*HELP PLEASE* Before you say use search - Epic 4G General

I have, and I found a ton of articles that are similar to what I need but in reverse. Allow me to explain, I have a Epic 4G and iTouch now I would normally use WiFi and get my internet with that but here is the problem. At my office we are not allowed to use Wifi as it is a financial institution as it would open the door up for all kinds of security issues which I understand but then we also have sh*tty cell service on this entire floor.
Here is what I am trying to do, let me know if you can help or at the very least point me in the right direction.
10MB Office Connection > ==== > Desktop + Linksys Bluetooth Dongle > ==== > Epic 4G/iTouch
You see I can teather find to a laptop and get internet on it, my issue is I want to do it in reverse I want my Epic and/or iTouch to piggy back off of the bluetooth connection from my machine.

Damn that is a really hard problem you have there.
CR1T1C4L718 said:
I have, and I found a ton of articles that are similar to what I need but in reverse. Allow me to explain, I have a Epic 4G and iTouch now I would normally use WiFi and get my internet with that but here is the problem. At my office we are not allowed to use Wifi as it is a financial institution as it would open the door up for all kinds of security issues which I understand but then we also have sh*tty cell service on this entire floor.
Here is what I am trying to do, let me know if you can help or at the very least point me in the right direction.
10MB Office Connection > ==== > Desktop + Linksys Bluetooth Dongle > ==== > Epic 4G/iTouch
You see I can teather find to a laptop and get internet on it, my issue is I want to do it in reverse I want my Epic and/or iTouch to piggy back off of the bluetooth connection from my machine.
Click to expand...
Click to collapse
Wow this is a really tough problem. Sorry I could not help. You are really restricted a guess your job wants to make sure you are really working and not messing around. I spent a hour trying to find an answer to your solution. If you could use wifi from your phone it would be an easier solution but just wifi damn that is tough.

I think you misunderstood my question, I cannot do that as I would need to install software that would allow outbound traffic (software installed on PC is a No-No) for the most part, but I can use the BlueTooth Dongle which I know allows for ICS...just unsure how to configure it.

So my question is can I use my desktop to setup ICS with Windows 7 to share my internet connection with my Epic 4G / iTouch via a bluetooth dongle....not via USB (which would require drivers) or wifi (which would require a card and drivers + software)...

well im not sure i think you can but why dont you buy a hot spot it safe you all the trouble. and its your own personal spot

He has terrible service at work. That's why.
Sent from my Samsung Legendary 4G, a Universe UTES Phone, running "two. two"

jamice4u said:
Wow this is a really tough problem. Sorry I could not help. You are really restricted a guess your job wants to make sure you are really working and not messing around. I spent a hour trying to find an answer to your solution. If you could use wifi from your phone it would be an easier solution but just wifi damn that is tough.
Click to expand...
Click to collapse
We do not have Wifi at my office...it woul dbe too easy for someone to be on a lower level floor and hack our it....its a hedge fund company so they are REALLY sensitive over money, my issue is I cannot check any emails while on the move (say in the server room, un the break room, anywhere in the office) and its more complex than that....I know your thinking "Why not just use your computer", I am not supposed to check any email other than my company email on this PC which is why I was looking for a method for connecting without using wireless (as we do not have it here) and I figured bluetooth would have been a good option. Question, are there any Modded Roms that support Ad-Hoc connections??

CR1T1C4L718 said:
We do not have Wifi at my office...it woul dbe too easy for someone to be on a lower level floor and hack our it....its a hedge fund company so they are REALLY sensitive over money, my issue is I cannot check any emails while on the move (say in the server room, un the break room, anywhere in the office) and its more complex than that....I know your thinking "Why not just use your computer", I am not supposed to check any email other than my company email on this PC which is why I was looking for a method for connecting without using wireless (as we do not have it here) and I figured bluetooth would have been a good option. Question, are there any Modded Roms that support Ad-Hoc connections??
Click to expand...
Click to collapse
Will connectify work? It turns your internet enabled pc with a wifi chip or card into a wifi access point. Unless they scan and check for wifi.
Sent from my SPH-D700 using xda premium

Sounds like you are trying to by-pass the exact security procedures they have in place to prevent protected data from being accessed inappropriately. If your phone can use bluetooth to connect to your computers internet, then anything on your phone could compromise your computer and internet connection.
I would say, either switch cell phone providers to find one that has coverage in your office, or don't surf the internet or check personal email on your companies time.

CR1T1C4L718 said:
We do not have Wifi at my office...it woul dbe too easy for someone to be on a lower level floor and hack our it....its a hedge fund company so they are REALLY sensitive over money, my issue is I cannot check any emails while on the move (say in the server room, un the break room, anywhere in the office) and its more complex than that....I know your thinking "Why not just use your computer", I am not supposed to check any email other than my company email on this PC which is why I was looking for a method for connecting without using wireless (as we do not have it here) and I figured bluetooth would have been a good option. Question, are there any Modded Roms that support Ad-Hoc connections??
Click to expand...
Click to collapse
You do realize that the data will still go through your computer, right? If you aren't allowed to pull personal data onto that computer, then you can't get the data through said computer onto another device without violating that rule.
Common sense is an ancient legend...
Sent from my SPH-D700 using XDA App

I realize that but it is not just personal email, I freelance my skill set out and there are times when I am requested and do not find out about it until after I get off of work and a few times (more times than not) the issues could have been resolved with me MSTSC'ing into end users machine to resolve the issue...

So, you don't think that the data will be transmitted over the corporate network, through the corporate proxy and firewalls and logged because you are doing the actual browsing via your phone? I think your only option is ask IT for an isolated network drop that you are allowed to use to check your personal email (and do paid consulting for other people using their resources) or give up. If you were in my company and I got wind of your attempts to bypass the IT policy by using BT dongles, or any other method you'd be asked to leave, especially doing work for your "side clients" while you should be doing the work I'm laying you for.

I am the Unix Network Systems Administrator but MY boss the CIO does not want wifi, he said if I could figure it out then as long as it is not wifi its ok....so you see my problem

CR1T1C4L718 said:
I am the Unix Network Systems Administrator but MY boss the CIO does not want wifi, he said if I could figure it out then as long as it is not wifi its ok....so you see my problem
Click to expand...
Click to collapse
Hummm the plot thickens.
Ok your the sys admin right. so why not make a VLAN open the Airave ports & plug one in to the little VLAN you just made?

CR1T1C4L718 said:
I am the Unix Network Systems Administrator but MY boss the CIO does not want wifi, he said if I could figure it out then as long as it is not wifi its ok....so you see my problem
Click to expand...
Click to collapse
Yeah, your problem is your boss gave you permission because he only understands part of the issue. Those policies are designed to protect the company from internal threats as much as external, but he only has the fairly common knowledge about wifi as one possible route to compromisation.
Regardless, personal matters should only be handled on personal time - he isn't paying you to fix anything outside of the company. What you're attempting to do by freelancing on the clock is called double dipping, and I'd bet that if you laid all your cards on the table, your boss would take issue with that aspect of it. Besides, no company would fully trust employees by gambling on the hope that they won't try to steal confidential information, given the opportunity - they realize there is always a risk of such a theft occurring, but they would never do anything to make it easier, which is exactly what such a connection would do.
You said the entire floor has poor reception - it is not unheard of for companies to insulate their property to block cell reception for security purposes... you may be honest and upstanding, but you could also be trying to circumvent security measures. We have no way of knowing, but this entire plan sounds suspect.
Sent from my SPH-D700 using XDA App

stevesprivateaccount said:
...especially doing work for your "side clients" while you should be doing the work I'm laying you for.
Click to expand...
Click to collapse
Whoa, wait a sec...what kind of job we talkin' here?

VooDooOmen said:
Whoa, wait a sec...what kind of job we talkin' here?
Click to expand...
Click to collapse
Unix Admin for a company that manages hedge fund portfolios...

styles420 said:
Yeah, your problem is your boss gave you permission because he only understands part of the issue. Those policies are designed to protect the company from internal threats as much as external, but he only has the fairly common knowledge about wifi as one possible route to compromisation.
Regardless, personal matters should only be handled on personal time - he isn't paying you to fix anything outside of the company. What you're attempting to do by freelancing on the clock is called double dipping, and I'd bet that if you laid all your cards on the table, your boss would take issue with that aspect of it. Besides, no company would fully trust employees by gambling on the hope that they won't try to steal confidential information, given the opportunity - they realize there is always a risk of such a theft occurring, but they would never do anything to make it easier, which is exactly what such a connection would do.
You said the entire floor has poor reception - it is not unheard of for companies to insulate their property to block cell reception for security purposes... you may be honest and upstanding, but you could also be trying to circumvent security measures. We have no way of knowing, but this entire plan sounds suspect.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
"double dipping" and I would say conflict of interest. This is a shame, why people always try to find a loophole to do what they want instead of what they're supposed to be doing at work.

So u want to use ur phone as the internet connection point for ur pc?
Sent from my SPH-D700 using xda premium

If thats right, then no problem. Is ur phone rooted? And how is the 4g signal on ur phone on ur floor?
Sent from my SPH-D700 using xda premium

Related

VOIP sip IS NOT YOUER friend and bill gates locks forumz!!!!!

Let me start be saying would to thank this forum for existing but some **** is just stupid.
Schapps has been the closest to making VOIP work and stay up
I believe the code just released the client just released is open I don’t believe he's done yet
I can make the broken client work but that’s easy if you take the client set up screen and place it in front you next to the installation directions of a third party vendor(I am assuming my friend Mr Bullin know s what hat means)
On a thread below I left few parts out, due to the fact that their is a US based company offering free software that they copyrighted. I don’t understand how one can assume the power of free open sourced client.
Here’s my answer on only gates would close a forum he would pay then lie.
Copyrighting a client that I believe I said works. Ok tell me how genius how dopes it work I am confused what makes it work what are the main factors should not be hard to find
Current Released Version 2.0.1 feedback
can not hear does not work well and say reg on when off very confusing explain
http://forum.xda-developers.com/showthread.php?t=299950&page=76
part 2
I did how ever fix or should I just used it as a starting point to connect.
The first 6 ROM I used was from Mfrazz very nice rom
XDA Mobile 6
It had the sip protocol tool that is now copyright worthy
I would be lying if I said it was not a ****y tool, but very simple.
So it was easy to cross reference the fields when I held it up next to a soft phone that’s is licensed ( another piece of paper that has the year and a federal stamp on it)
So the whole point is no one has actually presented a client that works like a normal piece of software and is plug_and_play per say.
Out of respect for his ability and determination I have been watching the intense process that schapps has put in and I’m sure he has a full blown solution behind it.
Now here is for the jerk offs you know guys who are quick to open that mouth. Not that my typing doesn’t piss you off apologize, but for the real idiots the talented the individuals that make one move and they know everything.
VOIP is fun the idea of free telecom fills a hacks cup and a businessman cup.
But the term it is not your friend means that there are so many variables in a conection that from a programmers stand point the equation seems to drive them deep down the rabbit whole.
Well never read manual but I do know one thing it wouldn’t be put on the front of the TODAY screen if it was rocket sience.
The fact is it its quite simple all the phone needs is an IP address then it can be a voip phone.
Well last I checked one big telco company called cellular one and another company called Panasonic teamed up with this other company Motorola and Nextel( a phone company) as we know it was formed. Well Nextel is based off of Static IP’s the concept is not new.
I was up all night working on my client and now its done here
Mind v.l1
http://support.t-mobile.com/knowbase/root/public/tm51424.htm?
Please by al means do what you do best and somebody and bring that client back to the board cause I probably will not be attending anymore of the open board sessions. Its bad enough to type but to have to here a *****es opinion about me and not flex is not easy.
part 3
I was taught one thing don't ever have an ego and be able to do it your self. That’s I got nothing crazy to say to any the confused individuals that seem to have a very passionate deep opinions.
Being able to make things is talent and 1000 revolutionary features on a state of the art phone system that no will ever use, because the beautiful minds that made it decided they would use their ideas for the end user environment is worthless.
100% of a broken client is worthless.
Helmi said something very important, taking credit for another mans work is weak, I fell the same way just like certain countries are weak.
Gates never shows his face i understand i wouldn’t either.
Logic is cool but until you make million clean or can answer this question how much cash can you fit in a standard carry on briefcase? Don’t be so quick to fire that virgin mouth cause in the real world guess they don’t give **** so appreciate my feed back I can tolerate personality
voip
What the client on the phone is for the INTRANET
( Again this the network ( a group of computers connected to work as one) inside of a infrastructure and behind a router fire wall t1) MR BULLIN
I was saying that I was surprised that it was not pre exposed but then I remember the fact that it always misfires and a telecoms nightmare cause no body physically put it into play.
(referring to a live call center with 30-100 tsr’s on the phone generating $15-$30k a day)
Can you imagine the importance of redundancy and the fact that big companies can’t afford to ever be down. So voip came and went some companies got desperate and are still trying to push a switches and charge $40k. The main Problem is support companies want the easy way out that’s why we are here.
Why doesn’t the iphone doesn’t have voip, but yet mac’s client is one of the best on the market. Cause jobs will not release anything half which means No body could see voip is very efficient very easy to use and the best way to go if you are building some thing from scratch. JUst like Americas cellular data service is free
http://forum.xda-developers.com/showthread.php?t=288844
We all have bring something to the table and just cause I cant type doesn’t mean that I cant kick a door down or 20 but this not my forum as matter fact I keep getting demoted. But I can’t complain cause its still my home and I there is one thing about the mind. If you want an answer ask. When I see some one make a wrong move I never knock it he tried or he is trying that makes 3% which is what controls the worlds wealth.
But having a “I am the **** website poll” and a fan club now that’s cute.
If you want to talk data networking and voip or how to disassemble a mda in less then 15 minutes. I am available and over qualified.
I fear if I speak anymore I might start say bullin and the moderator will demote me to a symbol like prince.
When in doubt and all else fails just look at it and the answer is usually right in front of you.
If I don’t get back to another special request it is due to the fact that I have quite a few employees to worry about.
XDA ROCKS and your better go hands than going mind trust me you want none.
I can translate aboutthemind:
He's stating that the WM6 VoIP client is full of bugs but the allure of "free" calling over VoIP has appeal to both hackers and businesses alike so we keep banging away at it. So far, he feels that Schaps is the closest to having a "functioning" native WM6 client (mine works better IMHO ).
He also stated that M$ "supposedly" released this but the WM6 platform has seen no "official" Internet calling application since none of the Operators have decided to pick up on it (due to apparent revenue issues). m$ (Gates) has been silent on the availability since the initial betas. So his point is this:
Is Internet calling even a release level feature of the WM6 ROM? Perhaps not. Perhaps we should instead be devoting our energies to other more proven technologies and building them in to our ROMs.
aboutthemind is far from an idiot; he merely communicates differently.
edit (I have to read posts many times to extract all intellectual content):
abouthtemind also states that the Internet calling app was designed for INTRANET only and believes its IP address/NAT related that causes the issues we experience trying to use it over 3G.
I personally disagree with this because my TyTN works fine with my asterisk server over 3G. What's different about my connection? Very high speed (Business class RoadRunner) server access along with very high speed phone access (AT&T pda connect plan). I use DHCP at my 3G connection and my asterisk server is configured for NAT at both ends. Using G.711, I experience millisecond drops (audio is occasionally choppy) but have both-way audio. I'm also not getting ring-back (can't hear ringing tone on my TyTN while the remote end is ringing) but I believe this is an asterisk configuration problem.
I therefore believe Internet Calling audio issues are codec related and that the one way issue is caused by congestion at our phone's virtual network card. G.711 is all that is support out of the box and, as such, does no compression. This is one of the reasons why INTRANET connections work: more bandwidth at the phone. G.729 is held out as the "holy grail" solution here, but my research indicates that current phone processors my not have enough power to use G.729. I could be wrong here in that a native processor version could exist, but I'm concentrating on GSM610 instead because there is a good compression ratio, and the codec is already optimized for the ARM V4I instruction set (which itself is pseudo-code of course).
@aboutthemind: I remain committed to solving the codec issue for the reasons above. I too want to produce an out-of-the-box solution & will release a new ROM with my fixes if I do. I say "if" not "when" because understanding codec code itself is rocket science... in the examples they actually invoke assembler to do some math processes because the C compiler optimizations aren't quite fast enough . Besides this, I'm not fully convinced that the WM6 RTC layer is fully ACM codec compliant. There may be an issue at compress/decompress time which only works with G.711 because G.711 does no compression.
Finally, why spend all this energy on WM6 Internet Calling instead of simply cooking in a more proven solution? Here:
Solution must have tight phone integration: press the green button and call or receive call
Solution must have tight contact integration
Solution must use phone earpiece not speaker and have good volume
Solution must transfer over bluetooth to car handsfree
Right now, Internet Calling, while not there for sure, actually comes closest and therefore holds the promise of working with all of the above. I believe that fixing the codec will solve points one and two. Hardware itself causes issue 3 and may only be solvable by changing phone hardware. IMO, a quick tweak should solve issue 4 and I will start working on that when I get a reliable GSM610 codec working.
Hi Sleuth,
I have to admit that I never had enough patients to read posts of aboutthemind.
However I agree with most of conclusions you have drown here. Both from aboutthemind posts and your own.
1. Idea to have VoIP client inbuilt and closely integrated with the device system is very appreciated.
2. The client, however should work with the system as you have described. It means that it should actually take over the control of the system and use the peripherals of the device together with the native phone application.
It would be great if we could make the RTC client work properly, but I am afraid, it is very difficult if possible at this stage of the RTC development.
That is way maybe starting a new project could be better solution.
This was about generals, now to back to RTC.
I am not exactly sure if the g711 codec is not capable to work properly both in WiFi and 3G/HSDPA environment. Also I believe, G729 implementation in our mobiles can be done.
I am plaing with VoIP for long time already. Talking about mobile devices, I used to have old HP with PCMCIA WiFi card installed and SJPhone working on it. It was pretty good solution for that time. Later I used Asus PDA with WiFi on board, but without phone option. I used there SJPhone and X-Pro from Counterpath. The last one was commercial product with g729 implemented. And it worked. The processor was Intel 520 MHz. This shows that it could be done. Unfortunately Counterpath has withdrawn this product from the market.
Ok. These were early implementation. There was no integration with the system, it was aimed to PPC with WiFi only and so on.
Now We have WM6 on devices with UMTS/HSDPA on board and I am sure, sooner or later VoIP will be integrated with the system.
At the moment I am usually using Ageet phone, which works perfectly, both on WiFi and 3G, specially with HSDPA. It does not have G729, but it uses GSM, G711, ILBC and Speex, I believe. The only problem with this soft is, that it is not integrated with Phone applet in the WM6. This makes impossible to place calls directly from your contact list. It can import the contact list, but then it does not recognize all does phone number formats, so you need to have them in format, which is accepted by your voip provider. There is also obvious problem with audio redirection to bluetooth headset and receiving a call using green button or headset button.
By the way, I have tested Ageet phone as well as some other commercial phones with many different VoIP providers and environments including my own commercial VoIP network based on PortaOne Switch. All those apps work perfectly with all possible networks.
This can not be said about RTC client. It works with some servers (asterix, FWD in eg.) but does not work with others (PortaOne servers in eg.).
So if we decide to work on RTC, then we should take in mind that there is not only a problem with one way audio in some configurations, but also that this client does not fully complies to SIP protocol and because of that it is cut of from servers like PortaOne, while trying to initiate the call. I have described the problem in my post in your (Shaun's) thread: http://forum.xda-developers.com/showpost.php?p=1241766&postcount=561.
On the other hand Age company is also marketing its SDK. It seems to me that this SDK is really very good, both for PC and PPC environment. The footprint of both versions of their applications is very small . You can see it specially in WM6 if you observe how little memory it takes. Unfortunately the SDK is a commercial product, but they can provide it with G729 included. The question is how to deal with such a project if it would be based on this SDK?
This are only my thoughts. If somebody is interested in taking those thoughts further on, I am open for cooperation.
We shouldn't condemn this guy out of hand. I am not sure whether English is his mother tongue/first language. If it is not then he should post up in his own language and then someone can translate.
From the Sleuth's post it seems that aboutthemind is making some very valid points; its just that the way he puts it is not that easy to decipher.
WB
Here's some bad news that confirms aboutthemind's suppositions:
I've been playing with a compilable GSM610 codec which I can insert into my Hermes WM6 RTC stack, and its looking more and more like a buggy rtcdll that's the core issue. The RTC has 3 built-in codecs. Two are known to work: g.711 alaw & ulaw. The other, g.722.1 (also called "Siren"), is a floating point codec which I haven't enabled.
Plugin ACM codecs such as gsm610.acm appear to be correctly supported from a registry standpoint. The RTC uses the "Dll" value to find the correct acm codec, and uses WaveForm parameters to negotiate. These all appear to work as advertised.
However, while my code is getting normal ACM calls and correctly encoding information using the GSM codec, the other end only hears garbled sounds. Likewise, I'm not getting any input to the decode logic and my earpiece is dead.
This could still be a huge pointer translation issue causing the output buffer to be incorrectly addressed but that is looking more and more unlikely.
It would appear that RTC 1.5.5374 isn't fully ready for prime time from a plugin codec perspective. I'm now looking more closely at rtcdll.dll....
ITMT, g.711 alaw appears to work best over 3G. If you are using asterisk or TrixBox, you can limit your mobile extension's codec negotiation to only use alaw as follows:
disallow=all
allow=alaw
Gentlemen, Mr Slueth, time to handle this voip issue
I do apologize i had have 2 major prodjects in play so considering voip is the most efficient and logical solution i am say live. I built 3 platforms with a russain and Ukraine programmers that why a patiently waited until we could get past the feminism not to disrespect anybody i can only trouble or comment if i too have experienced the same issues threw out my life.
But i am bit off a tough guy and i was raised to not say a fcking thing in a multiple lister environment unless you took into consideration recourse and ones interpretation. Translation don't talk and don't ever disrespect nobody or you would catch a beating.
Well times have changed and now doing time is like a course offered in college so you can not even smoke on earth anymore!
I must say the first time i spoke was to protect the integrity of an individual inhere from a ungrateful member. Moist important i was able to use his solution to secure my ability to resurrect any type of wizard. So i thanked him but i was more bothered by the disrespect for ones efforts by another.
Can you believe THE MUTHAFRkr actually turned on me, i couldn't understand.. I get plenty of thanks in the real world via the new times, let alone from here daily and tell u truth i have never gone public. I have given quite a few Domestic companies a whole new way to think an they actually took some **** i had for me.
Its not my looks or my level of intelligence's that gets you the label one of the best in the game today.
For me it is me, meaning i only do things one way with no ego. I beciome the end user and think like they do. That means that i have to assume that i have been misunderstood when some insults me and take full responsibility for both parties. Move on. But being that i am a communication specialist and most important a fix my company specialist. I was ia bit confused my self until i realized where this forom is out of and the fact that i never looked at all the flags that people throw so now i get.
Just like free data doesn't appeal to most of the moderators and senior members why would it like this it doesn't apply.
So don't expect to much from people that are abroad simply because its old news or doesn't excite them.
Only work people that have respect i don't need to suit here and chicken peck the keys. My language is free spoken cause im at home so the least i can do is swear. I am a bit of a phycological warrior with a few gifts. But try to mind **** over the computer after this run was proven and deemed a failure.
If i needed validation i would not be in a studio loft and drive a rental. YOu are only as good as your teachers. And the best of the best dont wear it on their chest.
But lets face it i to am in the lab on a whole other level.
I bang this out with guys if you want.
And MR sleuth with much respect to you sir. The ability to see probably not the first time being i only guess what the vendors and clients look like. My coments to schapps was for the visuals and hinted not drop code its as bad as my typing to a non programmer and a turn off. I am a true fan and have true passion let alone credential in voip. Again not into knocking some determination or work that would be my ultimate mistake if ever making any in life.
So with that i need some answers so i can go get you what you need if you see my previous posts i threw up a flag so i could solve this but i have read all the posts so and again have not wanted to disrupt the determination but saw it was gonna drive down a very long hard maybe a little road.
1 why do you need to use the gprs client on an acm environment.
2. Can we nail one type down?
We only need one to work then the idea would be to expose the path
it then be a true team effort from the various camps here and all over
3.Do you see what i see in the us regarding the fact that hot spots are also gprs and the idea is a free cell phone that is free cause of this effort not cause its the internet.
I don't know about you but i would never want to speak over the internet abut anything none business related meaning my day to day.
5. Nothing is secure fear is the best security system one can have
Finish our discussion on sip Please do mot use the vendors names i have a major personal issue with people selling free open source software and have other people produce clients for free. The whole thing keeps out of that environment. Just personal thing
But i threw together 2 asterisk systems they shuttles and i will join you i you bring me to speed meaning the clients to test or the ability.
I also had a Hermes delivered today for this fix, the phone is in 4 pieces and looks like a standard owner had buyers remorse and after he bricked it he killed it but looks like this Hermes is going to live by tomorrow.
I am a visual type of person so for instance sip was seek and destroy that was the pitch.
Voip was {Phone--------Switch(homeofiice firewallsrouters,NAT)---- -----------------------(Switch)home/offiicefirewallsrouters,NAT)---phone
SIP was assuming you did not have any thing but home configured. It was suposed to find its way home in business pitch.
I understand networking and the concepts but dont dig in with logic.
I was thinking more if i understand why you need multiple codecs and why we cant just split open the t mobile client which by the way is from blue tooth sig. A bluetoothe company with all the stk's from every vendor available. that is going broadband for those who don't know and yes you can surf the net on blue tooth.
This what i bring way out side box and i think we can do this faster if i can implement the way come up with this stuff.
the sdk is a valid concern so i would be more than happy to split apart any piece that causes a mental block my boy z in the Ukraine still are waiting for the yahoo and google checks. I will also pardon anyone who has remorse.
Most important is the connections and the resources to use for all my in house work is the usually the mother ship and she doesn't speak English and has no copy right.
I am player in this but i don't program so you will be amused by the remedial questions and nuclear answers.
But lets do this fast with no ego and i was not implying anything directly to your present work or anyone above this specific page. If you weren't all genius i would be any way. And my goal is to let that even t-mobile is not my carrier they let me see a way out and all the holes in service so this is not about the codes it about stepping back finding the manufacture that makes the phone pulling the client customizing and then giving it up for free to those that are willing to give up the sunlight for the red eyes and constant domestic issues.
I have some things that you might be able to use li really dont know cause i good but even i stopped following when you flipped ways in one session. I'm sure once you fill me in i will pick it up instantly. Hardware and risk of destruction, well that would be my pleasure.
PS i did not proof read this so ii hope it has impact
Agreed. The built in G.711 codec works well over WiFi. I'm having no issues other than battery life related which can't be solved easily... The WM6 RTC isn't really designed to run over 3G anyway. My AdapterTypes registry hack was what made it do this and that flushed out a few "undocumented features" for sure. Case in point: it doesn't detect changes in GPRS/3G availability such as when you USB connect to ActiveSync. So you have to physically stop Internet calling by choosing "never" in the Internet tab of the Phone Settings dialog, then restart it by choosing "Whenever Available" to make it connect again. It also doesn't automatically start the data connection if it is off and will instead again say "Not Available" until you manually start the data connection then perform the above stop/start routine.
This being said, having a GSM610 codec functioning would lower the bandwidth requirements considerably. I have a few more tests to make today with this codec; it may be that the algorithm itself isn't properly spec'ed to GSM610. Some quick tests will determine this. I'm a developer and I want to understand this you see
At any rate, I'd like to get my hands on a newer version of rtcdll.dll than the one that's in my Hermes ROM.
edit:
First test completed: I disabled the final encoded buffer transfer to the RTC. The rationale here being that if the same garbled sound was heard then the Wm6 RTC itself was the culprit. Instead, I heard what would be expected if the RTC was truly acting on the encoded buffer: silence. Now I have to dig more into the codec itself. The sample GSM code does a double frame encoding (each input PCM buffer is treated as two GSM610 encoded frames). I'm not sure if the WM RTC is prepared for this or not..... Heck, there may even be a transport layer issue causing the garbled sound. More research is required.
Anybody interested in playing along can do so with their own asterisk server. There's actually a Virtual appliance containing Trixbox, FreePBX and other goodies that make startup a snap. Just load the free VMWare player, point it to the fully configured virtual machine and you're up and running.
A link to this free appliance along with the vmware player itself can be found here.
The 3CX softphone that can receive direct ip calls (dial it's address using the form nn*nn*nn*nn on your Internet calling equipped HTC phone when both devices are WiFi connected to the same network) can be found here
I'm playing with my Asterisk server... But fun ends pretty fast when you realise you can't really go anywhere. I'm no genius to come out with a hack which recompiles a TRUE softphone into a dll which wraps the MS one and bypasses the ridiculous limitation of the earpiece vs speaker problem and then goes to Mars etc, etc... So I learned that I might just get another phone if I really want to enjoy VOIP on my mobile. I like my S710, would have been one of the best mobiles to enjoy VOIP (I think) but:
1) No, no, smartphones can't have the VOIP stack
2) You can try to hack it in but earpiece is only available to "modem"
3) etc.
I'm a bit disappointed must say.
Ka.
It is possible to redirect audio from multimedia speaker to earpiece for any HTC phone with Syren audio chip.
namely:
HTC Tornado
HTC Excalibur
HTC Vox
HTC StarTrek
.......
Also, we have positive resultes with many HTC Pocket PC Phones. namely:
HTC Hermes
HTC Trinity
.......
I do not understand why HTC has disabled audio redirection. HTC audio driver is capable of audio redirection from multimedia speaker to earpiece for any multimedia stream..
Sorry, I wouldn't be able to tell more regarding this issue. But the bottom line is: IT CAN BE DONE.
I guess, HTC decided to leave this option out for reason or...
kast said:
......
2) You can try to hack it in but earpiece is only available to "modem"
......
Ka.
Click to expand...
Click to collapse
By reading forums around I learned that on some phones it could be possible.
I'm not sayint it's a hardware issue (as I got no clue about hardware), on the other hand we're limited by the drivers they provide us, limited by the API we can use.
I read somewhere that it might be possible to redirect an audio stream to the earpiece when the "phone part" is actually being used. Even if it is a modem connection.
Meaning we might have the phone to instanciate a "fake call" and then redirect the audio stream to the earpiece. Meaning that... Yes, true, audio streams could be redirected to the earpiece but not very easily.
Now, faking a call or anything like this is not really something I can code in two seconds and try. Don't even know if it could be possible. So, I still hope in the one, as I said in a post above, genius to hack a DLL, put some sticky tape around, couple of API calls he's the only one to know of and send a Shuttle to Mars. I know there are many of these in this forum, luckily.
Ka.
Some interesting ACM plugin codec developments:
I now have the exact same garbled audio in both directions . However the reason it now works at all is a fundamental clue that I'm now looking into. The frames being sent to the decoder appear to be about half the size that it's designed to handle.
Specifically, the integer divide of input size \ GSMBLOCKSIZE was zero because size was < GSMBLOCKSIZE. If this size was zero, the encoder initially just exited. I changed the code so that if the division = zero and the original size was greater than zero then the divided size was now 1 instead of 0. Result was identical garbled audio in both directions.
It may actually be the "double frame" encoding/decoding logic that's dying. This GSM codec was designed for the audio ACM system and the RTC system may well be quite different....
Dr what have you done you mighht actually have to use a responder
RTC dll i would tell tomorrow however it will surface tonight i would expect it to. with all the network drops i have soembody better email a fake one.
Just tell you are aware of trixy and that i am not a fan of the model solution takes 15 mins but i am not a fan i am if it is for your house the key is to not spend any money i failed. trixy comes in all forms and Phonn lattttyy does not need any more advertising. Unless you say so, i don't say it to much trust me in fact the west coast best called me to tell me he was shocked about the revelations. In fact i have been asked to plan and design a company structure 50 times on astrik never it sfree. I am a businessman and don';t get out of bed for less than a nickel or if you ask for my help. I built a phone system with instructions simply the desire for the perfect ADD autistic solution. A+B=C no games in your face gorilla direct marketing ...............we can get into that later.
Please don't push trixy unless you have a reason and im ok with that but please mispel. Is the fact that i dealt with them as a customer inquiring blind ready to buy so my opinion is like business i have no friends and am not biast in any which way or form. Respect plays a great deal for me.
Non the less you just sped me up of why no need to answer. Please look at some of my bulll regarding a way out. All we need is a way out well this little basted showed up today and no i am armed but let please make this
http://www.hp.com/rnd/products/switches/switch2324-2312/overview.htm
Why is it not your friend because the day you plug a monitor and key board into a pbx it now becomes a computer and it doesn't say that in the manual.
this things need to be configured once walk never go back dont surf the mnet on your meal ticket or allow it too.
Business only.
Home eat off it.
Why would one want to play in this game well thats where i come in.
Here is why evryone gets a piece
1.XDA takes the left side (usa the glutens consumers right here right now).
2. I will get6 the data free thats my goal it will come
3. we have cellular for free it would motivate our off shore friends to stop looking straight and look up and see that with the right team the your everyday is worth all the money not me jeeves my rodeo is over, but i don't stand alone.
3. I think voip was invented off shore and i want to see the pie piper cause i did it in less than 5 minutes while i was peaking over seas on an analog line. My very good friend laughed and said why do have so much interest in tis idea like he has had one for ever.
Omega can handle the basic questions sleuth don't stop keep going i will be back later unless you reply but i am burried.
I have always believed that a true hack is someone that doesn't want to be pointed or controlled for mew it was just i need it right right now. And of course a man down or payroll. If i didn't kick the door down then i would be in the Microsoft forum across street. yet we all stay on windows what lovely world
To all the new people the m,ember in my name stands for my member and please follow
these rule if you may
Just understand if u asked most likely you will get an answer but why stop this it will be done in less than a month.
T-mobile well i think $5.99 is good enough for us to a least spend a little time on a full lock down
IF you want to say something it does not have to make sense. Only a robot talks before they think!!!!
Governor i take it you will come up with gold and the hermes in front of me just gave me a light no screen but a light so by morning
PS i will not be a part of turning a domestic company into a major player i will not have a board on this and this is for strictly the love of the game
The soft phone was brilliant like my title this simply a forum for Slueth powered by xda inspired by the mind of a gorilla.
Sleuth picture and generic links gets peoples attention a whole lot faster you just turned us into support know what i mean.
But besides the pda no pbx thier is no need for that. Anyone want in pm The dr up thier you want that stuff
Slueth those are the visuals i need now i keep on you with the acm **** dont get mad when i tell you about the stack
**** meaning reference not idea or client
ACM< if gfor the big boys all one solution I love it but i wrote it
see u later sir
i got $1000 says just like all software that t-mobile client is siop
look at the t-mobile version and apple no ego i you dont and do what i cant read.
The answer is out their like he said you should push a button. HEre look at this how i do it.l
http://client.hotspot.t-mobile.com/
http://client.hotspot.t-mobile.com/
I mean come on i don't need to tell you download the t-mobile client tell me what you say anything t-mobile is crackable they based of cracker land and they believe in sharing or taking the entire industry ewho cares the clinet you have may be dead but who knows
You need a way to talk to the pbx with your cell. So let give you facts thier are no parameters and 80
% is marketing i know i iwrite the pityches
So take a client 98 it does not matter if it works on cups and yarn it will easly transition
For instance i install cabs until my phones crash and let me tell the big boys cabs work on all mobile so i believe and again i don't know if you read the t mobile site like view the code tools page info mozzilaa the flag of who they are using is their and the client they donut know what they got it will be the full version no seciruity and wide open it the patches and upgrades r ember i didn't know that you could licenses software i just unplugged the dongle or key and went back to work. ALl businesss and they first $50,000 solutions had no security.
Anyone from overseas has a never mind sleuth its time to copy paste all the worlds carriers that how you do it. If t-mobile does not pick an aragant country and you will find someone that is exerting their dominance
All you guys reading fdeel free to drop a line on your carier i will hit them by night .
Just like abhove
they are giving you your answer. maybe not the way you want iot but a wy to go fast and efeciant.
then i always look at the bottom by law they have to show you thier kitty kat
T-Mobile HotSpot Security Statement
In providing this Security Statement and the Frequently Asked Questions ("FAQs") that follow, we want you to be better informed about the security limitations and features of the T-Mobile HotSpot service.
Our T-Mobile HotSpot network is based on wireless local area networks ("WLANs") that use evolving technology based on the IEEE 802.11b/g standards. WLANs, which enable "over-the-air" communications, may be subject to unauthorized interception and are not inherently secure. Additionally, a laptop computer, personal digital assistant ("PDA") or other device using wireless connections may be more vulnerable to unauthorized attempts to access data and software stored on the device. We therefore cannot guarantee the privacy of your data and communications while using the T-Mobile HotSpot service.
However, we have designed the T-Mobile HotSpot network and provide certain encryption technologies to better safeguard your wireless communications. We also support customer-provided security solutions, such as virtual private networks ("VPNs"), personal firewalls, and anti-virus software. For your protection, at all T-Mobile HotSpot locations your credit card or other payment card information, as well as any personal information that you send to us via our website when signing up for HotSpot service, is encrypted using secure socket layer ("SSL") technology which prevents unauthorized persons from reading that information. SSL technology is the standard for data encryption and server-side authentication for secure Web-based transactions (such as e-commerce). Additionally, we encrypt your user name and password each time that you submit them to access the T-Mobile HotSpot service.
We also offer an enhanced wireless security technology over our entire T-Mobile HotSpot network known as Wi-Fi Protected Access ("WPA") with 802.1x. Once you are authenticated onto the T-Mobile HotSpot network, WPA with 802.1x encrypts all of your data traffic when it is transmitted wirelessly from your Wi-Fi device to the T-Mobile-installed, Wi-Fi access points at each T-Mobile HotSpot location. This encryption technology helps protect against unauthorized interception of your data while it is transmitted "over the air", and it helps to mitigate against session hijacking (the ability for unauthorized individuals to access Wi-Fi service for free by using a customer's session).
You may take advantage of our WPA with 802.1x security enhancement when you install our new T-Mobile Connection Manager (version 1.5 or more current release) on your Wi-Fi device. Another advantage of the T-Mobile Connection Manager is that it automatically validates the T-Mobile HotSpot network when authenticating, thus ensuring that the customer is connected to a legitimate T-Mobile HotSpot network and not an unintended third-party Wi-Fi network.
The new T-Mobile Connection Manager is available for download at http://client.hotspot.t-mobile.com, or, if you prefer, you may obtain it in CD format at no charge from many of our retail stores and participating HotSpot locations. You can confirm that the WPA with 802.1x software is functioning by looking for the "1X" on your Connection Manager user interface. Should you have any problem
If you choose not to use the T-Mobile Connection Manager, you may use compatible WPA with 802.1x software designed by other companies. However, proper configuration of such third-party software is necessary in order for the solution to work and to mitigate against security vulnerabilities. T-Mobile does not support and cannot guarantee the functionality of third-party WPA with 802.1x software.
Please note, however, that WPA with 802.1x does not protect your data when it is transmitted over the Internet. Once you connect to the Internet, it is your responsibility to use appropriate encryption technologies such as a VPN or to use websites that offer SSL technology. We do not provide protection for any Internet communications. You should be especially careful when transmitting user names, passwords, credit card numbers, financial data and other sensitive and confidential information across the Internet without ensuring that appropriate security precautions are in place. Depending on your situation, these communications may be transmitted without encryption and may be vulnerable to unauthorized interception in the HotSpot location or on the Internet.
T-Mobile HotSpot strongly recommends you take measures to secure your Wi-Fi devices and Internet communications. We encourage and support many customer-provided security solutions, such as VPNs, personal firewalls, anti-virus software and the use of websites that provide SSL encryption for your data. It is your responsibility, however, to take these precautions and provide security measures best suited to your situation and intended use of the service. We do not currently provide these solutions and cannot guarantee or otherwise be responsible for their effectiveness.
Please note that appropriate safeguards should be used for any type of wireless technology or Internet access via any service provider. If you are interested in learning more, a few sources of additional information are: the National Infrastructure Protection Center's website at http://www.nipc.gov/publications/nipcpub/bestpract.html and CERT's website at http://www.cert.org/tech_tips/home_networks.html.
Below are some tips that can help you protect yourself when using the
T-Mobile HotSpot service or any other public Wi-Fi service to access the Internet:
Use the T-Mobile HotSpot Connection Manager software which, when installed on a laptop, automatically validates the T-Mobile HotSpot network when authenticating and encrypts "over the air" communications
If you are using a browser, verify that it is using SSL to validate the T-Mobile HotSpot network via server-side authentication
Ensure that any website to which you are transmitting sensitive personal or financial information uses SSL technology. To confirm that a website is using SSL:
Look for the "https://..." in the URL address
Look for a closed padlock (or key) icon in the bottom right-hand corner of your Internet browser as indicators you are accessing a secure site
Do not ignore security warnings from the browser
Inspect the Web site address in your browser's URL field to ensure you are communicating with the correct, secure Web site
Use VPNs and personal firewalls
Use anti-virus software and keep the software updated
Be aware that others may be able to look "over your shoulder" to see your login, credit card, or other personal information while using the service. The use of a privacy screen on your computer screen may help prevent others from seeing what is on your computer.
Properly log out of web sites by clicking log out instead of just closing your browser, or typing in a new Internet address
Avoid using web-based email or instant messaging that uses clear (unencrypted) text to send information you deem confidential
Remove or disable your wireless card if you are working offline on your computer and you are not planning to connect to the HotSpot service
get me off this limit member mky ass your lucky here i waiting to post ****
AGlossary of WLAN security acronyms
802.11b/g Industry standards designation for wireless ethernet
SSL Secure Socket Layer
PDA Personal Digital Assistant
VPN Virtual Private Network
WEP Wireline Equivalent Privacy
Wi-Fi Industry brand designation for wireless ethernet
WLAN Wireless Local Area Network
WPA Wi-Fi Protected Access.
i m out i didn't read but oi know companies now r ember they contradict hot spots with the card that goes into the laptop hot spots are wifi but also fre gprs back door read into that i cant this takes me hours to type

bypass wifi security

hi
I live in the netherlands and everywhere i go there is at least one wifi spot but the problem is that almost all of them are secured so that outsiders cant use it.is there a way to bypass that security?
thanks in advance
theres a reason why it has security on it mate, you shouldnt attempt to access a network which you have no right to access, its illegal in nearly all countries to hack into someone elses network.
but for eductional purposes all i can tell you is that it can be done by capturing iv packets and then sniffing out the network key. it can be a long process unless you use data injection, and it depends on what type of security protocol the network is running, some take around 5minutes to hack and others could take longer depending on whether a brute force attack is required.
Remember do not try and hack into someone elses network, it is illegal
and if anyones thinking how i know this, its because i have run tests on my own network to check the integrity and strengh of my security.
i use wpa with a network key composed of random letters and numbers, which means a brute force dictionary attack would be useless, so i am very safe.
Do not hack, or ask any one how to hack someone elses network on this forum mate, you might get banned.
The title of the area 'Development & Hacking' relates to the semi-legal work on the devices in question, not to totally illegal full-on network hacking/intrusion - you won't get any help here... and i'll probably get flamed for even answering you...
its kinda funny that he posted this under "Development & Hacking", i bet you hes never heard of this site before and must have been searching using the keyword "hacking" and ended up on this site.
any ways, there is a way you can bypass the security, go ask the person who owns the network, if they can let you use their internet lol
I have always wished there was a way to just send a message to the network owner, just so I could ask nicely.
Plus you have people like me who would shae there network, if it was easily separated into a secure / unsecure segment. I've thought of buying a third router in order to do this....But my generosity would be in doing it free and easy, not in spending more money and effort
Reminds me of an XKCD...
XKCD 416
Made me giggle anyway....
mattarse said:
I have always wished there was a way to just send a message to the network owner, just so I could ask nicely.
Plus you have people like me who would shae there network, if it was easily separated into a secure / unsecure segment. I've thought of buying a third router in order to do this....But my generosity would be in doing it free and easy, not in spending more money and effort
Click to expand...
Click to collapse
bt broadband has something like this, i myself am with Bethere.co.uk
but if u want internet sharing, then check this link
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=16549
its called BT FON, basically you provide other BT FON users with network access, and in return you are given access to all the other members networks if your in range.
Ok i posted some info here:http://forum.xda-developers.com/showthread.php?t=412897
get a laptop with linux + aircrack and u can get most WEP ssids in 4mins!

[Q] Wifi Help!!!!!

My Dell Venue Pro will not log onto my secured Wifi Connection. When I type in the password at hit "done" it tells me "your phone couldnt reach the wi-fi network" However, when my network is 'open' (not secured) it connects just fine. I am using an apple air port extreme. I am really confused.
Any ideas?
I doubt you are the only one. I read a comment on Engadget where someone reported a wifi problem as well.
Fear not, you are not alone. My brother has the same issue on his. We both have a Venue Pro, and a WPA secured network. My phone can connect to the network no problem, his will always fail. The only way it will work is on an unsecured connection. Not sure who to contact for support since we're on the bleeding edge here, but I think it'll be sorted shortly and hopefully easily.
Aw come on Dell and Microsoft!
WIFI problem? Unbelievable!
Arcarsenal said:
Fear not, you are not alone. My brother has the same issue on his. We both have a Venue Pro, and a WPA secured network. My phone can connect to the network no problem, his will always fail. The only way it will work is on an unsecured connection. Not sure who to contact for support since we're on the bleeding edge here, but I think it'll be sorted shortly and hopefully easily.
Click to expand...
Click to collapse
I have the same problem too on 2 Venue Pro's that I have! I tried changing my router encryption settings to WEP, WPA, WPA2, Mixed(does all 3), and none of the settings worked. The only way is with no encryption. And on top of that, there is no way to touch any wi-fi settings other then just selecting the access point and giving it a password I really hope this can be resolved via an update and its not because of a bad phone!
richlee111 said:
I have the same problem too on 2 Venue Pro's that I have! I tried changing my router encryption settings to WEP, WPA, WPA2, Mixed(does all 3), and none of the settings worked. The only way is with no encryption. And on top of that, there is no way to touch any wi-fi settings other then just selecting the access point and giving it a password I really hope this can be resolved via an update and its not because of a bad phone!
Click to expand...
Click to collapse
Do you have MAC address filtering enabled perhaps?
frustrated
No I don't have MAC filtering on my wifi network. just the normal WPA/WPA2. My wife's HD7 comes in the mail today and if she doesn't have an issue with it, I may go back to the Microsoft store here in Denver and do any exchange.
I am glad I am not the only one with issues here though. I will try calling Dell or the Microsoft store and see if they can offer any help
From reading various posts on other sites, it seems that it's definitely an issue with the DVP in general - everyone seems to be reporting that it won't connect to an secure network, only an open one. How Dell have managed to drop the ball this badly is beyond me. I've been waiting for this phone since it was announced, but with the lack of info, seeming lack of SD card slot now, and wifi that doesn't work to boot, I'm seriously thinking I'll just go for a different phone!
dacunto said:
No I don't have MAC filtering on my wifi network. just the normal WPA/WPA2. My wife's HD7 comes in the mail today and if she doesn't have an issue with it, I may go back to the Microsoft store here in Denver and do any exchange.
I am glad I am not the only one with issues here though. I will try calling Dell or the Microsoft store and see if they can offer any help
Click to expand...
Click to collapse
I'd be very surprised if the HD7 has any issues, got one for my wife at the weekend, and it took all of about a minute to get it up and running on my wireless network with WPA2 (and about 45 seconds of that was disabling mac address filtering to add it, and then re-enabling the filter!!).
rob_p said:
I'd be very surprised if the HD7 has any issues, got one for my wife at the weekend, and it took all of about a minute to get it up and running on my wireless network with WPA2 (and about 45 seconds of that was disabling mac address filtering to add it, and then re-enabling the filter!!).
Click to expand...
Click to collapse
Damn, well looks like I am going to the HD7 unless I am offered a fix by Dell/Microsoft. I excused the 8GB memory because I have a larger zune and i hoped someone braver than I would take off some of the screws behind the batter cover and find a SD card slot (like the HD7). But i cant tolerate Wifi problems (cant leave my network unsecured).
Looks like I am heading to the Microsoft store after the UPS man comes with my wifes phone and doing an exchange for the HD7.
It's a real shame. Don't get me wrong, all new phones will haev teething problems, but the initial reports of the Dell really aren't good - a phone like this HAS to be spot on in terms of connectivity, that's the whole point of it. Otherwise they should call it a dumbphone.
yep and I am noticing some cracking in the speaker, like its blown or something. Shame, i really was excited for this phone
Guess they wont be ditching their blackberry's as soon as they thought if their employees cant get on their network.
If some of you do go back to the Microsoft store, please tell me how well your exchange goes. My feeling is that since there are so few Venue Pros out there it might be hard to make an exchange at this time...
I'm hoping that since this phone will get all the support it needs since it's going to be widely adopted by business users.
Hi,
ive had similair issues to this running on android in the past. The way around it for me was using one of these conversion tools like so:
corecoding.com/utilities/wep2hex.php (cant link as the forums wont allow it)
whilst thats for WEP and you said you were using WPA i assume theres a similair conversion tool of some sorts? Not saying its going to work by any means - just that my android phone needed the passphrase converting and entering in HEX in the past so may be worth researching before claiming wifi is totally broke on the dell
Carl.
carlb007 said:
Hi,
ive had similair issues to this running on android in the past. The way around it for me was using one of these conversion tools like so:
corecoding.com/utilities/wep2hex.php (cant link as the forums wont allow it)
whilst thats for WEP and you said you were using WPA i assume theres a similair conversion tool of some sorts? Not saying its going to work by any means - just that my android phone needed the passphrase converting and entering in HEX in the past so may be worth researching before claiming wifi is totally broke on the dell
Carl.
Click to expand...
Click to collapse
Thanks for the help, but the fact remains, we (I) shouldn't have to do any of these steps to fix the wifi. It should "just work"
Dell not helpful
I called Dell customer service and they couldnt help my at all. I had to explain to three difference reps what a Venue Pro was
Next step is the Microsoft store. I will update when I done there.........cant go till UPS comes to my house though.
Shame to hear about the lack of Dell support. Maybe they'll know a bit more when they starting selling it themselves.
nope, no mac filtering. it should be pretty clean.
Sent from my T-Mobile G2 using XDA App
Hopefully it's just a bad batch. Wifi and a crackly speaker would mean a no go for me as well. I really dont want the HD7, though.
I was planning to just use WP7 as a toy and stuff (until it matured more) at home and work with Wifi only. So it's possible I could just buy a Focus for that.

Mobile AP

Don't know if this is new or not, but I cant recall seeing it before, but when you open the Mobile AP tethering app, it says something about contacting At&t to sign up for a special plan in order to use it?
What is THAT all about? It's been working for me since I first installed a 2.2 rom over a month ago and this evening for some reason, my PS3 and my computer both lost connection. I go to the Mobile AP app which has been powering both devices and I see this At&t crap and now my connection to both no longer works?!?!
Anyone with insight on this?
Are you on AT&T...?
-bZj
The same thing was happening to people who were using tethering apps from the market.
I'm just gonna take a stab in the dark on this one. My understanding is that the only way a carrier can tell if your tethering is based on watching your http:// activity. In other words, are you browsing mobile sites or full sites. I think the only people they'd even look for are heavy users.
Probably what happened is that they realized (through traffic) that you were hitting up http:// and assume your tethering. The only thing you could probably do is to call them and tell them you aren't tethering. Do you get the message if you use something like the SkyFire Browser to go to say the full blown facebook website?
KWKSLVR said:
The same thing was happening to people who were using tethering apps from the market.
I'm just gonna take a stab in the dark on this one. My understanding is that the only way a carrier can tell if your tethering is based on watching your http:// activity. In other words, are you browsing mobile sites or full sites. I think the only people they'd even look for are heavy users.
Probably what happened is that they realized (through traffic) that you were hitting up http:// and assume your tethering. The only thing you could probably do is to call them and tell them you aren't tethering. Do you get the message if you use something like the SkyFire Browser to go to say the full blown facebook website?
Click to expand...
Click to collapse
They can actually tell packet by packet if it originated as a phone packet or a tethered data packet. When tethered the phone acts as a modem and it identifies the traffic as modem traffic. They are designed to hit different APNs and the header of the packets themselves are by design dead giveaways. It is rudimentary networking for them to route or track this traffic differently. This said they usually don't bother to worry about it much unless they see abuse from a particular account.
I would bet this is a glitch and is not intentional. It will be interesting to see how this develops.
down8 said:
Are you on AT&T...?
-bZj
Click to expand...
Click to collapse
I suppose it would make sense to me if I was on AT&T, but I'm on T-mobile lol.
That's the confusing part!
T mobile has been blocking people lately as well...
Sent from my SGH-T959 using XDA App
Had it during the onyx/obsidian era of roms... never had an issue actually using the mobile ap. I think it was just the rip of the settings app from samsung. It's gone on nero, and I wouldn't worry about it.
Had those issues on the 2.1 custom ROMs. Since Nero, no disconnects whatsoever. Be it wired or wireless tether.
T313C0mun1s7 said:
They can actually tell packet by packet if it originated as a phone packet or a tethered data packet. When tethered the phone acts as a modem and it identifies the traffic as modem traffic. They are designed to hit different APNs and the header of the packets themselves are by design dead giveaways. It is rudimentary networking for them to route or track this traffic differently. This said they usually don't bother to worry about it much unless they see abuse from a particular account.
I would bet this is a glitch and is not intentional. It will be interesting to see how this develops.
Click to expand...
Click to collapse
That's what my non-technical brain was trying to say. A buddy of mine explained it to me the exact same way but added that running a script to look at http traffic might be easier than sniffing packets? And most likely a carrier probably wouldn't go looking for it in accounts that aren't being bandwidth hogs. (Although he's an IT Network Guru and not a cell expert and admittedly made some assumptions). Thanks for the info.
I tether seldomly (I have a MiFi for work) but a couple of months back I tethered through the Vibrant one Saturday and streamed over 6 gigs of video from ESPN360. I never heard a peep out of them (I'm usually right around a gig/month).
KWKSLVR said:
That's what my non-technical brain was trying to say. A buddy of mine explained it to me the exact same way but added that running a script to look at http traffic might be easier than sniffing packets? And most likely a carrier probably wouldn't go looking for it in accounts that aren't being bandwidth hogs. (Although he's an IT Network Guru and not a cell expert and admittedly made some assumptions). Thanks for the info.
I tether seldomly (I have a MiFi for work) but a couple of months back I tethered through the Vibrant one Saturday and streamed over 6 gigs of video from ESPN360. I never heard a peep out of them (I'm usually right around a gig/month).
Click to expand...
Click to collapse
In networking we have what we call the 7 Layer OSI model. Layer 1 is the physical media, Layer 2 is hardware such as the MAC address, At layer three you get into IP and routing, all the way up to Layer 7 which is application and you can actually filter based on the program being run, for example you can deny any traffic to or from uTorrent.
In enterprise networking Layer 7 gear is now quite common. I am not sure what level T-mobile is using in their switching equipment, but I do know that telling if the traffic is phone or modem is all the way down at the hardware layer. So no packet sniffing would be required. All they need to do is set a policy in the equipment and it will get enforced automatically. Doing it on a customer by customer basis is slightly more complicated as it has to involve the billing system. The billing system is where they are going to control all the non-global settings. This is why they let non-abusers go. Technically stopping you is trivial, but it is not the network admins making the decision, so it becomes part of the can of worms that is politics, policy, and customer service.
Well now that's one hell of an explanation!
KWKSLVR said:
Well now that's one hell of an explanation!
Click to expand...
Click to collapse
Thank you. As a Tech I am very well versed in networking and computers with a lot of specific experience in Stand Alone Wireless & Wireless as a service provider, Fiber-to-the-home, Voice over IP, multi-scope/multi-tenant office building as phone and Internet provider, and I even did the worlds first (un-offical) VoIP over Wireless in a production environment. The reason I have had the fun and fortune of getting to do these types of projects though is because I really shine in being able to make the really technical stuff that causes most peoples eyes to gloss over actually make sense to non-technical laypersons. Also, I do it without giving wrong or too overly simplified information.
I think everyone at some level likes to know how stuff really works, they just don't want to have to learn and entirely new paradigm to do it.
Well all is well again. Mobile AP is working fine. Don't know what happened yesterday, but it's all good now.
Thanks for the replies.
what is nero
what is Nero are you talking about the burning software or somthing different?
pjbbigbear44 said:
what is Nero are you talking about the burning software or somthing different?
Click to expand...
Click to collapse
Head over to the Vibrant Android Development section. Nero is just one of many Vibrant ROMs. Check them out.
They're looking at the HTTP "USER AGENT" string folks.
It APPEARS that they're only doing it on "newer" accounts and/or data options. Thus far. Incidentally, if they start doing it on those of us with legacy data plans (e.g. "Total Internet") they're going to lose those customers, as we were explicitly sold those plans with the understanding and explicit support of tethering that they built into the devices they sold through "Internet Sharing" (e.g. on the MDA, etc.) Same with "Loyalty Android" that many of us converted to before Tethering became "an option".
It's cool to change the rules for later signups and users, but a serious problem if they try to impose it on people who have been customers for a long time under the previous understanding. And most of us, myself included, are off-contract.
I don't abuse it but if they do it to me I'll be gone in literal minutes.
Genesis3 said:
They're looking at the HTTP "USER AGENT" string folks.
Click to expand...
Click to collapse
I'd be interested to find this out definitively. They could check USER_AGENT and they can definitely see if multiple devices are nat'd behind the phone. But I don't know of anything they can use to see if just ONE device is behind a nat'd gateway aside from checking USER_AGENT and making an educated guess.
Wonder if we can get iptables to mangle the HTTP_USER agent or something to that effect.
There are ways around the user agent check (with the proper browser), but they may cause your computer to display web sites in a "mobile" format.
My cable modem went down for a couple of days and while I waited for the cable company to come out I used my Mobile AP. I've been using it on and off during some of my many travels either by using the Mobile AP or by using one of the other apps that someone made.
I have never been charged more for using it and have only been warned of the throttling, which actually never happened. If there was any slow down I would just jump down to 2.75G and go from there.

HTC1 and Media Link - Tethering Required!

I'm having a WTF moment.
Got my preorder One last Thursday and have been having trouble getting it to connect to the Media Link HD dongle.
First, it seems to connect and pass through image to the TV but I get a message saying something like "be sure the TV is properly configured". Then, I get other messages saying that WiFi Hotspot needs to be enabled and to go to the AT&T website, or dial 611.
After over a half hour with a service rep, I was told that the Media Link requires a WiFi hotspot, which in turn requires that Tethering be provisioned on the account... for another $20 per month for a 5gig plan. Suffice to say I told the supervisor I was eventually passed along to that the practice of incentivizing customers to preorder and stay with the company by offering a free dongle only to be trapped into spending more money every month to use it is a tactic worthy of Tony Soprano.
The part that confuses the hell out of me is that if the Media Link and phone both connect through my WiFi router, why would Tethering/Hotspot to connect to the AT&T data network even be necessary?
So, anyone else have this problem and a workaround?
BillTheCat said:
I'm having a WTF moment.
Got my preorder One last Thursday and have been having trouble getting it to connect to the Media Link HD dongle.
First, it seems to connect and pass through image to the TV but I get a message saying something like "be sure the TV is properly configured". Then, I get other messages saying that WiFi Hotspot needs to be enabled and to go to the AT&T website, or dial 611.
After over a half hour with a service rep, I was told that the Media Link requires a WiFi hotspot, which in turn requires that Tethering be provisioned on the account... for another $20 per month for a 5gig plan. Suffice to say I told the supervisor I was eventually passed along to that the practice of incentivizing customers to preorder and stay with the company by offering a free dongle only to be trapped into spending more money every month to use it is a tactic worthy of Tony Soprano.
The part that confuses the hell out of me is that if the Media Link and phone both connect through my WiFi router, why would Tethering/Hotspot to connect to the AT&T data network even be necessary?
So, anyone else have this problem and a workaround?
Click to expand...
Click to collapse
i'm pretty sure there is no need for tethering. look more closely at your configuration and see if there's anything wonky going on there, first
slackercow said:
i'm pretty sure there is no need for tethering. look more closely at your configuration and see if there's anything wonky going on there, first
Click to expand...
Click to collapse
Like? Not even sure where to begin. The phone connects to my router just fine, so that's not it. This is a real head-scratcher.
Have you tried changing out of game mode? If its not that they are forcing you to use hotspot to spend more on monthly charges ergo why it was free. Or one more possibility its just a mistake in the software and they will fix it in a future update. I'm glad I don't have att. I hope for the best you don't have to use your own data, just to use the media link
Sent from my SGH-T769 using xda app-developers app
5odead said:
Have you tried changing out of game mode?
Click to expand...
Click to collapse
Whoa. Game mode? What's that?
Sent from my HTC One using Tapatalk 2
Not sure I don't have the phone yet. But that's what some other guy said he did to be able to see something on a TV. He did use a mhl cable though. So I don't know for sure if that will apply to you.
Sent from my SGH-T769 using xda app-developers app
No, you definitely do not need tethering / hotspot on your account. I use the Media Link HD with my One (AT&T version) without any issues and I don't have tethering on my account.
Make sure the firmware on your MediaLink is up to date and both it and your One are correctly connected to your WiFi hotspot. Also, be aware that any complex security settings on your hotspot could give you trouble.
Sent from my HTC One using xda app-developers app
The firmware version of my adapter is 5.19.103.1 with no unusual settings on my router, which is an older Liksys - the blue one with the dual antennas.
The dongle recognizes my network name and my One connects for a second until a dialog on the phone reports that hotspot is required and to go to the AT&T website or call 611.
I have never applied "unusual" settings in the router other than naming the network, broadcasting SSID and applying WEP.
Any help is appreciated.
Sent from my HTC One using Tapatalk 2
I have tethering on my plan but I did notice that the flash wouldn't work while it was connected to my MediaLink. It gave an error message saying that flash isn't supported while hotspot is enabled.
would also like to know how to get around this hotspot error.. I've tried different security settings on my wireless router; what I haven't tried is using NO security to see if that helps. will try this now and update post!
edit: even no security on my wireless router doesn't change anything.. hrmm
born_fisherman said:
edit: even no security on my wireless router doesn't change anything.. hrmm
Click to expand...
Click to collapse
Yeah, this is getting wierder by the moment.
Likewise I tried disabling security on the router with no results.
I just installed a tethering app which requires root (suggesting to me that it works around any block at&t put on the ROM), started the link and it disabled tethering in favor of WiFi.
Looks like one of us is going to be on the phone with AT&T and/or HTC this week. I already have about 45 minutes invested with an appointment for Wednesday to discuss the tethering issue. Where I'm concerned, how I use my monthly bandwidth allotment is my business and they have no right to dictate limits to what I pay for within the confines of my plan.
Sent from my HTC One using Tapatalk 2
BillTheCat said:
Yeah, this is getting wierder by the moment.
Likewise I tried disabling security on the router with no results.
I just installed a tethering app which requires root (suggesting to me that it works around any block at&t put on the ROM), started the link and it disabled tethering in favor of WiFi.
Looks like one of us is going to be on the phone with AT&T and/or HTC this week. I already have about 45 minutes invested with an appointment for Wednesday to discuss the tethering issue. Where I'm concerned, how I use my monthly bandwidth allotment is my business and they have no right to dictate limits to what I pay for within the confines of my plan.
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Have you tried putting the phone in airplane mode and then just turning on WiFi? I wonder if its just because the Media Link sees the hotspot on the device as an option, even though it isn't enabled or activated.
born_fisherman said:
Have you tried putting the phone in airplane mode and then just turning on WiFi? I wonder if its just because the Media Link sees the hotspot on the device as an option, even though it isn't enabled or activated.
Click to expand...
Click to collapse
Have the same issue, and putting the phone in airplane enables me to connect it with my tv but only for about 20 seconds. After that, the phone will
tell me that there's something wrong with usb tethering setup thus kills the connection. So technically, connecting the media link with the phone
triggers tethering on the phone, either usb or mobile data which are somehow blocked by atnt.
With regards to gaming mode, it's a mode on my tv that draws in extra frames to smooth things out, only it had a hard time working mostly lag.
As for the media link I doubt I'll need one, as my tv is a D8000 so runs wireless anyway.
Sent from my cm_tenderloin using Tapatalk HD
Any New news on this guys? The Media link i have is a glorified paper weight for now... As far as i am aware this only happens on the At&t one..My Bro will be getting the t-mo One tommorow if it works on his ONE I will just probably give hime the media link.. what a waste *sigh...
treyqutie said:
Any New news on this guys? The Media link i have is a glorified paper weight for now... As far as i am aware this only happens on the At&t one..My Bro will be getting the t-mo One tommorow if it works on his ONE I will just probably give hime the media link.. what a waste *sigh...
Click to expand...
Click to collapse
AT&T shot themselves in the foot ( and screwed the rest of us) by trying so desperately to charge us for tethering.
Assuming we are SOL on this unless using a custom rom?
Sent from my HTC One using xda premium
born_fisherman said:
Assuming we are SOL on this unless using a custom rom?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Pretty much for the moment. I tried flashing M7's ROM and it worked fine. Seems AT&T has blocked the WAP/Tethering function in either the kernel, radio, or the ROM. So, the solution would seem to be:
1) Find a ROM you can live with and flash it.
2) Find a Kernel (or radio, if that's what it is) that works with the stock AT&T ROM and flash it.
3) Wait for AT&T to get their heads out of their asses to realize that they're screwing their customers who have peripherals like the Media Link which connect via WAP and fix it in an OTA update.
Rumor has it that there's a 1.29 update out there somewhere. Let's see what happens. In the meantime, those of us who are in this boat should call AT&T's technical support and give them an earful for pushing disfunctional equipment on us. There's plenty of advertising hype from both AT&T and HTC about how cool the phone is, but nothing in the advertising literature that says how they crippled the phone.
I'm in the same boat here. There is another thread about this:
http://forum.xda-developers.com/showthread.php?t=2242737
If I can't figure out a router configuration that fixes it, I may experiment with "rooting" and then trying to kill the com.htc.tetheringguard app. I'd definately rather have it work through my wireless router like it should, but not if I've got to leave the network open/unsecured!
miked4 said:
I may experiment with "rooting" and then trying to kill the com.htc.tetheringguard app. I'd definately rather have it work through my wireless router like it should, but not if I've got to leave the network open/unsecured!
Click to expand...
Click to collapse
I am rooted, froze that app (along with all the other AT&T bloatware) with Titanium and it still doesn't work - no link action, no tethering, either.
Frankly, I'm pissed. I understand why they inhibit tethering, especially for those of us who are on unlimited data plans. There are always guys that will abuse it. But this phone came that way from the factory, which means that even those who are on 2G plans are screwed. In either case, if I'm paying for data, it's up to me to decide how fast I want to use it, the same way as if I were to pay for a tank of gas in my car, it's not up to Exxon to tell me I can't drive on the highway.
I was supposed to have received a call back today from the AT&T supervisor to discuss options, but (surprise!) no call. Looks like I'll be having a word or two with them tomorrow - and I have half a mind to demand a full credit on the purchase price of the phone for the amount of time I've spent jerking around with them about this.

Categories

Resources