CyanogenMod 7.2 cooper KANG RC1 Android 2.3.7 by J.A.F. a.k.a. AXEL2033
Very fast CYANOGENMOD!!!
My original post on 4pda
How to install:
You need a stock or custom rom with Android 2.3.*
You need CWM5 installed
Reboot into ClockWorkMod, wipe data/factory reset, format /system in CWM before flashing this rom.
If you upgrade from my previous build or build from Grif07, you can only wipe cashe!!!
Flash CyanogenMod 7.2-COOPER-KANG-AXEL-RC1 from recovery
Flash GAPPS from recovery.
Reboot your phone (first boot will take some time)
Changes from previous version:
New kernel by me (with SWAP)
Build fully Odex
Fixed problem with Video Camera rendering
Fixed problemma with SOD
Fixed mac-address
Removed Torch (you can use the Tiny Flashlight)
Fully working and BLUETOOTH and RADIO
Problems:
Proximity Sensor do not work.
Touch-sensitive buttons light up randomly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please DONATE ME
PayPal : KY32FMN633JNE
WebMoney :
WMZ : Z133095981000
WME : E310660703253
MY OLD VERSION
New Version)
that's good news man, thanks, if you say it's fast then I believe you and gonna try it tonight. So you say kernel is build by you and it's swap, can you explain?
1. Does your kernel supports overclocking?
2. And if for any reason somebody don't like it can we still flash oc kernel by ketut?
Honestly, I had this feeling that today was a day for a new rom!!!!
---------- Post added at 07:36 PM ---------- Previous post was at 07:29 PM ----------
Axel2033 said:
New Version)
Click to expand...
Click to collapse
in your post it still says RCO, correct it to RC1
Sorry but my kernel does not support overclocking fow now but I will make a new kernel every week)
Yes of course
Is it stable?
The most other cyanogenmod versions craches on heavy usage.
kevinkrs said:
Is it stable?
The most other cyanogenmod versions craches on heavy usage.
Click to expand...
Click to collapse
Mostly they crash on overclocking.Don't overclock.The present overclock kernels may damage your phone.
great work axeel2033 !!! what is your quadrant score?
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
Axel2033 said:
CyanogenMod 7.2 cooper KANG RC1 Android 2.3.7 by J.A.F. a.k.a. AXEL2033
Very fast CYANOGENMOD!!!
My original post on 4pda
How to install:
You need a stock or custom rom with Android 2.3.*
You need CWM5 installed
Reboot into ClockWorkMod, wipe data/factory reset, format /system in CWM before flashing this rom.
If you upgrade from my previous build or build from Grif07, you can only wipe cashe!!!
Flash CyanogenMod 7.2-COOPER-KANG-AXEL-RC1 from recovery
Flash GAPPS from recovery.
Reboot your phone (first boot will take some time)
Changes from previous version:
New kernel by me (with SWAP)
Build fully Odex
Fixed problem with Video Camera rendering
Fixed problemma with SOD
Fixed mac-address
Removed Torch (you can use the Tiny Flashlight)
Fully working and BLUETOOTH and RADIO
Please DONATE ME
PayPal : KY32FMN633JNE
WebMoney :
WMZ : Z133095981000
WME : E310660703253
MY OLD VERSION
Click to expand...
Click to collapse
what is the difference with your kernel??
slaid480 said:
great work axeel2033 !!! what is your quadrant score?
---------- Post added at 08:00 PM ---------- Previous post was at 07:57 PM ----------
what is the difference with your kernel??
Click to expand...
Click to collapse
Why is Quadrant so significant. There are so many variations in results that make it virtually irrelevant . It makes people feel good with a high score. That's about it. In my opinion a slightly more relevant test is Vellamo - free on Market. Gives a clearer idea of performance, but still not perfect by any means, especially as it's a QualComm test that likely favour their product.
Sent from a phone with an app.
Any great differences to the other versions (except camera, as it can be fixed by a fix ^^)?
sdotmouse said:
Why is Quadrant so significant. There are so many variations in results that make it virtually irrelevant . It makes people feel good with a high score. That's about it. In my opinion a slightly more relevant test is Vellamo - free on Market. Gives a clearer idea of performance, but still not perfect by any means, especially as it's a QualComm test that likely favour their product.
Sent from a phone with an app.
Click to expand...
Click to collapse
i have talk about quadrant because , it gives varient I/O ans 2D and 3D... that will help me to now what is the difference with AXEEL2033's new kernel dude
slaid480 said:
i have talk about quadrant because , it gives varient I/O ans 2D and 3D... that will help me to now what is the difference with AXEEL2033's new kernel dude
Click to expand...
Click to collapse
I think its his own creation dude. Cheers
Proximity Sensor do not work.
Touch-sensitive buttons light up randomly.
Lovetz said:
Proximity Sensor do not work.
Touch-sensitive buttons light up randomly.
Click to expand...
Click to collapse
well,how about kernel performance?
did an update from previous version, feels very fast, I'll try a clean install over 2.3.6 XXKPP to see how it goes.
doctorace92 said:
Mostly they crash on overclocking.Don't overclock.The present overclock kernels may damage your phone.
Click to expand...
Click to collapse
No I used a kernel without overclocking and crashes a lot too. But I running on this ROM more than 1 hour. Without crashes.
---------- Post added at 07:58 PM ---------- Previous post was at 07:49 PM ----------
Hi all,
I have test the rom with quadrant score.
This is the result.
Really feel awesome ... 7.2 was always fast ....but with all those bugs removed and new kernel ....feels the best..... good work Axel
EDIT : and min cpu frequency was 245 MHz by default right ?? and it doesnt have smartass as governor ... ???
Might give this a try in a couple of days even though I have experienced no problems with the other 7.2 build that Lovetz posted.
Sent from my GT-S5830 using XDA App
No BLN control? Buuu... :/, i hope you will fix it.
EDIT
And the Torch don't works, I know the isn't an torch app, but I have allows use a button in Widgetsoid on my home screen and now it not works, only Tiny Flashlight works but I don't like it.
dragonnn said:
No BLN control? Buuu... :/, i hope you will fix it.
EDIT
And the Torch don't works, I know the isn't an torch app, but I have allows use a button in Widgetsoid on my home screen and now it not works, only Tiny Flashlight works but I don't like it.
Click to expand...
Click to collapse
isn't bln needed only for devices that have led indicators? am I wrong? and ACE doesn't have a led blinking to notify you of missed calls/sms
---------- Post added at 10:30 PM ---------- Previous post was at 10:29 PM ----------
prateek_gemini said:
EDIT : and min cpu frequency was 245 MHz by default right ?? and it doesnt have smartass as governor ... ???
Click to expand...
Click to collapse
I think that's correct
itasoulas you are wrong, BLN is used to replace the led notafictions on the devices which don't have led witch the backlight off the touch buttons.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is reserve for nightly build of Cyanogen Mod Rom for Hp Touchpad
You can report and discuss all issue you are having with nightly build here.
What are Nightly build ? : auto compil build from the CyanogenMod github, each time there are new corrections on it.
This version change each night, and aren't support officialy, if you find bugs/issues you can/must discuss here.
Warning: Not for new user, flash this build only if you know what you are doing !!!
There are no Google Apps bundled with CM ROMs, because Google asked Cyanogen to remove copyrighted apps from his roms,
after flashing rom don't forget to flash Google Addon package if you want it.
Lastest version: CM9...
Download: http://goo.gl/aFjfO
MD5Sum: check the md5 under the files named associate with your build version before flashing it
Google Addon:
http://goo.gl/Mc4wb >Check the lastest package available on top
MD5Sum: check the md5 of the files before flashing it
USEFUL
http://wiki.cyanogenmod.com/wiki/Barebones clean your rom to make space
http://goo.gl/jPvnw Camera progress ; Test ROM CM9+working camera : http://goo.gl/JJS3Z
ACME Installer 3
CHANGELOG What's new in this version :
http://cm9log.appspot.com/?device=tenderloin
http://changelog.bbqdroid.org/#tenderloin/cm9/next
http://cm-nightlies.appspot.com/?device=tenderloin
http://review.cyanogenmod.com/#q,status:merged+branch:ics,n,z
http://jenkins.cyanogenmod.com/
If you have issue with this rom just WIPE ALL and try again.
>>>Please don't report bug if you don't use stock CM9 kernel!<<<
Official Cyanogenmod forum for HP Touchpad - http://forum.cyanogenmod.com/forum/504-hp-touchpad/
Official CyanogenMod Nightly are finally here for our Touchpad, feel free to discuss about this here.
If you use a different configuration than 'official' nightly this is probably not the good thread to discuss about it (different kernel, patches version)
F.
My favourite Nexus One guy is here Nice to see you here...
...HW Accel. is already included?
...What about Cornerstone?
Thanks for the official Nightly Thread
amazing,finally official nighties is here ,many thanks
Officials nightly builds \o/
thanks
How we can change dpi to 120?
Using LCD density modder?
ivangs1 said:
How we can change dpi to 120?
Using LCD density modder?
Click to expand...
Click to collapse
build.prop
Envoyé depuis mon GT-I9100 avec Tapatalk
great rom .
when playing music from speakers, it will sound distorted when the screen is off. When screen is on, its back to normal again.
mgear356 said:
when playing music from speakers, it will sound distorted when the screen is off. When screen is on, its back to normal again.
Click to expand...
Click to collapse
that has been a problem since day 1 of CM9 alpha 0 for touchpad
menting said:
that has been a problem since day 1 of CM9 alpha 0 for touchpad
Click to expand...
Click to collapse
Crap guess that will stay an issue for a while...
TurboTronix said:
Crap guess that will stay an issue for a while...
Click to expand...
Click to collapse
try to lower the volume 2-3 notches below maximum. I recall some people having luck with that.
menting said:
try to lower the volume 2-3 notches below maximum. I recall some people having luck with that.
Click to expand...
Click to collapse
This worked for me, specifically 4 notches below. Didn't even notice the screen turned off in its own. If you have an EQ like DPS Manager or whatever is built into the music app you can turn the levels down so turning the device volume up higher doesn't sound distorted or too loud.
Just a heads up his is when I was using CherryKANG 0.9.2. I'm going to be testing this specific ROM tonight or tomorrow.
Does anyone know the new adreno 2xx drivers are merged into this? I saw a few mentions of com, so I thought they were.
---------- Post added at 09:52 PM ---------- Previous post was at 09:35 PM ----------
ICS 4.0.4 was just merged! Does anyone know when the nightlies come out?
travisross69 said:
Does anyone know the new adreno 2xx drivers are merged into this? I saw a few mentions of com, so I thought they were.
---------- Post added at 09:52 PM ---------- Previous post was at 09:35 PM ----------
ICS 4.0.4 was just merged! Does anyone know when the nightlies come out?
Click to expand...
Click to collapse
From the repository, it seems that Trebuchet was only updated to support 4.0.4 ??
edit : I see it on AOSP, can you tell me where you see it merged on CM9? (I only see that they are starting to sync for CM9, but nothing about it being done)
menting said:
From the repository, it seems that Trebuchet was only updated to support 4.0.4 ??
edit : I see it on AOSP, can you tell me where you see it merged on CM9? (I only see that they are starting to sync for CM9, but nothing about it being done)
Click to expand...
Click to collapse
Here at the git http://review.cyanogenmod.com/#q,status:merged+branch:ics,n,z
I learned it was done through another thread.
travisross69 said:
Here at the git http://review.cyanogenmod.com/#q,status:merged+branch:ics,n,z
I learned it was done through another thread.
Click to expand...
Click to collapse
I9f7e3fb8 4.0.4 merge (MERGED)
this one?
this one only had 2 files changed though. Maybe to update trebuchet to support 4.0.4?
sahhar1993 said:
build.prop
Envoyé depuis mon GT-I9100 avec Tapatalk
Click to expand...
Click to collapse
I have tried but i have problems with home screen - not all icons fits.
Would love a script to download, clear Dalvik and apply on timer.
Has anyone done this yet?
try nova launcher. its good and better
Envoyé depuis mon GT-P7500 avec Tapatalk
Warning!
I don't have this phone, so Rom may not booting or have some bugs, Odin and official firmware is your best friend, member this.
Before installation please read Installation process from downside. To install any custom ROM 4.1+ you need official JB from Samsung before and CWM Recovery KitKat compatible. If you are already on any custom ROM, just read installation process.
###########################
Welcome.
Here is MIUI V5 based on android 4.4.4 thread.
Problems:
• ?
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
###########################
Informations, please read:
• Novathor Settings (isn't in Rom because may causing reboots, is not fully compatible with Miui kernel):
http://www.mediafire.com/?43cgvk2mwgyb93i
• MIUI doesn't support ART (maybe V6 yes)
• MIUI doesn't support SELinux, is disabled
• Gapps are inside, please do not flash any others because we don't have more space on /system
• Rom is rooted but you must manually enabled it in Security/Permissions/ROOT Permission
• On default, you cannot download biggest files from mobile data, you can disable it in Tools/Downloads/Settings/set to Unlimited
• This floating button is Mi-POP, disable it in Settings/Stock Settings/Mi-POP
• You can control performance in Settings/Stock Settings/Performance. You should set here lowest min free killer: Medium and set up on boot.
Stock Conservative and Row values are good for daily use.
• Material design of keyboard is in keyboard settings.
• DSP Manager not working with stock Miui Player
• You can't use any kernel for KitKat (because of some changes in ramdisk and selinux)
Click to expand...
Click to collapse
###########################
Installation process:
• download ROM and save on your external/
internal SD
• go to Recovery and make BACKUP of current
ROM in Backup and Restore option
• if you move up from:
A) previous version of this ROM do WIPE CACHE
B) any other ROM do WIPE DATA/FACTORY
RESET + MOUNTS & STORAGE/FORMAT SYSTEM
• choose install zip from and select ROM, wait for
completed installation
• now set reboot system now option and wait to
system boot up
• done
Click to expand...
Click to collapse
###########################
Download Rom:
http://www.mediafire.com/?cczy0ox6ki040bz
MD5(check original package size)
8D48396A094D57ADBBEC0C1A0B2E69DE
Click to expand...
Click to collapse
###########################
Full credits to:
golden-guy | ZduneX25 | Bx16 | h3llrais3r | TeamCanjica | miui.eu | xiaomi | MiuiPolska | zwliew | Android Does | Omni | Google
Nice work...! Downloading 47%.....will test and let you all know.
Is it really for the i9070?
Franciscormj said:
Is it really for the i9070?
Click to expand...
Click to collapse
For convincing you can check the file name of downloads on mediafire.
MIUI_V5_KK_I9070
TPD-21 said:
For convincing you can check the file name of downloads on mediafire.
MIUI_V5_KK_I9070
Click to expand...
Click to collapse
Thank you so much! I'm asking it because you know, the screenshot is showing us another model^^
The ROM Boots fine, everything works! Some Lags as expected and overall the phone is a bit slow..may be Miui is a bit heavy on NovaThor. Setting up the phone for the first time is a pain. Did not notice any battery drain so far but still testing.
Edit: MIUI is stylish...but using Nova launcher for an App drawer
arneldna said:
The ROM Boots fine, everything works! Some Lags as expected and overall the phone is a bit slow..may be Miui is a bit heavy on NovaThor. Setting up the phone for the first time is a pain. Did not notice any battery drain so far but still testing.
Edit: MIUI is stylish...but using Nova launcher for an App drawer
Click to expand...
Click to collapse
As i expected, miui laggy...
@PolishVodka : is there any way to fix this lag ?
@PolishVodka i saw you and some other guys compiled a booting cm12 for the ace 2.
I was curious whether there are any plans for janice too? :highfive:
Extreme lag rom, It's not worth downloading it
Idk whay's wrong
Franciscormj said:
Extreme lag rom, It's not worth downloading it
Idk whay's wrong
Click to expand...
Click to collapse
Just like past versions of MIUI for our device...
it is nice to see that even after so long time, our phone is not dead...yet.Almost developer and teams stopped development and support updates because they have set priority for Android 5.Is appreciated what makes @PolishVodka.
after serveral over of using so far so good... but there are only a problems I facing is screen shuttering(I don't know it called shuttering or something)the screen will sudden flash for 1 sec,if I dint remember wrong this is cause by the kernel cause of minimum CPU frequency keep revert to 400MHz and made the screen blink or flash. Most obvious screen blinking or flashing is when I open the music player apps..... non stop blinking(I thought my phone' screen are dying LOL...BTW nice ROM
And oh yea...I have enable high accuracy mode in GPS but Facebook apps still wan me to setting the GPS ...any solution?
I have precisely the same. The ROM is beautiful. A few amendments and will stay with me permanently.
It is verry laggy and high ram consumption.
One of i.e: i open browser ( only one tab), go to xda, put it in background, open it again and is re-opening because was closed lol.
@PolishVodka: Does miui lags on galaxy ace? There is nothing we can do to make it faster on janice? ... Even debloated miui based on jb lags.
Im using this ROM two weeks and laggs missing. Beauty full ROM.
Wyklawiaturowane SwiftKeym
markusbrutus73 said:
Im using this ROM two weeks and laggs missing. Beauty full ROM.
Wyklawiaturowane SwiftKeym
Click to expand...
Click to collapse
How the hell lag missing? You installed some tweaks ? If yes, tell us too. Or you just kidding ?
Force said:
How the hell lag missing? You installed some tweaks ? If yes, tell us too. Or you just kidding ?
Click to expand...
Click to collapse
This ROM will be updated?
No fix. Ondemand + sioplus, im not kidding. Installed on clean JB with temporary CWM. Procesor min 200Mhz max 1000Mhz. Working very good. Installed only needed aplication. Everything like in first post.
Wyklawiaturowane SwiftKeym
---------- Post added at 10:27 PM ---------- Previous post was at 10:25 PM ----------
Only sometimes screen are blink.
Wyklawiaturowane SwiftKeym
xiaohun said:
This ROM will be updated?
Click to expand...
Click to collapse
I don't know. I'm not the developer.
markusbrutus73 said:
No fix. Ondemand + sioplus, im not kidding. Installed on clean JB with temporary CWM. Procesor min 200Mhz max 1000Mhz. Working very good. Installed only needed aplication. Everything like in first post.
Wyklawiaturowane SwiftKeym
---------- Post added at 10:27 PM ---------- Previous post was at 10:25 PM ----------
Only sometimes screen are blink.
Wyklawiaturowane SwiftKeym
Click to expand...
Click to collapse
I installed it and didn't install any app and it lag too much. I don't understand how you don't have lag . Also it has worst multitasking. It's impossible to not have lag,other people said that is laggy too and i tested it too...
What firmware are you using? Although i don't think it matter so much.
I have base XXLQE. I installed this ROM two times. First time i have lag, too much. Second time clean instal and im very happy.
Wyklawiaturowane SwiftKeym
Welcome to
zephiK's
Questions & Answers/Troubleshooting
Discussion thread[SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP
hlimbu00 said:
i have rebooted lot of times after flashing this rom.....like after changing display dpi, after flashing Semaphore, after installing adaway...and all....works fine here.
something must be wrong on ur side....is it ur clean flash?
Click to expand...
Click to collapse
I am having the same problem boot loader and twrp all upto date also clean flash yet still system ui crashes
thesingh603 said:
I am having the same problem boot loader and twrp all upto date also clean flash yet still system ui crashes
Click to expand...
Click to collapse
just so u know...i read somewhere latest twrp is having issues....may b thats the problem
I tried 2.8.5.2 and 2.8.6.0
How did you flash it and what did you use to get it to work.
~Sorry been active on Android Central so I'm not a noob at this
---------- Post added at 04:38 AM ---------- Previous post was at 04:34 AM ----------
hlimbu00 said:
just so u know...i read somewhere latest twrp is having issues....may b thats the problem
Click to expand...
Click to collapse
What did you use for your recovery and what were the procedures
thesingh603 said:
I tried 2.8.5.2 and 2.8.6.0
How did you flash it and what did you use to get it to work.
~Sorry been active on Android Central so I'm not a noob at this
---------- Post added at 04:38 AM ---------- Previous post was at 04:34 AM ----------
What did you use for your recovery and what were the procedures
Click to expand...
Click to collapse
i have twrp 2.8.4.....so i way i flash is....i wipe(clean) data,dalvik,cache,system(advanced wipe)....first....then reboot the recovery again then use wipe to factory reset option...then flash ROm, Gapps and Supersu and reboot.
my way of wiping might not be necessary but i have kinda OCD on this clean flash thing
hope it helps u.
good luck
The led notification
I flashed this amazing rom, but the led with color that indicates the percentage of battery doesn’t appear, and the option to select the color of notification with the respective app, Is there this option? If no, is there an app that can do it?
Love your work!
Thanks for the great ROM! Very stable and smooth!
P.S.: Is there a toggle for the Google search bar in recents?
Lazgo said:
Thanks for the great ROM! Very stable and smooth!
P.S.: Is there a toggle for the Google search bar in recents?
Click to expand...
Click to collapse
Originally there was a toggle but for simplicity purposes, I removed the toggle because from a design perspective, it's useless to have a toggle there and majority of users will disable the search bar in recents anyway because it is a waste of space in recent apps.
You have multiple ways to access Google search bar (e.g. nav ring, home screen widget, google now). Accessing google search via recent apps is something I personally never ever go to so it is meaningless to have the toggle there to keep the Chroma settings menu simple and clean.
Thanks for the rom
I add some reboot when turn on the 3g with the latest version ?
Does the Franco Kernel R216 work with the latest Chroma Build ?
---------- Post added at 07:54 PM ---------- Previous post was at 07:38 PM ----------
Does Franco Kernel work on the latest build
shamru said:
Does the Franco Kernel R216 work with the latest Chroma Build ?
---------- Post added at 07:54 PM ---------- Previous post was at 07:38 PM ----------
Does Franco Kernel work on the latest build
Click to expand...
Click to collapse
Nope
In the latest test build yesterday, am not able to access the quick settings from navigation pull down. Also notifications do not appear on the left side of the status bar
Does anyone else experience this?
I switched to terminus 5.1 and experienced the same issue!
Is this a bug in 5.1 or am I missing something?
NOTE : Tried clean flash with dalvik wipe and latest superSU with no improvement. Even tried Hellscore and Semaphore kernels.
need help
rom is amazing great job...but cant instal layers??help guys
I just updated to the last version and google calendar doesn't work for me. When i open the app, the events don't synchronize.
What can i do?
Please, someone put another link to download this amazing rom, i can't download from androidfilehost.com, thanks
Just flashed 5.1 r3 franco but when it boots for the first time it gives a message saying "unfortunately setup wizard has stopped". I can access notifications and settings but there is no home screen. Did factory wipe and reflashed but still same message. Any help is appreciated.
In the morning when I power on tho device, it shutdown because says me that there battery is 0, solo in plug there charger, power on button the battery is normal, so I must start the device with the charger! I thing that there is a problems with the rom. I have installed the Franco Kernel one.
I'm also getting system ui fc with battery saver on franco kernel version. I will try to dirty flash anykernel version and see what happens.
---------- Post added at 07:11 AM ---------- Previous post was at 06:20 AM ----------
Just flashed anykernel version and the bug persists. If I enable battery saver and turn off screen, when I turn it on back again I get System UI FC and wallpaper changes to stock chroma wallpaper.
I have force close google camera with chroma anykernel + franco 217
Hello
Always i said that my lg g3 is special then every g3 that I'm used but how it's possible that i get a 59000 antutu benchmark score?
maybe you live in Antarctica ?! Low temp , BiG Score
guest0022 said:
maybe you live in Antarctica ?! Low temp , BiG Score
Click to expand...
Click to collapse
Hehe I live in Israel and have more friends with lg g3 and they get 30000
I get 59k as well.
Well 58943 something like that, different custom ROMs and kernels seem to have a big difference in antutu scores.
I am using AICP with whatever kernel it comes with at the moment.
pops106 said:
I get 59k as well.
Well 58943 something like that, different custom ROMs and kernels seem to have a big difference in antutu scores.
I am using AICP with whatever kernel it comes with at the moment.
Click to expand...
Click to collapse
Manged to get 60143 score on my lg g3 xD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[emoji14]
Sent from my LG-D855 using Tapatalk
TheBerebian said:
[emoji14]
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
There are scores over 70k around. Specially with exceed kernel
Thats my score
I'm used the rom named PRIME G3 and I'm get 59187
Update Managed to get 62189 score on fulmics 6.0
skyler13 said:
Update Managed to get 62189 score on fulmics 6.0
Click to expand...
Click to collapse
do you use any specific Kernel or stock ?
Scherbe123 said:
do you use any specific Kernel or stock ?
Click to expand...
Click to collapse
Stock kernel that came with the rom
On fulmics
I also get 60742
yes, stock MM does perform 60k+ tests.
^^ for me the same rom, the same default kernel gives 54k... Should i try to put my G3 to the fridge and then perform a test?
---------- Post added at 10:04 PM ---------- Previous post was at 09:59 PM ----------
Oh, i just got 63459 after i turned off wifi and mobile data...
Nice!! Wonder what it would be if you placed the phone in the freezer for 10 mins then tried again lol
Attached is my score on stock MM non root after the fujipoly 0.5mm thermal pad mod
Phone runs cool to the touch no matter what I toss at it
kicikk said:
^^ for me the same rom, the same default kernel gives 54k... Should i try to put my G3 to the fridge and then perform a test?
---------- Post added at 10:04 PM ---------- Previous post was at 09:59 PM ----------
Oh, i just got 63459 after i turned off wifi and mobile data...
View attachment 3846826
Click to expand...
Click to collapse
Breno Spangler said:
There are scores over 70k around. Specially with exceed kernel
Click to expand...
Click to collapse
Damn power of numbers. Flashing right now xceed kernel to see these 70k+ results
kicikk said:
Damn power of numbers. Flashing right now xceed kernel to see these 70k+ results
Click to expand...
Click to collapse
The maximum I got was 67k with thermal pad mod and xceed.
Remember to get the latest nightly.
Tried already with latest official but it gave me about 50k and FM radio was broken. So i'm trying now with the latest nightly as you suggest. But i have an impression that all animations are a bit laggy here. At least the FM radio works good here.
Antutu results in 3...2...1...
---------- Post added at 10:50 PM ---------- Previous post was at 10:46 PM ----------
55692...
---------- Post added at 11:05 PM ---------- Previous post was at 10:50 PM ----------
57952. Are there any particular settings to be done in order to achieve 70k results?
For those of you with 70k+ antutu,
Please post your CPU's PVS & bin number.
http://forum.xda-developers.com/lg-g3/help/g3-cpu-binning-t2822661
I bet this is the difference
You can find this in the hidden menu
Disclaimer: All the work above is not mine, i'm just sharing this rom. Of course all the work is based on the work previously made by @Moyster so a big thanks to him first of all and go check out is job on Github and xda! The work is made by Lunik and you can find it here: http://l-rom.ru/ Beta 2 made by @ky2zoff
Click to expand...
Click to collapse
Resurrection Remix OS 5.8.3 for M2 Note
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
#Working:#
Everything should be working
(Yes, Camera Works!)
#Not Working:#
Let me know
DOWNLOADS:
Stable 1: ( https://yadi.sk/d/pxeJeIfh3Mx7Lu )
Youtube now works
New RamDisk (reduced battery drain, improved performance)
Connectivity Fixes
Security Patch August 2017
Added PIE
Added MTK Eng
Release Candidate 1: ( http://www.mediafire.com/file/2zp02jppjjs213s/RR-N-v5.8.3-20170706-m2note-Unofficial.zip )
Security Update to June 2017
Better OMS Support
F2FS Working
Smoother Performance and Battery Life
Disable HW overlays and Live Display for Performance
Magisk Manager Built-In
Beta 1: (http://www.mediafire.com/file/h2nrt5qv3zd9ew6/Resurrection-Remix-M2Note-v5.8.3_L-ROM.RU-20170614.zip)
First Release
Camera fully working
Security Patch: June
Thanks To:
@Moyster so go check out his works (LOS14.1: https://forum.xda-developers.com/meizu-mx/orig-development/rom-lineageos-14-1-meizu-m2-note-t3551287)
(LOS13: https://forum.xda-developers.com/meizu-mx/orig-development/rom-cm-13-0-meizu-m2-note-t3525030)
(CM12.1: https://forum.xda-developers.com/meizu-mx/development/beta-cm-12-1-meizu-m2-note-t3458856)
@ky2zoff
thank you for porting rom
amazing work
Rom is for M2 Note
Bang Thien Minh said:
thank you for porting rom
amazing work
Click to expand...
Click to collapse
I haven't ported the rom, i just created the xda thread so that not only the ones in contact with 4pda can use that.
faffu41 said:
I haven't ported the rom, i just created the xda thread so that not only the ones in contact with 4pda can use that.
Click to expand...
Click to collapse
oh! but i hope you can support it along time while bug error from user
wifi take have along time to connect , flash gapps but Ch Play Not work..
Substratum cannot change themes,3g/4g not work in first logon,must be restart 2-3 times
Bang Thien Minh said:
wifi take have along time to connect , flash gapps but Ch Play Not work..
Substratum cannot change themes,3g/4g not work in first logon,must be restart 2-3 times
Click to expand...
Click to collapse
Wifi connect in a matter of seconds, gapps installed with "open gapps" 3g / 4g started the first time.
faffu41 said:
I haven't ported the rom, i just created the xda thread so that not only the ones in contact with 4pda can use that.
Click to expand...
Click to collapse
ali288 said:
Wifi connect in a matter of seconds, gapps installed with "open gapps" 3g / 4g started the first time.
Click to expand...
Click to collapse
thank! may be my device :$$
---------- Post added at 05:34 AM ---------- Previous post was at 05:31 AM ----------
Did you try f2fs with this RR 7.1.2?
---------- Post added at 06:48 AM ---------- Previous post was at 06:47 AM ----------
[/COLOR]
Bang Thien Minh said:
thank! may be my device :$$
---------- Post added at 05:34 AM ---------- Previous post was at 05:31 AM ----------
Did you try f2fs with this RR 7.1.2?
Click to expand...
Click to collapse
On f2fs RR does not load, moved back to ext4
Thank you for moving the rom form 4pda. The froum is also very good.
ali288 said:
---------- Post added at 06:48 AM ---------- Previous post was at 06:47 AM ----------
[/COLOR]
On f2fs RR does not load, moved back to ext4
Click to expand...
Click to collapse
yes! i hope you can develop it on beta 2 ..etc..
i will find bug and error and report to you !
I flashed it and for now everything works fine.
Did full wipe,flashed open gapps and supersu 2.82.
I didnt get one force close,Google setup worked just fine.
Will report further when i charge up to 100% so i can test everything.
Thanks for sharing this rom.
Hi I'm testing this software for hour and is possibile to make navigation bar on screen? I have it on LineageOS. And is possibile to turn off phisical home button because my is broken. Sometimes it "click" back couple times.
What s the name of Tweak UI and how can I install it on LineageOS?
rom is not installing
getting error 7
janek125 said:
Hi I'm testing this software for hour and is possibile to make navigation bar on screen? I have it on LineageOS. And is possibile to turn off phisical home button because my is broken. Sometimes it "click" back couple times.
What s the name of Tweak UI and how can I install it on LineageOS?
Click to expand...
Click to collapse
yes its possible. Just go to Settings > Configurations > Panels(or something like that i didnt remember) there you will get an option to enable on screen nav keys. You can also change the nav keys style to stock, omni or slim rom style. :good:
---------- Post added at 04:00 AM ---------- Previous post was at 03:59 AM ----------
amitahirwar24 said:
rom is not installing
getting error 7
Click to expand...
Click to collapse
try using twrp version 3.1
---------- Post added at 04:02 AM ---------- Previous post was at 04:00 AM ----------
I was waiting for this ROM for a very long time. Thanks
Btw few things like Reading mode, when turned on, the phones gets lil slow maybe because its ported.
getting same error 7 again with twrp 3.1
[/COLOR]
try using twrp version 3.1
---------- Post added at 04:02 AM ---------- Previous post was at 04:00 AM ----------
i installed twrp 3.1 but till getting same error
this time i am adding screenshots
please help me regarding this isuue
Strange..i didnt face such problem while flashing this zip. Try to google the problem.
Suvam Mondal said:
Strange..i didnt face such problem while flashing this zip. Try to google the problem.
Click to expand...
Click to collapse
I already tried lineage,resurrection and miui 8 earlier but I didn't face this type issues
should i checked(wipe) internal storage also?
---------- Post added at 07:48 AM ---------- Previous post was at 07:25 AM ----------
Suvam Mondal said:
Strange..i didnt face such problem while flashing this zip. Try to google the problem.
Click to expand...
Click to collapse
this time installation is done i.e. zip file flash successfully, but device unable to boot up stuck on meizu logo and written normal boot
at lower left screen panel
amitahirwar24 said:
I already tried lineage,resurrection and miui 8 earlier but I didn't face this type issues
should i checked(wipe) internal storage also?
---------- Post added at 07:48 AM ---------- Previous post was at 07:25 AM ----------
this time installation is done i.e. zip file flash successfully, but device unable to boot up stuck on meizu logo and written normal boot
at lower left screen panel
Click to expand...
Click to collapse
Which device are you using ? And what is your device code name ?
scroll lag