Database Users

"New" HTC Magic

I recently purchased an android phone used, and it was pre-rooted.
I'm trying to get it back to stock firmware, as I hit reset data and now it won't boot. I have do the volume-down key fastboot menu and the home+power recovery options, but I have no idea howto restore it to original firmware from Rogers.
When plugging into the computer, it fails to properly install the usb drivers aswell, maybe because I cant boot the phone normally?
I'm really new at this, which is why I want to go to stock, thus I can relearn everything from scratch.
Also, on a side note, anyone know a place to get a replacement LCD screen, or a means of connecting the digitizer that has the ribbon-cable connection part of the lcd screen missing?
Cheers,
Bobbo

I would suggest you download the original rom and then load the original SW using recovery. Press "home and the start button and hold until the recovery menu comes up.
As for installing the ADB, you may not have installed the proper USB driver.....
check to see if your computer recognises the phone....
If not, you can manually install the USB driver.

Awesome, managed to finally restore the original Rogers firmware.
Now I'm getting an error when I try and launch the phone. android.process.acore stopped.
I can get text messages and wifi works, but the phone app crashed each time I try and load it. Any ideas?

frozen tablet after partial update, copied fron the wrong forum

original Post
Going Bald here. I have searched this forum and the more I am reading the more confused I am becoming.
After a partial update my Acer Iconia A 500 froze. I tried rebooting and it took me to the start up screen where the lock is and nothing. Frozen solid.
I got acer support and they told me to Hold the vol button while turning the power on for 3 seconds the turning the screen lock on off on off. I get a green robot with a yellow exclamation mark. I am guessing this is called bricked!
I purchased the Tablet at Best Buy in the USA and brought it home to Australia.
The Acer support wants me to send it in for repair and also says...quote "However, considering that your device has been flashed to the US firmware, there may be an issue with resetting the unit to Australian standards."
I have read about OTA and kernels Roms.... YIKES. Most say download the OTA for your tablet ( how do I know what one if I cant get into it)
Can some Guru here please explain in clear English what I should do. Where I should go. You guessed it total Newbie here. HELP
Thank you in advance
Answer from FLOATING FATMAN.....thank you
There are several things you can try.
First, on the right hand side of the device there's a little hole. This is a reset hole (but doesn't wipe RAM). Try pressing this. You might have to reset a couple of times. If that doesn't help, read further.
Next, the step they describe is to force a wipe of the device. But it depends which volume button you pressed. With the device in landscape mode, it needs to be the side of the rocker furthest from the power button. Hold both down, then when you get the text, release the (I think) power button only, and toggle the orientation lock a few times.
If THAT doesn't work, contact the user sc2k on these boards via PM and he may be able to help you recover your tablet.
Question. When you tried to update your ROM, was it with an official OTA? And did you use Clockworkmod? If you used CWM, did you use the custom one in the A500 section, or the one from the market. The one on the market WILL BRICK YOUR TABLET.
My answer
Tried the reset, tried the power button. To answer the question.. The update flashed up on the screen so I thought it was a normal update. ummm Clockworkmod???? I havent updated from the market. Didnt know you could.
I am totally lost and ignorant here. SC2K will you please help me.
Thank you

ClockworkMod is a recovery menu for rooted roms.If you have'nt rooted then no need to worry about that.Ok power off,hold the volume button down from the left side,turn on your tab while holding down the volume button until you see small text pop up in the top,left corner,press the volume button again to wipe the tab completely(total reset)the pin hole on the side of your tab does the same thing.If this doesnt work,turn off the tab and plug in the usb cable to the tab and connect to your computer,your computer will try to install the driver,you might have to search for the driver on the acer site,then after it installs,you should be able to access your sdcard.You will need to search for the update or fix,not sure what tool is used for acer.

Is there anymore help out there. I dont want to download anything until I know for sure exactly what Im doing. I hate this tablet!

sassybees said:
Is there anymore help out there. I dont want to download anything until I know for sure exactly what Im doing. I hate this tablet!
Click to expand...
Click to collapse
OK, let's take this a step at a time. At the very least, we should be able to get the tab functioning again for you.
First, you're going to need a new ROM. I don't know what region Australia is, but at this point I don't think is really very important, so for now I suggest you flash am international ROM. We can worry about the region later.]
Download this file: http://vache-android.com/v1/download.php?fileID=75
This file is NOT encrypted in any way. Extract the update.zip from this file.
Now, you need a microSD card. Sometimes these cars have trouble reading (this often causes the yellow exclamation point), so you might want to format it first (format it to FAT filesystem, not NTFS). If possible, do this in an Android phone.
Copy the update.zip to the card. Must be in the root of the card.
Put the card into the A500, then boot into recovery (Hold down power and volume down, the one closes to the power button in landscape). Keep BOTH of these held down until you see a few lines of text in the top left of the screen. Once that is visible, release the buttons and the device should update.
At this point you should have a working tablet with an international ROM.

i had the same problem with sassybees.
i've tried to download the file but the page is locked...

I have download the update.zip full package but i just don't know which version. I'm a malaysian. Is it need a specific version for countries? I had tried the 4.010.22_COM_GEN1 and the 4.010.40_COM_GEN1 but it seems not working cause when updating, the loading bar stops about 80% and the gear animation stop rotating. The tablet restart and freeze at the android text loading screen again.
I'm so confuse about cwm or other things.. i just need a simple steps to get back to original android system.
How can i solve this problem. My acer tab is useless if it just showing android loading text forever...

The steps really don't get any simpler than the ones I've already given...
Have you tried different SD cards? I've already mentioned these are a common point of update failure.

yeah... i had tried 2 sd card... formatted wit fat system..
just wondering which version i must use? i'm searching in the dev section and found so many version.
the link u had given is somehow locked.. how can i access it?

thelock_bp said:
yeah... i had tried 2 sd card... formatted wit fat system..
just wondering which version i must use? i'm searching in the dev section and found so many version.
the link u had given is somehow locked.. how can i access it?
Click to expand...
Click to collapse
That link works fine for me. Right click it and choose "Save As..."
As for the SD card, have you formatted it in a PC or an Android phone? Better to do the latter if you can. As for the version you need to use, what was your current ROM? There are plenty of threads in the dev section describing what the versions are...

Hi Floating Fat Man
Sorry about the delay in answering. ( Time difference).
We are having issues with the only SD card we have. ( super expensive here) We also have the Nokia N8 android phone but no where can we find how to format the SD card ( we can format the phone but not the SD card ).We managed to get it to show on the PC and we can format but to a generic format and not the FAT filesystem. I know the Nokia N8 android is a rare phone in the USA cos all the phone shops were swooning over it and saying WOW, we dont have that. So help on formatting the SD card is proving hard to come by. Do you have any suggestions. Oh we copied the file you mentioned to the root on the generic formatted SD card and again got the yellow exclamation mark which was no surprise. I know I have bricked the tablet but I will be using it as a real brick very soon as it goes out the window LOL
Acer support has suggested I send it in for repair and that may be the only option left if we cant get this SD card up and running
I thank you for your help, I certainly have learned alot so far and I have a feeling its only the tip of the iceberg.
Thanks again

Your PC should give you an option to format the card to FAT32, which is the right format. Alternatively, a link to a format tool been posted on these sections recently in one of the many threads discussing the same issues, but I don't have a link handy, sorry.

Bricked my Acer a500

Hi there,
This is my first Android tablet, and was quite impressed. I did have one problem, and that was netflix not working with the tablet. Within 5 hours of opening the box it came in, I bricked my a500. It was trying to flash the tablet with http://forum.xda-developers.com/showthread.php?t=1178773 , since other members said it worked, but I bricked my tablet. I used CWM Recovery to flash it (after rooting of course) and I think the settings made it go to a Galaxy Tab 10.1 Setting, but I didn't know that I had hit it instead of hitting back. I flash the update, and the tablet bricks. I get a LNX checksum error every time I try to boot, and I have tried installing OTA as well as other update methods, such as sc2k's thread http://forum.xda-developers.com/showthread.php?t=1129873 and http://androidforums.com/acer-iconia-tab-a500/345419-un-brick-acer-iconia-tab-a500.html . None of the above have helped, as every time I try to install any of the update.zip from a microSD card, the Android loading screen stops about a 1/4th way through and I'm left with a Yellow Warning sign. Any help would be appreciated. To be left with a bricked pad within 5 hours of receiving it is pretty depressing, and I would like to enjoy this for as long as it lasts. (I thought it would be like PSP custom firmware modding, but sadly i was wrong)

Might try this. The key is to get to a download mode and then flash.
On a droid charge for example, hold vol button down (with battery out) and then plug USB into laptop.
http://www.droidforums.net/forum/samsung-fascinate-development/88657-if-you-think-you-bricked.html

Sadly, that guide is for phones/ samsung, so I don't know what to do from there.
Maybe if I have a copy of the latest firmware, that might work. Seeing as I just got it today, it might work if I use the latest firmware (I also updated it today as well)

are you able to hold vol down and boot into cwr ?

Maybe you can find something usefull there :
http://forum.xda-developers.com/showthread.php?t=1086785&page=4

first of all I don't really understand what you did.
second, the download update.zip is for asus eeepad instead of acer iconia
if ever you have a problem with an acer iconia product, i would suggest you should use a stock acer iconia 3.1 rom.
you can find it in the dev section
also don't forget to get the zip decryption tool, you can also find it in the dev section.
then once decryption is done, extract the update.zip and put it on the external sd card (which i hope you have)
once on it put the card into the appropriate place in the acer iconia
then you hit volume+ (volume plus) and the power button until it restarts. after release the power button but keep you finger int the volume+ until you see a message that it is formatting data cache etc..
then you are back to stock ACER and you take it from there to patch.b don't even try to use any other type of ROM since you don't seem to be to experienced.

[Q] Need to restore after failed update

I just bought my A500 a couple days ago. I received a couple OTA updates but the last one froze up. After powering down my tablet and bringing it back up the touch is unresponsive.
I've found that if I unplug the power from it I am able to press the power button on and off and that seems to make the touch part work.
However, once I'm in the OS it constantly resets to a black home screen with "Android System" up in the top left corner. Next to that is an icon with a big gear and a small gear with a green belt around them.
The tablet is full stock and I can't enable USB debugging because settings always resets as soon as I get into that area.
I've tried flashing many ROMs using the Power/VOL + recovery mode but none of the ROMs work.
I am assuming that I will need an official ROM in order to actually restore the tablet.
Can anyone help me either track down a stock ROM, ie "update.zip" or help me figure out a way to restore this tablet another way?

Ok, when I plugged in my tablet just now it said USB Debugging was on.
What are my options with pushing an update to the tablet? Are there any methods that would work for me in this case?
Would I be able to root the device at this point and have more recovery options?

Same thing happened to a friend of mine. I followed the directions on this page to fix it:
http://www.androidtablets.net/forum...ding-yellow-triangle-exclamation-point-2.html
Basically you are just making it revert to a earlier version.

klaus9000 said:
Same thing happened to a friend of mine. I followed the directions on this page to fix it:
Basically you are just making it revert to a earlier version.
Click to expand...
Click to collapse
You are awesome! I've been looking and looking for an image that would work and the one at the bottom of that thread worked like a charm!
Thank you so much for your help!

This rom is not rooted correct? I need to go back to factory to return for warranty.

Help! Can't flash ROMs from Flyme OS 5.1.1 system!

So there I was, using Cloudy 3.3 on my G2 international model (d802) when I thought to myself: Why wouldn't I change the ROM. I guess I got bored of it and while in the past year I tried almost EVERY ROM (at least every 5.1 lollipop ROM and these new marshmallow ROMs) I wanted something different this time. I remembered that Flyme OS system and wanted to give it a go. I found one here on xda site, I think it was Flyme 4.1 or 4.0 or something like that but I decided to go for a ,,newer" version of the system.
I found Flyme OS on this site: http://www.flyme.cn/firmwarelist-14.html
And as you can see the entire site is in Chinese but I managed somehow and downloaded it. I had TWRP 3.0 installed and I think I know the thing or two about flashing ROMs on this device. The whole installer is AROMA based and even though it was in Chinese I managed to flash the system. And that's when I knew I f****d up. After I installed it and it booted up, I figured that I'm not really into the whole Flyme interface and wanted to revert to stock. But I couldn't!
1. I no longer have download mode, when I stick USB cable and hold volume up it shows me an animation of ,,download mode'' but then in upper left corner appears a message saying ,,boot secure error'' or something like that and then it shows me a black screen.
2. I no longer have my TWRP recovery installed.
- I can't use 3rd party apps to restart my phone into recovery because this OS is NOT rooted! And I can't even root it because there's no method for it. I tried the default rooting method for MEIZU phones which include you logging in to your Flyme account and all of a sudden ,,root permissions'' option appears in your settings - DIDN'T HAPPEN. I also tried other different methods but to no avail. It just can't be rooted.​ - Even when I turn the phone off and try to do the hard reset thing with simultaneously holding power + volume down button - it won't show me the LG's default ,,factory reset'' screen which could potentially lead me into TWRP. It just boots normally!​
So, the conclusion:
I flashed an unknown Flyme OS system for LG G2 from a Chinese site and it works decently good but when it installed - it turned my G2 completely to a MEIZU phone. I have no clue on how to revert it and PLEASE I would appreciate any help given. Before giving your opinions in the comments, do read every sentence I wrote above.
Thanks in advanced.

duff105 said:
So there I was, using Cloudy 3.3 on my G2 international model (d802) when I thought to myself: Why wouldn't I change the ROM. I guess I got bored of it and while in the past year I tried almost EVERY ROM (at least every 5.1 lollipop ROM and these new marshmallow ROMs) I wanted something different this time. I remembered that Flyme OS system and wanted to give it a go. I found one here on xda site, I think it was Flyme 4.1 or 4.0 or something like that but I decided to go for a ,,newer" version of the system.
I found Flyme OS on this site: http://www.flyme.cn/firmwarelist-14.html
And as you can see the entire site is in Chinese but I managed somehow and downloaded it. I had TWRP 3.0 installed and I think I know the thing or two about flashing ROMs on this device. The whole installer is AROMA based and even though it was in Chinese I managed to flash the system. And that's when I knew I f****d up. After I installed it and it booted up, I figured that I'm not really into the whole Flyme interface and wanted to revert to stock. But I couldn't!
1. I no longer have download mode, when I stick USB cable and hold volume up it shows me an animation of ,,download mode'' but then in upper left corner appears a message saying ,,boot secure error'' or something like that and then it shows me a black screen.
2. I no longer have my TWRP recovery installed.
- I can't use 3rd party apps to restart my phone into recovery because this OS is NOT rooted! And I can't even root it because there's no method for it. I tried the default rooting method for MEIZU phones which include you logging in to your Flyme account and all of a sudden ,,root permissions'' option appears in your settings - DIDN'T HAPPEN. I also tried other different methods but to no avail. It just can't be rooted.​ - Even when I turn the phone off and try to do the hard reset thing with simultaneously holding power + volume down button - it won't show me the LG's default ,,factory reset'' screen which could potentially lead me into TWRP. It just boots normally!​
So, the conclusion:
I flashed an unknown Flyme OS system for LG G2 from a Chinese site and it works decently good but when it installed - it turned my G2 completely to a MEIZU phone. I have no clue on how to revert it and PLEASE I would appreciate any help given. Before giving your opinions in the comments, do read every sentence I wrote above.
Thanks in advanced.
Click to expand...
Click to collapse
Bump.

C'mon guys, there has to be someone who could possibly try to help

duff105 said:
C'mon guys, there has to be someone who could possibly try to help
Click to expand...
Click to collapse
Did you tried going to recovery mode by completely shutting off your phone and then pressing volume down + power button simultaneously. If goes into recovery mode as you said you have no twrp installed. What does it shows and also what happens when you connect your phone to pc in recovery mode?.
P.S i recovered from a similar issue like you on my sprint g2

qasim799 said:
Did you tried going to recovery mode by completely shutting off your phone and then pressing volume down + power button simultaneously. If goes into recovery mode as you said you have no twrp installed. What does it shows and also what happens when you connect your phone to pc in recovery mode?.
P.S i recovered from a similar issue like you on my sprint g2
Click to expand...
Click to collapse
I tried going to recovery with my phone being completely shut down, however, it simply turns the phone on. No button combination gets me into recovery anymore. As if it simply vanished from my phone (the recovery, of course). It doesn't show the default ,,Factory data reset" option when I hold volume down + power button whilst turning the phone on. No options whatsoever. So I didn't even get the chance to connect it to the PC while in recovery, since there's no recovery installed on my phone.

duff105 said:
I tried going to recovery with my phone being completely shut down, however, it simply turns the phone on. No button combination gets me into recovery anymore. As if it simply vanished from my phone (the recovery, of course). It doesn't show the default ,,Factory data reset" option when I hold volume down + power button whilst turning the phone on. No options whatsoever. So I didn't even get the chance to connect it to the PC while in recovery, since there's no recovery installed on my phone.
Click to expand...
Click to collapse
install quick boot. and try to access to recovery. maybe it will help.
otherwise... kingroot ... if your phone is not rooted. google for autorec for your model phone. it will install the recovery again