I am using W7 64bit pro. I can install Kies with no problems, but when I connect the phone (sgs II) I get an error message that The driver did not install correctly. Of course I cannot connect to Kies, thoug I can browse the internal and external card content. No advice worked, tryed to reinstall, use virtual XP 32b, etc...
It works on my desktop 32b but I cannot read the phone numbers, but I need it on my laptop which is running W7 64b pro. Any ideas?
Install Drivers
Open kies and then in the menu bar on top of kies select tools and install drivers.
Tryed this. Does not work.
If the above does not work for you try this.
Run Kies as administrator.
When installing Kies did you follow the instructions to the letter?
Reason I ask Im running Win 7 64 and have no issues with KIES.
Go to Samsung.com and download the Kies from there to your PC.
Uninstall the current one from PC along with any drivers reboot PC.
Now install new KIES without fone connected and follow the instructions.
WHen asked to connect fone do so and not before.
Kies requires motherboard USB port and does not like Laptops .
jje
JJEgan said:
Kies requires motherboard USB port and does not like Laptops .
jje
Click to expand...
Click to collapse
Does not like laptops? Works fine on all the laptops/ netbooks that we use and thats a mixture of brands at that.
Does not like laptops in that a majority of Kies not working posts are for Laptops .
Works on my x64 laptop .
jje
Nyssa1104 said:
Does not like laptops? Works fine on all the laptops/ netbooks that we use and thats a mixture of brands at that.
Click to expand...
Click to collapse
Agreed....
But Kies is rubbish anyway, just aquaint yourself with Odin and use that my friend
JD
Sent from my Samsung Galactic Superstar S II
JJEgan said:
Kies requires motherboard USB port and does not like Laptops .
jje
Click to expand...
Click to collapse
Rubbish, running on my win 7 pro 64bit toshiba lappy.
i guess this is not about flashing, so odin wouldn't help much, especially, since odin needs the working drivers as well.
i read somewhere on here, that the driver installation fails, if there is an external sd card inserted in the sgs2, when first connected (afterwards, there will be no problem on this point).
i agree with the others on other points though, kies really sucks to some extend. the only good feature i used, was media syncing. but for syncing of any kind (not only music and photos, but also savegames and other data) i use microsoft synctoy now, with the galaxy connected in mass storage mode. flashing with odin and syncing with 3rd party apps really makes kies redundant.
Chef_Tony said:
i guess this is not about flashing, so odin wouldn't help much, especially, since odin needs the working drivers as well.
i read somewhere on here, that the driver installation fails, if there is an external sd card inserted in the sgs2, when first connected (afterwards, there will be no problem on this point).
i agree with the others on other points though, kies really sucks to some extend. the only good feature i used, was media syncing. but for syncing of any kind (not only music and photos, but also savegames and other data) i use microsoft synctoy now, with the galaxy connected in mass storage mode. flashing with odin and syncing with 3rd party apps really makes kies redundant.
Click to expand...
Click to collapse
Tried to disconnect the SD card, I receive the same error: "SAMSUNG Mobile USB Modem Failed". Tried to reinstall drivers from Kies tools, of course did not work. Ran out of ideas.
Install the drivers manually from the Kies' "escape" folder. Use the Windows Device manager.
Already done this. DOES NOT WORK.
Do you have any others accessories connected to usb, like mobile broadband? I've got similar problem and when I've uninstalled drivers and disconnected modem everything started to work again
Sent from my GT-I9100 using XDA App
have you tinkered between usb debugging on and off
Read somehwere the first time you you use kies...have kies running, put phone off usb debugging. then plug it in
I had same problem with my desktop. i went into device manager. there should be an explanation mark next to phone. uninstall driver then reinstall telling it to get driver from the web. then start up kies. ps make sure kies isnt running when u install. hope this works took alit of messing around for it to work for me but eventually did.
I have W7 with 64 bit and fortunatelly KIes works on mine. I live in US and I downloaded Kies from Samsung UK site just in case because the phone was bought from Expansys and is coming also from UK. Maybe try to check on this solution. Also I vaguely believe that I had to disable firewall or Eset during the installation, but I may be wrong on this. That sucks that yours doesn't work. Wish you luck...
I am running Windows 7 in 64bit and everything works perfectly. Except I dont like Kies and used it only once.... to check what its all about.
I do not remember the installation process, but usually hardware must not be plugged in until the driver is actually installed. So just uninstall everything, install it again and THEN when everything is done plug in the phone. It should be then be recognized and working.
However if you want it just to put music on it or copy files in general, better ditch Kies and make your device be recognized by your computer like an USB-Drive.
Go to Settings > Applications > Development (Translated it from German, might be off)
There you check the USB-Debugging option and have no need for Kies anymore.
What USB port are you using? Experience from the cappy forum and personal experience shows that using a USB port right off the MB is best. Not sure if it's a power problem or what. My cappy would always charge and be hit/miss on recognization using the front USB port on my computer. Using a rear port produces connection everytime. I'm on a cappy right now, just waiting for the US release date to get GS II.
None ot the above worked. Giving up. Tx anyway.
Related
Team,
For those of you having trouble finding drivers here are some links.
64bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32bit:
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
For Linux and Mac the Android SDK drivers should work fine.
I don't know if it is a conflict with my AV or something else, but when I use the x86 drivers linked, my phone will shut off completely when attaching with "PC Internet" option in the USB settings.
http://forum.xda-developers.com/showthread.php?t=731989
they have been on there for some time now
designgears said:
http://forum.xda-developers.com/showthread.php?t=731989
they have been on there for some time now
Click to expand...
Click to collapse
yes they have... This feels redundant. also add in that if you're a nub just install kies and it will auto dl the correct drivers you need.
systoxity said:
yes they have... This feels redundant. also add in that if you're a nub just install kies and it will auto dl the correct drivers you need.
Click to expand...
Click to collapse
Also on a mac you do not need the sdk. You do need to be in debugging mode though.
Also, you could just go to the Captivate webpage on Samsung's site and get the Captivate drivers, not the generic Galaxy S drivers linked in the OP.
thanks was looking for these!
In Windows 7 I'm not having an easy time getting the phone to be recognized. If I click Start > Devices and Printers it shows up as Samsung_Android but even Kies won't recognize the phone so something is wrong. I also can no longer mount my external SD card and have it show up in Windows. I tried to uninstall all the drivers and reinstall but it keeps telling me there are already drivers installed...soo..... *shrugs*
iamcombat said:
In Windows 7 I'm not having an easy time getting the phone to be recognized. If I click Start > Devices and Printers it shows up as Samsung_Android but even Kies won't recognize the phone so something is wrong. I also can no longer mount my external SD card and have it show up in Windows. I tried to uninstall all the drivers and reinstall but it keeps telling me there are already drivers installed...soo..... *shrugs*
Click to expand...
Click to collapse
I had this problem on my desktop as well. I was using a front USB port on my computer and when I plugged it into one of the back ports, it worked. I also found the USB cable that came with the phone to work better than a cable I had lying around. Try different ports and if all else fails, try a different cable.
So here's something bizarre. I've been using my PC (Win 7 64bit) for weeks now with my Captivate and no issues. Had originally had woes when I got it, but it started working. Anyway, today I plug it in and ... it doesn't recognize it. Have installed / changed NOTHING -- only M$ patches have been applied. Tried to roll back prior and get the lovely BSOD probably because I have 4 SATA Raptors RAID-0'd and M$ doesn't know how to use that, but has anyone else seen this behavior before?
And to add to this. I rebooted my phone and now it works again. Very odd but problem solved.
Sent from my SAMSUNG-SGH-I897 using XDA App
ive been trying for weeks and trying all three, generic Galaxy S, AT&T captivate drivers and Kies and can't get anything working in USB Mass storage mode or Kies mode...
This is on Windows 7 64bit. Driving me crazy. USB mode wont install the Mass storage drivers and Kies wont recognize
My issue is that when I connect the phone on Windows 7 32bit the phone and the internal SD card will connect but one I try to click on anything inside the phone or card the phone will immediately disconnect and then reconnect. When I try to click again it will repeat the disconnection. After that, I don't even have to click on the phone or card directories, it will disconnect then reconnect about 6 more times. Eventually it will be stable and not disconnect. This is extremely annoying. Anyone else with this issue.
. .
drivers from softpedia are OLD
drivers are updated!
v1.3.2250.0 (dated 8 march 2011)
download here
I am having trouble connecting my i5801 to my pc using the USB cable.
Initially when i had a 2GB micro sdcard on the phone it used to give me trouble connecting to the PC very often and it used to take me atleast 6-7 tries to establish the connection.
However since i have put the 32GB micro sdcard it absolutely refuses to connect to Kies.
The phone has no issues connecting to Kies with an sdcard, it does so within seconds.
Kies is updated and installed properly with the latest version.
Both sdcards are functioning properly without any issues (well, apart from this atleast). Both are detected easily while using the memory card reader seperately.
I have tested the usb connection across 2 different computers with same issues.
android_murphy said:
I am having trouble connecting my i5801 to my pc using the USB cable.
Initially when i had a 2GB micro sdcard on the phone it used to give me trouble connecting to the PC very often and it used to take me atleast 6-7 tries to establish the connection.
However since i have put the 32GB micro sdcard it absolutely refuses to connect to Kies.
The phone has no issues connecting to Kies with an sdcard, it does so within seconds.
Kies is updated and installed properly with the latest version.
Both sdcards are functioning properly without any issues (well, apart from this atleast). Both are detected easily while using the memory card reader seperately.
I have tested the usb connection across 2 different computers with same issues.
Click to expand...
Click to collapse
i also had problems with my kies.. my phone could never be connected to kies... contacted samsung... they said me to update my windows vista... i thought it to be weird but decided to give it a try..
removed kies.. updated my vista... downloaded latest version of kies... installed.. since then there are no problems...
u too give a try... who says...!!!
I once had the same problem with an 8GB card.
Someone on this forum told me to delete the files with very long names... I did and Kies worked fine again. (I don't know the max lenght of the filenames...)
Did what you guys said, the problem still persists.
It works properly in the Mass Storage mode but not in the Kies mode.
Any more ideas?
Kies 2 beta is out, and here is the link if you wish to take the plunge:
http://www.samsunghub.com/2010/12/22/samsung-kies-2-beta-available-for-download/
ROLY5573 said:
Kies 2 beta is out, and here is the link if you wish to take the plunge:
Click to expand...
Click to collapse
It says on the link you provided that it does not support many devices. I am unable to find info on whether i5801 is supported or not. Are you using it? Is it supported?
android_murphy said:
It says on the link you provided that it does not support many devices. I am unable to find info on whether i5801 is supported or not. Are you using it? Is it supported?
Click to expand...
Click to collapse
It doesn't support i5800, so, I think it doesn't support also i5801...
like is the when install new kies,the new driver is not install,old driver not have unstall..
you need to unstall the samsung driver first ,then install new kies with new samsung driver
Kies works properly on my 5801.. I had to update my windows..i think the version of dotnet framework is important...
Sent from my GT-I5801 usin0g XDA App
Solved It!
After a few days of breaking my head over my phone finally managed to solve the problem.
Whenever i connect the usb to the phone there is an option that comes up in the notification bar asking me to "Mount" the phone. So before clicking on the connect via Samsung Kies option i had to scroll down down the notification bar, click on Mount and only after doing that, when i click on Samsung Kies, it connects easily. Doesn't work in the reverse order. And the mount option is not a popup just sits their silently in the notification bar.
Anyway thanx for all who tried to help. My question is why it doesn't mount it automatically?
Kies 2 is now out of beta!
The new Kies 2 is out. I have tried it and it works fine on Windows 7 32-bit. The SD card still needs to be unmounted, though. Here is the link:
http://www.samsunghub.com/2011/01/06/kies-2-moves-out-of-beta/
No driver issues! Looks very much like a step in the right direction.
So does it now detect i5800/1?
thaaaaank you
Kies 2 is now out of beta!
TekkenLaw said:
So does it now detect i5800/1?
Click to expand...
Click to collapse
As far as I can tell, kies 2 does not have any driver problems. I have installed it on XP and Windows 7 32-bit. It uninstalls the old Kies and during installation, installs new drivers.
Anyway to manually get the drivers for it? I can't find them and I can't sync my device to my computer. Windows Mobile Device Center won't work at all, it doesn't recognize my HD2 and it says the driver installation fails.
Can someone help me out please? Thanks
Windows Mobile Device Centre was all I never needed on my win7 x64. I installed the program before inserting the HD2 though. Obviously make sure you have the program up and running before plugging in the HD2 and selecting activesync on it; It should load up. You could uninstall the driver (from device manager) and start again if all else fails.
What if it does not?
Started doing that "cant recognize" issue while installing NAND (at the radio installation process -r: 2.15., compatible)
Figured to go to stock WinMo with SDCard, but it still cant..
Faster data sync disabled, after that it tried to install the drivers again, but says it fails...
Gotta go to ms and install the updated win mob dev c. The one that ships needs updating.
Also, once you are into the android side of things you should open wmdc, connection settings, and turn off allow usb connections, and install the android usb drivers.
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
thekillingroad said:
Thanks mate, but done everything, I mean everything. Now I'm totally stock, original SPL and original WWE ROM, everythings working like a charm, besides connecting to a PC. Also tried with another computer (XP) and another cable. I can say I've done everything I found on the net, but nothing helps. Uninstalling driver, uninstalling HTC Sync etc etc etc... It just cant recognize the USB..
Click to expand...
Click to collapse
Replace your USB Cable and Thats ALL !
i had the same problem....i am for now using windowx xp
aks777 said:
i had the same problem....i am for now using windowx xp
Click to expand...
Click to collapse
I have been using it win 7 64 bit since the beginning. and I never have a problem with the driver.
Try redownload and reinstall Windows Mobile Device Center from Microsoft website.
Only connect your device after the driver has been properly installed.
in device manager delete usb controller after software installation.
Thanks to ALL, but changing the USB cable, so sure that's ALL? =)
I'm not gonna mention that I've written that I've tried it with many computers and many cables. =)
The phone is sent to HTC and they told me that they ordered a new mainboard.
Hope doesn't take too much time. My Service Provider gave me a Galaxy 7500.. Cupcake, no market.. arrrgh!
Thinking of buying an iPhone and selling it after two weeks but that's gonna cost me $200 loss in two weeks. too much =)
As doing some thinking.. the device cannot "introduce" itself to the computer. I couldn't find a more sense making answer.
If you've tried hard-resetting, cable and PC changing, if it's still not working, then there should be a problem about the phone, mostly about the mainboard.
I suggest anyone having that problem go make your phone check at a service, of course if you have warranty. =)
Hello,
recently I bought an i5800 (android 2.1-update 1), because I wanted to have rooted phone, I read informations about this on couple sites.
I decided to use z4root.
Now when I connecting my phon to the PC kies shows only Phone+Contacts.
Doesent show any data on the SD, and also doesn't show any informations about version of firmware...
How can I fix this?
Best Regards
v
PS: I also installed Link2SD, AppsToSD and Titanium Backup
update to latest version of kies and also un-install the USB drivers from device manager -> disconnect phone and connect it to other USB port open kies and the driver should install again hope this can fix your problem
Nope, that doesn't work either
Kies updated to 2.0.0.11032_12...
On the phone USB Debug mode disabled, USB Options-> ~Ask after connection.
Kies still does not sees properly the phone, and phone does not shows the window with options Kies,~media player, ~mass storage.....
I had exactly the same (infuriating) problem.
I fixed mine by uninstalling Kies, uninstalling the USB drivers then installing java (I know this shouldn't make a difference, but it seemed to).
I was using Windows 7 64 bit.
I found the Samsung_USB_drivers_for_mobile_phones.exe file & saved this to my desktop (before uninstalling).
I think Kies saves it to program files x86/samsung/kies/usb drivers/
Then after uninstall of everything, then installing java,
right click on the driver and run as an administrator.
When it asks where to install it, place it in the /program files/samsung/kies/usb drivers/ folder (not the x86 version, install it to the normal one).
Then find the Kies install file and right click that & install as an administrator to, but let Kies install this to the x86 program files location (default).
Then when it's completely installed (skip finding media, you can do that later), turn off the phone, then connect it to the USB cable.
Then turn the phone ON and let the drivers install as normal.
Just let it do it's thing and after a while, after all installations are complete, Kies will show your phone & will let you see all the folders, not just the contacts list & will show you the firmware version and everything.
Hope this helps.
I made sure I 'ran as administrator' on both install files.
Not sure which bit helped, but it worked for me (and I've tried everything, believe me)
*EDIT*
google "Why does Samsung Kies not detect my Samsung mobile phone" for the same info
**EDIT** x2
on looking in my /progam files x86/samsung/kis/usb drivers folder, it sems that Kies has reapplied the driver there & removed it from the 64 bit program files path. Ether way, one of the above steps fixed it, perhaps it's just that I ran everything ad an admin, who knows ?
Installation of java wouldn't make any difference, unless the installer was java based. The admin rights might have done the trick.
Sent from my GT-I5801 using XDA App
Actually, ignore my last post.
Kies now cannot see my Galaxy Apollo anymore, (even though every other program on my PC can !! including WMP12 !!)
I'm sick of this.
What's so hard about detecting a connected device ? !!
Sorry for the rant, but I'm getting really annoyed by this piece of software (Grrr !)
Yeah, I do whay you write, it's the same on my pc... now everything is .. not working
I think it's not only a Kies problem+USB drivers but also system on the phon has been changed thats why my phone is not properly working with kies.
Of course, still when I trying to connect my phone to pc I don't see on my phone screen options window that was before z4root/app2sd/link2sd - I mean Kies, media, storage
I see that there is a problem with a part of the Kies - DeviceManager is crashing after phone connecting..
Well now, the only way I can connect, is by (control panel) > uninstall programs > uninstall SAMSUNG USB drivers.
(while the phone is NOT connected).
Then launch Kies.
Then select the menu (tools > install driver)
Then wait while it installs the drivers (again !!)
After waiting for about a minute, I reconnect my GT-I5800 to my PC via the (not so universal) USB cable.
I then wait till all the (your device has been installed) messages stop.
Then I have normal Kies control of my Apollo.
But, if I disconnect it, then try to reconnect it, I get no joy.
It will sit at "connecting" forever.
The only way I can reconnect, is to rinse & repeat.
(I.E. uninstall the drivers & 'GOTO 10', which is really starting to boil my p!ss as I have no idea why this is happening).
Every single piece of poo software on my PC can see my phone, except Kies.
Does anyone have any ideas as it'd driving me mad !! :`(
try this
uninstall kies and all samsung drivers from ur pc
goto download mode (does not need root & it's safe)-(do not open odin)
a list of 3-5 drivers will get installed
then unplug the device, remove and re-insert the battery
install kies then connect ur phone by the usual way
I have the same problem with my phone. An other i5800 can connect successfully with my laptop, KIES and the same cable, but my phone doesn't.
It works...
what I've done....
Back to factory settings in the phone... so just great, the best corrective actions that I ever had :/
I want my HTC Uni back...
*edit*
Kies works 100% ok eaven now sees the update to froyo
so problem was changes that was made by one of the additional software on the phone
Thread can b closed
I also had this problem from long time. I found the reason was the Kies (both 1.5xx and 2.XX) versions are unable to use the default USB driver thats come along with Windows OS.
So the best solution is uninstall the USB driver from Windows device manager and after that install the USB driver from Kies. Then definitely your phone will be recoginized with Kies.
Note: After Uninstalling USB driver and before installing the USB driver from Kies sometimes windows itself tries to install the default USB driver so disable it when its promted.
Hope this helps....
vvviii said:
Nope, that doesn't work either
Kies updated to 2.0.0.11032_12...
On the phone USB Debug mode disabled, USB Options-> ~Ask after connection.
Kies still does not sees properly the phone, and phone does not shows the window with options Kies,~media player, ~mass storage.....
Click to expand...
Click to collapse
Install latest kies (clean install). Before connecting the phone to usb remove the SD card and start in kies. The phone would be detected and drivers would be installed. Disconnect, reinsert SD card and connect again. Problem will be solved. Worked for me.
Hi all,
Yesterday I stayed till 3 AM trying to flash the new firmware to my 9100, but KIES was so unstable that I decided to re-install.
We all know if we simply install Kies under XP, there is an issue with an Android MTP driver failing to install. No matter what you do, it won't install. This is the driver that Kies requires to work in order to sync contents and flash new firmwares.
After trying different options and settings, the solution is quite simple. Follow the steps (XP tested):
1.- Remove Kies entirely.
2.- Remove Samsung USB Drivers
3.- Reboot.
4.- Install latests .NET framework.
5.- Download and install latest Windows Media Player (ver 11 for XP). This is the key, since it installs a User mode driver framework used by Kies.
6.- Reboot
7.- Download and install latest Kies. Reboot.
6.- Plug in your phone. It will detect everything.
8.- Start Kies.
This should make it.
Hope it helps!
Cherni.
I had Rooted and Custom ROM-ed with AOSP GingerMOD.
Then when connected to PC via cable, W7 failed to install MTP driver.
Heres what worked.
Turn off USB Debugging on the phone. Reconnect via USB storage mode.
Voila!
Am not using Samsung Kies. so dont know whether it will work with the same trick.
cherni said:
5.- Download and install latest Windows Media Player (ver 11 for XP). This is the key, since it installs a User mode driver framework used by Kies.
Click to expand...
Click to collapse
What if you have XP?
ro-mann said:
What if you have XP?
Click to expand...
Click to collapse
He said version 11 for xp lol.
BTW, for those of you with windows 7 enterprise N - The "N" means no multimedia drivers, so media player would not be enough.
You need to download some 300+MB package which I don't remember the name. and then media player.
I meant W7!
Well I just tried this and it didn't work, am losing hope here...I already tried everything and nothing works
undertaker677 said:
Well I just tried this and it didn't work, am losing hope here...I already tried everything and nothing works
Click to expand...
Click to collapse
Is usb-debugging on?
Sent from my GT-I9100 using XDA App
I have tried it with or with out debugging
calexus1182 said:
Is usb-debugging on?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
All this started when I updated from version 2.3.3 to 2.3.4 through KIES
Hi, were you able to solve? I'm stuck at the same point, tried almost everything and i'm still getting the MFT driver error with my Galaxy S 2.
OS is WinXP 32bit, I tried before with Kies version 2.0.3.11082_152_2, then yesterday with 2.0.3.11082_152_4, no luck.
I tried the suggested Windows Media Player 11 procedure, i did the whole process as written in the 1st post (installed .net 4, then WMP11, then reboot, then Kies, then reboot again) and it didn't worked.
Before that i tried with USB debugging mode, i tried following what Kies says (connect device, got the error, disconnect the device then go to "tool -> the crap that should be supposed to repair drivers but that truly does nothing", then reconnect the device just to get the error again), I tried a tool i found somewhere on the internet while reading HUNDREDS of pages of users having the same error (Samsung engineers, that means that you really SUCK!) "FileSearcherforKiesFix" to find files with long extension on my SD, deleted some files (was only some thumbnails), NOPE, still getting the same F****n' error
So, were you able to solve in some way this error? How?
Thank you for your help, and sorry for my english (i'm Italian).
and if that doesn't work...try a different USB port on your computer. I have found that only one of the 4 on my t410 thinkpad plays nicely with the samsung usb drivers...
having said that, i have sworn off kies entirely and will only use Odin,
I'm on the Galaxy SII and was having similar problems. Went to the samsung website, DLed the USB driver, then to get the MTP to work: Turn off Debugging, go into "wireless and network", then into USB Utilities, unplug usb, click connect to PC, then plugged it back in, and bingo, we have a winner.
I didn't read the entire thread to see if this method was already posted, to f'ing tired!
Hopes this helps.
edit: looks like Kragusk did a similar (exactly the same?) install. So yeah, what he said....
the fix
This fix for windows XP was discovered by a chap named Dennis.
The problem is caused by some drivers from WMP11 failing to install correctly.
(WMP11 contains the MTP drivers, nothing to do with Samsung or USB drivers)
You just need to re/install them
rename C:\WINDOWS\system32\drivers\wudfrd.sys xxx_wudfrd.sys
rename C:\WINDOWS\system32\drivers\wudfpf.sys xxx_wudfpf.sys
rename C:\WINDOWS\system32\wudfhost.exe xxx_wudfhost.exe
rename C:\WINDOWS\system32\wudfsvc.dll xxx_wudfsvc.dll
rename C:\WINDOWS\system32\wudfx.dll xxx_wudfx.dll
rename C:\WINDOWS\system32\wudfplatform.dll xxx_wudfplatform.dll
rename C:\WINDOWS\system32\wudfcoinstaller.dll xxx_wudfcoinstaller.dll
Then run this file (umdf.exe) found inside the windows media player 11 install
(Hint: download then open in winrar to find the file)
Sorry as a new person I can't post a hotlink to a file.
wwwDOTmediafireDOTcomSLASH?2ak0f9n985ql00h
This not only cures Kies, but almost all other Media Player connection problems as well!
Kragusk said:
Go to Samsung Kies software, on top left of the window, click the menu > Driver recovery.
Let it reinstall drivers
After driver installation finished, go to your phone, Settings> Application > Development, tick USB debugging mode.
Under USB debugging mode connect your phone to the PC with USB.
It installs correctly!
Disconnect from PC
Untick USB debugging mode
Connect again
and it works!
Click to expand...
Click to collapse
This method really helped me. Thanks a lot man
wrong thread.....
Windows Media Player has the secret sauce! thx Cherni & pjclark1
5.- Download and install latest (ver 11 for XP). This is the key, since it installs a User mode driver framework used by Kies.
Cherni.
Worked for me, too. Didn't need to reboot.
XP sp3 captivate
I cant believe it that so many people are having this ****in problem! I will try post #1. Thanks
i tried post #1 but still doesnt work.
i tried installing a standalone Samsung USB drivers also doesnt work.
Anyone has a clue?
thank you v m~
It worked for me.
Thanks a lot.