Hey guys just wanted to share this with you. I am working with Team Win to get a touch recovery on the A500. So far is still inop, but progress is bring made. We are gonna give another go tomorrow so wish us luck. Will keep you all posted.
Updates
1-5-12: So we are finding the using the tablet interface makes the recovery too large for our recovery partition. Team Win is probably going to have to build the recovery without an interface and then I will create a flashable zip that will flash the recovery as well as place a ui.zip on the external sdcard under twrp/theme(we can then just replace that ui.zip for different themes that come out, got a cool ICS one in mind already). The battery precentage is working but we are still working on the touch screen. New test build coming today and will have active logging enabled so that we can see more of what is happening, if touch is being recongnized but TWRP 2.0 is just not reacting to it. It's coming along though.
1-6-12: SO we got TWRP 2.0 up and running for the most part. Touch screen works and most all functions work. Get backup failures and is not sized properly but we are really, really close. Did install a rom and booted just fine. Release will be real soon, possible monday. Still have to get the resolution figured out as well, but what we have so far is very usable.
2-17.. So work on this has slowed way down due to dev on teamwin side has other projects that he is working on that is more important to him(which there is no problem with that, would just like to get this project completely going). But TWRP 2.0 has gone completely opensource. So just wondering if we can tackle this and get it up and running. We are on #twrp on freenode irc usually everyday M-F around 11am-1pm Mountain Time. If you are able and willing to help, please come and give us some fresh ideas.
3-8. Everything is working and is ready for release very soon. Some final testing and will be release. Data/media fixed and flexrom fixed. PLEASE HOLD!!
3-13. New features being added. We will have the ability to toggle back and forth between internal and external for backup location. Doing some code clean up and making sure all features are working properly. Have used it to install many roms/flashes and have yet to have any issues. It's coming along nicely. Huge thanks to Dees_Troy on TeamWin for his work on this. You da man!
I run TWRP 2.0 on my Evo 3D. Would love to see it on my A500. So much better then all the button presses to navigate through the recovery menu.
I would love to see TWRP 2.0 on the A500. I have it on my Sensation and think it is some of the absolute best development to come out of the Android development community recently. Best of luck guys.
Muahahaha. Can't wait!!!
Sent from my HTC EVO 3D using Tapatalk
Updated OP with some status update.
I used a steam recovry on my captivate that was full touch and really liked it. I dont remember any sort of oddities to get it running. Maybe talk to one of them and see how they got theirs set up.
if i can make one request i sed it on my phone and it was awesome. One thing the when selecting ROMS the font is small and often hard to hit the right one
IIRC you need to have the "itsmagic" script run at boot. When I came to the A500 scene it was already figured out so I'm not 100% sure on what it was or what exactly it does but I would recommend looking in to it. I'm sure some more senior A500 developers could help with its purpose.
Sooooooo close!
Updated OP, she is almost ready!
That is looking sweet, I like that 2nd gui alot better than the first one. A lot cleaner. rstuckmaier brought up an important point, are you including the "Its Magic" script in the recovery. I thought that was needed to fix the checksum values.
I don't see where any of the new recoveries do anything with "itsmagic" during the install process. The new GPL complient does nothing with itsmagic. Nor do thors.
Here are some screens of the boot up screen and a ICS theme.
pimpmaneaton said:
Here are some screens of the boot up screen and a ICS theme.
Click to expand...
Click to collapse
Great job!
cruise350 said:
That is looking sweet, I like that 2nd gui alot better than the first one. A lot cleaner. rstuckmaier brought up an important point, are you including the "Its Magic" script in the recovery. I thought that was needed to fix the checksum values.
Click to expand...
Click to collapse
Yeah the first shot we were running the phone layout, Second is a tab layout but not correct res. We should get it all figured out monday.
pimpmaneaton said:
Yeah the first shot we were running the phone layout, Second is a tab layout but not correct res. We should get it all figured out monday.
Click to expand...
Click to collapse
I'm certain you'll post it up in the DEV sections as soon as it's ready for "prime time"!
Thanks again for your dedication and hard work!
kjy2010 said:
I'm certain you'll post it up in the DEV sections as soon as it's ready for "prime time"!
Thanks again for your dedication and hard work!
Click to expand...
Click to collapse
Yes I will, no need to just have small talk about it in the DEV thread untill she is ready to Rock&Roll. I am hoping that this will breather new life into this thread and Iconia A500 communtiy. I know I have not done a whole lot, but plan on doing more. 1st-TWRP 2.0, 2nd- New Galaxy Rom.
pimpmaneaton said:
Yes I will, no need to just have small talk about it in the DEV thread untill she is ready to Rock&Roll. I am hoping that this will breather new life into this thread and Iconia A500 communtiy. I know I have not done a whole lot, but plan on doing more. 1st-TWRP 2.0, 2nd- New Galaxy Rom.
Click to expand...
Click to collapse
We need a good new Galaxy ROM! Back when these tabs first came out, M-Deejay's Galaxy port was my favorite ROM. Of course that was back when I was flash crazed, and looking for a fit to my preferences. Can't wait for it!
pimpmaneaton said:
Yes I will, no need to just have small talk about it in the DEV thread untill she is ready to Rock&Roll. I am hoping that this will breather new life into this thread and Iconia A500 communtiy. I know I have not done a whole lot, but plan on doing more. 1st-TWRP 2.0, 2nd- New Galaxy Rom.
Click to expand...
Click to collapse
Thanks for this. Read up on TWRP and it sounds and looks great. Definitely looking forward to your Galaxy offering.
Great job spear-heading these efforts. They are appreciated.
pimpmaneaton said:
I don't see where any of the new recoveries do anything with "itsmagic" during the install process. The new GPL complient does nothing with itsmagic. Nor do thors.
Click to expand...
Click to collapse
"itsmagic" is needed to recalculate the ROM checksum for the encrypted bootloader, which is verified every time you boot. Either you need to execute it (and Thors DOES do that, just read the install instructions for his 1.6 V2 recovery), or you need to incorporate its code into your recovery.
If you flash a new rom without recalculating the checksum afterwards, the checksum verification will fail and you won't be able to boot, essentially bricking the device.
FloatingFatMan said:
"itsmagic" is needed to recalculate the ROM checksum for the encrypted bootloader, which is verified every time you boot. Either you need to execute it (and Thors DOES do that, just read the install instructions for his 1.6 V2 recovery), or you need to incorporate its code into your recovery.
If you flash a new rom without recalculating the checksum afterwards, the checksum verification will fail and you won't be able to boot, essentially bricking the device.
Click to expand...
Click to collapse
If you manually install thors kernels then yes you do use itsmagic. But his flash script does not use it nor is it included in the flash zip either. I ensure you it will be tested thoroughly before its release. I have flashed virtuous galaxy with it and it booted fine.
Sent from my Sensation Rockin MIUI 1.12.16!
Related
This is not a support or bug reporting thread!
This is not a support or bug reporting thread!
This is not a support or bug reporting thread!
This is not a support or bug reporting thread!
My Goal:
To provide a single flashable zip with the most up-to-date Gingerbread porting efforts for the captivate!
The current Kernel/initramfs is newer then what is posted by supercurio in the i9k section.
Fixes, Tweaks & Extras:
External sd device support (kernel level)
Fully Deodexed
Fixed boot garbage output
Addded Updated Market
Fixed Market crash
Dual Boot Support
Added sqlite3
Added 3 Button Fix
Added Ad Blocking
Fixed the build.prop fingerprint so you can see all apps in the market
Fixed root not working
Fixed Busybox symlinks
Known Issues:
Camera does not work
GPS does not work (network can still find you, good for general location)
Wifi (if left on while phone enters sleep will cause a kernel panic)
General Stability (random things at random times can cause FC's, soft reboots, etc...)
Prerequisites:
Anything that converts /data to ext4 (Voodoo, ULF, etc...)
Usb drivers:
Download
Tech Demo Download Build-4:
Download
Credits:
supercurio
coolya
codeworkx
renaud
cpasjuste
Unhelpful
jt1134
pawitp
trasig
ajerman
xcaliburinhand
fenfir
DemonWav
Sombionix
This is not a support or bug reporting thread!
This is not a support or bug reporting thread!
This is not a support or bug reporting thread!
This is not a support or bug reporting thread!
cant wait to try this!!! been waiting for an easier way!!!
Edit:
pretty unstable still, tried a couple diff modems same problem hard to get connection, and pressing power button to turn screen off just reboots my phone everytime.
exciting.
(Second !)
Hey designgears
It's happy holidays, what about all the Jehovah's witnesses .
DJNgoma said:
Hey designgears
It's happy holidays, what about all the Jehovah's witnesses .
Click to expand...
Click to collapse
They are more then welcome to chime in their version as well!
Is this going to be any different than flashing the normal way?
Sent from my Captivate.
Merry CHRISTmas!!!
Hopefully this will be ready for download when I get home from work.
Sully
PS. DG, if you want some extra mirror space check the download speed for Axura in my sig. Shoot me a PM if you would like me to set you up a FTP account with a couple gig of storage.
MikeyMike01 said:
Is this going to be any different than flashing the normal way?
Sent from my Captivate.
Click to expand...
Click to collapse
Yes, it will have a prerequisite of anything with voodoo enabled. From there you just flash a zip and boot.
Its not a perfect 1zip install from anything, yet...
Christmas morning and we are all still on here!! lol happy holidays my extended family
smokestack76 said:
Christmas morning and we are all still on here!! lol happy holidays my extended family
Click to expand...
Click to collapse
My wife is going to kill me
Daughter just turned one, first real Christmas with the family, she is going to be so spoiled... pretty sure the present stack is bigger then the damn tree XD
designgears said:
My wife is going to kill me
Daughter just turned one, first real Christmas with the family, she is going to be so spoiled... pretty sure the present stack is bigger then the damn tree XD
Click to expand...
Click to collapse
Awsome man. My youngest is 13 now. They only want money now lol. Im the only one awake so im safe for now
Seems like i use now alot lol. Anyhow thanks for this present DG.
smokestack76 said:
Awsome man. My youngest is 13 now. They only want money now lol. Im the only one awake so im safe for now
Seems like i use now alot lol. Anyhow thanks for this present DG.
Click to expand...
Click to collapse
haha, *hides all of his money*
It will be up soon, then I will be camping the fire place with my shotgun!
edit--
woops, I mean going to bed!
edit2--
Its live!
odin flashing to stock then perception 9.5 right now as i download it!!!!
EkostonS said:
odin flashing to stock then perception 9.5 right now as i download it!!!!
Click to expand...
Click to collapse
found a problem, messed up data permission, just chmod /data to 771 and it will be all good
uploading fixed version now
designgears said:
found a problem, messed up data permission, just chmod /data to 771 and it will be all good
uploading fixed version now
Click to expand...
Click to collapse
will do, edited post #2 after booting i got 3g lock almost right away! nice to see telus APN in the list
EXTREMELY EXCITED.
Have been waiting for this!
So all I need to do please correct me if Im wrong is flash any other ROM such as Perecption or Cognition ect. Or just install the latest Voodoo Lag Fix. Then just flash this also on top of that through Clockwork?
Thanks and PLEASE correct me if im wrong here.
Dlev7 said:
EXTREMELY EXCITED.
Have been waiting for this!
So all I need to do please correct me if Im wrong is flash any other ROM such as Perecption or Cognition ect. Or just install the latest Voodoo Lag Fix. Then just flash this also on top of that through Clockwork?
Thanks and PLEASE correct me if im wrong here.
Click to expand...
Click to collapse
Personally if i were you i would wait for a more stable release, theres has been vast improvements in the kernel up till now but its still not ready for day to day use for everyone, plus if your unsure how to install it then you probably shouldn't ! But if you must , the method i used was flashed back to stock, gsm reset (code=*2767*3855#) which wipes all your memory, then flash darkys rom v7 and enable voodoo after phone boots and reboot it, then flash the gb kernel through clockwork recovery.... also i had to reboot the phone after installing the kernel to get 3g working...good luck
designgears said:
My wife is going to kill me
Daughter just turned one, first real Christmas with the family, she is going to be so spoiled... pretty sure the present stack is bigger then the damn tree XD
Click to expand...
Click to collapse
Consumers of ROMS sometimes forget that devs have family too.
Merry Christmas and Best Wishes to you and your family. Wish the same to all the devs.
Cheers!!
Thanks DG! Happy Holidays to everyone. Cant wait for more stable version too.
woot woot. finally a method i could do!! this does leave me some questions though.
is it possible to just flash to stock 2.2 (instead of a custom rom), install voodoo5, and than install the zip through rom manager?
http://project-voodoo.org/download
the voodoo stable 5.0, is that for the captivate? just making sure, dont want to download something thats for the i9000.
and lastly! if anything goes wrong, flashing one click odin will solve everything correct? all the changes (aka the eff ups) i made should return to stock settings?
sooo excited!!
edit. to eleborate on my voodoo worries.
will reflashing with odin to stock, change my kernal back to the stock one or will it keep voodoo? just wondering because i was wondering if its required that i disable (or uninstall) voodoo before i use odin to restore or could i just use odin after testing the rom out without any disabling/enabling.
edit 2:
shoot forgot to ask, what are the usb files for? im gut tells me their the files needed for the comp to recognize the captivate after flashing. and second, does this require a root? and this is the LOL question, could i just rename the 2.3 file a "update.zip" and install it like that or do i have to do the whole clockwork thing. Six question. geez im dumb.
Merry Xmas!
What else do we need to start getting some custom roms like CM7 and others like XxVirusxX. What is need to take an AOSP and build it for our Elocity? I recently got and Evo 4g rooted is same day, now running CM7 rom, tiamat kernel, viper undervolt Is it possible to get these to work on this elocity?
its possible to port components and features of other roms, or to compile other roms for the a7. i compiled a clockworkmod recovery that i have posted on my twitter and elsewhere than you can use to conveniently backup/switch/restore roms and data with, which will aid in additional roms being made accessible, as loading them (and recovering from them) will be more convenient.
also gotta good /device setup for the naz10 going for use in rom compiling. mebbe i'll post it up for others when i have it near complete.
How did you get the clockwork mod to flash? Also I'm assuming you finished the key mapping that hadn't been done?
bestialbub said:
its possible to port components and features of other roms, or to compile other roms for the a7. i compiled a clockworkmod recovery that i have posted on my twitter and elsewhere than you can use to conveniently backup/switch/restore roms and data with, which will aid in additional roms being made accessible, as loading them (and recovering from them) will be more convenient.
also gotta good /device setup for the naz10 going for use in rom compiling. mebbe i'll post it up for others when i have it near complete.
Click to expand...
Click to collapse
Is that why it has been so quiet in here haha
Sent from my Mynized EVo 4G
smal you can't say it wouldn't be awesome to have half the stuff you have for evo for the elocity
rombold said:
smal you can't say it wouldn't be awesome to have half the stuff you have for evo for the elocity
Click to expand...
Click to collapse
Oo of course, with out a doubt, Im just sitting back waiting for one of these great devs. Hopefully they got something good from the kernel Source
Sent from my Mynized EVo 4G
i might throw my sifted kernel source up for dev types to browse thru. just the added and modified source from elocity, not the whole package, so one can see what elocity did. pretty sure i spotted changed accelerometer settings in the kernel source that could aid in correcting that issue on a kernel level possibly.
i'm still moving slow without adb access. either have some service or kernel reconfiguration to do for that one. too many fun things to do, not enough personal time to get em all done swiftly.
Sent from my X10i using Tapatalk
Time will only tell and I got plenty of it
ayup, got the key mapping working with the latest clockworkmod recovery.
http://twitter.com/#!/bestialbub
it was confusing because it seems the newest version has a secondary back button. had to scratch my head a couple seconds until i figured to map it to the volume key and forget the key combinations for toggling display on and off.. tho power+search might toggle it (not really a useful feature of any concern).
oh, if you look at the devices existing keylayout, the volume or 'media_key' has the value of 213.
i left out instructions for flashing with apx on purpose. if you don't know how, you probably shouldn't, because i don't have a fix today for you if you break your device some how. i'll see about posting some complete apx backup scripts, along w/ a nvflash pack that doesn't have the added rom bloat + stock and my cwm recovery image. but that might be like in a week. i got that adb to work out, file permissions to finishing documenting for fun, and repacking the factory rom for cwm for fun.
nothing to exciting towards new features regular users will enjoy today, but something romheads/chefs/modders/themers will like to make software work and testing easier.
I Gotta get another male/male USB Wire, and I'll Be Watching out for Updated on This and Following you on Twitter no Also, Im Willing to try just as long as the directions are clear. Right Now im waiting on some HTC Sense 3.0 for the EVO. So im on XDA all Day haha
ROMBOLD: Check Your PM
bestialbub said:
i'll see about posting some complete apx backup scripts, along w/ a nvflash pack that doesn't have the added rom bloat + stock and my cwm recovery image. but that might be like in a week.
Click to expand...
Click to collapse
Awesome... <3
Either one would be awesome Amon ra or CWM recovery Wonder how much the tiamat kernels require to work for us?
cwm recovery is done and available for use. questions; leave at the link you download 'em from.
http://twitter.com/#!/bestialbub
i also have the factory rom repacked and install script made for use w/ cwm (and maybe factory) recovery. this should step up the ability for folks to mod and theme the existing roms. will post tomorrow, then mebbe post an nvflash/apx pack for backup/restore/recovery flashing before i get started on themeing to follow.
First of all i want to give all my Thanks To mike1986
For Letting me use Android Revolution HD as Base for this port: http://forum.xda-developers.com/show....php?t=1245892
This is an attempt to get the ICS-SDK Port for our beloved EEE-Pad's
ive been working on this for a half day and i came so far that it do boot up to black screen, as feonix friend did,
now i need to edit kernel to load the screen properly (yes this probably caused by the kernel)
still no sucess
Before commenting, I appreciate all your help, i seriously do, just please ask before what iv'e done instead of say what i have to do
To do
RESERVED!
ICEDROID/FROOZENDROID
V0.1
#edited boot image, makes it load correct framework files
Gets passed the asus logo!
Now got it to boot to black screen!
YES Feonix. I came here to!
Reserved also!
Upcoming
Edit bootfiles, currently screen is not started correctly!
Will this flash over a honeycomb rom?
When i had a galaxy s we had to repartition going from 2.2-2.3. As ICS is such a change from H, i just wanted to check.
Ps. Good work so far. Thanks.
Sent from my Transformer TF101 using xda premium
Reopening - let's make sure we all stay on topic and contribute to real development
[WIP] ICS SDK-Port
Ok so iv'e been following the "developer's" foox22
THANKS TO ANDROID REVOLUTION HD (Mike1986) for letting me use their port as a base of this!
(my 1.st zip was this way but then i got no boot.img that was optimized for this)
Forgive me for this post/topic, but this is the zip that should make the ICS to boot,
if you notice its a black and nothing else then its should be due to no "edited build.prop of our resolution!
that's why someone here before never got it to "boot"
http://www.multiupload.com/IU8R71F500
if this doesn't boot up, try get a logcat
And yes you all other developers can try get me a logcat // REGARDS
Im gonna delete your other thread
Do we have a list of what may not work currently?
acdcking12345 said:
Do we have a list of what may not work currently?
Click to expand...
Click to collapse
i need to know what if its loading properly, if anyone just can try V007, as that's the one that is correct, boot.img loads all correct framework file's if it doesn't boots up then its a, screen resolution problem or a lib problem,
about to flash in a min when back up finishes. will report
just hangs on black screen after eeepad splash
tomqman said:
about to flash in a min when back up finishes. will report
just hangs on black screen after eeepad splash
Click to expand...
Click to collapse
black screen, you did wipe everything ??
Moving this to General - there really isn't any real development going on other than some copies, pastes, and asking testers to bork their device. The OP can't test this on his own device but is asking others to do it for him. This is not development. When something of substance happens - then create a new thread that is actual development in the development section.
ok so to repack the boot.img
blobpack <headerfile=kernelblob.HEADER> <outfile=kernelblob> <partitionname=? kernelblob.ebt or kernelblob.LNX > <partitionfile=kernelblob.ebt or kernelblob.LNX >
and is this even nessesary ?_? kernelblob.LNX-config
what did this come from, after i repacked the kernelblob.LNX O___o
http://android.modaco.com/topic/348194-04-nov-icl23d-galaxy-nexus-boot-recovery-system-dump/
Did you see this?
Ranatsu said:
http://android.modaco.com/topic/348194-04-nov-icl23d-galaxy-nexus-boot-recovery-system-dump/
Did you see this?
Click to expand...
Click to collapse
leaked o__O test build omfg thats so cool, even if its avaible for sdk!
anyhow im sure we cant use it :/
SWEATTAIMI said:
leaked o__O test build omfg thats so cool, even if its avaible for sdk!
anyhow im sure we cant use it :/
Click to expand...
Click to collapse
You are right, it's no use for us... the Galaxy Nexus has NEON support, all binaries are compiled with that, and our TF (and every Tegra2 tablet) misses NEON...
fonix232 said:
You are right, it's no use for us... the Galaxy Nexus has NEON support, all binaries are compiled with that, and our TF (and every Tegra2 tablet) misses NEON...
Click to expand...
Click to collapse
Got it anyway
Ok so I know you guys here in the G2 forums already have some pretty nice recoveries but I thought I would offer mine as well
I don't have a G2 device so there's really no way for me to test out anything so I need some testers before I post working versions of the recoveries on rom manager. If your interested in testing post here or pm me and we'll go from there. I will be checking back on this thread and pm's.
Recovery features:
- These recoveries are based on Clockworkmod recovery meaning it will work with rom manager if you like to use rom manager to download various things and receive OTA notifications.
- If these recoveries are good I will be posting roms on rom manager for vision.
- These recoveries support EXT4 partitioning, meaning if you format or wipe any partitions they will be EXT4 and not EXT3 like the normal Clockworkmod recoveries.
- The UI of these recoveries are heavily modified and themed. Currently I have three versions, Green, Blue, and Red. I will be taking request on more themes.
Once this is confirmed working or not I will build and allow testing of more themed versions
Sreenshots
Main Menu: http://db.tt/b6jCh08B
Nandroid Backup: http://db.tt/BLZIqw8D
Install .zip: http://db.tt/38q2c56n
Alright I fixed the screenshots not sure why they not working before :/
____________________
Hitting the thanks button is soo much easier then typing thanks!
I'll test them. My g2 is anxious for new stuff.
Sent from my SGH-T989 using xda premium
Karakoram2 said:
I'll test them. My g2 is anxious for new stuff.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thanks sent you a pm
ive been testing recoveries for the Kindle Fire and thought id offer my help with the Vision. hit me if you need help. I vaguely recall testing your kernels with the Dream back in the fierat devvin days.
Sent from my T-Mobile G2 using xda premium
androidcues said:
ive been testing recoveries for the Kindle Fire and thought id offer my help with the Vision. hit me if you need help. I vaguely recall testing your kernels with the Dream back in the fierat devvin days.
Sent from my T-Mobile G2 using xda premium
Click to expand...
Click to collapse
oh yeah accually I wasn't compiling my own kernels back then like I am now I was just using pershoot's kernel lol. So far everything seems to be working but it's only been tested by one person so far. I'll send you a pm.
Alright I'm building the last blue version now then I should be ready to release these. Thanks to both testers I'll make sure and give you guys credit for taking your time to test these.
Thought I posted this yesterday but cant find it - so reposting
I flashed green hat recovery on Sat night and exhausted everything in the recovery menu except for sdcard partitioning -- could not find a bug anywhere. Everything worked at par for the course.
I especially liked how when the phone is off - and charging -- green hat recovery turns on -- so when Im done charging I can start off in recovery... (this was a "bug" with the older Clockwork Recoveries (beginning of v4-5) but I never saw it as a bug -- but as a feature. I hope you dont fix this!)
used all tools in reboot, confirmed this works directly from ROM Manager, did nandroid backup and restore to older build made last year, did advanced restore, bla bla - everything. No issues.
Well, let me know if you need more testing.
Awsome thanks IDK why the versions on my device still use charging while off like the newer recoveries do. Oh well I think I noticed koush mention a bug about this for G2 and how HTC charging while off is already a method that is not not compatible with the newer recoveries. Like you said the phone will still charge in recovery and reboot options are there but just kinda sucks if the led light doesn't show to tell you how charged it is.
Doesnt matter -- dont fixit please! Im trying to figure out how to make this happen on my Kindle Fire as well --- everyone calls it a bug... but its not a bug!
WOW I cant wait for this to be out! Great job! I have been following your work for a while now and am all excited! I like the idea of being able to wipe cache/data/sd ext.
androidcues said:
Doesnt matter -- dont fixit please! Im trying to figure out how to make this happen on my Kindle Fire as well --- everyone calls it a bug... but its not a bug!
Click to expand...
Click to collapse
Aw ok, well I guess I'll go ahead and release with the info that htc charging does not work anymore but this will still work great with rom manager. Thanks for the feedback I'll work on uploading later on today on rom manager.
Messaged Scott from CleanROM Says he is looking for a new challenge. He does great work my favorite rom for GS3 hands down, whos in?
Im tired of no recovery or ROMs for this beast of a tablet. Who wants to help me jump start this?
Maybe first start with cwm, so we have the basics out of the way?
Sent from my GT-p6800 using xda app-developers app
Ok so why doesnt someone use the CWM recovery builder and make one?
CWM recovery builder http://builder.clockworkmod.com/
I would be interested in a CleanROM as well. I will donate - as long as it is supported.
ckelly33 said:
I would be interested in a CleanROM as well. I will donate - as long as it is supported.
Click to expand...
Click to collapse
I'd throw in twenty bucks for any rom that was actually good, and has support....No go if someone just compiles Inge blind with no device in hand
tonytownsend said:
Ok so why doesnt someone use the CWM recovery builder and make one?
CWM recovery builder http://builder.clockworkmod.com/
Click to expand...
Click to collapse
In another thread you can see me and three other guys doing our best to get that working. One guy got close, got a building environment up and running. At that point, TWRP arrived with an almost ready recovery. I think the last bugs are being sorted at the moment. In addition, I am still waiting for confirmation that it works with the p605-model.
So, to get this development train rolling, make a comment in the TWRP-thread so we can get that recovery completed. When that is done, I guess there is no holding back when it comes to testing ROMs, kernels etc.