Related
Ok, so I was playing around with the new Root Tools app and made a few, what I thought were safe, tweeks to the system and rebooted the phone. It gets past the M screen, runs the boot animation and then starts the boot animation again. No way out except to pull the battery.
How can I get it out of this endless bootloop? If I have to factory reset and start again from scratch, so be it. I would just like to know how.
I've tried holding down different button combinations on boot but haven't come up with the right sequence I guess.
I've also tried pulling the battery as the animation starts, then putting it back in and rebooting which is supposed to call up the recovery mode, but it doesn't. I'm not sure what to try next? I wish these things had a reset button
It's a Droid 2 Rooted with the stock rom running Froyo 2.2. I have the Bootstrap recovery loaded and did a backup with the clockwork recovery. I also have, and use, Titanium Backup Pro for Root.
After bootlooping pull the battery and put it back in. Then plug the droid 2 in with the cable either wall or USB will work. Then turn it on and it should get you recovery. The phone has to be completely off when you plug it in though.
Sent from my DROID2 using XDA App
EDIT: I tested it and USB won't work (at least for me) better off just using the wall plug.
Thanks, but that not working either. When I plug in the cable after the battery pull it starts up automatically and goes to the battery charge screen. I then shut it off and start it back up with no battery but plugged in and it goes right back into the boot loop after the M screen.
The batter charge screen is what you want. Just press the power button after you get the charge screen and you'll be booted into clockwork.
But in order to factory reset from a bootloop you have to flash an .sbf theres a few different tutorials. One in Windows, Another in linux/mac, and another in linux but for windows machines through an Ubuntu livecd(that I made).
Oh, OK I thought it was going to go right into recovery mode. Good to know.
I finally figured out how to get into the stock recovery and bootloader, so I tried to run the stock restore but after it wiped the data, it couldn't find the recovery file! So then I read in another post about using RSDlight 4.9 to do an sdf restore so I used that method. Of course while it was flashing I did come across your Ubuntu method and that does look like it would be a simpler process. I'm going make one of those CD's to have for next time.
Anyway, I was able to get it back to stock. It looks like most of my stuff is still on the SD card, so that's a bonus! I'll have to re-root before I can restore everything via Titanium, but that's going to be tomorrow's project. As for now just happy to to have my phone back. Especially before the wife (who has been telling me for weeks to stop F'in with it) found out .
I really appreciate that you took the time to help, thanks again!
No problem.
Could you change your Thread title to include [SOLVED]. Thanks
Can you please explain to me how you fixed this problem? I am currently having this problem now.
Please do not open/post in multiple threads for the same issue. This is a waste of time as we can see you have an open thread. Please reply to my response in your original thread for further assistance. (http://forum.xda-developers.com/showthread.php?t=824254)
newk8600 said:
Could you change your Thread title to include [SOLVED]. Thanks
Click to expand...
Click to collapse
Ok, your wish is my command! ;-)
Sent from my DROID2 using XDA App
Can I close this?
Yes. This issue has been resolved.
theecho said:
Yes. This issue has been resolved.
Click to expand...
Click to collapse
Ok, thanks
I don't knwo where to post this exactly so here it goes.
I installed revolution 2.09 on my rooted HTC HD without any problems.
Run perfectly. Then today I installed a ROM of a theme from this forum as well called media 1.3 with rom manager.
After the reboot my phone only shows a the text android with a slight moving glow over it. It does not repsond to anything any more. I removed the battery but the same thing is happening.
Did I brick it? What can I do?
Willem Kloppenburg said:
I don't knwo where to post this exactly so here it goes.
I installed revolution 2.09 on my rooted HTC HD without any problems.
Run perfectly. Then today I installed a ROM of a theme from this forum as well called media 1.3 with rom manager.
After the reboot my phone only shows a the text android with a slight moving glow over it. It does not repsond to anything any more. I removed the battery but the same thing is happening.
Did I brick it? What can I do?
Click to expand...
Click to collapse
thats just the default android boot screen, looks like the theme messed up your framework... hold on i'll make a .zip you can flash from recovery to fix it
Thanks, but how do I get the zip on the phone? It does not react to anything anymore. I attahced it to my PC but nothing....
Willem Kloppenburg said:
Thanks, but how do I get the zip on the phone? It does not react to anything anymore. I attahced it to my PC but nothing....
Click to expand...
Click to collapse
im just downloading the rom for you now so i can extract the framework, if you pull your battery out, you can either plug in your charger while its off, this will bring up recovery, or while its off, hold vol down and press power, that will take you to bootloader, and just pick recovery from the list, now when in recovery, if you navigate to the mounts and storage menu, choose the option mount usb storage, you can now connect to a pc as a disk drive and copy stuff to your sd card
im having trouble uploading attachments to xda at the min dya want me to upload it to megaupload for you?
AndroHero,
Thank you for helping me out. I didn't know about the vol down press power option which allows you to acces the sd card and intall a new rom. I had the revolution rom 2.0.9 already. It's installing as we speak. Much thanks for the tips!
To early hooray. I choose the option with the revolution zip for a complete install. After the install I selected rebouut system now. Now it stays on the white HTC screen with the text HTC quitely brilliant. Flashing every 3 seconds or so....
What to do now?
Everything is resolved. revolution is up and running again. I had to un the fullwipe.zip and that did it!
THANKS a lot for all the tips....again
Willem Kloppenburg said:
To early hooray. I choose the option with the revolution zip for a complete install. After the install I selected rebouut system now. Now it stays on the white HTC screen with the text HTC quitely brilliant. Flashing every 3 seconds or so....
What to do now?
Click to expand...
Click to collapse
Did you do a full wipe before re-flashing your ROM? even if you did just repeat the process , full wipe /cache, /dalvik-cache, /system and then re-flash the rom fingers crossed it should work
Hi,
I am having a similar problem. I tried flashing the cyanogen mod and after installing it the phone doesnt boot up. Its stuck on the t-mobile boot up logo. Ive tried restoring my back up but I get the same problem.
Any help would be great!
Thanks
mo123456789 said:
Hi,
I am having a similar problem. I tried flashing the cyanogen mod and after installing it the phone doesnt boot up. Its stuck on the t-mobile boot up logo. Ive tried restoring my back up but I get the same problem.
Any help would be great!
Thanks
Click to expand...
Click to collapse
boot into recovery do a full wipe (system, data, cache and dalvik-cache) then re-flash your rom
mo123456789 said:
Hi,
I am having a similar problem. I tried flashing the cyanogen mod and after installing it the phone doesnt boot up. Its stuck on the t-mobile boot up logo. Ive tried restoring my back up but I get the same problem.
Any help would be great!
Thanks
Click to expand...
Click to collapse
Could it be possible that you installed cwm 3005 and tried a restore with that. I had the same problem. Went back to cwm 2.5.x and then restore worked.
Sent from my Desire HD
I think there will be a lot of scare because of this CWM 3x...
Same happened to me the other day, stupidly accecpted the update prompt from Rom Manager, did my backup and went to install Cyanogen 6... Got stuck at HTC logo next boot.
Thankfuly, had Leedroid 2.0 on the SD, too, and that one flashed properly
Thing is that when I try to downgrade the Recovery to 2.5x I get an error and really can't be bothered with ADB pushing stuff around, so using Cyanogen 7 for the time beeing
Anyhow, CWM 3.x is likely your problem, easy to fix ^^
Wanting to change my theme on the Samsung spica I had theexact problem on cyanogen mod. Had to redo the whole rooting and installing the Rom again to get to work.
Sent from my Desire HD using XDA App
yes, is some script...back to recovery 2.x
This may "wreak of non-search" and I am sorry if it does. While I have searched, the overall panic that one experiences when you suspect a brick and cannot afford to have a brick.... (that, plus a friend purchased this Glacier for me to help me get back on my feet with respect to career/employment, etc., so a good amount of guilt is thrown into this mix)... all prevents me from rationally and methodically searching thread after thread to figure out why I am having the problem I am having.
I will be as precise as possible.
1. Back in Feb., I perm rooted with visionary... then about 2 weeks later, I read that this root was not true radio s=off perm root, so I used adb and the scripts to perm root again--using the wiki as a guide. Saved a copy of the partition 7 bin on my laptop as an added precaution. Also, BTW, I never flashed the engineering HBOOT. It didn't seem essential to do so... PLUS, in almost every guide it warned that this was the most likely chance for one to f*ck up and brick, so in the interest of erring on the side of caution, I skipped that.
2. I kept stock ROM for several weeks after that... just enjoying root and freezing bloatware with Ti, and doing other root-enabled mods... nothing too involved.
3. About 1 week ago, I finally decided to flash my ROM. I had Rom Manager (paid version), and had flashed ClockworkMod Recovery 3.0.0.5. Further, as an FYI, I had/have numerous nandroid backups on the SD, plus several Ti backups of apps/data... even sync'd this with dropbox, so I can access those now (which are not of any help obviously).
4. I first flashed a CM7 nightly build--wiped data and cache, and as far as I know followed the guides precisely. All was well...new ROM worked alright... some bugs, but it was nice to have the new features, etc.. And of course the mental gratification of having 2.3.3 (GB) instead of 2.2.1 (boring old froyo). I updated the nightly maybe 2 times... in each case, I simply flashed without backing up those ROMS or wiping data/cache as they didn't seem necessary, plus I still had all my stock rom nandroid backups on the SD.
5. Then Last night, RC4 came out. I flashed this the same way... no wipe. This morning... after using it for awhile, I started to get forced close problems on numerous apps... and the one that was most bothersome was my Market app... So after trying to Fix Permissions using RM to no avail.... I decided to restore the last nandroid backup of my stock (rooted) ROM. All seemed well while the restore was progressing... I was powered by AC (as always). But when the phone rebooted at the end of the restore, it stayed at the MyTouch splash for a long time... longer than I thought was appropriate (~20 minutes). So, I took out the battery since nothing else responded, and tried to boot into recovery. WHen I tried this, I got 3 quick vibrate alerts, and a blank screen, with the LED flashing every second in an ominous disconcerting way. (!!) Again, I removed battery, then tried to start phone again normally. Same problem.... It won't go past the MyTouch splash.
Since I cannot get into the phone... I am of course panicked... I have ADB on my laptop if needed, but I really am at a loss as to why this happened, and what I can do at this point....
Please, please advise. My utmost appreciation and sincerest gratitude in advance for any assistance.
Thank you!!!
syntropic
syntropic said:
5. Then Last night, RC4 came out. I flashed this the same way... no wipe. This morning... after using it for awhile, I started to get forced close problems on numerous apps... and the one that was most bothersome was my Market app... So after trying to Fix Permissions using RM to no avail.... I decided to restore the last nandroid backup of my stock (rooted) ROM. All seemed well while the restore was progressing... I was powered by AC (as always). But when the phone rebooted at the end of the restore, it stayed at the MyTouch splash for a long time... longer than I thought was appropriate (~20 minutes). So, I took out the battery since nothing else responded, and tried to boot into recovery. WHen I tried this, I got 3 quick vibrate alerts, and a blank screen, with the LED flashing every second in an ominous disconcerting way. (!!) Again, I removed battery, then tried to start phone again normally. Same problem.... It won't go past the MyTouch splash.
Click to expand...
Click to collapse
Can you boot in to the bootloader?pull the battery put it in then hold the power button down and the volume rocker down?
should come up to a white screen.
take the battery out and let the phone sit a little bit. this has worked for others to get into hboot then recovery. Also if you get it going INSTALL THE ENG HBOOT! Can really help you with soft brick among other things.
Sent from my HTC Glacier using XDA App
Can you boot in to the bootloader?pull the battery put it in then hold the power button down and the volume rocker down?
Click to expand...
Click to collapse
No... that is what I meant when I said tried to "boot into recovery". And I got the 3 vibrate alerts and a blank screen, and nothing........
take the battery out and let the phone sit a little bit. this has worked for others to get into hboot then recovery. Also if you get it going INSTALL THE ENG HBOOT! Can really help you with soft brick among other things.
Click to expand...
Click to collapse
Will do... Thank you. DO you have any idea of where I f*cked up here??
Could be a number of things. Like wipe didn't go through completely , bad download, or just random crap out like a few others. Even flashing with the wrong cwr version can less to your issues. Lol like I said could be a number of things. Sorry I couldn't be more helpful.
Sent from my HTC Glacier using XDA App
OK... Good news. I am in now in CWR. BTW, this may have been something that was my mistake to begin with. When I originally tried to boot into Bootloader, I held the volume button UP. I just tried both up and down volume hold while powering on. When I hold volume up, I get 3 vibrate alerts and nothing. When I hold volume down, I go straight into the bootloader/HBOOT.
OK.. So as said, I am now in CWR. What is the best course of action here...?? Can I try to restore my nandroid backup (maybe a different one) of my old rooted stock ROM? Should I do a factory reset (prefer not to, but I submit to the advice of my more skilled android fans)?
Just a point in the right direction, and I think we can put this thread to bed. Thanks a million just for holding my hand while I fixed this....
I would wipe EVERYTHING but the sd card where your backup is, then attemp restoring whatever rom you had last. 2.2 and 2.3 use different versions of clock work and don't remember which 3.0.0.5 went with. So use that last one that booted and then updat clock work to 3.0.0.6 as it will flash both 2.2 and 2.3
Sent from my HTC Glacier using XDA App
syntropic said:
OK... Good news. I am in now in CWR. BTW, this may have been something that was my mistake to begin with. When I originally tried to boot into Bootloader, I held the volume button UP. I just tried both up and down volume hold while powering on. When I hold volume up, I get 3 vibrate alerts and nothing. When I hold volume down, I go straight into the bootloader/HBOOT.
OK.. So as said, I am now in CWR. What is the best course of action here...?? Can I try to restore my nandroid backup (maybe a different one) of my old rooted stock ROM? Should I do a factory reset (prefer not to, but I submit to the advice of my more skilled android fans)?
Just a point in the right direction, and I think we can put this thread to bed. Thanks a million just for holding my hand while I fixed this....
Click to expand...
Click to collapse
What recovery are you using? 3.0.0.5? and you're trying to flash a 2.2 ROM. Thats where the problem lies. See my post regarding this. It's in my signature, the green one.
I would wipe EVERYTHING but the sd card where your backup is, then attemp restoring whatever rom you had last. 2.2 and 2.3 use different versions of clock work and don't remember which 3.0.0.5 went with. So use that last one that booted and then updat clock work to 3.0.0.6 as it will flash both 2.2 and 2.3
Click to expand...
Click to collapse
OK... and neidlinger... I think I read that post before and didn't quite get the full understanding of it.... I grasp now that you can only restore a 2.2 with a 3.0.0.4 CWR.
EDIT: MUSTKll20... Well, you were right... This is not ROM specific. I tried Re-Flashing RC3, which previously worked fine. Now, since I have CWModRec 3.0.0.5, I need to use a 2.3 ROM.... So I thought I would start with this idea. So, I guess, I need to get whatever is corrupt deleted... So my only question thus remains: How do I wipe everything except the SD from within CWR?
And now that there seems to be a 3.0.0.6 which solves this mismatch trap, why would it not be simpler just to reflash the CM7 RC4, then update CWMod, then just see if my original force close issue is even still occurring, and if so, then I would flash/install eng. HBOOT, "Wipe Everything except SD" (btw, does CW have a selection for that? Is that factory reset? Or will a factory reset wipe my SD.... because obviously that would be bad)
I don't really now how to wipe the internal... Except if I had a terminal and used dd, but as much as I am comfortable with Linux, I still do not understand how the SD and the ROM are separated and why, and how, and what shell commands do what to each....
AND THANKS AGAIN SO MUCH YOU GUYS FOR TAKING TIME TO ANSWER MY CRISIS-INFUSED QUESTIONS!
syntropic said:
OK... and neidlinger... I think I read that post before and didn't quite get the full understanding of it.... I grasp now that you can only restore a 2.2 with a 3.0.0.4 CWR.
And now that there seems to be a 3.0.0.6 which solves this mismatch trap, why would it not be simpler just to reflash the CM7 RC4, then update CWMod, then just see if my original force close issue is even still occurring, and if so, then I would flash/install eng. HBOOT, "Wipe Everything except SD" (btw, does CW have a selection for that? Is that factory reset? Or will a factory reset wipe my SD.... because obviously that would be bad)
I don't really now how to wipe the internal... Except if I had a terminal and used dd, but as much as I am comfortable with Linux, I still do not understand how the SD and the ROM are separated and why, and how, and what shell commands do what to each....
AND THANKS AGAIN SO MUCH YOU GUYS FOR TAKING TIME TO ANSWER MY CRISIS-INFUSED QUESTIONS!
Click to expand...
Click to collapse
You can flash CM7RC4, and install 3.0.0.6. That's pretty much the only way you can fix it..
and android phone have a method of using a section of the SD card for their memory banks. I'm not really sure how it works either, but it does. You can wipe the internal w/o wiping the SDcard.
Wiping the phone from with in the recovery image will not touch the SDcard, it will only wipe the internal. You can format the SD card from the Recovery Image, but i'll leave that dog sleep so we do not it accidentally.
last little clean-up question.
Sorry to bump this... last LAST question...
Mustkll20: I realized that you were correct to suggest to wipe everything except the SD... Something is corrupt.
But I am not real sure exactly how to wipe EVERYTHING except the SD, from within CW recovery... Since that is the only mode I have available to me. Once I wipe, I will reinstall CM RC3, then update Clockworkmod Recovery to 3.0.0.6, and then try and download RC4 again using another method, and re-flashing.
I would trial and error this, but do not want to wipe the SD.
Thanks guys... seriously.
You can flash CM7RC4, and install 3.0.0.6. That's pretty much the only way you can fix it..
Click to expand...
Click to collapse
I didn't see your reply... ummm. and I do need to wipe.. Because I have tried to re-flash both RC3 and RC4, and I get what must be a "bootloop": During the CM splash, it stops and then reboots---over and over. It never did that before.... so my problem is something else...
I don't know what else there is besides the SD and the ROM, but whatever it is, I need to delete it. So should I do a factory reset???
Also, are you sure you are holding the volume down and pressing power to boot into recovery? The result you described is what happens when you hold the volume up and press power.
lowandbehold said:
Also, are you sure you are holding the volume down and pressing power to boot into recovery? The result you described is what happens when you hold the volume up and press power.
Click to expand...
Click to collapse
Yep... I know the thread is not for thrillseekers (i.e., its boring), but I mention that I discovered this phenomenon... so I really wasn't in all that bad a spot to begin with.
I still need to figure out how to fix my current problem.... all CM RCs (I can only flash 2.3 ROMs because of CW 3.0.0.5) go into what I guess is a bootloop. In other words, they do not ever boot, just crash and restart. And the RC3 ROM I used worked fine before this... so something else is causing this problem. I need to wipe everything I guess, but I just don't know how... without touching the SD card and from within Clockwork Recovery.
Ok. Go into recovery.
1. Wipe data/factory reset
2. wipe cache partition
Both of these are on the main screen.
Go to advanced
3. Wipe Davlik Cache
Go back to main screen
Go into mounts and storage
4. format boot
5. format system
Try all of that. It will not touch your sd card. After doing this flash the ROM again. Keep us updated and good luck.
lowandbehold said:
Ok. Go into recovery.
{...}
Try all of that. It will not touch your sd card. After doing this flash the ROM again. Keep us updated and good luck.
Click to expand...
Click to collapse
Thank you for the concise and thorough response!!!!!!! Id thank you, but have used up my allotment. get ya tommorow!!
And it worked! Thank you!
But.... ummm.... there is no market app. I would think the CM ROM would have this, but apparently it doesn't. I need to install Ti, etc. to restore all my apps.
Does anyone have a download link or at least a version # that is appropriate?
syntropic said:
And it worked! Thank you!
But.... ummm.... there is no market app. I would think the CM ROM would have this, but apparently it doesn't. I need to install Ti, etc. to restore all my apps.
Does anyone have a download link or at least a version # that is appropriate?
Click to expand...
Click to collapse
You can thank the Google c&d order for that. Go to cyanogenmod.com. there is a link there for the gapps zip.
Sent from my HTC Glacier using XDA App
OK... I thoght Gapps.zip was just Google Docs. Luckily, I had that on my SD card from one of my many ROM downloads. I see why they had to make it separate.
But I am installing it, and everything is great... And I learned a lot too... Which can only mean trouble.
Thanks!
Guys please I know this is the wrong forum but no one is answering help. At all. Alright, I went to flash the ICS Sense alpha, and needed to restore a backup. I went into hboot, and restored the PD98IMG.zip. Afterwards it said "Press power to reboot" so i did. The phone turned off, and now nothing. After a LONG time the phone turned on to the White HTC Splash and vibrated CONSTANTLY, until the battery was pulled. I tried volume down + power but nothing. Except for the occasional white screen, nothing. Please, anyone/.
You're bricked
Sent from my Desire HD using telepathy...
I think your phone had a bootloop. Did you already installed custom recovery? Can you enter it through fastboot menu (vol down + power)?
I doubt he's bricked,why are you restoring that zip? You restore your back up....from clockwork?
Sent from my Desire HD using XDA Premium App
It won't enter into fastboot. Occasionally the white HTC screen comes on with a constant vibrate and the only way to stop that is to pull the battery. No fastboot, no recovery, nothing.
It wouldnt enter into recovery so I had to take the long way, by using the PD98IMG
HTC_Phone said:
It won't enter into fastboot. Occasionally the white HTC screen comes on with a constant vibrate and the only way to stop that is to pull the battery. No fastboot, no recovery, nothing.
It wouldnt enter into recovery so I had to take the long way, by using the PD98IMG
Click to expand...
Click to collapse
I am confused. So what exactly happens when doing this:
remove or rename the PD98IMG on the sd card
pull the battery from the DHD
re-enter it and hold volume down and power until the hboot starts
navigate by volume down/up to Recovery and press POWER
If you had to restore back to factory, why bother flashing ICS?
You should get away by installing one of the RUU using PC. here is a guide on how to install RUU and you'll have to search this section to find a RUU or google it.
Though firstly i would ask you if you can go into the recovery mode anyhow since you're saying that your phone can get the HTC logo. For that, hold down POWER + volume DOWN key to get you into hboot (IF YOU CAN) and choose recovery from there, once in recovery, go to option where you wipe your data + cache, wipe both of em and try restarting again...If you can't even get into recovery then do the RUU way of getting the rom working.
EDIT:
I'm not sure what in the world happened, but it booted into the ATT stock ROM. After 30 minutes of vibration and idk what else, it finally booted.
Lol least its on
Sent from my Desire HD using XDA Premium App
HTC_Phone said:
EDIT:
I'm not sure what in the world happened, but it booted into the ATT stock ROM. After 30 minutes of vibration and idk what else, it finally booted.
Click to expand...
Click to collapse
Gratz, suppose this thread's unnecessary now?
Anyway take care of what you do: always do a nandroid backup prior to flashing everything. Better spend 5min for backup than 5 days without a phone.
I think know what happens. If I remember correctly you had your phone replaced. And it came with gb. The pd98 you flashed was the froyo one. Hence the crazy vibration and long boot time. If Im right thisvwill happen each time you reboot Until you get the gb bootloader back on
Also spamming the threads is a pretty good way of getting banned. Maybe zel or Andy will be nice about it
marsdta said:
I think know what happens. If I remember correctly you had your phone replaced. And it came with gb. The pd98 you flashed was the froyo one. Hence the crazy vibration and long boot time. If Im right thisvwill happen each time you reboot Until you get the gb bootloader back on
Click to expand...
Click to collapse
That sounds somewhat correct. I DID get it replaced, but had a GB PD98 on the SD card. Anyway, it vibrated for quite some time, and eventually the vibration stopped. So I let the phone sit as I figured out some way to salvage the phone. And the the next HTC splash booted, and the phone proceeded into the stock ROM. Idk what happened, but I'm not complaining.
Dear Lord, it just turned off and is doing it again. But, I'm praying for the best again. Thanks guys.
HTC_Phone said:
Dear Lord, it just turned off and is doing it again. But, I'm praying for the best again. Thanks guys.
Click to expand...
Click to collapse
When you succesfuly back in your phone, just root it with AAHK and install some custom ROM and you should be fine.
motherninja said:
When you succesfuly back in your phone, just root it with AAHK and install some custom ROM and you should be fine.
Click to expand...
Click to collapse
The phone itself is already rooted, but I tried booting into CWM, and it did the same thing as it did before. So I have to run the RUU, and then S on the phone, and run the hack kit again. I already ran the RUU once, and nothing.
Probably best just to start over and do everything again,even if you've already done it,maybe the root didnt work?
Your phones a nightmare mate
Sent from my Desire HD using XDA Premium App
So you intentionally created a thread in the wrong section?
I guess the rules don't apply to you then.
Ok.. so.
I had a not-working clockwork mod, and like an idiot I used the rom manager via android to flash a new rom. So - that rom is stuck in its boot up logo over and over (team kang). And isn't moving despite waiting 10 minutes, and my clockwork mod is non functional. I can see the options in CMW but if I click one of them - I dont get the options to chose a zip/it does reboot. It simply gives me the hat with the refresh logo and no options. So CWM is not functional.
Fastboot boots, but recovery sends me to non functional CWM.
S = off, and the phone is/was rooted.
Any advise?
I hope someone is awake... lol
Try to use adb/fastboot to flash 4ext recovery. Or a new cwm recovery. You really need a functioning recovery.
Sent from my HTC GLACIER using xda premium
Just sayin.. 4ext is a better recovery. However, if you prefer cwm, that is up to you. But if you can use adb to flash recovery, please do it, then from hboot go into recovery and flash a known working Rom...
Sent from my HTC GLACIER using xda premium
So your saying volume down while power on, boot up adb on the computer/fastboot on the phone and I can somehow push a 4ext to the phone? I'll give it a try but I'm lost at the moment.
Closest I came up with was downloading the stock rom/putting it on SD card and loading it up that way.
I'll go back to DEV and check into how to flash it, but I was under the impression you had to have a working rom.
...are you making selections in recovery using the trackpad?
There is no trackpad? Volume up and down.
I just flashed 2 versions of CWM and finally got options with the touch version - then of course I lost MY sd card somewhere? Which is such a joy because I'll never find it. So I am now going to load up a rom on the SD card then install it.
Ok, got the rom installed, for my personal SD card - the other phone is booting up now, if it doesn't work atleast I can mount the SD card through CMW and such. TY original poster, I didn't actually realize you could flash files directly from the computer to the phone.
This all started when I rooted this phone because it was having battery issues/wasn't running right, then it needed to update but wouldn't because CWM was installed - so I tried to put a different rom on it but that didn't work.
YES!!!! It has booted into android just now. Score.
TY posters.
nimkiel said:
There is no trackpad? Volume up and down.
I just flashed 2 versions of CWM and finally got options with the touch version - then of course I lost MY sd card somewhere? Which is such a joy because I'll never find it. So I am now going to load up a rom on the SD card then install it.
Ok, got the rom installed, for my personal SD card - the other phone is booting up now, if it doesn't work atleast I can mount the SD card through CMW and such. TY original poster, I didn't actually realize you could flash files directly from the computer to the phone.
This all started when I rooted this phone because it was having battery issues/wasn't running right, then it needed to update but wouldn't because CWM was installed - so I tried to put a different rom on it but that didn't work.
YES!!!! It has booted into android just now. Score.
TY posters.
Click to expand...
Click to collapse
no trackpad? do you have the Mytouch 4G?
the trackpad is the square like button in the bottom middle of the phone...
well anyway, i'm glad you figured it out and got it working.
nimkiel said:
There is no trackpad? Volume up and down.
I just flashed 2 versions of CWM and finally got options with the touch version - then of course I lost MY sd card somewhere? Which is such a joy because I'll never find it. So I am now going to load up a rom on the SD card then install it.
Ok, got the rom installed, for my personal SD card - the other phone is booting up now, if it doesn't work atleast I can mount the SD card through CMW and such. TY original poster, I didn't actually realize you could flash files directly from the computer to the phone.
This all started when I rooted this phone because it was having battery issues/wasn't running right, then it needed to update but wouldn't because CWM was installed - so I tried to put a different rom on it but that didn't work.
YES!!!! It has booted into android just now. Score.
TY posters.
Click to expand...
Click to collapse
Cmon...not even a clik on the thanks button? Those are like battle scars! I'm just kidding..glad it worked out for you. It hurts me to hear about a bricked mt4g. They are a dying breed...
Sent from my HTC GLACIER using xda premium
I actually didn't know there was a like button as this was one of my first posts really. But if you want an update, I flashed it through ADB and got a working bootloader then loaded ICS which completely didn't work.
This phone is for my mom's so I reflashed it to that Virtuous Unity rom/shes now complaining of some battery drain. I didn't install setcpu because they have something else running I saw? But maybe it needs to be setup? Either way I'll just install setcpu next time I see her.
Oh, as for the trackpad... *cough*. I've held the phones many times (hundreds), but never actually realized there was a trackpad on it. My mom used it in front of me shortly after I fixed her phone..
Getting more than a day out of a Sense 4 rom with decent use. Releasing this to the public in a couple days as INDIAN MADNESS, give it a shot