MIUI 1.11.18 SGS 2 Issue - Galaxy S II General

I am using 2.3.5 GT-I9100_XEN_I9100XWKJ3_I9100XENKJ1_I9100XXKI4
i am trying to install MIUI 1.11.18 mobile cannt install it. and restarts after copying files... nothing happen pls any one have point to point guide or video link.... thanks ....

Download the official rom, start your phone in recovery mode by pressing power home and volume up your phone must be rooted for this, then in recovery mode clear user data, cache and dev cache, then select install zip from sd go to your rom and install it restart the phone and you are ready to go
Sent from my GT-I9100 using Tapatalk

already done that... but can u please share links as well.... thanks in advance...

asif.malick said:
already done that... but can u please share links as well.... thanks in advance...
Click to expand...
Click to collapse
You must also format system in mounts and storage to make it work,
So wipe data, clear cache and dalvik cache, format system and flash the miui rom TWICE IN A ROW (really, not kidding). Let it boot and than reboot again
---------- Post added at 07:20 PM ---------- Previous post was at 07:15 PM ----------

Tell us what you have done and its easier for us to point out what is missing. There are dozen ways thing can go wrong

pcboyy said:
Tell us what you have done and its easier for us to point out what is missing. There are dozen ways thing can go wrong
Click to expand...
Click to collapse
sir i have followed the following steps.
1. install 2.3.5 from this website
http://www.cellphone-tutorial.com/2011/11/i9100xwkj3-android-235-gingbread.html
2. root it from
http://forum.xda-developers.com/showthread.php?t=1103399
but a yellow button is shown after rooting...
then after that by going into recovery mode, install update from sdcard...
followed the same way by which update galaxy s i9000...
then tried to install all these three versions
MiUI Android SGS2 1.11.11 RTL-sign.zip
miuiandroid_SGS2-1.11.18.zip
miuiscotland_I9100-1.11.18.zip
it just always resets.. nothing else happens...

asif.malick said:
sir i have followed the following steps.
1. install 2.3.5 from this website
http://www.cellphone-tutorial.com/2011/11/i9100xwkj3-android-235-gingbread.html
2. root it from
http://forum.xda-developers.com/showthread.php?t=1103399
but a yellow button is shown after rooting...
then after that by going into recovery mode, install update from sdcard...
followed the same way by which update galaxy s i9000...
then tried to install all these three versions
MiUI Android SGS2 1.11.11 RTL-sign.zip
miuiandroid_SGS2-1.11.18.zip
miuiscotland_I9100-1.11.18.zip
it just always resets.. nothing else happens...
Click to expand...
Click to collapse
You should wipe cache, dalvik cache, wipe data/factory format, and in mount and storage format system. Then flash Miui twice in a row, reboot, boot up and reboot again. That should do it. Miui has different system than Samsung

gee2012 said:
You should wipe cache, dalvik cache, wipe data/factory format, and in mount and storage format system. Then flash Miui twice in a row, reboot, boot up and reboot again. That should do it. Miui has different system than Samsung
Click to expand...
Click to collapse
before installing miui???

Yes, do the above steps and miui will get installed. Flash miui twice in a row without rebooting!

gee2012 said:
Yes, do the above steps and miui will get installed. Flash miui twice in a row without rebooting!
Click to expand...
Click to collapse
same happened... it just restarts.....

asif.malick said:
same happened... it just restarts.....
Click to expand...
Click to collapse
do you have usb debugging enabled in applications?
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
gee2012 said:
do you have usb debugging enabled in applications?
Click to expand...
Click to collapse
Restarts , you mean bootloop or startscreen with the S on it?

gee2012 said:
do you have usb debugging enabled in applications?
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
Restarts , you mean bootloop or startscreen with the S on it?
Click to expand...
Click to collapse
no usb debugging is not enabled and
yes. it goes into unlimited time bootloop....

asif.malick said:
no usb debugging is not enabled and
yes. it goes into unlimited time bootloop....
Click to expand...
Click to collapse
Oke, go back in recovery mode and wipe data/factory reset, wipe cache and dalvik cache and reboot

gee2012 said:
Oke, go back in recovery mode and wipe data/factory reset, wipe cache and dalvik cache and reboot
Click to expand...
Click to collapse
it dont went into recovery mode.. just simply remains in bootloop...

asif.malick said:
it dont went into recovery mode.. just simply remains in bootloop...
Click to expand...
Click to collapse
pull out the battery, wait 15 seconds, reinsert it. Go in recovery mode (volume up + Power + menu button). Wipe data factory reset, cache and dalvik cache and reboot

gee2012 said:
pull out the battery, wait 15 seconds, reinsert it. Go in recovery mode (volume up + Power + menu button). Wipe data factory reset, cache and dalvik cache and reboot
Click to expand...
Click to collapse
same s... happened.. GOD knows what is happening ... now my custom binary download is showing 13 COUNTS....

asif.malick said:
same s... happened.. GOD knows what is happening ... now my custom binary download is showing 13 COUNTS....
Click to expand...
Click to collapse
Do you have a working backup in recovery? Try to restore that, if not it`s best to flash back to stock rom for now. You can always root it and try again. For the binary count you should buy a jig to reset the counter.
Try to read about rooting and always enable usb-debugging when flashing custom roms/kernels
Look in Intratech`s thread for your stock rom, he almost has them all
Good luck

gee2012 said:
Do you have a working backup in recovery? Try to restore that, if not it`s best to flash back to stock rom for now. You can always root it and try again. For the binary count you should buy a jig to reset the counter.
Try to read about rooting and always enable usb-debugging when flashing custom roms/kernels
Look in Intratech`s thread for your stock rom, he almost has them all
Good luck
Click to expand...
Click to collapse
thanks for your time gee2012... and one thing more.. can u pls share a tutorial for sgs 2 or u can make 1 it for new users like me .. bundle of things...

if some else have solution pls share.

I tried MIUI and it stuck on boot screen, i read somewhere certain Roms need flashing twice so flash it then instead of rebooting flash it again then reboot
Sent from my GT-I9100 using XDA App

Related

[Q] [L7] Please help, its URGENT!!!! stuck on lg logo

Hi to all, i am stuck on lg logo, i can not enter in cwm, i can not enter in emergency mod on my l7 ( pull the VOL+ button, put the USB kabel in the PC and nothing). I do this: i am on v20d rooted, cwm, and i wanted to try AOKP, i flash v10k, enter i cwm wipe data, wipe cache partition, wipe dalvik cache, find aokp zip on my sdcard, ABORTED STATUS 7, again i wipe data, reboot and stuck on lg logo. I want to reflash, pull out battery, try to enter in emergency mode, but i cant:crying: please help, how to fix my l7? I hope that this is not hard brick
sorry for my english
Have this problem too
toske81 said:
Hi to all, i am stuck on lg logo, i can not enter in cwm, i can not enter in emergency mod on my l7 ( pull the VOL+ button, put the USB kabel in the PC and nothing). I do this: i am on v20d rooted, cwm, and i wanted to try AOKP, i flash v10k, enter i cwm wipe data, wipe cache partition, wipe dalvik cache, find aokp zip on my sdcard, ABORTED STATUS 7, again i wipe data, reboot and stuck on lg logo. I want to reflash, pull out battery, try to enter in emergency mode, but i cant:crying: please help, how to fix my l7? I hope that this is not hard brick
sorry for my english
Click to expand...
Click to collapse
I have this problem too! I tried the cyanogenmod rom, but now i'm staring at the cyanogenmod-logo....
I also tried getting into recovery or emergency mode, but the phone just refuses to jump into recovery.
you guys got the status 7 error because you didnt install the official cwm recovery from the rom manager app
caiejay said:
you guys got the status 7 error because you didnt install the official cwm recovery from the rom manager app
Click to expand...
Click to collapse
I googled "status 7 error", but i didn't get that message. I installed the zip-file from CWM and that went "right", then i rebooted the phone and then i got stuck. Hard reset (power, volume down, home) doesn't work....just goes back in normal reboot.
Oh and i have installed the latest recovery from the ROM manager app.
I made one mistake btw, forgot to factory reset and wipe data
robhaans said:
I googled "status 7 error", but i didn't get that message. I installed the zip-file from CWM and that went "right", then i rebooted the phone and then i got stuck. Hard reset (power, volume down, home) doesn't work....just goes back in normal reboot.
Oh and i have installed the latest recovery from the ROM manager app.
I made one mistake btw, forgot to factory reset and wipe data
Click to expand...
Click to collapse
where you found zip-file from CWM, how you install that?
toske81 said:
Hi to all, i am stuck on lg logo, i can not enter in cwm, i can not enter in emergency mod on my l7 ( pull the VOL+ button, put the USB kabel in the PC and nothing). I do this: i am on v20d rooted, cwm, and i wanted to try AOKP, i flash v10k, enter i cwm wipe data, wipe cache partition, wipe dalvik cache, find aokp zip on my sdcard, ABORTED STATUS 7, again i wipe data, reboot and stuck on lg logo. I want to reflash, pull out battery, try to enter in emergency mode, but i cant:crying: please help, how to fix my l7? I hope that this is not hard brick
sorry for my english
Click to expand...
Click to collapse
You need hard reset, try this several times and it will work http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven. http://hugefiles.net/mu8ta9a11mm8
Crazygrouzin said:
You need hard reset, try this several times and it will work http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven. http://hugefiles.net/mu8ta9a11mm8
Click to expand...
Click to collapse
thanks, man, but i cant do hard reset.I've tried many times but nothing happens, LED on the bottom dont lights up:crying::crying:
and file that you give me i cant save on my pc root, says I need permission to save on c. i know i'm a noob and i probably boring you but I'm desperate and do not know how to revive ma l7.
toske81 said:
thanks, man, but i cant do hard reset.I've tried many times but nothing happens, LED on the bottom dont lights up:crying::crying:
and file that you give me i cant save on my pc root, says I need permission to save on c. i know i'm a noob and i probably boring you but I'm desperate and do not know how to revive ma l7.
Click to expand...
Click to collapse
This is the only 2 ways to save your phone, Try many time hard reset, If not then pull out the battery and conect to pc, then hold power and volume up button together, When u unbrick it i will show u how to unzim the file
Edit. Also try this http://www.youtube.com/watch?v=71hsaa9bsf4
Crazygrouzin said:
This is the only 2 ways to save your phone, Try many time hard reset, If not then pull out the battery and conect to pc, then hold power and volume up button together, When u unbrick it i will show u how to unzim the file
Click to expand...
Click to collapse
i do this:
Press vol-and then press the Power button when the light turns on at the bottom of the screen, click on the right side and continue to hold. Now when the phone vibrated not let go of the Power button but continue to keep the vol-and right-hand side. you get the picture and then android will be reset. is now ready.
and i am i cwm v6.0.2.8, and i wipe data and i have error mounting /sdcard/.android_secure! skipping format....data wipe complete. i reboot and i stuck on lg logo
toske81 said:
i do this:
Press vol-and then press the Power button when the light turns on at the bottom of the screen, click on the right side and continue to hold. Now when the phone vibrated not let go of the Power button but continue to keep the vol-and right-hand side. you get the picture and then android will be reset. is now ready.
and i am i cwm v6.0.2.8, and i wipe data and i have error mounting /sdcard/.android_secure! skipping format....data wipe complete. i reboot and i stuck on lg logo
Click to expand...
Click to collapse
Do like in first video or like in this video, it must be one of 2 http://www.youtube.com/watch?v=WA8mXvloUXw
This is the corect way for hard reset
Edit. Take out your sd card when will do this, just in case
i tried both ways and i enter in cwm!!! why?
toske81 said:
i tried both ways and i enter in cwm!!! why?
Click to expand...
Click to collapse
You are in cwm? Strange, but its ok, so, wipe data, then wipe cache, then go in advance, wipe dalvick cache and the fix permisions. then reboot, and tell me what hapens
Edit. And if u finally unbrick it then u have 2 ways to install oficial cwm, first way is to instal rom manager from playstore and second way is to open your pc like adminastor and ectract the zip file i gave u in c/ ( i did it by this way)
toske81 said:
where you found zip-file from CWM, how you install that?
Click to expand...
Click to collapse
First one came with a kdz- file, when i rooted the phone. Dont know the exact location.
On the rooted phone i installed rom manager and there i installed a new recovery.
Btw, now when i hard reboot i only get the LG logo
Edit: now i get CM-logo again.
But i can only hard reset if i press power, volume and menubutton (physical). I tried to do the same as the vids here, several times. But no success.
Crazygrouzin said:
You are in cwm? Strange, but its ok, so, wipe data, then wipe cache, then go in advance, wipe dalvick cache and the fix permisions. then reboot, and tell me what hapens
Edit. And if u finally unbrick it then u have 2 ways to install oficial cwm, first way is to instal rom manager from playstore and second way is to open your pc like adminastor and ectract the zip file i gave u in c/ ( i did it by this way)
Click to expand...
Click to collapse
ok.thenks.i try tonght, i must go to work
robhaans said:
First one came with a kdz- file, when i rooted the phone. Dont know the exact location.
On the rooted phone i installed rom manager and there i installed a new recovery.
Btw, now when i hard reboot i only get the LG logo
Edit: now i get CM-logo again.
But i can only hard reset if i press power, volume and menubutton (physical). I tried to do the same as the vids here, several times. But no success.
Click to expand...
Click to collapse
What u are trying to do? Go in cwm wipe again data, cache, dalvick cache, fix permision, and then reflash again the rom
toske81 said:
where you found zip-file from CWM, how you install that?
Click to expand...
Click to collapse
Now i remember: I installed L7 - V10K_00 | ROOT | CWM | Unlocked Bootloader | By Homero
---------- Post added at 02:31 PM ---------- Previous post was at 02:21 PM ----------
Crazygrouzin said:
You need hard reset, try this several times and it will work
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven.
How do i do the second method? I saved the file to c, then i see two exe-files, adb and fastboot. Which one? I tried the batfiles, but they say wait for device...
Click to expand...
Click to collapse
robhaans said:
Now i remember: I installed L7 - V10K_00 | ROOT | CWM | Unlocked Bootloader | By Homero
---------- Post added at 02:31 PM ---------- Previous post was at 02:21 PM ----------
Crazygrouzin said:
You need hard reset, try this several times and it will work
Edit. probably its softbrick, soo relax and u will find a way
Edit2. This is the official touch screen cwm. You will unzip it on the root of your pc ( C/ ) and do the 3 steps flash bootloader, flash recovery and reboot to recovery, it will reboot each time, and then u will not have status seven.
How do i do the second method? I saved the file to c, then i see two exe-files, adb and fastboot. Which one?
Click to expand...
Click to collapse
This is how u install official cwm with touch screen, The .bat files.
Did u unbrick your phone? Did u pass status 7 error? if yes u dont need this
Did u pass lg logo?
Click to expand...
Click to collapse
Was Itudyh
Crazygrouzin said:
robhaans said:
Now i remember: I installed L7 - V10K_00 | ROOT | CWM | Unlocked Bootloader | By Homero
---------- Post added at 02:31 PM ---------- Previous post was at 02:21 PM ----------
This is how u install official cwm with touch screen, The .bat files.
Did u unbrick your phone? Did u pass status 7 error? if yes u dont need this
Did u pass lg logo?
Click to expand...
Click to collapse
When i tried the bat files, i only had the LG logo and the laptop didnt recognize the phone. The bat files did nothing. Later i rebooted and i got to CMlogo again, but i didnt try the bat-files. But i did try the LG mobile support tool, and that program did find the phone. Unfortunately, it said it was an unsupported modell...
I will try the bat-file with the phone on CM-logo this evening.
I dont get any error-message when i reboot, just LG-logo and then CM-logo. It just spins and nothing more. I just cant get into CWM-recovery...
Thanks for thinking with me!
Click to expand...
Click to collapse
robhaans said:
Crazygrouzin said:
When i tried the bat files, i only had the LG logo and the laptop didnt recognize the phone. The bat files did nothing. Later i rebooted and i got to CMlogo again, but i didnt try the bat-files. But i did try the LG mobile support tool, and that program did find the phone. Unfortunately, it said it was an unsopported modell...
I will try the bat-file with the phone on CM-logo this evening.
I dont get any error-message when i reboot, just LG-logo and then CM-logo. It just spins and nothing more.
Thanks for thinking with me!
Click to expand...
Click to collapse
The only thing u need is to go in cwm and wipe everything, And then reflash again the rom, U dont need this, This file is for the other user. This tool is to instal cwm, but u need to wipe everything, But u can try it on lg logo, Because one user unbrick it this way, but as i said, u need to wipe everything and then reflash the rom, This happend many times with me at the beggining and i always fix it this way. I hope u will unbrick it soon
Click to expand...
Click to collapse
Crazygrouzin said:
robhaans said:
The only thing u need is to go in cwm and wipe everything, And then reflash again the rom, U dont need this, This file is for the other user. This tool is to instal cwm, but u need to wipe everything, But u can try it on lg logo, Because one user unbrick it this way, but as i said, u need to wipe everything and then reflash the rom, This happend many times with me at the beggining and i always fix it this way. I hope u will unbrick it soon
Click to expand...
Click to collapse
Problem is that no button combination gets me in recoverymode, so i cant wipe and reflash. I cant get past cyanogen-logo. Is it possible to wipe from a pc?
Click to expand...
Click to collapse

i9505 stuck on splash logo after flash/reboot

Hey guys im having troubles with my s4 ive flashed the google edition rom to my device with twrp. the rom works fine after i flash on first boot but when i try to power off the phone and turn it back on it freezes on the splash logo. i can get the phone to boot again if i wipe the dev cache in twrp but as soon as i power off the phone and reboot it freezes on the screen again.
Where should i go from here? i have downloaded the official firmware and have it ready to go.
Should i run triangle app to reset my flash counter and then flash official stock rom with odin?
jbomba said:
Hey guys im having troubles with my s4 ive flashed the google edition rom to my device with twrp. the rom works fine after i flash on first boot but when i try to power off the phone and turn it back on it freezes on the splash logo. i can get the phone to boot again if i wipe the dev cache in twrp but as soon as i power off the phone and reboot it freezes on the screen again.
Where should i go from here? i have downloaded the official firmware and have it ready to go.
Should i run triangle app to reset my flash counter and then flash official stock rom with odin?
Click to expand...
Click to collapse
U can try wipe cache / dalvik / fix permissions from recovery u have
Incase if this does not wrk just flash the Stock firmware using odin triangle away dont have to use now use TA when u wanna visit Service centre etc to make it look official
123hiten said:
U can try wipe cache / dalvik / fix permissions from recovery u have
Incase if this does not wrk just flash the Stock firmware using odin triangle away dont have to use now use TA when u wanna visit Service centre etc to make it look official
Click to expand...
Click to collapse
ok i made the rookie mistake of formating data in twrp which is probably whats causing my issues. So as i said before i have downloaded the official firmware for australia. Do i just load it under pda tab in odin and flash do i need to check any boxes or do anything differently?
thanks for your help
If you format cache, dalvik cache, system and data then you should be fine to just flash the GE Rom mate
Sent from my GT-I9505 using XDA Premium HD app
jbomba said:
ok i made the rookie mistake of formating data in twrp which is probably whats causing my issues. So as i said before i have downloaded the official firmware for australia. Do i just load it under pda tab in odin and flash do i need to check any boxes or do anything differently?
thanks for your help
Click to expand...
Click to collapse
ya correct just point the firmware to Pda connect the phone in download mode and flash do not do any thing extra in odin let it be as its and start thr flashing
jbomba said:
ok i made the rookie mistake of formating data in twrp which is probably whats causing my issues. So as i said before i have downloaded the official firmware for australia. Do i just load it under pda tab in odin and flash do i need to check any boxes or do anything differently?
thanks for your help
Click to expand...
Click to collapse
do i need to tick repartition?
Obagleyfreer said:
If you format cache, dalvik cache, system and data then you should be fine to just flash the GE Rom mate
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
yeah ive done this reflashed the rom and it fires up on forst boot but when i power device off and power it on again it freezes on the boot screen. I thing wiping the data has wiped al the folders in the root directory.
jbomba said:
yeah ive done this reflashed the rom and it fires up on forst boot but when i power device off and power it on again it freezes on the boot screen. I thing wiping the data has wiped al the folders in the root directory.
Click to expand...
Click to collapse
From the stock recovery reset and wipe cache all should be fine
---------- Post added at 11:24 AM ---------- Previous post was at 11:23 AM ----------
jbomba said:
do i need to tick repartition?
Click to expand...
Click to collapse
U should never tick re-partition if the pit file is not added u myte brick it
Thats why i said on the above post do not touch anything in odin except PDA and start
Edit
Reset the device from settings and back up and reset this will clear all ur issues
123hiten said:
From the stock recovery reset and wipe cache all should be fine
---------- Post added at 11:24 AM ---------- Previous post was at 11:23 AM ----------
U should never tick re-partition if the pit file is not added u myte brick it
Thats why i said on the above post do not touch anything in odin except PDA and start
Edit
Reset the device from settings and back up and reset this will clear all ur issues
Click to expand...
Click to collapse
just reflashed stock and it is stuck on the boot logo. booted into stock recover then reset and stuck on boot logo
jbomba said:
just reflashed stock and it is stuck on the boot logo. booted into stock recover then reset and stuck on boot logo
Click to expand...
Click to collapse
Did u wipe cache ??
jbomba said:
just reflashed stock and it is stuck on the boot logo. booted into stock recover then reset and stuck on boot logo
Click to expand...
Click to collapse
came right after trying to wipe in factory recovery thanks for your help

[Q] I9505 do not boot

I have a big problem with my new I9505.
Today I flashed new CWM 6.0.3.6 and 4.3 GE Jamal Rom. After I flashed some mods for testing.
Then I wanted to install a clean rom, I formated in CWM every point (system, data, cache, sdcard, dalvik and dont know what else).
After I flashed again 4.3, now it do not boot. Stuck at Google boot animation.
I thought it will be fixed if I flash the stock rom via Odin (only PDA with I9505XXUBMGA_I9505OXABMGA_I9505XXUBMGA_HOME.tar.md5).
But now I stuck at Samsung Boot animation.
It is possible to boot into Recovery and Download mode.
Whats happening?
I hope somebody can help me.
Big thanks.
keynex said:
I have a big problem with my new I9505.
Today I flashed new CWM 6.0.3.6 and 4.3 GE Jamal Rom. After I flashed some mods for testing.
Then I wanted to install a clean rom, I formated in CWM every point (system, data, cache, sdcard, dalvik and dont know what else).
After I flashed again 4.3, now it do not boot. Stuck at Google boot animation.
I thought it will be fixed if I flash the stock rom via Odin (only PDA with I9505XXUBMGA_I9505OXABMGA_I9505XXUBMGA_HOME.tar.md5).
But now I stuck at Samsung Boot animation.
Whats happening?
I hope somebody can help me.
Big thanks.
Click to expand...
Click to collapse
Try to get into recovery and wipe both caches and reboot. If that doesn`t work also do a data factory reset. Don`t you have a nandroid backup to fall on back too?
My nand backup is corrupt :/
keynex said:
My nand backup is corrupt :/
Click to expand...
Click to collapse
Just reflash the rom again with a full wipe and after the flash wipe both caches and reboot.
Okay I figure out my nand backup is not corrupt..
If I select backup in cwm it restore system but it cant mount data.
I think the mistake is here.. /data do not exist?
gee2012 said:
Just reflash the rom again with a full wipe and after the flash wipe both caches and reboot.
Click to expand...
Click to collapse
Flashed again with wipe.. same problem..
keynex said:
Flashed again with wipe.. same problem..
Click to expand...
Click to collapse
I would return to stock to get the phone running again. so:
1. Go to recovery and wipe the caches and do a data factory reset and format system.
2. Pull the battery and go into downloadmode
3. Flash a stock rom with Odin 3.04
4. Reboot, setup the phone and reroot.
gee2012 said:
I would return to stock to get the phone running again. so:
1. Go to recovery and wipe the caches and do a data factory reset and format system.
2. Pull the battery and go into downloadmode
3. Flash a stock rom with Odin 3.04
4. Reboot, setup the phone and reroot.
Click to expand...
Click to collapse
Have done again exactly like you said, still same problem (
keynex said:
Have done again exactly like you said, still same problem (
Click to expand...
Click to collapse
Did you factory reset after the flash of the stock rom and also wipe the cache in stock recovery?
gee2012 said:
Did you factory reset after the flash of the stock rom and wipe the cache in stock recovery?
Click to expand...
Click to collapse
Thank god, thats it. My S4 is alive.
You are my hero, thanks :laugh:
keynex said:
Thank god, thats it. My S4 is alive.
You are my hero, thanks :laugh:
Click to expand...
Click to collapse
Glad it worked out after all You don`t have to say thanks, just press thanks bro
I had exactly the same issue,except whilst i was reflashing my nandroid the phone shut down, formatted everything as one normally would using philz recovery, tried again and it failed.
Now i cannot even gain access to recovery it stays on "loading recovery" only option i suppose is to reflash stock via odin.
me too
Davies_90 said:
I had exactly the same issue,except whilst i was reflashing my nandroid the phone shut down, formatted everything as one normally would using philz recovery, tried again and it failed.
Now i cannot even gain access to recovery it stays on "loading recovery" only option i suppose is to reflash stock via odin.
Click to expand...
Click to collapse
I've also experienced this on my gpe and it seems going back to stock is the best solution for doing the factory reset. I've tried doing the factory reset with both team win recovery and cwm.
Please help! I'm freaking out, thank you in advance!
gee2012 said:
I would return to stock to get the phone running again. so:
1. Go to recovery and wipe the caches and do a data factory reset and format system.
2. Pull the battery and go into downloadmode
3. Flash a stock rom with Odin 3.04
4. Reboot, setup the phone and reroot.
Click to expand...
Click to collapse
Hi, I ran into the exact same problem doing exactly the same thing, but I cannot get into recovery to factory reset and wide cache. Do you know how to fix this problem? I get stuck at samsung boot animation screen as well while trying to flash back to stock.:crying:
Please Help!
---------- Post added at 12:20 PM ---------- Previous post was at 12:08 PM ----------
THC122 said:
Hi, I ran into the exact same problem doing exactly the same thing, but I cannot get into recovery to factory reset and wide cache. Do you know how to fix this problem? I get stuck at samsung boot animation screen as well while trying to flash back to stock.:crying:
Please Help!
Click to expand...
Click to collapse
UPDATE
I actually was able to get into the recovery at like the 10th attempt. Thank you so much for your directions! Imma hit thanks!

[Q] Help cant boot to ROM

Hi Guys i just received a OTA update from my LG g2 d802 32gb version after i download and restart to install it seems im stuck at CWM recovery and cant boot ROM after i reboot hard restart any solutions?
loong4455 said:
Hi Guys i just received a OTA update from my LG g2 d802 32gb version after i download and restart to install it seems im stuck at CWM recovery and cant boot ROM after i reboot hard restart any solutions?
Click to expand...
Click to collapse
You cant update if you have a custom recovery. If your still stuck hold the power+volume button until you see the lg logo then let go and press and hold again for factory reset. That will boot you back into CWM
Art Vanderlay said:
You cant update if you have a custom recovery. If your still stuck hold the power+volume button until you see the lg logo then let go and press and hold again for factory reset. That will boot you back into CWM
Click to expand...
Click to collapse
ive already done that but still after reboot automatically boot into recovery
Are you rooted and have you made a backup?
Art Vanderlay said:
Are you rooted and have you made a backup?
Click to expand...
Click to collapse
im rooted and i didnt make any backup now i cant enter download mode because it will enter to cwm recovery no matter wat
Try doing a full wipe in cwm and then trying download mode. If it still does'nt work then this might help you http://forum.xda-developers.com/showthread.php?t=2582142 Its a bit complex though but its a last resort.
Art Vanderlay said:
Try doing a full wipe in cwm and then trying download mode. If it still does'nt work then this might help you http://forum.xda-developers.com/showthread.php?t=2582142 Its a bit complex though but its a last resort.
Click to expand...
Click to collapse
full wipe means i format everything in the mounts and storage? BTW can i push the flashable zip file to the device and flash it through CWM?
Yes try flashing a zip if you have one.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
If not just wipe cache dalvik and try download mode
Art Vanderlay said:
Yes try flashing a zip if you have one.
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
If not just wipe cache dalvik and try download mode
Click to expand...
Click to collapse
still cannot after wipe dalvik cache ill download flex rom and push it to flash

[Q] Android device is bootlooping in clockworkmod 6.3.0

My mobile is LG L7 P700 and im stack in recovery mode, when i restart it still go to recovery mode. What i need to do ? I have tryed to flash new rom, but that doesnt helped me. Can i use my android normaly again?
K3v1n L said:
My mobile is LG L7 P700 and im stack in recovery mode, when i restart it still go to recovery mode. What i need to do ? I have tryed to flash new rom, but that doesnt helped me. Can i use my android normaly again?
Click to expand...
Click to collapse
Which recovery you have???
EDIT:
Ok, nevermind
Go here
http://forum.xda-developers.com/showthread.php?t=2791132
In attachment is cmw 6.0.4.9 for p700 download it, and flash it.
When you flash it, download rom and flash it.
Follow install instructions.
I need to write it here or not??
Paget96 said:
Which recovery you have???
EDIT:
Ok, nevermind
Go here
http://forum.xda-developers.com/showthread.php?t=2791132
In attachment is cmw 6.0.4.9 for p700 download it, and flash it.
When you flash it, download rom and flash it.
Follow install instructions.
I need to write it here or not??
Click to expand...
Click to collapse
Write instractions plz
Paget96 said:
Which recovery you have???
EDIT:
Ok, nevermind
Go here
http://forum.xda-developers.com/showthread.php?t=2791132
In attachment is cmw 6.0.4.9 for p700 download it, and flash it.
When you flash it, download rom and flash it.
Follow install instructions.
I need to write it here or not??
Click to expand...
Click to collapse
Can you write , how do install via usb ? I cant put files to memory card
K3v1n L said:
Write instractions plz
Click to expand...
Click to collapse
Flash cwm 6.0.4.9 for L7;P700
Reboot recovery
Wipe data
Wipe cache
Mount system (too necessary)
Format system
Wipe dalvik-cache
Install zip (flash system)
Wipe cache
Wipe dalvik-cache
Flash GAPPS
Wipe cache
Wipe dalvik-cache
Reboot device
Thats all, follow every step.
---------- Post added at 02:18 PM ---------- Previous post was at 02:16 PM ----------
K3v1n L said:
Can you write , how do install via usb ? I cant put files to memory card
Click to expand...
Click to collapse
Use other device to put files on SD
Use sdcard reader or Digital camera or other mobile phone.
deem that wont work for me
Paget96 said:
Flash cwm 6.0.4.9 for L7;P700
Reboot recovery
Wipe data
Wipe cache
Mount system (too necessary)
Format system
Wipe dalvik-cache
Install zip (flash system)
Wipe cache
Wipe dalvik-cache
Flash GAPPS
Wipe cache
Wipe dalvik-cache
Reboot device
Thats all, follow every step.
---------- Post added at 02:18 PM ---------- Previous post was at 02:16 PM ----------
Use other device to put files on SD
Use sdcard reader or Digital camera or other mobile phone.
Click to expand...
Click to collapse
any more suggestions ?
All installed correctly but that Recovery only come on again not the system
K3v1n L said:
any more suggestions ?
All installed correctly but that Recovery only come on again not the system
Click to expand...
Click to collapse
Did you flash 6.0.4.9 recovery??
Ok, if that all wont work, rflash your device with KDZ.
Find on youtube full tutorial, search: L7 KDZ tutorial.
K3v1n L said:
any more suggestions ?
All installed correctly but that Recovery only come on again not the system
Click to expand...
Click to collapse
its a bit strange to me that your stuck in recovery, usually if you flash recovery and it formats system (happens some times) if you make a clean install the rom should boot.
Last thing you can try is to format every thing in this order.
Go to mounts and storage.
Mount/system
Mount/data
Mount/catch
Format/system
Format/data
Format/catch
Go to advanced and whipe delvic catch
Then just follow the rest of instructions that @Paget96 said.
But yes if that doesnt work flash via kdz
Sent from my LG-P700 using XDA Free mobile app
K3v1n L said:
My mobile is LG L7 P700 and im stack in recovery mode, when i restart it still go to recovery mode. What i need to do ? I have tryed to flash new rom, but that doesnt helped me. Can i use my android normaly again?
Click to expand...
Click to collapse
It's totally strange.You mean when you reboot system from recovery, it boots back to the recovery? What rom did you actually flash?
Sent from my LG-E610 using XDA Free mobile app
Replay for you
junephel said:
It's totally strange.You mean when you reboot system from recovery, it boots back to the recovery? What rom did you actually flash?
Sent from my LG-E610 using XDA Free mobile app
Click to expand...
Click to collapse
yes exactly, i had a stock rom , and now i have a stock rom again, and its working, i used kDZ and flashed new stock rom , and suddenly my phone starts to normaly again. But when i flashed custom rom with Clockworkmod, then it was starting in recovery mode, but it all started when i just upgraded my google stuff with google play, and then phone was restarting and started in recovery mode, but why , i dont know, i backuped files and i dident lost nothing but that starting in recovery mode was strange for me to.
K3v1n L said:
yes exactly, i had a stock rom , and now i have a stock rom again, and its working, i used kDZ and flashed new stock rom , and suddenly my phone starts to normaly again. But when i flashed custom rom with Clockworkmod, then it was starting in recovery mode, but it all started when i just upgraded my google stuff with google play, and then phone was restarting and started in recovery mode, but why , i dont know, i backuped files and i dident lost nothing but that starting in recovery mode was strange for me to.
Click to expand...
Click to collapse
Well If you want to flash a custom rom again, then flash another custom rom aside from the one that caused such strange thing. Follow Paget96 flashing steps, see if the problem persists, and make sure it's for L7 p700. If you haven't tried cyanhacker v2.0 then try it.
Sent from my LG-E610 using XDA Free mobile app

Categories

Resources