Database Users

[Q] Really Bricked Defy

Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)

Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.

I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english

Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.

Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!

I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?

Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...

bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help

MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help

Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom

try to flash sbf use rsd

If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.

if sbf doesnt work u better send it to warranty

Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)

If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.

white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.

I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope

Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD，the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.

Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me

wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy

[Q] [HELP] Defy is bricked, PC doesn't recognize it

Hi everybody
I have Motorola Defy, but after I plug in the usb cable to defy and PC , rsd lite 4.9, 53.1. or 5.5 doesnt recognize my device..
After plug in it shows only white led and nothing more, nothing at all...
I tried every method , but unsuccessfull...
Everytime i try tu plug in, it just shows white led, nothing more, screen is black, and PC doesnt recognize it at all...
What should I do to unbrick it ???
Pls help, I'm desperate ... Thank you
PS: I tryed every method, I searched almost everywhere

When you plug it in first make sure battery full charge then load rsd lite and under settings change it to first come first serve. I had same issue and this worked.
Sent from my MB501 using Tapatalk

I'm having the same issue.hopefully it works I'll get back to you after that
Sent from my SGH-T989 using Tapatalk

Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.

yuffany said:
Have you tried entering bootloader and then connect the phone to PC? I got RSD lite recognizing my phone this way.
Click to expand...
Click to collapse
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...

djmajino said:
I can't power up the phone, I can't enter boot menu or even download mode, nothing, before brick: I just plug usb into phone and usb and i could flash througt rsd whatever I want to but now I plug the usb cable into a phone and PC dooesn'r recognize my defy...
Just white led and black screen...
Click to expand...
Click to collapse
??
Have you tried my suggestion.. I had same issue.. black screen with white lite.. you need to have full battery then plug the phone in and run rsd lite with settings on first come first serve..
if
your phone does load with a full charge then hold volume up and power button to get into the bootloader menu.. after than then plug into rsd lite..
to make things easy let us know what happens after you put a batter with full charge on it.. then we can go from there..

yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??

Check the drivers
Sent from my GT-P1000 using xda premium

djmajino said:
yes , I have full battery, I set the rds lite to option firt-come-first-serve, but nothing happend
I can't get into bootloader, I can't power the phone up, I can't get into mode... Nothing
Still the same probem, still not solved, Any idea what could be with it ??
Click to expand...
Click to collapse
try these steps..
take phone battery out and wait few seconds..
then put batter back in and hold volume up and power button for few seconds.. let go of power button and then let go of volume up button..
your phone screen will still be black and no light will be lit up..
then connect usb cable to phone then to pc.. after that you load up RSD lite with the setting of first come first serve.. you should see a line in middle of window that says.. "connected" at this point your phone might display white light ..it sometimes doesn't but as long as rsd lite shows connected your fine.. at this point you should be able to run sbf files

The defy doesn't even power up when I push the power button

djmajino said:
The defy doesn't even power up when I push the power button
Click to expand...
Click to collapse
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me

dilfatx said:
are you reading the steps??? clearly says that the screen might not light up or lights might not turn on..but thats ok..
before we do all this did you make sure your battery is fully charged?
please read my last steps carefully and try it out..i was in same boat and worked for me
Click to expand...
Click to collapse
I tried McGyver hack, phone was connected, I did flash 2.51.1 UK version non carries, but nothing did,
On screen was:
SW update
In progrees
at RSD was Phone is being rebooted and PASS, but nothing on phone screen

Defy is working againg, but I was at the service

so using the MacGyver hack method enabled your computer to see your phone again?
I have the same problem (flashed wrong rom, phone bricked with just a black screen, flashed the same wrong rom again hoping for a different result, still bricked, read up on what was going wrong, came back the next day and my computer (including RSD Lite) could no longer see my Moto Defy. Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.

1. Make sure your battery is charged.
2. Make sure you've all the latest drivers from Motorola's Website installed.
3. Make sure your RSD Lite version is atleast 4.9. I use v5 and had no problems till now.
4. Boot into bootloader mode.
5. Flash
If it doesn't work:
Try MacGyver hack.
In case you don't know what it is, search here in xda forums. You'll find it.

Update your drivers and do the same as above
Sent from my MB525 using xda premium

Same as above worked 4 me I needed to put on the latest gb rom the non downgrade one.
defy cm7

komakaze said:
Next step i'm either going to have to (1)borrow another Moto Defy battery that is guaranteed fully charged (i have no way to check the amount of charge in mine while my Defy is out of action) or (2)cut up a USB cable and do the MacGyver hack.
Click to expand...
Click to collapse
Option 3 is to buy a cheap standalone wall charger for the Defy battery off eBay, like this one, to keep your battery charged between attempts to flash the phone. Gotta be less risky than the McGyver hack.

Not sure if the standalone wall charger will work, seems to me that the phone doesn't actually recognise the battery, however I have no means to test this and it's just a guess.
If it does actually detect your battery level but just can't charge it then what you listed is fine.

hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: Please Google defy stock rom!!! googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
---------- Post added at 05:37 AM ---------- Previous post was at 05:30 AM ----------
Sorry, Google defy stock recovery!!!

[Q] Milestone 2 bricked. Doesn't power up

Hello I have a problem with my milestone 2.
I was using cm7 and today I flashed the official gb sbf via RSD.
Then the phone bootlooped and I tried to enter motorola recovery pressing the "x" and then the @, but when the android exclamation appears and I pressed the @ nothing happened. As I have not gotten into recovery mode I decided to flash froyo sbf.
RSD said "finished" and didn't do anything. I tried to boot up the phone via power button and nothing happens. Tried charging the phone with no results. So now I've got no idea of what to do.
Any ideas?
Sorry for my english
Thank you

Ok now ive managed the way of flashing the phone again. Weird though, With the screen in black. Now it works. For avoiding the bootloop, it is possible to wipe data/dalvik/cache via the pc?
Thanks

Are you sure you have some charge in battery yet? Did you have full battery before flashing SBF? If you are sure, this is not because battery is empty, then try to get into bootloader by holding Power+Volume Down+Camera button and it should be recognised in Windows and then you can try RSD Lite. Or you can try another computer/cable/Linux
EDIT: I don't think so, since you can only use RSDLite (or sbf_flash in Linux/Mac) when in bootloader mode. So best way for you would be flashing SBF again.

yes I had battery and I bought a wall charger just in case. ( I had the battery problem months ago)
I'm having strange issue. The screen is black and RSD recongnises the phone. I can flash sbf but the screen is block during the "creating image file" status. When rsd says "flashing code group etc..." the phone screen lits and shows "SW update in progress" as normal.
But when RSD reaches 100% it says "finished and PASS".
I've done this before and at this part the phone reboots and rsd messoges "the phone is being rebooted"...
Now im trying too flash gingerbread official again...
let's see

Ok now with the official GB sbf the phone reboots lets see if it bootloops.
Asking again!:
Is possible to wipe dalvik/data/cache without entering recovery? via PC?
OK if someone has this problem remember that the @ button doesn't work anymore. Try vol up + vol down instead!!!

My MS2 is too. Don't boot into HS.

eduwp90 said:
yes I had battery and I bought a wall charger just in case. ( I had the battery problem months ago)
I'm having strange issue. The screen is black and RSD recongnises the phone. I can flash sbf but the screen is block during the "creating image file" status. When rsd says "flashing code group etc..." the phone screen lits and shows "SW update in progress" as normal.
But when RSD reaches 100% it says "finished and PASS".
I've done this before and at this part the phone reboots and rsd messoges "the phone is being rebooted"...
Now im trying too flash gingerbread official again...
let's see
Click to expand...
Click to collapse
i had same problem here`s solution.

Having the same issue, none solution worked for me so far...
have u guyz flashed that 70.13 bootloader before? i did it like 3 months and i think that's the issue.

How is it?

OK people this problem is semi-solved.
If you flashed the official GB you can't downgrade.
If you try it you will get a black screen and the only solution is to re-flash the official GB

eduwp90 said:
OK people this problem is semi-solved.
If you flashed the official GB you can't downgrade.
If you try it you will get a black screen and the only solution is to re-flash the official GB
Click to expand...
Click to collapse
Official GB... waitting ?

eduwp90 said:
OK people this problem is semi-solved.
If you flashed the official GB you can't downgrade.
If you try it you will get a black screen and the only solution is to re-flash the official GB
Click to expand...
Click to collapse
that`s, what i wrote answering Your post

This problem can fix.
1. Enter Stock recovery by: Put both POWER + X -> put together Vol + and Vol -.
2. Factory reset ( wipe data) and wipe cache partition
3. Done...

Guys, I am having kind the same problem with my device.
I try factory reset on the recovery mode, but then the phone shuts off before it end and does not comes back out (I have to wait couple minutes to get back).
I was trying to upgrade my phone from 2.2 to 2.3.5...
I try the bootloader and it shows me that the battery is low and nothing happens.
This happens, even when it is pluged to the wall charging.
I see also that, the light next to the mini ubs connector shuts off when the phone turns on.
I do not know what is going on and what else I can do to fix it..
Can you guys help me out?

My M2 doesn't bootup afer try downgrade from GB to Froyo, i try boot up the phone via power button and nothing happens.
I have try to charge the battery for all night, the led will be off, but the phone and battery are very hot; i suppose aren't the battery the problem..

nethak said:
My M2 doesn't bootup afer try downgrade from GB to Froyo, i try boot up the phone via power button and nothing happens.
I have try to charge the battery for all night, the led will be off, but the phone and battery are very hot; i suppose aren't the battery the problem..
Click to expand...
Click to collapse
You can't just go back to froyo from gb, at least not directly.
If you were on any 2.3.4 or Retail/TIM Brazil 2.3.6 (not VIVO) , you can try this method: http://forum.xda-developers.com/showthread.php?t=1497263
Good luck :good:

Lean946 said:
You can't just go back to froyo from gb, at least not directly.
If you were on any 2.3.4 or Retail/TIM Brazil 2.3.6 (not VIVO) , you can try this method: http://forum.xda-developers.com/showthread.php?t=1497263
Good luck :good:
Click to expand...
Click to collapse
i use the metod of endless7 when i brick the MS2, but my actually problem is that now i i push power button and nothing happens, doesn't start bootup, doesn't start recovery, doesn't start bootloader

nethak said:
i use the metod of endless7 when i brick the MS2, but my actually problem is that now i i push power button and nothing happens, doesn't start bootup, doesn't start recovery, doesn't start bootloader
Click to expand...
Click to collapse
Maybe you tried to downgrade a non-downgradeable 2.3.6 firmware... what firmware did you have before the brick?

Caesarivs said:
Maybe you tried to downgrade a non-downgradeable 2.3.6 firmware... what firmware did you have before the brick?
Click to expand...
Click to collapse
the last CM7 of endless7 and before GB europe stock

nethak said:
the last CM7 of endless7 and before GB europe stock
Click to expand...
Click to collapse
Maybe try to flash via RSD Lite the same stock firmware you had before CM7 (GB) and do a full wipe, then if the stock firmware is downgradeable (you have to check that it is BL=3 or lower, if it is BL=4 you're stuck in GB) try the method posted by Lean946: http://forum.xda-developers.com/showthread.php?t=1497263
In the post linked there's a tool to check the BL version
To flash the original stock you must get the sbf file from here: http://sbf.droid-developers.org/umts_milestone2/list.php
And the motorola drivers from http://developer.motorola.com/tools/usb_drivers/
And RSD Lite 5.7 from http://www.mediafire.com/?racaejnadym1q2g
And follow this guide: http://forum.xda-developers.com/showthread.php?t=1032372
Hope it helps

Motorola Bravo HARD BRICKED

Well somehow i bricked my phone,I'm stuck on the Motorola logo,i try using sbf but it does not recognize my phone, oh yeah i had install cm7 diet rom witch really would not let me get into recovery cuz it kept saying that my phone was a htc bravo? So i try a droid bootstrap to see if that work and that's when my phone got bricked, can someone please help,and yes i tried going into recovery by pressing the volume and power button and it takes me into recovery and brings me to the Android and exclamation but that's it, even if i pressed the lower right corner nothing happens

ssfirme said:
Well somehow i bricked my phone,I'm stuck on the Motorola logo,i try using sbf but it does not recognize my phone, oh yeah i had install cm7 diet rom witch really would not let me get into recovery cuz it kept saying that my phone was a htc bravo? So i try a droid bootstrap to see if that work and that's when my phone got bricked, can someone please help,and yes i tried going into recovery by pressing the volume and power button and it takes me into recovery and brings me to the Android and exclamation but that's it, even if i pressed the lower right corner nothing happens
Click to expand...
Click to collapse
Press both volume buttons on the screen with the android and exclamation mark. That'll take you to stock recovery where you need to wipe data and factory reset.
If you have to flash the sbf again, try using sbf_flash on Linux. It'll flash in times where RSD won't recognize your phone.
Linux Live\sbf_flash tut
sbf_flash binary is in attachments
Only use Defy 2nd-init for recovery
(and once its installed, steal /system/bootmenu/* and /system/bin/bootmenu from Defy CM9 from June 5th on up -- touch bootmenu is pretty awesome; replacing the bootmenu isn’t for the feint of heart.)

the only problem is i dont have linux i have windows 7

Use rsdlite sri I don't have a link on me
Sent from my Galaxy Nexus using XDA

Had same type of problem on Friday. Followed this post http://forum.xda-developers.com/showthread.php?t=1559109 now I'm back up and running.

ssfirme said:
the only problem is i dont have linux i have windows 7
Click to expand...
Click to collapse
I dual boot between the two
If you have a blank cd and a usb drive\sdcard you can just use a Linux Live environment -- you never install Linux at all -- and you can use sbf_flash from there.
RSD Lite version that works and tutorial
And since it hasn't been mentioned yet, holding volume up + power on boot access the boot recovery to flash sbf's. Just make sure you have at least 50% battery before flashing or you might get an actual brick.
What your dealing with is nothing more than a recovery screw up. I had the same problem last night installing touch recovery -- it wiped /bootmenu/ instead of installing to it. Solution is to flash sbf, reboot, wipe data/factory reset from stock recovery, reboot, eebluroffee at first screen, root, enable non market apps, Defy 2nd init flash something that's better than stock.

ok i install the motorola usb drivers and start up rsd lite but it does not regocogize my phone

yes i have it in bootloader mode

Did you install everything before plugging phone in?

Try uninstalling everything motorola related and reinstalling just the drivers....On a previous Win7 install nothing was recognized, but on a reinstall of the entire system it worked fine and still does. I still recommend the Linux way over RSD because it will flash your phone regardless, provided you can access the loader.
I still haven't gotten native tethering to work with Windows, but then again, I quit trying sometime around December or January.

ssfirme said:
ok i install the motorola usb drivers and start up rsd lite but it does not regocogize my phone
Click to expand...
Click to collapse
This is for all those people who are having trouble flashing with RSDlite in Vista & WIndows 7.
If I am right, RSD lite does not seem to recognize the sbf file after you select it and instead the "start" button remains grayed out.
If that's the case, here the solution:
I had a similar problem and sucessfully used the command line parameters for RSDlite to force a flash. I managed to get a signed/unsigned firmware installed.
You need to copy the firmware you want to flash into the RSDlite directory in your program files folder.
Make sure you are in bootloader mode first.
Then, open command prompt and "cd" to the RSDlite directory
eg:
> cd C:\
> cd Program Files
> cd motorola
> cd RSDlite
>
now for the flashing type:
> SDL.exe -f xxxx.sbf -t 2
where xxxx.sbf is the firmware you are flashing to the phone.
flashing will begin shortly afterwards.
It worked for me, but in the end, show FAIL STATUS.

skeevy420 said:
I dual boot between the two
If you have a blank cd and a usb drive\sdcard you can just use a Linux Live environment -- you never install Linux at all -- and you can use sbf_flash from there.
RSD Lite version that works and tutorial
And since it hasn't been mentioned yet, holding volume up + power on boot access the boot recovery to flash sbf's. Just make sure you have at least 50% battery before flashing or you might get an actual brick.
What your dealing with is nothing more than a recovery screw up. I had the same problem last night installing touch recovery -- it wiped /bootmenu/ instead of installing to it. Solution is to flash sbf, reboot, wipe data/factory reset from stock recovery, reboot, eebluroffee at first screen, root, enable non market apps, Defy 2nd init flash something that's better than stock.
Click to expand...
Click to collapse
Thank you sooooooooooooooooo much!
After several hours of messing with my brothers Bravo, I finally got it working by following your instructions.
Really: I'm speechlees man.

hard bricked my phone
hello. i'm looking for any help to this issue: i believe i hard bricked my bravo somehow. it was running one of the first MIUI rom for two or more years. but became slow and laggy thru last months. and the other day it just freezed while i was browsing the call log. no reaction to the pover button at all, had to take out the battery. now it gives no reaction to any combination of button presses ( power; vol up + power ; vol down + power), the only signal what see is white LED light when į connect the phone to the PC. When phone is connected to the pc freshly, and when i press Vol down + Power, Windows 7 releases "clink" sound and device manager tries to show that "Motorola USB Device" is connected, but quickly disapears with another Windows sound. RDS lite 5,0 doesnt recognize phone too.
Is there any chance to bring this phone alive? any advise will be appreciated.
p.s. english isn't my native. sorry for the mistakes

dzdonce said:
hello. i'm looking for any help to this issue: i believe i hard bricked my bravo somehow. it was running one of the first MIUI rom for two or more years. but became slow and laggy thru last months. and the other day it just freezed while i was browsing the call log. no reaction to the pover button at all, had to take out the battery. now it gives no reaction to any combination of button presses ( power; vol up + power ; vol down + power), the only signal what see is white LED light when į connect the phone to the PC. When phone is connected to the pc freshly, and when i press Vol down + Power, Windows 7 releases "clink" sound and device manager tries to show that "Motorola USB Device" is connected, but quickly disapears with another Windows sound. RDS lite 5,0 doesnt recognize phone too.
Is there any chance to bring this phone alive? any advise will be appreciated.
p.s. english isn't my native. sorry for the mistakes
Click to expand...
Click to collapse
Not sure if this will help since I did not watch the video myself, but a quick Google search gave me a video describing how to take a Motorola USB cable and modify it to unbrick a phone. I did not watch the video yet so I don't know how relevant it is to your problem. But just by looking at the video preview it looks like the difficulty level may be pretty high... Here is the link:
http://m.youtube.com/watch?v=XwwI_6doBWk
Sent from my LG-D415 using XDA Free mobile app

[Q] Defy bricked. Wont turn on, only white led on pc

I had cm11 (or 10, not sure) installed for about a month now (back in december) .... Went on a trip, and when coming back my phone battery ran out at the airport somehow, but i had fully charged it and i was not out all day enough for it to run out fully... I take my phone home, not really giving it much importance, and i noticed it was stuck on the bootlogo.. so i went into recovery and tried to re-flash the rom and fix it, but when i was installing the ROM again, the phone shut off randomly (i heard that happened with a certain recovery menu software sometimes, i cant remember the name)... then the phone wouldn't charge and/or turn on, and when I connect it to the pc, nothing happens other than the white led coming on.. RSD won't recognize it...
So i found out i had to charge the battery manually, and used a Universal Charger... Still, no recognition by RSD Lite...
Finally, i found a way:
1. Open RSDLite
2. Connect phone (no battery on it)
3. While holding Power + Vol Up, put the battery in
4. RSD will recognize your phone!
Problem is, it recognizes my MB525 as "S Flash OMAP0360"
And when i try to flash a .sbf i used previously to recover my phone (had bricked it before by trying to change ROMs in a sloppy manner), it seems to flash smoothly, but when it's going to reboot the phone, the progress goes up to 100% and then asks me to reboot it manually.. I read somewhere that to fix that i should take the battery out, disconnect the phone, put it back in, and make RSD recognize it like i mentioned before...... and after RSDLite says flashing is PASSED, the phone still won't turn on... I have tried at least three times and gotten the same result... Help?
The SBF i am using (because it helped me save my phone before) is:
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B25TIGCOLA01E.0R_JORLAFROTIGCOL A_P009_A002_M010_HWp3_WIG146037_Service1FF.sbf
EDIT: Also, i read somewhere that when all you get is the white led (when connecting to PC) it means that your battery is not charged enough for flashing.. ?
I don't know what to do?? I read that defy's are really hard to brick... But mine got bricked out of nowhere.. wtf?

Niko. said:
I had cm11 (or 10, not sure) installed for about a month now (back in december) .... Went on a trip, and when coming back my phone battery ran out at the airport somehow, but i had fully charged it and i was not out all day enough for it to run out fully... I take my phone home, not really giving it much importance, and i noticed it was stuck on the bootlogo.. so i went into recovery and tried to re-flash the rom and fix it, but when i was installing the ROM again, the phone shut off randomly (i heard that happened with a certain recovery menu software sometimes, i cant remember the name)... then the phone wouldn't charge and/or turn on, and when I connect it to the pc, nothing happens other than the white led coming on.. RSD won't recognize it...
So i found out i had to charge the battery manually, and used a Universal Charger... Still, no recognition by RSD Lite...
Finally, i found a way:
1. Open RSDLite
2. Connect phone (no battery on it)
3. While holding Power + Vol Up, put the battery in
4. RSD will recognize your phone!
Problem is, it recognizes my MB525 as "S Flash OMAP0360"
And when i try to flash a .sbf i used previously to recover my phone (had bricked it before by trying to change ROMs in a sloppy manner), it seems to flash smoothly, but when it's going to reboot the phone, the progress goes up to 100% and then asks me to reboot it manually.. I read somewhere that to fix that i should take the battery out, disconnect the phone, put it back in, and make RSD recognize it like i mentioned before...... and after RSDLite says flashing is PASSED, the phone still won't turn on... I have tried at least three times and gotten the same result... Help?
The SBF i am using (because it helped me save my phone before) is:
JORLA_U3_3.4.2_107-9_SIGNED_USAJORDMR1B25TIGCOLA01E.0R_JORLAFROTIGCOL A_P009_A002_M010_HWp3_WIG146037_Service1FF.sbf
EDIT: Also, i read somewhere that when all you get is the white led (when connecting to PC) it means that your battery is not charged enough for flashing.. ?
I don't know what to do?? I read that defy's are really hard to brick... But mine got bricked out of nowhere.. wtf?
Click to expand...
Click to collapse
Hey there. Well, if it's still flashable it ain't bricked. I've got my other one to not be recognized (broken bootloader), which is beyond usual repair. So, did you you flash some random SBF before the rescue one you're trying out now? There's a problem with previously flashed GingerBread or Defy+ SBF images. So it would be good to know, what was the SBF running before trying "JORLA_U3_3.4.2_107-9". Also according to http://sbf.droid-developers.org/phone.php?device=27 that is 2.2.1 and there's also a "Android 2.2.2 Blur_Version.34.4.802.MB525.Latam.en.01". Tried that as well?
Anyhow, if the phone is seen by RSDlite it actually powers on and is recoverable. If the screen is just staying black, then you probably tried a downgrade from a Gingerbread SBF and didn't watch out for the BL-version.
If it's a BL-version problem then this might help. Also there is a guide to unbrick. And yes, keep an eye out for the battery level. Best would be an external charger, as the phone does not charge. McGyver way should still work though.
If it shows a LED and is seen over USb, it's not dead (yet)
Also look out for section "Common Problems/Questions" here.

htto said:
Hey there. Well, if it's still flashable it ain't bricked. I've got my other one to not be recognized (broken bootloader), which is beyond usual repair. So, did you you flash some random SBF before the rescue one you're trying out now? There's a problem with previously flashed GingerBread or Defy+ SBF images. So it would be good to know, what was the SBF running before trying "JORLA_U3_3.4.2_107-9". Also according to http://sbf.droid-developers.org/phone.php?device=27 that is 2.2.1 and there's also a "Android 2.2.2 Blur_Version.34.4.802.MB525.Latam.en.01". Tried that as well?
Anyhow, if the phone is seen by RSDlite it actually powers on and is recoverable. If the screen is just staying black, then you probably tried a downgrade from a Gingerbread SBF and didn't watch out for the BL-version.
If it's a BL-version problem then this might help. Also there is a guide to unbrick. And yes, keep an eye out for the battery level. Best would be an external charger, as the phone does not charge. McGyver way should still work though.
If it shows a LED and is seen over USb, it's not dead (yet)
Also look out for section "Common Problems/Questions" here.
Click to expand...
Click to collapse
No, i have not flashed other SBF's ever... only CM roms but i did it through the phone itself, in recovery mode.. I'll try the 2.2.2 one you told me about and see how that works out!
EDIT: No luck, the phone stays at a black screen.. it wont even reboot when RSD is done flashing.. i have to take the battery out and put it in bootloader again for RSD to say it PASSED the flashing

Niko. said:
No, i have not flashed other SBF's ever... only CM roms but i did it through the phone itself, in recovery mode.. I'll try the 2.2.2 one you told me about and see how that works out!
EDIT: No luck, the phone stays at a black screen.. it wont even reboot when RSD is done flashing.. i have to take the battery out and put it in bootloader again for RSD to say it PASSED the flashing
Click to expand...
Click to collapse
Too bad Anyway, did you try 8. from here, that is
"
If you get " Please manually power up this phone " in RSD Lite pull battery out > put your battery back > reboot into stock recovery by holding Power button and Vol- button > Choose Wipe data/cache > Choose Reboot system now
"? Also holding Power and Vol-Down while inserting battery is said to work.
I wonder if there is an SBF that also flashes cache and userdata partitions...

Nope, it just stays black-screened.... It only works if i do VOL-UP for bootloader mode, but that doesnt help

Umm, as a shot into the blue: Did you try to reinstall the Defy drivers from Motorola? It seems that missing those hinder RSD lite from detecting the Phone as MB52x and instead just show the Processor identification, i.e. "S Flash OMAP3630"

Try dfp 231. The processor identification is correct( rsdlite has been set up properly).
Sent from my MB526 using Tapatalk

thekguy said:
Try dfp 231. The processor identification is correct( rsdlite has been set up properly).
Click to expand...
Click to collapse
Yeah, it worked also for the defy in this thread.
And just for reference the original thread with the hinted SBF:in post #4
"
WIIII i have successfull unbriked my defy with this rom
defyplus_u3_4.5.1-134_dfp-231_cn_sign_ucadefyemarab1b50aa009.0r_pds03c_usajr dngibrird15_p015_a030_service1ff.sbf.gz
"
Basically had the same BL7-problem.

htto said:
Yeah, it worked also for the defy in this thread.
And just for reference the original thread with the hinted SBF:in post #4
"
WIIII i have successfull unbriked my defy with this rom
defyplus_u3_4.5.1-134_dfp-231_cn_sign_ucadefyemarab1b50aa009.0r_pds03c_usajr dngibrird15_p015_a030_service1ff.sbf.gz
"
Basically had the same BL7-problem.
Click to expand...
Click to collapse
wtf, the phone flashed correctly and everything but the screen won't turn on.... The computer recognizes it as MB526 now, and i can touch the home button and stuff and it will vibrate like it used to when it worked... i can also make the ringtones play using the moto portal page... Everything works (except for calls) other than the fact that i still have a black screen... the screen just wont turn on... Also it said it had very little internal memory compared to what it had before (had at least 2 gb i think.. now not even one)
I had sent the phone over to fix, and they told me it was unfixable... Is it possible that the guy (it wasnt an official company) who "tried to fix it" simply took parts out of it ? -_- (if he had taken parts out of it im guessing the phone wouldnt turn on at all..?)
What can i do to turn the screen on??
EDIT: i flashed DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
I couldnt find the one you posted there so i did the central europe one...

Niko. said:
wtf, the phone flashed correctly and everything but the screen won't turn on.... The computer recognizes it as MB526 now, and i can touch the home button and stuff and it will vibrate like it used to when it worked... i can also make the ringtones play using the moto portal page... Everything works (except for calls) other than the fact that i still have a black screen... the screen just wont turn on... Also it said it had very little internal memory compared to what it had before (had at least 2 gb i think.. now not even one)
I had sent the phone over to fix, and they told me it was unfixable... Is it possible that the guy (it wasnt an official company) who "tried to fix it" simply took parts out of it ? -_- (if he had taken parts out of it im guessing the phone wouldnt turn on at all..?)
What can i do to turn the screen on??
EDIT: i flashed DEFYPLUS_U3_4.5.1-134_DFP-231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf
I couldnt find the one you posted there so i did the central europe one...
Click to expand...
Click to collapse
Umm, according to this thread it is supposed to be this one.
The GR vs CN maybe doesn't make a difference, but maybe the P022_A022 vs. P015_A030?
Doesn't a working phone portal allow for somehow to get logs/adb etc?