[HOWTO] Install the new market 3.4.4 in your rom beta ICS - Galaxy S I9000 General

How we know we can find in xda the new market 3.4.4, and if you want put it in your rom ICS you need to do this if you can't install it as a normal apk:
The first thing you need to have Root Explorer
Download / Put the market in the SGS in the folder Download
Now we go in system/app and move the file Vending.apk in sdcard (root explorer must be in Mount R/O)
We come back in data/dalvik-cache and look for the file [email protected]@[email protected] and put it in sdcard, too
Now take the new market that you have in the folder Download (rename in Vending.apk) and move it in system/app
Press for a few seconds the file vending.apk
Select the option Permissions
Select / check the 3 boxes Read and the box write / Owner, the other boxes must be uncheck
Turn off your SGS
Now turn on your SGS and you have your new market working

Actually, u can just install like a normal apk... -.-
Anyway, thanks for ur kindness...
Sent from my GT-I9000 using Tapatalk

With the onecosmic's ICS you can't install it as a normal apk

Thanks, worked perfectly on a i9000 with Beta 2.5.5 based on onecosmic's.

Thanks for sharing~ that helpful.

Thank you!

Thanks but can install as a normal app on Gingerbread.

Related

Root Manager Deleted Market.apk!

Alright, so I have a rooted Vibrant on stock ROM. I used Root Manager to delete the bloatware on the phone. Worked great. However, when I used the delete data function, it took out all my apps including market.apk! So I can't get Rom Manager from Kousch to run a Naidroid restore, and I can't get the phone to sync up with Odin in download mode. Is there an update packet I can use to install the stock (with root) ROM with the install packages function in recovery mode? Maybe Eugene373's ROM? Thanks for any ideas.
I pulled the vending.apk out of Eugenes stock Vibrant rom. Copy and paste the .apk back to /system/app.
There's a Vibrant dump floating around the development section. Just get all the missing APK/ODEXs you want back out of it and copy them to /system/app.
Update: Turns out I got impatient and tried the Odin method to flash my ROM. That was a BIG mistake, put my phone into a brick cycle where I could not get phone into recovery or finish an Odin flash. I took it back to a local T-Mobile store and a friend hooked me up with a swap out. I have the new phone rooted and running ClockWork Mod. Will probably not try the Odin route again. Way too risky. Mods can close this thread or keep it up as a warning for novice android fans. Thanks for the dump and spare apk. This will be helpful in the future.
Great job
ultra spikey said:
I pulled the vending.apk out of Eugenes stock Vibrant rom. Copy and paste the .apk back to /system/app.
Click to expand...
Click to collapse
I found another vending.apk, but I guess they are different because I wasnt able to find some apps with that market on my SGS Vibrant. After I used his .apk, problem solved.
MAKE SURE YOU USE THE RIGHT VENDING.APK (MARKET).
How to find the system/app folder on vibrant, and how to paste? Please,, I'm a noob
ashvincj said:
How to find the system/app folder on vibrant, and how to paste? Please,, I'm a noob
Click to expand...
Click to collapse
You need super manager, root explorer or astro file manager ...along those lines to see the folders
Sent from my Bionix V powered Vibrant
Thanks but how do I copy the vending.apk to the system/app folder?
ashvincj said:
Thanks but how do I copy the vending.apk to the system/app folder?
Click to expand...
Click to collapse
use root explorer (paid)
or
Astro File Manager (free)
put the .apk in sd card first though
then copy it over.
@guy who said ODIN is way to risky..
BAHAHAHAHHAHAHAHAHAH
ya I downloaded the apk file but when I tried to paste it says thet is a error in parsing the file,, wat to do?
Market force close
i Have An Optimus T? And i Z4rooted No Custom Rom And My Market iS Gone iDownload a market 2.2.6 apk and installed it but it force closes!!!
-im still rooted
-cant boot into recovery
-dosnt update any of my apps
Theinsinity said:
i Have An Optimus T? And i Z4rooted No Custom Rom And My Market iS Gone iDownload a market 2.2.6 apk and installed it but it force closes!!!
-im still rooted
-cant boot into recovery
-dosnt update any of my apps
Click to expand...
Click to collapse
Cool .

Install your own apps via xRecovery - Collection of xRecovery files

Hi Guys!
Now that finally the devs arrived with some amazing ROMs, I change these ROMs a lot every day. But I experienced some problems because I often do that at work where I don't have adb shell available. So I created an xRecovery zip-file to install Android Terminal Emulator before booting into the ROM the first time.
That gave me the idea to offer you some zip-files with useful (free) applications you perhaps want to have pre-installed on any ROM before booting it.
I also attached two blank zip-files where you can easily add your own apps, perhaps a preferred keyboard in your language or whatever you want to push onto your phone via xRecovery.
If somebody's interested we could turn this into some kind of collection for universally usable xRecovery files.
How to use the blank zip-files:
To use this method, you need to have the app available as an apk-file, of course.
If you have the app already installed on the ROM you're looking to replace, you can just use a root file manager like Root Explorer to copy and paste the apk file from \data\app\ to your SD card.
If you cannot get the apk file, you can request it here or send me a PM and I'll try to prepare the zip-file for you. Don't ask me to do this with paid apps! This whole method is meant to be used with free apps and I will not add or support warez in any form!
Okay, now let's start. As you can see, I attached two blank zip-files: blank_data-app.zip and blank_system-app.zip. Why two of them?
There are basically two locations where you'll want to install your own apk's:
\data\app\ --> contains all non-system-relevant user apps and should be your choice in most cases. If you install here, you can easily uninstall the apps later if you don't need them anymore.
\system\app\ --> contains system-relevant and pre-installed apps such as vending.apk / phonebook.apk / Email.apk / Gmail.apk / Calender.apk / etc.
Only install here if you want to replace one of these apps with a themed one or if you want to force-update market for example! It's not possible to uninstall anything you installed here the usual way! You'll have to use Titanium Backup or another third-party app.
Only overwrite existing apps in this folder if you know what you're doing!
So, just choose where you want to install your app, open (NOT extract!) the corresponding file with a zip-file manager of your choice (I'd recommend 7Zip or WinRAR) and drag the apk-file you want to install into data\app\ (for blank_data-app.zip) or system\app\ (for blank_system-app.zip. pretty obvious, huh? ). Confirm to copy the file there and close the zip file.
That's it. Now you just have to give your zip-file an appropriate name and push it onto your SD card to install it via xRecovery-->install custom zip-->choose custom zip from sdcard.
__________________________________________________
Some comments on the zip-files attached:
- Android_Terminal_Emulator.zip:
This is useful if you installed a new ROM and experience problems like flashing homescreen or no GSM/data connection. In that case, open ATE and type the following:
su (confirm SuperUser rights)
busybox killall servicemanager
Click to expand...
Click to collapse
This will restart the phone and hopefully solve your problems. (I know this mini guide seems not to fit here, but perhaps someone reads it before spamming the dev thread with questions that were answered a thousand times )
- JIT_Enabler_v2-zdz.zip:
all KUDOS go to zdzihu. Make sure you visit his thread to always get the latest version of JIT Enabler.
Note that you only need this file on 2.1 ROMs where JIT Enabler isn't pre-enabled! On 2.2+ ROMs JIT is always included.
- New Market V2.2.11.zip:
Make sure to sign into your google account and open market once (accept licence agreement) before you update to the new market. Many people experience problems if they don't do this!
- TitaniumBackup-3.6.7.1.zip:
You can also create this file yourself. If you open TB and tap on Settings-->more... there's an option to create an update.zip
- XDA_app.zip:
Useful for any kind of problems of course
__________________________________________________
So, not much of a collection at the moment, but perhaps there's interest for something like that. If you know something that will come handy to have it preinstalled, just tell me!
Cheers
qwer23
very nice idea, but i was wondering if there is a guide to how to make .zip files for xrecovery
"instead of giving me a fish to eat for a day, teach me how to fish!"
Sent from my X10 using Tapatalk
mezo9090 said:
very nice idea, but i was wondering if there is a guide to how to make .zip files for xrecovery
"instead of giving me a fish to eat for a day, teach me how to fish!"
Sent from my X10 using Tapatalk
Click to expand...
Click to collapse
i like that point of view! well i only found one for creating a whole update. zip for a rom with android kitchen I can explain some of the basics inside this zip file this evening after work. a zip just for installing apps is created quite easily. it gets more complicated if you have to set permissions and things like that.
Sent from my rooted X10i using XDA App
good idea!
thanks
Great! thanks a lot for this useful guide, I will use it.
Just one question in the same line like mezo, If I already have a rom zip file and I want to add to this rom the apps, would it be possible? and Could you explain us? or its just copy the files inside the \data\app\ folder?
Thanks again for your help.
Great idea, thanks!
Sent from my Freex10 2.2.1 Darkstyle
770G said:
Great! thanks a lot for this useful guide, I will use it.
Just one question in the same line like mezo, If I already have a rom zip file and I want to add to this rom the apps, would it be possible? and Could you explain us? or its just copy the files inside the \data\app\ folder?
Thanks again for your help.
Click to expand...
Click to collapse
As long as the apps aren't system-relevan, it's as easy as that, yes
For all of you willing to learn more: I'm quite a noob, too, but I'll try to make a tutorial on how to create recovery zip-files as soon as I can.
Won't be today though, because I'll go out to party into my birthday this evening
So long,
qwer23
mezo9090 said:
very nice idea, but i was wondering if there is a guide to how to make .zip files for xrecovery
Click to expand...
Click to collapse
You can use the Android Kitchen to create custom zip files, I use the Cygwin method as it makes file management a little easier imo.
Great idea man, a lot of thanks!
1 zip - several apps
Is it possible to create one zip to install several apk's?
Maybe I have a few "stock" apps, the ones that I always need, and want to install all in a single step.
Can this be done or I have to install one by one even using xRecovery?
Thanks!
Great tuto and thank you for sharing
jpdediego said:
Is it possible to create one zip to install several apk's?
Maybe I have a few "stock" apps, the ones that I always need, and want to install all in a single step.
Can this be done or I have to install one by one even using xRecovery?
Thanks!
Great tuto and thank you for sharing
Click to expand...
Click to collapse
you can throw as many apps as you want into the zip file. everything inside the data\app folder will be installed
Sent from my rooted X10i using XDA App
Hello all. Ihave a problem with xRecovery 0.2 (the last release) when I reboot my phone holding the back button a few moments after the SE Logo appears, it doesn't work. I've installed it with the xRecovery installer and with the FlashTool with BusyBox 1.17 installed. I'm on a X10 2.1 Generic . Thaks
Gugoo said:
Hello all. Ihave a problem with xRecovery 0.2 (the last release) when I reboot my phone holding the back button a few moments after the SE Logo appears, it doesn't work. I've installed it with the xRecovery installer and with the FlashTool with BusyBox 1.17 installed. I'm on a X10 2.1 Generic . Thaks
Click to expand...
Click to collapse
Firstly, the xRecovery depends upon its version of busybox. In the version I use it is 1. 15. 3
So re-install xRecovery(just in case).
Secondly, u don't hv to keep the back key pressed but tap it a few times repeatedly during the screen with "Sony Ericsson" logo.
Hope this helps.
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
thanks for the info!
kloud_ said:
Secondly, u don't hv to keep the back key pressed but tap it a few times repeatedly during the screen with "Sony Ericsson" logo.
Hope this helps.
Regards
kLouD™
Click to expand...
Click to collapse
Thx but that doesn't working =(
it works ! thx
bro i need your help... im using froyo custom rom on my x10.. now i need to install backup & restore apps but it said apps cannot installed. so how to install it using xrecovery... i have the apk as well.. but i think the apk is for Eclair.
Sof_600 said:
bro i need your help... im using froyo custom rom on my x10.. now i need to install backup & restore apps but it said apps cannot installed. so how to install it using xrecovery... i have the apk as well.. but i think the apk is for Eclair.
Click to expand...
Click to collapse
sorry, backup and restore only works with stock se rom and mods based on it (like kx10 or blue sparks,...). it's impossible to install on any 2.2/2. 3 or 2.1 AOSP rom.
Sent from my rooted X10i using XDA App
in deed ..you only have to press twice.. (press one..wait one sec then press again and release...and wait for the terminal to popup) voilà!
--------
hey im having a problem.
I know that you will say "this belong to another thread" but since this way i can trick the thing and install again the system apps like the Package administrator etc, i need to know what to do in mi case with this method:
mi BETA3 was working smooth!
iv been using the BETA3 a long time but some days ago, suddently i couldn't install apps anymore (thouse that are in mi SD or frome the market...not even Applanet...nothing)
The screen shows the "barber shop black and white" bar rolling and rolling and never stop.
Mi USB detection is not working, that means that mi PC is recognazing the phone (it sound like a UYSB is been conected) but never apear the folder of the SD. nto even options of debugging usb etc in the notification bar of the device.
and when i get in Settings> runing aplications, all aplication are in "calculating..." mode. so they say 00 mb. and never stop triying to get the numbers. its so odd.
the other aplication (that came installed with the BETA) works fine.
I have tryed, erasing the firmwares and isntalling them from the beginning and everything worked fine with old firms like 2.0 and 2.1 update1. too!
then i do the root (first z4root, then busybox, then xRecovery) and make xrecovery work. install the beta 3, and again i can't do anything.
i triyed installing the BETA4 but never stop rebooting so i just yield and stick with BETA3.
any idea..plzzz!!! i really don't whon't to use Eclair...it's just so ugly!!
it's not working on mi xRecovery. i put the apps insinde app folder of thwe .zip and put it in a random folder of mi SD, then do >the Recovery > install custom.zip>Choose from SD card>confirm install the selected "blank_data-app.zip".
and it say:
Finding update package.....
opening update package.....
E i asume E means Error!) can't open blablabla/blblabla folder/blank_data-app.zip (bad)
installation Abnorted.
i asume iv done something wrong...!?!?
PS: BTW can somebody sen me the original .apk of FROYO bwecasue i can't find them , to use the system-apps.zip
thanxxx!!!

[Q] How to install default Gingerbread Launcher?

I installed a new Rom, but it came with ADWLauncher, and i really don't like it. I want to install the default gingerbread launcher. ADW drains my battery so fast, and it is slower than default. What should I do?
Its risky to explain. Because i dont know wich rom you use. But be warned, you can broke your nand install. Then you need install again your rom. Make backup before go to froward.
This is only for gingerbread version.
1. Download rootexplorer at market and install it.
Open root explorer and go to /system/app folder.
Look did you have Launcher2.apk (on gingrbread rom) there. If yes, then go forward to step 2.
If no, download attached file and extraxt it. Copy extracted file to sd somewhere. Then with rootexplorer copy this file to /system/app folder.
Go to step 2.
2. Delete the ADWLauncher.apk.
Dont try go back to home screen. Right there where you are (rootexplorer opened on /system/app) press power button and go to reboot.
Enjoy, if all was gone right!
Thank you! will try asap
I'm using TyphooN CyanogenMod 7 v2.3 ROM. As soon as I can I will try it. I'll post the results. Thank you so much.
Go to settings, applications, manage applications and find ADW launcher. Clear the defaults for the app and then press the home button. You should be offered the choice of launchers that are installed on your phone. Set whatever you want as default and just never use the other(s).
This obviously doesn't get rid of any applications, so you can switch between launchers as much as you like.
datas0ft said:
Its risky to explain. Because i dont know wich rom you use. But be warned, you can broke your nand install. Then you need install again your rom. Make backup before go to froward.
This is only for gingerbread version.
1. Download rootexplorer at market and install it.
Open root explorer and go to /system/app folder.
Look did you have Launcher2.apk (on gingrbread rom) there. If yes, then go forward to step 2.
If no, download attached file and extraxt it. Copy extracted file to sd somewhere. Then with rootexplorer copy this file to /system/app folder.
Go to step 2.
2. Delete the ADWLauncher.apk.
Dont try go back to home screen. Right there where you are (rootexplorer opened on /system/app) press power button and go to reboot.
Enjoy, if all was gone right!
Click to expand...
Click to collapse
It didn't worked. I got stucked on cyanogen mod screen!
I warned you before.
And still i dont know (other too if want help) wich rom you use.
datas0ft said:
I warned you before.
And still i dont know (other too if want help) wich rom you use.
Click to expand...
Click to collapse
I just reflashed it. Now it's ok, but i continue with ADWLauncher. It really piss me off.
I'm using TyphooN CyanogenMod 7 v2.2 [kernel=rafpigna v1.7 OC], with android 2.3.2.

Allshare

Hello i have the kyrollos 3.1 editon and cant install allshare.
Can somewone tell me how to install??
Thanks a lot
XxxTarkanxxx
Sent from my GT-I5800 using XDA Premium App
get the deodexed apps of ur original firmware
search for the allshare apk file
root ur phone
get root explorer or any other root enabled file explorer
copy the .apk file to system/app and reboot ur phone
Kyrillos v4 final:
I tried to install the dlna.apk with Easy Installer (message: not installed). Then I tried to move the apk with File Expert directly into the system/app folder where all other apk where. It did tell me that it is handling this copy but nothing appeared in this folder...
Tried it again with File Manager but he wouldn't let me Paste the file into the folder...
What next? Any ideas?
Thanks
did u enable R\W mode???
good question. I just realized that the folder is still on read-only.
I tried to use terminal emulator and type "chmod 755 ./system/" to change the rights but I got "unable to chmod system. read-only file system"...
So what did I miss?
use the built in switcher in root explorer or other file managers( e-strongs or astro) i know both have r\w toggle
or goto data\app and paste it there
u need to manually change permissions for each folder
So with root explorer I just go to the folder and change the rights into r/w?
If I understood correctly I need to change the rights first in system then in app, right?
Root Explorer rocks
I managed to change the rights (with "Mount R/W") andthis changed the rights also for the subfolders. Then I pasted the dlna.apk file into the app folder. Then I changed the rights back to r/o.
After reboot it took some time to get everything up again, and all my apps where again unsorted on the different screens.
The file is still in the folder but no allshare application in my programs....
So I copied the file into the data/app folder...
Reboot (didn't take a long time) still no app there...
What now?
Maybe someone knows another app from the market which can do the same thing, also for Samsung and other brands?
Thanks
did u get the deodexed apps from JPM rom or any other
& what do u allshare for???
I downloaded the dlna.apk from the internet and tried to install it with easy installer. I'm not sure whether it is from JPM How can I find out?
I want to use allshare with a Samsung TV.
Having flashed Kyrillos ROM.
Was that the question?
try imediashare or samsung remote
free from market
Download system app+framework file from kyrillos rom post n copy dlna file to system/app using root explorer!

Android Market v3.4.4

I want to post this thread to "[GUIDE] Install Full Android Market on Kindle Fire (Compilation Master Thread)"
Because I don't have enough post, so I can't post it in there.
This android market v3.4.4 solve 2 problem that I have before.
1. Market Force Close when I try to download apps.
2. Download problem: it stuck at 0% and never complete the download.
Hope this can help you guys that have the same problem like me.
Link: mediafire.com/?ub0xw044l9jxqsh
This is what I do to remove my old market:
1. I use es file explorer to open system/app folder.
2. Long press vending.apk to delete it
3. Done.
This is what I do to install my new market:
1. Rename AndroidMarket_v3.4.4.apk to vending.apk
2. Using es file explorer, move vending.apk to system/app folder
3. Change vending.apk permission to rw-r--r--
4. Click vending.apk to install it
5. Done.
Hope this helps
Thanks
I finally found up to date version of the android market =)
KFU
U should just download kindle fire utility and one of the options downloads Android market for you
pretty easy
http://www.youtube.com/watch?v=qis5I6Pp_jE&feature=channel_video_title
I don't have any problem with older version of android market, but having more recent version certainly helpful. using KFU is easy, but sometimes I wonder of each process and step involved (just in case I need to solve certain problem later)

Categories

Resources