[Q] Flashing Error ! Please help. - Xperia Play General

Hello, I have an Xperia Play and since i had it i never flashed it , The only thing i did was rooting by using gingerbreak.
And i was trying to flash the new update http://forum.xda-developers.com/showthread.php?t=1097591
And when i use flashtool to flash it an Error massage appear :
13/013/2011 05:13:49 - ERROR - Error flashing. Aborted
13/013/2011 05:13:49 - INFO - Now unplug the device and power it on
13/013/2011 05:13:49 - INFO - Then go to application settings
13/013/2011 05:13:49 - INFO - turn on Unknown Sources and Debugging
And the problem is i cant boot the phone!!
I tried a different FTF file from here: http://forum.xda-developers.com/showthread.php?t=1048422
And i also tried this http://forum.xda-developers.com/showthread.php?t=1130639
But still nothing new..
So please help me my Phone can't boot.

ddsds said:
Hello, I have an Xperia Play and since i had it i never flashed it , The only thing i did was rooting by using gingerbreak.
And i was trying to flash the new update http://forum.xda-developers.com/showthread.php?t=1097591
And when i use flashtool to flash it an Error massage appear :
13/013/2011 05:13:49 - ERROR - Error flashing. Aborted
13/013/2011 05:13:49 - INFO - Now unplug the device and power it on
13/013/2011 05:13:49 - INFO - Then go to application settings
13/013/2011 05:13:49 - INFO - turn on Unknown Sources and Debugging
And the problem is i cant boot the phone!!
I tried a different FTF file from here: http://forum.xda-developers.com/showthread.php?t=1048422
And i also tried this http://forum.xda-developers.com/showthread.php?t=1130639
But still nothing new..
So please help me my Phone can't boot.
Click to expand...
Click to collapse
why device are you choosing in flashtool :? just pick the first one, i think its the x10

AndroHero said:
why device are you choosing in flashtool :? just pick the first one, i think its the x10
Click to expand...
Click to collapse
Thanks for helping, But how can i choose a file in Flashtool ?
As i understand i can only choose the FTF file , And i chose the Xperia Play one.

OK, After a lot of searching i found out that i had my phone Bootloader Unlocked before flashing,
And after that i tried to flash it and i got the error and it wont boot.
From what i red i only have 2 things to do :
1- Get the phone booting but without radio.
2- give it to sony and tell them that it just crashed while i was updating it.(And don't tell them anything about to root or the bootloadr)
So please if anyone knows any better way to fix it please tell me.

ddsds said:
OK, After a lot of searching i found out that i had my phone Bootloader Unlocked before flashing,
And after that i tried to flash it and i got the error and it wont boot.
From what i red i only have 2 things to do :
1- Get the phone booting but without radio.
2- give it to sony and tell them that it just crashed while i was updating it.(And don't tell them anything about to root or the bootloadr)
So please if anyone knows any better way to fix it please tell me.
Click to expand...
Click to collapse
You didnt need to unlock you bootloader to use flashtool, but now you have just flash a system.img from fastboot, your phone isnt bricked unless you tried to do an OTA updated with an unlocked bootloader

AndroHero said:
You didnt need to unlock you bootloader to use flashtool, but now you have just flash a system.img from fastboot, your phone isnt bricked unless you tried to do an OTA updated with an unlocked bootloader
Click to expand...
Click to collapse
I searched for the system.img file and i found these files :
1.play_modded.img
2.R800i_3.0.1.A.0.145_UK_system.img
3.recoveryPLAY.img
4.system.sin (I know it's an "SIN" file)
And i tried to use fastboot with them all and i allways get the same result:
"sending 'system' (XXXX KB)..."
I watied for very long time but nothing happend.
So please tell me if i am doing any thing wrong.

ddsds said:
I searched for the system.img file and i found these files :
1.play_modded.img
2.R800i_3.0.1.A.0.145_UK_system.img
3.recoveryPLAY.img
4.system.sin (I know it's an "SIN" file)
And i tried to use fastboot with them all and i allways get the same result:
"sending 'system' (XXXX KB)..."
I watied for very long time but nothing happend.
So please tell me if i am doing any thing wrong.
Click to expand...
Click to collapse
Try formatting /system and /boot first,
In fastboot type in
fastboot erase system
fastboot erase boot
Then flash this kernel with the command "fastboot flash boot boot.img"
http://forum.xda-developers.com/showthread.php?t=1176502
finally flash this system image with command "fastboot flash system xxxxxx.img"
http://forum.xda-developers.com/showthread.php?t=1098736

AndroHero said:
Try formatting /system and /boot first,
In fastboot type in
fastboot erase system
fastboot erase boot
Then flash this kernel with the command "fastboot flash boot boot.img"
http://forum.xda-developers.com/showthread.php?t=1176502
finally flash this system image with command "fastboot flash system xxxxxx.img"
http://forum.xda-developers.com/showthread.php?t=1098736
Click to expand...
Click to collapse
Still the same problem stuck with the :
"sending 'boot'"
And i also tried to flash the system but with the same result.

ddsds said:
Still the same problem stuck with the :
"sending 'boot'"
And i also tried to flash the system but with the same result.
Click to expand...
Click to collapse
And you are sure you have unlocked your bootloader maybe you should ask or PM blagus, he is the expert in these sorts of things

AndroHero said:
And you are sure you have unlocked your bootloader maybe you should ask or PM blagus, he is the expert in these sorts of things
Click to expand...
Click to collapse
Yes i just checked and it's unlocke.
And thank you so much for helping and i will PM him and wait .

Finally i got it to work !
I deleted the system with fastboot , Than i used this tool :http://forum.xda-developers.com/showthread.php?t=1134334 to re-lock the bootloader.
And finally i used the SE PC programme to repair the phone with the latest Update.
Thank you AndroHero very much for helping me.

ddsds said:
Finally i got it to work !
I deleted the system with fastboot , Than i used this tool :http://forum.xda-developers.com/showthread.php?t=1134334 to re-lock the bootloader.
And finally i used the SE PC programme to repair the phone with the latest Update.
Thank you AndroHero very much for helping me.
Click to expand...
Click to collapse
Thats great i'm glad you got it soted

Related

Stuck in Fastboot Mode (pls help!)

Hey,
I had problems with the phone and support told me I should flash it. So when I wanted to "flash system.img"
it showed me: Data Transfer Failure (after 48secs)
and when I type in "fastboot devices" now, the name of device now only shows questionmarks: "?????????? fastboot"
And nothing is working now
So when i try to flash system again, windows says "fastboot.exe stopped working"
I am devastated. How can this happen? and what can I do? Please help me
OlivBlum said:
Hey,
I had problems with the phone and support told me I should flash it. So when I wanted to "flash system.img"
it showed me: Data Transfer Failure (after 48secs)
and when I type in "fastboot devices" now, the name of device now only shows questionmarks: "?????????? fastboot"
And nothing is working now
So when i try to flash system again, windows says "fastboot.exe stopped working"
I am devastated. How can this happen? and what can I do? Please help me
Click to expand...
Click to collapse
So you were on cos12.1 and you tried to flash stock images using fastboot? Explain a bit what happened so that i can guide you more accurately..
Anyhow you can always go here http://forum.xda-developers.com/zuk-z1/development/how-to-flash-zuk-z1-zui-version-t3265741
And use qfil tool to flash to stock .. read a few posts below to figure out how you should do this and u will end up with zui 1.5 then you can convert to cm or any other rom
Hey thanks for the answer
So I was on COS 12.1 all normal, no root, no unlocked bootloader.
And I wanted to flash COS 12.1 again. So I downloaded the official fastboot image from cyngn . com/support and unzipped it. In there was a system.img file that I tried to flash via "fastboot flash system system.img" Thats when the error occured.
Before that I unlocked the bootloader, started the device, then I flashed the recovery and afterwards the system.
I will now look into the link and see if it helps and report back. Thanks already
OlivBlum said:
Hey thanks for the answer
So I was on COS 12.1 all normal, no root, no unlocked bootloader.
And I wanted to flash COS 12.1 again. So I downloaded the official fastboot image from cyngn . com/support and unzipped it. In there was a system.img file that I tried to flash via "fastboot flash system system.img" Thats when the error occured.
Before that I unlocked the bootloader, started the device, then I flashed the recovery and afterwards the system.
I will now look into the link and see if it helps and report back. Thanks already
Click to expand...
Click to collapse
Before you go to what i suggested
Can you boot into fastboot or recovery ?
If you have whatsapp add me then we can talk it through would be easier than me checking the forum everynow and then ..u'll find my number in private

Need help

Hi,, I need help, don't now what to do, I run King root on my phone, xt1562, and **** up everything.... you can see in the pics.. I search, and I can find solution, so please somebody give me the solution for this problem. I tray with adb, mfasboot, rds life to refresh on lollipop without results.
Not sure if i understand your problem, but have you tried to flash twrp to be able to boot in recovery and then flash a rom
you need to unlock your device first then flash twrp recovery , and install supersu to root the device.
try this: http://forum.xda-developers.com/moto-x-play/general/untested-how-to-root-moto-x-play-t3211941
I tray that, but don't work for me, before I start with King root I alow OEM unlock on the developer settings on the phone, and now Adb don't recognize that and ask for OEM unlock, and it impossible now cos phone don't work
lapena said:
I tray that, but don't work for me, before I start with King root I alow OEM unlock on the developer settings on the phone, and now Adb don't recognize that and ask for OEM unlock, and it impossible now cos phone don't work
Click to expand...
Click to collapse
Flash factory firmware, it's pretty much the only thing you can do with locked bootloader. And don't use kingroot any more
minimale_ldz said:
Flash factory firmware, it's pretty much the only thing you can do with locked bootloader. And don't use kingroot any more
Click to expand...
Click to collapse
I try that last 7days with no success, that's why I'm posting this, if you now some link that will be great. Tnx
lapena said:
I try that last 7days with no success, that's why I'm posting this, if you now some link that will be great. Tnx
Click to expand...
Click to collapse
Did you originally have Lollipop or MM. Here's MM firmware:
If it's european XT1562, single sim, try this one:
http://www.filefactory.com/file/1ub...MPD24.107-52_cid7_subsidy-DEFAULT_CFC.xml.zip
If it's asian, dual sim, this one:
http://www.filefactory.com/file/49g...MPD24.107-70_cid7_subsidy-DEFAULT_CFC.xml.zip
(double check it, for you own safety)
Make sure you've got moto drivers and use fastboot or mfastboot.
What messages did you get when flashing before, what did it say exactly after executing fastboot commands?
Tnx
Before, phone was originally on lollipop, and receive Ota update on MM6. 0.1.
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
I try with fastboot, and rds lite, computer show connection like adb devices, but when I try to flash, said failed, and rds don't show anethyng, don't recognize phone.
lapena said:
Before, phone was originally on lollipop, and receive Ota update on MM6. 0.1.
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
I try with fastboot, and rds lite, computer show connection like adb devices, but when I try to flash, said failed, and rds don't show anethyng, don't recognize phone.
Click to expand...
Click to collapse
If you installed MM OTA you can't flash Lollipop firmware, it must be MM (generally speaking). Get into bootloader and try to flash MM with fastboot.
minimale_ldz said:
If you installed MM OTA you can't flash Lollipop firmware, it must be MM (generally speaking). Get into bootloader and try to flash MM with fastboot.[/QUOTE
Thats the problem..look at adeded pictures in first post...
Click to expand...
Click to collapse
lapena said:
Hi,, I need help, don't now what to do, I run King root on my phone, xt1562, and **** up everything.... you can see in the pics.. I search, and I can find solution, so please somebody give me the solution for this problem. I tray with adb, mfasboot, rds life to refresh on lollipop without results.
Click to expand...
Click to collapse
Check this out, this guy had the same problem and report here if it worked, it'll help others.
http://forum.xda-developers.com/showpost.php?p=68813881&postcount=43
lapena said:
minimale_ldz said:
If you installed MM OTA you can't flash Lollipop firmware, it must be MM (generally speaking). Get into bootloader and try to flash MM with fastboot.[/QUOTE
Thats the problem..look at adeded pictures in first post...
Click to expand...
Click to collapse
I can see it boots in fastboot mode, which is good, but your firmware is messed. Is your phone sim-free or carrier branded? If it's sim-free you should be able to flash the firmware I linked.
Click to expand...
Click to collapse
Tnx
Yes it's Sim free xt1562, model SM4232AD1T1, belive me I try everything, adb, or rds, or mfasboot., don't recognize device, in device list on comp. It's listed something like Fastbot lux... Windows 7.
Tnx, one more time for you will to help.
lapena said:
Yes it's Sim free xt1562, model SM4232AD1T1, belive me I try everything, adb, or rds, or mfasboot., don't recognize device, in device list on comp. It's listed something like Fastbot lux... Windows 7.
Tnx, one more time for you will to help.
Click to expand...
Click to collapse
OK, I guess you installed drivers for it, but maybe reinstall. They're here:
https://motorola-mobility-en-xp.custhelp.com/app/answers/detail/a_id/89880
Can you tell what exactly it says when you enter
Code:
fastboot devices
in command window?
Tnx
When I type that command just display some numbers... Am not at home now, so I can't post number
lapena said:
When I type that command just display some numbers... Am not at home now, so I can't post number
Click to expand...
Click to collapse
if it displays something like this:
Code:
30D41467 FASTBOOT
Then I guess you're good to go with flashing firmware
That's number and text what I got on display, but when I tray next kommand, Fastbot failed.. What to do...for example I typed command fastbot OEM fb_mode_set. On display have this line
(bootloader) slot-count:notfound
(bootloader) slot-suffix:not found
(bootloader) slot-suffix:not found
FAED(remote failure)
lapena said:
That's number and text what I got on display, but when I tray next kommand, Fastbot failed.. What to do...
Click to expand...
Click to collapse
what's the next command you try?
---------- Post added at 20:44 ---------- Previous post was at 20:32 ----------
lapena said:
That's number and text what I got on display, but when I tray next kommand, Fastbot failed.. What to do...for example I typed command fastbot OEM fb_mode_set. On display have this line
(bootloader) slot-count:notfound
(bootloader) slot-suffix:not found
(bootloader) slot-suffix:not found
FAED(remote failure)
Click to expand...
Click to collapse
Did you try to skip this one and start with flashing gpt.bin and then just do the minimum, like here:
http://forum.xda-developers.com/showpost.php?p=62708260&postcount=5
(you may have more sparsechunks to flash, so check their number)
Tnx
Of course I am, and same thing happened... I'm going crazy...
lapena said:
Of course I am, and same thing happened... I'm going crazy...
Click to expand...
Click to collapse
Did you try to skip first 2 commands (gpt and bootloader) and start from
Code:
fastboot flash logo logo.bin
?

P9 lite l21 tottaly bricked

So this is what happened, I was on I MedroM v3, so I was there was a firmware in beta (the 7.0 update) so I've done it and now I'm stuck in a bootloop
, I flashed the Nougat recovery so it locked my bootloader
and removed TWRP so I can't even go to flash the old rom
again. I also can't get the product id now cause I don't have an OS installed, there's no way to pull it without it an OS. I have tried every existing method possible and nothing (including the sd
card method with update.app and bla bla bla)
So I can't flash files through fastboot It says " Command not allowed"
Can somebody please help me, I have experience with flashing and everything but I in my entire life have not seen that a phone company so big doesn't have a ******** flashtool
or some other way of recovering hard bricked devices instead of buying a new motherboard or something..
If somebody could help me I would be so grateful! Please excuse my language I'm very mad and frustrated, I need my phone for work and now I'm offline..
- Fastboot is available but the bootloader is locked
- No TWRP
- No OS Installed
Download a firmware you want, extract the update.app and put it in sd card folder. From the phone completely shutdown, press vol +, vol - and power at the same time hold it until the updater with percentage progress moving appears.. you should be fine after that.. ? i believe. Maybe try it. That's what i did on my case
No, It says "Software Install failed! Incompatability with current software version"
When I go to eRecovery t says that it cant connect to WIFI.
As I said i tried every known method and I can't get it to work. Spent my whole day trying to fix it, I'm out of ideas
akseon said:
So this is what happened, I was on I MedroM v3, so I was there was a firmware in beta (the 7.0 update) so I've done it and now I'm stuck in a bootloop
, I flashed the Nougat recovery so it locked my bootloader
and removed TWRP so I can't even go to flash the old rom
again. I also can't get the product id now cause I don't have an OS installed, there's no way to pull it without it an OS. I have tried every existing method possible and nothing (including the sd
card method with update.app and bla bla bla)
So I can't flash files through fastboot It says " Command not allowed"
Can somebody please help me, I have experience with flashing and everything but I in my entire life have not seen that a phone company so big doesn't have a ******** flashtool
or some other way of recovering hard bricked devices instead of buying a new motherboard or something..
If somebody could help me I would be so grateful! Please excuse my language I'm very mad and frustrated, I need my phone for work and now I'm offline..
- Fastboot is available but the bootloader is locked
- I can't boot into TWRP
- No OS Installed
Click to expand...
Click to collapse
I had the same problem, but with the L31.
First try to use https://www.xda-developers.com/how-to-install-twrp/
Then with the file i send you attached (MAF32)
- Fastboot flash boot boot.img
- Fastboot flash system system.img
- Fastboot flash cust cust.img
- and finally TWRP
After that i puted the first exctrated uppdate.pp in my memory card and with the "3 buttons" process i flashed it. Then i repeated the same process with the second one (http://forum.xda-developers.com/hua...droid-nougat-dev-build-huawei-t3488360/page33). After this finished, again with the 3 buttons i made a factory reset.
5 minutes later, it was working.
i don't understand how to boot to fastboot ? and where to get these img files i am really stuck here pleaase
You don't understand, In order to unlock the bootloader i need the product ID which you get by typing some number combination in the dialer. I cant get to the dialer cause I dont have any OS installed, cause the old was dirty flashed. So thats why i cant flash TWRP etc..
hello, i'm using Huawei P9 Lite VNS-L21. i tried to flash the stock nougat Firmware Which i actually did and it worked flawless! but there was a little problem because there wasn't any Software update option in there, so after that i wanted to downgrade to stock MM. IDK what happened wrong while installing that, my phone got BRICKED. i don't have the Erecovery and twrp either. i cant flash firmware via DLOAD Method. the only thing i have is FASTBOOT mode..
i tried literally everything.. but nothing working..
I sent it to HUAWEI CUSTOMER CARE and they returned it back after a couple of days...
im really very worried because ive been using this phone for like 2 months ... and now im helplesss, If anybody is reading this please help/ assist me out of this.. i'd be really greatfull if anybody's going to help me out..
hash26 said:
hello, i'm using Huawei P9 Lite VNS-L21. i tried to flash the stock nougat Firmware Which i actually did and it worked flawless! but there was a little problem because there wasn't any Software update option in there, so after that i wanted to downgrade to stock MM. IDK what happened wrong while installing that, my phone got BRICKED. i don't have the Erecovery and twrp either. i cant flash firmware via DLOAD Method. the only thing i have is FASTBOOT mode..
i tried literally everything.. but nothing working..
I sent it to HUAWEI CUSTOMER CARE and they returned it back after a couple of days...
im really very worried because ive been using this phone for like 2 months ... and now im helplesss, If anybody is reading this please help/ assist me out of this.. i'd be really greatfull if anybody's going to help me out..
Click to expand...
Click to collapse
Why don't you flash TWRP in fastboot mode?
fasboot flash recovery recovery.img
PS: You need to start your own thread, really, rather than hijack someone else's
StrangerWeather said:
Why don't you flash TWRP in fastboot mode?
fasboot flash recovery recovery.img
PS: You need to start your own thread, really, rather than hijack someone else's
Click to expand...
Click to collapse
I'm new to this forum, if i did something that i shoud not I'm sorry about that and thanks for replying..
Ive tried many times to flash twrp recovery through fastboot it says installed but when i try to go to recovery there isnt any recovery...
i have a post with a same problem but with frp active, any sugestions?
hash26 said:
I'm new to this forum, if i did something that i shoud not I'm sorry about that and thanks for replying..
Ive tried many times to flash twrp recovery through fastboot it says installed but when i try to go to recovery there isnt any recovery...
Click to expand...
Click to collapse
What happens when you type : adb reboot recovery?
StrangerWeather said:
What happens when you type : adb reboot recovery?
Click to expand...
Click to collapse
Nothing happens it just reboots itself again n again but recovery doesn't open itself
hash26 said:
Nothing happens it just reboots itself again n again but recovery doesn't open itself
Click to expand...
Click to collapse
Ok, this is what I would do if I were you. I would pick a rom in the development section, eg. RR. Then I would extract it and get the system image and boot image and fastboot flash them. To extract the rom, use SuperR's Kitchen.
Hope this helps.
StrangerWeather said:
Ok, this is what I would do if I were you. I would pick a rom in the development section, eg. RR. Then I would extract it and get the system image and boot image and fastboot flash them. To extract the rom, use SuperR's Kitchen.
Hope this helps.
Click to expand...
Click to collapse
I'm about to do this! Thanks you
StrangerWeather said:
Ok, this is what I would do if I were you. I would pick a rom in the development section, eg. RR. Then I would extract it and get the system image and boot image and fastboot flash them. To extract the rom, use SuperR's Kitchen.
Hope this helps.
Click to expand...
Click to collapse
thank you so much for replying but there is something i want to ask you about..
the tool you told me about "SuperR's Kitchen" works on Linux.. and i'm a windows user is there any other software that runs on Windows and works as same as super'R ..
Waiting for your reply!!
hash26 said:
thank you so much for replying but there is something i want to ask you about..
the tool you told me about "SuperR's Kitchen" works on Linux.. and i'm a windows user is there any other software that runs on Windows and works as same as super'R ..
Waiting for your reply!!
Click to expand...
Click to collapse
Hi!
There is this but I haven't tested it: https://forum.xda-developers.com/android/help/extract-dat-marshmallow-lollipop-easily-t3334117
Let us know how it goes!

Need help P10+ bricked

Hi,
i was on VKY-L29C636 with Oreo B360. TWRP_3.2.1-0_OREO installed and rooted. bootloader unlocked
My bad i tried to unoot via supersu app and got bricked. now i cannot go to recovery.
Normal boot shows
Error!
Func NO : 10 (boot image)
Error No : 2 (load failed)
if i tried to go to recovery via vol Up + power then got
Func No : 11 ( recovery image)
Error No: 2 ( load failed)
i think i should have installed original boot.img to unroot.
installed twrp again from fastboot mode without luck.
can it be solved by installing boot.img and system.img??? but i cannot extract boot.img, system.img from update.app ( B360 firmware) via huawei rom extractor.
Thanking you...
Rommco05 said:
You need to flash over fastboot stock recovery, ramdisk and kernel. Good luck
edit: In huaweiExtractor go to settings and uncheck this options: verify header checksum, verify file checksum and keep original timestamp
Click to expand...
Click to collapse
Thanks.
i could see kernel and ramdisk but cannot find the recovery although there are 4 ERECOVERY_KERNE, _RAMDI, _ VMET, _VENDO
aslo
3 RECOVERY_RAMDIS, _VBMETA, _VENDOR are there.
Edit:
Thank you very much i flashed only kernel and ramdisk and the phone is booted and in good state
Edit2: TWRP working too
what are the exact commands? i have the same issue and kernel is saying FAILED (remote: partition length get error) when i try to flash it
helppp
I followed the procedure and installed ramdisk and the kernel but then later I can not restore via the procedure with hwota8 .. can anyone help me?I'm losing hope..I can still install the twrp. Can you help?
Rommco05 said:
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk recovery_ramdisk.img
Click to expand...
Click to collapse
ok i was able to flash those commands - it still doesnt boot...i was able to get twrp back tho is there something else i should try? thanks for your help.
sismario89 said:
I followed the procedure and installed ramdisk and the kernel but then later I can not restore via the procedure with hwota8 .. can anyone help me?I'm losing hope..I can still install the twrp. Can you help?
Click to expand...
Click to collapse
im in the same situation hwota8 didnt work for me either - did you figure it out?
rck408 said:
im in the same situation hwota8 didnt work for me either - did you figure it out?
Click to expand...
Click to collapse
My phone didn't turn on in any mode.. I have totally bricked.. I can try with warranty but is too hard
sismario89 said:
My phone didn't turn on in any mode.. I have totally bricked.. I can try with warranty but is too hard
Click to expand...
Click to collapse
Did u solve this? I have same problem.
hi, what are the exact comands you sent to your phone? and how you connected? thank you

[X01BD] Can't install TWRP after unlocking with Official UnlockTool

Hi guys,
I am using Zenfone Max Pro M2. I wanted to install a custom rom and I tried to unlock bootloader but I unlocked it through official unlocktool. Now I can't flash anything or send any command through fastboot, whenever I do then it restarts the device.
When I try to keep the fastboot command running and then connect phone - it throws errors like "Fail - Too many links", "Fail - Write to device fail (No such file or directory)" or "Fail- Unknown command".
I tried unlocking bootloader with the unofficial way provided in https://forum.xda-developers.com/max-pro-m2/how-to/unlook-bootloader-root-asus-zenfone-max-t3885457
but it isn't working either, any fastboot command is rebooting the device although bootloader is unlocked.
How do I fix this?
EDIT: Things I have tried:
- Changing USB Cable and Port
- Reinstalling ADB and device driver
- Reunlocking bootloader from UnlockTool (don't know why I did that again)
- Unofficial way to unlock bootloader
None of it helped.
Thanks
Mr147 said:
Hi guys,
I am using Zenfone Max Pro M2. I wanted to install a custom rom and I tried to unlock bootloader but I unlocked it through official unlocktool. Now I can't flash anything or send any command through fastboot, whenever I do then it restarts the device.
When I try to keep the fastboot command running and then connect phone - it throws errors like "Fail - Too many links", "Fail - Write to device fail (No such file or directory)" or "Fail- Unknown command".
I tried unlocking bootloader with the unofficial way provided in https://forum.xda-developers.com/max-pro-m2/how-to/unlook-bootloader-root-asus-zenfone-max-t3885457
but it isn't working either, any fastboot command is rebooting the device although bootloader is unlocked.
How do I fix this?
EDIT: Things I have tried:
- Changing USB Cable and Port
- Reinstalling ADB and device driver
- Reunlocking bootloader from UnlockTool (don't know why I did that again)
- Unofficial way to unlock bootloader
None of it helped.
Thanks
Click to expand...
Click to collapse
Guys, no one to help or assist?
Mr147 said:
Guys, no one to help or assist?
Click to expand...
Click to collapse
Did u try running the command at the adb folder?shift+right click in adb folder?
Is Usb debugging enabled in developer options?
X10MINISTER said:
Did u try running the command at the adb folder?shift+right click in adb folder?
Is Usb debugging enabled in developer options?
Click to expand...
Click to collapse
Yes, everything done.
Still no success.
Mr147 said:
Yes, everything done.
Still no success.
Click to expand...
Click to collapse
Did ur unlocking bootloader succeed?
Did you try relocking the bootloader ?
1) Try relocking the bootloader using the methods described here :
https://forum.xda-developers.com/max-pro-m2/how-to/unroot-relock-bootloader-max-pro-m2-t3885870
See if it successfully relocks...
If it does, then next time unlock using the unofficial method only...
2) If not then maybe try contacting ASUS... Tweet them on Twitter... Companies usually respond very fast on Twitter, since their reputations are at stake...
3) All else fails then try rooting it using something like Kingroot... Once rooted, flash TWRP Recovery using Flashify... then flash any custom ROM u want...
I hope your problem gets solved... Next time be a little more cautious when taking such a risky step... See what are all the options you have before jumping into something...
X10MINISTER said:
Did ur unlocking bootloader succeed?
Click to expand...
Click to collapse
I guess it did because when I reboot it I get that bootloader unlocked splash screen.
Tyakrish said:
Did you try relocking the bootloader ?
1) Try relocking the bootloader using the methods described here :
https://forum.xda-developers.com/max-pro-m2/how-to/unroot-relock-bootloader-max-pro-m2-t3885870
See if it successfully relocks...
If it does, then next time unlock using the unofficial method only...
2) If not then maybe try contacting ASUS... Tweet them on Twitter... Companies usually respond very fast on Twitter, since their reputations are at stake...
3) All else fails then try rooting it using something like Kingroot... Once rooted, flash TWRP Recovery using Flashify... then flash any custom ROM u want...
I hope your problem gets solved... Next time be a little more cautious when taking such a risky step... See what are all the options you have before jumping into something...
Click to expand...
Click to collapse
Tried everything except 2, none worked. I'll drop them a query over twitter like you say, let's see what their reply is.
I am on stock recovery, non working bootloader but unlocked, and stock rom unrooted.
I think Pie update may give some insight on fixing this.
Mr147 said:
I guess it did because when I reboot it I get that bootloader unlocked splash screen.
Click to expand...
Click to collapse
I see.. did u've try using another laptop/pc? Sometimes antivirus blocking the tools that are needed for unlocking bootloader..
X10MINISTER said:
I see.. did u've try using another laptop/pc? Sometimes antivirus blocking the tools that are needed for unlocking bootloader..
Click to expand...
Click to collapse
I unlocked using official bootloader apk provided by asus. Now I have encrypted phone which isn't decrypting and can't flash twrp.
Mr147 said:
I unlocked using official bootloader apk provided by asus. Now I have encrypted phone which isn't decrypting and can't flash twrp.
Click to expand...
Click to collapse
Hey you said phone is encrypted ? Maybe this might work :
1) Download and install the latest Magisk Manager apk
2) Extract boot.img from stock firmware
3) Put boot.img in your internal storage and open magisk app.
4) Click on install and select patch boot Image.
5) Select stock boot.img file placed in phone memory.
6) Magisk will automatically patch the stock Image and this patched image can be installed using fastboot using this command:
fastboot flash boot patched_boot.img
This will root your phone. After that you can install Flashify to flash TWRP or PBRP
Note:
- This method is highly experimental... There are 50% chances of bootloop. I would not have recommended this method, but situation seems to demand it.
- Your data will most probably be formatted, so keep a backup.
- If it falls in a bootloop, then you need to flash original stock firmware to restore your phone.
Credits: @#ArtFuL
Who came up with this method, but removed it from the main guide, because of being experimental... (I guess)
Mr147 said:
I unlocked using official bootloader apk provided by asus. Now I have encrypted phone which isn't decrypting and can't flash twrp.
Click to expand...
Click to collapse
After going through the errors, I strongly believe that the problem is with your drivers. If reinstalling doesn't works, try a different pc. If your pc detects your device on MTP or your are able to perform adb operations without any hassle, it's not the problem with your phone.
You can decrypt the device only after flashing custom recovery.
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
Tyakrish said:
Hey you said phone is encrypted ? Maybe this might work :
1) Download and install the latest Magisk Manager apk
2) Extract boot.img from stock firmware
3) Put boot.img in your internal storage and open magisk app.
4) Click on install and select patch boot Image.
5) Select stock boot.img file placed in phone memory.
6) Magisk will automatically patch the stock Image and this patched image can be installed using fastboot using this command:
fastboot flash boot patched_boot.img
This will root your phone. After that you can install Flashify to flash TWRP or PBRP
Note:
- This method is highly experimental... There are 50% chances of bootloop. I would not have recommended this method, but situation seems to demand it.
- Your data will most probably be formatted, so keep a backup.
- If it falls in a bootloop, then you need to flash original stock firmware to restore your phone.
Credits: @#ArtFuL
Who came up with this method, but removed it from the main guide, because of being experimental... (I guess)
Click to expand...
Click to collapse
Yes this method is highly experimental. Also in this situation, he cannot use any fastboot commands. So this method won't work
#ArtFuL said:
After going through the errors, I strongly believe that the problem is with your drivers. If reinstalling doesn't works, try a different pc. If your pc detects your device on MTP or your are able to perform adb operations without any hassle, it's not the problem with your phone.
You can decrypt the device only after flashing custom recovery.
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
Yes this method is highly experimental. Also in this situation, he cannot use any fastboot commands. So this method won't work
Click to expand...
Click to collapse
This method didn't work, as fastboot isn't accepting any command. I tried giving command before connecting phone and then connecting, it gives me error of "File size is more than max allowed".
So is it done?
Mr147 said:
This method didn't work, as fastboot isn't accepting any command. I tried giving command before connecting phone and then connecting, it gives me error of "File size is more than max allowed".
Click to expand...
Click to collapse
See I recommend please use Linux (Manjaro or Ubuntu) , Windows will have driver issues forever and ever
had same issue after fota update UL-ASUS_X01BD-WW-15.2016
Tyakrish said:
Hey you said phone is encrypted ? Maybe this might work :
1) Download and install the latest Magisk Manager apk
2) Extract boot.img from stock firmware
3) Put boot.img in your internal storage and open magisk app.
4) Click on install and select patch boot Image.
5) Select stock boot.img file placed in phone memory.
6) Magisk will automatically patch the stock Image and this patched image can be installed using fastboot using this command:
fastboot flash boot patched_boot.img
This will root your phone. After that you can install Flashify to flash TWRP or PBRP
Thanks , this method work me. had same issue after fota update UL-ASUS_X01BD-WW-15.2016.1902.192-user
Click to expand...
Click to collapse
I've the same problem too. Let me know if you've configure it out. Thanks.
Okay @Mr147, I've fix this. I checked Windows Update and there was a pending ASUS driver update. I downloaded it and now I can use the fastboot commands.
Anyone that can fix this problem? I also experience this.
Mr147 said:
Hi guys,
I am using Zenfone Max Pro M2. I wanted to install a custom rom and I tried to unlock bootloader but I unlocked it through official unlocktool. Now I can't flash anything or send any command through fastboot, whenever I do then it restarts the device.
When I try to keep the fastboot command running and then connect phone - it throws errors like "Fail - Too many links", "Fail - Write to device fail (No such file or directory)" or "Fail- Unknown command".
I tried unlocking bootloader with the unofficial way provided in https://forum.xda-developers.com/max-pro-m2/how-to/unlook-bootloader-root-asus-zenfone-max-t3885457
but it isn't working either, any fastboot command is rebooting the device although bootloader is unlocked.
How do I fix this?
EDIT: Things I have tried:
- Changing USB Cable and Port
- Reinstalling ADB and device driver
- Reunlocking bootloader from UnlockTool (don't know why I did that again)
- Unofficial way to unlock bootloader
None of it helped.
Thanks
Click to expand...
Click to collapse
I suggest to Unlock with unofficial step, or read the post https://www.blocknesia.com/2019/04/unlock-bootloader-dan-install-twrp-asus-zenfone-max-pro-m2.html

Categories

Resources