[Q] A2DP Bluetooth headset microphone - Windows Mobile Development and Hacking General

I have connected an A2DP platronics bluetooth headset to my WM6.5 device. I then set the Stereo profile.
All the sound played is routed to the headsets speaker fine.
My tests confirmed that the microphone works fine in phone calls made with the device. However, the microphone is not seen as a Windows microphone.
So using sound recorder and other voice applications are not using the headsets microphone but are use the handsets one.
Can this issue be resolved?

Related

sound via BT | only phone sound works | PDA sound does not

I just paired my BT headset with my Wizard and it works fine for phone calls, but it won't work for the sound coming from Windows, which still comes via the handsfree speaker of the device.
Is there any possibility to get the Windows sound on the BT headset?
As of right now, it is still under works as A2DP is required to have the sounds from Windows processed to a BT headset. People using the Magician have had luck and we can now listen to WM10 through our BT stereo headset.
There are two main problems:
1. Getting A2DP set correctly so that everyone can enjoy it.
2. Having it work in mono based BT Headsets.
Mono is not problem for Wizard:
http://www.pdaphonehome.com/forums/showthread.php?threadid=54951&perpage=20&pagenumber=1
Stereo (means A2DP) is not available yet.

BT plantronics

I have noticed that I cannot call via Raphael usually when BT headset is activated.
I hear no any calling sound. is it normal or some bug?
It is differen t when use car kit...

A2DP & Headset problem

Has anyone had any issues while having A2DP enabled getting a phone call to work through the same device?
I am using a T505 and if I disable A2DP I can make audio calls, but when I have A2DP enabled I can not hear audio nor can the person hear me through the device.
I was having this problem with my Jabra headphones, but it started working after I rooted and flashed Damage Control.

Bluetooth headset functionality broken since KF1...

Hi Guys,
I have upgraded to Litening ROM 2.1 recently and my bluetooth is still not properly handled by i9100.
I used to be able to skype using bluetooth headset, both the mic and head phones were working, but each firmware after KF1 has successfully broken it.
Since then, bluetooth headphones work fine, however the microphone on the headphones does not transmit sound to the other party, that is when using Bluetooth for skype talks.
Bluetooth headset works normally for regular phone calls, though, both speakers and microphone on the headset.
Can anyone confirm it on their headsets and if you know anything about this (potential fix or other info), can you share?
Thanks.

Nexus 4 won't route audio to Nokia BT headset

I use the BT headset Nokia BH-216 for incoming/outgoing calls while driving. Nexus 4 is not routing the audio to the BT headset for the calls.
This issue is seen sometimes. Sometimes the audio gets routed to the BT headset as expected, and I can talk freely on the headset. But few times the audio does not route to the BT headset, and in these cases I have to use the phone speakers.
Is this a known issue in Nexus4? My HTC Sensation never had this issue.
Note: I'm using the stock ROM and my device is up to date.
webgenius1 said:
I use the BT headset Nokia BH-216 for incoming/outgoing calls while driving. Nexus 4 is not routing the audio to the BT headset for the calls.
This issue is seen sometimes. Sometimes the audio gets routed to the BT headset as expected, and I can talk freely on the headset. But few times the audio does not route to the BT headset, and in these cases I have to use the phone speakers.
Is this a known issue in Nexus4? My HTC Sensation never had this issue.
Note: I'm using the stock ROM and my device is up to date.
Click to expand...
Click to collapse
Deffinetly a known issue. A reboot usually brings it back online (for me anyway).
Hopefully 4.3 will address this problem

Categories

Resources