Okay First of all download the following files
a)http://android.clients.google.com/packages/ota/google_crespo/VQ8PQk_V.zip (4.0.3 OTA)
b)http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip (2.3.6 Official I9020T Build)
c)http://bit.ly/su2361ef (SU flashable)
d)http://forum.xda-developers.com/showthread.php?t=988686 (Grab recovery form this thread)
e)http://developer.android.com/sdk/index.html (Grab the android SDK installer)
f)http://attachments.xda-developers.com/attachment.php?attachmentid=687157&d=1313224429 (Radio file only required for I9020A)
Okay so when done with all that proceed as follows
1) Backup your current apps using Titanium Backup (Optional/Recommended)
2) Backup(Nandroid) your rom using backup option in CWM (Optional/Recommended)
3) Do a full wipe, wipe sdcard, system, data, cache Transfer a,b,c,f to your phone.
4) Flash the 2.3.6 Official I9020T Build you had downloaded using the install zip option in CWM (IMP-DO NOT REBOOT RIGHT NOW)
5) Flash the flashable SU file you had downloaded and then reboot.
6) Once your phone is on, continue to set up your account or skip it as you wish. (Optional)
7) Open up market, download the latest SU app, Voodoo OTARootKeeper, Titanium Backup and any other app you use that requires root.
8) Open the updated SU app, hit menu button and click preferences, go all the way down, click on su binary(tap to check for updates) , and make sure it updates to v3.0.3
9) After that is done, open and allow root permissions to all your root apps. (This is important)
9.5) Run Voodoo OTARootKeeper and click on protect root, make sure all options get checked.
10) Turn off phone, keep volume up and power pressed to boot into fastboot.
11) Select recovery with volume buttons and use power to launch.
12) Once you see a android bot image and an arrow image, keep volume up pressed and press power once, then you'll see some options appear.
13) Select apply update option and find the official 4.0.3 OTA file you had downloaded and flash. Reboot.
14) Once you have booted into ICS, go to Voodoo OTARootKeeper and select resture Root, all options should now be ticked, if not something went wrong.
15) Voila, you have root. Now to get back CWM recovery you can follow this -
i) Place the recovery img file in the android sdk platform-tools folder
ii) Switch to the directory where you unzipped the Android SDK & go to "tools"
iii) Then type "fastboot flash recovery yourfilename.img" & hit enter
iv) That should do it.
v) Optionally you may do it form Rom Manager too, if it works.
16) (ONLY FOR I9020A) Reboot phone, turn it off, boot into fastboot, select recovery, CWM should launch, flash the radio file you had downloaded to get radio working on I9020A (ONLY FOR I9020A)
Root only works for the apps that were installed while on 2.3.6
http://downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip , use this root file, flash it in cwm, everything works, permissions etc.
This might work for other variants, tested on I9020A and I9020T, I take no responsibility for anything that might go wrong with your device. I take no credit for any links or procedures provided in this guide, I just tested and compiled.
Thanks and best of luck.
..........
Good guide but first two links are broken.
bajansurfer said:
Good guide but first two links are broken.
Click to expand...
Click to collapse
Thanks, fixed.
Do I really need to flash official 2.3.6 before ICS? what if I wipe and format then install 4.0 immediately?
poging22 said:
Do I really need to flash official 2.3.6 before ICS? what if I wipe and format then install 4.0 immediately?
Click to expand...
Click to collapse
Might not work, though you can try, if it fails, do it my way, also its impossible to get any kind of root that way.
Link for the ATT Radio doesnt seem to be working
Great work!
wipe SD card?
Is this necessary?
I don't think it's necessary to wipe the SD card, I followed the procedure in http://forum.xda-developers.com/showthread.php?t=1396913 and although it said my SD card would be wiped, everything was still there after I was done!
Anyone on a i9023 tried this?
Hmm...does "any version" includes M200(Korean Nexus S)?
Sent from my Nexus S using Tapatalk
http://attachments.xda-developers.com/attachment.php?attachmentid=687157&d=1313224429
I think he meant that for the 9020A radio
Link fixed, sorry for that, SD wiping might not be necessary, but I suggest as it makes it cleaner. Might work for I9023 and M200, I have no clue, maybe some experienced developer can answer that better.
Not to crap on a great tutorial, This is exactly what I would be looking for if I were not already set up and running. Last night was a dizzying whirlwind of flashing, high heart rates and finally becoming familiar with fastboot and flashing things like that.....lol
But in the end I simply found a cwm flashable zip without radio or bootloader and installed through cwm like any other rom. As far as root all I did was flash a zip file found on the forums and I was good to go.
Hi mine keeps hanging in the boot animation and can't get into recovery, what else can i do? Is my phone bricked?
little hiccup at step 12. im getting the android bot with exclamation mark but i press volume up with power and nothing happens. menu doesnt show up....
Edit: NVM... i pressed it 3 or 4 times and it finally worked
Michie23 said:
Hi mine keeps hanging in the boot animation and can't get into recovery, what else can i do? Is my phone bricked?
Click to expand...
Click to collapse
You should post it in questions, I cannot answer this.
fromthestars said:
Not to crap on a great tutorial, This is exactly what I would be looking for if I were not already set up and running. Last night was a dizzying whirlwind of flashing, high heart rates and finally becoming familiar with fastboot and flashing things like that.....lol
But in the end I simply found a cwm flashable zip without radio or bootloader and installed through cwm like any other rom. As far as root all I did was flash a zip file found on the forums and I was good to go.
Click to expand...
Click to collapse
Many ways of doing it, I just am suggesting one, the flashable zip for ics isn't available as yet, what did you flash?
i9020 keeps getting status 7 aborted and my padlock is still unlocked on t-mobile 2.3.6
Has any tried this on an i9023? Thank u
Sent from my Nexus S using xda premium
Related
Original Article​
Since the Nexus One has been updated to 2.3.4, most root applications have been patched, superoneclick root and gingerbreak dont work. However, this does (Roots to 2.3.3) without unlocking the bootloader.
First of all, huge thanks to danger-rat and Phoenix84118 on the N1 Forums and XDA for walking me through this (and holding my hand I might add)
Disclaimer: I will not be held responsible for your phone. If your phone explodes/bricks or even releases the plague, it is your fault, and your fault alone. You take all responsibility for going through with this tutorial.
Downloads you need:
You can download these before hand or just download them as you read the guide.
[step 01] http://goo.gl/fWoS6
[step 08] http://goo.gl/ajTCV (get the latest version)
(edit: the link seems to be down, you will have to regester on xda and download it from the bottom of the post, v1.9.5 should work, http://goo.gl/lFTio )
[step 12] http://goo.gl/ZN5ON , http://goo.gl/4ULk and http://db.tt/ooDaCnU
1) Download http://goo.gl/fWoS6 (UNZIP THIS, then move on)
2) Rename it to PASSIMG.zip (NOT PASSIMG.zip.zip) If you can't see the '.zip', don't type it (the download already is a .zip).
3) Plug your Nexus One into the computer and mount it (or put the SD card into a card reader). Place the zip above into the root directory of the SD card.
4) Boot your phone into bootloader mode(Power + Vol-), Hold them down until you get a white screen.
5) If PASSIMG is correctly recognized, you'll see a prompt to install it (Vol+). Follow the directions. THIS WILL ERASE ALL THE DATA ON THE PHONE (will NOT erase the SD card).
6) When it's done, the phone will reboot. (Vol+)
7) Remove/rename the PASSIMG.zip file, so it won't check for it again (delays recovery mode by minutes).
8) Now to root your N1, go here http://goo.gl/ajTCV and download the latest version.
[before you continue, ensure you have the android sdk and drivers upto date]
(edit: the link seems to be down, you will have to regester on xda and download it from the bottom of the post, v1.9.5 should work, http://goo.gl/lFTio )
9) Unzip it , hook up you N1 to a pc and open up the superoneclick root program.
10) Click root, When it says: Waiting for Device, Turn USB Debugging ON
11) Install ROM Manager, open it, and click Flash ClockworkMod Recovery.
[Note if it failed, download the Superuser app from the market to update it, then reboot and su should not work, in ROM Manager, click repair]
[Before you do this step, download these and place it on your sd card: http://goo.gl/ZN5ON , http://goo.gl/4ULk and http://db.tt/ooDaCnU ]
12) Now click reboot into clockwork recovery.
-Install .zip from sdcard
-Choose .zip from your sd card
-Yes, and let the update install
13) During this process the phone will reboot twice
The first time will show you the solid X, then go back to recovery, the second time, it will show you the solid X, here, you must pull the battery before it moves onto the animation.
Failure to do this in time means youwill have to restart the entire process, as CWM and the root is lost.
14) Now boot up the phone into recovery (power + vol-) then select recovery
15) CWM should still be on there, now install a zip from sdcard and pick su-2.3.4.1-ef-signed.zip
16) Install the Recovery-Fix.zip
17) Once complete, hit back and reboot the system!
You now have root on android 2.3.3! Congratulations!
Nice. I just ran into the page by accident looking up CWM 5.x for the Nexus One.
My only suggestion would be to indicate what those links are. I personally don't like clicking on shortened links, as I can't tell what it is. Plus, this isn't twitter.
I suggest everyone wanting to do this, read all the steps carefully BEFORE proceeding. There's some stuff that's timing specific, so you have to be quick (specifically, step 13).
Nice guide though. I'm glad my help was made into a guide. I would have done it myself but.... well no I wouldn't have. I would LIKE to have done it, but I'm lazy. I'm glad you took the initiative (and thanks for the nod!).
EDIT: The guide title says 2.3.4, but end with "You now have root on android 2.3.3". One of the downloads is indeed 2.3.4. So just FYI, this IS 2.3.4 (GRJ22).
Thank you Lt.Fury, great tutorial!!!
This did not work for me.
When running SuperOneClick I get an error on Step #4
Parameter name: startIndexFAILED
Any ideas?
unfortunately i could root my n1 with superoneclick
http://wiki.cyanogenmod.com/wiki/Nexus_One:_Full_Update_Guide
i used above to unlock my n1 and it worked successfully.
I used the latest version of superoneclick and works fine!
Make sure you have all drivers updated and net framework!
Just get one error, when try install the SU from sdcard, on recovery, i couldn't install it, but no problem, CM7 have SU pre installed!
I tried through super one click but it didn't work for me..though I had all prequisitives.
Nvm the method given by cm worked for me
Sent from my sexy nexy
thanks! Nice Guide!
1. Place the superuser.zip file attached at the end of the post on your sd card.
2. Flash recovery in bootloader with "fastboot flash recovery <filename>.img". I recommend CWM 5.0.2.3 found in this thread - http://forum.xda-developers.com/showthread.php?t=988686&highlight=recovery
3. Go to recovery, in "mounts and storage" select "mount system" and then flash su-install.zip (EDIT : Mounting system not necessary, the script does it automatically while flashing the zip, but just in case)
4. Fix Permissions and reboot system.
5. Use any root explorer (i recommend ROM Toolbox, free in market) and go to /etc and either rename "installrecovery.sh" to "installrecovery.sh.old" or just delete it (its not needed).
6. There it is - Rooted ICS with a recovery that sticks.
EDIT -- IF, by any chance, after following the above steps, you find that you're stuck without a recovery (android exclamation screen), just flash a recovery via fastboot and you'll be fine. This time the recovery WILL stick. I think its something to do with the su-install.zip. I dont know for sure because I found it off the internet, its not mine.
Also, I did the superuser market update and I DID NOT lose root. I have an I9020T. So others with the same can safely update, imo.
Thanks to ab.grafix for being a part of the team.
IMPORTANT -- The su-install.zip posted previously is NOT mine. I didnt know who made it but just found out. All credit to dzo binary and Chamb'. I just made a guide coz it worked for me and I thought it might help others too.
Tested on I9020T and I9023
Don't forget to click on that thanks button if this helped.
UPDATE -- Superuser was updated by ChainsDD to support ICS 4.0.3. Thank you ChainsDD! Updated zip is now attached.
So now that we have root we need a overclocked kernel...
Sent from my Nexus S using XDA App
works great but very old cwm
Worked as described. Thanks !
Old cwm? Wich version? Is it possible to flash the latest one with rom manager?
So I am on ICS alpha13.
I9023
- wipe everything and Flash Android 2.3.6/GRK39F/XXKF1 Radio/KA3 Bootloader via clockworkmod
- Reboot in stock recovery and flash stock ICS
- Boot in ICS enable debug mode
- Run the bat follow instruction?
Is it ok?
Thanks
Hi will it work on the rogers i9023a? Can someone tell me which stock ICS to flash?
Thanks
Thanks, it worked and nothing was wiped since I was already unlocked. With apps that require root you no longer get asked for root permission nor do they show in app list in superuser but it seems to have root for now
For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.
HOW-TO:
Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).
1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip
DONE !
I just tested and is working fine.
If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.
when in BL i dont have Unlock option :|
Thanks for your effort.
But I'm curious about the flashable zip file.
What's the difference of the zip file between the orignal superuser ?
And did the recovery do some magic which CWM can't do?
After reading the script , I just see the zip is important ,maybe the recovery is doing some magic too.
I'll just flash the zip and see what happen.
ro_explorer said:
For the guys using linux (like me ) , just download the archive in the first post , retrieve from there 2 files: root.zip and recovery.img and use them with your current ADB setup.
HOW-TO:
Prerequisites: you have installed Android SDK, fastboot and you have set-up correctly the udev (ubuntu).
1. Place the above mentioned 2 files in the working directory
2. reboot in bootloader mode (vol-up + power)
3. connect USB cable
4. run "./fastboot-linux-i386 flash recovery recovery.img"
5. reboot bootloader
6. reboot recovery
7. mounts and storage -> usb mass storage
8. copy root.zip in the phone storage
9. go back -> install zip from sd card -> root.zip
DONE !
I just tested and is working fine.
If there are newbies out there trying to understand the nonsense I wrote, try following the rooting guide for Gingerbread and just use the 2 files I mentioned in this post instead of the ones in the archive for gingerbread.
Click to expand...
Click to collapse
In fact, you can use any recovery image you want, including the latest clockwork for example. I used TWRP to do this and it worked just fine. On linux, just flashed root.zip.
I've done it, thanks a lot. I've also replaced the recovery.img file with the last cmw and all went well.
Now the rom doesn't show the root permission request toast but it works however.
I'd ask if its possible to manually update the superuser.apk or its better to mantain this one?
sakisds said:
In fact, you can use any recovery image you want, including the latest clockwork for example. I used TWRP to do this and it worked just fine. On linux, just flashed root.zip.
Click to expand...
Click to collapse
Great .. I'll do that because I miss my "old" cwm
EDIT: it worked, thanks!
thanks, working here on 9023. warning for other users - do not update superuser from the app itself, or it'll stop working. at least it did for me, when i updated it to 3.0.3
confirmed working I9020a...
[INFO] Working root for ICS 4.0.3
Credits to Chamb'.
Flash via CWM and you're done.
Tested working for ICS 4.0.3 I9020T.
Enjoy!
Source: http://forum.xda-developers.com/showpost.php?p=20394635&postcount=4
It seems to have worked like a charm, thank you!
I was even able to flash the latest CWM Recovery using ROM Manager
can I flash stock 2.3.6 with cwm?
Im on ics alpha13
Anyone got a download link for the stock 2.3.6?
bratfink said:
Anyone got a download link for the stock 2.3.6?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1063664
Flash recovery with odin
Copy SU file to Root of device and flash from recovery
Files and method found at link below;
http://galaxytabhacks.com/galaxy-tab-10-1-root/how-to-root-ics-on-galaxy-tab-10-1/
Hi guys,
I have a problem.
I used this guide as well as others, and always appeared to me to superuser icon but root checker and other apk me reported that the tablet does not have root.
sorry for my english I'm slovak
winco206 said:
Hi guys,
I have a problem.
I used this guide as well as others, and always appeared to me to superuser icon but root checker and other apk me reported that the tablet does not have root.
sorry for my english I'm slovak
Click to expand...
Click to collapse
Nazdar
Actually I have the same issue as winco, I had root before upgrade to ICS.
I used this guide, everything looked fine. I have installed CWM, I have Superuser app, but tablet does not seem to be rooted. Even when I press in CWM. "fix root" it does not help at all.
Does anyone know if there is an easy way to root it without connecting the PC method?
Many thanks
Hi all, some time has passed, does anyone know? To help 2 noobs. Many thanks
Sent from my GT-P7500 using Tapatalk HD
doktorko said:
Hi all, some time has passed, does anyone know? To help 2 noobs. Many thanks
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Make it 3............same problem here
doktorko said:
Nazdar
Actually I have the same issue as winco, I had root before upgrade to ICS.
I used this guide, everything looked fine. I have installed CWM, I have Superuser app, but tablet does not seem to be rooted. Even when I press in CWM. "fix root" it does not help at all.
Does anyone know if there is an easy way to root it without connecting the PC method?
Many thanks
Click to expand...
Click to collapse
If you have CWM installed, then you need to get the superuser.zip onto the internal sdcard partition. You can download it using the tablet's browser, then use an file manager application to copy the downloaded zip into /sdcard.
Then boot into recovery and install it with "install zip from sdcard".
Defaults browser of Android 4.0.4 stock rom errors
when i turn internet in stock rom 4.0.4. it not work and put out.
who can explain to help me?
u know how to root SGT WIFI only with update 4.0.4 ?
root twrp not working
I'm a newbee with android so please appologize for stupid remakrs or questions.
I wanted to root my Samsung Galaxy Tab 10.1 with android 4.04 (Icecream I think) because I can't use my WD-elements external 2TB disk, not even with an external power supply. The disk is not recognized by the tablet, I only get a message 'High power device connected".
After some googling I saw that the S3C driver is missing. It seems that the tablet has to be rooted to be able to innstall such a driver.
I followed instructions from this thread, used Odin en then tried to reset my gt_p7500 by pressing start and volume down and then volume up.
The TWRP windows shows up but the screen is running like hell. So I cannot reach twrp to backup my old image and install the new image.
So my tablet is still not rooted.
Pleas advise me what to do.
Working method for me
scherpbierje said:
I'm a newbee with android so please appologize for stupid remakrs or questions.
I wanted to root my Samsung Galaxy Tab 10.1 with android 4.04 (Icecream I think) because I can't use my WD-elements external 2TB disk, not even with an external power supply. The disk is not recognized by the tablet, I only get a message 'High power device connected".
After some googling I saw that the S3C driver is missing. It seems that the tablet has to be rooted to be able to innstall such a driver.
I followed instructions from this thread, used Odin en then tried to reset my gt_p7500 by pressing start and volume down and then volume up.
The TWRP windows shows up but the screen is running like hell. So I cannot reach twrp to backup my old image and install the new image.
So my tablet is still not rooted.
Pleas advise me what to do.
Click to expand...
Click to collapse
I'm new to this too. Will try to help as much as I can since I've been able to successfully flash new ROM, TWRP etc., The process is as follows:
1. I found that the only TWRP recovery + ODIN combo that worked for me was the one packaged in this thread. Booted my tab into Download mode -> flashed TWRP with the ODIN (both from the package in the mentioned thread) -> Rebooted into recovery TWRP.
1a. From TWRP -> Wipe -> Cache, Dalvik Cache, Data.
2. Did 'adb push <rom_image.zip> /sdcard' (without quotes. need to have Android SDK installed in your PC with version 1.0.29 or above. Reason for version is to have 'sideload' functionality which I'll show how to use later).
3. Did 'adb push <gapps.zip> /sdcard' (same notes as in above bullet).
4. Selected "Install" option in TWRP -> Selected rom_image.zip from /sdcard location -> swiped to flash/installed the ROM (I used this ROM and find it to be the best so far and suits my liking).
5. Installed gapps in the same process as above for ROM.
6. Rebooted system.
Additionally, you could download TWRP flashable .zip file of TWRP 2.6.3.0 in order to get 'adb sideload' functionality. I found this to be a savior for me many a time.
:highfive:
Let me know how it goes. all the best flashing...
twrp is the problem!
baystallion said:
I'm new to this too. Will try to help as much as I can since I've been able to successfully flash new ROM, TWRP etc., The process is as follows:
1. I found that the only TWRP recovery + ODIN combo that worked for me was the one packaged in this thread. Booted my tab into Download mode -> flashed TWRP with the ODIN (both from the package in the mentioned thread) -> Rebooted into recovery TWRP.
1a. From TWRP -> Wipe -> Cache, Dalvik Cache, Data.
2. Did 'adb push <rom_image.zip> /sdcard' (without quotes. need to have Android SDK installed in your PC with version 1.0.29 or above. Reason for version is to have 'sideload' functionality which I'll show how to use later).
3. Did 'adb push <gapps.zip> /sdcard' (same notes as in above bullet).
4. Selected "Install" option in TWRP -> Selected rom_image.zip from /sdcard location -> swiped to flash/installed the ROM (I used this ROM and find it to be the best so far and suits my liking).
5. Installed gapps in the same process as above for ROM.
6. Rebooted system.
Additionally, you could download TWRP flashable .zip file of TWRP 2.6.3.0 in order to get 'adb sideload' functionality. I found this to be a savior for me many a time.
:highfive:
Let me know how it goes. all the best flashing...
Click to expand...
Click to collapse
The problem lies within TWRP. As I wrote: TWRP shows up but the screen is scrolling like hell. So I am not able to reach TWRP to wipe or anything at all.
so still no root I am sorry to say.
scherpbierje said:
The problem lies within TWRP. As I wrote: TWRP shows up but the screen is scrolling like hell. So I am not able to reach TWRP to wipe or anything at all.
so still no root I am sorry to say.
Click to expand...
Click to collapse
Oh ok . The version I had mentioned in my reply did not help?
I had trouble finding a guide on how to get JB working on my a501 so I'm xposting this to xda. The link to the superuserfix was dead, but my install worked without it. I take no credit for this. Written by "dime" over at Tegra Owners.
I wanted to write a consolidated tutorial for people on the latest/unrooted 3.2.1 OTA and how to flash it to rooted Jelly Bean ROM. If you follow step 1, it actually installs an old version of Touch Recovery for you, so you do not need to bother with Acer Recovery Installer. All links are derived from the FAQ stickied thread.
1. First you need to obtain root. Follow this guide to install a rooted 3.2.1 image.
All data will be lost. The 10 step guide is included as a PDF in the download:
http://forum.xda-developers.com/showthread.php?t=1307539
Confirm you have the Superuser app installed once completed.
2. Download the following 4 zip archives, put them on your A500 external SD card, and do not extract them.
Touch Recovery: MOD EDIT: LINK REMOVED
Both latest JB ROM and GApps: MOD EDIT: LINK REMOVED.
Superuser Fix: http://www.mediafire.com/?xyznxalycnw9znw
3. Reboot your A500, and hold VOL- button until you boot into recovery.
VOL- is closest to the power button, what some would consider to be VOL+ on a phone.
Once in recovery, use VOL+/- to navigate the menu and power button to select.
4. Now that you are in recovery:
Go into the Wipe menu, and do a Data Wipe.
Go into the Install Zip from SD Card menu, and install/upgrade to the latest version of Touch Recovery.
Reboot the A500, and once again go into Recovery (hold VOL-).
Go into the Install Zip from SD Card menu, and install the JB ROM.
Go into the Wipe menu, and do a Data Wipe. (yes a 2nd data wipe)
Go into the Install Zip from SD Card menu, and install GApps.
Go into the Install Zip from SD Card menu, and install Superuser Fix.
(skip Superuser Fix if there comes a time when superuser is working by default)
Reboot the device (Don't hold VOL- this time).
5. You should now be in rooted JB.
Backup your apps with Titanium Backup or MyBackup Root.
Hope this helps.
Hi and thank you for this tutorial.
Can you please fix the links of the xda threads? None of them is working
behemot24 said:
Hi and thank you for this tutorial.
Can you please fix the links of the xda threads? None of them is working
Click to expand...
Click to collapse
found new link
Mizun0h said:
found new link
Click to expand...
Click to collapse
Which JB rom are you using, how is it working? Thanks.
A 501
Do it realy works an a A 501?
Anybody already tried?
thanks
thanks for the tutorial !
Mizun0h said:
found new link
Click to expand...
Click to collapse
new new links
emmerich1234 said:
Do it realy works an a A 501?
Anybody already tried?
Click to expand...
Click to collapse
worked on a501. I went from stock gb, straight to JB.
Many thanks, great post
MANY, MANY THANKS for such a great post, it really has helped me to get out of a 'sticky situation' I now have a fully functioning and latest version of JB on my PB G100 (Now Acer A500 )
You are A STAR :highfive:
Mizun0h said:
I had trouble finding a guide on how to get JB working on my a501 so I'm xposting this to xda. The link to the superuserfix was dead, but my install worked without it. I take no credit for this. Written by "dime" over at Tegra Owners.
I wanted to write a consolidated tutorial for people on the latest/unrooted 3.2.1 OTA and how to flash it to rooted Jelly Bean ROM. If you follow step 1, it actually installs an old version of Touch Recovery for you, so you do not need to bother with Acer Recovery Installer. All links are derived from the FAQ stickied thread.
1. First you need to obtain root. Follow this guide to install a rooted 3.2.1 image.
All data will be lost. The 10 step guide is included as a PDF in the download:
http://forum.xda-developers.com/showthread.php?t=1307539
Confirm you have the Superuser app installed once completed.
2. Download the following 4 zip archives, put them on your A500 external SD card, and do not extract them.
Touch Recovery: MOD EDIT LINKS REMOVED
Superuser Fix: http://www.mediafire.com/?xyznxalycnw9znw
3. Reboot your A500, and hold VOL- button until you boot into recovery.
VOL- is closest to the power button, what some would consider to be VOL+ on a phone.
Once in recovery, use VOL+/- to navigate the menu and power button to select.
4. Now that you are in recovery:
Go into the Wipe menu, and do a Data Wipe.
Go into the Install Zip from SD Card menu, and install/upgrade to the latest version of Touch Recovery.
Reboot the A500, and once again go into Recovery (hold VOL-).
Go into the Install Zip from SD Card menu, and install the JB ROM.
Go into the Wipe menu, and do a Data Wipe. (yes a 2nd data wipe)
Go into the Install Zip from SD Card menu, and install GApps.
Go into the Install Zip from SD Card menu, and install Superuser Fix.
(skip Superuser Fix if there comes a time when superuser is working by default)
Reboot the device (Don't hold VOL- this time).
5. You should now be in rooted JB.
Backup your apps with Titanium Backup or MyBackup Root.
Hope this helps.
Click to expand...
Click to collapse
Hi there....I'm just wondering how this works!!!!!
If I understand your guide correctly then,
U run timmydeans v4 rooted HC bootloader
check s/user
Flash 1.7.3 ics recovery, the ROM, gapps and s/user fix
Then enter recovery wipe/flash etc....
So, not only did u manage to flash a recovery, u r also running JB - all without the unlocked boot loader?????
I have to give this a go....if this really does work you have made my day, lol
Sent from my A500 using Tapatalk 2
EDIT: k I've just read 60 odd pages from the JB ROM thread - and answered my own question...seems this tegra-owners ROM runs with or without the patched boot loader....interesting!
EDIT: ok i tried this anyway even tho i was running the patched bootloader....may explain my issues!!
had troubles right from the get go - The tdv4 EUU wouldnt recognise my tab in apx mode, after mucking about I got the "Pass"
rebooted into cwm - nup - stock recovery??? weird....
found a boot.p file so renamed that and installed acer recover installer to flash cwm 1.7
from there flashed cwm 1.7.3 and the rest of the guide!!!!
could not install super user fix zip kept telling me there was an error and had aborted installation...s/user seems to be working ok
so after 7 hours I have thors JB with the 3,01 BL
perhaps it could be made clearer that this guide is for tabs runnin gingerbread or HC, altho it will work on the v8 BL the question would be why you would want to....however for those who havent updated its not as complicated as trying to get ones head around patched bootloaders, nvFlashing etc.
JUST A WARNING not all ICS/JB roms can be flashed like this MOST WILL REQUIRE the patched bootloader....
ALWAYS BACKUP and ALWAYS CHECK THE DEV's OP for whatever rom u intend to fllash, and if u dont understand something
please ask stating what rom/BL config you're on and what you're trying to flash to!!! Its alot easier than trying to talk/msg your way out of a brick
Mizun0h said:
worked on a501. I went from stock gb, straight to JB.
Click to expand...
Click to collapse
After the update did you have any issues with cellular data or is that still intact too?
Thanks!
lft4ded said:
After the update did you have any issues with cellular data or is that still intact too?
Thanks!
Click to expand...
Click to collapse
I dont use a sim card. but on my a501 it asked me to please insert sim during first boot and always has a signal bar in the bottom right the indicates no reception. So most likely yes. Hope that helps.
lft4ded said:
After the update did you have any issues with cellular data or is that still intact too?
Thanks!
Click to expand...
Click to collapse
For me cellular data has worked flawlessly. It has been definitely the best rom for my a501!
Thread Closed
Thread is currently closed and links removed for the following reason;
Thor202ro rom kernel violates GPL. Otherwise know as not releasing kernel source. Most people here in the forums are well aware of the fact that non-GPL compliant kernels are not allowed to have links directly posted to them. This in the XDA rules.
The reason GPL is in place, is so that things like "carrier IQ' don't happen again. This is why kernel source should be open-source. Without it, the kernel could be transmitting personal data, and nobody would know it.
Additionally, the website in question, is a revenue generating website, and thus this also violates XDA rules by having links posted to revenue generating websites (ad-fly) to download Thors software. So this is a touchy spot.
Most people know where the site is anyhow.
And no, I am not going to re-hash the history.
Any issues regarding this, then please contact XDA Senior Moderators.
MD
How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted