bell GT-i9000m - Galaxy S I9000 General

Hi Guys,
Sorry if this has been covered somewhere else. I have checked the forums, checked youtube and now am finally asking through this.
I recently had my phone unlocked so i could use my rogers card...works great however i'm stuck with no home or back button. I see there's lots of issues and the suggestion is to go back to stock firmware. I've downloaded odin3 1.85 and but can't find the orginal firmware. i've created accounts at sams (firmware/mobile) and still can't find the firmware. Can someone please just tell me the best way to fix this issue? I tried the 2663 FW update and that didn't fix it.
Here's the specs:
pda: i9000ugkg3
phone: i9000ugkg3
csc: i9000bmckg3

If you are looking for the Bell UGKG3 ROM, it's here:
http://forum.xda-developers.com/showthread.php?t=1102881
search for UGKG3

Thanks for the link. Unfortunately the download gets redirected to megaupload and the site is down.
I tried googling GT_I9000M_UGKG3_UGKG3_BMCKG3_Sbl.exe and nothing, no torrents found anywhere either. Can you recommend another link??
Thanks!

Have you tried sammobile.com?
Sent from my GT-I9000 using XDA App

jdkoops said:
Thanks for the link. Unfortunately the download gets redirected to megaupload and the site is down.
I tried googling GT_I9000M_UGKG3_UGKG3_BMCKG3_Sbl.exe and nothing, no torrents found anywhere either. Can you recommend another link??
Thanks!
Click to expand...
Click to collapse
There are multiple referenced site there, only the megaupload one is missing
the link named depositfiles seems to be OK.
Aerofreak360 said:
Have you tried sammobile.com?
Click to expand...
Click to collapse
sammobile does not list UGKG3.
Only Bell ROM it lists is I9000UGKC1, which is Froyo.

Hi,
I became a member specifically to pursue this. I also am looking for the abovementioned files. At this point, assuming that they're not re-upped to another filehoster, and assuming that there's no way to procure them directly from someone at xda, I'm prepared to look for an alternate GT-I9000M rooting method. Starting here: anyone know of an alternate procedure that can be found under the xda aegis?
I want to thank the Canadian members whose advice has already facilitated the rooting and unlocking of my I9100: thank you! thank you! thank you!
Edit: I've been digging through xda, but no luck yet.

lowhauler said:
Hi,
I became a member specifically to pursue this. I also am looking for the abovementioned files. At this point, assuming that they're not re-upped to another filehoster, and assuming that there's no way to procure them directly from someone at xda, I'm prepared to look for an alternate GT-I9000M rooting method. Starting here: anyone know of an alternate procedure that can be found under the xda aegis?
I want to thank the Canadian members whose advice has already facilitated the rooting and unlocking of my I9100: thank you! thank you! thank you!
Click to expand...
Click to collapse
Try superoneclick, it worked on my friends i9000m.

I tried all the links on the multiupload/0H6SC9W6FG download page and they're all having issues. any other suggestions? If somebody has the file and would be willing to torrent it for a few hours, i would be very grateful. Thanks!
None are working:
Uploadking
Uploadhere
Depositfiles
Hotfile
Zshare
Uploading.com

there you go
...copy paste the adress in browser
depositfiles.com/files/46f66t5ce
I zipped and uploaded the three part firmware (GB 2.3.3) for odin on depositfiles for i9000m

Awesome Thanks! i'm downloading now. I'll have to have another read on actually updating now so i don't screw it up

xxxxxxxxxxxxxxxx

Everything download - again a big thank you!
Before i execute i just want to confirm (i'm nervous - no warranty so no exchange)
1. Set unit to USB debug
2. Launch Odin, connect USB
3. Odin msgbox "added"
4. import each file ( pda,phone,csc)
5. execute start
I'm going to leave the default checkboxes checked (f.reset time, auto reboot)
leave re-partition un-checked.
good to go or am i missing anything?

jdkoops said:
Everything download - again a big thank you!
Before i execute i just want to confirm (i'm nervous - no warranty so no exchange)
1. Set unit to USB debug
2. Launch Odin, connect USB
3. Odin msgbox "added"
4. import each file ( pda,phone,csc)
5. execute start
I'm going to leave the default checkboxes checked (f.reset time, auto reboot)
leave re-partition un-checked.
good to go or am i missing anything?
Click to expand...
Click to collapse
Yes exactly! I've just try it and all is back to stock 2.3.3 for my GT-I9000M

worked perfectly for me.. after putting the unit in 'download mode'.
i'm still having issues with the back and menu button .. both are
still not working.
What do you suggest??

Would someone be able to give me a link for stock 2.2.1 for my model?? I have read a few threads that say loading this and doing the 2663 works. Currently i'm on 2.2.3 stock.
I have downloaded I9000XWJS8.rar but not 100% if its ok for 9000m
thanks!

Also awesome, also thanks! downloading now, will be trying this out soon, and report back.
---------- Post added at 02:05 PM ---------- Previous post was at 01:51 PM ----------
Also awesome, also thanks! downloading now, will no doubt report back with some difficulty or other, but thank you.

Altheos said:
there you go
...copy paste the adress in browser
depositfiles.com/files/46f66t5ce
I zipped and uploaded the three part firmware (GB 2.3.3) for odin on depositfiles for i9000m
Click to expand...
Click to collapse
Hi Altheos,
Firstly just wanted to say thanks for the orginal download. After restoring back to stock with a found JL2 version i was able to finally get the home/back buttons working again YAY. Just curious now that that i've been dorking around on the SGS. How were you able to create the 3partskg3fori9000m(odin) archive with
CSC_BMCKG3.tar.md5
PDA_UGKG3_Sbl.tar.md5
PHONE_UGKG3.tar.md5
Just curious as i've now added mulitple apps and am trying darkyroms latest and would like to image the state my phone is in now for later restore if need be.

I downloaded it some time ago from another source here that went down with megaupload, though I know that if you search for a guide in the forums, you should find various guides.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

If you're rooted, download spooffw from the market, follow the instructions to spoofit to JL2 then hook up KIES and it will download and install pure stock KG3
just remember to factory reset afterwards so you clear out any memory leftovers.
Sent from my Galaxy Nexus using Tapatalk

Related

[Q] PLEASE HELP ME! Galaxy Y Reboot Problem - Need help installing 2.3.6 firmware!

Hello all,
I've had my mobile device for seven months and it has worked great.
Recently (4 days ago) it started experiencing problems.
After every phone call that is terminated (end call button depressed) the mobile device automatically restarts itself.
I have done countless hours of research online and see that is a fairly frequent problem with the mobile device.
One article I read from a website depicted the source of the problem to be an internal memory inefficiency by the mobile device.
With that being said, I thought I would give Samsung a call to see if they could help me install a new software version on the device.
I spent two days calling Samsung in all their offices around the world. In the United States, in India, in China, in Jordan.
All the places that I called gave me the run around because I am using an international phone, and basically did not offer any assistance.
My last resort is XDA developers, - therefore, I do apologize if this thread is covered in another post. I did try to search, yet I could not find what I was looking for.
Basically what I am trying to do is download odin3 v. 1.84 or 1.85 and the appropriate download package to use to install 2.3.6 onto the phone.
I believe DDLC2 Android 2.3.6 Gingerbread is the firmware version that I need.
I read online that this update or change from 2.3.5 to 2.3.6 will solve my rebooting problem. Is this correct?
With that being said, 99% of the download links that I have found on google while searching for odin as well as the firmware package are invalid, the links are broken/removed/ or do not work.
The other 1% of the download links that are available online are full of malware and spyware, instead of the appropriate files.
I am kindly asking that someone provide me with the correct Odin link to download, as well as the appropriate firmware files needed to upload to Odin to be able to install 2.3.6 on my mobile device.
Does the mobile device need to be rooted to install 2.3.6 onto it via Odin?
My Galaxy Y S5360L is currently not rooted.
Please take pity on me, I have been trying to fix my mobile device for a few days now non-stop. I have been up for over 19 hours a day searching for a solution.
I really like this mobile device, and I do not wish to throw it away because of this problem.
Here are some instructions I found that tell what to do after Odin and Firmware files are downloaded. Are these correct?
First thing you need to do is go down to Settings then Applications then Development and Make sure you have enabled USB Debugging.
Before starting the process make sure you have a good 70-80% charge remaining on your device.
After you make sure you have everything ready for the update download this file.
Extract the files in the zip file. Do not connect your device to the computer yet. Next you need to enter your phone in download mode.
For that first switch Off the phone and then Hold down the Volume Down OK and Power Button simultaneously.
Now run Odin from the extracted files and then connect your Galaxy Y to your computer.
Once you connect your device a section in the Odin Window should turn yellow.
After that click PDA in the Odin Window and select the .md5 file from the extracted files. Now just click Start.
Just wait for the process to finish and reboot. That's it
No root required and the tutorial i right and for odin search my post there is the nwest odin.worx 100%,the post is in general section.
MANY GREEEEETZ!!!
As CALIBAN666 said, no rooting is required. Go to the development section, and you'll see a thread by Doky73 (it's stickied). You'll find your firmware files there, a link to Odin, as well as instructions on how to flash it.
Sent from my GT-S5360 using Tapatalk 2
anasdcool71 said:
As CALIBAN666 said, no rooting is required. Go to the development section, and you'll see a thread by Doky73 (it's stickied). You'll find your firmware files there, a link to Odin, as well as instructions on how to flash it.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Thank you very much for the response.
I see the thread by Doky73.
There are far too many packages available, I don't know which one to choose.
Does every package download include a copy of Odin inside it, or do I have to download Odin separately?
I read that we are supposed to use 1.84 and not 1.85 is that correct?
Could you please recommend a package for me to use, so that my rebooting problem will go away.
Kritikopedo said:
Thank you very much for the response.
I see the thread by Doky73.
There are far too many packages available, I don't know which one to choose.
Does every package download include a copy of Odin inside it, or do I have to download Odin separately?
I read that we are supposed to use 1.84 and not 1.85 is that correct?
Could you please recommend a package for me to use, so that my rebooting problem will go away.
Click to expand...
Click to collapse
The packages are arranged according to the countries. See the firmware package under your country and download it. Yes, you'll have to download Odin seperately. It dosen't matter whether it's 1.84 or 1.85.
Sent from my GT-S5360 using Tapatalk 2
Look which one is the latest for your country.odin is a windows tool and only on pc currently.try the odin from my post i suggest you.believe me its easy,ten minutes ands done.
MANY GREEEEETZ!!!
anasdcool71 said:
The packages are arranged according to the countries. See the firmware package under your country and download it. Yes, you'll have to download Odin seperately. It dosen't matter whether it's 1.84 or 1.85.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
I live in the United States, in the commonwealth of Virginia near Washington DC.
I purchased the phone online when it first came out back in November of 2011.
Which package do you recommend that I use?
I don't see one listed for North American users.
Should I choose the European version?
Kritikopedo said:
I live in the United States, in the commonwealth of Virginia near Washington DC.
I purchased the phone online when it first came out back in November of 2011.
Which package do you recommend that I use?
I don't see one listed for North American users.
Should I choose the European version?
Click to expand...
Click to collapse
I suggest you go with the europe one. I'm an Indian, using a custom rom based on Indonesia's stock rom. And i've had no problems upto now.
Sent from my GT-S5360 using Tapatalk 2
CALIBAN666 said:
Look which one is the latest for your country.odin is a windows tool and only on pc currently.try the odin from my post i suggest you.believe me its easy,ten minutes ands done.
MANY GREEEEETZ!!!
Click to expand...
Click to collapse
What is the title of the thread you created, I will try to find it.
I am currently using Ubuntu/Linux, but I can boot into my Windows partition to install Odin.
Im using ubuntu right now because I got some malware yesterday on my windows partition when I was searching for Odin versions to download.
Here you go,bro. http://forum.xda-developers.com/showthread.php?t=1844289
MANY GREEEEETZ!!!
Update on my Galaxy Y Problem
Here is some information about my mobile device.
IMEI: 358354/04/009689/2
S/N: RU8BA35860N
Model: GT-S5360L
SSN: S5360LGSMH
FCC ID: A3LGTS5360L
PDA: S5360LUHKI6
PHONE: S5360LUHKI6
CSC: S5360LuuBKI4
Sellout SMS: OFF
PCode: GT-S5360MALTTT
Mode: Prod
name: t-mobile
APN: epc.tmobile.com
MMSC: mms.msg.eng.t-mobile.com/mms/wapenc
I have downloaded Odin V. 1.84.
I tried downloaded a firmware package, put the phone in download mode, followed all the steps and Odin said PASS in the upper left corner with a Green Light.
I was very happy.
I let me phone reboot itself, I go into settings, and I see it is still running 2.3.5 ?
Besides that, I check the codes, and all of the firmware versions are the same as the originals that came with the mobile device.
Can someone please help me find a 2.3.6 package that I can install ?
You can install custom ROM
Mohamed.Anwar said:
You can install custom ROM
Click to expand...
Click to collapse
Will installing a custom rom fix my problem?
What custom rom do you recommend, CM7?
Can you please walk me through how to install it?
its not the best sollution to flash an custom rom,i look and send a report when found the right firmware.and why using this old odin one?in my link its the newest one,i think its better for using.
---------- Post added at 11:57 PM ---------- Previous post was at 11:51 PM ----------
https://hotfile.com/dl/165283324/2d70a00/S5360_XXLF3_OXXLF3_XXLF3_wipe_by_SplitFUS2.zip.html
thisw is the latest one for europe.use it.
another quest:have you in your settings in application setting under development the usb debugging enebled thats a must?
Thread Moved to Q&A
I have found out an update to the problem I am having.
I successfully patched from 2.3.5 to 2.3.6 by using one of firmware packages.
However, if I reboot the phone, or turn it off, - when I turn it back on it will start experiencing problems.
Right now it is working 100%.
As soon as I reboot the phone though, the end call problem will reappear.
I am still using the phone after the initial boot, after the install of the new firmware.
Any ideas why the problem comes back after I restart the phone?
you have the three files flashed with odin,right?try to flash the totoro pitfile too,it in my odin zip includet,did you have data/factory+chache in normal recovery wiped,after odinflash?try these things too,maybe its helps.good luck buddy!!!

[Q] N900W8 Rogers Stock Firmware

Hey guys,
Does anyone know of any alternative way to download the stock firmware for the N900W8 on Rogers. I have tried Sammobile and samsung-updates they both use terafile and rapidgator, neither of which are able to download the file. The download reports that it's going to take a few days and then a network error failure every single time. I searched on here and found http://fus.nanzen.se/ which doesn't load and http://note.cfa.aero/ which just gives me a plain black page. I've tried so many sites and it's getting to be quite frustrating. Would any of you have a copy that I could download or know of another site I could try?
Thank you so much for your help.
Just flash stock Kit Kat rom in this thread: http://forum.xda-developers.com/showthread.php?t=2618633
You'll stay stock and upgrade to kit kat, boom, 2 birds one stone
majorsquirrel said:
Hey guys,
Does anyone know of any alternative way to download the stock firmware for the N900W8 on Rogers. I have tried Sammobile and samsung-updates they both use terafile and rapidgator, neither of which are able to download the file. The download reports that it's going to take a few days and then a network error failure every single time. I searched on here and found http://fus.nanzen.se/ which doesn't load and http://note.cfa.aero/ which just gives me a plain black page. I've tried so many sites and it's getting to be quite frustrating. Would any of you have a copy that I could download or know of another site I could try?
Thank you so much for your help.
Click to expand...
Click to collapse
If you still need the stock 4.3 Rogers, get it here.
hey_joe said:
If you still need the stock 4.3 Rogers, get it here.
Click to expand...
Click to collapse
Thank you!!!
hey_joe said:
If you still need the stock 4.3 Rogers, get it here.
Click to expand...
Click to collapse
I really wonder why people do not ZIP or 7z before uploading such huge files - a close to 50% gain in time (or bandwidth) is not irrelevant
xclub_101 said:
I really wonder why people do not ZIP or 7z before uploading such huge files - a close to 50% gain in time (or bandwidth) is not irrelevant
Click to expand...
Click to collapse
If you are directing that comment to me, I did not upload this file. Just found it in one of the comments in N900W8 repositories list. Just trying to help somebody who doesn't know their way around the forums. I actually appreciate people who goes out of their way to provide this file so that you and I can benefit should we ever need the file. I don't really ask for more than what they can give since they do it in their own free time and they don't charge a cent for it.

Stock l720 rom

Alright, I have looked around, and cannot find a stock ROM for an L720T. Can someone shoot me in the right direction? Should have saved mine before I started messing with it, never thought I would need to go back to stock.
Look in the triband thread. Your answer is in there.
Sent from my SPH-L720 using Tapatalk
jacklane21 said:
Alright, I have looked around, and cannot find a stock ROM for an L720T. Can someone shoot me in the right direction? Should have saved mine before I started messing with it, never thought I would need to go back to stock.
Click to expand...
Click to collapse
Did you find what you were looking for?
Sezmar said:
Did you find what you were looking for?
Click to expand...
Click to collapse
Not yet. I really need the full firmware with all the files (modem!) and I can't find it anywhere. I read elsewhere that when you DL firmware and it is just one file, that everything is part of it. It definitely was not. I have read from other threads that there are people looking for full firmware, but nothing came of those threads. I will now look in tri-band, as I did not come across that before... I'm just too new to the site.
daniel4653 said:
Look in the triband thread. Your answer is in there.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I just noticed that i fat-fingered the "T" out of the thread name for this.... hopefully that won't throw future searches off-track...
If you are talking about the thread Sprint Galaxy S4 SPH-L720T LTE Triband Stock Firmware Root by JohnKC913, then yes, and I am currently downloading it and have 10 minutes left (will post results).
If it doesn't have all the files ( .pit, bootloader, pda, phone, csc) then it will not work, as I REALLY need that PHONE file!
I am uploading NAF and NC6, as they are done I will post the links. They have Odin included.
Alright, it finished, and it was the same exact Firmware I found elsewhere, so it's a no-go.
Nothing of value came from that thread, but I am going to double-check it now in case I scrolled past some gold.
This is NAF Factory Image, I turned on File Share so it should be fast.
http://www.filefactory.com/f/260655135562b811
MD5 Checksum: 5B0C837EDEAE9692963753A12EA2C6A3
Just started downloading, will report back with results! Thank you sir.
EDIT: It's crawling at 91Kb, but I'm not complaining! I'll have it in 210 minutes.
This is NC6 Factory Image, I turned on File Share so it should be fast.
http://www.filefactory.com/f/260655135562b811
MD5 Checksum: CE145F2BDA4C5730FCB9A5B97ACA4999
I am setting up mirrors on my dropbox, if anyone would like to mirror please help out.
All right, just finished the DL, it was the Firmware bundled with an older version of ODIN. Just the PDA file.
jacklane21 said:
All right, just finished the DL, it was the Firmware bundled with an older version of ODIN. Just the PDA file.
Click to expand...
Click to collapse
Were you able to recover? These are the full recovery files from Samsung, same ones that you get from BestBuy. Don't ask...
Here is Dropbox link, same MD5 Checksums
https://www.dropbox.com/sh/gj4e6ruzcjvbubi/a_m1HR7sHS
Sezmar said:
Were you able to recover? These are the full recovery files from Samsung, same ones that you get from BestBuy. Don't ask...
Click to expand...
Click to collapse
Yeah I ran it, but it didn't write anything for the radio stuff.

[SM-N910T] [ODIN] MM TW 6.0.1 Kies ripped files - 100% Virgin

I ripped these files directly from Kies3. I supply these for anyone that needs or wants the virgin files for development or whatever. You assume all risk by using these files I offer no guarantee.
Firmware split into separate files.
AP Main ROM Platform
BL Bootloader
CP Modem
CSC Region / Carrier Data
https://mega.nz/#!wURj0QgD!KeX6dOzL1I8A18XwYvB2VuFONJlEoLbLb8iRYRV3Alk
The password to the archive is XDA601
and the MD5 Checksum is : 1f86e82f97cfa209744cb4e164ee043b
Nirrik said:
I ripped these files directly from Kies3. I supply these for anyone that needs or wants the virgin files for development or whatever. You assume all risk by using these files I offer no guarantee.
https://mega.nz/#!wURj0QgD!KeX6dOzL1I8A18XwYvB2VuFONJlEoLbLb8iRYRV3Alk
The password to the archive is XDA601
and the MD5 Checksum is : 1f86e82f97cfa209744cb4e164ee043b
Click to expand...
Click to collapse
lol this has been posted like 3 times now
Thats weird because I looked for official TMO SM-N910T files and couldnt find them. They were all modified or developer preview versions not release versions. Also mine includes the AP, BL, CP, and CSC flashes.
So it's the sm-910t not the t3 version.
and you're right. The other post is for the sprint version. I'm getting a fail! (Auth) when I try to flash it
Nirrik said:
Thats weird because I looked for official TMO SM-N910T files and couldnt find them. They were all modified or developer preview versions not release versions. Also mine includes the AP, BL, CP, and CSC flashes.
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4-tmobile/development/stock-n910t-n910tuvu2epe3-6-0-1-t3407018
is that what it is you were afraid of? I was stealing your thunder? Either way I was just trying to help out, there are multiple versions out all slightly different and theres nothing wrong with mirrors if in fact you have the same 4 flashes in your zip.
Nirrik said:
is that what it is you were afraid of? I was stealing your thunder? Either way I was just trying to help out, there are multiple versions out all slightly different and theres nothing wrong with mirrors if in fact you have the same 4 flashes in your zip.
Click to expand...
Click to collapse
Thunder? Hardly, I could care less. This is not a popularity contest. Hence why my donate link doesn't even go to me.
I too was simply trying to also help out. There is no need for multiple posts of the exact same thing. (you were not the only one)
Some of the other posts were actually the wrong file and were bricking devices. I simply wanted to make sure people had the 100% for sure one.
Also AFH mirrors the file 6 times and is much faster then MEGA.
In addition typically/historically speaking stock firmware are usually posted in the Development section. (not a rule, I dont think)
4 flashes? What do you mean? There is one tar file in my zip.
---------- Post added at 01:36 AM ---------- Previous post was at 01:17 AM ----------
Actually to add; Your post is very useful I would just re-word the title. (and if possible request that it is moved to dev)
Your title "Tmobile 6.0.1 ODIN files" is not very detailed and a poor choice of words for what you posted.
Including the model of the phone and the build version of the firmware you posted would be more helpful. (there are two different models of the Note 4 for T-Mobile)
Because you got the files from Kies it contains the firmware split into separate files.
AP - Main ROM Platform
BL - Bootloader
CP - Modem
CSC - Region / Carrier Data
These things are very useful for some "power users".
However to many users this can be very confusing to flash with Odin and would need further explanation.
The Firmware I posted is what every one is accustomed to. (a tar you flash via Odin in PDA/AP)
---------- Post added at 02:13 AM ---------- Previous post was at 01:36 AM ----------
Then again it looks like this guy posted all of those files well before any of us. Dunno what to say at this point.
http://forum.xda-developers.com/note-4-tmobile/development/epe3-stock-t-mobile-marshmallow-t3406826
Sammobile posted the firmware yesterday.
Sent from my SM-N910T using XDA-Developers mobile app
Ok does that help out. I changed the title hope that helps, Im still new to posting files like this but Ill get the hang of it eventually. As for requesting the move I dont know how to do that.
As for sammobile, yes they almost always have it immediately but unless you have a paid subscription you'll be downloading for half the day, which is why I uploaded to a different place.
I rather run from a jaguar then go to that site.
@rbiter said:
Sammobile posted the firmware yesterday.
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
The site makes you jump through so many hoops and like I said if you dont pay for a subscription the downloads are a few hours.
Nirrik said:
The site makes you jump through so many hoops and like I said if you dont pay for a subscription the downloads are a few hours.
Click to expand...
Click to collapse
smokeingit said:
I rather run from a jaguar then go to that site.
Click to expand...
Click to collapse
Nirrik said:
Ok does that help out. I changed the title hope that helps, Im still new to posting files like this but Ill get the hang of it eventually. As for requesting the move I dont know how to do that.
As for sammobile, yes they almost always have it immediately but unless you have a paid subscription you'll be downloading for half the day, which is why I uploaded to a different place.
Click to expand...
Click to collapse
interesting. sammobile is slow but downloads usually take two hours top on good or regular days. yes, some days have had to start over a couple times so took all day because so slow and congested. was just putting it out there. sammobile isn't my first choice but it reliable and occasionally the firmware makes it there faster than here.
Thanks for the link. This is my first time seeing this link and I have google searched a bunch of them. So I googled specific to this model and I came to this link. Usually when I see xda I automatically check here first because I have had a lot of success in doing so thanks to users like yourself and many others. Keep up the good work ladies and gents.
N910t "virgin"
please, does it work with all operators ?
THANK YOU SOOOO MUCH!!!! I wanted to try out RR N on my Note 4 SM-N910T. I really love RR however during some phone calls, the caller couldn't hear me. A few other glitches. I tried all day today to switch back to stock and all the fireware I tried from SDA links failed in Odin. What a waste of a day!
Your link, even though it was mentioned was double posted, was the only one that came up in Google, and saved my phone! Thanks so much!!!!!!!!!!
Now I am just going to keep it rooted, Keep stock Rom, and use my paid version of Nova. I did like RR though. But I would rather a working phone best.
Nirrik said:
I ripped these files directly from Kies3. I supply these for anyone that needs or wants the virgin files for development or whatever. You assume all risk by using these files I offer no guarantee.
Firmware split into separate files.
AP Main ROM Platform
BL Bootloader
CP Modem
CSC Region / Carrier Data
https://mega.nz/#!wURj0QgD!KeX6dOzL1I8A18XwYvB2VuFONJlEoLbLb8iRYRV3Alk
The password to the archive is XDA601
and the MD5 Checksum is : 1f86e82f97cfa209744cb4e164ee043b
Click to expand...
Click to collapse
Thanks for this! Great to have! Appreciate it!

How to update US Samsung s7 edge while in Europe?

Hello guys! I'm kinda new here. I have this big problem. How can I update my Samsung s7 edge at&t to the latest nougat update while I'm in Europe? G935AUCS2APE1 is the baseband Version. Thanks in advance and I hope I'm in the right section.
Flash nougat with odin
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app
Thanks for the answer... Could you please be more specific maybe with a guide and where to find the right firmware? I'm not an expert unfortunately
Darklight_93 said:
Thanks for the answer... Could you please be more specific maybe with a guide and where to find the right firmware? I'm not an expert unfortunately
Click to expand...
Click to collapse
Look for a thread where you posted with BQA6 Odin files. It has a full guide.
Odin Program
http://samsungodin.com/
Odin Files
https://forum.xda-developers.com/showthread.php?p=71343011
Adb installer
https://androidmtk.com/download-15-seconds-adb-installer
Here are the files for an ATT phone. I'll link the guide too...
Can't find the link but you need to download adb installer, a Google search will bring up a quick installer, then you need to download odin, I believe the latest will work, then boot to download mode which is reboot, hold the home/volume down/and power button after the Samsung shutdown screen goes away. Put the files where they belong into odin and flash. Each file will be listed as AP, CSC, BL and I forget the 4th. Easy peasy.
Sent from my SAMSUNG-SM-G935A using Tapatalk
I can not instal Heimdall on my mac... I do not know the reason. Anyone can help me? I really do not know what to do
Darklight_93 said:
I can not instal Heimdall on my mac... I do not know the reason. Anyone can help me? I really do not know what to do
Click to expand...
Click to collapse
I haven't had the experience of hiemdall since the first Galaxy. Why don't you download the files and find a windows computer? Put them on a flash drive. No one has mentioned​ that program in these threads that I've seen.
Sent from my SAMSUNG-SM-G935A using Tapatalk
rbedell said:
I haven't had the experience of hiemdall since the first Galaxy. Why don't you download the files and find a windows computer? Put them on a flash drive. No one has mentioned that program in these threads that I've seen.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
I tried everything with two different windows laptop as well but it doesn't work... I would like to install android 8.0. I followed step by step the guide but nothing... dev_type problem.
If you want to update your (i'm just assuming) S7 Edge from AT&T you could check this link (here should've been a url link but apperently i can't attach links because i don't have 10 posts ) just search for androidfilehost on google (and search for G935A if you have an AT&T phone or search for the model number in setting s> about phone > software information > Baseband version *the first 5 are the model number*) , with all of the updates working , i am using the latest one uploaded by ITSAJUJA , they're working all you need is odin , you gotta unzip the zip file , plug in your phone ,put the files in the correct order, have the phone in downloading mode with oem unlocked and usb debugging and you're all good to go. You can also search for other models on that site . I hope i was of any help . Have fun updating !

Categories

Resources