Database Users

[Q] Recovery and Rom for Huawei U8800Pro

I have a Huawei U8800Pro bought in China and I would like to change the Rom because this is a chinese version, although I can change the language into english.
Well, the steps to follow are:
1.- Root
2.- Install a recovery
3.- Install new Rom
1. For the rooting I have red about the Super Boot. Is there any other specific system for U8800Pro to root it?
2. About the recovery, I have seen the Unofficial CWM Recovery 5.0.2.3, but I'm not sure if this is compatible with the U8800Pro or just the U8800.
3. And finally, about the new Rom, I see that the custom Roms are still developing and they are not completly compatible with Pro version, so I decided to install the official Overseas General version, instead the Chinese version that I have now. But I don't know where to get the Pro official Rom. I found the U8800 V100R001C00B136 (Overseas General version) 2011-05-17, but I'm afraid this is for the non Pro version.
Any help, please?

Hey, I have bricked U8800 PRO. Read this two themes:
[Q] [HELP] phone bricked by flashing the latest frimware from Huawei
[Q] Bricked my phone. Need help!

Well, really thank you for your answer. Then I think that I will continue with the original rom at the moment.
Does it brick with the rooting or installing the recovery as well?

Copix said:
Well, really thank you for your answer. Then I think that I will continue with the original rom at the moment.
Does it brick with the rooting or installing the recovery as well?
Click to expand...
Click to collapse
For me it worked fine the rooting and installing CWM although i had ti use superoneclick to root it as CWM I used the process of replacing the original recovery.
Sent from my IDEOS X5 using XDA App

Odinforce said:
For me it worked fine the rooting and installing CWM although i had ti use superoneclick to root it as CWM I used the process of replacing the original recovery.
Sent from my IDEOS X5 using XDA App
Click to expand...
Click to collapse
And you confirm that you have the Pro version, don't you?
Did you change the rom as well?

root an CWM
Hi,
First of all I'm a spanish user with u8800PRO (ideos X5 Movistar)
It's possible to be root user with SuperOneClick app, it's really easy.
You can check the way in this thread: http://forum.xda-developers.com/showthread.php?t=803682
For install the CVM, follow this instructions: http://forum.xda-developers.com/show....php?t=1291848
Works perfectly.
At this moment there isn't any custom ROM, we are still waiting really exciting!! I hope 2.3 official update will be at November.
Para los usuarios que hablen español, pueden consultar en este foro donde intentamos mejorar nuestros u8800Pro
http://www.forocoches.com/foro/showthread.php?t=2401965

eljenar said:
Hi,
First of all I'm a spanish user with u8800PRO (ideos X5 Movistar)
It's possible to be root user with SuperOneClick app, it's really easy.
You can check the way in this thread: http://forum.xda-developers.com/showthread.php?t=803682
For install the CVM, follow this instructions: http://forum.xda-developers.com/show....php?t=1291848
Works perfectly.
At this moment there isn't any custom ROM, we are still waiting really exciting!! I hope 2.3 official update will be at November.
Para los usuarios que hablen español, pueden consultar en este foro donde intentamos mejorar nuestros u8800Pro
http://www.forocoches.com/foro/showthread.php?t=2401965
Click to expand...
Click to collapse
Muchas gracias. Si por lo que comentáis, no hay esos problemas de brick en el rooteado con SuperOneClick, ni con la instalación del recovery CWM, igual me animo. Aunque visto el riesgo de cambio de rom, me parece que eso quedará para más adelante.
Realmente no tenía intención de ponerle una custom, si no la Overseas General version, porque tengo la versión china (con inglés). Pero es que como parece que así se le ha brickeado a muchos compañeros..., pues me conformaré con ponerle un teclado en español y adaptarlo de alguna manera, a la espera de la versión 2.3 Overseas, cuando se confirme que no brickea los terminales.
Gracias también por el enlace al foro con el hilo sobre el u8800Pro. Me registraré y lo seguiré.

Copix said:
Muchas gracias. Si por lo que comentáis, no hay esos problemas de brick en el rooteado con SuperOneClick, ni con la instalación del recovery CWM, igual me animo. Aunque visto el riesgo de cambio de rom, me parece que eso quedará para más adelante.
Realmente no tenía intención de ponerle una custom, si no la Overseas General version, porque tengo la versión china (con inglés). Pero es que como parece que así se le ha brickeado a muchos compañeros..., pues me conformaré con ponerle un teclado en español y adaptarlo de alguna manera, a la espera de la versión 2.3 Overseas, cuando se confirme que no brickea los terminales.
Gracias también por el enlace al foro con el hilo sobre el u8800Pro. Me registraré y lo seguiré.
Click to expand...
Click to collapse
gracias por la info
---------------------
thx for the info.

Moved To Q&A​

[Q] I Have The Huawei U8800-51

I Finally bought this phone, but i've got a question, my version is U8800-51, and I never heard about it. Does it make a difference at the time of installing CyanogenMod or something... ?
My Cellphone comes with FM Radio, maybe that's is the only difference between the normal version (not pro).
Has Anybody this version too?

Es por que el u8800-51 es la segunda versión del Ideos x5, que incluye radio y HSDPA+... ahora Cyanogen y esas cosas, nadie me ha contestado nada concreto...
Pero el SuperOneClick funciona de todos modos para rootear
It's because the u8800-51 its a revision of the Ideos x5, that includes radio and HSDPA+... I don't have any information about someone installing Cyanogen and that stuff... But SuperOneClick works on this phone.

Ok, Thanks !
Ok, Gracias !
Al momento de hacer root se pierde la Garantía?
When you root, do you lose the warranty?

OhMyJx said:
Ok, Thanks !
Ok, Gracias xD y saludos
Al momento de hacer root se pierde la Garantía?
Click to expand...
Click to collapse
En teoria se pierde la garantia si lo llevas asi donde lo compraste, por suerte es reversible, solo tienes que reflashear una rom stock y listo tendra el bootloader de fabrica nuevamente, ergo no te van a negar la garantia.
Mas adelante subire una rom del u8800-51 stock y version internacional.
Sent from my U8800Pro using XDA App

:O Gracias!
:O Thanks!
Otra cosa, para rootear tengo que usar el SuperOneClick más reciente o aquella versión que tiene el exploit rageagainstthecage (o algo así)?
Another question, to root, do I have to use SuperOneClick, which version? the recent or that one that has the rageagainstthecage exploit?

Hola
Yo igual tengo ese modelo. Lo compre hace poco, al usar SuperOneClick ¿se pierden los contactos?¿hay que hacer algun respaldo?¿se formatea algo en el proceso?
Saludos.
Hello
Me too I have that model. I bought recently, using SuperOneClick contacts do you lose? Is there to do some backup? Something is formatted in the process?

Rootear U8800-51
OhMyJx said:
:O Gracias!
Otra cosa, para rootear tengo que usar el SuperOneClick más reciente o aquella versión que tiene el exploit rageagainstthecage (o algo así)?
Click to expand...
Click to collapse
Hi, the version SuperOneClickv2.1.1 http://forum.xda-developers.com/showthread.php?t=803682) works perfectly. Just Root and reboot the phone. For a new ROM, first I want the Entel ROM 2.2.2 for backup (U8800-51V100R001c178B025SP05) to not lose the 3G band.
(Este teléfono es muy nuevo y aun no me arriesgo a ponerle otra ROM, aunque estoy desesperado por tener el Gingerbread 2.3.5 )

Un aviso, no trates de aplicar la actualizacion de firmware que esta en el sitio de huawei,tengo entel y acabo de brickear el mio de esa forma.
A little warning, don't aply the firmware update from de huawei site,i have entel and just bricked my phone doing that.

You dont lose anything, its just rooting... BTW last week ive unrooted my phone with SuperOneClick also, in case you need it some day...
No se pierde nada, solo es rotearlo... A proposito, la semana pasada desrootie mi telefono con SuperOneClick, en caso de que lo necesitaras...

Gracias por las respuestas, y cuánto les dura la batería mas o menos a ustedes?
Ya le hice root, en SuperOneClick, está la opción de Unroot, funciona? entonces así no se perdería la garantía cierto? o igual?, en realidad no me interesa mucho la garantía, tuve un GW620 y no le ha pasado nada aún, pero igual uno nunca sabe... xD
Thank you all, and long lasts does the battery for you?
I already rooted it with SuperOneClick, there is the option of Unroot, does it work?

OhMyJx said:
Gracias por las respuestas, y cuánto les dura la batería mas o menos a ustedes?
Ya le hice root, en SuperOneClick, está la opción de Unroot, funciona? entonces así no se perdería la garantía cierto? o igual?, en realidad no me interesa mucho la garantía, tuve un GW620 y no le ha pasado nada aún, pero igual uno nunca sabe... xD
Click to expand...
Click to collapse
This is an English speaking forum
Sent from my u8800 using xda premium

And we do speak english, but sometimes you gotta do it in your native language in order to explain very well the processes / consequences of not doing things right, doing things that you should not, etc...
But thanks we will keep it in mind.
Sent from my U8800Pro using XDA App

OhMyJx said:
Gracias por las respuestas, y cuánto les dura la batería mas o menos a ustedes?
Ya le hice root, en SuperOneClick, está la opción de Unroot, funciona? entonces así no se perdería la garantía cierto? o igual?, en realidad no me interesa mucho la garantía, tuve un GW620 y no le ha pasado nada aún, pero igual uno nunca sabe... xD
Click to expand...
Click to collapse
A mi me dura alrededor de un dia y medio, con uso medio, recuerda que la bateria de los u8800 y pro aunque sean de 1500mAh son de polimero de litio no de iones o sea que son mejores.
Deberia funcionar el unroot, o en caso contrario flashear una stock rom con el metodo de Huawei y listo.
Sent from my U8800Pro using XDA App

Hayden18 said:
This is an English speaking forum
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
Yes and Sorry, but I couldn't have explained better.
Now all my posts are in both languages, but not completely translated.

Has somebody recovery files, i can't pass the boot animation...

Send me an email. I have a backup of the IMG files.

Te mandé un mensaje, es que no tengo tu email.
I've PMed you, 'cause i haven't your email.
Thank you !

Still want the IMG Files
OhMyJx said:
Te mandé un mensaje, es que no tengo tu email.
I've PMed you, 'cause i haven't your email.
Thank you !
Click to expand...
Click to collapse
I send you a PM with my email. Tell me if you still want the files.

No puedo poner el recovery osea puedo, pero la no bootea, se keda pegado en el logo d entel cuando trato d entrar al recovery, cachan como hacer en ese caso?
I cant install the recovery...

Hi, does anybody have the stock rom for this phone for ENTEL? I want to try and install new roms, but i need a good backup first. If you can explain how to get it manually from my phone, it would also work ok for me.
Also, the other roms, like MIUI are worknig ok on this phone or not??
---------------------------------------
Hola, alguien sabe tiene el stock rom para este telfono para ENTEL? quiero tratar de instalar un nuevo rom, pero necesito tener un archivo de respaldo primero (uno bueno). Si pueden explicarme como obtenerlo manualmente desde mi telefono tambien me sirve.
Ademas, alguien sabe si los otros roms como los MIUI funcionan bien en este modelo o no?

[Q] Deodexing stock rom (P708g)

Hello everyone
I know there are already some roms that come pre-rooted and deodexed, but since my phone model is different (p708g) they are not compatible, so im now trying to do it myself.
I have recently managed to root the V20A (p708g) version by copying the necessary files from the rom made by Homero (all credits to him)
"[ROM KDZ] V20A_00 Jelly Bean L7 | ROOT | CWM | Unlock Booloader | by Homero". and following one tutorial here in XDA I could apply the unlock bootloader and flash CWM. I also enabled Init.d support using an app i found also in XDA. so the next step for me is to deodex the rom, so i can customize it more and apply other scripts such as Supercharger V6.
My intention is to be able to create a custom rom that include all that; root, unlock bootloader, CWM, init.d support, and deodexed. and share it with the other P708g (mexico) users.
So again, i need to know how can i Deodex the rom. I have read many posts and most of them use a tool called "Xultimate", but it havent worked for me, so im searching for some other way to deodexit. Any help is wellcome, im not asking for a step by step instruction (but is also wellcome), I just want to gather as much information as i can about it
Hope you guys can help me.
Thanks!!

Muy bien te felicito ojalá y logres tu cometido ya que para el p708g no han sacado nada saludos

i'm trying to make a carrier-crap-free stock for 708g, but i have some error while making the kdz, can you help me please?

h4x0r007 said:
i'm trying to make a carrier-crap-free stock for 708g, but i have some error while making the kdz, can you help me please?
Click to expand...
Click to collapse
I have no experience making a KDZ, what i do is basically extract the system.img.ext4, then mount it on linux, add/remove/modify files, then replace the system.img.ext4 while flashing the original KDZ
with this method, i was able to modify my stock rom(V20A-jellybean) to include: root+CWM+init.d+deodexed, and trying to add some more tweaks (transparent notificatins bar, themes, etc)
i will upload a cwm backup from my rom in a couple of days, so you can flash it to your device. So if you're interested just wait for it
P.D
maybe you can share with me what do you know about making a KDZ and we can work together with this rom :good:

I think I speak through all mexicans (who own an lg l7) by saying thank you for this lol but how is it going with the deodexing? any progress? i found this tutorial to deodex http://goo.gl/SqgbV hope it helps you!

algebraik said:
I think I speak through all mexicans (who own an lg l7) by saying thank you for this lol but how is it going with the deodexing? any progress? i found this tutorial to deodex http://goo.gl/SqgbV hope it helps you!
Click to expand...
Click to collapse
Im glad to say, i made it!
i managed to deodexit using the android kitchen, so far so well, everything works good. the main reason i wanted to deodexit was to be able to use the supercharger v6 script, and it worked, now im trying to take what i did and make a KDZ rom, but im having some problems.
also, as you may know, in order to make the supercharger script work, init.d suppourt is needed, as well as patching the "services.jar", i also managed to do that, but only after flashing the rom (via replacing the "system.img.ext4" during flashing the original kdz), so im trying to find a way to include that also in the KDZ file, but i haven't been lucky.
Im also trying to include some mods, sucha as transparent notificantion area, and a button to "reboot recovery" in the power menu, but im new with all this, so i think im not going to include that yet
it's been a very busy week so i haven't work on it as much as i want, but the progress is still going, just be a little bit more patience, im not giving up on this

vashminted said:
Im glad to say, i made it!
i managed to deodexit using the android kitchen, so far so well, everything works good. the main reason i wanted to deodexit was to be able to use the supercharger v6 script, and it worked, now im trying to take what i did and make a KDZ rom, but im having some problems.
also, as you may know, in order to make the supercharger script work, init.d suppourt is needed, as well as patching the "services.jar", i also managed to do that, but only after flashing the rom (via replacing the "system.img.ext4" during flashing the original kdz), so im trying to find a way to include that also in the KDZ file, but i haven't been lucky.
Im also trying to include some mods, sucha as transparent notificantion area, and a button to "reboot recovery" in the power menu, but im new with all this, so i think im not going to include that yet
it's been a very busy week so i haven't work on it as much as i want, but the progress is still going, just be a little bit more patience, im not giving up on this
Click to expand...
Click to collapse
Dude! that is awesome, looking forward to this! keep up the good work!!! DD

como te fue?
Hola amigo queria saber si lograste hacer todo el procedimiento cuento igual con un p708g de mexico y me interesaria tu rom deodex si pudieras compartirla muchas gracias de antemano saludos: Bueno:

juan domex said:
Hola amigo queria saber si lograste hacer todo el procedimiento cuento igual con un p708g de mexico y me interesaria tu rom deodex si pudieras compartirla muchas gracias de antemano saludos: Bueno:
Click to expand...
Click to collapse
Hi.
I did finish that ROM, but almost at the same time CM10 began to be compatible with P708 model, so I never published the ROM.
honestly it was nothing special compared to cm10. And now we have CM10.2 and slimbean with support for p708 (well, almost)
I don't know if I still have all the files I used to make the deodexed rom. if you really prefer to use a stock rom I could take a look and see if i can make it again, but I suggest you to try a newer rom, CM10.2 by cr3pt, is a good choice
Hola
Sí, termine esa rom, pero casi al mismo tiempo CM10 empezó a ser compatible con el modelo P708, asi que nunca publique la rom.
Honestamente no era nada especial comparada a CM10, y ahora tenemos CM10.2 y Slimbean con soporte para el P708 (bueno, casi)
No se si aun tengo todos los archivos que use para hacer la rom deodexada. si realmente prefieres usar la rom de fabrica, podria ver si puedo velver a hacerla, pero te sugiero probar una rom mas nueva, CM10.2 de cr3pt, es una buena opcion.

gracias por responder
vashminted said:
Hi.
I did finish that ROM, but almost at the same time CM10 began to be compatible with P708 model, so I never published the ROM.
honestly it was nothing special compared to cm10. And now we have CM10.2 and slimbean with support for p708 (well, almost)
I don't know if I still have all the files I used to make the deodexed rom. if you really prefer to use a stock rom I could take a look and see if i can make it again, but I suggest you to try a newer rom, CM10.2 by cr3pt, is a good choice
Hola
Sí, termine esa rom, pero casi al mismo tiempo CM10 empezó a ser compatible con el modelo P708, asi que nunca publique la rom.
Honestamente no era nada especial comparada a CM10, y ahora tenemos CM10.2 y Slimbean con soporte para el P708 (bueno, casi)
No se si aun tengo todos los archivos que use para hacer la rom deodexada. si realmente prefieres usar la rom de fabrica, podria ver si puedo velver a hacerla, pero te sugiero probar una rom mas nueva, CM10.2 de cr3pt, es una buena opcion.
Click to expand...
Click to collapse
HOLA MI AMIGO GRACIAS POR RESPODER! quisiera saber que tal anda la rom cm10.2 ya que la tengo al igual el kernel pero no la eh probado ya que me marco un error al instalarla pero me dijeron que se soluciona borrando una linea de updater script mas aun no lo eh hecho ahorita ando en cm10,1 s4 pero me gustaria saber que beneficio tiene la rom cm10.2 ya que en la que ando se drena muy rapido la bateria espero tu respuesta

juan domex said:
HOLA MI AMIGO GRACIAS POR RESPODER! quisiera saber que tal anda la rom cm10.2 ya que la tengo al igual el kernel pero no la eh probado ya que me marco un error al instalarla pero me dijeron que se soluciona borrando una linea de updater script mas aun no lo eh hecho ahorita ando en cm10,1 s4 pero me gustaria saber que beneficio tiene la rom cm10.2 ya que en la que ando se drena muy rapido la bateria espero tu respuesta
Click to expand...
Click to collapse
Try to post in english only, as is one of the forum rules, if you don't know enough english to write a post you should use private messages, otherwisse moderators could delete your posts.
The main advantage on CM.10.2 by cr3pt, is that NFC is disabled at kernel level, that means that the battery is not drained like in other ROMS I have more than 15 hours of battery life with normal usage.
the main disadvantage is that the camera is working with 6 mp only.
Trata de postear solo en ingles, ya que es una de las reglas del foro, si no sabes suficiente ingles para escribir un post deberias usar los mensajes privados. de otro modo los moderadores podrian borrar tus posts sin previo aviso.
la mayor ventaja de la CM10.2 de cr3pt, es que el NFC esta desactivado a nivel de kernel, lo que significa que la bateria no es drenada como en otras roms. a mi me da mas de 15 horas de bateria con un uso normal.
la mayor desventaja es que la camara funciona solo a 6 mp.

im sorry
vashminted said:
Try to post in english only, as is one of the forum rules, if you don't know enough english to write a post you should use private messages, otherwisse moderators could delete your posts.
The main advantage on CM.10.2 by cr3pt, is that NFC is disabled at kernel level, that means that the battery is not drained like in other ROMS I have more than 15 hours of battery life with normal usage.
the main disadvantage is that the camera is working with 6 mp only.
Trata de postear solo en ingles, ya que es una de las reglas del foro, si no sabes suficiente ingles para escribir un post deberias usar los mensajes privados. de otro modo los moderadores podrian borrar tus posts sin previo aviso.
la mayor ventaja de la CM10.2 de cr3pt, es que el NFC esta desactivado a nivel de kernel, lo que significa que la bateria no es drenada como en otras roms. a mi me da mas de 15 horas de bateria con un uso normal.
la mayor desventaja es que la camara funciona solo a 6 mp.
Click to expand...
Click to collapse
I'm so sorry but my English is not good even so somehow I will try to respect their rules to not bother thank you very much for your information and attention that I do appreciate your prompt response is right now I'm testing the rom hope it's as good as you I said greetings and thanks

can anyone upload a deodexed rom for lg l7 p708g??
ive been looking for a deodexed rom for my lg l7 p708g but i havent found anything whatssoever of the sorth...can anybody please help me or upload one?

There are many roms for p708g already you can search on the forum

KitKat in Gionee Elife E7, very easy!!

Bueno pues después de unos días intentándolo, por fin lo he conseguido y lo comparto con todos vosotros.
Requisitos:
1º Teléfono ROOTEADO.
Este es KingUser, para Android:
Link removed by VECTUS
Y este Shuame para Android:
Link removed by VECTUS
2º Instalar la apk RASHR (Para cambiar de Recovery)de AQUÍ:
Link removed by VECTUS
3º Bajar la siguiente Custom Rom AQUÏ:
Link removed by VECTUS
4º Bajar el siguiente RECOVERY de AQUÍ (con este podemos instalar la Custom Rom de arriba, desde cualquier otra):
Link removed by VECTUS
Hay que descomprimirlo, por supuesto, así no nos sirve!!
Comenzamos...
Pasamos todos los archivos a la memoria SD del teléfono, en la raíz o en carpeta, como queráis.
Una vez tengamos rooteado el teléfono, si no lo está podéis hacerlo con varias aplicaciones, bien desde el PC (Yo he utilizado muchas veces "Shuame") o desde el móvil.
No tengo ahora mismo los programas necesarios, en cuanto pueda los pongo para los que no tengáis el teléfono ROOT.
1-1 Una vez instala da la apk RASHR, la abrimos y presionamos el primer botón u opción que aparece, nos avisa de algo y aceptamos. Nos aparece o debería, un buscador o la opción para buscar dentro de la memoria del teléfono, buscamos el recovery que hemos descargado y copiado (por supuesto descomprimido) lo seleccionamos y aceptamos. Ya está instalado, ya desde ahí nos pregunta si queremos reiniciar en modo Recovery, aceptamos.
1-2 Una vez dentro del modo Recovery, lo primero que vamos a hacer es un BACKUP de todo el sistema. Es muy visual y fácil (muy importante, si no sabéis que hace cada opción NO TOQUËIS NADA!!! preguntar antes.
pues eso opción BACKUP seleccionamos todos los archivos y deslizamos para que comience.
2-1 Una vez termine, no hace falta reiniciar ni nada por el estilo. le damos hacia atrás en la flecha de abajo, y vamos a hacer TODOS LOS WIPES.
-Botón Wipes, Botón Advanced Wipe, y ahí escogemos las 3 primeras opciones Wipe cache, Dalvik y Data.
-Nuevamente deslizar y que comience el Wipeoooo!!
2-2 En cuanto termine, flecha hacia atrás y escogemos el botón INSTALL. Buscamos la Rom en zip dentro de la memoria del móvil, la seleccionamos, deslizamos nuevamente... y a esperar... (mordiéndonos las uñas, si lo deseamos )
En el momento en que todo acabe... (puede tardar más de lo que esperáis, pero es que está instalando el nuevo SO) Reiniciamos y ....
Bienvenidos a KitKat 4.4.2 para GIONEE ELIFE E7 !!!
Como veréis lo primero que aparece es la opción para seleccionar idioma, solo inglés.
En cuanto acabéis de configurar lo que os pregunta, se instalará automáticamente el ROOT en vuestro teléfono.
Para ponerlo en español os vais a PLAY STORE, os bajáis Morelocale2, y desde este programa ponési el español o el que queráis como idioma de vuestro sistema. La verdad es que traduce casi todo.
Y si queréis instalar las aplicaciones que teníais antes de actualizar, arrancáis de nuevo en modo Recovery. (Reiniciamos y pulsamos Volumen+ hasta que vibre, ahí ya se puede soltar el botón de volumen).
Seleccionar Botón RESTORE, marcamos SOLO la casilla DATA, deslizamos y todas nuestras aplicaciones, volverán a lucir en nuestros escritorios...
Creo que ya está todo, cualquier duda, intentaré responder
CRÉDITOS A:
TFandroid Developers por su estupendo RECOVERY.
PITTECH forum of Turkey por su estupenda ROM.
Y a todos los que se me olvidan por su ayuda!!

Custom rom?
First of all, on opening the link, it is aking for decryption password.
Also, could you be please more clear on the below:
1. Whether it is a custom rom or the Indian rom.?
2. The link for the recovery provided is for Kitkat.?

nileSin said:
First of all, on opening the link, it is aking for decryption password.
Also, could you be please more clear on the below:
1. Whether it is a custom rom or the Indian rom.?
2. The link for the recovery provided is for Kitkat.?
Click to expand...
Click to collapse
The link works smoothly and is not encrypted
1- Is the Indian Rom, clean of unnecessary applications
2- This serves to install Recovery from any Rom Gionee

hackvier1 said:
The link works smoothly and is not encrypted
1- Is the Indian Rom, clean of unnecessary applications
2- This serves to install Recovery from any Rom Gionee
Click to expand...
Click to collapse
Sorry, but I meant, the links posted by @shera_lion22 asks for decryption password.
You mean the recovery will work on any all the android versions of E7.

nileSin said:
Sorry, but I meant, the links posted by @shera_lion22 asks for decryption password.
You mean the recovery will work on any all the android versions of E7.
Click to expand...
Click to collapse
Yes, but the system rooted!

Perfect!!! I installed it easily, thank you. Only a doubt. I create a backup but if I want to restore data by Restore with TWRP I can't. It doesn't found any backup folder, but I can see it in sdcard. Any ideas? Thanks a lot again for the update.
P.s. Camera quality is worst than before

empedocle86 said:
Perfect!!! I installed it easily, thank you. Only a doubt. I create a backup but if I want to restore data by Restore with TWRP I can't. It doesn't found any backup folder, but I can see it in sdcard. Any ideas? Thanks a lot again for the update.
P.s. Camera quality is worst than before
Click to expand...
Click to collapse
The instructions say you should do first of all a backup, with wl Cwm I put into the post. I did so and restored li data applications and me was perfect.

hackvier1 said:
The instructions say you should do first of all a backup, with wl Cwm I put into the post. I did so and restored li data applications and me was perfect.
Click to expand...
Click to collapse
I did. Backup is infact in TWRP folder in sdcard but if I reboot in recovery mode, I can't restore nothing. I can't see any path..

empedocle86 said:
I did. Backup is infact in TWRP folder in sdcard but if I reboot in recovery mode, I can't restore nothing. I can't see any path..
Click to expand...
Click to collapse
You know that you can select the Sd in the top menu of recovery?

ROM I have prepared did you sharing my permission?
Please remove the link !!
 @hackvier1

oznprlk said:
ROM I have prepared did you sharing my permission?
Please remove the link !!
@hackvier1
Click to expand...
Click to collapse
Why don't YOU share with us my friend !!
YOU should of done it before !!!

One of our rules here is to use the English language. Also use your own work or ask others to use theirs and credit them in the thread after gaining permission to use said work. Thread closed and links removed...

Marshmallow 6.0.1 Upgrade for Moto Maxx in México

Finally, today I was able to execute the system upgrade to my Moto Maxx. The mobile was never modified, it was bought at retail store and has been used with Telcel carrier in México. In the next posts I will share the screen captures of download and upgrade process.

First I will share the official announcement from Motorola about Marshmallow upgrade release for Moto Maxx in Latam
https://motorola-global-es-latam.cu...detail/a_id/110573/p/30,6720,9278/reg/3103597
The notice was posted last Sunday, July 17th of 2016. Since then, I wasn't able to get the upgrade option until Tuesday, July 19th at 5 pm CST.

Hi ddaza.
Alguna idea de como actulizar si tenía mi cel en Root (bootloader). Porque actualmente me manda error por este motivo ...
Gracias!

VictorBenitez said:
Hi ddaza.
Alguna idea de como actulizar si tenía mi cel en Root (bootloader). Porque actualmente me manda error por este motivo ...
Gracias!
Click to expand...
Click to collapse
Si tenías root tienes que esperar a que salga el firmware completo
O regresar al firmware completo anterior y aplicar la actualiAcion ...
Enviado desde mi Nexus 6P mediante Tapatalk

gierso said:
Si tenías root tienes que esperar a que salga el firmware completo
O regresar al firmware completo anterior y aplicar la actualiAcion ...
Enviado desde mi Nexus 6P mediante Tapatalk
Click to expand...
Click to collapse
definitivo, esto sería la mejor opción, en el foro están los ROMS originales para regresarnos a una versión anterior a la modificación que aplicamos.

These are the upgrade screenshots that I'd promised

My system, is the last soak test 4, and... I don't know if i have to install the final version of MM
Is the chop chop feature active in the final version? Can anybody say something about that?
Thank's in advance
Sorry for the english, I'm latin

gierso said:
Si tenías root tienes que esperar a que salga el firmware completo
O regresar al firmware completo anterior y aplicar la actualiAcion ...
Enviado desde mi Nexus 6P mediante Tapatalk
Click to expand...
Click to collapse
Entonces si flasheo el bootloader, recovery y boot del firmware anterior no funciona?

Quetzalfp said:
Entonces si flasheo el bootloader, recovery y boot del firmware anterior no funciona?
Click to expand...
Click to collapse
Por ahí en mi dropbox tengo la versión final de marshmallow empaquetada en un zip, si tienes bootloader abierto, y supongo que te sabes mover con la consola de windows para fastboot, entonces no será problema flashear los archivos contenidos en el zip.
Tal zip lo subí apenas lo bajé hace no muchos días. Yo no lo he puesto porque como ya he mencionado, tengo la última soak test 4, y como ya la tengo a modo personalizada, esto es: root, viper4android, custom kernel, "karatazo" para la lámpara activado, gravity box, liteada, etc, etc ... Pues me da un poco de pereza hacer el proceso de meter los comandos e instalar todo...
Como fuere, les dejo el enlace de la rom oficial final MM 6.0.1
XT1225_QUARK_RETBR_6.0.1_MPG24.107-70.2_cid12_subsidy-DEFAULT_CFC.xml.zip

People, use english please.
It is not everyone that understands spanish.

veccini said:
Por ahí en mi dropbox tengo la versión final de marshmallow empaquetada en un zip, si tienes bootloader abierto, y supongo que te sabes mover con la consola de windows para fastboot, entonces no será problema flashear los archivos contenidos en el zip.
Tal zip lo subí apenas lo bajé hace no muchos días. Yo no lo he puesto porque como ya he mencionado, tengo la última soak test 4, y como ya la tengo a modo personalizada, esto es: root, viper4android, custom kernel, "karatazo" para la lámpara activado, gravity box, liteada, etc, etc ... Pues me da un poco de pereza hacer el proceso de meter los comandos e instalar todo...
Como fuere, les dejo el enlace de la rom oficial final MM 6.0.1
XT1225_QUARK_RETBR_6.0.1_MPG24.107-70.2_cid12_subsidy-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks. I'll give it a try.
@mirdones. I was asking if I can apply the OTA after flash the stock bootloader and recovery from a previous firmware, as I already have root in my phone.

¿Sabe usted cómo instalar sobre CM13?

bigjailerman said:
¿Sabe usted cómo instalar sobre CM13?
Click to expand...
Click to collapse
¡Oh sí! Usted debe flashear con comandos vía consola CMD de windows y con la última rom stock, misma que mensajes atrás he dejado el enlace para descarga.

Graz!

Entendemos español los Mexicanos que tenemos un Moto Maxx
Enviado desde mi Moto MAXX mediante Tapatalk

fenix3nk0r3 said:
Entendemos español los Mexicanos que tenemos un Moto Maxx
Enviado desde mi Moto MAXX mediante Tapatalk
Click to expand...
Click to collapse
Despite being a thread for the update of Moto Maxx in Mexico, this is not a mexican forum, but an international one.
I believe you all understand and can write and read in english, so why create a gueto only for you?
Besides, I also believe it is in the forum rules that everything should be written in english.

I'm currently on 5.0.2 and having problems to update to MM. My Moto maxx is rooted and have trwp recovery. I'm from Mexico and any help will be greatly appreciated.

dcotarobles said:
I'm currently on 5.0.2 and having problems to update to MM. My Moto maxx is rooted and have trwp recovery. I'm from Mexico and any help will be greatly appreciated.
Click to expand...
Click to collapse
Do as i did, download the the previous OTA (posted in some message above) to return your phone to stock and you good to go to receive the OTA.

mirdones said:
Despite being a thread for the update of Moto Maxx in Mexico, this is not a mexican forum, but an international one.
I believe you all understand and can write and read in english, so why create a gueto only for you?
Besides, I also believe it is in the forum rules that everything should be written in english.
Click to expand...
Click to collapse
If we create a gueto as a mexicans...
You as a brazilian man must to create a Favela
So, we can create a Mexican Barrio, but never a "Gueto"

Quetzalfp said:
Do as i did, download the the previous OTA (posted in some message above) to return your phone to stock and you good to go to receive the OTA.
Click to expand...
Click to collapse
I have the same issue, root in my phone and I can´t update via OTA to Android 6. Which will be the best release for flash my phone and could make the OTA update?
My phone is mexican