S8530 camera problem - Bada Software Development

hi
phone was working ok with xxkf1 version,i just tried to change language to arabic while flashing it stopped at writing boot with Ddl Erase Err message
iam still able to get to download mode
i tried with all fw versions but still the same error
at last i tried some custom flash and now phone powered on but the problem is camera failed when i open camera
can anyone give me solution
thx in advance

No way your camera dead, this is one thing we talk about never flash a camera firmwarein S8530. Are you flashing your camera firmware ?

no i did not flash camera fw i flashed the phone to change lang it had initially xxkf1 then camera failed

Related

Atom Pure GSM Signal Problem ! Help !

I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.

How to reflash rom by micro SD

Hi
I try to reflash my touch dual from NL to CHT, but.....
It looks I forgot to unlock the CID and the reflash programe has stopped on 14%, after that I only can get in the "3 color screen" ...
I try to down a lot of different version Niki's ROM ( also tried 'wizard_romupgradeutility_noid' ) but all of them has hand on 1% or even just report the Erroe [294] : invelue Ventor ID ...
As I learn from xda, it looks only reflash the ROM by miro SD can solve my problem, but I can't found any information regarding how to make the reflash function micro SD for NIKI ....
Anybody can help ..... :'(
Please ...... anybody can help....
As far as i know, you can't reflash your rom by microsd. The only option you have is to wait until valvarin has finished his unbricker. Still, I don't know when the unbricker is finished. Sorry for the bad news. Maybe the gurus have an idea. Keep your hopes high and succes!
What I can do now ???
At this moment, my touch dual only can start to "3 color screen" mode, and also can strat a ROM reflash programme but never can be 100% finish... ( Erroe [294] : invelue Ventor ID / system hang ) ...
Or is possible if I flash back the original ROM ???
Does anybody have the original HTC Dutch ROM from T-mobile ???
Reflash from rom
Hi , I have the same problem also would like to reflash from the sd card as my hermes 200 freezes on the win start screen , still running windows 5 . Hard reset does not work , just back to win start screen . Please let me know if you have some success . Thanks
http://forum.xda-developers.com/showthread.php?t=495262

[Q] camera not working after so many time flashing ROM

i've used blackSTONEhenge for about a year++...
flashed my HD from ver 1 till the latest v3.4..
it's been the best ROM i've used i think... thanks...
however, after installed the V1.6, i cant use my camera.
click at the camera button, but nothing happens.
i've re-flashed beck to SPL 1.14, n install the stock ROM,
the button works, but after a while error message appeared.
it says "problem with device.exe"...
can somebody help me? how can i repair my camera?
hi! i have the same problem, but still can't solve it. Someone says that it's because of dieing motherboard, and only official service can repair the device by replacing motherboard. But i can't understand how flashing the rom can cause damage to the motherboard.

Help please usb problems :/

Hello guys,
I was flashing a lot of different roms and next morning I tried pluging my usb in and a error came up saying its not recognised and I have installed kies but what do i do with it im actualy stuck :/ also when I charge my phone from dead and go to my music player it says low battery but its charging though I think heres proably a file missing in my system but when I flash a rom still the same problem occours
Can some one help me I will be forever gratefull ?????
On what rom you are now?
Try to flash a stock ROM with 3 files plus PIT file ( pda, modem, csc and pit file) from samfirmware.com . This way I solved many of my problems ( partition/battery status/ imei problems) after flashing different custom ROM's.

Samsung s3neo camera issu

Hi all !
I have just flashed my phone successfully but when i try to open my camera ,it shows a black screen and an warning message
' server error restart camera " or in french ( une erreur serveur est survenue ,redemarer lappareil photo )
thnk you
Hi, I had a same issue fixed today. If you where flashingn through odin, or after a another rom back to stock you should read my threat :
http://forum.xda-developers.com/galaxy-s3-neo/help/samsung-galaxy-s3-neo-camera-server-t3336402
also if this doesnt help you can try installing the I9301IXXUANH1 PDA version. Looking forward to hear from you.
Try to check my thread about solving all the problems with camera on S3 Neo.
Hope it works
Thank you all !
i have just fixed this issu , so this is how i did
i installed a custom recovery (TRWP)
and then a flashed a camera fix file that you will find in attached file

Categories

Resources