[MOD] Modified volume config file. IT'S LOUD YO! (With left speaker balance fix now!) - Eee Pad Transformer General

Modded default file a little to my liking volume wise, this is very much a work in progress, if your Transformer burns up a speaker or the sound card, don't hold me responsible, BUT on a good note it works for me and volume is very decently increased, so if your feeling lucky (punk) give it a try. You just might be pleased with the results. Good luck and happy modding! =]
Also as a side note, I have heard stories of blown left speakers, so be extra careful with the one with the speaker fix, as this is unexplored territory except from one user who did have good result's, so only use if you are aware that it may damage your HARDWARE for good...
Confirmed working on voodoo sound, but I would suggest using the medium one, no higher.
KEEP IN MIND THIS ALSO INCREASES HEADPHONE OUTPUT, BE CAREFUL SO AS TO NOT DAMAGE YOUR HEARING!!
This file was in the same folder, however I don't understand it's function, but incase you had it and erased it, here it is:
http://www.multiupload.com/EXJZ50M6IN
Original config file: http://www.multiupload.com/MRJ2V98G3W
Risky one (full output potential):http://www.multiupload.com/7L8S4I6GKF
Medium Risk one (Recommended): http://www.multiupload.com/WVKJVU5U7A
Risky one with speaker balance mod (SOMEWHAT UNTESTED!!): http://www.multiupload.com/61HP5V3M0U
Medium risk one with left speaker fix (ALSO UNTESTED!): http://www.multiupload.com/MFI035ZL65
You must reboot for the changes to apply.
If you take it for a spin, please post your opinions on sound quality and volume so others can get a good idea of what this file does
All credit to xda members freeza and verkion for the balance fix file, I simply edited his file.
Edit: you will find the stock file in system/data
Edit: Be sure to backup your original file, and if you don't know how to replace the file, you shouldn't be playing with this lol
Edit: If you hear distortion, lower the volume, as distortion will blow speakers faster than overpowering them
Also as a side note I run the full output one with good results, full volume is now usually to loud lol, does sound *SLIGHTLY* tinny, but once you get used to it, the increase in volume is worth the trade off, and if you miss the stock volume, either turn it down or re-apply your stock file.
If you like this, please click the thanks link =]
If you have any issues feel free to contct me at my personal email at [email protected], but only if it is important please.

DREWSASTER said:
I modded the default file a little to my liking volume wise, this is very much a work in progress, if your Transformer burns up a speaker or the sound card, don't hold me responsible, I am new at this afterall, BUT on a good note it works for me and volume is decently increased, so if your feeling lucky (punk) give it a try. You just might be pleased with the results. Good luck and happy modding! =]
http://www.multiupload.com/7L8S4I6GKF
Edit: you will find the stock file in system/data
also be sure to backup your original file
Click to expand...
Click to collapse
I advise people to be very careful with volume on transformer. I blew my left speaker using configs etc and just received my transformer back from warranty repair (thankfully fixed
I really dont advise using configs like this but there is a need to make volume higher.
I have tried everything and found the safest way which is what i use now is a small app from the market called 'VOLUME+' , link below.
I set my speakers to a +5 boost in options, nothing else and volume is much higher, crisp and safe.

snakeybidder said:
I advise people to be very careful with volume on transformer. I blew my left speaker using configs etc and just received my transformer back from warranty repair (thankfully fixed
I really dont advise using configs like this but there is a need to make volume higher.
I have tried everything and found the safest way which is what i use now is a small app from the market called 'VOLUME+' , link below.
I set my speakers to a +5 boost in options, nothing else and volume is much higher, crisp and safe.
Click to expand...
Click to collapse
I agree completely, and I also tweaked a few more things so it's still crisp and good sounding, it works for me, but everyone should be advised you might not be as lucky as me also.

Wouldn't it be wise then to create a few modified files and label them according to how safe they are? (eg. Dangerous, moderate, safe) that could potentially work...
Sent from my Desire HD using XDA Premium App

Gtj94 said:
Wouldn't it be wise then to create a few modified files and label them according to how safe they are? (eg. Dangerous, moderate, safe) that could potentially work...
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
I was actually going to get around to doing that today
Edit: done, no point in anything below medium, volume wouldn't be affected enough to really notice

Using risky one with speaker balance and working beautifully, now able to hear my netflix movies alot better

I have a question this is for speakers...while for headphones its voodoo sound?
also the medium risk one download link does not exist

cowballz69 said:
Using risky one with speaker balance and working beautifully, now able to hear my netflix movies alot better
Click to expand...
Click to collapse
Awesome, any *tinny* sounds? or is it decently clear?

Imppy said:
I have a question this is for speakers...while for headphones its voodoo sound?
also the medium risk one download link does not exist
Click to expand...
Click to collapse
Link fixed, I apologize, also this will work for headphones as long as you don't run voodoo sound, if you do I'm not to sure, but without voodoo sound it also boost's headphone volume as well, and quite a bit on that note while still retaining clarity.

I fixed the balance issue with my left speaker (tweaking the config file) But there are times I am scare that the left will dead. There has been people that have blown out the left side. I ended up getting a portable speaker Monster ClarityHD (yeah I know Monster....) but the speaker is pretty good. 6 hrs on bluetooth and battery life is not that bad.

does this boost vodoo sound further? lol...any people with vodoo sound and tested?

Imppy said:
does this boost vodoo sound further? lol...any people with vodoo sound and tested?
Click to expand...
Click to collapse
To be honest I don't know as I don't use voodoo sound, but I will edit the original post if I can confirm it work's with voodoo. So if you want you can test and report back, or just wait to see if someone else doe's first.

dazz87 said:
I fixed the balance issue with my left speaker (tweaking the config file) But there are times I am scare that the left will dead. There has been people that have blown out the left side. I ended up getting a portable speaker Monster ClarityHD (yeah I know Monster....) but the speaker is pretty good. 6 hrs on bluetooth and battery life is not that bad.
Click to expand...
Click to collapse
This also boost's headphone output so it wil increase the volume of your portable speakers as well, but possibly for the worse.

will report soon just used the medium risk one with voodoo sound
no distortion sound
compatible with vodoo sound...very loud in headphones when max amplifying with vodoo sound...no distortion whatsoever...amazing sound
I don't know if I should try high risk with vodoo sound...

dazz87 said:
I fixed the balance issue with my left speaker (tweaking the config file) But there are times I am scare that the left will dead. There has been people that have blown out the left side. I ended up getting a portable speaker Monster ClarityHD (yeah I know Monster....) but the speaker is pretty good. 6 hrs on bluetooth and battery life is not that bad.
Click to expand...
Click to collapse
That was my fear in releasing the one with the left speaker fix, but the bad is the only way to know how the file will afffect it is to wait to hear from more user's on the result's they have.

by the way we have to restart the transformer before it takes effect?

Imppy said:
will report soon just used the medium risk one with voodoo sound
no distortion sound
compatible with vodoo sound...very loud in headphones when max amplifying with vodoo sound...no distortion whatsoever...amazing sound
I don't know if I should try high risk with vodoo sound...
Click to expand...
Click to collapse
If it is loud enough I would suggest sticking with that one then, why take the risk?

Imppy said:
by the way we have to restart the transformer before it takes effect?
Click to expand...
Click to collapse
Yes you must reboot in order for the changes to apply.

DREWSASTER said:
If it is loud enough I would suggest sticking with that one then, why take the risk?
Click to expand...
Click to collapse
I didn't reboot, let me do the real testing now! lol

Imppy said:
I didn't reboot, let me do the real testing now! lol
Click to expand...
Click to collapse
Ok, I also edited the original post so everyone knows to reboot, sorry I didn't clarify that, let us know how it goes with whatever file you choose.

Related

Post your best voodoo sound examples!

This might be fun...
I was pretty skeptical of what voodoo sound could do at first, but now that I have it, I am definitely convinced of the advantages provided by this little mod.
Individual instruments ring through, the mids and lows are given a lot of depth, and the highs have excellent fidelity with out being overbearing. This is by far one of the best additions to my phone.
Sooo...I was thinking we could all link what we feel best exemplifies the improvement in sound quality given to us by voodoo. That piece you can't help but play over and over again because it sounds so good now. I'll start us off
http://db.tt/eyxqOe5
(It's ska, which I think is one of the best audio tests, given the large range of sounds in any given song; and it happens to be my passion lol )
Let's keep it to one per user. And I would say don't directly attach anything, because I'm not sure if I'll get in trouble lol.
Maybe when it's all said and done we'll have a cool little xda-epic4g soundtrack. Think of it as a sociology experiment
Sent from my SPH-D700 using XDA Premium App
Whoa I thought this only existed on the vibrants... or something. Please tell me how to get it!!!
Sent from my SPH-D700 using XDA App
Whats voodoo? Software?
I keep reading about Voodoo profiles but all I can change is the volume. What am I missing?
I am not really sure how to use this either, I tried to look it up but a thread with over 100 pages is hard to find stuff,lol.
make sure you keep it legal...
Voodoo is an addon by http://twitter.com/supercurio , I'm under the impression its a set of kernel enhancements along with config/control apps you can install from market (or include in ROM). "Voodoo" is kind of his brand name. He's spent quite a bit of time improving sound qualities, but he's also messed with screen color accuracy and camera picture quality.
As for how to get it - I saw its in the most recent ACS ROM/twilight kernel. Haven't tried it, though I'm excited too.
Latest Viper ROM has voodoo baked in. FYI
Sent from my SPH-D700 using XDA App
I have it in my rom. (srf frozen 1.0.2) but don't know how to use it.tried looking it up, but too much to sift through. If anyone knows a good setting to put it on, please let me know..( I don't use head phones so I'm not sure if that is all it adjusts or not)
Thanks
Sent from my SPH-D700 using XDA App
1. How do you use it?
2. Does it only kick in when headphones are used or does the external speaker quality benefit as well?
stir fry a lot said:
1. How do you use it?
2. Does it only kick in when headphones are used or does the external speaker quality benefit as well?
Click to expand...
Click to collapse
headphones are nothing but external speakers, so yes any audio out will benefit...
there's a voodoo control app that comes with syndicate (which is what im running right now)...there are a few options in there that can be turned off (as well as a bunch of options you can enable to provide better recording quality)...but from my understanding, there are improvements that voodoo gives you that may not have an actual "option" to enable/disable. im not so sure though, as the details given in the voodoo thread are a little inconsistent with what we can see in the voodoo control app (such as the parametric equalizer)...
my guess is that the port of voodoo (which is for the international galaxy s) to the epic is still somewhat of a WIP...
all that being said, the best way to hear improvements would be to have an epic with out voodoo and one with voodoo, and hear them side by side...or another version of the galaxy s since they all probably have the same stock audio filters...
since i dont have two phones, i played the same song before and after I flashed syndicate. call it selective perception if you want, but i definitely hear an improvement.
Yeah, I'm running acs 1.0.3, I just haven't updated my signature. I just don't see any other playback options other than being able to adjust the headset volume option.

Beats Audio For Any GB ROM!

http://www.xda-developers.com/android/beats-audio-now-available-on-any-gingerbread-rom/
I Flashed The Zip! I dnt KNow If The Sound Improved! But My DSP Manager Wont Work Now !
Can Someone Try It Out Now!???
Aww. I thought this was a free pair of Beats Audio for Gingerbread users.
Darn it ... I've been waiting for this, but I'm on ICS
I would post in the original topic asking for help, but my posting privileges don't allow me yet so here it is. I tried flashing that zip using OpenRecovery on my Motorola Milestone with CM7, but I keep getting an error: Status 0 and then "Installation aborted". Can I only flash that using CWM, or is there something wrong with the files? I already renamed the zip to "update.zip" just in case.
brunofm said:
I would post in the original topic asking for help, but my posting privileges don't allow me yet so here it is. I tried flashing that zip using OpenRecovery on my Motorola Milestone with CM7, but I keep getting an error: Status 0 and then "Installation aborted". Can I only flash that using CWM, or is there something wrong with the files? I already renamed the zip to "update.zip" just in case.
Click to expand...
Click to collapse
In the original topic, someone already responded to this question: you first need to mount /system manually.
Turned off equalizer and tuning in Poweramp and listened before and after flashing this. Undoubtly a huge difference, at least I like it
Problem is its an equalizer with settings non changeable .
Does it make any difference ???
My tests 50% No 50% maybe .
But beauty is in the eye of the beholder and placebos can also work for some .
Nandroid backup install and try is all you can do as its not removable .
Further tests
Volume level is probably up by 1%.
Playback is the same as my current setup apart from a bit of distortion at the peak with louder sounds . A bit like standing next to the instrument rather than in the audience .
jje
Krizp0 said:
Turned off equalizer and tuning in Poweramp and listened before and after flashing this. Undoubtly a huge difference, at least I like it
Click to expand...
Click to collapse
+1
I can hear a difference doing the same too.
brunofm said:
I would post in the original topic asking for help, but my posting privileges don't allow me yet so here it is. I tried flashing that zip using OpenRecovery on my Motorola Milestone with CM7, but I keep getting an error: Status 0 and then "Installation aborted". Can I only flash that using CWM, or is there something wrong with the files? I already renamed the zip to "update.zip" just in case.
Click to expand...
Click to collapse
Also possible that your zip file is corrupt. Download again.
In the original thread they mentioned they tried it on CM7, MIUI and CM9, and claimed that it even works on ICS.
Maybe somebody can test? My Device is backupping right now
mehtaparth said:
http://www.xda-developers.com/android/beats-audio-now-available-on-any-gingerbread-rom/
I Flashed The Zip! I dnt KNow If The Sound Improved! But My DSP Manager Wont Work Now !
Can Someone Try It Out Now!???
Click to expand...
Click to collapse
Of course it wont work...
It's like ripping the toilet out of your bathroom and replacing it with a bucket......
It does the same job but its much less efficient and lacking basic features......
Weird, how would this make a difference? i have some knowledge with supercurio's work, hardware limitations overall prevent amazing sound. Having beats codec wouldn't make a big diff even if you have a beats headphone.
Sent from my GT-I9100 using xda premium
Holly f*ck, it works like hell with Voodoo LOUDER, Mixzing and the Eq on it and a AKG k518DJ
You don't have any icon, if you want, just check with RootExplorer "System/bin", you'll see some file like this "basimage_ibeats_isolo.bin"
So yes you can flash the zip with any GB (mine is Hyperdroid with Siyah)
---------- Post added at 05:29 PM ---------- Previous post was at 04:46 PM ----------
If you have a good Eq AND you know how to set it, you'll not have more bass!
It feel like a filter, the bass is deeper, clearer, the med also and the trebble too
-> It really makes the sound clearer
It's makes a huuuge difference with a 320 Kbps mp3 or FLAC and a real headphone and with high quality earphone, and it's even better with voodoo LOUDER wich hacking the hardware of my phone
Who said for GB only?
I flashed it before my work was over, so I was able to directly hook it up to my car stereo. I am running AOKP (ICS 4.0.3 AOSP), so I didnt expect it to work.
So, I fired up PowerAMP and played right away. It wasnt much of a difference, since the PowerAMP EQ and Tone-Filter were still active. I know how it sounds without those 2 options, since I drive alot within the week and my Phone is hooked up to my car stereo like every time.
I listen to heavy tunes, bass-focused, mainly Dubstep and DnB.
So I switched those 2 options OFF within PowerAMP and WHOMP!
I mean, really! There is a pretty significant improvement in sound quality.
It sounds better than with activated EQ and Tone-Filter from PowerAMP.
Very crisp bass, but with more force and power.
Mid-Tones are clearer when heavy bass lines kick in.
I was like "WTF"...
Then I fired up Simfy (german edition of Spotify) and even there I got a significant improvement in sound.
I am pretty surprised, since I didnt think it would work on ICS since its been promoted for Gingerbread "Only". But I can say, there is a difference, and if not, I must be high on crack or something ....
PS: I even have the imagination it increases the default Volume Levels. I usually have a pretty fixed setup while driving and listening music (Volume Levels) and I really had the feeling that it was louder in general...
As I have said earlier, I guess supercurio confirms it on his twitter.
Supercurio said:
http://forum.xda-developers.com/showthread.php?t=1523760 "the more red the better" LOL demotivator.org/photos/832/938… - When its about audio you must be prepared to anything. People ask me about Beats audio ports. 1/ I didn't tested 2/ Its violating @beatsbydre and @htc licenses: bad! 3/ if it does something, its an audio effect, not a quality improvement. 4/ big donations buttons when violating licenses.. no comment^^
Click to expand...
Click to collapse
Source:
https://twitter.com/#!/supercurio/status/175280260500299776
https://twitter.com/#!/supercurio/status/175281118352916481
https://twitter.com/#!/supercurio/status/175281540887089153
Reminds me of the SE Bravia nonsense that was floating around. This is why companies like Bose and Monster Cable make money hand-over-fist.
You're likely listening to 192 kbps (or less) MP3 files on a set of sub $20 headphones, no amount of compression/EQ can help that.
Improved the audio quality quite a bit. Specially on WIDE effect in settings. Crisp & more clear
crachel said:
Reminds me of the SE Bravia nonsense that was floating around. This is why companies like Bose and Monster Cable make money hand-over-fist.
You're likely listening to 192 kbps (or less) MP3 files on a set of sub $20 headphones, no amount of compression/EQ can help that.
Click to expand...
Click to collapse
QFT!
Sent From My Fingers To Your Face.....
Try4Ce said:
Who said for GB only?
I flashed it before my work was over, so I was able to directly hook it up to my car stereo. I am running AOKP (ICS 4.0.3 AOSP), so I didnt expect it to work.
So, I fired up PowerAMP and played right away. It wasnt much of a difference, since the PowerAMP EQ and Tone-Filter were still active. I know how it sounds without those 2 options, since I drive alot within the week and my Phone is hooked up to my car stereo like every time.
I listen to heavy tunes, bass-focused, mainly Dubstep and DnB.
So I switched those 2 options OFF within PowerAMP and WHOMP!
I mean, really! There is a pretty significant improvement in sound quality.
It sounds better than with activated EQ and Tone-Filter from PowerAMP.
Very crisp bass, but with more force and power.
Mid-Tones are clearer when heavy bass lines kick in.
I was like "WTF"...
Then I fired up Simfy (german edition of Spotify) and even there I got a significant improvement in sound.
I am pretty surprised, since I didnt think it would work on ICS since its been promoted for Gingerbread "Only". But I can say, there is a difference, and if not, I must be high on crack or something ....
PS: I even have the imagination it increases the default Volume Levels. I usually have a pretty fixed setup while driving and listening music (Volume Levels) and I really had the feeling that it was louder in general...
Click to expand...
Click to collapse
hmmm.. gonna try it on Resurrection 9.4.
crachel said:
Reminds me of the SE Bravia nonsense that was floating around. This is why companies like Bose and Monster Cable make money hand-over-fist.
You're likely listening to 192 kbps (or less) MP3 files on a set of sub $20 headphones, no amount of compression/EQ can help that.
Click to expand...
Click to collapse
Yup.. Exactly what i thought and supercurio confirmed NOT working.

VooDoo sound and Display Expert coming to the S3

Supercurio Tweeted this an last night.. good news for S3 owners. Will also be coming to the S2.
'.. release #GalaxySIII specific pre-versions of #VoodooSound and #DisplayExpert because.. it's must have already for me '
Yeah saw that too. Great news indeed
Sent from my CM9 TouchPad
What is displayexpert? I tried to google it.
I guess it will allow adjustments to the settings of the screen. Saturation, temperature, and sharpening.
Oh man, can't wait to see what supercurio is bringing to the SGS3... He did wonders for the SGS.
will it be for rooted devices only ? dont want to root my GS3 yet ive only have it 2 days
will rooting void the warranty with samsung ?
Only with root
I hope this also comes for the US GS3 !
Can't wait
rovex said:
I guess it will allow adjustments to the settings of the screen. Saturation, temperature, and sharpening.
Click to expand...
Click to collapse
It'll probably fix some banding issues with the ICS default background.
I still have my original i9000 mostly because of the amazing sound quality I get with Voodoo sound and the Samsung earphones. The Siyah 1.2.1 mods on Omega 5.1 on my i9300 kernel runs it very close. Really eager to see what SuperC can do with the new device!
joe_donkor said:
I still have my original i9000 mostly because of the amazing sound quality I get with Voodoo sound and the Samsung earphones. The Siyah 1.2.1 mods on Omega 5.1 on my i9300 kernel runs it very close. Really eager to see what SuperC can do with the new device!
Click to expand...
Click to collapse
I agree completely.. I'm really just glad to be back on Samsung period. I've been on HTC and the unlocking, s-off, adb is more of pain the just running Odin or flashing.
Sent from my ADR6425LVW using xda premium
drbveb88 said:
I agree completely.. I'm really just glad to be back on Samsung period. I've been on HTC and the unlocking, s-off, adb is more of pain the just running Odin or flashing.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Tell me about it - try using Motorola devices. Or better yet, dont. Being back on an open hardware platform with real developer support is amazing.
Sent from my GT-I9300 using xda premium
Personally really looking forward to see Voodoo Sound implemented on the SGS3 to take full advantage of the Wolfson
Always nice to have a high end phone that has excellent sound quality too!
Can't wait for this
Voodoo sound booster is obsolete, there's a mod avalible already which boosts the sound the same way voodoo did..
Its awesome ! If I wasn't writing this on my phone I'd find you guys a link..
Boost audio system wide, alarm gave me a bloody fright this morning..
EDIT: Decided ill be nice and find the link hehe..
OP Topic: HERE
CWM Flashable packes: HERE
I suggest using the "60_sound_mod - max vol = 60 (boot sound on, camera sound off)" CWM package, it boosts your phone dramatically although not to max.. The safer option if you ask me..
Anyway thats my good deed done for today.. better get back to work !
fOmey said:
Voodoo sound booster is obsolete, there's a mod avalible already which boosts the sound the same way voodoo did..
Its awesome ! If I wasn't writing this on my phone I'd find you guys a link..
Boost audio system wide, alarm gave me a bloody fright this morning..
EDIT: Decided ill be nice and find the link hehe..
OP Topic: HERE
CWM Flashable packes: HERE
I suggest using the "60_sound_mod - max vol = 60 (boot sound on, camera sound off)" CWM package, it boosts your phone dramatically although not to max.. The safer option if you ask me..
Anyway thats my good deed done for today.. better get back to work !
Click to expand...
Click to collapse
Thanks for the link, I will check it out.
However Voodoo Sound is not just about boosting volume. I had it on my SGS1, and it greatly improved the overall sound quality as well. I cant really explain it as I am by no means an audiophile, however all I know is that Voodoo Sound left me with a smile on my face whilst listening to music.
djglenn1337 said:
Thanks for the link, I will check it out.
However Voodoo Sound is not just about boosting volume. I had it on my SGS1, and it greatly improved the overall sound quality as well. I cant really explain it as I am by no means an audiophile, however all I know is that Voodoo Sound left me with a smile on my face whilst listening to music.
Click to expand...
Click to collapse
+1
fOmey said:
Voodoo sound booster is obsolete, there's a mod avalible already which boosts the sound the same way voodoo did..
Its awesome ! If I wasn't writing this on my phone I'd find you guys a link..
Boost audio system wide, alarm gave me a bloody fright this morning..
EDIT: Decided ill be nice and find the link hehe..
OP Topic: HERE
CWM Flashable packes: HERE
I suggest using the "60_sound_mod - max vol = 60 (boot sound on, camera sound off)" CWM package, it boosts your phone dramatically although not to max.. The safer option if you ask me..
Anyway thats my good deed done for today.. better get back to work !
Click to expand...
Click to collapse
Hi you mean the mod is working on panadroid?
I thought it only works on stock roms.
djglenn1337 said:
Thanks for the link, I will check it out.
However Voodoo Sound is not just about boosting volume. I had it on my SGS1, and it greatly improved the overall sound quality as well. I cant really explain it as I am by no means an audiophile, however all I know is that Voodoo Sound left me with a smile on my face whilst listening to music.
Click to expand...
Click to collapse
I used voodo on SGSII and that just boosted volume, in saying that it actually boosted it with no sound quality loss.. Not like volume+.
That mod does exactly what vodoo did on the SGSII im very impressed by this mod, the fact that it boosts over all sound on the phone is great.
---------- Post added at 11:41 PM ---------- Previous post was at 11:40 PM ----------
bradputt said:
Hi you mean the mod is working on panadroid?
I thought it only works on stock roms.
Click to expand...
Click to collapse
I read a reply on the thread about it working on CM9 so theres no reason why it shouldnt work on paranoid.. search the thread.. my signature is outdated its from SGSII

"Klick" Problem after Speakers go off

Hello together,
i don´t find a similar Thread for the One with my Speaker problems. So i start a new one:
I got the following problem:
When i play a Sound with my Phone after 2-3 seconds the Speakers do a "klack" Sound in front of the shut down.
example:
When i press Volumen + or - the Phone plays a Sound, around 2-3 seconds later the Speaker do a "klack".
the problem seems for me similar with the problems the Galaxy Nexus got.
Someone can confirm that?
I get that with my Nexus 4 and almost every other Android phone i have used. I can mostly only hear it if i used some sort of volume boosting mod/app or if i hold my phone close to my ear after a sound is played. I think its normal, but annoying.
Wow, i thought i was the only one. I have the same issue. After playing a sound file (ring tone, music, anything), if you put the speakers to your ear you can hear a shhhh sound, then a "click" which almost sounds like the speakers "turn off". For some reason the same sound sometimes appears when opening a music app (such as HTC Music), as in the speakers get turned on OR some sort of amplifier gets applied. Turning off beats audio doesn't help. I got O2 (germany), 1.27 Stock rom. I'm tempted to try 1.28 custom rom to see if it's a software bug, but i am a bit afraid i might need warranty to get this fixed...
that is the sound of the amp / dac discharging. happens on my one x with and without earphones on
shiningarmor said:
that is the sound of the amp / dac discharging. happens on my one x with and without earphones on
Click to expand...
Click to collapse
So it's normal? Can it be turned off or fixed via software?
firaX said:
So it's normal? Can it be turned off or fixed via software?
Click to expand...
Click to collapse
i got rid of mine by uninstalling those volume boosting mods
shiningarmor said:
i got rid of mine by uninstalling those volume boosting mods
Click to expand...
Click to collapse
I doubt that's possible on stock Rom, is it?
I have it also, not all devices have the problem but HTC is aware of it and working on a fix.
firaX said:
I doubt that's possible on stock Rom, is it?
Click to expand...
Click to collapse
although it does click, but clicking to the point that is audible, i think something is wrong somewhere.. u might as well email htc about it
It's audible in a quiet environment when i have the phone close-ish to my face. Question is whether it's fixable via software update or whether i need hardware fix. I don't really feel like sending it in already...They'd probably say it is within tolerance anyhow.
I just wonder, tons of ppl complain about stuff such as "corner is too sharp, tiny gap etc", why don't more people complain about this noise if it is "normal"?
firaX said:
It's audible in a quiet environment when i have the phone close-ish to my face. Question is whether it's fixable via software update or whether i need hardware fix. I don't really feel like sending it in already...They'd probably say it is within tolerance anyhow.
I just wonder, tons of ppl complain about stuff such as "corner is too sharp, tiny gap etc", why don't more people complain about this noise if it is "normal"?
Click to expand...
Click to collapse
I have heard it's fixable by software
Sent from my HTC One using xda app-developers app
Is it like the click of death heard when a hard drive is about to die? lol! Sorry just curious but don't have my HTC One yet.
You never had a decent amplifier, had you?
It's dedicated amp. All those devices "click" when turned on and off. There's nothing to be fixed, although the sound should be very quiet.
It's like hdd click of death indeed. Sound is quiet but audible.
firaX said:
It's like hdd click of death indeed. Sound is quiet but audible.
Click to expand...
Click to collapse
Like I said, it's an amplifier turning off (and on as well to be precise - but usually this sound is more subtle).
I don't think this is an issue. It's just a fact of life with speakers.
Hekatonpsychos said:
Like I said, it's an amplifier turning off (and on as well to be precise - but usually this sound is more subtle).
Click to expand...
Click to collapse
i already said that. it should not be that loud
---------- Post added at 06:11 PM ---------- Previous post was at 06:10 PM ----------
firaX said:
It's audible in a quiet environment when i have the phone close-ish to my face. Question is whether it's fixable via software update or whether i need hardware fix. I don't really feel like sending it in already...They'd probably say it is within tolerance anyhow.
I just wonder, tons of ppl complain about stuff such as "corner is too sharp, tiny gap etc", why don't more people complain about this noise if it is "normal"?
Click to expand...
Click to collapse
ah , it shouldnt be that loud too, unless you're using earphones and u hear the click then it's fine. but if hearing it without speakers, i think it is insulated badly. like i said, try emailing htc
My Asus D2X Sound Card for my PC does that, always wondered what it was.

Viper4Android settings?

I just installed this and it looks very cool, but it's pretty overwhelming. Any suggestions for which .IRS files work well with headset, speaker, and bluetooth headset? For bluetooth headset I've also got my regular mono one for phone calls, and I have a stereo bluetooth one from Jaybird so I'd assume they use different settings. Speaking of, what do you guys put the settings at as well.
I looked a bit at the Viper4android thread, but it's like 700 pages long.
Before you get you A$$ handed to you for not following the rules i will spare you the moment of humility and provide you with this since i was stuck in the same situation you were but simply went to google and entered "Viper4android settings" and stumbled upon this which HELPED me!!!!!
http://vipersaudio.com/blog/
Hope it helps you like it did me
go to bob's diner. food is great
bckrupps said:
go to bob's diner. food is great
Click to expand...
Click to collapse
Agree with you 100%!!! Tuna melt with waffle fries,cant be beat hahahahahahaha
solrac.dc said:
Agree with you 100%!!! Tuna melt with waffle fries,cant be beat hahahahahahaha
Click to expand...
Click to collapse
left myself logged in. i have wise guy roommates. at least they didnt post something that would get me tossed outta here
solrac.dc said:
Before you get you A$$ handed to you for not following the rules i will spare you the moment of humility and provide you with this since i was stuck in the same situation you were but simply went to google and entered "Viper4android settings" and stumbled upon this which HELPED me!!!!!
http://vipersaudio.com/blog/
Hope it helps you like it did me
Click to expand...
Click to collapse
Oh, I didn't realize I was breaking a rule. You mean we can't discuss optimal settings for an app for our phones? The only rule I see that might be loosely tied is using search, but I have searched. I have searched and am aware of the main 700 page thread, and also the English viper website, none of these have users discussing the G2 specifically. I'd rather avoid that 700+ page thread since I am specifically asking about the G2 in the G2 forums and what settings work well for others.
Just to repeat, I'm not looking on how to get the program to run or install it, I am looking for other G2 owners feedback on which particular modes worked well for them. I thought it might be a nice discussion.
If I'm breaking the rules please delete my thread then, my apologies.
Moving on..
I don't use the bluetooth headset so I can't help you on that.
But for the headset, I realised that using the xHifi setting under clarity gives quite a little whitenoise. But not using makes your music sound muffled , so I guess it's a trade off(unless you know how to configure the IRS files). I am using my mid range sennheiser CX-300II without any IRS filters, cos none of them work well. You could try loading everything into the folder and going through them 1 by 1, or even making the file which is rather tedious. I couldn't be bothered, the playbackgain control and dynamic system is enough for me.
If you plug your phone into powerful speakers (I have a bose 321 but damn those things make the windows shake) you MUST turn off the VIPER bass and reduce the dynamic bass to ~15%. Differential surround(Haas effect) makes the sound sound off center on speakers so avoid it.
I noticed G2 doesn't have music effect setting, am i suppose to assume that viper is on?
No it's not that simple. What I did was:
1. Install the drivers
2. Backup build.prop then change the lines specified in the main thread for Viper
3. Install google play(doesn't work on stock LG player for me)
3b. (unsure if really necessary) Disable stock LG player
4. Reboot
5. Wait for boot to complete and see all the superSU permission flashing...
6. Play something, then go into viper, enable the first option on the speaker tab and check the "driver status". It should say that it is installed/normal, that it is enabled and that it is processing. To really be sure go play around with the settings but be careful with the gain (don't ramp it sky high and drop your phone in shock)
Sent from my ASUS Transformer Pad TF300T
I just installed the app and it does all the necessary things for you. But still, Viper4Android sucks for our phone. The driver it installs significantly lowers the audio quality. With a huge amount of tweaking you can finally get the quality back up to where the G2 is at stock. Everyone is better off not using this mod for the G2 unless the author gets a much better audio driver designed for our chipset
check out the V4A audio profiles... it gives a great shares from people on settings... try them and check out the one you prefer
EniGmA1987 said:
I just installed the app and it does all the necessary things for you. But still, Viper4Android sucks for our phone. The driver it installs significantly lowers the audio quality. With a huge amount of tweaking you can finally get the quality back up to where the G2 is at stock. Everyone is better off not using this mod for the G2 unless the author gets a much better audio driver designed for our chipset
Click to expand...
Click to collapse
Yeah I don't know how happy I am with this app yet. I can get stuff louder, but I hear more distortion, but I have to play around a bit. One odd thing is that different things have different volumes after installing this. For example, my speaker phone when in a call is nice and loud, but when checking voicemail it is very quiet, kind of odd and I can't figure out how to selectively fix these things so I may be forced to uninstall.
EniGmA1987 said:
I just installed the app and it does all the necessary things for you. But still, Viper4Android sucks for our phone. The driver it installs significantly lowers the audio quality. With a huge amount of tweaking you can finally get the quality back up to where the G2 is at stock. Everyone is better off not using this mod for the G2 unless the author gets a much better audio driver designed for our chipset
Click to expand...
Click to collapse
spinedoc said:
Yeah I don't know how happy I am with this app yet. I can get stuff louder, but I hear more distortion, but I have to play around a bit. One odd thing is that different things have different volumes after installing this. For example, my speaker phone when in a call is nice and loud, but when checking voicemail it is very quiet, kind of odd and I can't figure out how to selectively fix these things so I may be forced to uninstall.
Click to expand...
Click to collapse
I think you guys really don't know what you're taking about. The clarity viper adds to the sound on both my stereo and my headphones is absolutely unreal. After having set up viper, I think the biggest flaw of a stock g2 might be the dull und muffled sound it transfers to proper speakers.
android404 said:
I think you guys really don't know what you're taking about. The clarity viper adds to the sound on both my stereo and my headphones is absolutely unreal. After having set up viper, I think the biggest flaw of a stock g2 might be the dull und muffled sound it transfers to proper speakers.
Click to expand...
Click to collapse
Think what you want but the drivers this uses noticeably took away from clarity in all aspects of the sound. Every speaker setup can sound different so maybe this type of sound just works better for you, my high end systems though it definitely takes a lot away from the audio
android404 said:
I think you guys really don't know what you're taking about. The clarity viper adds to the sound on both my stereo and my headphones is absolutely unreal. After having set up viper, I think the biggest flaw of a stock g2 might be the dull und muffled sound it transfers to proper speakers.
Click to expand...
Click to collapse
That's good news to me. Can you post up exactly what settings, .irs files,etc you have? I'd be most interested in phone-speaker settings, but I wouldn't mind just piggybacking off you since you say you have such stellar results.
EniGmA1987 said:
Think what you want but the drivers this uses noticeably took away from clarity in all aspects of the sound. Every speaker setup can sound different so maybe this type of sound just works better for you, but high end sound systems will notice the quality reduction.
Click to expand...
Click to collapse
neither am I nore do I have a high end soundsystem so I don't notice the difference to the worse. Who listens to anything on a high end soundsystem through a phone?
On my dynavoice speakers and my b&w headphones my music gets several different new dimensions using viper, regardless of the code of the driver.
Edit: of course every setup and every set of ears gets different subjective results. But it's so obvious that the sound is so much better with viper
android404 said:
neither am I nore do I have a high end soundsystem so I don't notice the difference to the worse. Who listens to anything on a high end soundsystem through a phone?
On my dynavoice speakers and my b&w headphones my music gets several different new dimensions using viper, regardless of the code of the driver.
Edit: of course every setup and every set of ears gets different subjective results. But it's so obvious that the sound is so much better with viper
Click to expand...
Click to collapse
So can you post up your settings or no?
spinedoc said:
So can you post up your settings or no?
Click to expand...
Click to collapse
You got a pm right after you asked me yesterday.
Edit: no you didn't. Must have gone wrong, is coming soon.
---------- Post added at 12:26 AM ---------- Previous post was at 12:13 AM ----------
spinedoc said:
So can you post up your settings or no?
Click to expand...
Click to collapse
This is my headphones profile. I haven't set up one for the phone speakers. It's a modified copy of something I found somewhere on xda. I guess you can just create a headphone profile yourself and then copy in the following text instead of what it says in your backed up profile. But I'm not sure if that will work or if it will destroy your phone and kill your family. You will find your profiles (once they are backed up) under storage/emulated/0/viper4android/profile. This works on my headphones and with my ears, that doesn't mean it will work for you. Here it goes:
# ViPER4Android audio effect profile !
# Created 2013-10-21 12:15:33
profile_name=piggyback
viper4android.headphonefx.enable=boolean=true
viper4android.speakerfx.enable=boolean=false
viper4android.headphonefx.playbackgain.enable=boolean=false
viper4android.headphonefx.fireq.enable=boolean=true
viper4android.headphonefx.convolver.enable=boolean=true
viper4android.headphonefx.colorfulmusic.enable=boolean=false
viper4android.headphonefx.diffsurr.enable=boolean=false
viper4android.headphonefx.vhs.enable=boolean=false
viper4android.headphonefx.reverb.enable=boolean=false
viper4android.headphonefx.dynamicsystem.enable=boolean=false
viper4android.headphonefx.dynamicsystem.tube=boolean=false
viper4android.headphonefx.fidelity.bass.enable=boolean=true
viper4android.headphonefx.fidelity.clarity.enable=boolean=true
viper4android.headphonefx.cure.enable=boolean=false
viper4android.headphonefx.playbackgain.ratio=string=50
viper4android.headphonefx.playbackgain.maxscaler=string=200
viper4android.headphonefx.playbackgain.volume=string=80
viper4android.headphonefx.fireq=string=4.5;4.5;2.75;0.0;0.0;0.0;0.0;-0.5;2.75;4.0;
viper4android.headphonefx.fireq.custom=string=4.5;4.5;2.75;0.0;0.0;0.0;0.0;-0.5;2.75;4.0;
viper4android.headphonefx.convolver.kernel=string=/storage/emulated/0/ViPER4Android/Kernel/B&W Stereo Core.irs
viper4android.headphonefx.colorfulmusic.coeffs=string=120;200
viper4android.headphonefx.colorfulmusic.midimage=string=150
viper4android.headphonefx.diffsurr.delay=string=500
viper4android.headphonefx.vhs.qual=string=3
viper4android.headphonefx.reverb.roomsize=string=0
viper4android.headphonefx.reverb.roomwidth=string=0
viper4android.headphonefx.reverb.damp=string=0
viper4android.headphonefx.reverb.wet=string=0
viper4android.headphonefx.reverb.dry=string=50
viper4android.headphonefx.dynamicsystem.coeffs=string=180;5800;55;80;10;70
viper4android.headphonefx.dynamicsystem.bass=string=5
viper4android.headphonefx.fidelity.bass.mode=string=0
viper4android.headphonefx.fidelity.bass.freq=string=100
viper4android.headphonefx.fidelity.bass.gain=string=150
viper4android.headphonefx.fidelity.clarity.mode=string=2
viper4android.headphonefx.fidelity.clarity.gain=string=150
viper4android.headphonefx.cure.crossfeed=string=0
viper4android.headphonefx.outvol=string=100
viper4android.headphonefx.channelpan=string=20
viper4android.headphonefx.limiter=string=100
viper4android.speakerfx.limiter=string=100
TY much, I'll give it a shot!!!

Categories

Resources