnt reboot at all on this rom but other than those issues i love it its awesome just as good as jts except it has slightly more custumization options ill prolly be switching back and forth each time one of them puts up a new build cuz they are both awesome
Click to expand...
Click to collapse
No issues rebooting normally here, and you can hard boot out of recovery(recovery will start but then freeze). Loading cwm through oden or heimdal does work.
Ian
sent from the innerweb

For those familiar with JT's build over on rootz the issues are the same(plus the recovery issue), headphone jack, front cam doesn't render properly but the back cam works with Angel Camera from market flawlessly. As stated earlier the builds run very similar but AOKP has built in customization options exclusive to their builds.
Ian
sent from the innerweb

Quick question since I did not see it at the link above, does it also work with the sprint tab as JTs does? I also saw JTs getting some fixes for camera i believe.
Sent From My KickAss ATT SGS2 SPORTING CM7

ianPhillips1 said:
No issues rebooting normally here,
Ian
sent from the innerweb
Click to expand...
Click to collapse
thats so weird that both of my rebooting options are borked...no matter which one i choose it reboots to the dead android screen like it does when u try to reboot into recovery i always have to power off then power on to "reboot"

RockRatt said:
Quick question since I did not see it at the link above, does it also work with the sprint tab as JTs does? I also saw JTs getting some fixes for camera i believe.
Sent From My KickAss ATT SGS2 SPORTING CM7
Click to expand...
Click to collapse
I would think it would with a DNS hack?
Ian
sent from my sock drawer

I've downloaded a couple of these, modified the updater script to actually install with CWM, tried every "recommended" kernel I can find, wiped this, wiped that, didn't wipe this, didn't wipe that (edit:forgot to add "read what seemed like a million posts about every one of these downloads") and it always ends up the same...it boots, I see the Verizon 3G connection, I can connect to wifi but I absolutely cannot get past the setup wizard because tapping the droid causes "Unfortunately, the setup wizard has stopped" and there's no getting around it. So there it sits until I heimdall 2.3.5 back onto it so it does something useful. If anyone has something concrete I can do to get past this, please let me know.
Edit: Got it! For future reference (myself included!) Install CWM, then install the AOKP system, reboot, wait for it to come up and when it brings up the setup wizard, do:
adb remount
adb shell
cd /system/app
mv SetupWizard.apk OldSetupWizard.apk
exit
Bingo, setup wizard is gone.

I'm a pretty good flasher ..for the life of me, the vzw version won't get me past the Samsung bootup logo. I've wiped..etc.. I'm flashing using cwm 5.0.2.7
Sent from my ADR6425LVW using xda premium

Build 25 is great, recovery works fine. Well worth the flash.
Ian
sent from the innerweb

ianPhillips1 said:
Build 25 is great, recovery works fine. Well worth the flash.
Ian
sent from the innerweb
Click to expand...
Click to collapse
+1 I made some changes to #25 for my Sprint tab and it feels really nice so far.
Sent From My KickAss ATT SGS2 SPORTING CM7

ianPhillips1 said:
Build 25 is great, recovery works fine. Well worth the flash.
Ian
sent from the innerweb
Click to expand...
Click to collapse
Glad to hear that held off on 24 cause i didn't want to reflash recovery thx
Sent from my SGH-T989 using Tapatalk

Being using for a couple of hrs and got to say wow tweaks performance even a pink bootanimation lol thx for posting this
Sent from my SCH-I800 using Tapatalk

Wildchld said:
Glad to hear that held off on 24 cause i didn't want to reflash recovery thx
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Hey wildchld are u building for the galaxy tab too?
I know the inspire roms were bomb
Sent from my SCH-I800 using Tapatalk

[MOD]7n1 Power Menu and 4n1 Reboot Options for 2.11.605.19

As some of you devs have figured out, the advanced power and 4n1 reboot options that works with the previous build doesn't play so nice with the new leak.
Here is the android.policy.jar from the 2.11.605.19 build with the 7n1 power menu and 4n1 reboot options.
This is in an update.zip form so anyone running a 2.11.605.19 ROM can flash it in their custom recovery of choice.
Feel free to include this in your ROMs, just please give credit where credit is due.
http://thisismyandroid.com/orkillakilla/Sense 2.1 Mods/power_options_2.11.605.19.zip

Thanks just what I was looking for.......
Viper

404 - File Not Found?
Link not working?
Is this fix dependent on the version of ROM (AOSP vs Sense)? TIA

ByteSizeSln said:
Link not working?
Is this fix dependent on the version of ROM (AOSP vs Sense)? TIA
Click to expand...
Click to collapse
Sorry, link updated and working.
This is VERY dependent on version. Sense 2.1 only, build base version 2.11.605.19 only.

Any other mods for the new build??
Sent from my ADR6400L using XDA

dblkspecial said:
Any other mods for the new build??
Sent from my ADR6400L using XDA
Click to expand...
Click to collapse
Not yet. Been pretty busy and haven't had time.
Sent from my ADR6400L using xda premium

Is there anything I need to do beyond flashing this in recovery to get it to work? This should work on the latest stock rom update correct? (rooted of course). I installed it via Teamwin Recovery...it appeared to install correctly, but I don't see any new options.
What am I doing wrong

Should work. I made this on the leak but since the build numbers are the same I don't know why it won't work. I haven't had time to try the official update yet though.
Sent from my ADR6400L using xda premium

orkillakilla said:
As some of you devs have figured out, the advanced power and 4n1 reboot options that works with the previous build doesn't play so nice with the new leak.
Here is the android.policy.jar from the 2.11.605.19 build with the 7n1 power menu and 4n1 reboot options.
This is in an update.zip form so anyone running a 2.11.605.19 ROM can flash it in their custom recovery of choice.
Feel free to include this in your ROMs, just please give credit where credit is due.
http://thisismyandroid.com/orkillakilla/Sense 2.1 Mods/power_options_2.11.605.19.zip
Click to expand...
Click to collapse
Thanks man, very nice of you to make this!

[ROM][PORT][ICS] TiramiSlim RC2 V1

***UPDATE 6/21/12***
CLICK HERE to download latest version
MAKE A BACKUP IN CWM
PLEASE READ THIS AFTER INSTALLING LATEST VERSION:
http://forum.xda-developers.com/showpost.php?p=27761500
***UPDATE***
I RECOMMEND A FULL WIPE ON THIS INSTALL. IF YOU DO NOT WIPE, AND SOMETHING BREAKS, FLASH AGAIN WITH WIPE AND THEN REPORT IF THE PROBLEM STILL EXISTS.
Changelog:
Full changelog is available to read in aroma, these are just the changes for the port.
-Updated ROM to latest version from DJSound
-Edited build.prop to match our device
-Updated build.prop to point to port version of OTA code
-Updated devil and semaphore kernels to latest version
This is a port of DJSound's TiramiSlim for the i9000.
OLD DOWNLOAD (RC2)
CLICK HERE
Instructions to flash (from original thread):
From ICS (any 4.0 ROM) or from RC2
1) Place the ROM on your Internal-SD Card
2) Go into recovery mode
3) Wipe data | Wipe Cache | Wipe Dalvik Cache | Format /System (repeat these steps 2 times just for security)
4) Flash the ROM and follow the AROMA Installer instructions.
5) Reboot
Guide when you are on a Gingerbread ROM:
1) Flash a Stock Gingerbread ROM
2) Flash a custom GB kernel
3) Flash an ICS kernel
4) Your phone will go into a bootloop -> Remove the battery and put it back.
5) Use 3-button-combo to get into recovery.
6) USB-Mount your SD Card & Place the ROM on your Internal-SD Card (or do this first...)
7) Flash the ROM and follow the AROMA Installer instructions.
8) Reboot & Enjoy!
Original thread:
http://forum.xda-developers.com/showthread.php?t=1664049
Any problems, suggestions, comments, feel welcome to post.
Standard Disclaimer Mumbo Jumbo about spontaneous combustion, girlfriend breaking up with you, sky falling, other funny stuff, etc. Once you flash, I will be more than happy to help, but remember a couple things:
-I do not offer a warranty, your manufacturer's/carrier's warranty is now void.
-I am not responsible for what to do to your device.
-I am only human, so don't expect me or my ROM to behave perfectly!
This ROM is being updated by the original dev, when he updates, I will update. Otherwise, updates solely by me will happen when I see fit or when someone suggests a change or brings up a problem.
When providing bug reports, please provide some simple information such as:
ROM version (I know it's just the first version, but for future reference...)
Steps you followed to install (yes, write them out)
ROM you came from
If you wiped ALL (data/cache/dalvik/system)
If you restored ANYTHING (ex. with Titanium Backup)
Steps to recreate the problem/any useful info about the problem.
Happy flashing!

Sounds pretty good. Looking forward to trying it.
Sent from my SGH-I897 using xda premium

Can't Wait!!!

Link is up!
Who wants to be first?

joshlevinson said:
Who wants to be first?
Click to expand...
Click to collapse
As soon as I get home!!!
Sent from my SGH-I897 using xda premium

Messaging keeps forcing close
Sent from my SGH-I897 using xda premium

zzmomo73 said:
Messaging keeps forcing close
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Refer to OP for bug report guide. Edited for brevity.

joshlevinson said:
When providing bug reports, please provide some simple information such as:
ROM version (I know it's just the first version, but for future reference...)
Steps you followed to install (yes, write them out)
ROM you came from
If you wiped ALL (data/cache/dalvik/system)
If you restored ANYTHING (ex. with Titanium Backup)
Steps to recreate the problem/any useful info about the problem.
Click to expand...
Click to collapse
Ok so wiped everything twice like you said... Chose custom installation (the one where you don't have to reinstall the ROM for changing anything) and I chose devil kernel, stock theme, and the some apps. But I noticed that when I go to settings /about phone every thing there is from the rom I was running before this, like kernel and mod version.. I believe this ROM is based on slim but it has an aokp theme (the one I had before fishing this.) And if I go to system/xxxx everything there is also from the previous ROM I was running. but the ROM is very fast smooth and responsive. I came from simply aokp v6
Sent from my SGH-I897 using xda premium

zzmomo73 said:
Ok so wiped everything twice like you said... Chose custom installation (the one where you don't have to reinstall the ROM for changing anything) and I chose devil kernel, stock theme, and the some apps. But I noticed that when I go to settings /about phone every thing there is from the rom I was running before this, like kernel and mod version.. I believe this ROM is based on slim but it has an aokp theme (the one I had before fishing this) but the ROM is very fast smooth and responsive.
Edit: I came from simply aokp v6
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Correct, this is a mod of SlimICS, hence TiramiSLIM. So...your issue with messaging FC'ing remains? And to clarify...what kernel and mod version show up in your current setup?
Also, what messaging app did you install? Inverted? Stock?

joshlevinson said:
Correct, this is a mod of SlimICS, hence TiramiSLIM. So...your issue with messaging FC'ing remains? And to clarify...what kernel and mod version show up in your current setup?
Also, what messaging app did you install? Inverted? Stock?
Click to expand...
Click to collapse
OK so I wiped everything again and tried installing it using default from aroma installer and all is well...after that I flashed using modify me and worked perfect..no fC's or anything!, thanks for porting this for us
Sent from my GT-I9000 using xda premium

Great!
Glad it worked for you, and thanks for keeping the issue updated!

Thanks for porting this. I hope to see your thanks meter continue to go up. I know it more than doubled today!
A couple questions if you don't mind-
On the original post in the I9000 forums, they have some sweet themes. What is the best way to go about getting those? Are they available for the captivate?
I found in that forum that others are trying out different kernels. Have you experimented at all? It seems to me that the one that comes with it doesn't support overclock and BLN through NSTools.
EDIT: The latest version of Devil Kernel works for me so far.

wwcjr91 said:
Thanks for porting this. I hope to see your thanks meter continue to go up. I know it more than doubled today!
A couple questions if you don't mind-
On the original post in the I9000 forums, they have some sweet themes. What is the best way to go about getting those? Are they available for the captivate?
I found in that forum that others are trying out different kernels. Have you experimented at all? It seems to me that the one that comes with it doesn't support overclock and BLN through NSTools.
Click to expand...
Click to collapse
you can find them from the update me app
Sent from my SGH-I897 using xda premium

wwcjr91 said:
Thanks for porting this. I hope to see your thanks meter continue to go up. I know it more than doubled today!
A couple questions if you don't mind-
On the original post in the I9000 forums, they have some sweet themes. What is the best way to go about getting those? Are they available for the captivate?
I found in that forum that others are trying out different kernels. Have you experimented at all? It seems to me that the one that comes with it doesn't support overclock and BLN through NSTools.
Click to expand...
Click to collapse
thanks Zzmomo. Use update-me app for themes (instructions are in original thread). kernels can be flashed in aroma installer. Update me app probably has i9000 kernels...I'll check this out.
So yeah...I'll have to release an update to the ROM to fix the update me app for the captivate. I'll probably also release an update.zip so current users don't have to download the whole ROM again.
Sent from my GT-I9000 using xda premium

joshlevinson this is a very nice rom. works like a charm !!! thank you so much for this!

I was messing around a bit and tried putting galaxy s3 ui sound instead of the regular ones. I replaced them using Root explorer and changed all the permissions to the right one and rebooted but it didn't work so I tried putting the default ones back but still didn't work... Any way I can get then back without having to reflash the ROM.. And if I do have to reflash it do I need to wipe or not
Sent from my SGH-I897 using xda premium

Did you replace the sounds in the aroma installer, or just by using root explorer? Please explain the process a bit more.

joshlevinson said:
Did you replace the sounds in the aroma installer, or just by using root explorer? Please explain the process a bit more.
Click to expand...
Click to collapse
I replaced them in root explorer, but no ui sound came out... So I tried reflashing with wiping key cache and dalvik but still didn't work...
Sent from my SGH-I897 using xda premium

What files/location did you replace, and where did you get these files? Also, please detail every step you made in the reflash process.

joshlevinson said:
What files/location did you replace, and where did you get these files? Also, please detail every step you made in the reflash process.
Click to expand...
Click to collapse
OK for replacing the file, I got them from team remics and I took system/media/audio/UI and replaced them with the ones from this rom. Set permissions and rebooted...
Then for the reflash process I wiped cache and dalvik cache , used modify me and selected devil, then replaced galaxy s3 and delete default sound, and selected some apps.. and rebooted but still no sound... so then I reflashed using default installation and then flashed again using modify me and all worked. Sorry for the trouble
Sent from my SGH-I897 using xda premium