Going to partition. - Galaxy 3 General

Okay, after a long wait I decide to partition my Class 2, 8 GB SD Card.
But I wanna know, that right after I partition, if I directly flash a ROM which supports App2SD will my installed apps directly go to the SD Card?
Also can someone provide me link to the most used SD Card partitioning tool used around here?

i am also in the same boat
i too have a 8 gb class 2 SD card....have not yet partioned
but the low internal memory is killing me!

[email protected] said:
Okay, after a long wait I decide to partition my Class 2, 8 GB SD Card.
But I wanna know, that right after I partition, if I directly flash a ROM which supports App2SD will my installed apps directly go to the SD Card?
Also can someone provide me link to the most used SD Card partitioning tool used around here?
Click to expand...
Click to collapse
Yes they go directly to the a2sd partition. I use cwm to partition. Some use minitool partition wizard(or something like that) to partition thru their windows pc
Sent from my i9003 powered by Poseidon's Rom + UC kernel

Related

[Q] How to Partition SD Card

Searched before, never did found a good tut for partitioning a SD Card with Success.
Like to partition a SD card to ext/swap/fat32 properly.
Also always wonder, can I install apps on to SD card fat32 partition or ext? rather than the Cell build in memory?(myTouch 3G 1.2)
Can some one point me to a good tutorial to do this?
Or a video tutorial?
Cheer!
ND
Use the option in your recovery image. I think AmonRA's should work just fine.
The ROM your using will decide whether you can install apps to FAT or to EXT partitions. Honestly I would use the EXT partition out of the two because if loaded to FAT you'll lose your Alps when you unmount your SD card. Honestly you've got plenty of internel storage so you shouldn't need it.
Sent from my HTC Magic using XDA App

[Q] Upgrading from 4gb sd to 8th sd?

So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Bambam01 said:
So all i want to do is take everything off my 4gb sd card and use an 8gb sd card so that I have more storage space. Everything works great as is, and I wanted to keep everything as is. Just need more storage space. I've looked through the forums and haven't found anything that addresses this process. I am running CyanogenMod 7.0.3 w/a 4gb sandisk micro sd card. How do I copy so that it boots just like my 4gb card???? Thanks ahead of time for any help.
Click to expand...
Click to collapse
I recommend just writing an image file with winimage. Then writing it to a 8gb card, then using Easeus Partition manager to expand the last partition to full 8 gb.'
Do you boot from the SD card or eMMC?
If it's the latter, just copy the contents of the old card to the new one.
If it's the former, I recommend a fresh install; use a backup program (MyBackup, Titanium Backup) to back up your Apps and Data and then restore when you're done with the fresh install.
I'd like to do this as well.. in response to previous reply.. there are 4 partitions (boot, 2 other and last one with your data) do I have to create 4 different images with winimage or just for the first boot partition or does the winimage creates the image of the whole msd card?
The winimage will create a 4 gb image of your card on the 8 gb cards including existing partitions. What you'll need to do is get the largest partition to expand to the whole card. Assuming that the 4gb install on SD is the same as an 8 gb install if you did it fresh.
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Phatdawg said:
If the partitions are set different for 8 gb on a fresh install, you're better off just doing a fresh install and use titanium backup as the other guy said.
Click to expand...
Click to collapse
That's a good point, the Size-agnostic SD installer uses different partition sizes for everything except the boot partition depending on the size of the card.
I tried winimage first to see if it even worked. Which it didn't. I didn't try to expand the existing partition. It just booted as a normal nook. You would think this would be a easy process but.... Lol, always new challenges. Guess that's why I enjoy doing this.
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Bambam01 said:
Well I tried yet again w image, expanded the partition. Still. Didn't work. I must be missing something. How hard can it be to make a copy of a bootable card? Must b brain dead today! Any other thoughts? Thanks!
Click to expand...
Click to collapse
I have done this several times, and I recommend downloading easus todo backup free. Then place both sdcards in a card reader, run todo backup and just copy the 4g to the 8g and expand the fourth partition right there in todo.
This applies especially if you want to copy to same size sd's, as you will not run into the usual image sizing issues.
Hope this helps
I don't know what you're doing wrong. before expanding the partition, make sure the sd boots, if it doesn't, then there's a problem with image being read or written as opposed to the partition.
I also had a problem with a new SD card not booting that I fixed by using the nook (that is the core nook OS) to reformat the card, then put the image onto the SDcard (shouldn't have changed anything as far as I know, but it did anyway).
Ok I tried this and it worked flawlessly. Used win32diskimager to "read" my 4gb sd with cm7 image. and then used "write" to 8gb sd card. It cloned 4 gb original image with 4 partitions and one unused partition of 4 gb. After that used easeus partition manager(latest version) to format unused pattition to fat32 and then merged with last partition of 2gb (move/resize) ..so now I have 6 gb of data partition which i can use to transfer files or move apps from nook's internal drive. The new 8gb card with cm7 image booted without any issues keeping my original settings of 4gb. One thing to mention that somehow it did not work on one pc with windows xp (kept getting write error on win32diskimager program)but worked on my laptop with windows 7.
That is exactly how I have done it in the past as I described in my first post. I don't know why a person would have trouble with it unless there was a format issue (i.e. ntsf, etc).

[Tutorial] How to partition your SD Card for DT: Apps2SD

A lot of custom ROMs out there for the Android utilizes Dark Tremor’s A2SD which of course enables you to store your apps and phone’s dalvik cache in the SD card and saves you more free memory for more apps.
This is good especially if you download lots of games to your phone.
Requirements:
SD card reader – since you need to connect your SD card to the PC.
A partitioning tool. – I suggest Partition Wizard by Mini-tool – http://www.partitionwizard.com/free-partition-manager.html
How to partition the SD Card:
Connect your SD card to your PC and let Partition Wizard detect it.
Delete all your current partition in the SD card. Make sure to back up your files first.
Using the partition wizard, create a Fat32 filesystem. Make sure that it’s set as primary and has a 32kb cluster. Leave space for the ext4 partition. (if your SDcard’s size is 4gb, then just allocate around 3.4gb for the Fat32 parition.)
Using partition wizard, create a ext4 filesystem on the remaining unallocated parition of the SD card. It is advisable that you allocate 512mb for your ext4 partition.
Once done, you can now flash/install your custom Android ROMs that utilizes Darktremor’s Apps2SD.
PS: I wrote this because I always see people asking everywhere on how to partition their SD cards.
And what about this tutorial..?
Just use Search Button...
http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
ingbrzy said:
And what about this tutorial..?
Just use Search Button...
http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
Click to expand...
Click to collapse
I admire you for searching that. I found that too. However, I'm getting tired of newbies asking around the threads and just getting that same answer.
That's why I wrote this. The intention of this is good. Don't spoil it.
Yes you are right...
For people is easier just ask a question than try to search answer by yourself...
Thanks this gonna help once i get the card reader xD
Sent from my GT-S5830 using XDA App
Thanks for this
hey bro. maybe you could add some reasons why ext4 is better than ext2 or ext3. thanks!
mine says damaged sd card. format? like that.
help!
do i really need a card reader? Is it not okay to just connect phone to PC with SD card in it?
zuheltzer said:
do i really need a card reader? Is it not okay to just connect phone to PC with SD card in it?
Click to expand...
Click to collapse
Nope. Most SD cards will have a problem when flashed that way. So better use a card reader.
How do i know if the script is working? I've started A2SDGUI, but in the tab that should show me used and free space SD-EXT entry is the same as /cache, that is 24mb total (I've created 512mb ext4 partition).
Does the DT: Apps2SD work on gingerbread already? it has been the only thing stopping me from upgrading ever since couldn't stand that out of memory notification
Has anybody tried partioning their 2gb default sd card?
Sent from my GT-S5830 using Tapatalk
Can I have ext4 on my 8GB SDHC Card??
danish. said:
Has anybody tried partioning their 2gb default sd card?
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
It can be partitioned but not advisable if you use stock samsung 2gb class 2 for a2sd, yes a2sd will run but it may give you a poor phone performance. buy a class 4 atleast sd card.
AxleFolie said:
Can I have ext4 on my 8GB SDHC Card??
Click to expand...
Click to collapse
Yes you can partition ext4 on your 8gb sd card, i recommend 1gb for ext4 if you play heavy games. BTW you can adjust the size of partition using minitool partition home, search the forum for link.
royskeyz said:
Yes you can partition ext4 on your 8gb sd card, i recommend 1gb for ext4 if you play heavy games. BTW you can adjust the size of partition using minitool partition home, search the forum for link.
Click to expand...
Click to collapse
Oh btw i got class 2 8gb sdhc card..
AxleFolie said:
Oh btw i got class 2 8gb sdhc card..
Click to expand...
Click to collapse
oh! you can try if you observed laggy poor performance it could be due to your low class sd card.
royskeyz said:
oh! you can try if you observed laggy poor performance it could be due to your low class sd card.
Click to expand...
Click to collapse
Can you link me on how to make ext4 im having a hard time.. Btw, im using FirstUA V1.1 Rom..
AxleFolie said:
Can you link me on how to make ext4 im having a hard time.. Btw, im using FirstUA V1.1 Rom..
Click to expand...
Click to collapse
Are you kidding me? its in the first page on this thread mate.

(Tutorial)How to use Swap!

This is my first first Tutorial thread in xda!
So,don't mind me and forgive me If i am done wrong something!
Swapper is simple application for "extending memory". Helps when you need some memory for non active applications (like music player + browser + maps + etc...).
Requirement: root, SD/SDHC card and custom kernel that support swap .
Warning: SD card will be used as swap space. It can (and will) shorten SD card lifespan.
1.Downlod Swapper 2 from market! Link: https://market.android.com/details?id=lv.n3o.swapper2
2.Install Swapper2 normally
3.There are 2ways to swap: first use swap by partition and another one is by none partition(But If you partition you can create more 256mb)
4.For using swap by partition u must partition your sdcard by using minitool or etc....(NOTE: partition to linux swap and primary)
5.After you partition you turn off yor phone and then back to xrecovery or cwm to clear cache partition
6.turn on n then open swapper2 normally and go to Preferences of swapper then you check safe to unmount and safe to remount
7.and then you go adavaned preferences and check the Use swap partition and Swap partition set it to /dev/block/mmcblk0p2
8.after that go back to swapper2 and turn it on (wait the process when it say All done It works)
9.Another one way is none using swap partition it easy because swap create it by itself but it can't more then 256mb
10.First Open Swapper2 then go to Preferences of swapper
11.Click on Swap size and click what number that u want to swap 32,48,64..etc
12.Then go back to Swapper2 and turn it on
13.For none using swap partition method It take a while 3minutes or more depend on class of your sd card!!!wait the process untill it say All done It mean that It works
Recommend: For me,I'm using micro sdcard 16G class10 so i partition my sdcard 1500mb for swap ^^ I alway free more ram about 90 to 120
Note: for swappiness it depend on your phone!!for me i can use swappiness 100 smoothy
If you have any question you can ask me more about this
I take my time for making this thread If you think I'm helped you Just Click THANKS for me
Remember: do it with your own risk and i don't warranthy if this method cause brick your lovely x8
the primary partition must be ext or can be fat or ntfs ?!
also do u notice real improvements ?
I never understood how to do it with terminal, so thanks for your help!
darknessx10 said:
I never understood how to do it with terminal, so thanks for your help!
Click to expand...
Click to collapse
Your welcome
Sent from my X8 using xda premium
Finally a simple and fast tutorial,thanks!
ahmedz_1991 said:
the primary partition must be ext or can be fat or ntfs ?!
also do u notice real improvements ?
Click to expand...
Click to collapse
Second partition must be linux swap and primary
Sent from my X8 using xda premium
I have a problem,when i format my sd card and put swap partition on mini partition tool,when i place my sd card back to phone its says "damaged sd card"...
I have swap running on 2 x8's. 1 is using 7000mb fat, 400 ext2 and 4-500 linux swap, however i cannot see the ext and swap partitions when i connect to pc, even though everything is working fine i would like to know how i can reformat my 8gb sd back to 8gb.
The other x8 has a 2gb unpartioned sd using the other method where a 256mb swap file is created. It works fine and is simple to set up but i have over 90mb free ram on partition set up and 70-80mb on the simple method.
All mine were set up with trial and error and there was no way to really confirm it was set up properly so this thread has confirmed my setup. It could have saved me time a few weeks ago but i'm sure lots of users will find this thread very helpful.
@ mods, I think its time to refresh the stickies as some are obsolete and i believe this thread would be an ideal sticky.
@OP, nice job. Thanks for your contribution to our little x8 section
corsav6 said:
I have swap running on 2 x8's. 1 is using 7000mb fat, 400 ext2 and 4-500 linux swap, however i cannot see the ext and swap partitions when i connect to pc, even though everything is working fine i would like to know how i can reformat my 8gb sd back to 8gb.
The other x8 has a 2gb unpartioned sd using the other method where a 256mb swap file is created. It works fine and is simple to set up but i have over 90mb free ram on partition set up and 70-80mb on the simple method.
All mine were set up with trial and error and there was no way to really confirm it was set up properly so this thread has confirmed my setup. It could have saved me time a few weeks ago but i'm sure lots of users will find this thread very helpful.
@ mods, I think its time to refresh the stickies as some are obsolete and i believe this thread would be an ideal sticky.
@OP, nice job. Thanks for your contribution to our little x8 section
Click to expand...
Click to collapse
You want to know how to format your sd card with 7000mb fat32 400 ext3 linux swap 500mb
If you format it,it will back to 8Gb sd card
Sent from my X8 using xda premium
RodrigoOgasawara said:
I have a problem,when i format my sd card and put swap partition on mini partition tool,when i place my sd card back to phone its says "damaged sd card"...
Click to expand...
Click to collapse
Let partition by this method:
1.connect your sd card to pc
2.open minitool partition
3.right click on your fat32 sd card and choose the word resize
4.after you resize u will see your partition
5.right click on your new partition and choose word create
6.partition it to linux swap and primary
7.apply it and wait the process
7.Done and Cheers
Sent from my X8 using xda premium
what i do wrong?
its working only for custom kernels?
Well i have a 4gb class 4 sd card.I;ve made'it 3.2 gb fat32 128linux swap and the rest ext 3.And i have min 90 mb free mem ,max 120.
RodrigoOgasawara said:
I have a problem,when i format my sd card and put swap partition on mini partition tool,when i place my sd card back to phone its says "damaged sd card"...
Click to expand...
Click to collapse
Don't forget to format after partitioning!
And with minitool for working swap and ext you must connect sd as phone's mass storage->not CWM mount usb storage, booted ROM and connect phone to PC.
Then you'll able to partition your sd. After all FORMAT and all will work.
+1 When you have a 4gb sd you must create FAT, when you have above 4 gb create FAT32. Create first a primary FAT(32), then a primary SWAP/EXT
I partitioned my SD card (4gb class 4) with this propieties
Primary: 3.4GB
Logical: 313MB
But when I put the sd card into the phone, it doesn't recognizes the SDCard.
It's weird because when I browse in my SD card via cwm it shows my files and folders :Z
Anyone knows what the hell i'm doing wrong?
junghyun01 said:
You want to know how to format your sd card with 7000mb fat32 400 ext3 linux swap 500mb
If you format it,it will back to 8Gb sd card
Sent from my X8 using xda premium
Click to expand...
Click to collapse
No, it is only showing as 7gb. When I format it stays at 7gb and I can't see the other 2 partitions on the PC. They work with links2sd and swapper. Do I need to remove anything from the rom connected with apps2sd, I'm using kuyadroid with alfs kernel. I have removed everything from the modules folder but my phone storage is low and links2sd says only 2% of ext2 been used even though it successfully links my apps, or so it claims. Sorry for all the questions but if I know then I can help others thanks for your reply
Sent from my E15 using XDA App
darknessx10 said:
I partitioned my SD card (4gb class 4) with this propieties
Primary: 3.4GB
Logical: 313MB
But when I put the sd card into the phone, it doesn't recognizes the SDCard.
It's weird because when I browse in my SD card via cwm it shows my files and folders :Z
Anyone knows what the hell i'm doing wrong?
Click to expand...
Click to collapse
all partition MUST set in PRIMARY no LOGICAL... For me let swapper2 make your sdcard partition is the safest & easiest way,@author 1question do i need to format my sdcard when i let swapper2 partition my sdcard...
Here is a easy tutorial for partition !
http://forum.xda-developers.com/wiki/SD_card_partitioning
corsav6 said:
No, it is only showing as 7gb. When I format it stays at 7gb and I can't see the other 2 partitions on the PC. They work with links2sd and swapper. Do I need to remove anything from the rom connected with apps2sd, I'm using kuyadroid with alfs kernel. I have removed everything from the modules folder but my phone storage is low and links2sd says only 2% of ext2 been used even though it successfully links my apps, or so it claims. Sorry for all the questions but if I know then I can help others thanks for your reply
Sent from my E15 using XDA App
Click to expand...
Click to collapse
you cannot see the others partition because the card reader or phone shows the 1st partition,you can see the other partition by using partition tool,coz the 1st partition is only mounted which is fat32...

[Q] Use the SD card for storage "Android SD"

Hi,
I wonder if someone can help me, I've got WP7.5 install as a NAND installation, with Android 4.0.4 as a SD installation. Both work brilliantly, although I do have some slight problems.
Android won't detect an SD card installed, so I can't use some apps, that require an SD card to be present.
Does anyone know if there is a fix for this, surely I'm not the only person in this position.
Cheers
I'm guessing it's because your SD has been formatted specially by WP, and Android can't read this. Your FAT32 partition is probably too small for anything to be stored in it.
The Fat32 partition is 1.6Gb.
Is it worth making that bigger, or creating another FAT32 partition?
Cheers
Hmm, I'd guess that you wouldn't have any more than 200-300MB free on your SD as read by SD Android then. I don't know how much an SD Android build takes up but the data.img is at least 1GB of that. As for increasing the partiton/creating a new one, I don't actually think that's possible without losing your data is it?
Hi,
Thanks for your help.
I'm not too fussed about losing anything...
Here is what I have just tried without any success.
I have a 8Gb card partitioned like this.
1.*Gb
Primary, FAT32, (Android SD install)
2Gb
Primary, FAT32, (My hope would be that Android would see this as the SD card)
4Gb Other (WP 7 partition)
No luck unfortunately, any ideas?
Cheers
Are you sure you're using an 'unlockable' WP7.x ROM? If so, try formatting the storage card to normal and flash a Android build, see if it utilises the memory card like normal, if it does, then I would say that you're doing something wrong when setting it up.
Just double check each step of a tutorial (example: this one) twice and hopefully you'll only have to flash one more time.
Why do you have 2 fat 32 partitions ?...just use one fat 32 partition..in regular sd android....data image is used as internal memory and fat 32 part as sd card
I believe your second partition is not being recognised...make only one fat 32 partition you don't need two
Sent from my HTC HD2 using Tapatalk 2

Categories

Resources