Ok. So I bricked my Kindle Fire. Could not access it through ADB. Nothing. So, I followed the unbricking method with fastboot. Got me access to ADB into the kindle again.
So now, one click will not root the device to allow me to put the other images onto the device. Nor will windows 7 mount it.
One click shows that no files or folders exist for the kindle and asks me if I am sure I am running 2.0 or higher.
I can adb into it, but without root I cannot copy files into the needed directories to get it back to stock, or put CM7 on it.
When I boot, i get the kindle fire words, then a black screen. It just stays black. Its better now because at least I can ADB into it, but without root I am hosed, and one click is not working.
I turn myself over to the mercy of the Kindle gods. Any help would be greatly appreciated.
added info:
To be clear. Windows recognizes it, and ADB can connect to it and I can navigate the file structure, but it will not let me root to copy things to the file system.
When I try to use the command prompt to get to e:, a window pops up and tells me there is no disk in the drive. Please insert a disk into drive \device\Harddisk1\DR52. Then the command prompt says, The device is not ready.
With all the knowledge and information going through this forum, not even a suggestion. Pretty please......
I'm no expert sadly but do you need to root to copy over a system file? If not you could push the stockrecovery.img that you can find here (http://forum.xda-developers.com/showthread.php?t=1390773), that may be why your device isnt booting.
Where do I push that to? What location on the device? I have downloaded the image, just not sure where to put it to get it going again.
just google it how to put android etc....
I would not say I am a noob. My question is this. It will not let me mount my sdcard. So when I push update.zip to the sdcard and then try to run it from the sdcard with twrp, I get an error message saying that it cannot mount /sdcard/update.zip, so can I put update.zip somewhere else, lets say in the system folder, and run the update from there?
Not to mention, its kind of messed up that you call me a noob and point me to a video basically telling me to search the forums. Here is the problem with that. I cannot start a thread in the dev forums for the kindle fire until I post 10 times. So while you are calling me a noob and pretty much insulting me and my intelligence, I am far from a noob, I simply could not post my question in the dev forums.
lonelliott said:
Not to mention, its kind of messed up that you call me a noob and point me to a video basically telling me to search the forums. Here is the problem with that. I cannot start a thread in the dev forums for the kindle fire until I post 10 times. So while you are calling me a noob and pretty much insulting me and my intelligence, I am far from a noob, I simply could not post my question in the dev forums.
Click to expand...
Click to collapse
When you do get 10 posts and post in the Dev forum they will just tell you that you posted in the wrong forum.
Your problem has been covered many times on here if you just browse around or search you will find it.
My problem is that the sdcard will not mount, nor will it hold information. I can copy a file to it, and as soon as I reboot, it will erase that file. I have searched for ways to format the sdcard, or format everything and partition but have found no answers yet.
Just for safe measure, I did another search just now in all the kindle fire forums for "mount sdcard" and "format sdcard" and I could find no answers.
Again, when I put a file onto the sdcard, like update.zip, as soon as I run it from twrp, or even fastboot, it tells me that it cannot mount the /sdcard/update.zip file.
On top of that, when I reboot it will not keep the file, it erases it, except the twrp folder, it stays after a reboot.
I can access the system through adb, fastboot and now twrp, but cannot get it to take an update.zip file to restore it. Even though I can access it through adb and fastboot, it does not show up in my explorer window and I cannot browse the device from either a windows 7 machine or a ubuntu 11.10 machine. When I plug it in, the machine recognizes it and charges it, but wont mount it to view files.
It also returned an error saying there is no listing for the sdcard in /etc/fstab.
Not sure what to try next. Any help would be greatly appreciated.
Then you must not have read and write privlage
Sent from my Kindle Fire using Tapatalk
I dont know if it will work but it fixed mine
download this http://forum.xda-developers.com/showthread.php?t=1348782
and flash it with fastboot
fastboot flash system path\to\system.img
and you may also have to get and flash boot.img from an amazon update
asb, I do have read write, tried and verified. It is failing to mount the sdcard. Thanks Kaw. I will give that a try with fastboot.
I have twrp as the boot image. If I reflash from an update will it remove the twrp? I think it would write over it, which, if it worked, would be ok with me. I am going to try both.
When I try to flash the system.img, it tells me the remote image is to large and exits.
Related
OUTDATED[Guide] Setting up/using adb/fastboot-unlock, flash custom recovery & root
Below is a great guide to rooting, from several sources, (mostly taken from pingvinen's "An Idiot's Guide to Flashing the Xoom" and a guide by publicanimal. and I hope it helps. You can find the links to all of the files referenced below in the Xoom Heaven thread (thanks StrifeSoldierVII!)[/I]
(New thread in General Section by Jack207407 will have all the updated links for flashing
http://forum.xda-developers.com/showthread.php?t=1443110
One Stop For ROM's, MOD's, and Root Wifi-Only and 3G/4G Models)
"What you need to do can be encompassed in these following short steps (will be detailed later on) in the following order. Each step is required before you can proceed to the next one. However, make sure that you are very very careful and don't try to take any shortcuts. That may soft-brick your device, and you may have a difficult time to explain that to your wife ... You have been warned.
HERE'S THE USUAL DISCLAIMER--I AM NOT RESPONSIBLE FOR ANY HARM THAT MAY COME TO YOUR DEVICE IF YOU FOLLOW ANY PART OF THIS GUIDE--ANY RISK IS ON THE USER!
I strongly recommend you to read the entire guide before trying. In fact, read it twice to ensure that you have understood everything. If there is weird stuff that you don't understand, don't hesitate to ask. The reason for me writing this down is that I like to document what I have learned. This is to me an excellent way to ensure that I will remember what I just did. Another reason was that I could not find a single thread that encompassed all steps required. There are many different threads, but no one (that I could find) that really guides you from start to goal. So enjoy and good luck!
I would like to thank LandMaster and cam30era for helping out with advice during my initial trail-and-error session. I soft-bricked my device once and had big problems to get by point 4.3 (avoid overwriting of CWM), but with their encouragement I finally succeeded.
Just a note before we begin: the different Xoom. Models that are able to use this guide are the following:
MZ600 - stingray_cdma - Motorola US 3g Xoom (technically this device is stingray as well, but I will be using stingray_cdma as the two devices have incompatible software)
MZ601 - utms_everest - Motorola EU 3g Xoom
MZ602 - stingray - Motorola US 4g Xoom
MZ604 - wingray - Motorola Wifi Xoom
(thanks solarnz!)
___________
Overview of the 6 required steps
1. Install Motorola USB drivers for your computers (for USB connectivity) 2. Install Java SDK and Android SDK tools (for adb and fastboot commands) 3. Unlock the device for flashing (allowing replacement of recovery and boot images) 4. Install a modified recovery image (ClockWorkMod recovery for Android) 5. Root the device (Allow r/w access to the device filesystem) 6. Flash a kernel that supports overclocking etc.
Steps 1, 2, 4, 5 and 6 require that you download install, image and zip files needed for the flashing.
All this was performed on a Windows PC. Windows 7, Mac and Linux users will probably have to do some steps differently.
1.0 Install the latest Motorola USB drivers
The installation file can be found at: http://developer.motorola.com/docstools/USB_Drivers/
1.1 Install the drivers and ensure that your Xoom is recognized by the computer
2.0 Installation of development software
Android SDK and Java SDK need to be installed. You can find the installation kits here.
http://developer.android.com/sdk/index.html In case you can't find fastboot.exe, look for it here (thanks to jerrycycle): http://forum.xda-developers.com/showpost.php?p=19546334&postcount=5
Update: you could also just install the adb fastboot pack here:http://www.android.net/forum/downloads.php?do=file&id=67
http://www.oracle.com/technetwork/java/javase/downloads/index.html
2.1 Install them as any other software, making an Android SDK folder on C/.
2.2 Make sure that all the files you need are in the Platform Tools folder (fastboot, recovery image file and so on). Copy any files in the Tools folder to the Platform Tools folder if necessary. Note: If the Android SDK complains that the Java Dev Kit can't be found, just press Back and then Next again. Wierd, but that seems to do the trick ... go figure.
(Warning: Never put any zip files in your Platform Tools folder. Flashing zip files through fastboot will cause very serious problems. Zip files must be flashed from the external micro SD card through CWM recovery on the Xoom...we'll get to that later.)
2.3 Test that ADB and FASTBOOT works. You should open a command window by right clicking in your Platform Tools folder where all of your files are, plug in your Xoom to your computer with your Motorola cable (it may not work with a generic cable) and write 'adb devices'. Your Xoom should now be listed. Did your device not show up? Make sure that you have USB debugging enabled in Settings/Applications/Development on your Xoom.
Optional: Those that want to be able to access adb from any where on their computer, here's a tip from scsa20: "For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon ().
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%Sy stemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\ System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
It's long but do you see the android stuff there at the end?"
Update: xda poster Mandelbrot Benoit suggests an alternate adb setup, here: http://forum.xda-developers.com/showpost.php?p=18072572&postcount=50
If your windows computer doesn't see your Xoom, consider this (Originally Posted by AngryBulleteyeTruth):
When the xoom does not show up on PC it may be the problem of.... windows media player!
Xoom uses drivers of WMP to communicate with PC. If someone does not have the newest WMP drivers it will not show up and you can see xoom device in the devices tab on PC having an exclamation mark.
So the solution is to download and install Windows Media Player 11. It has worked for me.
--------
OK. Now that you are set up, it's Showtime! Take a deep breath...
3. Unlocking the device for flashing
This step will effectively erase the internal storage, including all your apps and settings. Use whatever backup you want to secure important data before you start. (It will also void your warranty, so you still have time to go back.)
3.1 Power up and start the Xoom.
3.2 Ensure that your device is fully recognized by the computer. A good sign is that the 'Portable device' dialog is activated on Windows when your Xoom has booted. The Xoom should also be seen in 'Computer'. If not, go back to step 2 and double check your USB drivers.
3.3 Use the command 'adb reboot bootloader' to go into Flash mode.
3.4 Use the command 'fastboot oem unlock'. This will trigger a dialog on your Xoom. Follow the instructions on the screen to complete the unlocking. I repeat, this *will* do a factory reset and all data will be lost!
3.5 Once unlocked, the Xoom will restart and work as normal. Don't bother to do any setup at this time, just make sure that USB debbuging is checked in settings, and now go on to step 4
4. Install recovery image (CWM) UPDATED 4/19/12
If you haven't done it already, download the recovery image file and save it to your computer in the Platform Tools folder.
(Download the recovery image from this link: http://forum.xda-developers.com/showthread.php?t=1604014 only the img file flashed through fastboot Remember, never try to flash a zip file through fastboot!)
Important: At this time, make sure you have a good (known to be working) microsd card in your sdcard slot in your Xoom. Reboot the Xoom with the sdcard in the slot to make sure it's mounted.
4.1 Boot into flash mode with 'adb reboot bootloader.'
4.2 Install your downloaded recovery image: 'fastboot flash recovery eos-recovery-r6.img' or whatever is the exact name of the recovery img file you are flashing.
4.3 Enter CWM recovery with the procedure below.
4.4 Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo section 4.
4.5 Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work (if you see Starting Fastboot Protocol), experiment with the timing (see below).
4.6 When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for getting this far!
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. Just repeat steps 4.1 through 4.6 if that happens.
UPDATE(12/28/11) Since putting this guide together, Motorola has issued a number of Over-the-Air (OTA) updates that have complicated the process of flashing the Clockawork Mod recovery, so if you have accepted any OTA updates, please read the following, which describes each step (http://forum.xda-developers.com/showthread.php?p=26009191#post26008083) (Thanks to Landorin.)
(If you have root and want to remove these files, remove or rename /system/etc/install-recovery.sh with something like root explorer. You can then flash your custom recovery through fastboot again.)
For those of you that get stuck with some error like 'device not recognized' poster Madjinj gives the following advice:
1) Be sure that you have your adb folder in the root of C drive directly and be sure that you are in adb folder in command prompt program (CMD in Windows machines) i.e by typing "cd c:\XXX" where XXX is the name of adb folder in your machine.
2) Be sure that you type "adb reboot bootloader" in comand prompt to activate adb program. if the problem persists, try typing "fastboot reboot" then after reboot type "adb reboot bootloader" in command prompt program.
3) Use the USB cable that came with your Xoom (some cables are not good in flashing for unknown reason..!!
4) make sure that you activate USB debugging mode.
5.0. Rooting the Xoom
The Universal Xoom Root zip file from solarnz is located here: http://forum.xda-developers.com/showthread.php?t=1242241
5.1 You need to transfer the Universal Xoom Root zip file to a working external micro SD card. You can do this on a computer or cell phone, but the Universal Xoom Root zip file must be located in the root directory of the micro SD card.
5.2 Insert the now prepared SD card in the Xoom.
5.3 Boot into recovery (as described in 4.3). Navigate using the volume buttons and press the power button to select the active option.
5.4 Select 'Install ZIP from sd card.'
5.5 Select 'Choose ZIP.'
5.6 Navigate to the ROOT zip file with the Volume buttons and select it with the Power button. Confirm that you want to install it.
5.7 Everything should indicate success, so back out to the main CWM menu and reboot the device.
5.8 From Android Market, install any app requiring root and start it. If the rooting was successful, then the app should request superuser permission and you should be able to grant it without any problems.
6. Flashing a new rom or kernel...(e.g. Tiamat Moray Rom and/or Odachi Kernel). Look in the Xoom Heaven thread or in the Development section of this form for all of these files.
6.1 This step is identical to 5, but swap out the ROOT zip for the ROM or KERNEL zip. For simplicity, you may want to prepare the micro SD card with both zip files at the same time in step 5.1..."
------------------------
This is still one of the best explanations of how to use adb and fastboot to unlock and root the Xoom and install a custom recovery, etc, and doesn't deserve to buries on back pages of this forum. Hopefully, the step-by-step nature of this guide will help those of you that have limited experience with this kind of tinkering.
Oh, and please feel free to correct any errors or omissions. As I said, it came from several sources and needed to somewhat updated.
Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium
fastyan said:
Thank you, just bought my xoom yesterday and was confused on the steps to take!
This has made it as clear as possible for me and will follow your instructions to the letter tonight.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
Good luck! Let us know how you make out and if anything needs to be clarified.
think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples
fastyan said:
think im doing something wrong as unlocked fine but when i go to install the recovery file it keeps coming up cannot load? any ideas where im going wrong?
been at it 3 hours now lol and losing the will to live im sure its gona be something simples
Click to expand...
Click to collapse
Check to make sure that your file download is good, and that you are typing it's name correctly. Better yet, you could rename the file "recovery.img" and that will make it very easy to get it right.
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium
fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium
Click to expand...
Click to collapse
When you're in the bootloader, you won't be able to access the SD Card or anything of that sort and adb won't work, in stead, when you're in the bootloader, you're switching over to fastboot. I'm sure if you type in fastboot devices you'll see your xoom listed.
Thank you for the reply and that's one thing sorted but any idea why its telling me "cannot load recovery"? I have tried renaming it and downloaded the recovery file 4 times incase that was wrong but still no joy :-(
I have done this all before on my phone and never had a problem so I must be missing something but f$*@ed if I know what?
Thanks again for your help though.
Sent from my Desire HD using xda premium
Just had a thought. Could it be that the XOOM hasn't actually unlocked, would that cause it to not load? Is there any way to check if its unlocked successfully? Although I did try it twice before?
Sent from my MZ604 using xda premium
Once you got it in the bootloader, you gotta make sure you do fastboot oem unlock, press volume down then up, press volume down again then up again, and let it format and reboot.
If it's already unlocked, you'd get a message telling you so (generally).
Then when you go to flash the recovery, make sure that the recovery image is in the folder where fastboot is and type in fastboot flash recovery recovery.img (if I remember the syntax that is, I'm at work and don't feel like scrolling up or going into the root guide to confirm xD ).
fastyan said:
On the sd card?I thought we had to put it into sdk platform tools? I have put it and renamed it onto my sd card but what is the command to flash recovery from sd card?
Also noticed once I have done "adb reboot bootloader" my computer doesn't see the XOOM properly, is in can't see it in my computer but does make a noise when I connect and disconnect is this correct? Debugging is on.
Sent from my MZ604 using xda premium[/QUOTE
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse
okantomi said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote.Oof course the cwm recovery img.. goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
Click to expand...
Click to collapse
With the way I have my system setup, I can run adb and fastboot wherever I am
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.
scsa20 said:
With the way I have my system setup, I can run adb and fastboot wherever I am
Click to expand...
Click to collapse
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.
fastyan said:
No, sorry, I was trying to respond. when I was tired and distracted.I totally miswrote. Of course the cwm recovery img goes in the platform tools...thank goodness you guys are out there to catch mistakes!
So, I don't know if you had any progress, but not successfully unlocking would surely stop you in your tracks.
No progress yet as im at work but when I get home I will start the process from scratch again and see how I get on and will keep you posted.
Click to expand...
Click to collapse
If, as you follow this guide, you find any explanations that are not clear or if you think of a step to take or something else that might improve the guide, please post it and we can add it in. It's been almost 6 months since I've unlocked and at least a couple of months since I've had to use adb, so I'm sure I've forgotten some things. Those of you whose experience is fresh can give really good advice. That's how this guide was originally written, by pingvinen, right after he had gone through a grueling rooting process.
okantomi said:
Care to share???
That would be helpful to many, I'm sure. We could add it to the guide, along with anything else you can think of.
Click to expand...
Click to collapse
For windows, if you go into System Properties and choose Advanced, then Environment Variables..., you'll be able to edit the Path variable under System variables, just add the path to where adb and fastboot is located (separated with a semi-colon (;)).
Here's what my Path variable looks like:
C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\android-sdk-windows\tools;C:\android-sdk-windows\platform-tools;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\
Click to expand...
Click to collapse
It's long but hey, see where the android stuff is near the end?
@Okantomi:
We all have learned some things from trial & error (eg.the sk cannot detect java dev kit)
i could only flash recovery after renaming it to recovery(do not forget to add.img in cmd while flashing).also the official motorola name recovery as same.
after downloading sdk and updating to platform tools i have kept a zip in safe location so that i do not need to download again platform tools if i install sdk fresh
initially knowledge was scattered now it is at one place.
right now testing steady hawkin's kernel and new recovery
btw good signature pic.
Ok so another night has gone and still can't get recovery on!! Tried re unlocking the XOOM and every time it comes up with "cannot load recovery.img" I tried installing everything on my laptop and went right from the start and getting exactly the same thing!
Starting to think im never gonna get this sorted now :-( just feels like the XOOM isn't unlocking? Every time I go through the unlocking process it never states that its already unlocked? Is there any way I can check that it is unlocked?
Please help im losing the will to live now lol
Sent from my MZ604 using xda premium
I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?
scsa20 said:
I would say to send it to me and I can take a wack at it but I don't think you want to wait that long to simply root it.
Let me ask you, are you getting any sort of error messages when you do fastboot flash recovery recovery.img? If so, what's that error message?
Click to expand...
Click to collapse
Not getting any error message it just says "cannot load recovery.img"
I have tried with and without the .img and always the same?
Tried going through the whole process again on my laptop incase I had missed something but exactly the same.
When I unlock it I follow the onscreen instructions and at the end it says its complete before it reboots. Then I turn on usb debugging again and reboot bootloader all ok but won't let me load the new recovery?
Normally I would just say it wasn't meant to be and leave as it is but I wont be beaten on this so I'm purposely not installing anything on it till its done. Any ideas apart from bringing it round yours lol ;-)
Sent from my Desire HD using xda premium
I did exactly what was written in the Development Section and more but unfortunately i couldn't manage to root it
First of all do i have to say i am no expert in these matters. Well i am not.
Somethings are missing in the guide for people who are not familiar with these things. For example it doesn't mention about how to create platform-tools folder in android-sdk-windows. I thought maybe i could do it from software and updated&installed bunch of things. Than voila i got the platform-tools folder.
In the "Setting up adb on the nook touch:" section we were told that write noogie to sd boot it and eject it away. And are we done with the sd card in the next sections ? Anyway i assumed as i don't need the card anymore and put it away.
When i came to "Setting up root acces on NST through adb and installing busybox:"
do the steps and entered the commands to Command Prompt(CMD). Everything seems fine but Nook didn't boot. I think maybe i can go to next step and enter those commands. I did it but it didn't boot either. So i manually booted the device and entered first line of commands again right after that finally Nook booted!
So i thought i only did the first command line set in the "Settin up root access on NST thorugh...." section so that i entered the second command set again but it didn't booted. And than i have proceeded to the next steps for the chance that if it went fine but directions made me thought it didn't. But when i came to Launcher and gapss part , it didn't boot so i figured that somethings was not right.
I don't know wtf is wrong but i thought maybe i should format and plug the sd card or just plug with noogie right after i thought we were done with sd card. So i did all those steps with the sd card formated and with noogie sd... It was all same.
Sorry for my unpleasant english. Please help me. For the "please help me lord" line i am sharing this song with you youtu.be/kLCCEipgmJQ
xisini said:
In the "Setting up adb on the nook touch:" section we were told that write noogie to sd boot it and eject it away. And are we done with the sd card in the next sections ? Anyway i assumed as i don't need the card anymore and put it away.
When i came to "Setting up root acces on NST through adb and installing busybox:"
do the steps and entered the commands to Command Prompt(CMD). Everything seems fine but Nook didn't boot. I think maybe i can go to next step and enter those commands. I did it but it didn't boot either. So i manually booted the device and entered first line of commands again right after that finally Nook booted!
So i thought i only did the first command line set in the "Settin up root access on NST thorugh...." section so that i entered the second command set again but it didn't booted. And than i have proceeded to the next steps for the chance that if it went fine but directions made me thought it didn't. But when i came to Launcher and gapss part , it didn't boot so i figured that somethings was not right.
Click to expand...
Click to collapse
Download noogie, and burn it into an sd-card (http://www.multiupload.com/OFI609MP8V) use Win32DiskImage.exe.
Shut down the Nook Touch completely your NST http://www.multiupload.com/CJ981FWPJG
Insert the sdcard into your Nook, connect it to the pc and turn it on.
When the nook ends booting (you should see a rooted forever spash screen on it) wait 20 seconds, you should see a new drive named boot, if not, go to MiniTool Partition Wizard Home Edition look for a parition named boot and asign it a letter.
Open boot, and replace the uramdisk, with this one http://www.multiupload.com/CJ981FWPJG.
Eject the nook from the pc and reboot without the noogie sdcard.
Download java JKD http://www.oracle.com/technetwork/ja...ads/index.html
Download the android sdk (I recommend zipped) and extract it on C so that it looks like C:/android-sdk-windows
I will add an step next, that is open the sdk, and update it.
And for the second comand line...... its adb connect yourNSTip where yourNSTip means... your Nook Single Touch IP address, so find that out and right it instead.
Read carefully, if you dont know what you are doing, you are better off using the touchnooter method, wich is simple and just works as intended and you wont mess things up so easily.
I don't know why you enlarged reboot part which i did correctly. And there is nothing wrong about ip adress part. If you would read carefully! I wrote that it is just didn't reboot automaticly as it is in the command line.
Btw if i would know what am i doing i would not need a guide so did you open that topic for just to proove that you did this. What kind of behavior is this ? Reread what i wrote or just don't try to help me with your blindfold and arrogance. I suppose there will be polite person in XDA who can help me out.
I posted the topic to help someone in particular and of course anyone who wants to use it, and myself to remember.
I couldnt understand halve of what you wrote, and I know you appologised for it so I didn't mention it.
As it says, this is a first draft, there may be typos, next time just say where you got stuck clearly, it'll be easier............
Now, I know you got stuck on the reboot at rooting, you shouldn't but I'll change the code a bit.
I also didnt intend to be rude, maybe you read me wrong, maybe you are the one being arrogant here as you got mad because I enlarged reboot, allthough I was trying to help you even if I was wrong.
If you have 0 adb experience I recomend you try touchnooter, its easier and faster, if you intend to learn adb, my guide is self explainatory, and just copying one by one the commands on cmd is enough, learn to follow instructions.
Don't worry I wont help you again
This becoming a pissing contest and i don't want to talk about it anymore.
So here is the thing. I have tried this method
mobileread.com/forums/showthread.php?t=156539 "i couldn't make it a link because i had few posts"
And it worked out well until pushing Vending.apk
Here are the things i did to make it work
1- Opened up and turn on Adb wireless widget
2- Located the Vending.apk to c:/android-sdk-windows/platform-tools/system/app
3- And then wrote these commands
cd C:/android-sdk-windows/platform-tools
adb connect 192.168.2.20:5555
mount -o remount,rw /dev/block/mmcblk0p5 /system
adb push vending.apk /system/app
C:\android-sdk-windows\platform-tool>adb push Vending.apk /system/app
182 kb/sn (2123059bytes in 11.380s)
Click to expand...
Click to collapse
It seems okay but when i try to search from market i see that it is not.
I am getting the e-signature verification error when trying to re-install package from stock recovery. I need clockwork recovery so i can install ROM's. I have a HW issue with my USB which prevents me from connecting to my PC. I have installed wireless ADB so i can flash a modified 3e version of the recovery manager to bypass the e-signature verification. I have a file attached with the modified 3e recovery. The install.bat file is set up for a usb connection with debugging enabled. Is there any way i can modify this batch file so i can use wireless ADB.
Sorry i did not post under development, i am under 10 posts. Every question i have ever had has been already posted until now
Thanks in advance
Having trouble with the USB on your phone? Getting the "This device has malfuctioned" error in Windows? My phone does that too, but I found that when I connect through a USB hub instead of directly to the computer, I can get my phone to work properly about one time in ten. You might also want to daisy chain hubs to get the phone further away from the computer, electronically speaking. It's worth a shot.
I just found this out the other day, and the first thing I did was to flash the modified 3e recovery, then replace it with ClockworkMod However, if I read the thread correctly, you can do it without using USB. If you open up the 3e_recovery_installer zip, you can see that there's really only one important file in there, and that's called "recovery". All the other files are just helpers. The install.bat (which you can edit in notepad) to coordinate the programs, TempRoot.exe to gain root access, adb.exe to install the "recovery" file, and two helper dll files for adb. That's it.
If I read post 9 from the original thread correctly, you can adb into your phone, get root access, then remount your /system partition as read/write with the command "mount -o rw,remount /dev/block/stl9 /system". Once you've done that, you can copy the "recovery" file from the 3e_recovery_installer zip to /system/bin. If you read through the install.bat file, you can see that's mostly all it does, anyway.
The author of post 9 mentions copying keys to /efs, but I can't find anything in the zip file or in the install.bat file about keys, so I'd probably ignore it.
Okay, so I've maybe pointed you in the right direction, now I'll give you some warning. Read everything you can. Read the original post in it's entirety, even though it's boring. Research until you know that you understand everything in that thread. Read through the install.bat file, and research until you're sure you understand everything in the batch file. Your phone's USB doesn't work correctly. You may not be able to flash back to stock. If you screw this up, mistype a command, or miss a step, you might screw up your phone to the point where you can't recover from it without a JTAG flash. Be very, very careful. Understand everything that you do, every command you type, and why you're typing it. Good luck.
The recently posted rooting method for the KFHD has been great for owners to get started on modifying the device to suit their own tastes. However, I've been a little concerned about everybody jumping in without a safety net in place. There are numerous ways that this device can get bricked. Not to put all of you into a panic, but just getting an eventual OTA update from Amazon might put some of these rooted KFHDs in jeopardy. With no custom recovery on the horizon, I think it's important to have some backup/restore plan to get these devices booting again.
Overview
This backup plan involves making raw data clones of all critical storage partitions required to boot the device. These backup archives can then be stored somewhere off the device. In case of some critical failure that prevents the device from booting normally, these archives can be used to get the device booting normally again. The restore procedure requires the use of fastboot to write the backup archives back to their proper partitions. The use of fastboot requires a working bootloader, so the device will need to boot to the bootloader's bootlogo at a minimum. If the device has a broken bootloader, this guide will not be helpful. There's currently no working procedure for repairing a broken bootloader on the 2nd generation Kindle Fire devices.
To be clear, this guide is not a backup/restore plan for your data. This is strictly for backing up the system software while in a bootable state and recovering it if some modification bricks the device. This procedure has been tested on a KFHD with system software version 7.1.1. Although I have not tested it, I'm nearly certain it will work just fine on version 7.1.5. If the KF2 has the same partition layout as the KFHD, there's no reason why it shouldn't work for that device as well. Check the post on KFHD partitions for details.
Warning: Everything below is inherently dangerous and can potentially brick your device if they are not executed properly. I have tested various aspects to the best of my ability, but you assume all responsibility for performing any of these steps.
Backup
Attached is a small shell script written to do the following…
Make a "kindlebackups" directory in /sdcard (if necessary) and make it user read/writeable.
Create gzipped backup archives of partitions 1 through 11. This includes all partitions except /cache and /data.
Make all archive files user read/writeable.
The entire backup (stock) takes up approximately 550 MB, so be sure to have at least that much available in /sdcard. Root privileges are required for the script to run properly. The best time to use this script is after step two of the published rooting procedure. That's after the second reboot of the process when the device boots up in emulation mode and allows root access for the first time. At this point, the system partition is completely stock and has not been exposed to any modifications. Even if you are past this point, the backups will still be useful for any bootable state that allows root privileges.
Download the script, unzip and place it into your current working directory where you still have access to adb, then run the following adb commands to copy the script to the Kindle Fire and prepare it to be executed...
Code:
adb push backup.sh /data/local/backup.sh
adb shell chmod 777 /data/local/backup.sh
If the device is in the process of being rooted and it has just finished rebooting for the second time...
Code:
adb shell /data/local/backup.sh
If the device has already been rooted and the su binary is available on the system...
Code:
adb shell su -c "/data/local/backup.sh"
The entire process should take approximately 5 minutes. Once the script has completed the backup, access the Kindle Fire's storage area from your computer, then copy the contents of the "kindlebackups" folder to it. The "kindlebackups" folder may be deleted after transferring to your computer.
Restore
To begin the restore procedure, the device must be put into fastboot mode. My factory cable did the job for me, so I have not explored the possibility of changing bootmodes. I developed this guide on a borrowed KFHD and I do not intend to risk the device more than necessary. Unless someone comes forward with a procedure to change bootmodes into and out of fastboot mode, I'm going to say that a factory cable is required for the time being. Besides, based on my experience with the original Kindle Fire, a broken system almost always means there is no way to change the bootmode through it. Since this procedure will very likely be used on a device that cannot boot completely or otherwise has a bad system, a factory cable will probably be the only way into fastboot mode. If you plan to root or modify your system software, invest in a factory cable.
Use the factory cable (with the device turned off, plug into the device, then the computer) to get to fastboot mode. If successful, a "fastboot" logo will take the place of the original "kindle fire" logo.
Decompress the gzipped archive to be flashed… Linux users have gunzip, Mac OS X users also have gunzip and a built-in GUI utility, and Windows users can use 7-zip. The archive must be decompressed before flashing. Skipping this step will brick your device.
Flash the image file(s) back to the device. In most cases, the device will just have to get a working system partition flashed back to it, but the others are available if they are needed. To flash the system partition...
Code:
fastboot -i 0x1949 flash system system.img
- Optionally erase the cache and/or userdata partitions if the contents of either interfere with the operation of the system software. The system will rebuild them on reboot…
Code:
fastboot -i 0x1949 erase cache
fastboot -i 0x1949 erase userdata
Once the process is complete, long-press the power button (~20 seconds) until it powers down, unplug the factory cable, and power the device back up.
Good luck.
Thanks kinfauns. I appreciate everything you did for the original kindle fire. This should help a lot of people.
Sent from my Kindle Fire
My kindles /system directory is already screwed. Do you have a system.img file I can use?
Sent from my Galaxy Nexus using xda app-developers app
When i boot my kindle fire hd to fastboot (by factory cable) and connect it to pc, pc can't recognize kindle, it don't have driver for it.
Could anybody post his clean backup here? Screwed my kindle, want go back to stock. Backup is only way.
Copying kindlebackup folder
Thanks for the script - the backup procedure was smooth -
I couldnt find the kindlebackups folder while browsing through my PC and for others like me who wonder how to take these out of your KFHD, here is a simple way - I used a program called Wondershare MObilego (Manage SDcard option under more tools) Backing up was a cakewalk.
I have no affiliation to this tool maker - Just sharing a way that helped a n00b like me. (First rooting experience)
Thanks for the efforts!
BTW, will a backup from a clean device work for other devices instead of the same one which the backup was created from? Just wondering if people who have already fiddled around their root devices can get a fresh start.
vuhai6 said:
When i boot my kindle fire hd to fastboot (by factory cable) and connect it to pc, pc can't recognize kindle, it don't have driver for it.
Click to expand...
Click to collapse
I don't know if anybody has packaged the device drivers set up for this device. If nothing else, you can get the device driver installer in the "Kindle Fire Utility" for the original KF and use that. You just have to change the PID from 0006 to 0007 before installing it and should work. Refer to this post if you still have problems...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
for device driver information. Again, written for the original KF, but the process for installing device drivers is the same. Only the PID is slightly different and that should get edited in the INF before installation.
ceebu said:
Thanks for the script - the backup procedure was smooth -
I couldnt find the kindlebackups folder while browsing through my PC and for others like me who wonder how to take these out of your KFHD, here is a simple way - I used a program called Wondershare MObilego (Manage SDcard option under more tools) Backing up was a cakewalk.
I have no affiliation to this tool maker - Just sharing a way that helped a n00b like me. (First rooting experience)
Click to expand...
Click to collapse
Glad to hear it worked out for you. I am not familiar with that program, but the KFHD should connect automatically to a Windows device as external storage... does it not?
dreamcryer said:
Thanks for the efforts!
BTW, will a backup from a clean device work for other devices instead of the same one which the backup was created from? Just wondering if people who have already fiddled around their root devices can get a fresh start.
Click to expand...
Click to collapse
I have not tested this and don't have a way to do so. I have some concerns about it, but I'm sure someone desperate enough will jump in and try it out. I know it's too late for some, but my suggestion is for everybody to make a backup if you can and not rely on someone else to give you archives after the fact. It's better to have your own backups.
Not recognized
My kindle is also not recognized when plugged in
kinfauns said:
I don't know if anybody has packaged the device drivers set up for this device. If nothing else, you can get the device driver installer in the "Kindle Fire Utility" for the original KF and use that. You just have to change the PID from 0006 to 0007 before installing it and should work. Refer to this post if you still have problems...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Click to expand...
Click to collapse
But pc don't recognize as Kindle, it as Tate-PVT-08 (sorry, i use mac cho screenshot, but windows too)
vuhai6 said:
But pc don't recognize as Kindle, it as Tate-PVT-08 (sorry, i use mac cho screenshot, but windows too)
Click to expand...
Click to collapse
I know that the vendor id is correct.
Sent from my Kindle Fire
kinfauns said:
Glad to hear it worked out for you. I am not familiar with that program, but the KFHD should connect automatically to a Windows device as external storage... does it not?
Click to expand...
Click to collapse
I was only able to see the contents of /sdcard using windows...
Sent from my GT-I9100 using xda app-developers app
cesdev89 said:
My kindle is also not recognized when plugged in
Click to expand...
Click to collapse
Then you're first going to have problems getting root privileges. You need to get adb working before you attempt any part of rooting or backing up with this procedure.
vuhai6 said:
But pc don't recognize as Kindle, it as Tate-PVT-08 (sorry, i use mac cho screenshot, but windows too)
Click to expand...
Click to collapse
This is the correct "product" reported by the KFHD. This and the product ID (0007) are the only differences between the KFHD and the original when it comes to installing the device drivers on Windows.
ceebu said:
I was only able to see the contents of /sdcard using windows...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
/data/media and /sdcard are essentially the same thing (see the second post in this thread for an explanation of why this is the case). You should have seen kindlebackups in that directory.
kinfauns said:
You should have seen kindlebackups in that directory.
Click to expand...
Click to collapse
For some reason I didn't see it there, on hindsight I guess I panicked a bit (n00b) and fell back to the solution I already had.. (been using mobilego to manage my sgs2)..
Sent from my GT-I9100 using xda premium
kinfauns said:
I don't know if anybody has packaged the device drivers set up for this device. If nothing else, you can get the device driver installer in the "Kindle Fire Utility" for the original KF and use that. You just have to change the PID from 0006 to 0007 before installing it and should work. Refer to this post if you still have problems...
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
for device driver information. Again, written for the original KF, but the process for installing device drivers is the same. Only the PID is slightly different and that should get edited in the INF before installation.
Glad to hear it worked out for you. I am not familiar with that program, but the KFHD should connect automatically to a Windows device as external storage... does it not?
I have not tested this and don't have a way to do so. I have some concerns about it, but I'm sure someone desperate enough will jump in and try it out. I know it's too late for some, but my suggestion is for everybody to make a backup if you can and not rely on someone else to give you archives after the fact. It's better to have your own backups.
Click to expand...
Click to collapse
I'm ready to try
Didn't show at first
Kindlebackups showed up in root browser right away, but didn't show on PC until I rebooted KF2. So now should
I decompress and put in folder containing ADB?
Yuretz said:
Could anybody post his clean backup here? Screwed my kindle, want go back to stock. Backup is only way.
Click to expand...
Click to collapse
I got the same situation, could anyone kindly help to provide a backup?
Same here ... just need the system image ... Please
I'd appreciate it if everybody would refrain from making this a "beg for a system image" thread.
strat6 said:
Kindlebackups showed up in root browser right away, but didn't show on PC until I rebooted KF2. So now should
I decompress and put in folder containing ADB?
Click to expand...
Click to collapse
You can put the the images wherever you want, but you'll need to specify the path to the file. For example, if you are using Windows and put the kindlebackups directory on C:, you just need to modify the command to...
Code:
fastboot -i 0x1949 flash system C:\kindlebackups\system.img
Thank you for posting how to do this. It opens a lot of doors with at least a little security.
I made a backup earlier without a problem, then went ahead and made myself a factory cable(easy to do and worked great- old asus usb cable, 1k resistor, soldering iron, shrink tape and voila!). I feel much better about doing any mods to this device now knowing I can just flash my backup.
my nexus 4 was rooted with 4.3 but then i decide to upgrade to 4.4
this is the video i am trying to follow, basically just wipe & install which i did most the time.
youtube title "NEXUS 4: HOW TO MANUALLY UPDATE TO ANDROID 4.4 KITKAT"
it has two files one is mako and one is gapp.
after i did all the wiping in cwm and try to install the mako file, it shows "no file context" or sth similar, and installation is abort (i think there is problem when i transfer the file), but then i continue to install the gapp file (what the hell was i thinking?)
so now i am stuck in the google start up loop, i can only access cwm recovery mode and don't have a valid rom to install in my sdcard.
i tried to adb push another rom to the sdcard with no success (my storage was already very low, any way to remove files in the storage at this point?)
the "mount & storage" also doesn't seem to let me mount the sdcard (but system shows up "unmount").
so now i don't know what to do.
if anything has any idea or suggestion please let us know.
i am quite desperate now with a dead phone and will try anything.
thanks for reading such a long thread.
Dude that vid is old and it installs pa or some other port just flash factory images from google
Sent from my F1 using xda app-developers app
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Frickelpit said:
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Click to expand...
Click to collapse
any step by step guide to do this?
i am still new to this thing even i install a few roms before.
i will google it now, but any additional info is much appreciate.
thanks
Frickelpit said:
try to sideload a zip with ADB in recovery. no need to copy to your internal storage.
also try to connect with adb shell, then you can delete some files manual with rm.
Click to expand...
Click to collapse
frustrated..
i can't seem to get my windows to recogize the device (when i type adb devices, it shows an empty list)
already try trouble shooting this for a long time with no result.
any idea?
telly0050 said:
frustrated..
i can't seem to get my windows to recogize the device (when i type adb devices, it shows an empty list)
already try trouble shooting this for a long time with no result.
any idea?
Click to expand...
Click to collapse
after tons of troubleshooting finally got it back to work.
it ends up the reason is i didn't update to the latest cwm at the very beginning.
and sideloading 4.4 didn't work because of that too, i have to install an old 4.2 to have it working.