I have seen too much people asking how to install Cyanogen (Not Official),so here i bring you this tutorial that i followed and installed Cyanogen successfully on my SGA.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure you have rooted phone and Gingerbread 2.3.4
Download this: http://www.multiupload.com/JGZE0DM8NU
And extract it on a folder.
Password: adgoosuc
These are the simple steps:
1. Copy those 3 files in your SD CARD
2. Turn off your phone
3. Reboot on recovery.
How? Press power button and home button until you see "SAMSUNG" Text.
Then you will have something like this:
Volume buttons for go UP & DOWN
Home button for select (click)
4. Click on apply sdcard:update.zip and select the file named "ClockWorkModAce.zip" (if you dont know where is that go to step 1)
5. Then some text will appear ... and after it finishes reboot your phone by clicking "reboot system now".
Then turn off your phone again and enter recovery AGAIN.
6. Select "Install ZIP from sdcard" and install the file named "cm-7.1.0-RC1-Cooper-KANG-Grif_07.zip"
7. When that finish,DON'T REBOOT,just install "cm-7.1.0-RC1-AllFixes-Grif_07.zip" and when that finishes you can reboot.
And that's all ! Now you have Cyanogen MOD 7.1 RC1 running on you Samsung Galaxy Ace without any problem.
I hope this works for you as for me.You also can hit THANKS button for me :$
To think that you forgot to ask them to mount /system and /data
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
To think that you forgot to ask them to mount /system and /data
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I just installed it like i write it.No mount anything...
It's possible to flash this rom over a 2.3.3 stock rom? Because Grif07 in his post about this rom doesn't say anything about rooted phone or android 2.3.4 as requirements to install this rom.
MeltingSnowman said:
It's possible to flash this rom over a 2.3.3 stock rom? Because Grif07 in his post about this rom doesn't say anything about rooted phone or android 2.3.4 as requirements to install this rom.
Click to expand...
Click to collapse
u need any gingerbread 2.3.x version.
so 2.3.3 stock is fine. but u do need ClockWorkMod Recovery.
ok...thanks. P.S. I will lose internet capabilities with CM 7.1?
MeltingSnowman said:
ok...thanks. P.S. I will lose internet capabilities with CM 7.1?
Click to expand...
Click to collapse
I don't understand you (i dont speak too much english),i hope somebody gives you an answer.
MeltingSnowman said:
ok...thanks. P.S. I will lose internet capabilities with CM 7.1?
Click to expand...
Click to collapse
what do you mean like .... wifi n 3g ?? whatever mayb the case no u will not loose them.... they work fine on it .
is the battery on this mod last longer?
EmoBoiix3 said:
To think that you forgot to ask them to mount /system and /data
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
dude, no need to mount data and system when flashing cm over stock rom. Just a full wipe on everything and then flash....
philipxtian18 said:
is the battery on this mod last longer?
Click to expand...
Click to collapse
Stock has best battery,no doubt..But cm7 is not unusable or anything
itasoulas said:
dude, no need to mount data and system when flashing cm over stock rom. Just a full wipe on everything and then flash....
Click to expand...
Click to collapse
Yes! I just lost my apps by wiping but CM7 is really nice on Ace.
Sent from my SGA
Adgoosuc said:
Yes! I just lost my apps by wiping but CM7 is really nice on Ace.
Sent from my SGA
Click to expand...
Click to collapse
it is expected to loose all your data when you're flashing a custom rom over a stock one. Wiping is required cause you'll end up with a messedup phone.
No offence, but how come you right a guide for flashing when you don't know what has been said above
Adgoosuc said:
Yes! I just lost my apps by wiping but CM7 is really nice on Ace.
Click to expand...
Click to collapse
Use Titanium Backup for save your apps and data files
itasoulas said:
it is expected to loose all your data when you're flashing a custom rom over a stock one. Wiping is required cause you'll end up with a messedup phone.
No offence, but how come you right a guide for flashing when you don't know what has been said above
Click to expand...
Click to collapse
I don't understand some words and terms because my native language is Spanish.
prateek_gemini said:
what do you mean like .... wifi n 3g ?? whatever mayb the case no u will not loose them.... they work fine on it .
Click to expand...
Click to collapse
I meant 3G conection because I know wi-fi works well on cm7. (If I back up the stock rom with CWM i will be able to restore that backup over cm?)
MeltingSnowman said:
I meant 3G conection because I know wi-fi works well on cm7. (If I back up the stock rom with CWM i will be able to restore that backup over cm?)
Click to expand...
Click to collapse
3G connection works fine mate.
When I try to install clockworkmode I get installation aborted. The phone is rooted.
What do I do wrong.
stanmarx said:
When I try to install clockworkmode I get installation aborted. The phone is rooted.
What do I do wrong.
Click to expand...
Click to collapse
Try to check your zip file make sure it is signed and flashable.
I suggest re-downloading again the flash file cwm.
Press thanks if it helps
Related
WARNING: THIS WILL WIPE /DATA! All of your data will be erased!
So the first thing I did when I got home from work is root my Thunderbolt and create a backup of a fresh wipe of Thunderbolt stock.
First off:
Android OS: 2.2.1
Device: mecha
ROM Name: 1.12.605.6
Rooted (Unsecured boot.img): Yes
Rooted (Superuser.apk + su): Yes
Busybox Installed: Yes
Nano text editor installed: Yes
/system/framework deodexed: Yes
/system/app deodexed: Yes
ROM will wipe data: Yes
Second:
I have tested it does work in its entirety. I had to remove the lines where it flashed boot.img but that is still in the .zip it just doesn't do anything with it since that code in the script it throws errors but without it flashes fine.
Third:
This is completely stock so it does contain the bloat. You can remove it as you see fit using Root explorer or freeze them with titanium backup.
Link:
Debloat: http://www.megaupload.com/?d=F60KZRU0
Bloated: http://www.megaupload.com/?d=RNUVRAM0
Credits:
dsixda for the kitchen to de odex this sweet device
ROOT TEAM:
"Scotty2, jamezelle, jcase, and all of Team AndIRC
Testers, especially ProTekk and Trident
Thanks to scotty2 for WPThis
Busybox was pulled from a CyanogenMod ROM, source should be available here
psneuter was pulled from somewhere, credit to scotty2, source here
All firmware credit goes to 911sniper
Jaroslav from Android Police for editorial help"
Thank you ALL for making this possible.
How do we install this Rom? I tried with CW recovery and no luck.
Thanks
I can flash it via CWR but it just hangs at the boot screen and won't go any further... I wish this would work, I just want a factory rooted/deodexed rom without anything removed so I can choose what stays and what goes.
JAYNO20 said:
I can flash it via CWR but it just hangs at the boot screen and won't go any further... I wish this would work, I just want a factory rooted/deodexed rom without anything removed so I can choose what stays and what goes.
Click to expand...
Click to collapse
Might wanna try Fastboot for flashing. IE replace the file in the permaroot tutorial with this one. Then skip the root steps as this is already rooted.
Str0ntium said:
Might wanna try Fastboot for flashing. IE replace the file in the permaroot tutorial with this one. Then skip the root steps as this is already rooted.
Click to expand...
Click to collapse
so we need to rename it to PG05IMG.zip?
or is there a better way?
Sorry guys for leaving you all hanging. I do have a newer .zip to flash but it doesn't have any of the bloatware (CityID etc) and has some google apps that are on market (Except for quicksearch because it stops the search button from working) to /data/app.
I will upload that later if you like .
Please do. This file is very much appreciated.
Sent from my Thunderbolt using Tapatalk
I would really like to have the file that is deodexed but still contains everything else... can you reupload that one too?
Both are up now. Enjoy.
gonna try something so nvm
Can someone explain exactly what Deodexed means.
Thanks
Jrocker23 said:
Can someone explain exactly what Deodexed means.
Thanks
Click to expand...
Click to collapse
Deodexed in a sense means you can edit and change the files as you like allowing custom figures,images, and animations in place of the stock. It basically allows for people to completely customize rooms to make the run and look as they like. Odexed is completely opposite and you would know a rom is odex because there are .odex files next of ever .apk in the system/app/ folder. You cannot change anything in a odex rom. The completely stock rom is odexed.
mjhuffer said:
Deodexed in a sense means you can edit and change the files as you like allowing custom figures,images, and animations in place of the stock. It basically allows for people to completely customize rooms to make the run and look as they like. Odexed is completely opposite and you would know a rom is odex because there are .odex files next of ever .apk in the system/app/ folder. You cannot change anything in a odex rom. The completely stock rom is odexed.
Click to expand...
Click to collapse
Understood, thank you vm... appreciate the info..
Thank searched high and low for a rom like this. Very much appreciated.
I installed the debloated version and now I have no 3G or WIFI. I'm stuck in 1X and when I try to enable WIFI I get a message that simply states "Error".
http://gititbit.ch/tHu3 - signed_032111_214510.zip
100mbit mirror of the debloated.
Thank you very much for this!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Axiom119 said:
I installed the debloated version and now I have no 3G or WIFI. I'm stuck in 1X and when I try to enable WIFI I get a message that simply states "Error".
Click to expand...
Click to collapse
Put the back cover on, give it about 10 minutes. The back cover is required for 3G/4G.
foszz said:
Put the back cover on, give it about 10 minutes. The back cover is required for 3G/4G.
Click to expand...
Click to collapse
I think ur 7 months or so late.
Sent from my ADR6400L using XDA App
Dropbox download: http://db.tt/dCJgN48P
Google Drive download: https://docs.google.com/open?id=0B03kuDevWNTFcE1PUXFSMDVtVkU
Multiupload download: http://www.multiupload.nl/8Y1Y73LUC1
Read instructions before ask silly questions!
This is the latest Jelly Bean Leak.
Lots of the users couldn't install the OTA, so here's the full version.
How to install:
Extract the zip in SDCard --> clockworkmod --> folder (for example JB) --> files here
Go to CWM --> Backup & Restore --> Restore from internal storage
The ROM is NOT rooted.
You should root it yourself.
Enjoy
MODEM XXDLH4: http://developer.clockworkmod.com/downloads/51/3572/radio-LH4-i9300-signed.zip (thanks to Cyanogenmod)
Please say thanks If this helped you!
Edit: I recommend you to wipe dalvik cache, battery stats & cache partition before you run the rom (for best smoothness and no FC)
Edit 2: If for some reason you can't find clockworkmod folder (to restore the backup), make a new backup and then replace the files from your backup with the files from the ZIP I provided.
Edit 3: MD5 checksum mismatch only happens when you try to install the whole zip file which is wrong! Extract like it's stated in the instructions.
Edit 4: I use some settings on stock that makes it faster for me:
- Disabling all animations in developer settings (or at least 0.5 to windows animation)
- Deleting all widgets from the homescreen
- Disable S Voice launch by homescreen and voice turnon (drain battery)
- Freezing/uninstalling all stock bloatware (with Root Uninstaller Pro) [AllShare, Google+, Yahoo News, Weather, Samsung Apps, Video Hub, Music Hub, etc etc]
- GPU rendering
490 MB Free RAM at final
Edit 5: You can restore this backup on every rom you want.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits: samsung-updates.com (for the hard-OTA-install)
Nice one!
Few users already reported it's working. Enjoy :laugh:
Rooted :> ?
Jack Barrett said:
Few users already reported it's working. Enjoy :laugh:
Click to expand...
Click to collapse
yup, working flawless.. do u have tried LH4 Modem??
So does this cut out flashing stock rom via odin etc? I usually just *2767*3855# to clean up then flash a rom in cwm.
Sent from my GT-I9300 using xda premium
kdogguk said:
So does this cut out flashing stock rom via odin etc? I usually just *2767*3855# to clean up then flash a rom in cwm.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Yes, you can flash it straight forward after wipe your old rom.
But if you have any EXT4 mods then you need to flash stock rom first.
So I don't get it.. what's the difference between DLH4 and BLH4
Sent from my Nexus 7 using Tapatalk 2
Thanx.
kdogguk said:
So does this cut out flashing stock rom via odin etc? I usually just *2767*3855# to clean up then flash a rom in cwm.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
This CANNOT be flashed with Odin. Only CWM with the instructions I've written.
YoungAceAtlanta said:
So I don't get it.. what's the difference between DLH4 and BLH4
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
It's the same ROM. The author wrote BLH for some reason.
Thanks mate. Did you find out if it's rooted?
Sent from my GT-I9300 using xda premium
when i choose to restore, it keeps saying it can't find any files, not sure what I'm doing wrong. its on the root of my internal storage, and i also put it in the clockworkmod folder and it can't find the backup
yaro014 said:
Rooted :> ?
Click to expand...
Click to collapse
Not rooted.
. . / Please delete
Kutthoat5150 said:
when i choose to restore, it keeps saying it can't find any files, not sure what I'm doing wrong. its on the root of my internal storage, and i also put it in the clockworkmod folder and it can't find the backup
Click to expand...
Click to collapse
Try with advanced restore.
yaro014 said:
This one is full rom and its OTA which mean this supposed to be more stable
The old one is just a part of the rom. Its not complete = unstable at all
Click to expand...
Click to collapse
This one is full room LG8 + OTA updated to Jelly Bean XXDLH4, restored to factory settings, cleaned cache and packed as nandroid backup.
Lots of people had problems installing the OTA (including myself).
That's why I made it so people can enjoy it faster without spent nerves.
Jack Barrett said:
This one is full room LG8 + OTA updated to Jelly Bean XXDLH4, restored to factory settings, cleaned cache and packed as nandroid backup.
Lots of people had problems installing the OTA (including myself).
That's why I made it so people can enjoy it faster without spent nerves.
Click to expand...
Click to collapse
I thought hes asking about previous leak compares to this one.. anyway.. my fault
Jack Barrett said:
Try with advanced restore.
Click to expand...
Click to collapse
still can't find any files, I just place the Zip files in my root folder correct? or do i need to extract the files from the zip
Do I install each of the 5 files individually? e.g. system, img etc? Thank you.
Androidiani ROM RC3 [6-9-12]
Hi XDA,today I want present you the "Androidiani ROM" or the ROM of http://www.androidiani.com/forum/ .This ROM was made from the Androidiani Dev-team whose members are :
- theflanker
- dema121
- matt96g
I also want to thank for the support and for small changes:
- xDaZe
- erghetto
- erok
- SparkZ
- AgoDrago
- OrlaTunzTunz
- GalaxyAceICS
- Cleofra
- djpredator17
- mik90
LINK DOWNLOAD
http://www.mediafire.com/?8j3vai1310vwa3r
SCREENSHOT:I will add later
INSTALLATION PROCEDURE:1.(recommended) before you begin installation is recommended to do a backup so that you can revert back in case of problems.
2.Copy the file to install the ROM in the sd-card, reboot and access the CWM
3.Wipe data / factory reset, Wipe Cache and Wipe Dalvik Cache (in advanced) [All your data will be deleted]
4.From mounts and storage do a format / cache, format / data, format / system, format / sd-ext
5.Also from mounts and storage selected mount /date
6.Install zip from SD card -> Choose zip from SD card, select theZip and install
7.Again Wipe data / factory reset, Wipe Cache and Wipe Dalvik Cache
8.Restart selecting "Reboot system now"
If in the first boot remains the word "android", remove the battery and restart the device.
BUGS:everything works
FEATURES:Based on CyanogenMod 7.2 by VO-1
Holo laucher
Androidiani app system
VoiceSearchk @. apk
AudioFixk @. apk
GPS fix
Adrenaline Engine 4.2
AdrenalineBoost
30 steps volume
Modded host file
Framework deodexato
Tweaks in various build.prop
Kernel Firekernel 22/07/2012
Beats audio
Increased sensitivity touchscreen
Settings in ICS style
Gplay latest version
Sounds sgs3
Flashplayer
Theme GingerIX (hybrid Gingerbread / IceCreamSandwich)
browser modded
Background default custom
Theme ICS ThemeChooser
Link 3d in Androidiani forum http://www.androidiani.com/forum/modding-samsung-galaxy-ace/158747-guida-rom-04-09-12-rc3-androidiani-rom.html
First waiting for screenies
Hey!Thanks for sharing the ROM! If everything works, why RC3?
Screens? It is a patch for Big Photo in Call Screen, here: http://forum.xda-developers.com/showthread.php?p=30314167#post30314167
You can download it from here: http://www.mediafire.com/?xzr7rk2u1zqqd9l
I didnt try the patch, make a backup before.
Screens for the patch:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THANKS to Cryss for making the patch !!!
faceliler said:
First waiting for screenies
Click to expand...
Click to collapse
You can watch some screen in my gdrive folder (they are in Italian)! link
When matt have time he will upload different screen and in English!
TJ_Ahluwalia said:
Hey!Thanks for sharing the ROM! If everything works, why RC3?
Click to expand...
Click to collapse
Because we added a lot of things in the various release (in italian)! We are working to a final version! But we think that it won't be very different from RC3!
The stk apk is working? Because I have a postemobile sim.
Grazie
Inviato dal mio GT-S5830 con Tapatalk 2
Downloading ROM Now
Will Upload Screenies In English
can someone confirm it doesnt!
looked great but............................... dont tell me it has the dodgy rom name on the notification pull down?
gonna have to get this, looks good
Change it using uot.:thumbup:
Sent from my GT-S5830 using xda app-developers app
I followed all steps correctly but installation aborted
Sent from my GT-S5830 using xda app-developers app
Italian good Job
Hey , I have an idea !
Maybe u can remove the ICS-styled settings .
Then it can fully support multi-languages .
But the Status Bar in ICS-like will be better .
Just for some suggestions , hope your ROM can be better and better !!
B A D R I said:
I followed all steps correctly but installation aborted
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
yes same here, just wouldnt get passed the install zip and I followed all the instructions except I'm not gonna format my sd for this!
Battery life?
Thanks
kelalitillo said:
Battery life?
Thanks
Click to expand...
Click to collapse
same at gingerbread rom ,now I'm doing some screens and then I will upload those...
B A D R I said:
I followed all steps correctly but installation aborted
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
phil boob said:
yes same here, just wouldnt get passed the install zip and I followed all the instructions except I'm not gonna format my sd for this!
Click to expand...
Click to collapse
Have you do a full wipe??And mount /data after installation??
not after but before the installation!
dema121 said:
not after but before the installation!
Click to expand...
Click to collapse
Yes Yes
Inviato dal mio iPad con Tapatalk HD
matt96g said:
Have you do a full wipe??And mount /data after installation??
Click to expand...
Click to collapse
yes I followed all instructions, dont know why it aborted, didnt format sd ext but then I need the stuff on there and not had to format this with other roms?
It just aborts the installation at the first load, which means I cant really wipe stuff after its installed?
I'll try again and let you know if successful.
Root FJ10 Without Custom Kernel
As we all know FJ10 has been released and is floating around the internet, and iv'e decided to share the way i rooted the leak (International SGS II) using stock samsung recovery
Credits
Chainfire CWM-Supersu
Sextape Leakrwilco12 Continue to hosting leak
What you need
PC/MAC/Linux
ADB
USB Cable
Phone
CWM-SuperSU-v0.97.zip
There is two ways to flash the root package in custom recovery (sorry i keep forgetting the other way)
Thank You Sh4Dy for reminding me
Flash Trough Update
1) Download CWM-SuperSU-v0.97.zip
2) Rename CWM-SuperSU-v0.97.zip > update.zip
3) flash as an update
Instructions
1) Enter Recovery mode by holding power+volume up.
2) Connect USB Cable to the phone and PC
3) Choose Install Update with adb
now
4) Now in your terminal/CMD write adb sideload CWM-SuperSU-v0.97.zip
5) Look at the screen and you will see the update package being installed
Congratulations you got now a rooted FJ10 leak without flashing a custom kernel
Proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks, but I get stuck at 3.
I go to search -> cmd and then I type adb sideload CWM-SuperSU-v0.97.zip in it. I think this is wrong but I never worked with ADB.
how it works now? i don't get it also
dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Why is it even in dev section?
Spyr0s said:
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Click to expand...
Click to collapse
Will try that tomorrow!
Verstuurd van mijn GT-I9100 met Tapatalk
dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Make sure you have adb installed on your pc
after that begin with step 1
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Same thing here
wrong thread. plz delete
ssilviu said:
Same thing here
Click to expand...
Click to collapse
did you also use the supersu provided in op?
Sh4Dy said:
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Click to expand...
Click to collapse
did you use: http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Click to expand...
Click to collapse
yes i did, as i know this will work with it too
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
bogdan1980 said:
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
Click to expand...
Click to collapse
that isn't mobile odin problem, its wiped automatically
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
.
Click to expand...
Click to collapse
failed to mount sdcard
Sh4Dy said:
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Click to expand...
Click to collapse
i added your instructions to OP and added you as credit for reminding me :highfive:
ssilviu said:
failed to mount sdcard
Click to expand...
Click to collapse
This is why adb sideload is powerful (as on sprint we were never able to access sdcard)
If you want, I can give proof, I'm currently restoring apps from Ti Backup Pro
i did almost everything possibly i could like
applying update.zip from sd card using stock recovery mode as well as cwm recovery
tried with one click root and two more software (forgot the name)
tried with universal honeycomb root (something like that)
but no use
and here is what i got
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its just a cheap phone so i don't care about bricking my phone
sameerveda said:
i did almost everything possibly i could like
applying update.zip from sd card using stock recovery mode as well as cwm recovery
tried with one click root and two more software (forgot the name)
tried with universal honeycomb root (something like that)
but no use
and here is what i got
its just a cheap phone so i don't care about bricking my phone
Click to expand...
Click to collapse
Did you rooted using cwm? Try root again. Is your cellphone the GT-S5360 version?
Try updating superuser.
From: Somewhere In Neverland
sameerveda said:
i did almost everything possibly i could like
applying update.zip from sd card using stock recovery mode as well as cwm recovery
tried with one click root and two more software (forgot the name)
tried with universal honeycomb root (something like that)
but no use
and here is what i got
its just a cheap phone so i don't care about bricking my phone
Click to expand...
Click to collapse
Try this !!
Ya Through CWM u can easily root ur phone....... Dont try to install apk directly
Try This Guid Bro... http://forum.xda-developers.com/showthread.php?t=2085390
Sent from my GT-S5302 using xda premium
sameerveda said:
i did almost everything possibly i could like
applying update.zip from sd card using stock recovery mode as well as cwm recovery
tried with one click root and two more software (forgot the name)
tried with universal honeycomb root (something like that)
its just a cheap phone so i don't care about bricking my phone
Click to expand...
Click to collapse
Itz Easy Bro here is another type of root.
http://forum.xda-developers.com/showthread.php?t=2380849 go to this forum it will help you to root the phone
Hit like if i helped you
sameerveda said:
i did almost everything possibly i could like
applying update.zip from sd card using stock recovery mode as well as cwm recovery
tried with one click root and two more software (forgot the name)
tried with universal honeycomb root (something like that)
but no use
and here is what i got
its just a cheap phone so i don't care about bricking my phone
Click to expand...
Click to collapse
Hey buddy u can use unlockroot a PC software otherwise universalgbroot for your phone.
It will work sure.
To install cwm follow link
http://rootlord.blogspot.in/2013/05/root-install-cwm-recovery-samsung.html?m=1
Say thanks to me....oh yup I'm joking?
* simply go stock recovery
* wipe data and cache
* turn on your phone
* try update.zip
* and see you rooted you phone
* if this doesn't works then flash it by odin and try root again...
NO ONE IS PERFECT
going nuts..
thanx guys for ur inputs...but i did all of these, no use
except flashing, is it safe to flash before rooting?
and all of rooting softwares i downloaded are identified as virues by my antivirus (norton)
so i desabled the antivirus & that tried but it still no use
sameerveda said:
thanx guys for ur inputs...but i did all of these, no use
except flashing, is it safe to flash before rooting?
and all of rooting softwares i downloaded are identified as virues by my antivirus (norton)
so i desabled the antivirus & that tried but it still no use
Click to expand...
Click to collapse
Open superuser app
On settings find update su binaries
click it
wait for it to update then after that it will ask you to restart your phone
if it fails, try flashing update.zip again
sameerveda said:
i did almost everything possibly i could like
applying update.zip from sd card using stock recovery mode as well as cwm recovery
tried with one click root and two more software (forgot the name)
tried with universal honeycomb root (something like that)
but no use
and here is what i got
its just a cheap phone so i don't care about bricking my phone
Click to expand...
Click to collapse
Ok bro, so the ROM manager app says that SU wasnt found where it should usually be. So the SU must have been extracted elsewhere which is improbable. But to fix your issue just get another update.zip and reinstall the package. If therr is an SU apk present doimg this should overwrite the exisitng one
Peace B|