[Q] Windows Media video? - Thrive General

Can I do a modification to enable it after it's rooted?
I tried to play .wmv files with floor model but I have no luck.
I have a lot of ripped DVDs in .mp4 (480p) format, but I also have several .wmv files downloaded. The size will drastically increase if I re-encode to .mp4 without degrading quality.

i think its in /etc/media_profiles.xml in bottom of file, change to "yes" and save back.
remember to have system r/w

MKV
You can attempt to convert the files to MKV.
The system by default does not play back this file source but there is a player called Mobo Player available on the market.
I have done a few mp4 720p conversions to mkv 720p and I am pleased to say they worked while not being to to big (average size is 1-2gigs per 1.5hrs)

I have read reports that Diceplayer handles mkv files. You might want to give that a try.

Hello Friends If Your Looking For A Video Player to Play all types of Video
Check out MX Video Player and also don`t forget to download the codec for those video ,been watching all types of video on the go .peace

Related

Can the Vibrant play .mkv files?

I downloaded some Family Guy Episodes that are like 25MB each are .mkv files. I put them on my SD Card, and they play for a few seconds, and than a message pops up saying this video cannot be played. However, the video actually starts and I can see and hear everything. So is there a way for this message to not pop up? Thanks.
BigWorldJust said:
I downloaded some Family Guy Episodes that are like 25MB each are .mkv files. I put them on my SD Card, and they play for a few seconds, and than a message pops up saying this video cannot be played. However, the video actually starts and I can see and hear everything. So is there a way for this message to not pop up? Thanks.
Click to expand...
Click to collapse
The built in video player usually handles .mkv containers just fine. Having said that, .mkv is merely an advanced CONTAINER format that allows for the easy assembly of video, multiple audio streams, subtitle streams, chapters, so on and so forth.
The contents of those streams can be almost anything. And this is where your problem lies.
In the windows universe with advanced players like KMPlayer, GomPlayer, VLC, MPC, and advanced codec packs like Combined Community Codec Pack, it is easy to create a situation where your Windows PC will play pretty much everything you throw at it.
For us, though the native video player is probably the best one ever released on the Android platform, it is not perfect. I would imagine that those MKV containered episodes are using a codec for video or audio that the player is stumbling over, or one of those streams is using a bitrate or encoding method that the player hasn't accounted for.
So far in my experiences the built in player DEFINITELY does not like mkv's where the video format is AVC1 encoded using Nero Digital's version of the AVC1 encoder. Also, I've encountered audio issues with AAC audio. This isn't a problem with the AAC audio though, rather it's bad MKV stream header information where whatever tool was used to mux the MKV failed to put in proper bitrate info.
Bottom line, and I'm speaking from the experience of having over 3 terabytes of media on my media NAS server here at home, MKV containers do not necessarily have any "standards" to them, in the sense that being an MKV doesn't really tell you what the video and audio are within. This is just due to the nature of the MKV container format, but it is a problem slowly disappearing as more people use more standard encoding bitrates and codecs within these containers.
As a suggestion, visit the market and download ROCKPLAYER ARM7 version. When I've encountered video files the native player won't play, Rockplayer usually does (with the notable exception of anything using Nero Digital AVC1). Rockplayer is derived from the FFMPEG codebase, so it's a tad more forgiving in what it will play.
It's either another player, downloading a different set of those episodes, or re encoding those episodes...
Thanks RockPlayer Arm7 worked .
The rock player has been able to play videos (tv episodes) that I was not able to play with the default player. I don't know much about codecs, but it's worth a try.
My phone played some 1.4gb TV show episodes that are x264 video and dd5.1 audio 1280x720 (High definition) inside an MKV file just fine.
Maybe your phone was just having a fit because you were trying to watch episodes of family guy?
Lol, might've been. RockPlayer works though, so it's all good .
Anyone know if the full paid version of Rockplayer allows multiple audio and sub streams?
I need that BADLY.

[Q] MKV Playback

Removing a bunch of preloaded bloatware, I also tossed the My Files app and have been searching for a way to get MKV play back to work. I'm noticing RockPlayer has a way to force System Player, which I would assume is the phones default video player.
I've loaded 3 videos onto my phone, all of which have subtitles. One is a 480p with subtitles, plays fine perfect frame rate, etc. however there are no displayed subtitles. Rockplayer does have subtitles enabled.
Second video is a 720p with subtitles. Video plays fine and smooth, no subtitles displaying.
Third video is also 720p with subtitles and those are working. However, the MKV uses codecs for variable frame rate, which make the video lag terribly in certain parts. Playing this file directly through RockPlayer causes a ton of artifacting and lag about four times more than I am experiencing with the stock player.
Does anyone know how to fix these subtitle problems, or know if there is an additional or better way to load the videos than using RockPlayer?
Edit: And on that note, is there a way/app that will allow choosing specific audio track for a video, or will it always be stuck on the default for the file?
Couple things. The default media player on the epic has ZERO options. You can not configure it as far as I know. However, it plays 720p\1080p MKV files flawlessly. I usually navigate to my video files with a file explorer and open them with the default video player. If subtitles don't work out of the box, then you're pretty much screwed. I'm willing to bet the movie player on the other SGS phones have more options.
Rock player is a piece of doodoo. While it can play MKV files, it chokes on anything remotely high definition. Video playback is all kinds of terrible. Doesn't seem to be able to make use of the Epic's graphics processing.
Until Sammy gives us a video player with more options, I think you're out of luck with subtitles
Just a suggestion but hardcode the subs to the video file.
i too been looking for a video player that can play mkv with the subtitles
darknatas said:
i too been looking for a video player that can play mkv with the subtitles
Click to expand...
Click to collapse
You can try rock player, but it's really choppy with high quality movies. I think it supports subtitles. You can try it. It's free on the market.
hydralisk said:
However, it plays 720p\1080p MKV files flawlessly. I usually navigate to my video files with a file explorer and open them with the default video player.
Click to expand...
Click to collapse
For some reason, I can't get any of my 1080p mkvs to work. Do they need to be encoded in any particular way?
my problem is that the stock video player wont play any mp4 or mkv vids with more than 2 channels of audio. almost everything i have is 6 channel and wont play on the stock player. as stated above, i find rock player also to be boo boo at hi def playback. i can use headphones and get 5.1 audio, but not through the device speakers. any help?
"5.1" is simulated using a filter, but that method requires headphones to work, so that it can control exactly what each ear hears.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hey..if you guys haven't noticed mvideoplayer added MKV internal subtitle support for SGS phones..and from what I hear it uses the default hardware acceleration rather then software like rockplayer
austin thats another video player for you to try lol..if not I suggest taking it to the i9000 forum as for now all the development has been there and they had the phones longer.
gTen said:
Hey..if you guys haven't noticed mvideoplayer added MKV internal subtitle support for SGS phones..and from what I hear it uses the default hardware acceleration rather then software like rockplayer
Click to expand...
Click to collapse
Oh thank you for pointing this out! I just tested a few 720p MKV files and they played great! Not only that, but it was made by the same person who crated act1 video player. It remembers the position of every video you start and stop. I love it
I was hardcoding subs until I foudn mvideoplayer a couple of days ago. works fine on 80% of external subtitle formats, even allows positioning and font control. it is great.
no more hardcoding subs or worrying about demuxing and increasing audio gain for me!
Cool, thanks for the recommendation. RockPlayer couldn't do HD, so I was looking for another player that was actually hardware accelerated.
And it's free to boot!
I love you guys. This is exactly what I needed.
works perfect with my 720p anime videos with subtitles. had been looking forever and finally this program did the trick. thanks guys
I loaded up an MKV TV show with 720p h.264 and 6 channel AC-3 and it worked flawlessly. I tried playing a 1080p mp4 file with 6 channel AC-3 and couldn't open it. I'm going to try a 1080p mp4 with 6 channel AAC.
If that doesn't work then I'll be pretty disappointed but not by much. I know the S5PC110 supports 1080p recording and playback. It's likely Samsung lowered the DSP clock to save power.
arashed31 said:
I loaded up an MKV TV show with 720p h.264 and 6 channel AC-3 and it worked flawlessly. I tried playing a 1080p mp4 file with 6 channel AC-3 and couldn't open it. I'm going to try a 1080p mp4 with 6 channel AAC.
If that doesn't work then I'll be pretty disappointed but not by much. I know the S5PC110 supports 1080p recording and playback. It's likely Samsung lowered the DSP clock to save power.
Click to expand...
Click to collapse
The only point in trying to put on a 1080p movie is if that is the format you already have. If you're ripping your own movies, you should probably rip them to the resolution of the phone. Anything higher than 480p is overkill. 1080p is double the resolution of the phone. Have you tried a 1080p MKV?
For some reason when i try to copy over a 1080p movie that is 6GB, it says the file is too large for the destination device's file system... even though I have about 11GB free.
hydralisk said:
The only point in trying to put on a 1080p movie is if that is the format you already have. If you're ripping your own movies, you should probably rip them to the resolution of the phone. Anything higher than 480p is overkill. 1080p is double the resolution of the phone. Have you tried a 1080p MKV?
For some reason when i try to copy over a 1080p movie that is 6GB, it says the file is too large for the destination device's file system... even though I have about 11GB free.
Click to expand...
Click to collapse
Thats normal..you have to break it up into either 2gb pieces or 4gb pieces (don't remember off the top of my head)...and it will work...this is actually where Kies I hear is good for..it automatically breaks up the video file for you if you use it. (unfortunately due to TW3 being missing we can't use Kies)
The limit is 4GB and this is due to the FAT32 file system. If android could read exFAT or NTFS there wouldn't be that limitation.
hydralisk said:
The only point in trying to put on a 1080p movie is if that is the format you already have. If you're ripping your own movies, you should probably rip them to the resolution of the phone. Anything higher than 480p is overkill. 1080p is double the resolution of the phone. Have you tried a 1080p MKV?
Click to expand...
Click to collapse
The only 1080p MKVs I have are over 4GB. Even if the phone could play 1080p MKVs, it can't play the DTS audio in the movies I have.
I usually get m2ts contained movies with AC-3 audio that stream perfectly to my Xbox 360 and also work locally on PS3s.

Video Format Playback (AVI)

Hey everyone,
I've been trying out all the different apps that claim to be able to play an impressive array of video formats, but none of them can play a simple avi video file (even though it says avi support/playback in the app descriptions).
So, my question for you is, have any of you discovered a way to watch avi files, or any other video formats on the legend without flat out converting it to a playable format? (ex wmv, 3gp, mpeg are the ones supported i believe). Post your comments/thoughts/experiences!
Thanks for reading,
Michael
yxplayer or something like that, and rock player are doing just fine for me...
Vplayer is good
Sent from my HTC Legend
Just for the record, note that AVI is not a video format but a video container.
An AVI video can be encoded in MPEG4, WMV and so on, so even all the players claims they can play AVI videos, that doesn't meant they can play all the formats found in AVI files.
FYI: http://en.wikipedia.org/wiki/Audio_Video_Interleave
And: http://en.wikipedia.org/wiki/Comparison_of_container_formats
Never the less it's not the format that is not supported by the Android core, it's the container...
That's why AVI video will consume much more computing power, the program just has to calculate those frames "manually"...

How to play WMV

I have been trying for a week to get WMV files to play on my Xoom. I have tried Rockplayer, Moboplayer, and vital player but none of them will play these files. I have even tried converting the files to mp4 but that takes the file size from 8 mb to 160 mb. These files are training videos that I really need to have on my Xoom so I can study while I am traveling. Can anyone please help me out?
Handbrake will convert WMV to MP4. It can be as simple as
handbrake -i infile.wmv -o outfile.mp4
(Sorry, I only use the CLI version, but GUI version should be similar.)
WMV is a container like AVI, and the actual MS codec will vary. Some MS codecs aren't well supported, and may cause issues.
Use mobo player v6. I use that on my xoom and it plays WMV files with no issues.
I have tried Moboplayer v6 but all it does is open a screen for a second then goes back to the file list. Does handbrake not increase the size of the file?
>Does handbrake not increase the size of the file?
It depends. However, H.264 is an efficient codec. If resultant size is >150% of original, conversion is bad.
If WMVs are from commercial source, they may have DRM. Can't convert DRM'ed media, nor can they be played on Android currently.
Just use Total Video Converter..then it gives you options of Low,Normal or High settings..the lower the setting the smaller the resulting file size will be.I've done tons of WMV's with it.

[Q] Copy Movies ??

Hi .
SO i just got my Glaxy tab and i am trying to move a few video files from my PC to the tab .
When i try to copy them Windows 7 suggest me to convert them .
So when i am copying MP4 files without convert they look so small that i can bearly see anything . But if i try to convert them i takes about 3 hours to copy a 500MB file ?
When trying to copy WMV file without converting it doesnt work ...
Any suggestion or best practice on moving video files to the tab ?
I have movies in mp4 and m4v and they also look small in the included video player. However, in mVideoPlayer they fill the screen just fine.
I just downloaded a 700mb file via Dropbox and it took about 25 minutes.
Convert them using your own software then transfer them over, or don't convert and use a different video player that can stretch your video (Rock Player, mVideoPlayer, VPlayer).
imo this is the place the tablet is the most lacking - default video player is absolutely balls.
Tinofet said:
Hi .
SO i just got my Glaxy tab and i am trying to move a few video files from my PC to the tab .
When i try to copy them Windows 7 suggest me to convert them .
So when i am copying MP4 files without convert they look so small that i can bearly see anything . But if i try to convert them i takes about 3 hours to copy a 500MB file ?
When trying to copy WMV file without converting it doesnt work ...
Any suggestion or best practice on moving video files to the tab ?
Click to expand...
Click to collapse
Use MoboPlayer. Its free and they have a codec for 3.1 tabs that plays anything. You can also view default size, full screen, vertical stretch, and 16:9. Definitely the was to go...just drag/drop, deny conversion, and play with MoboPlayer.
MKV Video Format Supported?
slal said:
Use MoboPlayer. Its free and they have a codec for 3.1 tabs that plays anything. You can also view default size, full screen, vertical stretch, and 16:9. Definitely the was to go...just drag/drop, deny conversion, and play with MoboPlayer.
Click to expand...
Click to collapse
Does that include mkv HD movies as well?
Yeah, supports 720p mkv, dunno about 1080p.
Seihaku said:
Yeah, supports 720p mkv, dunno about 1080p.
Click to expand...
Click to collapse
It did not support 1080p for me. I had the same video file in both 720p and 1080p. Mobo played the 720p perfectly, but would not open the 1080p version.
I dont think you need to convert anything. Just copy the file and play it in Mobo Player or Rock player. I think you can ignore the Windows notification and try the playback on the Tab first.
720p works fine
tlegower said:
It did not support 1080p for me. I had the same video file in both 720p and 1080p. Mobo played the 720p perfectly, but would not open the 1080p version.
Click to expand...
Click to collapse
I just tested the 720p and it works beautifully. Also works for mkv movies I just loaded! Fantastic!!
Another option is to use a program like xmedia recode to convert the file into native resolution for the tab; and in a container which is compatible, then push it to you tab.
This is usually how I get my movies to work on my droid; haven't tried it yet, but it's on the list of things to do tonight.
for those that say they've had luck with the MKV container, can you share your encoding profile? I've not been able to get a high profile encoded video to play in an mkv container. I can demux & remux into an mp4 container and the same video works. But, I loose the ac3 audio.
Still at work.
rcrh said:
for those that say they've had luck with the MKV container, can you share your encoding profile? I've not been able to get a high profile encoded video to play in an mkv container. I can demux & remux into an mp4 container and the same video works. But, I loose the ac3 audio.
Click to expand...
Click to collapse
I didnt encode the mkv movie that I have...I snagged it from my brother but when I get home tonight I'll look it up and post it back here.
Transferring movies
I usually use SwiFTP and Cyberduck to transfer movies to my IO tab. Since I'm on a mac, there's no native usb transfer capability, and it only takes about 3 minutes to transfer a 700mb avi.
Thanks.
Mine are encoded with High L4.0. I think MKVs will only work if they are L3.1 or lower.
I for one would just let windows convertthem. It takes forever but it works perfectly. Did this with RED 720p and rhe movie played flawlessly in diff media playes. Didnt do it with a 720p episode of southpark and all media players had good audio but video was lagging behind. Mobo almost had it in sync but even that was off by a bit. Gonna go convert a bunch of music videos andput those suckers onhere
stat1124 said:
I just tested the 720p and it works beautifully. Also works for mkv movies I just loaded! Fantastic!!
Click to expand...
Click to collapse
then what the heck is wrong with my 10.1, it plays video great, but no sound in moboplayer

Categories

Resources